Bitcoin Forum

yo

Pool (X11) is up:

https://ucoinx11.suprnova.cc

Please add to OP !

is x11 or x15?
The title say x15 but spec say Algorithm: X11(PoW&PoS)

It is X11 and it is a new chain, it was X15 before on the old chain

X11

Added

Web wallet and mobile wallets is available again.

da fuck was  busy watching video https://www.youtube.com/watch?v=1Zlcar-X5yk
 :(

You really did not miss much since they were zero reward block to start.

1 (Premine: 1657545 coins for UCoinX15 holders and bounties)
2-149 (0 coins)
150-3600 (blocknumber*0.01)
3601-7499 (36 for even blocks, 24 for odd)
7500-64999 (18 for even blocks, 12 for odd)
65000-84999 (12 for even blocks, 8 for odd)
85000-11499 (24 for even blocks, 16 for odd)

Would the community/Devs be interested in setting up a Social Media Action Campaign at Promoplugs.com (http://Promoplugs.com)?
It lets you declare actions on twitter and facebook (like tweet, retweet, follow, like), tracks the actions and the user who completed it, and then allows the dev to payout either for every action or raffle style (each action is a submission into the raffle)
For an example see: XCL's current campaign: http://promoplugs.com/Campaign.aspx?CID=93 (http://promoplugs.com/Campaign.aspx?CID=93)


It should get a good buzz going around the relaunch, and can be used to get on exchanges by unifying the communities voice in petitioning.

Since I'm a supporter of UCoin, I'd gladly my service for free! =)

Will be made autoexchange. C-CEX will do it during the day.

Hi, any!
Exchanger (http://wallet.ucoin.name/index.php?page=exchanger) is done.
Also, to exchange coins, you should register in web wallet.

karimdr2 (https://bitcointalk.org/index.php?action=profile;u=181358) build UCoin QtWallet for Mac (http://ucoin.name/downloads/ucoinx11-mac.zip)

I sleep.
Good luck!

How to swap old coins ?

To go with X11 was smart decision. I decided to buy more. It is interesting to me how easy everything goes here with this dev. Coin already support features that only few coins have but without too much talk. In the other hand dev needs to have proper marketing team because without that all of this will pass by the people who don't want to investigate more. When some other coin was about to get all of those features there was hounded of pages here on this forum where people talked about that. With this coin that was not the case. Sometimes it is not enough to be good programmer, or to have best product on the market, promotions and a good team is what's needed around this dev.  

Hi, any!

News:

• Block reward in USnake increased from 0.5U to 2.5U.
• Exchanger updated(added unit displays UCoinX15 block number).

---

If your coins are on C-CEX, they will be exchanged automatically. If not, then you should use our exchanger (http://wallet.ucoin.name/index.php?page=exchanger)(to exchange coins, you should register in web wallet).


Thanks for you support. Unfortunately, I am not good in marketing and I don't have much free time, but I hope for the community, and if anyone has ideas for advertising, I will be glad to listen and implement.

Total pow is 3.5m include premine

And premine is 1.6m

Wow... Surprise.

This UCoin relaunch(old version based on X15-algo).
Premine will be used that would UCoinX15-holders could exchange coin to UCoinX11.

Ok good. Could tell me purpose of UCoin?

in OP's explain is so simple.

Purpose of UCoin is to create a simple and convenient for ordinary users cryptocurrency. Therefore, it is planned to create convenient services/wallets.

Why double the total supply? And is the swap from old to new 1:1?

And has C-Cex already done the swap or can I still send coins there?

Increase volume of PoS(PoS interest has also been increased). Volume of PoW reduced almost in half. I think that in this case the exchange of 1:1 is honest.
I'm waiting forward from C-CEX, he promised to upgrade the daemon and exchange coins today.

Great, thanks. And thanks for standing by your project! It's becoming rare to find dedicated developers these days.

Thats vary nice. Tell us how to swap our coins from the wallets, please ?

As I already said, you should use our exchanger (http://wallet.ucoin.name/index.php?page=exchanger)(to exchange coins, you should register in web wallet).

Sorry I've missed it obviously.

You haven't missed anything, use the link you were given and enjoy your new and improved UCoins

http://wallet.ucoin.name/index.php?page=exchanger

I mean I've missed before. Now I've got it.  Thank you :)

Sorry, my mistake. :)

@ocminer: could you please fix the Suprnova UCoin X15 (old one) pool? It seems to be on a wrong fork again (differs from official UWallet's chain), I suppose it needs to be re-synched (hopefully the last time :) )...
According to the Dev, the old x15 UCoin still could be mined for a week now, in parallel to the new x11 one!

