|
Title: HELP my computer recognize my rockminer like a block erupter usb miner! Post by: danielfebres on September 30, 2014, 06:05:55 AM HELP my computer recognize my rockminer like a block erupter usb miner! WHY?
Icarus detected (2:2) failed to initialise (incorrect device?) Its a rockminer R-BOX Title: Re: HELP my computer recognize my rockminer like a block erupter usb miner! Post by: vm1990 on October 01, 2014, 11:23:39 AM its a mix between the USB ART hardware its normal. what mining software you using?
Title: Re: HELP my computer recognize my rockminer like a block erupter usb miner! Post by: cyberpinoy on October 02, 2014, 07:11:59 AM if you are using BFGminer then you have CGminer drivers installed
if you are using CGminer then you have BFGminer drivers installed. if you are using CGminer make sure to run Zadig and change the drivers to the winusb drivers. If you are using BFGminer then reinstall the CP210VCP drivers. if this is your first time using the miner, and you just got it and installed it, the BFGminer should recognize it as it runs on specific comm ports (for Sha-256 miners) if it is not new and worked before then you must have changed the drivers. if you are trying to run BFGminer and CGminer at the same time (for sha-256 miners) I can tell you it may not work, I cant get it to work unless I am running CGminer on script (which asks for CommPorts) and then use BFGminer for my sha miners. I do not like this because my SHA miners do not get as good of hashrates as they did in CGminer asnd the hardware errors arrrrrrrrr :( |