Title: A2 Innosillicon Terminator 100MHs - LTC/BTC Miner Mint Condition Post by: mrwarehouse on September 28, 2014, 10:01:38 PM I am selling my practically new A2 Terminator. It runs at close to 100MH/s and is cool to the touch. Perfectly maintained and air conditioned since purchase and willing to sell to a good home.
PRICE REDUCED, ONLY $1,499 USD BTC ADDRESS: 159YhnZRTkYNmPkcvoGCd5n7JYpheJMHT9 FREE GLOBAL SHIPPING! http://i58.tinypic.com/1fcu50.jpg A2 Chip Specs • Developed on 28nm using very low power design techniques and best efficiency. • Custom IC package with power bars for low voltage, high current feeding. • Configurable in daisy chain mode for distributed work with up to 253 ASICs. • Standard SPI interface with CS pin needed to enclose all useful SDI and SDO data. • 27 highly optimized hashing engines based on custom ASIC cells up to 1.6M. • Built-in redundancy architecture to allow for bad engines to be bypassed without affecting mining operation. • Flexibility to configure the PLL clock and computation performance. • Hashing power of 1.6M in nominal and 1.8M in Turbo mode. • Power usage of 10W in typical nominal and 12W in typical Turbo mode. • Supply voltage of 0.78V in low power, 0.84 V in Turbo mode for ICs. • No need for special cooling, just regular top and bottom heat sinks plus fan cooling. The A2Terminator Specs • A Total of 6 boards with 8 chip in it, Total 48 Chips in a miner • Normal Hash rate 1.8Mhs*48 chips = 88.8Mhs • Turbo Mode Hash rate 2.08Mhs*48 Chips = 100Mhs • Power = 630Watts normal , 750 Watts Turbo • Size = 51cm—42cm—16cm • Temperature = Runs cooler than the A1 miners Title: Re: A2 Innosillicon Terminator 100MHs - LTC/BTC Miner Mint Condition Post by: User705 on September 29, 2014, 06:17:39 AM Escrow? Where are you shipping from?
|