I am already on it :)

Good. I'm in

I checked your web wallet. It is so nice and cool.

But I can't find WP wallet.(for x11 algo). Could you provide it?

Just now, I play Usnake using android.

It is simple game. and some difficult, maybe Beta version.

I hope change Usnake's icon(android ver)

But I can't play Usanke(I can't install Usanke ipa)

Unfortunately, to set USnake need to jailbreak the device.
Isn't it like icon on Android?

What is your version of the WP?

Daemon on BiteXP block explorer (http://bitexp.net/explorer.php?coin=UCoin) upgraded by Zornado (https://bitcointalk.org/index.php?action=profile;u=34394)

Errors in web wallet and UWallets fixed.

Sorry It is my mistake

I found it
https://i.imgur.com/j4wSDQM.jpg

Very smooth and easy.

What is your next plan Dev?

Would be nice to change the word "Currient" to "Current" in the next version of the wallet  :P

Thx.

I want to use same wallet address. What should i do?

I can't do that?

Same account in web and mobile wallet is good.

But if I use same address in web and mobile then awesome.

I have updated my Block Explorer (http://bitexp.net/explorer.php?coin=UCoin) with Richlist (http://bitexp.net/richlist.php?coin=UCoin) and Charts (http://bitexp.net/charts.php?coin=UCoin) for UCoin. I start the update of the Explorer manually, so sometimes the Explorer is not up-to-date.

I didn't notice the error, fix soon.

Thx

In the case of mobile wallet, you can use e-mail to send coins or wallet address, which is in Overview->Address.

Strangely enough, I have a normal icon, now I will understand.

While it's a secret, but releases will soon be.

Daemon on SSDPool block explorer (http://ucoin.explorer.ssdpool.com:9124) upgraded.

Ok, I understand.. But It is some different what i want.

Hmm ... the same address = all the devices sync their data.

for example, If I send a little coin on the web wallet then I can confirm on my Mac wallet.

like real world bank account.

Is new wallet released?  ???

Dev,how to exchage my old local Ucoin for the new ? ???
My old wallet can't sync now.

I sent Ucoins from suprnova to http://wallet.ucoin.name/index.php?page=exchanger,
but I haven't received them.  :(

Add nodes and resync blockchain.

NODES:
node1.ucoin.name
node2.ucoin.name
node3.ucoin.name
addnode=ucoin.suprnova.cc

suprnova should resync blockchain.

So,I will lose my coins ?

I've been mining on SuprNova pool from the start and I've been getting my payouts. I just requested a manual payout and it shown up in my wallet after 30 seconds once I clicked the cash out button.

There are two suprnova pools and they are on the old and new blockchains.  You just have to be aware of what you are doing and it depends on which suprnova pool you are sending from.

The web wallet is on the UCoinX11 block chain

so if you send from ucoin.suprnova.cc to the web wallet right now you are NOT going to receive your coins.  You need to use the exchanger.

if you send from ucoinx11.suprnova.cc to the web wallet you WILL receive your coins.

It's pretty simple but it is also easy to make a mistake.

No, coins not should lose.

Nobody has sold any U for almost 2 days.  The buys keep growing.  Mining is going smooth.  Diff is still pretty low.  Maybe we CAN have nice things!?!

I really doubt it... What you wrote above on two Suprnova pools (x11 and x15) and possibility to mix things up, is completely true. But I am not sure you will get your coins even if you send them now from Suprnova X15 pool to correct x15 wallet address or to UCoin Web wallet's exchanger. I already wrote that multiple times here, but the issue does not seem to be resolved - Suprnova x15 pool is most probably on a wrong fork! It shows wrong current block and wrong difficulty... And I am almost sure if you send coins from Suprnova x15 pool, they WILL be lost. I have some coins there myself, and I am still waiting for Suprnova to be synched, to send my coins to exchanger...

If ocminer checks this thread, it would be nice to get some info from him.. Otherwise, I would strongly advise not to make transfers from Suprnova x15 until the issue is fixed! If anyone was able to successfully transfer coins from Suprnova x15 in last few days, please speak up!
------------
With x11 things go really smooth indeed. I hope those x15 chain dis-synchronisation issues will be disappear together with switching to new blockchain!

----
EDIT: corrected the post above. In some places there was x11 written instead of x15..

I have updated to the latest x15 wallet and also resynched the chain, waiting for feedback from the dev if the chain is ok now

ya i see what you mean.  I tried to send my remaining X15 balance from suprnova to the exchanger and although it appeared to create a transaction:

https://i.imgur.com/gILD3Jx.png

The coins did not arrive at the exchanger.

