Title: Antminer S3 kurulum Post by: batido on August 19, 2014, 03:26:51 PM Merhaba,
2 adet Antminer S3 aldım ve kurdum ancak kazı yapamıyorum sorun nereden kaynaklı olabilir acaba bilgisi olan varmı? Pool bilgilerini giriyorum ancak miner status kısmında hiç hareket yok Title: Re: Antminer S3 kurulum Post by: lorylore on August 19, 2014, 03:49:58 PM Hangi havuzdasınız?
Title: Re: Antminer S3 kurulum Post by: batido on August 19, 2014, 03:56:19 PM btcguild denedim olmadı
ghash.io denedim olmadı bitminter denedim olmadı :) hash alamıyorum miner status kısmında "This section contains no values yet" yazıyor sadece her bolumde biryerleri yanlış yapıyorum sanırım ama nereyi çözemedim. Title: Re: Antminer S3 kurulum Post by: DeepCoin on August 19, 2014, 04:08:40 PM Ekran goruntusu paylasabilirseniz daha iyi yardimci olunur bence.
Title: Re: Antminer S3 kurulum Post by: batido on August 19, 2014, 04:18:52 PM http://i.hizliresim.com/aPpVW2.jpg (http://hizliresim.com/aPpVW2)
http://hizliresim.com/aPpVW2 http://i.hizliresim.com/Z2pvJZ.png (http://hizliresim.com/Z2pvJZ) http://hizliresim.com/Z2pvJZ istediğiniz biryerin resmi varsa onuda paylaşabilirim system log: Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.000000] NR_IRQS:51 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.080000] Mount-cache hash table entries: 512 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.090000] NET: Registered protocol family 16 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.100000] MIPS: machine is TP-LINK TL-WR741ND v4 Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 0.100000] MAC FF:FF:FF:FF:FF:FF Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 0.100000] MAC 20:59:a0:c5:4c:68 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.560000] bio: create slab <bio-0> at 0 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.560000] Switching to clocksource MIPS Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.570000] NET: Registered protocol family 2 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.580000] TCP: Hash tables configured (established 512 bind 512) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.590000] TCP: reno registered Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.610000] NET: Registered protocol family 1 Thu Jan 1 02:00:11 1970 kern.debug kernel: [ 0.610000] PCI: CLS 0 bytes, default 32 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.640000] msgmni has been set to 119 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.650000] io scheduler noop registered Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.650000] io scheduler deadline registered (default) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.670000] console [ttyATH0] enabled, bootconsole disabled Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 0.690000] m25p80 spi0.0: found gd25q64, expected m25p80 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes) Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.700000] 5 tp-link partitions found on MTD device spi0.0 Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.700000] Creating 5 MTD partitions on "spi0.0": Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.710000] 0x000000000000-0x000000020000 : "u-boot" Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.710000] 0x000000020000-0x000000117db8 : "kernel" Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.730000] 0x000000117db8-0x0000007f0000 : "rootfs" Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.750000] mtd: partition "rootfs" set to be root filesystem Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000 Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data" Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.770000] 0x000000020000-0x0000007f0000 : "firmware" Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 0.770000] 0x0000007f0000-0x000000800000 : "art" Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.790000] libphy: ag71xx_mdio: probed Thu Jan 1 02:00:11 1970 kern.info kernel: [ 0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII Thu Jan 1 02:00:11 1970 kern.info kernel: [ 1.350000] eth0: Found an AR7240/AR9330 built-in switch Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.950000] TCP: cubic registered Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.950000] NET: Registered protocol family 17 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.960000] 8021q: 802.1Q VLAN Support v1.8 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Thu Jan 1 02:00:11 1970 kern.info kernel: [ 2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000) Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.740000] usbcore: registered new interface driver usbfs Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.740000] usbcore: registered new interface driver hub Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.750000] usbcore: