Title: Antminer S3 - Running at speed, then losing speed dramatically after 24 hours. Post by: aaronllewellyn on August 06, 2014, 12:46:00 AM I got two antminer S3's about two weeks+ ago, and since then I've had problems with one S3, it will run at 430-440/ghs for 10+ hours, but after a while it drops to 360/ghs then finally settles on 180/ghs and stays there, it's only fixed by hard-resetting the unit, then back to 440/ghs and repeat, requires you to reset it every 12 hours to maintain speed :C
My other S3 runs 440-450/ghs flawlessly both powered with a 750w Dell server PSU with breakout board. both are updated to the current firmware... should I contact my seller about a replacement? or is there a method to solve this problem, the firmware update seemed to solve it for a few days but now it's back to inconsistent speeds. They're in an AC'ed space and have adequate power. Any Ideas :C Title: Re: Antminer S3 - Running at speed, then losing speed dramatically after 24 hours. Post by: jowaybea on August 06, 2014, 01:02:05 AM Does it gain x's on the miner status page? You may have a victim of terrible thermal paste handiwork. Many people have had problems with the thermal paste on the heat sinks.
https://bitcointalk.org/index.php?topic=699064.msg8055187#msg8055187 |