I also notice that on the exchanger page "UCoinX15 current block:" has been on 148000 for many hours.

You are lightning fast again! :). Please let us know when you confirm with te Dev the Suprnova is ok! I'll check that too, and will finally be able to get my shiny UCoins :)

@Jookly: exactly. Hope your coins not lost... Not so big amount, but with current price every UCoin counts! :)

Actually we're on block 147508 on ucoin x15

My Windows UCoint QT wallet is on block 148231 now..., so there is something wrong somewhere...

{
"blocks" : 148231,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : {
"proof-of-work" : 0.47961095,
"proof-of-stake" : 0.00024414,
"search-interval" : 1
},
"blockvalue" : 800000000,
"netmhashps" : 44.78072528,
"netstakeweight" : 1249.79881915,
"errors" : "",
"pooledtx" : 0,
"stakeweight" : {
"minimum" : 0,
"maximum" : 0,
"combined" : 0
},
"stakeinterest" : 4000000,
"testnet" : false
}

hmm interesting.. how many connections do you have ? I have 15

Why I can't receive the coins sent from old wallet to UCoinX15 address at http://wallet.ucoin.name/index.php?page=exchanger ??

I have 7 :). You have more, so what...? You win?  ;D

Here are my getpeerinfo:


23:45:43

[
{
"addr" : "178.33.126.221:49697",
"services" : "00000001",
"lastsend" : 1422906326,
"lastrecv" : 1422905749,
"conntime" : 1422903206,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 147499,
"banscore" : 0
},
{
"addr" : "104.236.239.165:49697",
"services" : "00000001",
"lastsend" : 1422906326,
"lastrecv" : 1422906326,
"conntime" : 1422903225,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 148000,
"banscore" : 0
},
{
"addr" : "192.95.29.153:49697",
"services" : "00000001",
"lastsend" : 1422906326,
"lastrecv" : 1422906326,
"conntime" : 1422903291,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 148206,
"banscore" : 0
},
{
"addr" : "96.22.137.23:49697",
"services" : "00000001",
"lastsend" : 1422906325,
"lastrecv" : 1422906326,
"conntime" : 1422903315,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 148208,
"banscore" : 0
},
{
"addr" : "88.213.221.77:49697",
"services" : "00000001",
"lastsend" : 1422906326,
"lastrecv" : 1422905749,
"conntime" : 1422905119,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 80038,
"banscore" : 0
},
{
"addr" : "185.39.0.20:49697",
"services" : "00000001",
"lastsend" : 1422906326,
"lastrecv" : 1422906289,
"conntime" : 1422905477,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 5140,
"banscore" : 0
},
{
"addr" : "114.222.50.58:49697",
"services" : "00000001",
"lastsend" : 1422906326,
"lastrecv" : 1422906228,
"conntime" : 1422905912,
"version" : 60013,
"subver" : "/Satoshi:2.0.0/",
"inbound" : false,
"startingheight" : 148283,
"banscore" : 0
}
]

@goodtodeclare I did the same mistake not looking that there is new wallet based on X15, so about 5080 ucoins send to Uwallet never arrived. What I m doing now is re synching with latest X15 wallet maybe they will be back but there are small chances for that to happen.

Not really but if everyone has more on connections on one chain than on the other, This chain is considered the right one

I want to be on the right chain! :) But how..?

I have published my connections above. Do you have the same ones, or different?

I deleted all the old block files and resynced with old x15 ucoin wallet ,still,I never received my coins at exchanger. any ideas ?

I would like to point out again that the "UCoinX15 current block:" listed on the exchanger page is incorrect and hasn't changed all day.  Maybe the problem will end up being on the exchanger end of things.

Re synced with new x15 wallet and my coins get back. Now I m exchanging them.

Cool ya my coins that I sent from suprnova showed up on the exchanger now and all is good.

I also notice that the exchanger reports a different block now than it has the rest of the day.

Hooooraaaayyyyy :)

I think, Dev should better make a tutorial about Usnake. Still I don't know how do get Ucoin using Usnake.

First let's swap the old coins.  ;)

Why it takes so long to send Ucoins from local wallet to exchanger ? ???

UCoinX15 balance:

Server error! Please contact the support.

 :( :(

New version of UCoinX15 doesn't move on the block 148000 and more.
We will do a rollback.

I resync blockchain, wait 10-15 minutes.

Once you collect 16 coins, appear coin with word «B» (it block). Taking it, you will get a reward.

The exchanger has crashed .  :(

I resync blockchain. Wait.

