Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: Claymore on April 11, 2016, 03:30:36 PM



Title: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v8.0 (Windows/Linux)
Post by: Claymore on April 11, 2016, 03:30:36 PM
Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner.
=========================

Latest version v8.0:

- added new coin for dual mode: PASCAL(PASC). Now you can mine Ethereum, Ethereum+Decred, Ethereum+Siacoin, Ethereum+Lbry or Ethereum+Pascal. NOTE: Currently Pascal is not available for NVidia cards.
- added "-nofee" option.
- added ability to use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt.
- added "License.txt" file.
- some minor improvements.


LINKS:

GOOGLE: https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU (https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU)
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w (https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w)


NVIDIA DRIVERS:
9xx cards in Windows 7 x64: just use latest/recent drivers from Nvidia website (for example, 368.81). Note that latest 372.54 is slower than 368.81.
9xx cards in Windows 10 x64: you have to use old drivers (for example, 352.xx) and miner built for cuda6.5.
10xx cards in Windows 7 x64: just use latest 372.54 drivers from Nvidia website.
10xx cards in Windows 10 x64: just use latest 372.54 drivers from Nvidia website, note that you must have Win10 Anniversary update.

FEATURES:

- Supports new "dual mining" mode: mining both Ethereum and Decred/Siacoin/Lbry/Pascal at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code.
- Supports both AMD and nVidia cards, even mixed.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum and Siacoin solo mining.
- Supports both HTTP and Stratum for Decred.
- Supports both HTTP and Stratum for Siacoin. Note: not all Stratum versions are supported currently for Siacoin.
- Supports Stratum for Lbry and Pascal.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.



This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal.
NOTE: Currently Pascal is not supported for NVidia cards.

For AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup.
For nVidia cards, 368.81 driver is recommended for best performance and compatibility.

For AMD cards, set the following environment variables, especially if you have 2GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

This miner is free-to-use, however, current developer fee is 1% for Ethereum-only mining mode (-mode 1) and 2% for dual mining mode (-mode 0), every hour the miner mines for 36 or 72 seconds for developer.
Decred/Siacoin/Lbry/Pascal is mined without developer fee.
If you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate.

This version is for recent AMD videocards only: 7xxx, 2xx and 3xx, 2GB or more. Recent nVidia videocards are supported as well.

There are builds for Windows x64 and for Linux x64 (tested on Ubuntu 12.04). No 32-bit support.



COMMAND LINE OPTIONS:

-epool    Ethereum pool address. Only Stratum protocol is supported for pools. Miner supports all pools that are compatible with Dwarfpool proxy and accept Ethereum wallet address directly.
   For solo mining, specify "http://" before address, note that this mode is not intended for proxy or HTTP pools, also "-allpools 1" will be set automatically in this mode.
   Note: The miner supports all Stratum versions for Ethereum, HTTP mode is necessary for solo mining only.
   Using any proxies will reduce effective hashrate by at least 1%, so connect miner to Stratum pools directly. Using HTTP pools will reduce effective hashrate by at least 5%.

-ewal    Your Ethereum wallet address. Also worker name and other options if pool supports it.
   Pools that require "Login.Worker" instead of wallet address are not supported directly currently, but you can use "-allpools 1" option to mine there.

-epsw    Password for Ethereum pool, use "x" as password.

-eworker Worker name, it is required for some pools.

-esm   Ethereum Stratum mode. 0 - eth-proxy mode (for example, dwarpool.com), 1 - qtminer mode (for example, ethpool.org),
   2 - miner-proxy mode (for example, coinotron.com), 3 - nicehash mode. 0 is default.

-etha   Ethereum algorithm mode for AMD cards. 0 - optimized for fast cards, 1 - optimized for slow cards, 2 - for gpu-pro Linux drivers. -1 - autodetect (default, automatically selects between 0 and 1).
   You can also set this option for every card individually, for example "-etha 0,1,0".

-ethi   Ethereum intensity. Default value is 8, you can decrease this value if you don't want Windows to freeze or if you have problems with stability. The most low GPU load is "-ethi 0".
   Also "-ethi" now can set intensity for every card individually, for example "-ethi 1,8,6".
   You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" parameter which is used in official miner.

-eres   this setting is related to Ethereum mining stability. Every next Ethereum epoch requires a bit more GPU memory, miner can crash during reallocating GPU buffer for new DAG.
   To avoid it, miner reserves a bit larger GPU buffer at startup, so it can process several epochs without buffer reallocation.
   This setting defines how many epochs miner must foresee when it reserves GPU buffer, i.e. how many epochs will be processed without buffer reallocation. Default value is 2.

-allpools Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining.
   Note that if devfee mining pools will stop, entire mining will be stopped too.

-allcoins Specify "-allcoins 1" to be able to mine Ethereum forks, in this mode miner will use some default pools for devfee Ethereum mining.
   Note that if devfee mining pools will stop, entire mining will be stopped too.
   Miner has to use two DAGs in this mode - one for Ethereum and one for Ethereum fork, it can cause crashes because DAGs have different sizes.
   Therefore for this mode it is recommended to specify current Ethereum epoch (or a bit larger value),
   for example, "-allcoins 47" means that miner will expect DAG size for epoch #47 and will allocate appropriate GPU buffer at starting, instead of reallocating bigger GPU buffer (may crash) when it starts devfee mining.
   Another option is to specify "-allcoins -1", in this mode miner will start devfee round immediately after start and therefore will get current epoch for Ethereum, after that it will be able to mine Ethereum fork.
   If you mine Expanse, the best way is to specify "-allcoins exp", in this mode devfee mining will be on Expanse too and DAG won't be recreated at all.

-etht   Time period between Ethereum HTTP requests for new job in solo mode, in milliseconds. Default value is 200ms.

-erate   send Ethereum hashrate to pool. Default value is "1", set "-erate 0" if you don't want to send hashrate.

-estale   send Ethereum stale shares to pool, it can increase effective hashrate a bit. Default value is "1", set "-estale 0" if you don't want to send stale shares.

-dpool    Decred/Siacoin/Lbry/Pascal pool address. Use "http://" prefix for HTTP pools, "stratum+tcp://" for Stratum pools. If prefix is missed, Stratum is assumed.
   Decred: both Stratum and HTTP are supported. Siacoin: both Stratum and HTTP are supported, though note that not all Stratum versions are supported currently. Lbry: only Stratum is supported.

-dwal   Your Decred/Siacoin/Lbry/Pascal wallet address or worker name, it depends on pool.

-dpsw    Password for Decred/Siacoin/Lbry/Pascal pool.

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).
   Use "-di detect" value to detect correct GPU order for temperatures management (requires non-zero "-tt" option); note that it will not work properly if you do not want to assign all GPUs to miner.
   You can also turn on/off cards in runtime with "0"..."9" keys and check current statistics with "s" key.

-gser   this setting can improve stability on multi-GPU systems if miner hangs during startup. It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.
   Default value is "0" (no serialization, fast initialization).

-mode   Select mining mode:
   "-mode 0" (default) means dual Ethereum + Decred/Siacoin/Lbry mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

-dcoin   select second coin to mine in dual mode. Possible options are "-dcoin dcr", "-dcoin sc", "-dcoin lbc", "-dcoin pasc". Default value is "dcr".

-dcri   Decred/Siacoin/Lbry/Pascal intensity. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
   You can also specify values for every card, for example "-dcri 30,100,50".
   You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
   For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.

-dcrt   Time period between Decred/Siacoin HTTP requests for new job, in seconds. Default value is 5 seconds.

-ftime   failover main pool switch time, in minutes, see "Failover" section below. Default value is 30 minutes, set zero if there is no main pool.

-wd    watchdog option. Default value is "-wd 1", it enables watchdog, miner will be closed (or restarted, see "-r" option) if any thread is not responding for 1 minute or OpenCL call failed.
   Specify "-wd 0" to disable watchdog.

-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
   "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
   So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line there: "shutdown /r /t 5 /f".

-retrydelay   delay, in seconds, between connection attempts. Default values is "20". Specify "-retrydelay -1" if you don't need reconnection, in this mode miner will exit if connection is lost.

-dbg   debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
   "-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.

-logfile debug log file name. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string.
   If missed, default file name will be used.

-nofee   set "1" to cancel my developer fee at all. In this mode some optimizations are disabled so mining speed will be slower by about 4%.
   By enabling this mode, I will lose 100% of my earnings, you will lose only 2-3% of your earnings.
   So you have a choice: "fastest miner" or "completely free miner but a bit slower".
   If you want both "fastest" and "completely free" you should find some other miner that meets your requirements, just don't use this miner instead of claiming that I need
   to cancel/reduce developer fee, saying that 1-2% developer fee is too much for this miner and so on.

-li   low intensity mode. Reduces mining intensity, useful if your cards are overheated. Note that mining speed is reduced too.
   More value means less heat and mining speed, for example, "-li 10" is less heat and mining speed than "-li 1". You can also specify values for every card, for example "-li 3,10,50".
   Default value is "0" - no low intensity mode.

-lidag   low intensity mode for DAG generation, it can help with OC or weak PSU. Supported values are 0, 1, 2, 3, more value means lower intensity. Example: "-lidag 1".
   You can also specify values for every card, for example "-lidag 1,0,3". Default value is "0" (no low intensity for DAG generation).

-tt   set target GPU temperature. For example, "-tt 80" means 80C temperature. You can also specify values for every card, for example "-tt 70,80,75".
   You can also set static fan speed if you specify negative values, for example "-tt -50" sets 50% fan speed. Specify zero to disable control and hide GPU statistics.
   "-tt 1" (default) does not manage fans but shows GPU temperature and fan status every 30 seconds. Specify values 2..5 if it is too often.
   Note: for NVIDIA cards only temperature monitoring is supported, temperature management is not supported.
   Note: for Linux gpu-pro drivers, miner must have root access to manage fans, otherwise only monitoring will be available.

-ttdcr   reduce Decred/Siacoin/Lbry/Pascal intensity automatically if GPU temperature is above specified value. For example, "-ttdcr 80" reduces Decred intensity if GPU temperature is above 80C.
   You can see current Decred intensity coefficients in detailed statistics ("s" key). So if you set "-dcri 50" but Decred/Siacoin intensity coefficient is 20% it means that GPU currently mines Decred/Siacoin at "-dcri 10".
   You can also specify values for every card, for example "-ttdcr 80,85,80". You also should specify non-zero value for "-tt" option to enable this option.
   It is a good idea to set "-ttdcr" value higher than "-tt" value by 3-5C.
   NOTE: Check "KNOWN ISSUES" section. GPU indexes in temperature control sometimes don't match GPU indexes in mining!

