Title: Radeon 5850s Power Issue when using Molex 4pin (standard) to PCI-e 6pin adapter Post by: shat on May 18, 2011, 05:08:46 AM I've been testing some Radeon units and I noticed that when/if I have to use the Molex 4pin (standard molex power) connector adapter to 6PIN PCI-e connector.. the cards fan spins up and seems to run, but it never actually functions. I test all the cards in windows, just to see if they appear and I've noticed they don't show up.
Now, the PSU can handle it, tested on 1150W and a 650W, same scenario on 8 cards using 4 sets of those adapter cables that ship with retail packaging. With 1 5850 its pulling about 248W @ 2.02A @ 122.3V @ 60Hz Ideas? Title: Re: Radeon 5850s Power Issue when using Molex 4pin (standard) to PCI-e 6pin adapter Post by: shat on May 18, 2011, 05:10:39 AM 248W @ 2.02A @ 122.3V @ 60Hz is the power going INTO the psu... not to the video card :)
122.3V would kill it haha Title: Re: Radeon 5850s Power Issue when using Molex 4pin (standard) to PCI-e 6pin adapter Post by: SgtSpike on May 18, 2011, 05:14:19 AM The only thing I can think of is that the adapter is defective... I run several cards on adapters no problem.
Title: Re: Radeon 5850s Power Issue when using Molex 4pin (standard) to PCI-e 6pin adapter Post by: Steffer on May 18, 2011, 10:36:28 AM I was wondering .. My 5850 has 1x 6 pin and 1x 8 pin. Is it enough with 2x 6 pins?
I'm out of pcie 6/8 pins from my power supply and may be getting another 5850 so I just want to know if I could use the molex to 6 pins adaptors :-) |