|
Title: Bfgminer configuration fpr Antminer U3 Post by: Piu3344 on February 10, 2015, 09:11:10 AM Hi all,
I'm trying to compile a bfgminer build for my Antminer U3. But unfortunately the build is unable to detect the device. I used the current ver. 5.0 from the bfgminer homepage. Did anyone figured out a working configuration ? Or is there no way around cgminer ;) I'm on Bananian 15.01 ... which is a Debian fork for the Banana-Pi Title: Re: Bfgminer configuration fpr Antminer U3 Post by: michelem on February 10, 2015, 07:52:29 PM I don't think Antminer (any) is supported by BFGminer https://github.com/luke-jr/bfgminer/issues/580
Title: Re: Bfgminer configuration fpr Antminer U3 Post by: olliedog12000 on February 12, 2015, 10:11:52 PM Hi Ive just managed to get my rockbox 100ghs running on bfgminer and I had to check the device by going to terminal and typing,
lsusb this showed the device was being seen then run bfgminer hit M then + and type "all" then it found the rockminer so hopefully it will find yours as well. once you have found it hit s then w to write config and it should remember these settings. hope it helps as I have just spent 2 days learning how to install things on the rpi having never had one before. |