|
Title: Garden Blade Setup Help Post by: Cloverleaf762 on May 26, 2014, 11:10:34 PM We have a friend who acquired a bunch of odd BTC mining gear on a budget. As such it is a lot different from the KnC's and BFL's we are running, so we are not sure what to do with it. Unfortunately he came to us looking for help and I am now a bit lost. Of course I thought it would be a piece of cake before we started this...
He has 8 Garden Blade Miners. They seem to power up OK, but I can not for the life of me log into them. I have scanned every IP after setting them up on a private net from 192.168.0.0 to 192.168.255.255 and I can not find the damned things. IP listed on the sticker is 192.168.1.201 port 10000. Dose anyone know anything about them, or how to default them to factory settings, and what the factory default IP would be so we could get into them and set them up? ??? Title: Re: Garden Blade Setup Help Post by: vm1990 on May 27, 2014, 08:16:18 AM If its anything like basic miner blades then there should be either a connector or 2 solder points along the side with the Ethernet adapter on that say reset. Should be a guide around here if you use the search :D
Title: Re: Garden Blade Setup Help Post by: Soappa on May 27, 2014, 04:50:21 PM He has 8 Garden Blade Miners. They seem to power up OK, but I can not for the life of me log into them. I have scanned every IP after setting them up on a private net from 192.168.0.0 to 192.168.255.255 and I can not find the damned things. IP listed on the sticker is 192.168.1.201 port 10000. Dose anyone know anything about them, or how to default them to factory settings, and what the factory default IP would be so we could get into them and set them up? I have completely no clue on this, but I found this setup guide for you (http://eastshoretrade.blogspot.com/2014/01/setup-tutorial-btc-minergarden-8gh-asic.html) with google search. Title: Re: Garden Blade Setup Help Post by: Cloverleaf762 on May 27, 2014, 05:04:17 PM He has 8 Garden Blade Miners. They seem to power up OK, but I can not for the life of me log into them. I have scanned every IP after setting them up on a private net from 192.168.0.0 to 192.168.255.255 and I can not find the damned things. IP listed on the sticker is 192.168.1.201 port 10000. Dose anyone know anything about them, or how to default them to factory settings, and what the factory default IP would be so we could get into them and set them up? I have completely no clue on this, but I found this setup guide for you (http://eastshoretrade.blogspot.com/2014/01/setup-tutorial-btc-minergarden-8gh-asic.html) with google search. I found them and some others, but it has not done us much good. The basics seem simple enough, they just are not working. I did set them up on a closed network with a range of 10.0.0.1 to 10.0.1.255 and scanned that. In that range I did manage to find the IP's they were at. Knowing the IP's I thought it would be easy to simply type the IP (I.E. 10.0.0.117:10000) into a we browser and log in to the interface to change the IP and pool settings. No such luck. They seem to be active, and we can now see the IP's, but as of yet it will not let us log in...:( Makes me happy all of ours are Block Erupter, BFL, and KnC units. Title: Re: Garden Blade Setup Help Post by: Soappa on May 27, 2014, 05:12:59 PM He has 8 Garden Blade Miners. They seem to power up OK, but I can not for the life of me log into them. I have scanned every IP after setting them up on a private net from 192.168.0.0 to 192.168.255.255 and I can not find the damned things. IP listed on the sticker is 192.168.1.201 port 10000. Dose anyone know anything about them, or how to default them to factory settings, and what the factory default IP would be so we could get into them and set them up? I have completely no clue on this, but I found this setup guide for you (http://eastshoretrade.blogspot.com/2014/01/setup-tutorial-btc-minergarden-8gh-asic.html) with google search. I found them and some others, but it has not done us much good. The basics seem simple enough, they just are not working. I did set them up on a closed network with a range of 10.0.0.1 to 10.0.1.255 and scanned that. In that range I did manage to find the IP's they were at. Knowing the IP's I thought it would be easy to simply type the IP (I.E. 10.0.0.117:10000) into a we browser and log in to the interface to change the IP and pool settings. No such luck. They seem to be active, and we can now see the IP's, but as of yet it will not let us log in...:( Makes me happy all of ours are Block Erupter, BFL, and KnC units. Maybe you could try to make another thread in the mining support section (https://bitcointalk.org/index.php?board=40.0), and hopefully you can find people used or still using the miner. Good luck. :) |