-ttli   reduce entire mining intensity (for all coins) automatically if GPU temperature is above specified value. For example, "-ttli 80" reduces mining intensity if GPU temperature is above 80C.
   You can see if intensity was reduced in detailed statistics ("s" key).
   You can also specify values for every card, for example "-ttli 80,85,80". You also should specify non-zero value for "-tt" option to enable this option.
   It is a good idea to set "-ttli" value higher than "-tt" value by 3-5C.
   NOTE: Check "KNOWN ISSUES" section. GPU indexes in temperature control sometimes don't match GPU indexes in mining!

-tstop   set stop GPU temperature, miner will stop mining if GPU reaches specified temperature. For example, "-tstop 95" means 95C temperature. You can also specify values for every card, for example "-tstop 95,85,90".
   This feature is disabled by default ("-tstop 0"). You also should specify non-zero value for "-tt" option to enable this option.
   NOTE: Check "KNOWN ISSUES" section. GPU indexes in temperature control sometimes don't match GPU indexes in mining!
   If it turned off wrong card, it will close miner in 30 seconds.
   You can also specify negative value to close miner immediately instead of stopping GPU, for example, "-tstop -95" will close miner as soon as any GPU reach 95C temperature.

-fanmax   set maximal fan speed, in percents, for example, "-fanmax 80" will set maximal fans speed to 80%. You can also specify values for every card, for example "-fanmax 50,60,70".
   This option works only if miner manages cooling, i.e. when "-tt" option is used to specify target temperature. Default value is "100".
   Note: for NVIDIA cards this option is not supported.

-fanmin   set minimal fan speed, in percents, for example, "-fanmin 50" will set minimal fans speed to 50%. You can also specify values for every card, for example "-fanmin 50,60,70".
   This option works only if miner manages cooling, i.e. when "-tt" option is used to specify target temperature. Default value is "0".
   Note: for NVIDIA cards this option is not supported.

-cclock   set target GPU core clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0".
   Unfortunately, AMD blocked underclocking for some reason, you can overclock only.
   Note: for NVIDIA cards this option is not supported.

-mclock   set target GPU memory clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-mclock 1200,1250,1200,0".
   Unfortunately, AMD blocked underclocking for some reason, you can overclock only.
   Note: for NVIDIA cards this option is not supported.

-powlim set power limit, from -50 to 50. If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,-20,0,10".
   Note: for NVIDIA cards this option is not supported.

-cvddc   set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported.

-mvddc   set target GPU memory voltage, multiplied by 1000. For example, "-mvddc 1050" means 1.05V. You can also specify values for every card, for example "-mvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported.

-mport   remote monitoring/management port. Default port is 3333, specify "-mport 0" to disable remote monitoring/management feature.
   Specify negative value to enable monitoring (get statistics) but disable management (restart, uploading files), for example, "-mport -3333" enables port 3333 for remote monitoring, but remote management will be blocked.
   You can also use your web browser to see current miner state, for example, type "localhost:3333" in web browser.

-colors enables or disables colored text in console. Default value is "1", use "-colors 0" to disable coloring.



CONFIGURATION FILE

You can use "config.txt" file instead of specifying options in command line.
If there are not any command line options, miner will check "config.txt" file for options.
If there is only one option in the command line, it must be configuration file name.
If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.
Place one option per line, if first character of a line is ";" or "#", this line will be ignored.
You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.



SAMPLE USAGE

Dual mining:

 ethpool, ethermine  (and Stratum for Decred):
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x
   you can also specify "-esm 1" option to enable "qtminer" mode, in this mode pool will display additional information about shares (accepted/rejected), for example:
   EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 1 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x

 ethpool, ethermine  (and Siacoin solo):
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://localhost:9980/miner/header -dcoin sia

 ethpool, ethermine  (and Siacoin pool):
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=3be0304dee313515cf401b8593a0c1df905ed13f0adaee89a8d7337d2ba8209e5ca9f297bbc2 -dcoin sia

 ethpool, ethermine  (and Siacoin pool with worker name):
      EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=YourSiaAddress&worker=YourWorkerName" -dcoin sia

 same for siamining pool:
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool "http://siamining.com:9980/miner/header?address=3be0304dee313515cf401b8593a0c1df905ed13f0adaee89a8d7337d2ba8209e5ca9f297bbc2&worker=YourWorkerName" -dcoin sia

 dwarfpool (and Stratum for Decred):
   EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x
   Read dwarfpool FAQ for additional options, for example, you can setup email notifications if you specify your email as password.

 dwarfpool (and Stratum for Lbry):
   EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal Redhex.my -dpsw x -dcoin lbc
   Read dwarfpool FAQ for additional options, for example, you can setup email notifications if you specify your email as password.

 nanopool Ethereum+Siacoin:
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=YOUR_SIA_WALLET&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL" -dcoin sia

 nanopool Ethereum+Siacoin(Stratum):
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET/YOUR_WORKER/YOUR_EMAIL -dcoin sia

 nicehash Ethereum+Decred:
EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr

 miningpoolhub Ethereum+Siacoin:
   EthDcrMiner64.exe -epool us-east1.ethereum.miningpoolhub.com:20536 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -eworker YourLogin.YourWorkerName -epsw x -allpools 1 -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal username.workername -dpsw x -dcoin sia
   you must also create worker "YourWorkerName" on pool and specify your wallet address there.

 suprnova Ethereum_Classic(ETC)+Siacoin:
   ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal YourLogin.YourWorkerName -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal YourLogin.YourWorkerName -dpsw x -dcoin sia -allpools 1 -allcoins -1

 coinotron:
   EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x -allpools 1

 coinmine:
   EthDcrMiner64.exe -epool eth.coinmine.pl:4000 -ewal USERNAME.WORKER -esm 2 -epsw WORKER_PASS -allpools 1 -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal USERNAME.WORKER -dpsw WORKER_PASS

 ethpool+suprnova Ethereum+Pascal:
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://pasc.suprnova.cc:5279 -dwal YourLogin.YourWorkerName -dpsw x -dcoin pasc -allpools 1

  nanopool Ethereum+Pascal:
   EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal YourPascalAddress.YourPaymentID.YourWorkerName -dpsw x -dcoin pasc


Ethereum-only mining:

 ethpool:
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

 f2pool:
   EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

 nanopool:
   EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

 nicehash:
   EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0

Ethereum forks mining:

   EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1

Ethereum SOLO mining (assume geth is on 192.168.0.1:8545):

   EthDcrMiner64.exe -epool http://192.168.0.1:8545



FAILOVER

Use "epools.txt" and "dpools.txt" files to specify additional pools. These files have text format, one pool per line. Every pool has 3 connection attempts.
Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.
If the first character of a line is ";" or "#", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing.
If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.
You can reload "epools.txt" and "dpools.txt" files in runtime by pressing "r" key.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.
You can also use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.



REMOTE MONITORING/MANAGEMENT

Miner supports remote monitoring/management via JSON protocol over TCP/IP sockets, HTTP is supported as well
Start "EthMan.exe" from "Remote management" subfolder (Windows version only).
Check "Help" tab for built-in help.



KNOWN ISSUES

- Weak/old cards like 7xxx/270/270X cannot handle dual mining properly, Ethereum mining is slower by about 5%.
- AMD cards: GPU indexes in temperature control sometimes don't match GPU indexes in mining. Miner has to enumerate GPUs via OpenCL API to execute OpenCL code, and also it has to enumerate GPUs via ADL API to manage temperature/clock.
And order of GPUs in these lists can be different. There is no way to fix GPUs order automatically, thanks to AMD devs.
But you can do it manually. For example, if you have two cards, you can change their order by adding "-di 10". Another example, reverse order for six cards: "-di 543210".
Also you can do it automatically (experimental feature) with "-di detect" option.
- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions.
  I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad.
  Note that I can guarantee clean binaries only for official links in my posts on this forum (bitcointalk). If you downloaded miner from some other link - it really can be a virus.
  However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.
- LBC PoW is not very good for dual mining, it causes a bit less Ethereum mining speed.



TROUBLESHOOTING

1. Install Catalyst v15.12 (for AMD cards).
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB.
5. Reboot computer.
6. Check hardware, risers.
7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.
 


FAQ

- What is dwarfpool proxy (eth-proxy)?
Official Ethereum miner does not support Stratum protocol, it supports HTTP protocol only. It causes less profit because of delays.
A proxy was created to fix it, so official Ethereum miner is locally connected to the proxy by HTTP protocol, for local network delays due to HTTP protocol are small. Proxy is connected to the pool via Stratum protocol so it has small delays too. Currently most pools support Stratum and you have to use HTTP-to-Stratum proxy to make official miner work with pools properly. Of course you can try to connect official miner to a pool directly via HTTP but you will lose 10-20% shares because of a short block time in Ethereum.
This miner does not use HTTP protocol, it uses Stratum directly. So you should connect it directly to the pool at Stratum port and it will work a bit faster than official miner via proxy because there is no proxy between miner and pool.

- What command option X means?
  Read "Readme!!!.txt", "COMMAND LINE OPTIONS" section.

- How to mine using pool X?
  Read "Readme!!!.txt", "SAMPLE USAGE" section.

- Why wrong temperature is displayed?
  Read "Readme!!!.txt", "KNOWN ISSUES" section.

- Windows 10 marks miner as a virus.
  Read "Readme!!!.txt", "KNOWN ISSUES" section.

- Can miner stop overheated GPU?
  Yes, see "-tstop" option.

- Why miner does not stop overheated GPU immediately?
  See question above about wrong temperatures.

- Why this command line doesn't work (escaping '&')?
  Char '&' in command line means command separator, to use it in command line either quote string with "", or escape '&' (use ^& on Windows).
  No need to do this in *pools.txt or config.txt.
  Also all command line options must be in same line in .bat file, don't split them to several lines, it won't work.

- How to mine Decred or Sia ONLY with this Ethereum Dual miner?
  No way. It is Ethereum miner with extra bonus coins. To mine extra coins only use other miners.

- Why Ethereum hashrate in Dual mode is higher than in Single mode?
  Hardware feature, accept it as an extra bonus.

- Is 15.12 driver mandatory?
  Usually latest drivers work well. But there are some reports of people where they don't. So 15.12 is recommended.

- Will newer drivers have higher/lower hashrate?
  Usually no, but it depends... Check for yourself.

- Why miner does not show temperatures for RX 480 cards?
  They use newer overdrive API which is not yet published by AMD.

- Why miner on Linux with stock card settings gives a bit lower hashrate than on Windows?
  This probably is the difference in time calculations on both platforms. In reality the accepted hashrate is usually the same.

- Why -cclock/-mclock options do not work?
  Sometimes they do not work. Use Afterburner or Trixx on Windows, atitweak and other tools on Linux instead.

- Why my GPU is 10C hotter in Dual mode?
  This is a price for the extra work done. It also consumes more power, so make sure your PSU has sufficient power.

- Can the temperature be lowered?
  Yes, see "-tt", "-dcri", "-ttdcr", "-li" options.

