|
Title: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: buttmunch on March 16, 2015, 11:15:46 PM Hello,
I recently ordered a Bitmain Antminer S2 off of ebay for $420.00. Unfortunately, the unit was severely damaged during shipment (Thanx, USPS!). While I found replacement controller Board & ASIC Blades, I need an IO Board for the Beaglebone that plugs into the center slot of the controller board PCI strip. There is a deep gouge on the IO board but the Beaglebone appears to be OK. I also have found some replacement capacitors for some of the damaged ASIC blades that had the original caps torn off by the USPS during transit. I do need that IO board though. Please help. Thanx in Advance. Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: notlist3d on March 16, 2015, 11:37:43 PM Not sure with name if you are real or trolling. If real you might put in a Bitmain support ticket and see if they sell that piece. I am not sure if they sell S2 parts still but that is your best bet.
I know with a S3 I had a bad part and bought a new part from them. (this was a little while back though) Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: Rabinovitch on March 17, 2015, 01:32:53 AM I saw that board on e-bay recently.
Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: buttmunch on March 17, 2015, 02:13:34 AM I bid on that exact item but a couple of hours later, I was outbid :-(
I don't think I'm gonna get it. I guess I'll have to resort to unsoldering the bad PCI socket and soldering in a new one........ Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: Meech on March 17, 2015, 03:23:58 AM Yes one of mine was damaged, boards everywhere. Seems Bitmain used several different hold down structure designs for the pcb boards, some not so good. Your best bet is to wait and get it on ebay, otherwise post in the "Computer Hardware" section under "Goods" and someone may have one for you. It doesn't hurt to ask Bitmain but they seem to be hesitant in stocking spare parts for older models.
Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: MyRig on March 17, 2015, 04:15:28 AM For now, the best option would be buy in the 2nd hand market... We do not sell S2 parts.
Capacitor on the other hand, you can buy them on Ebay, too but if you really can't buy it, we may have them in stock from USA side as I have seen the reels sitting on the shelving somewhere. Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: 1l1l11ll1l on March 18, 2015, 12:48:41 AM I would consider parting with one if the price were right.
Title: Re: NEEDED: Bitmain Antminer S2 IO Controller Board Post by: bpbamberger on September 10, 2015, 05:50:30 AM Are you still looking to sell? I am looking for a new base board as well
I would consider parting with one if the price were right. |