Bitcoin Forum

Bitcoin => Mining support => Topic started by: antminer33 on February 13, 2016, 02:51:48 PM



Title: Overheated S4 Antminer, what to do?
Post by: antminer33 on February 13, 2016, 02:51:48 PM
I baught 10 S4 miners and overheated 1 of them. It basically shut down and I dont know how to restart it.

I thought it might have been a fuse but I cant find the problem. Is it goosed?

Thanx


Title: Re: Overheated S4 Antminer, what to do?
Post by: xqus on February 13, 2016, 02:55:08 PM
Is it totally dead? Or is it some kind of life in it?
Are you sure the powersupply is OK?


Title: Re: Overheated S4 Antminer, what to do?
Post by: antminer33 on February 13, 2016, 03:25:38 PM
Is it totally dead? Or is it some kind of life in it?
Are you sure the powersupply is OK?

I dont get any lights, nothing! I thought when they hit 80 they shut down for safety not completely!

What happened, when I set the room up the door closed and before I noticed they room over heated and that miner shut down.

Thanx


Title: Re: Overheated S4 Antminer, what to do?
Post by: xqus on February 13, 2016, 04:07:44 PM
First make sure the powersupply is ok.
If it's totally dead, no fans or nothing i would suspect the psu. There might be a thermal protection inside the PSU.

Are you able to measure the PSU in any way? Disconnect everything, and connect a fan to it?

I don't have any special knowledge about the S4, but i suspect it's pretty much the same as S6.



Title: Re: Overheated S4 Antminer, what to do?
Post by: philipma1957 on February 14, 2016, 12:13:22 AM
90% chance you hosed the psu .

I think you said you had more s4's

I have no idea if you skills at tearing down gear.

If you are up to the task of pulling 1 psu from a working s4 to put in the dead s4 if the dead s4 work you are certain you need a psu.


Title: Re: Overheated S4 Antminer, what to do?
Post by: antminer33 on February 19, 2016, 02:38:44 PM
Thanx I will give it a go!


Title: Re: Overheated S4 Antminer, what to do?
Post by: notlist3d on February 19, 2016, 04:17:13 PM
Also OP before running again if your getting this hot to cause damage.... work on cooling.  I would not run again if you know it is hot to the point it will damage miner's. 

I think you need to do this for the 9 others.  As if problem is still there you chances will have it happen again.   But I hope it was just PSU.   Might open it up and see if visible damage due to heat on anything.