Bitcoin Forum

Bitcoin => Mining support => Topic started by: Tek101 on June 18, 2014, 04:57:17 AM



Title: Avalon Miner part help
Post by: Tek101 on June 18, 2014, 04:57:17 AM
Hello,

I am new to the forum and mining bitcoin (have 2 S1's and the hulky beast avalon thee 200 gh one). My question though is this my Avalon miner was working perfectly with it overclocked at 1400 freq hashing at +- 10% 220 gh/s. it recently dropped to a stagnant 160-70 gh/s. so being pretty decent a figuring things out I investigated the situation. First I moved it to a new location to see if the wifi was being disrupted. But, I got the same result after leaving it there for a few hours. then I stopped it and looked to see if maybe some wiring got loose but, that was also not the case. After looking around at the wires for a bit I did find that one of the capacitors had come off and was laying in the encasement. So I knew this was part of the problem. Upon looking at the board it turns out that I am missing maybe 3 or 4 more capacitors. Back to my question though, I know how to solder so I  was wondering if some of you kind folk could direct me to a place I can buy some spare capacitors so I can solder them back on the board.


the ones I am looking for are the ones in the bottom left of this link. The C1's. can't buy them directly from them and can't find them anywhere

http://www.szleson.com/en/product.asp?classid=4


Thx



Title: Re: Avalon Miner part help
Post by: Tek101 on June 23, 2014, 01:57:19 AM
no help on this?