My best record is only 9  ;D

lucky to swap minutes ago  ;D

Does that mean we need to update the old wallet ?

Does your coin need a multipool?

Getting a multipool for your coin will create buy pressure on exchanges.
And it will allow people with mining power to get more coins for their hashrate.

If you are interested, then take a look here: https://bitcointalk.org/index.php?topic=932225.0

Have a nice day!

Multipool is not a bad option,it will increase the net hashrate and secure the network.

Yes

Dev,I find that after relaunch you get much more % coin  than before.
It's unfair. :(

UCoinX11 AikaPool is available:
http://aikapool.com/ucoinx11

UCoinX15 had 50K premine for bounties(and ≈418K was sold at ICO => ≈4.6BTC of which I have received ≈2.1BTC). UCoinX15 premine for bounties will not be exchanged to UCoinX11.
UCoinX11 had 250K premine for bounties and other costs (payment servers, etc.)

I got an reward yesterday for discovering minor security hole on web server so all goes well regarding that part.

hello. Looking to buy UCOINs. Thanks.

Nice!  There are some for sale over at the exchange https://c-cex.com/?p=u-btc

Folks, I am really sorry to write about this again, but old x15 block chain doesn't seem to work again... After reading several posts about successful transfer from Suprnova to exchanger, I finally went ahead and transferred the remainder of my UCoin Suprnova balance to exchanger address. Guess what?... Almost 24 hours passed.. no coins arrived. And now there is a deadline for exchanging in 24 hours..? Why? How could one exchange the coins, if they are lost in the way to exchanger..? It was not a small amount btw..

sorry to hear that drays.  I hope that it works out for you.  Don't give up yet.

Its sorted! ocminer is the man! Not sure what he did exactly, but my coins arrived (I suppose he resynched the blockchain and re-send the coins again in a separate transaction). So now Suprnova is in sync with exchanger and x15 wallets!

I am becoming ocminer's fan :)

On a separate topic: the web wallet design is very nice and clean. Looks and works great. Sometimes just I see few Chinese or Japanese (or maybe Korean??) symbols here and there :), which leads me to a conclusion our dev is from one of those countries :)

You can make a screenshot displaying symbols? Also, I'm not from East Asia :).


Will stop the automatic exchange. However, I can make it manually.

Windows wallet is crashed and wont open back up for me

getting this

https://i.imgur.com/QFMaDBH.png

1) Check time and date on you computer.
2) Delete folder UCoin(backup wallet.dat if required) in C:\Users\username\AppData\Roaming (most likely there were files from UCoinX15).

P.S.: This is UCoinX11 or UCoinX15 wallet?

Ucoin X15 -  Net speed 59.85 MH/s  :)

It was the UCoinX11.  Deleting everything except wallet.dat fixed it.  thx

Web wallet not work!

http://wallet.ucoin.name/

Error 404
The requested file or directory was not found!

working over here.  Maybe a DNS issue?

  Error in the OP! 85000-11499(24 for even blocks, 16 for odd)

And where errors?

I think he means you were missing a zero in the OP

>>85000-11499(24 for even blocks, 16 for odd)

should be

85000-114990 (24 for even blocks, 16 for odd)

Who is working correctly wallet?
I do not know who download this one.

Wallet works fine.

https://www.virustotal.com/en/file/64f5ef24378b978d8ac86e92535d45b40d6868708625bc73350c3f20e4cc03f1/analysis/1423074652/

I checked it more carefully on different browsers (I am using many browsers on different devices.. :) ). The Chinese/Japanese symbols are displayed only on the Android 2.3 Samsung device on its native browser and Dolphin browser on the same device... All other browsers are showing either correct symbols, or no symbols at all. This was happening on the icons which you use on the web-wallet: "glyphicon" icons are displayed normally on all devices except that Android 2.3 device; "fa" icons (that is "Font Awesome" I guess), are displayed correctly on most browsers, but on some browsers (on Android 4.x) show just empty space (no icon).

In any case, this is not really serious issue. The Web Wallet is very nice as I said already, the only place which could be improved, is the "Help"->"Terms of Service". The text there is not really English.. :). I can help to correct that if you want (just improve the wording), but English is not my native language too, so I can correct only to the best of my knowledge :)

Let me know if you need any further English help too.  It is my primary.

http://www.faucetrotator.uni.me/ucoin U as in Unlimited faucet added :) Enjoy!

so dev now that swap is complete can you share some of the plans you have for UCoin?

Thanks.


Wait 18 hours :)
P.S.: In advance, I will not talk about plans.

Hmm.. Not talk about plans?