- How can I undervolt my cards on Linux?
  Usually only by flashing modified GPU BIOS. Unfortunately, no standard way of doing so.

- Why pool shows less hashrate than miner?
  On my test rigs I use miner with default settings and on pool I see about 4-5% less than miner shows (my hashrate is about 800MH/s if I turn on all rigs).
  Miner shows "raw" hashrate, 2% is devfee in dual mode, other 2-3% can be related to the connection quality, current pool status/luck or/and may be something else.
  Also, from my calculations miner loses about 0.5-1% because it cannot drop current GPU round when it gets new job, it is related to "-ethi" value, so I made it 8 by default instead of 16.
  But if on pool you see 10% less than miner shows all the time - something is wrong with pool, your connection to internet or your hashrate is low and you did not wait enough time to see average hashrate for 24 hours.
  Usually I use "ethpool" pool for tests.

- I see only one card via Remote Desktop Connection.
  It's a problem of RDC, use TeamViewer or some other remote access software.

- I see only one card instead of two in temperature management info.
  Disable CrossFire.

- Miner works in ETH-only mode but crashes in dual mode.
  Dual mode requires more power, so make sure PSU power is enough and check GPU clocks if you OC'ed them.

- Error "server: bind failed with error".
  Specify "-mport 0" option.

- How can I get stats from miner as EthMan does?
  Start EthMan and catch its tcp/ip data with WireShark, you will see json protocol details.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: blastbob on April 11, 2016, 03:39:25 PM
My antivirus removed the file as soon as it was available.

So ill keep off until some more comments are available :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 03:51:50 PM
My antivirus removed the file as soon as it was available.

So ill keep off until some more comments are available :)

I pack my miners to prevent disassembling. Some paranoid antiviruses treats any packer as a virus. I'm trying to fix it, but not sure that it is possible for all antiviruses.
If you think that I write viruses - do not use this miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dannygroove on April 11, 2016, 04:08:51 PM
Going to try it

edit: file is clean


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ol92 on April 11, 2016, 04:18:59 PM
What is the hashrate for a r9 290x or r9 390?
Thanks.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: bathrobehero on April 11, 2016, 04:51:23 PM
Any chance to do the same for nvidia?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dannygroove on April 11, 2016, 04:54:03 PM
Im using dwarfpool proxy and trying to run it. My miner fails to initialize when I execute it.

Conf file: EthDcrMiner64 -epool http://192.168.0.101:8080 -ewal 4280x -epsw x -esm 0 -dpool http://dcr.suprnova.cc:9112 -dwal xxxxx.1 -dpsw x

Am I missing something?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Genoil on April 11, 2016, 04:56:03 PM
+1 for competition  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: bensam1231 on April 11, 2016, 05:05:32 PM
Make it happen Genoil. I believe.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 05:07:58 PM
Im using dwarfpool proxy and trying to run it. My miner fails to initialize when I execute it.

Conf file: EthDcrMiner64 -epool http://192.168.0.101:8080 -ewal 4280x -epsw x -esm 0 -dpool http://dcr.suprnova.cc:9112 -dwal xxxxx.1 -dpsw x

Am I missing something?

The miner already uses Stratum. No proxies are required. Connect it directly to eth-eu.dwarfpool.com:8008 or to any pool that supports Stratum for Ethereum.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: antantti on April 11, 2016, 05:22:39 PM
Testing it right now on 2x390 + old cpu and mobo, Windows 7 x64, 15.12. Clocks 1100/1250 undervolted -100mV.

I must say I am amazed. Eth is just a bit faster reporting steady 30.95MH per card, on top of that I am getting 0.464GH (1.9GH with sgminer) dcr per GPU. 50W LESS from the wall.

Testing continues...

edit: No change in memory controller load

edit2: Test rig 2, old mobo and CPU, 2x 295x2 + 290, windows 7 x64, 15.7.1, OS controlled virtual memory. It just works, 151MH eth + 2.2GH dcr without tuning. Dcr poolside efficiency 90-95%.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dannygroove on April 11, 2016, 05:48:25 PM
Got it working, getting accepted shares on DCR but its all rejected for ETH.

edit: Had a card sick and didnt notice. A clean restart and its all going smooth.

edit2: Lots of driver crashes, Im using win7 x64 with 15.12 drivers. Could it be that I have a mix of GPUs? 3 R9 280X & 1 R9 390


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 11, 2016, 06:23:46 PM
DCR works but all ETH shares are rejected.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 07:05:42 PM
Got it working, getting accepted shares on DCR but its all rejected for ETH.

edit: Had a card sick and didnt notice. A clean restart and its all going smooth.

edit2: Lots of driver crashes, Im using win7 x64 with 15.12 drivers. Could it be that I have a mix of GPUs? 3 R9 280X & 1 R9 390

I have a rig 4 380x + 2 390 - works ok. So check overclocking, power, all items in "troubleshooting" section of readme.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 07:07:25 PM
DCR works but all ETH shares are rejected.

Check all items in "troubleshooting" section.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 11, 2016, 07:21:46 PM
Found the problem, for some reason it doesn't work with Miningpoolhub but works with Ethermine

EDIT

Also whats good about this miner is that if one GPU crashes the rest still mine unlike ethminer which stops the entire program.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 07:49:22 PM
If the miner doesn't work with some pool - let me know its address and port, I'll check it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: DragonSlayer on April 11, 2016, 07:53:06 PM
Anyone care to share command line for supernova?  I seem to not be able to get it to start.  Pretty sure something on my end.

Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 07:57:23 PM
Anyone care to share command line for supernova?  I seem to not be able to get it to start.  Pretty sure something on my end.

Thanks

Suprnova is supported for Decred only. Ethereum is not supported for this pool for now because it does not accept Ethereum wallet addresses, read OP for details.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dominuspro on April 11, 2016, 07:59:25 PM
Found the problem, for some reason it doesn't work with Miningpoolhub but works with Ethermine

Same story there... Dwarfpool all rejected eth shares, ethermine all accepted.

The miner seems great so far. On my R9 390 at 1150MHz and -dcri 35 it makes 31.5Mh eth + 550Mh dcr. The power usage seems a little bit higher, I had to increase fan from 45 to 50% to keep the gpu at 70°C.
btw I'm using 2x 750ti in the same pc without any issues.

Claymore You are a genius :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 08:06:02 PM
Found the problem, for some reason it doesn't work with Miningpoolhub but works with Ethermine

Same story there... Dwarfpool all rejected eth shares, ethermine all accepted.

My command line:
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x

It works, so Dwarfpool is supported. Are you sure that it does not work for you?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dominuspro on April 11, 2016, 08:22:15 PM
Found the problem, for some reason it doesn't work with Miningpoolhub but works with Ethermine

Same story there... Dwarfpool all rejected eth shares, ethermine all accepted.

My command line:
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x

It works, so Dwarfpool is supported. Are you sure that it does not work for you?

I have tried dwarf eu and ru servers with almost all rejects. I have no idea why.
My bat(just removed dcr user and pass):
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x1e94b2163659fcc3da728c747ebffb8ac3bf360a.390 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal xxx -dpsw xxx -dcri 35


edit:
The dwarf bat:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0x1e94b2163659fcc3da728c747ebffb8ac3bf360a/390 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal xxx -dpsw xxx -dcri 35


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 08:28:04 PM

I have tried dwarf eu and ru servers with almost all rejects. I have no idea why.


I test it now and see some rejects. But there are big delays in responses from dwarfpool, also dwarfpool.com does not work, so perhaps the problem is on their side. I will check it again when dwarfpool comes back.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 11, 2016, 08:36:40 PM
If the miner doesn't work with some pool - let me know its address and port, I'll check it.

POOL_HOST = "us-east1.ethereum.miningpoolhub.com"
POOL_PORT = 20536


all shares rejected


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Agent412 on April 11, 2016, 08:41:58 PM
Can someone give me a tutorial of how to set this up to mine with nanopool?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dannygroove on April 11, 2016, 09:00:31 PM
Found the problem, for some reason it doesn't work with Miningpoolhub but works with Ethermine

EDIT

Also whats good about this miner is that if one GPU crashes the rest still mine unlike ethminer which stops the entire program.

I noticed that too, but in my case I figured it because the "sick" GPU was running at 35C. The miner itself kept showing the card as if it was mining, probably a small bug.

Can someone give me a tutorial of how to set this up to mine with nanopool?

Read the OP, its all there!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: SIRacer09 on April 11, 2016, 09:22:47 PM
Nice miner!  Running about 1.5GHs.  What should be Diff be on the pool?  8 or 64?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: murders10 on April 11, 2016, 09:23:24 PM
Thank u for the awesome as always  miner Claymore.

Mining for the one hours now and everything seem ok.
what we need is watchdog option u did before and I'm sure you can and u will  ;D
what is seem to me i have the same speed as rthminer Miner R9 280x's.

One more thing is there is anyway to color the output of etc Coin when u Dual mining. coz it's not easy to tell with coin and what speed confusing actually.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Tmdz on April 11, 2016, 09:25:36 PM
Miner works well but heres my observation.

2 x 7950 gpu cards

ETH speed seems to have a linear decrease as you push the decred intensity up and at current prices there is no advantage to the dual mining.  So for example at stock settings I hash 31 mh/s eth and 475 mh/s decred so the earning work out to be equal if I dual mine or mine eth only.  If decred prices goes up then there would be an advantage to using this miner but currently not really (possibly very slight).

Decred price is quite low so I think it will go up and make this more valuable.  My current settings is decred set to 15 and I get 250 mh decred and 33.7 mh ETH.  If decred price rises then you can tweak the settings to reach maximum profit.  So i think its interesting to dual mine on that aspect

Is there a way to modify the global work value?  I think I could get better results if I could

Thank you for your work.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: antantti on April 11, 2016, 09:32:36 PM
Did some tests with 7970 and it sure looks like it is not worth merge mine with them. But hawaii gets a nice earning boost from this miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 11, 2016, 09:32:44 PM
Yeah I did some calculations and with DCR mining its about 8% more profit but it uses more heat so I disabled it.

Speeds seem to be identical to the genoil v1.0.4 miner, but about 5% faster then the stock ethminer. However with this miner if a GPU dies it still continues mining with the other GPUs so don't need email alerts.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: phzi on April 11, 2016, 09:45:07 PM
If the miner doesn't work with some pool - let me know its address and port, I'll check it.

f2pool (which works fine with eth-proxy) doesn't work

Stratum - connecting to 'eth.f2pool.com' <139.196.206.207> port 8008
Stratum - Connected
Received error: {"jsonrpc":"2.0","id":2,"result":["0x54909b5742f7b3d326ff65764cbd1926c6d7d5bc9aaf6057a2cc0a78209e965c","0x67f3589ac683de3f41fe727f3860c421a
c1eb1b0fdf36289f99b3cbe89a2b3a3","0x00000001ffffffffffffffffffffffffffffffffffffffffffffffffffffffff"],"error":null}


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 09:50:15 PM
If the miner doesn't work with some pool - let me know its address and port, I'll check it.

f2pool (which works fine with eth-proxy) doesn't work


I cannot find any Ethereum mining info on "f2pool.com". Perhaps it does not accepts wallet addresses but requires Login.Worker username format, such pools are not supported.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: omnik on April 11, 2016, 09:52:02 PM
Miner seems slower then genoil on R9 270(X) cards, even in -mode 1... I get similar results as with genoil miner for R9 380 and 280X.

