Title: [WTB] / Trade: Decent Laptop Post by: Garr255 on April 19, 2012, 06:23:55 AM Hey all,
Recently a friend dropped my laptop, and when I take it apart it looks fine, so I'm assuming its a microscopic crack somewhere in the mobo. Anyway, I'm searching for a new one. I'd like an i5 (possibly i3) and dedicated/upgradable graphics. I don't really have a brand preference, my current laptop is an HP dv6500, and has lasted over six years of being toted around. I'm about to sell an I'd also like to sell or part out that HP. Let me know if you're interested. If you have or know of a good place to get a laptop like this cheaply, I'd appreciate the info. -Garrett Title: Re: [WTB] / Trade: Decent Laptop Post by: Garr255 on April 20, 2012, 03:38:56 AM (reserved) <-- (instead of saying "bump")
Title: Re: [WTB] / Trade: Decent Laptop Post by: Nyaaan on April 21, 2012, 07:06:52 AM (reserved) <-- (instead of saying "bump") You just said bump in your post. You can fix up microscopic cracks with microscope and conductive glue. I hope this helps Title: Re: [WTB] / Trade: Decent Laptop Post by: Shadow383 on April 21, 2012, 01:38:58 PM I've got an Asus G73-W that I'm considering selling, that's probably beyond the price/spec that you're looking for though by the sound of it :P
Title: Re: [WTB] / Trade: Decent Laptop Post by: Garr255 on April 21, 2012, 04:53:54 PM I have a friend with one of those and it is awesome. What's less awesome is how the price of laptops rises linearly with the specs :P So if you ever feel like throwing it on the ground, just tell me when and where and I'll catch it!
You can fix up microscopic cracks with microscope and conductive glue. I hope this helps I'll be looking into that, thanks. I still would like a new laptop though, so I'd be selling the old one if I did fix it. Title: Re: [WTB] / Trade: Decent Laptop Post by: AzN1337c0d3r on April 21, 2012, 10:52:24 PM Actually I'd recommend to take out the motherboard and reflow the solder on it with an oven. Most likely you knocked a joint loose or something.
Title: Re: [WTB] / Trade: Decent Laptop Post by: Garr255 on April 22, 2012, 01:26:59 AM Actually I'd recommend to take out the motherboard and reflow the solder on it with an oven. Most likely you knocked a joint loose or something. I've heard of doing that before, should I try that first or use the microscope tactic? Or maybe a better question is: Is the risk of baking it low enough to try that first?Would it make sense, depending on where the circuit is broken, for it to turn all the power lights on for 5-15 seconds, then turn off without posting or even showing anything on the screen? I appreciate the help. Thanks. |