Title: PSU question Post by: chitolsp on May 24, 2014, 08:42:31 PM I just wanna know if i can put one BFL Single 60Gh and 2x R9 280x in 1000W PSU.
http://www.amazon.com/Sapphire-Version-PCI-Express-Graphics-11221-00-25G/dp/B00GRNUL2G/ref=sr_1_6?ie=UTF8&qid=1400964054&sr=8-6&keywords=sapphire+r9+280x (http://www.amazon.com/Sapphire-Version-PCI-Express-Graphics-11221-00-25G/dp/B00GRNUL2G/ref=sr_1_6?ie=UTF8&qid=1400964054&sr=8-6&keywords=sapphire+r9+280x) Thanks! Title: Re: PSU question Post by: vm1990 on May 24, 2014, 09:05:31 PM I'd say yes but I'm not 100% sure what the power specs are the GPUs would take around 250 each non over clocked lower then voltage and get them down to a safe 200w and the attach the bfl rig should be pretty safe but make sure there's enough amps on the rails in the PSU to supply them safely also I'd but a watt o mater to make sure you inside the limits
Title: Re: PSU question Post by: bitgeek on May 25, 2014, 03:03:30 PM IMO yes. Single uses ~300W, R9 280x ~250W each, so you should make it. The only thing is a PSU can rarely support max output, especially in the long run, so you should have a margin here. Right now it's ~200W so don't push it more :)
|