WTB some coins in private, no ccex. Let me know if ur interested

tom petty was right.  the waiting IS the hardest part.

I'm definitely curious to know what dev has cooking.

edit:  *taps watch*  is this thing working?

ooooo snazzy

I'll be glad if your correct the error where something is written not correctly. English isn't my native language.

Honestly I have been able to understand almost everything you write but here I cleaned up your terms of service for your uwallet, everything pretty much already looked good except the top two lines

UWallet Terms of Service.

By using UWallet, you are agreeing to these terms. If you do not agree with the terms and conditions in this Agreement you may not use the UWallet.

The UWallet developers may modify this Agreement and any policies affecting the Site at any point of time. Such modification is effective immediately upon posting to the website and will be distribution via email, forum post and a link in chat. Your continued use of the UWallet following any modification to this Agreement shall be deemed an acceptance of all modifications.

The UWallet and it's developers are not responsible for any loss of coins which are stored in the UWallet.

The wallet looks really professional.

The price is dirt cheap.
Nobody likes ICO and premine.  :(

Cheap price is problem?

I can't understand...

Good!

Looks much better. Just please re-check the bolded part. Not clear what is meant. Probably should be either "or distribution" or "and distribution", or "and will be distributed", depending on what is the supposed meaning. "or distribution" is probably the most appropriate option, what do you think?

good call.  That should be "and will be distributed"

Thanks, fixed.
P.S.: If you want get reward, please PM me.

nah i mean it was like 10 minutes of work so don't sweat it.  I'm just happy to help

One thing I notice is that there are only a couple hundred thousand UCoins for sale at any given time.  I think it is harder to get a fat stack of UCoin than people realize.

This is rather confusing.

Is this coin an X15 coin or an X11 coin.

I along with others have been mining this coin on a pool for a number of weeks now: AN X15 Pool.

What is C-CEX.com on, an X15 Ucoin or an X11 Ucoin.

I have lost thousands of coins today because of this confusing baloney, and I am not happy as a result. We were loading X15 U coins into C-CEX for months with no issues, and now coins are going into oblivion. Pretty pissed right now.

That would be frustrating to lose coins of course but how did you manage to ignore the two weeks of announcements leading up to the swap being complete?  It was announced on January 25th in the X15 thread and completed on Feb 4th.  It was a well managed swap compared to others I have been involved in. 

There are pools today CoinKing.io in particular that are still mining as an X15 coin with active users. I am one of them. If this has switched to X11 this is a dead blockchain now. Truckloads of work wasted.

I have only heard about the pool in passing but it sounds to me that the coinking pool operator is who you should be upset at because it sounds like their miners count on them to keep track of this stuff for them and they dropped the ball by not keeping track.  Suprnova on the other hand was aware of the swap and very helpful to users that were having problems.

Not trying to belittle your situation.  I do have sympathy for it.  I just don't know if there is anything you can do at this point and from my perspective the UCoin dev did a good job with the swap. Sorry  :(

the faucet pays now x100 :) still unlimited!

My wallet has only 3 onlie active connections.

I'm not sure if you can do something with the coins already sent to c-cex address, but you could contact c-cex and ask them to give you the private key of your c-cex ucoin x15 wallet, so you can restore it on local wallet and get the coins. Most probably they will find a reason for not doing that (c-cex support is not the most friendly one), but it is worth to try, as this is viable option. I asked this once (for anothr coin), and they were very close to doing that (they didn't do it as situation was resolved other way that time).

For the coins still remaining in the coinking.io wallet, you can contact ucoin developer - he said he will do manual coin exchange for some time for users like you who missed the window to swap coins.

Wish a good luck to you.

I had been mining these coins all week, now they are useless.... And all my x15 coins are stuck on the coinking.io server wallet, I am unable to enter an address to get them into a local wallet.... I'm scared now to even mine x11 being that I can't put any wallet addresses on my pool... Am i missing something or is there a fix to this?

I checked the coinking.io site, and I have to tell, they are really bad at following the coins they mine! There are many coins listed with active pools which have PoW finished long time ago! Just for example - KingdomCoin (PoW finished months ago), Magnetz (long forgotten scam coin), SterlingCoin (PoW finished about month ago, Noocoin (not sure if it ever had PoW, but now its pure PoS for long time already), there are definitely many others too. The site owners don't follow coin threads, don't update pools, so you have to be very careful working with such pool! The pool itself has great GUI and development team, but its very badly managed (I mined there for short time, so I know what I speak about - even their miltipool switching algorithms are wrong, and profit statistics is inflated).

