|
Title: Rig Ready, but Need Software Help Post by: elrodvoss on March 08, 2012, 03:48:54 AM Evening everyone,
Well, I got one of the three rigs ready to go, but im stuck at the software part. I have been advised to use BAMT, since these will be stand-alone rigs, but I am 100% ignorant when it comes to Linux. As it stands now, I have a naked 4gb flash drive ready to go, but I need a guide or step-by-step to go further. Basically, I need steps for Linux install, BAMT install, and how to "remote" monitor from a windows 7 based computer. Any help or direction would be grateful and rewarded. Thank in advance. -elrodvoss Title: Re: Rig Ready, but Need Software Help Post by: Splirow on March 08, 2012, 08:12:23 AM I will pm u
Title: Re: Rig Ready, but Need Software Help Post by: elrodvoss on March 12, 2012, 07:39:19 PM Well I got BAMT installed and I got one card working, but I am noticing a smaller issue.
I have the card clocked out at 900 GPU, but im only getting 214 hash on average and only 64% load. How can i improve the load and the hash. I only have the setting tweaked using the AMD Overdrive program and not through BAMT config yet. Could that be the issue? When I use GUminer, I get 300-320 from the same make and model of cards. Any help would be greatful. Title: Re: Rig Ready, but Need Software Help Post by: Splirow on March 12, 2012, 09:46:39 PM What card do you have?
Title: Re: Rig Ready, but Need Software Help Post by: kliffen on March 12, 2012, 10:53:39 PM Splirow, could you post the guide here? :)
I'm new to linux too, and with harddrive prices being high as they are, running miners of USB sticks would be pretty sweet! Title: Re: Rig Ready, but Need Software Help Post by: kliffen on March 12, 2012, 11:47:04 PM Take a look at this guide, not exactly what your after, but the first 6 steps show you how to create a bootable USB with linux. https://bitcointalk.org/index.php?topic=29021.0 Thanks alot :) Title: Re: Rig Ready, but Need Software Help Post by: elrodvoss on March 13, 2012, 01:27:11 AM What card do you have? Sorry forgot that little bit of info. Sapphire HD 5850 xtreame. Title: Re: Rig Ready, but Need Software Help Post by: Splirow on March 13, 2012, 06:16:37 AM Take a look at this guide, not exactly what your after, but the first 6 steps show you how to create a bootable USB with linux. https://bitcointalk.org/index.php?topic=29021.0 Thanks alot :) That is the guide for linuxcoin. I feel Bamt is way better, simple. |