|
Title: PDU Recommendations Post by: psjw4450 on May 28, 2014, 11:40:55 PM I have a 200 amp single phase service setup just for mining and was wondering what PDU would be recommended for setting up 20 Antminers S2.
Title: Re: PDU Recommendations Post by: TyrTheAlpha on May 29, 2014, 01:54:14 AM Great question. O'Wise Ones please answer with pictures and links :)
Title: Re: PDU Recommendations Post by: klondike_bar on May 29, 2014, 04:13:31 AM IMHO go with whatever you find cheapest. My two suggestions:
1) L6-30 outlets and PDU. 30A gives you about 5kW of safely usable power. i suggest buying the outlets ($50 new) on ebay for <$20. 2) use regular 120V components but swap a neutral for a hot. Its the absolute cheapest and easiest way and is safe for hardware (not sure if its safe for a surge protector?). However, this is very much against code. if someone plugged in a 120V appliance not knowing it was a 208V circuit they would explode. or whatever happens when a basic 120V appliance is extremely overloaded in a split second... Title: Re: PDU Recommendations Post by: ZiG on May 29, 2014, 05:24:20 AM I have a 200 amp single phase service setup just for mining and was wondering what PDU would be recommended for setting up 20 Antminers S2. Super...! What VOLTAGE is it...110V or 208V...? ZiG Edit...: ...Single phase...110V...I guess... ;) Title: Re: PDU Recommendations Post by: xjack on May 29, 2014, 11:15:30 PM For 120v I'm using Web Power Switch and Ethernet Power Controller II from http://www.digital-loggers.com/
For 240v I'm using an APC 7911A. These are all switched/metered. You'll save a bundle if you don't need management features. OP, you mentioned PDU. For 20 OC'd antminers, you're going to need PDUs - plural. Title: Re: PDU Recommendations Post by: ZiG on May 30, 2014, 01:14:08 AM For 120v I'm using Web Power Switch and Ethernet Power Controller II from http://www.digital-loggers.com/ For 240v I'm using an APC 7911A. These are all switched/metered. You'll save a bundle if you don't need management features. OP, you mentioned PDU. For 20 OC'd antminers, you're going to need PDUs - plural. APC 7911A is 20 outlets...for about $650 & change... ;D I just bought APC 7571A ...10 outlets ...for $99 ... ;) Both are 208V ... ZiG Edit : I have 10 Ants S1...you will need 2 of these... |