|
Title: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: fullzero on December 15, 2014, 05:31:29 PM kit Includes: 6x v2.2 H-cards (4 with additional heatsinks, 2 without additional heatsinks) M-board Backplane Raspberry Pi with SD card 1x white led Corsair 140mm fan 2x Antminer Jumpers network cable Miner IP will be set to: 192.168.1.100 Note: If you don't keep the blades stable miner will only hash around 160GH/s. Miner needs to be stable (no vibrations) to hash at maximum speed. Placing the miner on its side with the fan on top is the best way to do this (see pictures). It also takes a little time for the miner to reach max hash rate. You will need a 300w single rail or better PSU with 2x pcie powercables for all 6 h-cards. http://s15.postimg.org/bk2tohlzv/IMG_0093.jpg http://s15.postimg.org/sut8gidnf/thefury6blade.jpg http://s15.postimg.org/uszwei657/IMG_0091.jpg http://s15.postimg.org/62a80oqsb/IMG_0092.jpg http://s15.postimg.org/lwp4akfiz/IMG_0095.jpg Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: codibn on December 15, 2014, 05:55:55 PM 0.2 with shipping to uk
Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: fullzero on December 15, 2014, 06:00:17 PM Unfortunately shipping to the UK will cost too much.
Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: Just Magicmann on December 15, 2014, 07:02:43 PM If you can hold until December 26th, I can guarantee you a sale. That's the day I get my next pay check.
Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: fullzero on December 15, 2014, 08:24:10 PM Trying to sell this before the holidays; I'll give it 2 days; if no one buys it before then I'll hold for you.
Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: Just Magicmann on December 15, 2014, 08:34:34 PM Trying to sell this before the holidays; I'll give it 2 days; if no one buys it before then I'll hold for you. That's reasonable. I appreciate it. Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: fullzero on December 17, 2014, 09:56:02 PM It has been 2 days; I will hold for you Just Magic.
Title: Re: [WTS] Bitfury Miner 180GH/s Kit Post by: Just Magicmann on December 18, 2014, 02:38:49 PM It has been 2 days; I will hold for you Just Magic. Sounds great, thanks! Like I said, I get paid on the 26th, so I'll get you paid either the 26th, or the 27th. Title: Re: [WTS] Bitfury Miner 180GH/s Kit pending sale Post by: Just Magicmann on December 29, 2014, 11:50:02 PM Payment has been sent.
https://blockchain.info/tx/89dc879f9ef0638582480504240e65eb2f892ab17e2b0f106258572df046339a Title: Re: [WTS] Bitfury Miner 180GH/s Kit pending sale Post by: fullzero on December 31, 2014, 03:06:40 AM shipped today via USPS
estimated delivery is Friday tell me if you have any problems with the miner. Title: Re: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: Just Magicmann on January 07, 2015, 04:59:53 AM The good news is that the hardware arrived in beautiful condition thanks to the absolutely amazing packing job on fullzero's part. The bad news, is that I'm having issues being able to hash.
It look me a while to be able to access the web interface, and only randomly started to work a few minutes ago. It is setup with pool information and the hashrate shown has been zero for about five minutes now. I've tried stopping and starting it as the web interface suggest. After about sixty seconds of it sitting and not mining, the fan will slow down and the LEDs on it dim. I haven't been able to figure out the issue, and it's been difficult for me to find documentation regarding my issue. Title: Re: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: fullzero on January 07, 2015, 01:44:12 PM What pool are you using?
After entering the pool info did you click the save and restart stratum proxy button? Are the blades inserted into the first six slots with no spaces? Are all the blades fully inserted? Is the Pi fully attached in the correct orientation? Have you attached 2 pcie connectors? Did you accidentally include the port number in the pool address field? Title: Re: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: Just Magicmann on January 07, 2015, 09:07:34 PM What pool are you using? After entering the pool info did you click the save and restart stratum proxy button? Are the blades inserted into the first six slots with no spaces? Are all the blades fully inserted? Is the Pi fully attached in the correct orientation? Have you attached 2 pcie connectors? Did you accidentally include the port number in the pool address field? Multipool.us Yes. Even stopped and restarted the miner. Blades are in first six slots closest to the RaspPi. Blades are fully inserted. Pi is attached and oriented correctly. PCI-e ports are powered. +12V and ground also connected. Pool port not included in address. Title: Re: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: fullzero on January 07, 2015, 11:02:11 PM I never connected the +12V and ground in addition to the 2x pcie connectors. I think I remember reading you are only supposed to use one or the other (but I'm not sure about this). I used only 2x pcie connectors and the miner worked.
I never used multipool with a bitfury kit. I do remember members posting their kits had issues with some pools. I have used the following pools and know they should work with this miner: Slush BTCGuild Eligius Title: Re: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: Just Magicmann on January 08, 2015, 04:34:15 AM Well, without having the +12V and ground rails powered and only the PCI-e ports, it's working well. I thought I read that both are supposed to be powered, but obviously this is working, so I'm happy either way.
Title: Re: [WTS] Bitfury Miner 180GH/s Kit SOLD Post by: fullzero on January 08, 2015, 01:32:55 PM Glad its working :)
|