registered new device driver usb Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.760000] usbcore: registered new interface driver bitmain Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 5.760000] hash ok Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 5.760000] hashtest OK Thu Jan 1 02:00:11 1970 kern.err kernel: [ 5.770000] bitmain-asic: success to register device Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.770000] usbcore: registered new interface driver bitmainbl Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.790000] ehci-platform: EHCI generic platform driver Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.790000] ehci-platform ehci-platform: EHCI Host Controller Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.830000] hub 1-0:1.0: USB hub found Thu Jan 1 02:00:11 1970 kern.info kernel: [ 5.830000] hub 1-0:1.0: 1 port detected Thu Jan 1 02:00:11 1970 kern.info kernel: [ 6.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform Thu Jan 1 02:00:11 1970 kern.info kernel: [ 6.320000] hub 1-1:1.0: USB hub found Thu Jan 1 02:00:11 1970 kern.info kernel: [ 6.320000] hub 1-1:1.0: 2 ports detected Thu Jan 1 02:00:11 1970 kern.info kernel: [ 6.610000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform Thu Jan 1 02:00:11 1970 kern.info kernel: [ 6.740000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0 Thu Jan 1 02:00:11 1970 kern.warn kernel: [ 6.750000] PIC microchip usb OK Thu Jan 1 02:00:11 1970 kern.notice kernel: [ 10.510000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 19 of xref (0 dead, 4 orphan) found. Tue Aug 19 18:32:00 2014 daemon.info sysinit: Tue Aug 19 15:32:00 UTC 2014 Tue Aug 19 18:32:00 2014 user.emerg syslog: kmodloader: loading kernel modules from /etc/modules.d/** Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.050000] hidraw: raw HID events driver (C) Jiri Kosina Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.060000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5 Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.060000] Backport generated by backports.git backports-20130617-4-ge3220f5 Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.080000] nf_conntrack version 0.5.0 (962 buckets, 3848 max) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.100000] usbcore: registered new interface driver usbhid Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.110000] usbhid: USB HID core driver Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.120000] usbcore: registered new interface driver usbserial Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.120000] usbcore: registered new interface driver usbserial_generic Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.130000] usbserial: USB Serial support registered for generic Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.160000] xt_time: kernel timezone is -0000 Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.180000] cfg80211: Calling CRDA to update world regulatory domain Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.180000] cfg80211: World regulatory domain updated: Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.190000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.210000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.210000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.220000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.230000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.240000] ip_tables: (C) 2000-2006 Netfilter Core Team Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ath: EEPROM regdomain: 0x0 Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ath: EEPROM indicates default country code should be used Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ath: doing EEPROM country->regdmn map search Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ath: country maps to regdmn code: 0x3a Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ath: Country alpha2 being used: US Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ath: Regpair used: 0x3a Tue Aug 19 18:32:00 2014 kern.debug kernel: [ 13.390000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.400000] cfg80211: Calling CRDA for country: US Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.410000] cfg80211: Regulatory domain changed to country: US Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.410000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.420000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.430000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.430000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.440000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.450000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Tue Aug 19 18:32:00 2014 kern.info kernel: [ 13.