Now about the problem itself - you have to resolve it with coinking.io support, as they created this mess. They just blindly moved the UCoin from x15 pool list to x11 pool list, thats why you cannot set the x15 address. You have to make them add the UcoinX15 wallet back (have two wallets, like Suprnova pool owner did), so you can withdraw your coins.

EDIT: BTW, if you still have your coins displayed in their wallet, maybe you can just enter UcoinX11 address and transfer coins without problems, as if they were mined on x11? I would try that...

Why some people still mining X15 Ucoin?

https://i.imgur.com/sIvEMoB.png

Hi Dev, You did good job.

But Web wallet trading is unsatisfactory.

When i login to web wallet. Every time, I input trading API.

Why doesn't server remember it? If server has private API then more usefull.

Hi,

---

This coin X11(we relaunch coin). Coins on C-CEX and web wallet were exchanged automatically.
If you will send me to pm your wallet.dat, I can exchange coins and send them to you UCoinX11 address.


We do not save API KEY on server for user privacy.


Coins are mined after 146K block will not exchanged.

---

Good luck.

The price seems better than before.

New UCoin (x11) is not transfer anywhere
Transfer on the stock exchange, wallet and webwallet is not transfer

Nope, Wallet is working well. Do you show us your snap shot?

http://i60.fastpic.ru/big/2015/0209/38/545029ccc492caeb5520e5876dc48438.png (http://fastpic.ru/)
http://i63.fastpic.ru/big/2015/0209/27/ce1347538c680baebef8a65426379227.png (http://fastpic.ru/)
http://i67.fastpic.ru/big/2015/0209/57/9998b4db59d3058e9e26fdc7d1a00457.png (http://fastpic.ru/)

The snapshot doesn't show transaction ID. Check the transaction ID's with block explorer: http://ucoin.explorer.ssdpool.com:9124.
If you don't find them, then you would need to contact ocminer (Suprnova operator), for him to check his logs.

But as far as I can see, now there are no fork issues, Suprnova, all wallets and explorers are on the same page. This new x11 block chain seems to work much better than the old x15 one.

EDIT: however Aikapool seems to work now on a different fork!! @AikaPool: Please fix this!

https://i.imgur.com/kscmNGE.png

My wallet sync speed is very slow.

3 days ago, I have only 500 blocks remain. Now I have 4000 blocks remain.

What can i do? Can i add some node?

The previous wallet has the same sync issue,slow and often get stuck.

I just checked my wallet, it sync fine and very fast so I suggest you to download chain again.

thx, I fixed problem.

Why there are such deviations in a wallet?

0 active connection to network!!!
Dev, please make working nodes!

AikaPool have 2656 error blocks! The pool of Ucoin will be closed!

It is still working well over here.  Sorry to see you leave Aika.

Low volume but price is steadily rising. 

POS is working correctly.

It's a good time to get some UCoin.

good coin, the time to buy.
more marketing and everything will be fine.

Hi, any!
I apologize for delay.

I restart daemons on servers.
Two nodes are available(n1.ucoin.name and n2.ucoin.name).

About fork:
Please resync blockchain on wallets. If the fork again, we made hardfork.
Good luck.

Okie Dokie I re-downloaded blockchain

Update UWallet for Windows to version 1.1.

As far as I can see, you added Transactions list and About. Those are welcome additions, but could I suggest few small, but important things to add to the wallet to make it more user-friendly and useable? Those are:
1. Ability to minimize the window to the tray. Wallet is something to be run in background, user don't need it to take much space when minimized, so it would be better to have it in the tray area as a small icon.
2. Ability to copy the address is missing! I can see the UCoin address, but there is no way to copy it to paste somewhere! The only way to copy it, is to go to the Web Uwallet :)

There may be other usability suggestions, but these are for the beginning :)

The coin Dev will tell better, but I am sure the update is not mandatory. It is the same wallet, just with two new buttons added at the bottom.

Thanks for ideas. Will be implemented :)

Good! Dev


But I have some trouble, Uwallet(Windows ver) need libgcc_s_dw2-1.dll. And My computer doesn't have it.

What can I do?

Fixed.
I add libgcc_s_dw2-1.dll(and several dll) to archive with UWallet for Windows (http://www.ucoin.name/downloads/uwallet-windows-1.1.zip).

thx

Today, I buy more ucoin.

Devs maybe change some % POS small people staking

Uwallet is awesome. very nice. Good job Dev

Thanks

I'm hanging out in irc #ucoin

Seems a very nice coin!

will looking forward of this coin and may mine some later.

Thanks for you support.

Hi, any.
IRC added to OP.

