|
Title: Butterfly Labs Bitforce start up Post by: Rypert on July 12, 2014, 03:27:26 PM Hello guys, i need some help, i got the Butterfly Labs 60 GH BitForce miner, i connected it to EVGA Supernova 750 power supply (only 1 miner connected to the PSU) and then connected the USB from the miner into the hub where i have some Antminers U2. After some stuggle i was able to install the drivers, so i can see the miner in the device manager, however it has no port assigned to it. When i start the BFGMiner, it start all the ants that i have, but does not see the BitForce...
Can you please guide me in the direction on how to make the miner work. I'm very deperate to see the miner at work. THank you in advance. Title: Re: Butterfly Labs Bitforce start up Post by: Rypert on July 13, 2014, 01:28:53 AM i installed the Butterfly Labs software, and this is what i'm getting when i run it:
Starting miner... 33] Started bfgminer 4.4.0 [2014-07-12 21:21:33] No devices detected! [2014-07-12 21:21:33] Waiting for devices; press 'M+' to add, or 'Q' to quit [2014-07-12 21:21:33] Probing for an alive pool [2014-07-12 21:21:33] Testing pool http://us2.eclipsemc.com:3333 [2014-07-12 21:21:33] HTTP request failed: Empty reply from server [2014-07-12 21:21:34] HTTP request failed: Empty reply from server [2014-07-12 21:21:35] Stratum authorisation success for pool 0 [2014-07-12 21:21:35] Pool 0 http://us2.eclipsemc.com:3333 alive [2014-07-12 21:21:35] Network difficulty changed to 17.3G (124.1P) [2014-07-12 21:21:35] New block: ...1d30ec2e #310478 diff 17.3G (124.1P) [2014-07-12 21:21:35] Stratum from pool 0 detected new block [2014-07-12 21:21:36] API running in IP access mode on port 4028 [2014-07-12 21:21:56] 20s: 0.0 avg: 0.0 u: 0.0 h/s | A:0 R:0+0(none) HW:0/none [2014-07-12 21:22:16] 20s: 0.0 avg: 0.0 u: 0.0 h/s | A:0 R:0+0(none) HW:0/none [2014-07-12 21:22:36] 20s: 0.0 avg: 0.0 u: 0.0 h/s | A:0 R:0+0(none) HW:0/none [2014-07-12 21:22:56] 20s: 0.0 avg: 0.0 u: 0.0 h/s | A:0 R:0+0(none) HW:0/none here is my pool information: -o us2.eclipsemc.com:3333 -u rypert.worker -p 123qweasdzxc windows recognized the Bitforce miner and everything seems to be fine, yet it'snot mining anyways. Can someone please help. THanks in advance!!!!! Title: Re: Butterfly Labs Bitforce start up Post by: lowbander80 on July 15, 2014, 10:52:42 AM have you jump started the power supply to work all the time as if it was open???
Sometimes when I was running my USB miners along with a single I had there were conflicts on the ports try using another usb port of the computer not a hub and expect to have to restart it after 24-48 hours Title: Re: Butterfly Labs Bitforce start up Post by: Inaba on September 09, 2014, 03:30:58 AM You need to update your BFGminer. I don't believe 4.4.0 supports it. You need 4.6.x or better. Latest release is 4.7.0 I think.
|