Anyway, interesting stuff but in reality no use for eth+dcr mining.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 09:53:45 PM
Miner works well but heres my observation.

2 x 7950 gpu cards

ETH speed seems to have a linear decrease as you push the decred intensity up and at current prices there is no advantage to the dual mining.  So for example at stock settings I hash 31 mh/s eth and 475 mh/s decred so the earning work out to be equal if I dual mine or mine eth only.  If decred prices goes up then there would be an advantage to using this miner but currently not really (possibly very slight).

Decred price is quite low so I think it will go up and make this more valuable.  My current settings is decred set to 15 and I get 250 mh decred and 33.7 mh ETH.  If decred price rises then you can tweak the settings to reach maximum profit.  So i think its interesting to dual mine on that aspect

Is there a way to modify the global work value?  I think I could get better results if I could

Thank you for your work.

I don't have 7xxx cards but probably they cannot handle dual mining properly. You can disable it then. You will get best speed with 280(x)/380(x)/290(x)/390(x)/Fury(Nano/x) cards.
global work value is set to the best already, there is no sense to change it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 09:54:39 PM
Miner seems slower then genoil on R9 270(X) cards, even in -mode 1... I get similar results as with genoil miner for R9 380 and 280X.

Anyway, interesting stuff but in reality no use for eth+dcr mining.

Check "KNOWN ISSUES" section in OP.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Charloz24 on April 11, 2016, 09:57:54 PM
I am aware that 270 270x get less performance, but I want to try it on a r7 370. The program crash when he try to create DAG (at 1%). I checked the readme and did all that is described in the troubleshooting section.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: omnik on April 11, 2016, 09:58:57 PM
Miner seems slower then genoil on R9 270(X) cards, even in -mode 1... I get similar results as with genoil miner for R9 380 and 280X.

Anyway, interesting stuff but in reality no use for eth+dcr mining.

Check "KNOWN ISSUES" section in OP.

Got it now, thanks.
I have many 270 and 270X cards, even mixed with other cards... so if you want to test future improvements (as stated in OP), feel free to PM me.
I will gladly try to help.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 10:02:02 PM
Thank u for the awesome as always  miner Claymore.

Mining for the one hours now and everything seem ok.
what we need is watchdog option u did before and I'm sure you can and u will  ;D
what is seem to me i have the same speed as rthminer Miner R9 280x's.

One more thing is there is anyway to color the output of etc Coin when u Dual mining. coz it's not easy to tell with coin and what speed confusing actually.

Agreed, coloring is a good idea.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Boathouse on April 11, 2016, 10:09:29 PM
Do you mean the Catalyst 15.12 or the Crimson 15.12?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: phzi on April 11, 2016, 10:29:37 PM
I cannot find any Ethereum mining info on "f2pool.com". Perhaps it does not accepts wallet addresses but requires Login.Worker username format, such pools are not supported.

https://www.f2pool.com/help
"
eth.f2pool.com:8008

How to mine Ethereum at F2Pool?

Please configure your eth-proxy set either WALLET to your payout address or MONITORING_EMAIL to your F2Pool user name or login email. If you leave MONITORING_EMAIL empty, the workers page is available at https://www.f2pool.com/eth/<account>. Otherwise you can also check your account info on your logged-in dashboard.
"

Based on the console output, it just seems your miner doesn't understand the work JSON.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Genoil on April 11, 2016, 10:35:22 PM
tested mode 1 against my 1.0.7b on ye olde 7950. mine seems just a bit faster (like 100KH/s), although the difference is more likely to be result of a different way of calculating the hashrate than a real difference in performance.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 11, 2016, 11:14:07 PM
tested mode 1 against my 1.0.7b on ye olde 7950. mine seems just a bit faster (like 100KH/s), although the difference is more likely to be result of a different way of calculating the hashrate than a real difference in performance.

Yeah I noticed the same thing, however with his miner my GPUs are all at 100% pretty much with yours they range from 97-99%. So who knows which is faster. Impossible to test since speeds are almost the same.


Claymore, do you know when MiningPoolHub will be added ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Jacques21 on April 11, 2016, 11:20:50 PM
for some reason it shows 0.00 mh/s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: melloyellow on April 11, 2016, 11:21:09 PM
nanopool doesn't seem to work with the stratum port, 9999.  The miner finds and submits shares, they just don't show up in stats.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 11, 2016, 11:28:53 PM
I will check/fix all pools that you mention here within 24 hours.
PS. It seems dwarfpool (at least eth-eu.dwarfpool.com:8008) is working properly now, no rejects. So the problem was on their side.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: melloyellow on April 11, 2016, 11:35:47 PM
I will check/fix all pools that you mention here within 24 hours.
PS. It seems dwarfpool (at least eth-eu.dwarfpool.com:8008) is working properly now, no rejects. So the problem was on their side.

It looks like it has something to do with adding the worker name to the end of the eth address at nanopool.  I erased my workername and the rig showed up.

Thanks Claymore.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: helipotte on April 12, 2016, 12:17:11 AM
Will support for solo mining be added?  Maybe solo mining using a "proxy" like Etherproxy.  Format is //192.168.1.50/miner/50/miner_name

This proxy-->  https://github.com/sammy007/ether-proxy (https://github.com/sammy007/ether-proxy)

Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: phzi on April 12, 2016, 12:22:04 AM
I will check/fix all pools that you mention here within 24 hours.

Claymore the man!

Ethereum's "stratum" is a bit of a disaster.  Tons of different implementations that vary slightly.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Nikolaj on April 12, 2016, 12:25:20 AM
thanks for the very nice tool claymore !

btw It seems that there are some issues with the values reported:

client side 25.401 ETH, pool side 18
client side 1260 DCR, pool side 800


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 12, 2016, 12:32:22 AM
During the DAG change some GPUs don't mine properly and get error

OpenCL - cannot write big buffer with DAG


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: murders10 on April 12, 2016, 12:33:57 AM
During the DAG change some GPUs don't mine properly and get error

OpenCL - cannot write big buffer with DAG

Confirming just happened and it's always GUP 0  ???


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: fr4nkthetank on April 12, 2016, 02:41:00 AM
I have heard through the grapevine you can have the miner up and running, then load sgminer and mine something else ?  how does this affect the gpu ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: bensam1231 on April 12, 2016, 02:54:16 AM
Looks as though AMD miners aren't seeing a huge benefit from merge mining on lower end AMD GPUs. Higher end ones are giving a boost in DCR mining. I'm guessing this due to the fact that the GPU is actually being utilized and it's not completely memory locked.

Nvidia GPUs would see probably pretty close to full utilization on DCR considering they're pretty memory bound with ample GPU processing.

Consider making it compatible with Nvidia GPUs as well... they also support OCL, so it wouldn't need to change to support CUDA.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: peteycamey on April 12, 2016, 03:52:40 AM
no support for coinotron?

why Login.Worker not supported?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Jacques21 on April 12, 2016, 03:54:55 AM
no support for coinotron?

why Login.Worker not supported?

Im hoping he can get it so that login.worker works.

For now i wont use it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Eliovp on April 12, 2016, 04:57:05 AM
Yeah.. being able to mine to my own running proxy is a must for me. "Login.worker style"..

Nice work none the less. :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 05:50:48 AM
Yeah.. being able to mine to my own running proxy is a must for me. "Login.worker style"..

Nice work none the less. :)

I will add Login.worker support very soon.
Why do you need a proxy anyway?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Ayers on April 12, 2016, 06:35:37 AM
this work with the proxy for dwarf? because i'm mining with a sensible increase in profit with that proxy i don't want to give up to it


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 06:51:17 AM
this work with the proxy for dwarf? because i'm mining with a sensible increase in profit with that proxy i don't want to give up to it

It seems many people don't understand how it works so I need to put some explanations here.
What is dwarfpool proxy (eth-proxy)?
Official Ethereum miner does not support Stratum protocol, it supports HTTP protocol only. It causes less profit because of delays.
A proxy was created to fix it, so official Ethereum miner is locally connected to the proxy by HTTP protocol, for local network delays due to HTTP protocol are small. Proxy is connected to the pool via Stratum protocol so it has small delays too. Currently most pools support Stratum and you have to use HTTP-to-Stratum proxy to make official miner work with pools properly. Of course you can try to connect official miner to a pool directly via HTTP but you will lose 10-20% shares because of a short block time in Ethereum.
My miner does not use HTTP protocol, it uses Stratum. So you should connect it directly to the pool at Stratum port and it will work a bit faster than official miner via proxy because there is no proxy between miner and pool.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dannygroove on April 12, 2016, 07:04:36 AM
Although my drivers are crashing, I haven't gone full test mode.. I had a pretty busy day to even think about start testing properly = reformat my PC, re-install drivers and run "correctly".

I'll be back tomorrow with some test results. Got plenty of GPUs to squeeze to the limit as power is not one of my nemesis'.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ldw-com on April 12, 2016, 07:08:27 AM
Yeah.. being able to mine to my own running proxy is a must for me. "Login.worker style"..

Nice work none the less. :)

I will add Login.worker support very soon.
Why do you need a proxy anyway?

Because if you have 20+ rigs, you only need to change proxy settings to do adjustments.

In this case, with new mining software, it's a different story, but still if you want to switch pools after that. A proxy is VERY handy :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 07:09:55 AM
Yeah.. being able to mine to my own running proxy is a must for me. "Login.worker style"..

Nice work none the less. :)

I will add Login.worker support very soon.
Why do you need a proxy anyway?

Because if you have 20+ rigs, you only need to change proxy settings to do adjustments.

In this case, with new mining software, it's a different story, but still if you want to switch pools after that. A proxy is VERY handy :)

Ok then I'll create a proxy for my miner, it's not a big deal.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ldw-com on April 12, 2016, 07:22:15 AM
Yeah.. being able to mine to my own running proxy is a must for me. "Login.worker style"..

Nice work none the less. :)

I will add Login.worker support very soon.
Why do you need a proxy anyway?

Because if you have 20+ rigs, you only need to change proxy settings to do adjustments.

In this case, with new mining software, it's a different story, but still if you want to switch pools after that. A proxy is VERY handy :)

Ok then I'll create a proxy for my miner, it's not a big deal.