Update UWallet for Windows to version 1.1.1.

nice, we needed an update  :)

Some altcoin has dicegame and it is bring benefit to dev.

and investor use their ucoin for fun.

How about make dicegame?

dead? the net hashrate is quite low. :(
The price and trading volumn on c-cex are both low as well.

Dev just updated two days ago.  So no, coin is not dead.

Hi,


No, coin isn't dead.
I am working on new features.
Also, I am working on a service that will be to accept UCoins.


Good idea. Also, I can make dicegame for Android.
I'll do it, but after I implement the features I'm working on now.

Good luck.

how are right mining Ucoin ??
Coinking (http://coinking.io/?r=31670) use 1 Workers 3.46mh/s  net 0.01gh/s
suprnova  use 3 workers 7Mh/s  net 72.9mh/s
http://aikapool.com/ 1 worker 32mh/s net 73 mh/s

mining in one worker are profit?

 How do I use the new wallet? I start it up and it asks for a email and password.

Thanks for your dedication UCoinTeam. Out of the last few projects I invested in this is one of the only ones I don't regret. Keep up the good work!  

There is someone who always wants to be first in line to buy UCoins. 

Answer t your question is not easy, and is not obvoius..
If you run miner for a long time, it should be the same whether you run it in a pool with big hashrate, or small one. Thats what theory says, and it should be the same for any coin, not only ucoin.
I cannot be 100% sure, but as far as I understand, in practice it depends on how big hashrate your miner has compared to the whole hashrate of the coin. If your hashrate is big enough, you could want to mine at pool with lower number of miners and lowe hashrate. If you hashrate is small, better to mine at the pool with the most hashrate, so you can resolve some blicks together with other (bigger) miners. Again, that is just my assumptions, I may be wrong in them...

Yes, this is pretty confusing. The same for usnake - it asks for user/password, but it is unclear where do you get them from.

I suppose the right way is to sign up first in web wallet, then to log in using those credentials both to uwallet ant to usnake. At least this is what I did, and it worked :)

There is also someone mining ucoins with big hashrate from either private pool or solo. Network hashrate is about twice higher than suprnova+aikapool hashrate, and is much higher than is dictated by current price... Looks like some miner expecs ucoin to pump again :)

I did sign up for the web wallet and I tried to use that info to login but it does not work for me. I tried two different email address/password and it did not work either time.

I just did this all once again to test it (with my another email address), and it worked beautifully. Steps are:
1. Go to Web uWallet, press "Sign up", enter any email address belonging to you, and any password (not the password of the email account!)
2. Login to the email client, find the confirmation mail, press confirmation link, then log in when redirected to webwallet.
3. Download the Windows uWallet (I use Windows PC), enter the email address and password. Do not press enter (it woesnt work, BTW, so this is a bug ;D), then click on "Sign In" button.
4. It gives a message box saying something like "successfully authorozed" and voila, you get the same address as in webWallet.

Maybe you missed the point 2?

Hi,

Thank you, it's very motivating. When I started, and a lot of people to write "scam ICO", "scam coin" desire to do anything is disappear.


I mine in solo :)


After couple days I will make update and adding possibility of authorization by clicking on enter and add "Sign up" button to wallets.

Good luck.

Somebody joined the #ucoin channel for a few seconds over the weekend.  They didn't message anything but they brought a ray of sunshine into the lonely world of ucoin.  Helllooooooooo out there.... out there... out there... out there...

I've been mining this from the start. Only 233 blocks to go until it's 100% POS.

Edit: My bad; It goes to block 114990  so still a couple weeks to go.

Are you sure?  I think POW ends @ 114990

edit:  Ya it didn't end when TimC said it would.  Not sure why he thought it would end there since he didn't respond but its no big deal.  I have a friend in IRC today :)  Come hang out I will tell you a story.

I guess got mixed up with some coins that I'm mining.

An easy mistake to make!

There are less than 15k blocks left though so it is definitely a good time to get some.

I have noticed the Net hash has increase over the last few days. One of the few launches this year that has working code from the start and the Dev team is still active.

http://ucoin.explorer.ssdpool.com:9124/ isn't work.

There were 3 of us in the #ucoin channel at one point today.  That's a 300% increase from last week!  :D  Join up!

Update UWallet for Windows to version 1.1.2.
Added "Sign up" button.

200% increase actually :) to be more accurate :)

This button is very useful, but "Sign in" and "Sign up" buttons look very similiar (and its easy to confuse them), however they carry completely different functions. As someone who designed UI before, I would suggest to have a link instead of a button, saying "Don't have an account? Sign up now" or "No account? Sign up" (if you want it to be shorter). That would be more intuitive and correct.

