Title: hashfast 0.7 TH hashcoins apollo miner for sale Post by: bcmine on July 03, 2014, 06:51:58 PM https://www.hashcoins.com/buy-asic-miners/buy-apollo/
System Specifications Contains (1) 28nm ASICs Performance: 700 GH/s at nominal clock speed. At the wall, this unit consumes 0.85 watt per gigahash +/- 20% Chassis: Corsair Graphite 230T Corsair Hydro Cooling System 1 Internal High performance Corsair power supplies Connects via USB to a computer of your choice running cgminer (a control unit, see below) Recommended Control Unit Win/Mac (desktop, laptop), with the following: 1G RAM, 50GB or larger disk, at least one USB port I.e., most any computer that can run CGMiner Needs an ethernet port to connect to the internet Needs one USB port per miner Linux: Raspberry PI controller is preferred. Chip Specifications 28nm ASIC Hashing Output: 700 GH/s at nominal clock speed (overclocked up to 750 GH/s) Power Consumption at the chip: less than 0.65 W/GH/s +/- 15% Designed to be underclocked for greater efficiency, and overclocked for greater performance. ** USB is a standard protocol. An OSX or Windows box running CGMiner will probably work fine as a control unit. But we are doing our development work on Windows boxes, and so we recommend using a Windows box for your controller. Title: Re: hashfast 0.7 TH hashcoins apollo miner for sale Post by: crashoveride54902 on July 04, 2014, 04:06:52 AM https://www.hashcoins.com/buy-asic-miners/buy-apollo/ System Specifications Contains (1) 28nm ASICs Performance: 700 GH/s at nominal clock speed. At the wall, this unit consumes 0.85 watt per gigahash +/- 20% Chassis: Corsair Graphite 230T Corsair Hydro Cooling System 1 Internal High performance Corsair power supplies Connects via USB to a computer of your choice running cgminer (a control unit, see below) Recommended Control Unit Win/Mac (desktop, laptop), with the following: 1G RAM, 50GB or larger disk, at least one USB port I.e., most any computer that can run CGMiner Needs an ethernet port to connect to the internet Needs one USB port per miner Linux: Raspberry PI controller is preferred. Chip Specifications 28nm ASIC Hashing Output: 700 GH/s at nominal clock speed (overclocked up to 750 GH/s) Power Consumption at the chip: less than 0.65 W/GH/s +/- 15% Designed to be underclocked for greater efficiency, and overclocked for greater performance. ** USB is a standard protocol. An OSX or Windows box running CGMiner will probably work fine as a control unit. But we are doing our development work on Windows boxes, and so we recommend using a Windows box for your controller. this a joke right? you want 2k for 700gh/s? one S3 is 500gh/s for 500bucks hmmm which one do you think someone will pick? |