Bitcoin Forum

Bitcoin => Hardware => Topic started by: philipma1957 on July 19, 2014, 05:47:56 PM



Title: a few photos of how to make the s-3 beep less annoying.
Post by: philipma1957 on July 19, 2014, 05:47:56 PM
deleted 



Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: Soros Shorts on July 19, 2014, 07:48:32 PM
You could also use a hot glue gun and put a drop of glue into the hole of the buzzer. You'd be amazed at how quiet it becomes.

It is non-permanent and you can pull the glue off when you want the sound again.


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: Xian01 on July 19, 2014, 09:02:40 PM
You are a saint. Thanks for this thread. Will mod a bunch of 'em tonight.

Cheers !


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: Biodom on July 20, 2014, 01:13:44 AM
You are a saint. Thanks for this thread. Will mod a bunch of 'em tonight.

Cheers !

big thanks for mods:
"happy wife, happy life"  :)


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: pidge on July 21, 2014, 09:16:46 PM
I found that a M3 bolt screws nicely into the hole on top of the buzzer.


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: Pjones on July 22, 2014, 02:53:04 AM
I'd be concerned if the screw backed up. A piece of tape over the hole should do the trick?


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: kkurtmann on July 26, 2014, 07:20:50 AM
You are a saint. Thanks for this thread. Will mod a bunch of 'em tonight.

Cheers !

big thanks for mods:
"happy wife, happy life"  :)

true that!


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: pidge on July 26, 2014, 10:54:42 AM
I've not heard a beep out of mine (with the M3 screw in the hole).  And yes, I'm thinking about popping the lid an securing the screw in place with some tape.


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: Xian01 on July 26, 2014, 10:56:48 AM
FWIW, the new S3 firmware makes the units completely silent via the menu option now.


Title: Re: a few photos of how to make the s-3 beep less annoying.
Post by: vulcanology on October 22, 2014, 10:17:16 AM
FWIW, the new S3 firmware makes the units completely silent via the menu option now.

I have S3 firmware from September 2014, but that just reduces the beeping when set to false. When the internet connection drops, it still beeps. Is there another setting I should be looking at?

If it beeps at night and wakes my family, the S3 will be out of the house the next morning. Such a bad design. Thanks!