You'll make a lot of people very happy.

Again, great work!

Don't mind the 1% fee at all! Well deserved!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: a1binos on April 12, 2016, 07:58:38 AM
Dwarfpool don't submit share, if I use format myaddress/rigN


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: arielbit on April 12, 2016, 08:18:14 AM
just want to say

WOW!

and

THANKS!

keep it up 8)

AMD should release 390x claymore edition   ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: qqqq on April 12, 2016, 08:22:34 AM
Hello, could you make a solo option for ethereum ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dodther on April 12, 2016, 08:53:22 AM
dwarf not working.  reject.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: fenomenhaa on April 12, 2016, 08:58:40 AM
How can i fix this?
http://i.imgur.com/YGQMaZJ.jpg


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Techray on April 12, 2016, 09:13:17 AM
For my 7970, there is no noticeable increase. For my R9 390, the improvement is  around  4-5%. So it is good.
But the computer is less responsive.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 09:26:45 AM
Thanks!

 R9 Nano
-dcri 100 - 27m eth and 1360m dcr
-dcri 60 - 28.8m eth and 760m dcr
-dcri 30 - 27m eth and 416m dcr

 https://forum.bits.media/index.php?/topic/19156-dcr-decred-gibridnyi-powpos-btcsuite-devs-tonny-novykh-vozmozhnostei-go-18012016/page-38#entry409614

but х11 nicehash more profitable today on my card (5.7$)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ol92 on April 12, 2016, 09:32:08 AM
Thanks!

 R9 Nano
-dcri 100 - 27m eth and 1360m dcr
-dcri 60 - 28.8m eth and 760m dcr
-dcri 30 - 27m eth and 416m dcr

 https://forum.bits.media/index.php?/topic/19156-dcr-decred-gibridnyi-powpos-btcsuite-devs-tonny-novykh-vozmozhnostei-go-18012016/page-38#entry409614
Hello,
Whats setting are you using for the nano ( overclock ? powertune?) please ?
Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 09:32:49 AM
TDP +50% only


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ol92 on April 12, 2016, 09:47:46 AM
TDP +50% only
Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 09:52:40 AM
downvolt -96 mV get 28.8m + 1440m


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: adaseb on April 12, 2016, 09:58:42 AM
The Fury or the 280x/7970 seems best for merged mining.

With a 280X I get like 22MH stock but 21MH/330DCR.

The 7950 or Pitcairns aren't worth it.

With 5x 280x I got this

ETH only 108MH

30%    102MH/1540
50%     94MH/2343
70%     84MH/3000
100%   73MH/3632

EDIT after crunching the numbers the 30% is best and yield 0.0388 BTC per day versus 0.0352 BTC with ETH only mining.
fee not included.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 10:11:01 AM
7xNano the best choise https://forum.bits.media/index.php?/topic/21158-sobiraem-asik-dlia-maininga-etherium-i-ne-tolko/page-4#entry408651


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 10:27:22 AM
-dcri more than 100 need for this cards


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ldw-com on April 12, 2016, 10:43:19 AM
-dcri more than 100 need for this cards

Nano?

What are your complete settings?

100 wil crash the system over here.

Powertune?

mine's at 0%

Core 1000, vddc -100, gives me 28Mh eth per card and 800Mh dcr per card..

Any suggestions?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 10:47:09 AM
screenshot look, driver new maybe need also

https://forum.bits.media/index.php?/topic/19156-dcr-decred-gibridnyi-powpos-btcsuite-devs-tonny-novykh-vozmozhnostei-go-18012016/page-38#entry409614


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ldw-com on April 12, 2016, 10:54:06 AM
screenshot look

https://forum.bits.media/index.php?/topic/19156-dcr-decred-gibridnyi-powpos-btcsuite-devs-tonny-novykh-vozmozhnostei-go-18012016/page-38#entry409614

Congrats!

The only difference we have is that i'm using older drivers. That could indeed help.

If i put -100 mV and +50Powertune it will crash immediately. Mine is a 6card rig, so could be that it can't handle that :)

Thx for the info mate!

Will do some testing!


My 290(reference) rig does best with dcri at 40.

600Mh per card on DCR and 27.5 on Eth.

So i'm very pleased!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 10:59:58 AM
Claymore, i want testing my card on -dcri more than 100, it may get more MH by DCR on same speed ETH

Quote
If i put -100 mV and +50Powertune it will crash immediately.

on mining my Nano stable, but without it may crash  :)


Fury X http://club.dns-shop.ru/forum/?action=go_post&id=1222368


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: dominuspro on April 12, 2016, 11:14:24 AM
I'm still getting rejects on dwarfpool and all accepted on ethermine.

It would be nice to display the number of rejected shares(or accepted) at least for easyer troubleshooting ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 11:23:40 AM
DCR added on good calculator http://www.whattomine.com


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: ldw-com on April 12, 2016, 11:26:47 AM
Claymore, i want testing my card on -dcri more than 100, it may get more MH by DCR on same speed ETH

Quote
If i put -100 mV and +50Powertune it will crash immediately.

on mining my Nano stable, but without it may crash  :)


Fury X http://club.dns-shop.ru/forum/?action=go_post&id=1222368

16.4.1 did the trick! thx mate! :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 11:28:12 AM
 ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Hanty86 on April 12, 2016, 11:55:54 AM
I use Claymore's Dual Ethereum+Decred GPU Miner v1.0 in pool http://ethpool.org
I see in statistic Effective Hashrate   and not see Shares (Invalid / Valid / %)

But miner share found!

http://savepic.ru/9327439.png

It norm?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Ikeet on April 12, 2016, 11:57:23 AM
I set it up last night and ran it on two of my rigs I was very impressed. I am having some problems though. After about 30 min it started rejecting all shares on both coins. I thought maybe it was the dag so I deleted it and started again but it did the same thing. It runs for between 30 min and a hour then it rejects every single share. Any ideas or suggestions?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: alevlaslo on April 12, 2016, 12:07:45 PM
rejects on DCR, not ETH maybe, use port 9115 for DCR


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: LeonardoVega on April 12, 2016, 12:09:14 PM
Reject ETH shares - on 390x and 380.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: arielbit on April 12, 2016, 12:16:31 PM
in the OP it says catalyst (crimson) 15.12

in readme it says catalyst 15.12

what is the best driver here? is it
Quote
radeon-crimson-15.12-with-dotnet45-win7-64bit.exe


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 01:45:59 PM
Reject ETH shares - on 390x and 380.

What pool? I need know at least pool address and port that you use. Otherwise it is senseless. I'm checking all popular pools today and fix issues when I find them.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 01:46:57 PM
in the OP it says catalyst (crimson) 15.12

in readme it says catalyst 15.12

what is the best driver here? is it
Quote
radeon-crimson-15.12-with-dotnet45-win7-64bit.exe

You can download any 15.12 AMD video drivers that you find.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 01:49:52 PM
I use Claymore's Dual Ethereum+Decred GPU Miner v1.0 in pool http://ethpool.org
I see in statistic Effective Hashrate   and not see Shares (Invalid / Valid / %)

But miner share found!

http://savepic.ru/9327439.png

It norm?

Read "readme!!!.txt" or OP. Hint:
-esm   Ethereum Stratum mode. 0 - eth-proxy mode (dwarpool.com), 1 - qtminer mode (ethpool.org). 0 is default, 1 is useful to get detailed statistics about shares on ethpool.org.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: qqqq on April 12, 2016, 02:02:54 PM
What about solo ethereum ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 02:17:12 PM
What about solo ethereum ?

Not right now, have to fix issues with stratum, some pools use a bit different version, they were tested with eth-proxy so it works on all pools but they did not test my miner :) so it doesn't work with some pools.
Today I'll release an update to cover most pools, and with some other improvements.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Strannik-74 on April 12, 2016, 02:17:21 PM
After DEVfee on Ethereum rejected, we have to restart miner?

http://c2n.me/3wPl62S.jpg


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 02:20:07 PM
After DEVfee on Ethereum rejected, we have to restart miner?

No, you don't need to restart it. "DevFee: stop mining" means only that it stops mining for devfee (after 36 or 72 seconds of devfee mining), it does not stop main mining.
Rejected shares is a compatibility issue of my miner, I'm working on this issue, I'll post an update in several hours.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: qqqq on April 12, 2016, 02:36:08 PM
What about solo ethereum ?

Not right now, have to fix issues with stratum, some pools use a bit different version, they were tested with eth-proxy so it works on all pools but they did not test my miner :) so it doesn't work with some pools.
Today I'll release an update to cover most pools, and with some other improvements.

Ok, i got it. Will wait for solo miner. Btw, i'm still using your XPM miners.   :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 02:38:36 PM

Close miner. Check OP to read the path to DAG files. Remove all files from that folder. Start miner again. I will fix it today too.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 02:40:03 PM
What about solo ethereum ?

Not right now, have to fix issues with stratum, some pools use a bit different version, they were tested with eth-proxy so it works on all pools but they did not test my miner :) so it doesn't work with some pools.
Today I'll release an update to cover most pools, and with some other improvements.

Ok, i got it. Will wait for solo miner. Btw, i'm still using your XPM miners.   :)

Do you like Primecoin? :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: qqqq on April 12, 2016, 02:41:15 PM
What about solo ethereum ?

Not right now, have to fix issues with stratum, some pools use a bit different version, they were tested with eth-proxy so it works on all pools but they did not test my miner :) so it doesn't work with some pools.
Today I'll release an update to cover most pools, and with some other improvements.

Ok, i got it. Will wait for solo miner. Btw, i'm still using your XPM miners.   :)

Do you like Primecoin? :)

Yeah))) I was mining XPMs about a year before ETH is grow up.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: restless on April 12, 2016, 02:59:05 PM
Can we use it with dwarf-proxy or just direct miner to dwarf-proxy compatible ports?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Claymore on April 12, 2016, 03:02:37 PM
Can we use it with dwarf-proxy or just direct miner to dwarf-proxy compatible ports?

Read OP, "ADDITIONAL INFORMATION" section.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: restless on April 12, 2016, 03:05:22 PM
A dumb feature request:
- set DAG location (like genoil's -R option)



Damn I have to read more carefully :D

Awesome job btw. I was hoping someone will "crack" the original etereum algo and implement it "proper way"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Marvell1 on April 12, 2016, 03:33:13 PM
A dumb feature request:
- set DAG location (like genoil's -R option)



Damn I have to read more carefully :D

Awesome job btw. I was hoping someone will "crack" the original etereum algo and implement it "proper way"

even if this happens i dont see what difference it will make since everyone else will use the same algo and mining gains will be the same unless its a private kernel.

@Claymore
I prefer coinotron for my pool so i really cant test this miner unless i can use it over my proxy with worker name password thanks for working on those changes.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: murders10 on April 12, 2016, 03:47:58 PM
After DEVfee on Ethereum rejected, we have to restart miner?

