|
Title: Need Antminer S3 help Post by: lonelymailbox2 on November 29, 2014, 01:35:40 AM hello. I am sorta of new to bitcoin and asic miners in general. I have had experience in setting up my antminer s1 that currently is mining perfectly but for some reason the s3 does not respond the same way. I changed the ip of the miner so it wasnt the same as the first and plugged in the same pool, worker, password, gateway, dns, you name it. After all the was done it started working for 30min and then it would never connect. I tried everything from factory resets, unplugging cables, changing ips and networks but none of it was working. Now im just sitting here confused with and antminer that turns on and the blades spin but no lights are flashing that tell me if its not connected or is connected to a pool. please help thanks
Title: Re: Need Antminer S3 help Post by: gablay12 on December 09, 2014, 07:36:06 PM So you have created a new worker or not?
If you have 2 workers with the same name you will face such a problem. Title: Re: Need Antminer S3 help Post by: Antuam on December 14, 2014, 04:54:23 PM Hello.
I have the similar problem on Friday. I reinstall the firmware of October, because,with the firmware of november no work good my S3. https://bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633 (https://bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633) Regards. Antuam |