|
Title: BITMAIN S3 Controller Board Post by: dishamain on January 06, 2015, 06:56:21 AM Hellow Every One
i has problems with Bitmain Antminer S3 Controller Board. the Controller board which was damaged due to power serge i bought new controller Board from BITMAIN TECH China They Sent me A new controller Board which i installed in the the miner but i found that controller Board was not compatible with S3 Miner beause the controller Board which was damaged was of S3 and They sent me S3+ Controller Board as the new controller board which was not working for some reason i sent them back and they sent me the other controller board. again the problem was the same but this time i was able to login in to the controller board that they have sent me not the contoroller board is not hashing it shows the following image below http://i60.tinypic.com/2ql5xzt.jpg now what should i do. i called and emailed they they donot reply properly if any one can help me secondly i m installing same controller board with S3+ miner the board is working fine so need help it will be highly appreciated Thanks Title: Re: BITMAIN S3 Controller Board Post by: MyRig on January 08, 2015, 07:12:00 AM If you can log into the web control panel but it doens't mine, or able to use anothr control PCB and the miner will start hashing, there is a chance the Control Pcb's firmware may need updated.
Please try downloading this and update your firmware (downgrade) to this version. (Please select options NOT to keep the previous setting) https://bitmaintech.com/files/download/antMiner_S320140721.bin If the above doesn't work, please return the S3 control PCB and we will send you a replacement. Hellow Every One i has problems with Bitmain Antminer S3 Controller Board. the Controller board which was damaged due to power serge i bought new controller Board from BITMAIN TECH China They Sent me A new controller Board which i installed in the the miner but i found that controller Board was not compatible with S3 Miner beause the controller Board which was damaged was of S3 and They sent me S3+ Controller Board as the new controller board which was not working for some reason i sent them back and they sent me the other controller board. again the problem was the same but this time i was able to login in to the controller board that they have sent me not the contoroller board is not hashing it shows the following image below http://i60.tinypic.com/2ql5xzt.jpg now what should i do. i called and emailed they they donot reply properly if any one can help me secondly i m installing same controller board with S3+ miner the board is working fine so need help it will be highly appreciated Thanks Title: Re: BITMAIN S3 Controller Board Post by: mazedk on January 08, 2015, 08:52:22 AM I have an S3 with the same issue. Been in contact with bitmain and after confirming its a faulty board (swapping board from a working unit). I am waiting to hear back from BM.
Title: Re: BITMAIN S3 Controller Board Post by: dogie on January 08, 2015, 06:46:46 PM In the future you can get S3 support here (https://bitcointalk.org/index.php?topic=671189.0) or here (https://bitcointalk.org/index.php?topic=702653.0). There is no need for a new thread for every issue.
Title: Re: BITMAIN S3 Controller Board Post by: sieve66 on April 25, 2015, 03:20:01 PM If you can log into the web control panel but it doens't mine, or able to use anothr control PCB and the miner will start hashing, there is a chance the Control Pcb's firmware may need updated. Please try downloading this and update your firmware (downgrade) to this version. (Please select options NOT to keep the previous setting) https://bitmaintech.com/files/download/antMiner_S320140721.bin If the above doesn't work, please return the S3 control PCB and we will send you a replacement. Hellow Every One i has problems with Bitmain Antminer S3 Controller Board. the Controller board which was damaged due to power serge i bought new controller Board from BITMAIN TECH China They Sent me A new controller Board which i installed in the the miner but i found that controller Board was not compatible with S3 Miner beause the controller Board which was damaged was of S3 and They sent me S3+ Controller Board as the new controller board which was not working for some reason i sent them back and they sent me the other controller board. again the problem was the same but this time i was able to login in to the controller board that they have sent me not the contoroller board is not hashing it shows the following image below http://i60.tinypic.com/2ql5xzt.jpg now what should i do. i called and emailed they they donot reply properly if any one can help me secondly i m installing same controller board with S3+ miner the board is working fine so need help it will be highly appreciated Thanks Hello, i have also a s3+ faulty board, could you please tell me how/where can I get a new one Thanks in advance Title: Re: BITMAIN S3 Controller Board Post by: dimke_yu on April 25, 2015, 04:04:05 PM You can send your damaged s3+ control board to Bitmain warranty and they will repair it and send it back to you. It is cheaper then to buy new control board if they had any...
Title: Re: BITMAIN S3 Controller Board Post by: sieve66 on April 25, 2015, 04:22:59 PM You can send your damaged s3+ control board to Bitmain warranty and they will repair it and send it back to you. It is cheaper then to buy new control board if they had any... thanks for the reply, but my antminer is no longer on warranty Title: Re: BITMAIN S3 Controller Board Post by: MyRig on April 25, 2015, 06:44:56 PM @sieve66,
what country are you located? (You don't have to answer in public but you can email us support@bitmain.zendesk.com) S3 or S3+ control PCB is BRIKED, then it can be serviced in USA, EU or Ukraine at the moment at minimum fee. ($15 USD for North America & 15 Euro for EU/Ukraine area) If it is burnt, then no, it can not be serviced. |