No, you don't need to restart it. "DevFee: stop mining" means only that it stops mining for devfee (after 36 or 72 seconds of devfee mining), it does not stop main mining.
Rejected shares is a compatibility issue of my miner, I'm working on this issue, I'll post an update in several hours.

Thank u for that i have to restart the miner every 2h or so.
and please watchdog option that would help allot.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Strannik-74 on April 12, 2016, 04:05:40 PM
and please watchdog option that would help allot.

use nnCron, Create a 2 macro :
1 Kills miner process every 30 minutes .
2 Check whether the miner started every minute and if not then runs it .
In the end, it turns out that every 30 minutes a miner will be restarted .


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: SIRacer09 on April 12, 2016, 04:20:39 PM
I would like to use the -cclock and -mclock for my cards, but I have a mix of 3 7950s and 2 R9 280x.  How can I tell what card is what number?  (0-4)  Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Strannik-74 on April 12, 2016, 04:36:38 PM
I would like to use the -cclock and -mclock for my cards, but I have a mix of 3 7950s and 2 R9 280x.  How can I tell what card is what number?  (0-4)  Thanks!

use -di 0 and see what card is loaded, then add -di 01 and watch what the new card to load and so 4 times.
At all will leave 10 minutes maximum. This is elementary = )


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Marvell1 on April 12, 2016, 06:11:21 PM
and please watchdog option that would help allot.

use nnCron, Create a 2 macro :
1 Kills miner process every 30 minutes .
2 Check whether the miner started every minute and if not then runs it .
In the end, it turns out that every 30 minutes a miner will be restarted .

Thats a waste of time , if its an issue it needs to be fixed by the the developer , I mean hes already taking 2% why should users spend time hacking together fixes for know bugs.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: murders10 on April 12, 2016, 06:38:50 PM
and please watchdog option that would help allot.

use nnCron, Create a 2 macro :
1 Kills miner process every 30 minutes .
2 Check whether the miner started every minute and if not then runs it .
In the end, it turns out that every 30 minutes a miner will be restarted .

Thats a waste of time , if its an issue it needs to be fixed by the the developer , I mean hes already taking 2% why should users spend time hacking together fixes for know bugs.

thank you Strannik i already using .bat script  ;)

Marvell he is already working on it, so give him i brake.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: restless on April 12, 2016, 06:45:48 PM
well... 3h later and altho miner says I have accepted shares, dwarfpool says I gad 0 shares for last 3h

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xMyWallet -epsw x -dpool http://dcr.suprnova.cc:9112 -dwal user.worker -dpsw x

What am i doing wrong :(
DCR mining was ok - shares counted at dcr.suprnova

PS: using mode 1
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0x479bb7dc620957adab4f079b9dd2a481f8b837c4 -epsw x -mode 1
Produced accepted shares showing in my wallet at dwarfpool.
And 'x' was worker name
changing x to 7850 - confirmed that DP is accepting password as worker name in mode 1

Next I'll try again mode 0 with dual-mining and -epsw using worker name


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: FUBAR-BDHR on April 12, 2016, 06:53:18 PM
Will there be a version of this for pools that use username/password instead of address for ethereum?  I don't want to join another pool just to test software. 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 07:32:39 PM
v1.1:

- Fixed issue with rejected shares for dwarfpool (and for other pools that use similar code).
- Fixed issue with f2pool pool.
- Added "-worker" option.
- "-dcri" option: max value is 500 now.
- Added "Rejected shares" info.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: restless on April 12, 2016, 07:39:50 PM
PS: EVERYTHING BELOW IS FOR v.1.0 !

using worker-name as password is better - SOME shares were counted.
But after 15min I realized something is wrong:
 - PC1 (1x290), 11 shares reported from miner, 1 share from DP
 - PC2 (2x265) - 4 shares from miner, 2 shares from DP

And waiting another 15min (miners stopped) didn't help - no new shares counted by DP


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: RoyaLunique on April 12, 2016, 07:40:54 PM
Thanks...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.0
Post by: Marvell1 on April 12, 2016, 07:43:25 PM
using worker-name as password is better - SOME shares were counted.
But after 15min I realized something is wrong:
 - PC1 (1x290), 11 shares reported from miner, 1 share from DP
 - PC2 (2x265) - 4 shares from miner, 2 shares from DP

And waiting another 15min (miners stopped) didn't help - no new shares counted by DP

I'll try it on coinotron this evening as well


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: psk5000 on April 12, 2016, 07:46:37 PM
qtminer = 60mh/s
Claymore = 45mh/s


why ?


(i have 4x r7 370 and crimson 15.12)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: phzi on April 12, 2016, 07:50:06 PM
qtminer = 60mh/s
Claymore = 45mh/s


why ?


(i have 4x r7 370 and crimson 15.12)

Read the known issues...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: soulistyce on April 12, 2016, 07:52:16 PM
ive tested on windows with my 6 r9 280x, at first it all went well, but i didnt detected any improvement to the speed i had i usualy get 123mhs with your miner i get only 112mhs, but still if it mines also decred i want to use it but got no luck....as everyone knows ethminer on some gpus on windows gives problems like stop mining after some hours, dag sometimes as to be rebuild and computer freezes.... and even with your miner i still have this problems....on linux i have no problem and it runs pretty well for days so if you can...
please compile a version for ubuntu or give source so we can compile it. ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: psk5000 on April 12, 2016, 07:54:22 PM
qtminer = 60mh/s
Claymore = 45mh/s


why ?


(i have 4x r7 370 and crimson 15.12)

Read the known issues...

-25% omg


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 08:08:48 PM
qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Did you get 45MH for dual-mining mode?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: tflux99 on April 12, 2016, 08:12:42 PM
trying it now with 3x r7 370 + 1x r9 280x beta 1.1 on ethermine.org


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: psk5000 on April 12, 2016, 08:14:54 PM
trying it now with 3x r7 370 + 1x r9 280x beta 1.1 on ethermine.org

i lost 25% with claymore
(4x r7 370)


qtminer = 60mh/s
Claymore = 45mh/s

why ?

(i have 4x r7 370 and crimson 15.12)

Did you get 45MH for dual-mining mode?

yes

edit : I'm testing now only eth and i have 55 mh/s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: phzi on April 12, 2016, 08:16:29 PM
v1.1:

- Fixed issue with rejected shares for dwarfpool (and for other pools that use similar code).
- Fixed issue with f2pool pool.
- Added "-worker" option.
- "-dcri" option: max value is 500 now.
- Added "Rejected shares" info.

f2pool working now, but --eworker option doesn't have any effect there (all shares show up under the blank worker).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: olajos on April 12, 2016, 08:20:20 PM
Hello Claymore. your miner with nanopool not working. with ethpool.org working well. please fix it,
thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 12, 2016, 08:23:33 PM
hi. I have problem on start
Code:
23:06:21:489 514 GPU #0: name: Tahiti, 3072 MB available, 32 units
23:06:21:489 514 Total cards: 1
23:06:21:489 514 Initializing...
23:06:21:489 514 GPU #0 recognized as Radeon 280X/380X
23:06:21:489 514 POOL version
23:06:21:489 514 b100
23:06:21:489 514 Error loading Data.bin
with 290x also error and others computers.
16gb virtual + mode 1 or mode 0 = :(


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 08:27:19 PM
hi. I have problem on start
Code:
23:06:21:489 514 GPU #0: name: Tahiti, 3072 MB available, 32 units
23:06:21:489 514 Total cards: 1
23:06:21:489 514 Initializing...
23:06:21:489 514 GPU #0 recognized as Radeon 280X/380X
23:06:21:489 514 POOL version
23:06:21:489 514 b100
23:06:21:489 514 Error loading Data.bin
with 290x also error and others computers.
16gb virtual + mode 1 or mode 0 = :(

Make sure you have "Data.bin" file in the same folder with "EthDcrMiner64.exe".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 08:28:51 PM
f2pool working now, but --eworker option doesn't have any effect there (all shares show up under the blank worker).

It does work. Command line:
EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

Stats:
https://www.f2pool.com/eth/0xd69af2a796a737a103f12d2f0bcc563a13900e6f (https://www.f2pool.com/eth/0xd69af2a796a737a103f12d2f0bcc563a13900e6f)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 12, 2016, 08:31:06 PM
before start - file is folder - after error on screen this file auto delete... I am copy again and then miner again delete it
My line
Code:
-epool eth-ru.dwarfpool.com:8008 -ewal 0x***** -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal ****.1 -dpsw x  -dbg 1
need more info in debug file :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 08:35:25 PM
before start - file is folder - after error on screen this file auto delete... I am copy again and then miner again delete it
My line
Code:
-epool eth-ru.dwarfpool.com:8008 -ewal 0x***** -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal ****.1 -dpsw x  -dbg 1

Miner cannot delete "Data.bin" file. Something other removes it. Check your system/software.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 08:36:46 PM
Hello Claymore. your miner with nanopool not working. with ethpool.org working well. please fix it,
thanks

v1.1 does work. Command line:

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

Stats:

http://nanopool.org/account/0xD69af2A796A737A103F12d2f0BCC563a13900E6F (http://nanopool.org/account/0xD69af2A796A737A103F12d2f0BCC563a13900E6F)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: phzi on April 12, 2016, 08:42:44 PM
f2pool working now, but --eworker option doesn't have any effect there (all shares show up under the blank worker).

It does work. Command line:
EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

Stats:
https://www.f2pool.com/eth/0xd69af2a796a737a103f12d2f0bcc563a13900e6f (https://www.f2pool.com/eth/0xd69af2a796a737a103f12d2f0bcc563a13900e6f)

Indeed, you are correct.  Was a stupid mistake on my part.  Apologies for false alarm.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 12, 2016, 08:42:52 PM
before start - file is folder - after error on screen this file auto delete... I am copy again and then miner again delete it
My line
Code:
-epool eth-ru.dwarfpool.com:8008 -ewal 0x***** -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal ****.1 -dpsw x  -dbg 1

Miner cannot delete "Data.bin" file. Something other removes it. Check your system/software.
lol :) I forgot. My program delete *.bin files before to start miners :)))) sorry, my mistake ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: tflux99 on April 12, 2016, 08:46:57 PM
yes i get 62-63 mh/s with 3 r7 370 and one r9 280x in ether mode... its a bit lower than qtminer but iet it run 4 while to see how stable it is


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 08:48:39 PM
yes i get 62-63 mh/s with 3 r7 370 and one r9 280x in ether mode... its a bit lower than qtminer but iet it run 4 while to see how stable it is

Hashrate for 270/370 will be improved soon, check "known issues" section in OP.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: peteycamey on April 12, 2016, 08:59:46 PM
coinotron doesnt work with -eworker

it says auth failed

coinotron uses accountname.workername format.

also coinotron uses integrated wallet adress. we should be able to use the program without requiring to enter -ewal


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 09:09:42 PM
coinotron doesnt work with -eworker

it says auth failed

coinotron uses accountname.workername format.

also coinotron uses integrated wallet adress. we should be able to use the program without requiring to enter -ewal

I will add support for coinotron in next update.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 12, 2016, 09:29:44 PM
I want to try zpool but it has a stratum address and smart parameters for auto exchange DCR to BTC like
Code:
-o stratum+tcp://mine.zpool.ca:5744 -u BITCOIN ADDRESS -p c=BTC,d=8,decred -I 25
i take it from sgminer example

Any chance to implement it, want to try it because of min ping to zpool. I got about 10-15% of rejected from suprnova.