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 Tue Aug 19 18:32:00 2014 user.info syslog: ran 16 iterations Tue Aug 19 18:32:00 2014 daemon.info sysinit: kmod: ran 16 iterations Tue Aug 19 18:32:04 2014 cron.info crond[575]: crond: crond (busybox 1.19.4) started, log level 8 Tue Aug 19 18:32:05 2014 authpriv.info dropbear[586]: Not backgrounding Tue Aug 19 18:32:05 2014 daemon.notice netifd: Interface 'loopback' is now up Tue Aug 19 18:32:05 2014 kern.info kernel: [ 18.470000] device eth0 entered promiscuous mode Tue Aug 19 18:32:05 2014 daemon.notice netifd: Interface 'wan' is now up Tue Aug 19 18:32:06 2014 daemon.notice netifd: lan (632): udhcpc (v1.19.4) started Tue Aug 19 18:32:06 2014 daemon.notice netifd: lan (632): Sending discover... Tue Aug 19 18:32:06 2014 user.notice firewall: Reloading firewall due to ifup of wan (eth1) Tue Aug 19 18:32:08 2014 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Tue Aug 19 18:32:08 2014 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Tue Aug 19 18:32:08 2014 daemon.info sysinit: /etc/config/miner_pic.hex Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: started, version 2.66 cachesize 150 Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: using local addresses only for domain lan Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: reading /tmp/resolv.conf.auto Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: using nameserver 192.168.1.1#53 Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: using local addresses only for domain lan Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: read /etc/hosts - 1 addresses Tue Aug 19 18:32:09 2014 kern.info kernel: [ 21.940000] usb 1-1.1: USB disconnect, device number 3 Tue Aug 19 18:32:09 2014 kern.info kernel: [ 21.960000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected Tue Aug 19 18:32:09 2014 kern.info kernel: [ 22.230000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform Tue Aug 19 18:32:09 2014 kern.info kernel: [ 22.370000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0 Tue Aug 19 18:32:09 2014 kern.warn kernel: [ 22.380000] PIC microchip bootloader usb OK Tue Aug 19 18:32:09 2014 daemon.notice netifd: lan (632): Sending discover... Tue Aug 19 18:32:10 2014 kern.info kernel: [ 23.060000] eth1: link up (100Mbps/Full duplex) Tue Aug 19 18:32:12 2014 daemon.notice netifd: lan (632): Sending discover... Tue Aug 19 18:32:19 2014 kern.warn kernel: [ 31.740000] no int in filled Tue Aug 19 18:32:19 2014 daemon.info sysinit: pic update Tue Aug 19 18:32:19 2014 daemon.info sysinit: open /dev/bitmain0 to restart pic Tue Aug 19 18:32:19 2014 daemon.info sysinit: open /dev/bitmainbl0 ok fd = 0x4 Tue Aug 19 18:32:19 2014 daemon.info sysinit: read data Tue Aug 19 18:32:19 2014 daemon.info sysinit:
Tue Aug 19 18:32:19 2014 daemon.info sysinit: open pic update file fail Tue Aug 19 18:32:19 2014 daemon.info sysinit: Control bootloader to app Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led WAN Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led WANL Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN1 Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN2 Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN3 Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN4 Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led WLAN Tue Aug 19 18:32:20 2014 kern.info kernel: [ 33.230000] usb 1-1.1: USB disconnect, device number 4 Tue Aug 19 18:32:20 2014 kern.info kernel: [ 33.240000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected Tue Aug 19 18:32:20 2014 kern.info kernel: [ 33.690000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform Tue Aug 19 18:32:21 2014 kern.info kernel: [ 33.830000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0 Tue Aug 19 18:32:21 2014 kern.warn kernel: [ 33.840000] PIC microchip usb OK Tue Aug 19 18:32:23 2014 daemon.info sysinit: --bitmain-options 115200:32:8:18:218.75:1106 -o -o stratum+tcp://uk1.ghash.io:3333 -O batido.worker2:123 -o -o stratum+tcp://uk1.ghash.io:3333 -O batido.worker2:123 -o -o stratum+tcp://uk1.ghash.io:3333 -O batido.worker2:123 --api-listen --api-network --bitmain-checkn2diff --bitmain-hwerror --queue 4096 Tue Aug 19 18:32:23 2014 daemon.info sysinit: - init complete - Tue Aug 19 18:33:01 2014 cron.info crond[575]: crond: USER root pid 892 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:33:02 2014 kern.info kernel: [ 75.160000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected Tue Aug 19 18:36:01 2014 cron.info crond[575]: crond: USER root pid 955 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:39:01 2014 cron.info crond[575]: crond: USER root pid 1151 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:42:01 2014 cron.info crond[575]: crond: USER root pid 5286 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:45:01 2014 cron.info crond[575]: crond: USER