|
Title: BAMT won't OC anymore Post by: PulsedMedia on March 11, 2012, 02:10:26 AM After a crash on one of my 58xx cards due to a bit too high clock, now BAMT refuses to set clocks for the high usage profile. Infact, the high usage profile memclock got applied to idle :/
Had to disable the GPU because @ stock voltages it's running hot and slower than an undervolted card :/ Any ideas what's going on? Title: Re: BAMT won't OC anymore Post by: david113 on March 14, 2012, 04:09:33 PM Hi
go to /bamt/status/active and delete files to enble GPU overclocking. It work for my! Title: Re: BAMT won't OC anymore Post by: PulsedMedia on March 15, 2012, 12:08:35 AM Hi go to /bamt/status/active and delete files to enble GPU overclocking. It work for my! thanks, but there is no /bamt dir ... Now this happened to other GPU, no crash involved or anything, all of sudden just overclocks are gone! noticed because hashing rate dropped a bit on the cluster ... Title: Re: BAMT won't OC anymore Post by: wknight on March 15, 2012, 07:18:14 PM The file is located
Code: /live/image/BAMT/CONTROL/ACTIVE/ Remove the file that is in there for the GPU that locked up Title: Re: BAMT won't OC anymore Post by: PulsedMedia on March 17, 2012, 06:32:24 AM now after failed underclocking it reports 0 GPUs >_< ffs
and no files in ACTIVE/ ** EDIT: Got it fixed :) Title: Re: BAMT won't OC anymore Post by: aaa801 on March 20, 2012, 11:20:29 PM how did you fix it!
Title: Re: BAMT won't OC anymore Post by: PulsedMedia on March 21, 2012, 05:23:31 AM how did you fix it! It was a simple boot failure, X didn't start automatically and as i were remote i didn't notice that at first. Title: Re: BAMT won't OC anymore Post by: aaa801 on March 21, 2012, 02:33:18 PM how did you fix it! It was a simple boot failure, X didn't start automatically and as i were remote i didn't notice that at first. Title: Re: BAMT won't OC anymore Post by: NetworkerZ on March 21, 2012, 04:15:20 PM I know that problem too. Reboot on SSH console doens't work for me, cause X doesn't somes up. I have to reset, then it works. It's only on one RIG out of 3.
Greetz NetworkerZ |