|
Title: Problem with ANTMINER S3 Post by: coldriver on September 05, 2014, 10:12:23 PM Hi
I have problem with one of my antminers s3. I cant connect with it and leds are flashing like on video (sry for quality) : http://pl.tinypic.com/r/20uakwj/8 Do You have any idea boys? Thx Title: Re: Problem with ANTMINER S3 Post by: philipma1957 on September 07, 2014, 01:27:32 AM you have a link to a casino posted
Title: Re: Problem with ANTMINER S3 Post by: vm1990 on September 07, 2014, 01:54:58 AM you have a link to a casino posted id love to know how you got that i get this https://i.imgur.com/f0NgFe5l.jpg Title: Re: Problem with ANTMINER S3 Post by: coldriver on September 07, 2014, 09:40:35 AM I dont know why it shows U that. I can see video normally. In antminer red led is on once for 1sec.
Title: Re: Problem with ANTMINER S3 Post by: thehairymob on September 07, 2014, 04:36:36 PM It take a couple of minutes for both my S3's to fully boot up. At first I get the red light like you do. Then it takes about 30 seconds till it comes back on. This time though it blinks for it bit before the green lights show that all is fine. I have heard some people say it takes a little longer for their machines to fully boot up and connect to the pool where they mine. :)
Title: Re: Problem with ANTMINER S3 Post by: antminer2014 on September 08, 2014, 02:52:31 PM It is normal for the red to flash for a while, then see nothing(no mine) or green(mining). If it keeps flashing red forever I don't think it is booting up properly. Maybe need to look at miner status
Title: Re: Problem with ANTMINER S3 Post by: coldriver on September 08, 2014, 08:36:51 PM It take a couple of minutes for both my S3's to fully boot up. At first I get the red light like you do. Then it takes about 30 seconds till it comes back on. This time though it blinks for it bit before the green lights show that all is fine. I have heard some people say it takes a little longer for their machines to fully boot up and connect to the pool where they mine. :) It is normal for the red to flash for a while, then see nothing(no mine) or green(mining). If it keeps flashing red forever I don't think it is booting up properly. But in my antminer red led is flashing forever..Maybe need to look at miner status Hi I have problem with one of my antminers s3. I cant connect with it and leds are flashing like on video (sry for quality) : http://pl.tinypic.com/r/20uakwj/8 Do You have any idea boys? Thx |