root pid 6838 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:48:01 2014 cron.info crond[575]: crond: USER root pid 6979 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:51:01 2014 cron.info crond[575]: crond: USER root pid 7083 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:54:01 2014 cron.info crond[575]: crond: USER root pid 7105 cmd /usr/bin/cgminer-monitor Tue Aug 19 18:57:01 2014 cron.info crond[575]: crond: USER root pid 7127 cmd /usr/bin/cgminer-monitor Tue Aug 19 19:00:01 2014 cron.info crond[575]: crond: USER root pid 7149 cmd /usr/bin/cgminer-monitor Tue Aug 19 19:03:01 2014 cron.info crond[575]: crond: USER root pid 7171 cmd /usr/bin/cgminer-monitor Tue Aug 19 19:06:01 2014 cron.info crond[575]: crond: USER root pid 7193 cmd /usr/bin/cgminer-monitor Tue Aug 19 19:09:01 2014 cron.info crond[575]: crond: USER root pid 7215 cmd /usr/bin/cgminer-monitor Tue Aug 19 19:12:01 2014 cron.info crond[575]: crond: USER root pid 7237 cmd /usr/bin/cgminer-monitor kernel log: [ 0.000000] Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #140 Mon Jul 21 17:27:04 CST 2014 [ 0.000000] MyLoader: sysp=1bec2fee, boardp=fdd6ef6f, parts=fc031564 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc:
[ 0.000000] Kernel command line: board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is TP-LINK TL-WR741ND v4 [ 0.100000] MAC FF:FF:FF:FF:FF:FF [ 0.100000] MAC 20:59:a0:c5:4c:68 [ 0.560000] bio: create slab <bio-0> at 0 [ 0.560000] Switching to clocksource MIPS [ 0.570000] NET: Registered protocol family 2 [ 0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes) [ 0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) [ 0.580000] TCP: Hash tables configured (established 512 bind 512) [ 0.590000] TCP: reno registered [ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.610000] NET: Registered protocol family 1 [ 0.610000] PCI: CLS 0 bytes, default 32 [ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.640000] msgmni has been set to 119 [ 0.650000] io scheduler noop registered [ 0.650000] io scheduler deadline registered (default) [ 0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART [ 0.670000] console [ttyATH0] enabled, bootconsole disabled [ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated [ 0.690000] m25p80 spi0.0: found gd25q64, expected m25p80 [ 0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes) [ 0.700000] 5 tp-link partitions found on MTD device spi0.0 [ 0.700000] Creating 5 MTD partitions on "spi0.0": [ 0.710000] 0x000000000000-0x000000020000 : "u-boot" [ 0.710000] 0x000000020000-0x000000117db8 : "kernel" [ 0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.730000] 0x000000117db8-0x0000007f0000 : "rootfs" [ 0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.750000] mtd: partition "rootfs" set to be root filesystem [ 0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000 [ 0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data" [ 0.770000] 0x000000020000-0x0000007f0000 : "firmware" [ 0.770000] 0x0000007f0000-0x000000800000 : "art" [ 0.790000] libphy: ag71xx_mdio: probed [ 0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII [ 1.350000] eth0: Found an AR7240/AR9330 built-in switch [ 2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 2.950000] TCP: cubic registered [ 2.950000] NET: Registered protocol family 17 [ 2.960000] 8021q: 802.1Q VLAN Support v1.8 [ 2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000) [ 5.740000] usbcore: registered new interface driver usbfs [ 5.740000] usbcore: registered new interface driver hub [ 5.750000] usbcore: registered new device driver usb [ 5.760000] usbcore: registered new interface driver bitmain [ 5.760000] hash ok [ 5.760000] hashtest OK [ 5.770000] bitmain-asic: success to register device [ 5.770000] usbcore: registered new interface driver bitmainbl [ 5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.790000] ehci-platform: EHCI generic platform driver [ 5.790000] ehci-platform ehci-platform: EHCI Host Controller [ 5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.830000] hub 1-0:1.0: USB hub found [ 5.830000] hub 1-0:1.0: 1 port detected [ 6.