Bitcoin Forum

Bitcoin => Mining support => Topic started by: Valalvax on June 14, 2012, 01:59:08 AM



Title: BAMT going into powersave mode/screen saver?
Post by: Valalvax on June 14, 2012, 01:59:08 AM
I recently added a rig using BAMT, but after 10 or 20 minutes of happy mining, the system goes into a powersave mode, which... is bad for mining

With windows it was easy enough to disable, but not sure how to do it in linux, why isn't it disabled by default on BAMT? *shrug*


Title: Re: BAMT going into powersave mode/screen saver?
Post by: Valalvax on June 14, 2012, 03:23:02 AM
Also, just noticed, the card slowly starts to lose it's MH as it mines... I though it was temp, so I increased the fan speed, but... no fix

03:15:52    163.16  163.16
03:15:53    163.16  163.16
03:15:53    163.16  163.16
03:16:04    160.07  160.07
03:16:15    160.17  160.17
03:16:25    157.67  157.67
03:16:36    156.38  156.38
03:16:47    156.12  156.12
03:16:57    154.58  154.58
03:17:08    152.82  152.82
03:17:18    151.12  151.12
03:17:29    150.40  150.40
03:17:39    150.86  150.86
03:17:50    150.68  150.68

03:20:00    146.13  146.13
03:20:12    146.22  146.22
03:20:22    145.83  145.83
03:20:33    146.05  146.05
03:20:43    145.91  145.91
03:20:54    145.34  145.34
03:21:04    145.26  145.26
03:21:15    145.38  145.38
03:21:26    144.55  144.55
03:21:31    144.14  144.14
03:21:42    143.62  143.62
03:21:52    144.00  144.00
03:22:03    144.07  144.07
03:22:14    143.86  143.86

Starts at 250 MH/s, this is... umm.. maybe 10 minutes in


Title: Re: BAMT going into powersave mode/screen saver?
Post by: Valalvax on June 14, 2012, 04:11:21 PM
Fixed both problems, not real sure what I did, but I'll take it all the same :P

I'm assuming increasing the fan speed fixed the slowly trailing off hashrate, and... magic fixed the powersave thing