Maybe it's a miner issue, maybe a pool.

Or maybe your miner is working with url as stratum+tcp... ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 09:39:17 PM
I want to try zpool but it has a stratum address and smart parameters for auto exchange DCR to BTC like
Code:
-o stratum+tcp://mine.zpool.ca:5744 -u BITCOIN ADDRESS -p c=BTC,d=8,decred -I 25
i take it from sgminer example

Any chance to implement it, want to try it because of min ping to zpool. I got about 10-15% of rejected from suprnova.

Maybe it's a miner issue, maybe a pool.

Or maybe your miner is working with url as stratum+tcp... ?

Stratum for DCR is not supported yet, but I will add it soon as well.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 12, 2016, 09:41:43 PM
Ok, thanks.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Strannik-74 on April 12, 2016, 09:57:52 PM
v1.1 after a while the pool writes corrupted DAG

http://c2n.me/3wQrT1p.jpg (http://c2n.me/3wQrT1p)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 12, 2016, 10:16:32 PM
v1.1 after a while the pool writes corrupted DAG

http://c2n.me/3wQrT1p.jpg (http://c2n.me/3wQrT1p)

Pool cannot know about DAG state, it just sees a lot of invalid shares. v1.1 shows number of rejected shares, check it. If it is 0, probably pool countes invalid shares from v1.0 that were sent in past.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: adaseb on April 12, 2016, 10:17:46 PM
If you want to use with MININGPOOLHUB you need to add "-eworker" and it should work.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Ikeet on April 13, 2016, 12:42:28 AM
up and running the new version everything is working perfect so far thanks @claymore


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: BitcoinPappi on April 13, 2016, 01:43:04 AM
Future plans for linux?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: adaseb on April 13, 2016, 02:06:40 AM
Future plans for linux?

Probably never, none of his releases ever go for linux.

You need to install Windows.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Subw on April 13, 2016, 02:20:30 AM
+1 for linux


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ronelord on April 13, 2016, 03:25:09 AM
Please add http protocol for ETH for SOLO miners :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: dolinskii on April 13, 2016, 04:35:57 AM
http://c2n.me/3wQrT1p.jpg (http://c2n.me/3wQrT1p)

Thanks to the good work you have done. It will support in new versions of miners coinotron.com pool ???


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: xalen on April 13, 2016, 05:31:48 AM
Hello. I have a problem starting miner.

got this error "Stratum - socket send failed 10038, disconnect ETH:connection lost"

my bat file "EthDcrMiner64.exe -epool http://eth-eu.dwarfpool.com:8008 -ewal 0x83adcd025043aa135f6305d47aa52e1d14706bdf -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal olaf.dcr -dpsw 1"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 13, 2016, 06:08:41 AM
Hello. I have a problem starting miner.

got this error "Stratum - socket send failed 10038, disconnect ETH:connection lost"

my bat file "EthDcrMiner64.exe -epool http://eth-eu.dwarfpool.com:8008 -ewal 0x83adcd025043aa135f6305d47aa52e1d14706bdf -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal olaf.dcr -dpsw 1"
try without http:// in  http://eth-eu.dwarfpool


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: belmax on April 13, 2016, 06:26:13 AM
http://s013.radikal.ru/i325/1604/09/35fe5bbc305ft.jpg (http://radikal.ru/fp/0dc72874c5e34d119694be757ea3ea0c)

What these numbers mean - how are they calculated?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: okg on April 13, 2016, 06:38:26 AM
thanks for an awesome release keep it up!
 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 13, 2016, 06:59:42 AM
http://s013.radikal.ru/i325/1604/09/35fe5bbc305ft.jpg (http://radikal.ru/fp/0dc72874c5e34d119694be757ea3ea0c)

What these numbers mean - how are they calculated?
It is ROPS - Raster Operating Units - you can see in GPU-Z


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: xalen on April 13, 2016, 08:02:26 AM
Hello. I have a problem starting miner.

got this error "Stratum - socket send failed 10038, disconnect ETH:connection lost"

my bat file "EthDcrMiner64.exe -epool http://eth-eu.dwarfpool.com:8008 -ewal 0x83adcd025043aa135f6305d47aa52e1d14706bdf -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal olaf.dcr -dpsw 1"
try without http:// in  http://eth-eu.dwarfpool


Thanks a lot. It helps


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 08:06:13 AM
Supernova is bad pool, use dcr.coinmine.pl:2032

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xce0999a83d1473aa4a8f0f6705bff4c35375eb04 -epsw x -dpool dcr.coinmine.pl:2032 -dwal alevlaslo.1 -dpsw x -dcri 100 -dcrt 10


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 08:09:13 AM
Future plans for linux?

Probably never, none of his releases ever go for linux.

You need to install Windows.

You are not correct, I have Linux version of XMR miner. Probably I will port this miner to Linux, but it will take some time so I'm going to add some important useful features to Windows version firstly.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 08:13:49 AM
Hello Claymore. your miner with nanopool not working. with ethpool.org working well. please fix it,
thanks
i have good work, port 9999 need set and delete "setx" parameters from .bat

http://eth.nanopool.org/account/0xce0999a83d1473aa4a8f0f6705bff4c35375eb04


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: adaseb on April 13, 2016, 08:17:45 AM
Any of you have an issues with this miner where it just shut down your computer?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: thesaltonsea on April 13, 2016, 08:28:54 AM
I have a problem -

ETH: Stratum - Connected
Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) creation failed!
OpenCL error - cannot write big buffer with DAG

Thats on win7/win10 , with 7950/7970 3GB cards , 15.12 drivers and 16gb page file. What i am missing ? Ethminer is mining normally on both machines.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 08:35:47 AM
I have a problem -

ETH: Stratum - Connected
Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) creation failed!
OpenCL error - cannot write big buffer with DAG

Thats on win7/win10 , with 7950/7970 3GB cards , 15.12 drivers and 16gb page file. What i am missing ? Ethminer is mining normally on both machines.

Read OP:
1. Check disc space.
2. remove DAG files and start miner.

I will fix all these issues soon.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 08:42:43 AM
-dcri more than 100 how to put? Need to wait for a new release only?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ekrem on April 13, 2016, 08:45:30 AM
please ADD  -Pools that require "Login.Worker"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Yanakitu Tenatako on April 13, 2016, 08:48:59 AM
Any plans on optimizing mining for nano/fury cards?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Provok on April 13, 2016, 08:52:01 AM
Any of you have an issues with this miner where it just shut down your computer?

This miner make your cards work harder and use more power. Your power unit can be owerloaded and turns off PC.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 08:54:48 AM
Nano: 28.8 eth + 1440 dcr, but if -dcri more than 100 will be set than dcr will be more MH

2600mh dcr if alone


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ldw-com on April 13, 2016, 09:00:10 AM
Nano: 28.8 eth + 1440 dcr, but if -dcri more than 100 will be set than dcr will be more MH

And a lot more power (watt)  8)

version 1.1 has option to got dcri 500 :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 09:05:04 AM
O, thanks :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 09:25:34 AM
v 1.1

R9 Nano Gigabyte

dcri 30 give 27.7 eth + 416 dcr
dcri 85 give 29.7 eth + 1260 dcr
dcri 100 give 28.7 eth + 1440 dcr (most profit today, 6$)
dcri 125 give 25.5 eth + 1600 dcr
dcri 150 give 23 eth + 1720 dcr
dcri 200 give 16.3 eth + 2030 dcr
dcri 500 give 16 eth + 2040 dcr

eth single - 27
dcr single - 2630


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ldw-com on April 13, 2016, 09:37:29 AM
v 1.1

R9 Nano Gigabyte

dcri 85 give 29.7 eth + 1260 dcr
dcri 100 give 28.7 eth + 1440 dcr
dcri 150 give 23 eth + 1720 dcr
dcri 200 give 16.3 eth + 2030 dcr
dcri 250 give 16 eth + 2040 dcr
dcri 300 give 16 eth + 2040 dcr
dcri 400 give 16 eth + 2040 dcr
dcri 500 give 16 eth + 2040 dcr

eth single - 27
dcr single - 2630

Thank you for doing those tests :)

Is there a DCR Single option?

Must have missed that.

Or are you using a different miner for that?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 09:46:47 AM
if -dcrt less 7 than miner do not start on dcr

for single dcr i use cgminer

Calculator for the amount of ETH and DCR anyone would have done, but it is difficult to calculate the optimal ratio


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Filin4eg on April 13, 2016, 10:13:08 AM
1x280x + 18 watt on dual miner
ETH-20.5 mhas DCR-308 mhas


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 13, 2016, 11:05:17 AM
pls change
Code:
- Added "-worker" option.
on the first page and history file to
Code:
-eworker
 ;)
+ can you do total speed and share accepted and rejected deferent colors? :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ekrem on April 13, 2016, 11:41:50 AM
pls change
Code:
- Added "-worker" option.
on the first page and history file to
Code:
-eworker
  ;)

need without wallet adres only user and pass


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 13, 2016, 11:47:31 AM
pls change
Code:
- Added "-worker" option.
on the first page and history file to
Code:
-eworker
  ;)

need without wallet adres only user and pass
I talk about "-worker" and "-Eworker" - because -worker is unknow param


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: PorcoRosso on April 13, 2016, 11:52:00 AM
Claymore, may be you can create ETH+Siacoin miner? Sia working at another blake algo.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 11:52:33 AM
rev 1.1 is not working with 2032 port of coinmine


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 11:58:33 AM
Claymore, may be you can create ETH+Siacoin miner? Sia working at another blake algo.
SIA only solo, is not comfortable. ETX+X11 is good idea.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Liminer on April 13, 2016, 12:03:28 PM
rev 1.1 is not working with 2032 port of coinmine
yes - 1999 is working


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 12:06:01 PM
on 1999 rejects 5%, it's low diff port


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ekrem on April 13, 2016, 12:15:21 PM
rev 1.1 is not working with 2032 port of coinmine
yes - 1999 is working

please paste full comand line  eth.coinmine.pl


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 12:24:48 PM
Another possible fix for cgminer and "unknown-work" is to use the following extra flags: "--no-submit-stale --scan-time 2 --queue 0" on the commandline.

for this miner what is same options?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: dolinskii on April 13, 2016, 12:35:24 PM
how to connect to eth pool on coinotron.com:3344? Wthat command line need in bat?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: thesaltonsea on April 13, 2016, 12:43:15 PM
how to connect to eth pool on coinotron.com:3344? Wthat command line need in bat?
Its not working with cointron, it will work in next version maybe :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 12:44:42 PM
rev 1.1 is not working with 2032 port of coinmine

I need full command line to check it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: kosaet on April 13, 2016, 12:54:22 PM
Hello guys, thanks Claymore for the miner, but i have one question, Is now this miner work with both suprnova pools , because i am mining eth there ?