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6.320000] hub 1-1:1.0: USB hub found [ 6.320000] hub 1-1:1.0: 2 ports detected [ 6.610000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform [ 6.740000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0 [ 6.750000] PIC microchip usb OK [ 10.510000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 19 of xref (0 dead, 4 orphan) found. [ 13.050000] hidraw: raw HID events driver (C) Jiri Kosina [ 13.060000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5 [ 13.060000] Backport generated by backports.git backports-20130617-4-ge3220f5 [ 13.080000] nf_conntrack version 0.5.0 (962 buckets, 3848 max) [ 13.100000] usbcore: registered new interface driver usbhid [ 13.110000] usbhid: USB HID core driver [ 13.120000] usbcore: registered new interface driver usbserial [ 13.120000] usbcore: registered new interface driver usbserial_generic [ 13.130000] usbserial: USB Serial support registered for generic [ 13.160000] xt_time: kernel timezone is -0000 [ 13.180000] cfg80211: Calling CRDA to update world regulatory domain [ 13.180000] cfg80211: World regulatory domain updated: [ 13.190000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.210000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.210000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.220000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.230000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.240000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.390000] ath: EEPROM regdomain: 0x0 [ 13.390000] ath: EEPROM indicates default country code should be used [ 13.390000] ath: doing EEPROM country->regdmn map search [ 13.390000] ath: country maps to regdmn code: 0x3a [ 13.390000] ath: Country alpha2 being used: US [ 13.390000] ath: Regpair used: 0x3a [ 13.390000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.400000] cfg80211: Calling CRDA for country: US [ 13.410000] cfg80211: Regulatory domain changed to country: US [ 13.410000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.420000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 13.430000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 13.430000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.440000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.450000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 13.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 18.470000] device eth0 entered promiscuous mode [ 21.940000] usb 1-1.1: USB disconnect, device number 3 [ 21.960000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected [ 22.230000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform [ 22.370000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0 [ 22.380000] PIC microchip bootloader usb OK [ 23.060000] eth1: link up (100Mbps/Full duplex) [ 31.740000] no int in filled [ 33.230000] usb 1-1.1: USB disconnect, device number 4 [ 33.240000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected [ 33.690000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform [ 33.830000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0 [ 33.840000] PIC microchip usb OK [ 75.160000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected Title: Re: Antminer S3 kurulum Post by: hosunn on August 19, 2014, 04:19:38 PM ghash.io tekrar denermisin?
Title: Re: Antminer S3 kurulum Post by: batido on August 19, 2014, 04:25:21 PM @hosunn hala aynı durumda malesef :( internet bağlantısında bir sorun olabilir mi acaba
Title: Re: Antminer S3 kurulum Post by: DeepCoin on August 19, 2014, 04:29:20 PM Miner configuration tabinin goruntusunu paylasirmisiniz
Bu arada cihaza statik ip tanimlamissiniz, bagladiginiz router ile ayni class tami bu ip adresi ? Title: Re: Antminer S3 kurulum Post by: batido on August 19, 2014, 04:41:40 PM evet aynı
http://i.hizliresim.com/Z2RggG.png (http://hizliresim.com/Z2RggG) Title: Re: Antminer S3 kurulum Post by: lorylore on August 19, 2014, 04:44:47 PM adreslerin başına stratum+tcp yazacaksınız
Title: Re: Antminer S3 kurulum Post by: DeepCoin on August 19, 2014, 04:47:28 PM pool adreslerinin basina stratum+tcp:// seklinde yazmaliydiniz.
Title: Re: Antminer S3 kurulum Post by: batido on August 19, 2014, 04:53:33 PM o sekilde düzelttim reboot ettim ancak durum hala aynı değişen birşey yok :(
yerel ağ üzerinde çalışıyor ve 192.168.1.99 ipden girebiliyorum acaba suanda ikiside şirkette sistem odasında kurulu şirketin firewallundan kaynaklı bir sorun olabilirmi onu nasıl anlarız Title: Re: Antminer S3 kurulum Post by: DeepCoin on August 19, 2014, 05:00:46 PM o sekilde düzelttim reboot ettim ancak durum hala aynı değişen birşey yok :( yerel ağ üzerinde çalışıyor ve 192.168.1.99 ipden girebiliyorum acaba suanda ikiside şirkette sistem odasında kurulu şirketin firewallundan kaynaklı bir sorun olabilirmi onu nasıl anlarız bunu anlamanin en guzel sekli bir laptop varsa eger s3 e verdiginiz sekilde elle ip verin ip adresi dns i subnet mask gateway hepsi s3 teki ile ayni olsun ve internete cikmayi deneyin, internete cikabiliyorsaniz eger baglanmayi denediginiz poollardan birine pcnice gcminer yada baska bir sey kurarak cpu ile mine etmeye calisin bakalim pc baglanabilecekmi, eger oda baglaniyorsa sorun yok ama internete cikarken poola baglanamiyorsaniz sirketin firewallindan gerekli portlari kullanacaginiz ipye acmaniz gerek. Title: Re: Antminer S3 kurulum Post by: testerman on August 19, 2014, 05:16:37 PM sirket firewall portlari kapalidir, 3333 olan portu cihazin ipsi icin acildigi takdirde sorun cozulur..
