Title: Broken A2 Post by: Jwtech on January 24, 2015, 04:55:14 AM Hey. I am having problems with my A2 terminator. Only one of the 6 modules are turning on and I cannot figure out the reason why.
I have replaced the power supply thinking it was the initial problem, was not it. Tried about every configuration possible but not luck. Anyone be able to help ? I think it is something to do with the data cable. Any help would be much appreciated. Cheers Title: Re: Broken A2 Post by: notlist3d on January 26, 2015, 07:03:06 AM Hey. I am having problems with my A2 terminator. Only one of the 6 modules are turning on and I cannot figure out the reason why. I have replaced the power supply thinking it was the initial problem, was not it. Tried about every configuration possible but not luck. Anyone be able to help ? I think it is something to do with the data cable. Any help would be much appreciated. Cheers That is a lot of modules to lose. Have you tried switching working module cables to others and see what happens? What about trying another SD card with firmware on it to make sure not a software issue? Title: Re: Broken A2 Post by: quakefiend420 on January 27, 2015, 10:40:14 AM If you're unable to fix it and decide to think about selling it, let me know.
Title: Re: Broken A2 Post by: AJRGale on January 30, 2015, 01:32:40 AM id say check the PSU, see if thats pushing the right voltage to the units, unplug all the units and go one by one (i don't own one of these, but thats what i would of tried)
|