Bitcoin Forum

What is the LATEST version of BAMT that I can download and add to my USB stick to boot my Miner with ready to go Scrypt, Scrypt-n, x11, x13, Keccak etc. sgminer so all I have to do is to edit the conf file and start Mining..

Please help me out here, need the MultiAlgo BAMT version with one sgminer that can mine anything by only configuring the conf file..

My miner is not working right now, TIME is Money, Please help me out here..

You could try PIMP. 

http://getpimp.org/

Thanks for Your comment, I really would appreciate a BAMT version that has a sgminer that can Mine any algo Scrypt, Scrypt-n, x11, x13, Keccak etc.

I got used to BAMT so I would not like to lose time to get familiar with a new OS.

Would really appreciate if anyone could give me a LINK where I can download the Latest BAMT version that has a sgminer that can Mine any algo Scrypt, Scrypt-n, x11, x13, Keccak etc. by just editing the config file with the desired config settings.

I'm using BAMT 1.6.2 mining x11 and 14.6 drivers. You set all of your configs, then change the miner in the BAMT file. If you need help, PM me.  :)

All running on BAMT http://cgminermonitor.com/Shared/514cafc819b54fe1bb817cb178a2e3510 (http://cgminermonitor.com/Shared/514cafc819b54fe1bb817cb178a2e3510)

Great to see You are up and running..

Can You please explain where to download the latest BAMT version that can mine any algo ?

Do You mine only scrypt and x11 with 1.6.2 or other algos as well..?

It can do the other Algo's as well, however I have only mined x11 and scrypt with it. https://litecointalk.org/index.php?topic=2924.msg19416#msg19416 (https://litecointalk.org/index.php?topic=2924.msg19416#msg19416)  I'm using 1.6.2. Upgrades to the newest drivers and modded miners will have to be done manually though. But it's not too hard, 6 months ago I barely knew any linux, now I can navigate pretty well through it.

Great I am downloading the 1.6.2.

If I am correct I can just edit the conf file with my x11 pool data user name and password and start Mining x11 algo with ?

Almost, you will need to edit the "bamt.conf" file to instruct BAMT to choose the right miner.

https://i.imgur.com/ttZ0aCw.png?1

Let me know if you need help.

Really thanks mate for the help..

How can I instruct BAMT to use the desired miner..
If I am correct I need just to add Nr. 1 after the desired Miner I would like to use ?

Correct put a 1 after the miner to use, for X11 it would be sgminer-sph; and remove the # in front of "cgminer-opts" for the same miner.  Don't forget to put a # in front of the last line for the default cgminer; the #omits the line.

Great really thanks mate, one last question..

When selecting sgminer-sph the way you described what file do I need to edit : the sgminer-sph.conf file or the cgminer.conf ?

You will edit the sgminer-sph.conf file

Thanks for the instructions,

I will give it all a try tomorrow and let you know how it turned out..

Once more, I really appreciate your instructions and time.

I got It up and running on Wafflepool x11, but I am getting only 2000 KH/s per one Sapphire R9 290 Card ( stats in sph-sgminer after I inpun screen -rd )..

I was expecting more, because the site http://www.whattomine.com shows me that 850 KH/s in Scrypt is about 3900 KH/s on X11 Algo..

What am I doing wrong here, 2000 KH/s is WAY to low..?

Here are my settings..

{
    "pools": [
     {
       "poolname"    : "WafflePool-Eu",
         "url"    : "stratum+tcp://eu.wafflepool.com:3331",
       "user"   : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
       "pass"   : "x"
        },
        {
       "poolname"    : "WafflePook-East",
         "url"    : "stratum+tcp://useast.wafflepool.com:3331",
       "user"   : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
       "pass"   : "x"
        },
        {
       "poolname"    : "WafflePool-West",
         "url"    : "stratum+tcp://uswest.wafflepool.com:3331",
       "user"   : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
       "pass"   : "x"
        }
    ],
"kernel": "darkcoin",
"intensity": "20",
"thread-concurrency": "28500",
"auto-gpu": true,
"auto-fan": true,
"temp-target": "75",
"temp-overheat": "90",
"temp-cutoff": "95",
"gpu-threads": "1",
"queue": "0",
"worksize": "512"
}

P.s. On the Pool side I am getting from 2 MH/s to 9 MH/s ( always jumping around ) with 0% reject rate..

