Title: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: jfarboleda on September 13, 2014, 01:47:34 AM HI FRIENDS!
WHO KNOWS IF LAST ANTMINER S3+(BATCH 9) FIRMWARE IS SAFE (COMPATIBLE) WITH ANTMINER S3 (BATCH 7) ? PLEASE REVIEW THE FOLLOWING (antMiner_S320140826.bin) (support S3+ MD5: 48B2E769E1B57892B71D488711773002) https://www.bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633 THANKS! Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: jfarboleda on September 13, 2014, 02:47:12 AM WELL.... WELL... I HAVE FLASHED LAST S3+ BATCH 9 FIRMWAERE INTO MY S3 BATCH 7...
GUESS... IT WORKS!!! UFFF!!! I CAN BREATH AGAIN... PLEASE SEE THE FOLLOWING IMAGE http://i941.photobucket.com/albums/ad259/JFARBOLEDA/CAPTURARECORTADAANTMINERS3_zpsb153a5c4.png (http://s941.photobucket.com/user/JFARBOLEDA/media/CAPTURARECORTADAANTMINERS3_zpsb153a5c4.png.html) YOU CAN SEE THE MULTIPLE VARIANTS IN FREQ SETTINGS I USE TU USE THE 237.5 AND I CAN SEE THE MINER COLD (40... 41 CELSIUS) AND QUIET... HASH RATE 440... 470... I AM TRYING NOW 243.75 AND I CAN SEE THE MINER A LITTLE HOTTER (42... 43 CELSIUS) QUIET... HASH RATE 460... 480... BUT AN "x" IN A ROW... PLEASE WAIT... TOMORROW I WILL TELL YOU DETAILS... THANKS!!! Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: pekatete on September 13, 2014, 05:26:02 PM Why did you flash the firmware? Did you have any issues before?
Look at this thread, overclocking S3 batch 6 with stock firmware to freq 262.5 https://bitcointalk.org/index.php?topic=750220.0 (https://bitcointalk.org/index.php?topic=750220.0) If it ain't broke, don't fix it! Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: rpandassociates on September 27, 2014, 07:45:33 PM I just updated my firmware as well. to the s3+ firmware
I dont see any issues Got a slight increase in GH/s No x's I have both a s3 and s3+ my s3 runs 44C my s3 runs 42c And my s3 performs more average GH than my s3+ My s3 was the last batch before the s3+ Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: d2dtk on October 04, 2014, 06:00:52 AM Any updates on how using the s3+ benefitted on your machine?
Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: kaykawa on October 04, 2014, 11:33:05 AM 237.5 mhz is the best frec for a S3, mine are runing cold (39 - 40) : hashrate 450 - 460
Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: professor21 on July 14, 2015, 06:03:53 AM won't overclocking damage and destroy the miner?
Title: Re: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES Post by: notlist3d on July 14, 2015, 07:46:19 AM won't overclocking damage and destroy the miner? If done properly no. You slowly go up and base it on your mining area heat. You do not want ton's of heat from OC gear. But if you do it wrong and just OC the crap out of it yes you can destroy chips, which hurts miner. |