Not the ideal time for the suprnova pool to stop working (coming up on the final few thousand PoW blocks). Anyone know what's happening there?

Pool restarted.

Thanks for the speedy resonse ocminer.  :)

This time I would prefer ocminer to be slower to react...  :)

I just hired few expensive rigs to mine on Aikapool, as Suprnova was down and the diff was low, then boom Suprnova is up and diff skyrocketed... wasted hash/money.. :(

Is there any other promising x11 coin now, to redirect the rigs..?

BTW, Nicehash does not work with Aikapool - cannot connect to the Ucoin port by some reason. Not sure if Aikapool owner will be fast to react too :), but he would have better look into this, as he loses miners because of that.

Just to be clear on this. I mean instead of this:

http://i60.tinypic.com/4i2et4.jpg

put this:

http://i59.tinypic.com/24m8cgz.jpg

Sorry for my Painbrush skills :) Just wanted to illustrate the idea..

Good idea, corrected in the next update. One and a half or two weeks planning several updates/releases.

Need nodes

19:14:39

getpeerinfo


19:14:39

[
{
"addr" : "192.95.29.153:24552",
"services" : "00000001",
"lastsend" : 1426468461,
"lastrecv" : 1426468461,
"conntime" : 1426142381,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 89628,
"banscore" : 0
},
{
"addr" : "37.59.18.108:24552",
"services" : "00000001",
"lastsend" : 1426468459,
"lastrecv" : 1426468460,
"conntime" : 1426142382,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 104135,
"banscore" : 0
},
{
"addr" : "104.236.239.165:24552",
"services" : "00000001",
"lastsend" : 1426468460,
"lastrecv" : 1426468460,
"conntime" : 1426142388,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 104135,
"banscore" : 0
},
{
"addr" : "128.199.47.231:24552",
"services" : "00000001",
"lastsend" : 1426468460,
"lastrecv" : 1426468460,
"conntime" : 1426142400,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 104135,
"banscore" : 0
},
{
"addr" : "46.165.209.140:24552",
"services" : "00000001",
"lastsend" : 1426468460,
"lastrecv" : 1426468460,
"conntime" : 1426142401,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 104135,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:6ab8:346c:19af:b47d:5ccc]:55387",
"services" : "00000001",
"lastsend" : 1426468460,
"lastrecv" : 1426468460,
"conntime" : 1426450982,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : true,
"startingheight" : 113487,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:6abd:24f6:2d85:8671:35a8]:14139",
"services" : "00000001",
"lastsend" : 1426468460,
"lastrecv" : 1426468460,
"conntime" : 1426467556,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : true,
"startingheight" : 113983,
"banscore" : 0
}
]

On the wrong track http://aikapool.com/ucoinx11!
No payments!

I've already written AikaPool, waiting for an answer.

where is the pool ocminer? ...

#crysx

hi all ...

read the op and still a little confused ...

does PoW stop? ... if so - when? ...

tanx ...

#crysx

After 115K block

ok tanx ...

so only 2000 blocks left - or thereabouts ...

i actually thought there would be more than that ...

#crysx

I think it's finished. Both my wallet and suprnova are showing current block being > 115k (looks like the bitexp explorer got stuck on the 14th).

*Edit: just checked Aikapool (block 113,951). I've never seen a coin fork as much as this one. Hopefully now that it's PoS only the network will be more reliable.

BE broken

thats a pity - i would have really like to have mined this one ...

looks interesting ...

#crysx

Last PoW block is 114,999, we are now at the block 115,084. PoW is succefully completed, and now UCoin becomes pure PoS coin!

Aikapool indeed managed to switch to a wrong fork just before the end of the PoW. BTW, though UCoin X15 had many forks, with Ucoin X11 this is the first ever fork happened, hopefully the last one, as I am not sure is forks could ever happen during PoS!

POW ends?

yes

Hi,
Update UWallet for Android.
Added "Sign up" button.


P.S.: In next update I replace Sign up as proposed by drays (https://bitcointalk.org/index.php?topic=941386.msg10770491#msg10770491)

Good luck.

lookin' good.  Now we just need some advertising.

And more people in the irc channel (#ucoin)!  8)

Hmmm......
Why it happens?

I wrote to you in PM.
Please resync blockchain, to those who are mine before fork could withdraw coins.
Last time I checked AikaPool block number in Friday, block number was correct.

On Sunday numbers of blocks went one after another, after several orphans.

Looking forward to hearing more about this, sounds promising.