Title: BAMT unresponsive Post by: aaa801 on March 20, 2012, 08:16:06 PM As soon as bamt starts mining it becomes completly unresponsive, cant access it over ssh or web attall
Title: Re: BAMT unresponsive Post by: hmblm1245 on March 20, 2012, 08:46:57 PM is the box frozen in that you cant ping it?
Title: Re: BAMT unresponsive Post by: BinaryMage on March 29, 2012, 05:47:08 PM Boot it, SSH in before the mining starts, run '/etc/init.d/mine stop'. Alternatively, disconnect it from the net and connect a monitor and keyboard. Then:
1. Edit /etc/bamt/bamt.conf to remove any OC, disable any cards not in your rig. 2. Edit /etc/bamt/pools to make sure you have correct pool configuration. 3. Run 'aticonfig --list-adapters'; make sure all of your cards are listed. 4. Run '/etc/init.d/mine start'. Unless you have bad hardware or a really screwed up configuration file, that should fix the problem. If that doesn't do it, post the result of 'lspci | grep Radeon' along with your configuration file (/etc/bamt/bamt.conf). Title: Re: BAMT unresponsive Post by: tnkflx on April 02, 2012, 01:56:08 PM What do you see when you connect keyboard and monitor? All my rigs are unstable under BAMT because of something with the NIC... Can you post your hardware?
Title: Re: BAMT unresponsive Post by: aaa801 on April 02, 2012, 04:52:29 PM I am no longer using bamt,
Title: Re: BAMT unresponsive Post by: Xmufa23X on April 02, 2012, 05:07:45 PM When BAMT boots up, do this before the mining starts:
>Ctrl+Alt+F1 >nano /etc/bamt/bamt.conf >Edit the lines that are causing issues (i.e. Core is too high) >Ctrl+X >y >Enter >shutdown -r now Upon restart, you will be mining with the new settings. Which in turn, will keep you from getting locked up. (I'm new with BAMT, and always locking it up as well. Still tweaking settings to get everything right.) Hope that helps Title: Re: BAMT unresponsive Post by: tnkflx on April 02, 2012, 05:59:42 PM When BAMT boots up, do this before the mining starts: >Ctrl+Alt+F1 >nano /etc/bamt/bamt.conf >Edit the lines that are causing issues (i.e. Core is too high) >Ctrl+X >y >Enter >shutdown -r now Upon restart, you will be mining with the new settings. Which in turn, will keep you from getting locked up. (I'm new with BAMT, and always locking it up as well. Still tweaking settings to get everything right.) Hope that helps I'm not overclocking, using stock speeds. When I attach screen and keyboard, the box is still up and X is running. It's only the NIC that doesn't work anymore... Title: Re: BAMT unresponsive Post by: BinaryMage on April 03, 2012, 12:04:30 AM When BAMT boots up, do this before the mining starts: >Ctrl+Alt+F1 >nano /etc/bamt/bamt.conf >Edit the lines that are causing issues (i.e. Core is too high) >Ctrl+X >y >Enter >shutdown -r now Upon restart, you will be mining with the new settings. Which in turn, will keep you from getting locked up. (I'm new with BAMT, and always locking it up as well. Still tweaking settings to get everything right.) Hope that helps I'm not overclocking, using stock speeds. When I attach screen and keyboard, the box is still up and X is running. It's only the NIC that doesn't work anymore... It doesn't work once you start mining, or doesn't work at all? The latter is an OS problem, not a BAMT problem. BAMT is just Debian 6 Live with some scripts, look up drivers for your NIC. The former is probably a lockup of some sort. Run Code: ps -A Title: Re: BAMT unresponsive Post by: tnkflx on April 03, 2012, 07:23:55 AM When BAMT boots up, do this before the mining starts: >Ctrl+Alt+F1 >nano /etc/bamt/bamt.conf >Edit the lines that are causing issues (i.e. Core is too high) >Ctrl+X >y >Enter >shutdown -r now Upon restart, you will be mining with the new settings. Which in turn, will keep you from getting locked up. (I'm new with BAMT, and always locking it up as well. Still tweaking settings to get everything right.) Hope that helps I'm not overclocking, using stock speeds. When I attach screen and keyboard, the box is still up and X is running. It's only the NIC that doesn't work anymore... It doesn't work once you start mining, or doesn't work at all? The latter is an OS problem, not a BAMT problem. BAMT is just Debian 6 Live with some scripts, look up drivers for your NIC. The former is probably a lockup of some sort. Run Code: ps -A It stops after a while. Machine boots fine, BAMT works fine, until NIC fails... Title: Re: BAMT unresponsive Post by: BinaryMage on April 03, 2012, 03:24:40 PM When BAMT boots up, do this before the mining starts: >Ctrl+Alt+F1 >nano /etc/bamt/bamt.conf >Edit the lines that are causing issues (i.e. Core is too high) >Ctrl+X >y >Enter >shutdown -r now Upon restart, you will be mining with the new settings. Which in turn, will keep you from getting locked up. (I'm new with BAMT, and always locking it up as well. Still tweaking settings to get everything right.) Hope that helps I'm not overclocking, using stock speeds. When I attach screen and keyboard, the box is still up and X is running. It's only the NIC that doesn't work anymore... It doesn't work once you start mining, or doesn't work at all? The latter is an OS problem, not a BAMT problem. BAMT is just Debian 6 Live with some scripts, look up drivers for your NIC. The former is probably a lockup of some sort. Run Code: ps -A It stops after a while. Machine boots fine, BAMT works fine, until NIC fails... Please post the results of Code: ps -A |