Title: Re: Antminer S3 kurulum Post by: hosunn on August 19, 2014, 07:43:11 PM @hosunn hala aynı durumda malesef :( internet bağlantısında bir sorun olabilir mi acaba Dostum şirketteki Routerdan o IP ye ait Pool portlarını aç ve resetle düzelir. Title: Re: Antminer S3 kurulum Post by: batido on August 20, 2014, 08:07:34 AM Arkadaşlar merhaba hepinize çok teşekkür ederim sıkıntıyı çözdün iplere gerekli çıkış izinlerini vermemişiz :)
Title: Re: Antminer S3 kurulum Post by: ebroker48 on October 20, 2014, 12:42:25 PM MERHABA,
BENDE ANTIMINER S 3 ALDIM IP AYARLARINI KLAVUZDAKI GIBI DEGISTIRDIM.AMA ARAMA MOTIRUNA ARAYUZE GIRIS IP SINI YAZINCA GIREMIYORUM. BIR DE SOYLE BIR DURUMUM VAR BEN INTERNETE SMART TELEFONUMLA BAGLANIYORUM SORUN BURDAN MI KAYNAKLI ACABA.USB ILE BAGLADIM MODEM GIBI KULLANAYIM DIYE BU SEFERDE KABLOLU BAGLANTIYI BILGISAYAR TANIMLAYAMIYOR.BANA BU IKI KONUDA YARDIMCI OLABILECEK BIRILERI VARSA COK MEMNUN OLRU. Title: Re: Antminer S3 kurulum Post by: hosunn on October 20, 2014, 09:38:01 PM MERHABA, BENDE ANTIMINER S 3 ALDIM IP AYARLARINI KLAVUZDAKI GIBI DEGISTIRDIM.AMA ARAMA MOTIRUNA ARAYUZE GIRIS IP SINI YAZINCA GIREMIYORUM. BIR DE SOYLE BIR DURUMUM VAR BEN INTERNETE SMART TELEFONUMLA BAGLANIYORUM SORUN BURDAN MI KAYNAKLI ACABA.USB ILE BAGLADIM MODEM GIBI KULLANAYIM DIYE BU SEFERDE KABLOLU BAGLANTIYI BILGISAYAR TANIMLAYAMIYOR.BANA BU IKI KONUDA YARDIMCI OLABILECEK BIRILERI VARSA COK MEMNUN OLRU. sana önerüm TTnet, Süperonline, Uydunet bunlardan birine abone ol modem ile bağlan zaten her bir ISP nin Bireysel kullanıcılar için uygun kampanyaları mevcut şuanda. Title: Re: Antminer S3 kurulum Post by: ebroker48 on December 24, 2014, 10:39:19 AM Merhaba arkadaşlar burada ileti yazan arkadaşla aynı sorunu yaşıyorum.Modemin içine kullanıcı adı ve sifreyle giremedim IP ye bakmak için ttnetten
kullanıcı adı ve şifre değişmiyormuş halbuki kabul ettmiyor yanlış kullanıcı adı ve şifre diyor.Antiminer ı aldığım şirkette mail gönderdim onlarda IP yi tahmini yaz ve bulmaya çalış dedilerve ban 192.168.2.234-255 aralığındaki tüm IP leri dene dediler ama o da olmuyor malesef ne yapmam gerekiyor. Yardımcı olursanız çok sevinirim. Saygılar Title: Re: Antminer S3 kurulum Post by: gablay12 on December 25, 2014, 12:44:11 PM Modemin markasını yazarsan marka ve modele göre sana kullanıcı adı ve şifre konusunda yardımcı olunabilir.Deneme yanılma yöntemi içinse aşağıdaki ipleri dene.
192.168.1.220-240 |