Can someone tell me what is wrong here..

anyone..

get PiMP with the 14.6 drivers, the version is: 1.5.51 with the red button over here => http://getpimp.org/downloads.html
doing 4300 kh/s with r9 280x gigabyte v2
Proof:
https://i.imgur.com/v7Zlikc.png

Thanks for the reply..I never used PIMP before, how to set up everything, does it come preconfigured ?

My cards are Sapphire R9 290, what hashrate can I expect ?

here is the getting started guide... it's easy

http://getpimp.org/support/getting-started.html

on my 290 tri-x i get 5k on x11

I can't write the image to my USB..Done everything correct, after the WRITE is completed I click on F drive ( my USB drive ) and it says :

Disk F is not formatted, do you want to format it now..

I clicked Yes, selected FAT32 and clicked START and it says format complete..

After that I again open WIN32DiscImager, select the pimp.img file and click write to F and after I am done I again go to F drive ( my usd drive ) to see if the files are there and after I click on F drive it again says Disk F is not formatted, do you want to format it now..

What could be the issue here, done writing files to USB million times so far with no issues what so ever, what could be the problem, my USB run BAMT 1.6.2. before, it has 4GB..?

pimp image is ext4 windows cant read it
just write it and then boot your rig from it

...

Thanks everyone for recommending PIMP..

So far so good, all 3 rigs are working fine and I am getting 50 MH/s total hashrate ( 4500 per card )..

I have one question..Is there a way to push them even harder, temps are about 75C and Fan speed about 65%..

P.s. Every couple of hours my rigs stop mining, they are still working but I can not connect to them remotely so I need to manually restart the miner to remote connect again..

What could be the problem..

Here are my settings..

{
"pools" : [
    {
        "notes" : "PiMP Donations/Testing - X11 1",
        "url" : "stratum+tcp://eu.wafflepool.com:3331",
        "user" : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
        "pass" : "x"
    },
    {
        "notes" : "PiMP Donations/Testing - X11 2",
        "url" : "stratum+tcp://useast.wafflepool.com:3331",
        "user" : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
        "pass" : "x"
    }
]
,
"auto-fan" : true,
"intensity" : "17",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "0",
"shaders" : "0",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-engine" : "0-0",
"gpu-memclock" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.00",
"gpu-fan" : "0-100",
"temp-hysteresis" : "3",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "80",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"expiry" : "20",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Glad you got it working Cro. Sorry I was away from the forum this weekend.

Thank You my friend..No problem, hope You had a nice weekend.

P.s. So far they are working fine 12h with no downtime..

Had the problem once with each miner..Restarted every miner and so far so good..

Unfortunately the Miners keep going down in the PIMP pool manager..Every 6-12h, what could be the problem..

I am using the 1.5.51 version with 14.6 AMD drivers..

My settings :

{
"pools" : [
    {
        "notes" : "PiMP Donations/Testing - X11 1",
        "url" : "stratum+tcp://eu.wafflepool.com:3331",
        "user" : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
        "pass" : "x"
    },
    {
        "notes" : "PiMP Donations/Testing - X11 2",
        "url" : "stratum+tcp://useast.wafflepool.com:3331",
        "user" : "1KcMuYnTN99hMGCrvZnroi2Eof4i6Zdssd",
        "pass" : "x"
    }
]
,
"auto-fan" : true,
"intensity" : "17",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "0",
"shaders" : "0",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-engine" : "0-0",
"gpu-memclock" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.00",
"gpu-fan" : "0-100",
"temp-hysteresis" : "3",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "80",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"expiry" : "20",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

I don't use PiMP, but does the computer crash and require a hard reset or does it just stop mining??  Also, what cards are you using?

can anyone tell me or give a guide on how to upgrade bamt/smos drivers to 14.6?

i am able to mine x11,x13 etc on my old smos, but need to get newer drivers.

Charmees, I replied to your PM.

Hi there, I took those setings from the PIMP website..They are default settings for AMD cards..I have Sapphire R9 290 Cards..

what settings do you use for r9 270? and how much hashrate you get for x11/x13 ?

Engine 1125, Memclock 1500, Worksize 256, I 20. ~ 2600KH