Bitcoin Forum

i just got a gridseed 5.2MH blade and i got the cgminer that i need for it but anyways it says new block detected and pool difficulty changed but no accepted or anything like that ive been tryin to find whats wrong everywhere i cant find anything

What are your batch file settings?

cgminer.exe --scrypt -o stratum+tcp://hot.wemineltc.com:3333 -u derpderp.1 -p x --gridseed-options=baud=115200,freq=888,chips=40 --hotplug 5

freq is too high for the blades, the stock clock is 800, I run mine at 838 and some at 825. The small pucks work great at 888, but for the blade they'll produce a ton of hardware errors.

That shouldn't stop it from submitting shares, just create a lot of HW errors. The rest looks good to me.

Weminltc has a dedicated server for gridseed, stratum+tcp://gridseed.wemineltc.com:3333    

Also make sure your starting difficulty on Wemineltc isn't too high, something like 256 or lower for starting difficulty.

If none of that helps I'd trouble shoot the power, with just usb plugged in and no power they won't hash but they'll still get recognized by cgminer. Make sure the fans working and there is enough power.

I can't think of anything else, good luck.

Could also be your usb driver, I had to change mine back when I ran those, i don't remember what it was called but the info is out there. Also ensure that you can see that cgminer recognizes your blades, sometimes I would have to start cgminer the. Plug each blade in 1 at a time. This hopefully will fix it.

i set it to 800 and i also changed out the power supply and its working great now

you can set freq at 750, personally i'm not losing much but i gain in power consumption