|
Title: Bitmain Antminer S4 has Arrived. Post by: conspiracyjo2kX on December 03, 2014, 09:50:55 PM All,
My Bitmain Antminer S4 arrived yesterday, and I am very anxious to open the box and get it set up. I already have 3 USB dualminers running on my PC, currently mining altcoins. It took me forever and a day to figure out what I need to do in order to get it working properly. CGMINER - unsuccessful in setting it up CPUMINER - minor success in setting up, it would receive work from the pool, but the pool wouldn't display the work it was doing. BFGMINER - better success than CPUMINER, I was able to connect but It wouldn't register all the miners connected to my PC. MULTIMINER - SUCCESS! I sure am thankful for these GUI Miners. Once I went to the http://www.ftdichip.com/Drivers/D2XX.htm (http://www.ftdichip.com/Drivers/D2XX.htm) website and re-installed the drivers this way rather than just connecting the USBs and having them load the drivers themselves. It worked, all 3 Miners are successfully mining scrypt altcoins. Going thru Multiminer I was able to locate the command it used with BFGMINER, I wasn't selecting my COM ports with dualminer@COM7 If anyone has any pointers in setting up an AntMiner S4 please share a few tips, so that this will be rather quick set up. In the end I don't mind figuring it our for myself. Just seeing if someone is willing to share some knowledge. Title: Re: Bitmain Antminer S4 has Arrived. Post by: notlist3d on December 03, 2014, 09:59:50 PM There is a manual on Bitmain's website. Also they are very easy to set, if you know pool information. Set it and almost forget it so easy.
Title: Re: Bitmain Antminer S4 has Arrived. Post by: BeginToMine on December 07, 2014, 09:48:34 AM Yes, they are very easy to set up.
Title: Re: Bitmain Antminer S4 has Arrived. Post by: ChuckBuck on December 08, 2014, 05:42:07 PM Antminers S4 setup is just like the Antminer S1, S2, S3 setup.
After connected to power on the network, there's usually there's a default IP set to get to the web interface on a browser (192.168.1.99), and then you just enter your pool info. Here's what the page looks like where you'd enter into it : https://i.imgur.com/qwCbfz4.png Click Save, and you should start seeing your miner shares growing, and you're off and mining. Good luck. |
