Title: Technobit Avalon Gen2 Power ?? Post by: kmaikaza on June 16, 2014, 05:56:03 PM Helo Wourld
I need help i have this board http://technobit.eu/index.php?id_category=12&controller=category&id_lang=1 Do i need to have 5 v and 12v conectred or only 12v and usb cable I am not runing in from a pc but from a Hp mini laptop to save power only 30W and will power the miner from a old laptop power suply 12W@10A Title: Re: Technobit Avalon Gen2 Power ?? Post by: marto74 on June 16, 2014, 06:30:03 PM Helo Wourld You need only 12 v power and USB for data.I need help i have this board http://technobit.eu/index.php?id_category=12&controller=category&id_lang=1 Do i need to have 5 v and 12v conectred or only 12v and usb cable I am not runing in from a pc but from a Hp mini laptop to save power only 30W and will power the miner from a old laptop power suply 12W@10A 12 v is on molex or wire terminal. 10 A is on the edge Title: Re: Technobit Avalon Gen2 Power ?? Post by: kmaikaza on June 17, 2014, 07:50:32 AM TXN
it does seams to be alive but now i am detecting it but not hashing look at print scr if you have time http://s28.postimg.org/nfr7k0tvt/bjelo.jpg (http://postimg.org/image/nfr7k0tvt/) http://s23.postimg.org/p3fuenafb/crno.jpg (http://postimg.org/image/p3fuenafb/) Title: Re: Technobit Avalon Gen2 Power ?? Post by: Zich on June 17, 2014, 08:50:25 AM Set pool to : http://localhost:8332
Set frequency to : 1500 Set voltage to : 1100 uncheck: test only But please consider to use TPLINK TL-MR3020 as host. Cheap & small power consumption. Title: Re: Technobit Avalon Gen2 Power ?? Post by: kmaikaza on June 17, 2014, 01:13:18 PM ok i did that it power on and everything but i get eror that authorization not ok and i did try more pools .
http://s27.postimg.org/drufssiu7/asadaada.jpg (http://postimg.org/image/drufssiu7/) what now And thanks for all your help Title: Re: Technobit Avalon Gen2 Power ?? Post by: Zich on June 17, 2014, 01:27:04 PM That's seem normal message. You are not using xxx as password right?
Please post the HEXMINER screen shot. Title: Re: Technobit Avalon Gen2 Power ?? Post by: kmaikaza on June 17, 2014, 02:19:57 PM http://s28.postimg.org/z09g8zf49/aaa.jpg (http://postimg.org/image/z09g8zf49/)
And i have red and green led on no flashing , the 12v rail is active i did probe with multimeter on the board and i get 12 v on some areas but the fan conector i am geting 0v. and when i connect the 12v and ted power on i get 0.05A standby and does not go up wen i star the miner Title: Re: Technobit Avalon Gen2 Power ?? Post by: marto74 on June 17, 2014, 08:29:09 PM try to remove the Diode like part on the power connector, or just send it for RMA
Title: Re: Technobit Avalon Gen2 Power ?? Post by: kmaikaza on June 18, 2014, 06:45:36 AM It is all weird i connected 5v rail and now my fan works .
All the chips have 3.29v supply on one of the pins. And next to the Motorola micro controller i am geting twice 12.12v psu voltage and 8.6 and 8.9 And i ship it over your site , and i dont have to send the cooler just the pcb to save on shipping. Title: Re: Technobit Avalon Gen2 Power ?? Post by: marto74 on June 18, 2014, 07:11:58 AM ok
|