PS. I read all 10 pages, nothing about eth suprnova, so i suppose that not work ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: markoz on April 13, 2016, 01:21:42 PM
i have started testing the software and i mine eth on nanopool, dcr on suprnova. Everything is ok but on nanopool i see "now" and "6h" hashrate but "reported" are 0. Is that ok?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 01:56:19 PM
I need full command line to check it.

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xce0999a83d1473aa4a8f0f6705bff4c35375eb04 -epsw x -dpool dcr.coinmine.pl:2032 -dwal alevlaslo.1 -dpsw x -dcri 100

on 1999 port 10% bad shares


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 02:20:27 PM
Oh, just wait a some time, and the port 2032 start works!

0 rejects, but failed to connect sometime. What -dcrt optimal for this port?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: tflux99 on April 13, 2016, 02:30:55 PM
on ethermine.org all shares got rejected anybody else the same ??? it worked b4 but now all is rejected didnt change anything...?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Xdragon on April 13, 2016, 03:25:25 PM
If I had 3x 270x + 3x 280x on one rig, is it possible to do "-mode 0" for 3x 280x, and "-mode 1" for 3x 270x at the same time  ;D ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: citronick on April 13, 2016, 03:27:56 PM
+1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: thevictimofuktyranny on April 13, 2016, 03:52:12 PM
Well, done Claymore, working very well on R9 290 overclocked to 1020mhz.

Still, uses Claymore GPU Control software for overclocking my GPU, from 2 years ago :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: nanomo on April 13, 2016, 05:08:22 PM
Why so many rejected?

DCR - Total Speed: 1084.617 Mh/s, Total Shares: 691, Rejected: 114
DCR: GPU0 272.606 Mh/s, GPU1 266.236 Mh/s, GPU2 273.063 Mh/s, GPU3 272.712 Mh/s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: alevlaslo on April 13, 2016, 05:50:33 PM
use hi diff port or another pool


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: restless on April 13, 2016, 05:52:41 PM
If I had 3x 270x + 3x 280x on one rig, is it possible to do "-mode 0" for 3x 280x, and "-mode 1" for 3x 270x at the same time  ;D ;D
It should be possible, assuming 270x are indexed as  0,1,2 and 280x are 3,4,5
for 3x270x use:
-di 012 -mode 0 -dir "c:\DAGs\270x"
for 280x use:
-di 345 -mode 1 -dir "c:\DAGs\280x"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: BitcoinPappi on April 13, 2016, 06:34:45 PM
Future plans for linux?

Probably never, none of his releases ever go for linux.

You need to install Windows.

You are not correct, I have Linux version of XMR miner. Probably I will port this miner to Linux, but it will take some time so I'm going to add some important useful features to Windows version firstly.

Sounds good. Thanks.  Using the Decred calculator( http://decred-calc.cryptohub.info) and the GPU hash rates from the list.  Is it me or Decred according to the calculator will double profits from mining when combined with ETH?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 13, 2016, 08:10:47 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 08:16:22 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: domingo62 on April 13, 2016, 08:21:09 PM
Is it possible to mine EXP with this? I'm trying in differents ways but seems it's not possible.

Cannot create big DAG.

Claymore, did you lock this miner to eth only?



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 13, 2016, 08:39:23 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).  


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: restless on April 13, 2016, 08:43:39 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
I think the question was, if one can have different version installed, but simply copy opencl files from 15.12 into miner directory


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 08:44:03 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).  

I did not check it yet. Why do you want to mine ETH solo?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 08:44:37 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.
I think the question was, if one can have different version installed, but simply copy opencl files from 15.12 into miner directory

Well, you can try, it may work. I have not tried that.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: restless on April 13, 2016, 08:51:52 PM
So far I tried your miner on 2 different than  versions - 15.7 , 16.3.1 - it always works :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 13, 2016, 08:53:58 PM
Claymore, is that trick works with different opencls like in XPM miners ? I tried from 16.4.1 and it crushed. Maybe it's not supported or even not working in ETH-DCR miners ?

I compile OpenCL kernels for 15.12, binaries may fail in 13.x, 14x, 16.x. So in general I need to compile it for every major Catalyst version, right now I decoded to support 15.x only, though I can create several sub-versions if it will be useful for a lot of people.

Understood. Can you tell about time of release solo version? I guess it's very useful for some part of people like me)).  

I did not check it yet. Why do you want to mine ETH solo?

Cause i don't like pools, because of stales, rejects bad ping and etc. I was mining in solo with ethminer about 2 months and it's very well. I like your solo versions of XPM miners. Just like solo)) Maybe that's an answer.  

Forgot to add ddos, steal, hack pools.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: kosaet on April 13, 2016, 09:16:39 PM
so, how much must do on decred one 280x ?, i got 300-350 mh/s ?

PS. Never mine this shit decred, normal speed for one 280x is 1200 , one my friend told me (hero member, close to legendary, real my friend). Of course, this shit have fee, soo, i suggest you to stop all this
.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: xalen on April 13, 2016, 09:21:23 PM
Hello. I have a question.

When I mine only ETH I got approx 20 MHs and decred near 1000 MHs (r9 380), with dual-miner I got 18+270, is that normal or I made something wrong?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: sakuleo on April 13, 2016, 09:28:36 PM
test 3 riigs and 3 rigs compre this

drivers 15.2 7970 = 21.300 eth 310 dcr
drivers 16.4.1 hf = 21 780 eth 322 dcr

only eth 22.100

better hash no crashes so far (36 hs) whit new drivers.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: ariliz on April 13, 2016, 09:30:16 PM
Hello. I have a question.

When I mine only ETH I got approx 20 MHs and decred near 1000 MHs (r9 380), with dual-miner I got 18+270, is that normal or I made something wrong?

and I have the same problem


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Maxikosw on April 13, 2016, 09:47:38 PM
I have 2 powerfull cards on rig and 2 low end.
So if i mine ETH + DEC on one miner window with better cards i get 2% fee and low end cards own miner window 1% fee...
So 3% fee on 99mh ETH and 880mh DEC. So there is no point to mine on this miner...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: kosaet on April 13, 2016, 09:50:16 PM
Guys, in crpyto world havent nothing free, i klnow more from you about this :). Dont waste power for the others :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: Claymore on April 13, 2016, 09:59:27 PM
I have 2 powerfull cards on rig and 2 low end.
So if i mine ETH + DEC on one miner window with better cards i get 2% fee and low end cards own miner window 1% fee...
So 3% fee on 99mh ETH and 880mh DEC. So there is no point to mine on this miner...

3% fee - you have serious problems with arithmetics. Assume you have 6 cards and open 6 miner windows - will you calculate fee as 6%? :)
Anyway, don't use my miner if you think that you earn less with it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: revelacaogr on April 13, 2016, 10:04:24 PM
very good miner...
tnks for all your efford!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 13, 2016, 10:04:56 PM
After install 15.12 where was 14.9 and working well it's show the error and do not mine.

Code:
Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) is ok.
Need to check next DAG file (epoch #45) in background, starting...
 solutions.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.
DAG file (epoch #45) is ok.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: MacT on April 13, 2016, 10:14:57 PM
After install 15.12 where was 14.9 and working well it's show the error and do not mine.

Code:
Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) is ok.
Need to check next DAG file (epoch #45) in background, starting...
 solutions.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.
DAG file (epoch #45) is ok.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.

 Hey qqqq- did you set your virtual memory to 16gb? Not doing it will cause that.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: qqqq on April 13, 2016, 10:23:44 PM
After install 15.12 where was 14.9 and working well it's show the error and do not mine.

Code:
Need to check DAG file (epoch #44), starting...
DAG file (epoch #44) is ok.
Need to check next DAG file (epoch #45) in background, starting...
 solutions.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.
DAG file (epoch #45) is ok.
OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.

 Hey qqqq- did you set your virtual memory to 16gb? Not doing it will cause that.

Yes. And i got PC where only 2GB is set for BSOD info on Win 10 and it works anyway.

And again, it mined on 14.9 recently. I just did clean uninstall with amdcleanuputility and install 15.12!  


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.1
Post by: psk5000 on April 13, 2016, 10:44:31 PM
The update for 270/370 come when?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 13, 2016, 11:05:48 PM
v1.2:

- Added "-ethi" option.
- Added coloring.
- "-mode" option now can be set for every card individually.
- "-dcri" option now can be set for every card individually.
- Added "-allpools" option.


Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sakuleo on April 13, 2016, 11:34:45 PM
how impact ethi on hash to mine eth only?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 14, 2016, 12:11:00 AM
Thanks for the updates man!  I get 33mhs on a 390 and about 480kh/s dual mine.  I dont really see an improvement over just eth mining, i am overclocked a lot though, but the added dual mining is nice I guess.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: qqqq on April 14, 2016, 12:19:47 AM
Back to 14.9 solve my issue.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: CrazyRussian on April 14, 2016, 01:18:01 AM
v1.2:

- Added "-ethi" option.
- Added coloring.
- "-mode" option now can be set for every card individually.
- "-dcri" option now can be set for every card individually.
- Added "-allpools" option.


Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.


Pool ETH Nicehash planned support ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: citronick on April 14, 2016, 01:34:56 AM
claymore - for decred, have you tested on zpool?

any plans to do have failover feature for ETH?

I plan to do ethermine (main pool) and ethpool (backup) and do DCR at zpool.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 14, 2016, 02:22:37 AM
v1.2:

- Added "-ethi" option.
- Added coloring.
- "-mode" option now can be set for every card individually.
- "-dcri" option now can be set for every card individually.
- Added "-allpools" option.


Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.


Pool ETH Nicehash planned support ?

Nicehash pays a lot less methinks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: nrg_wolf on April 14, 2016, 02:25:49 AM
miner works fine on windows 8.1 with 16.2 drivers... go figure lol. X2 280x and 1 270 and 1 270x does 62Mhs on eth and 600odd on dcr. didnt set anything just put in pool address's and it worked fine.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: xalen on April 14, 2016, 04:45:18 AM
I have radeon R9 380 but miner recognize card as redeon 285. Is that normal?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 05:02:16 AM
Pool ETH Nicehash planned support ?

Does it support Stratum? I'm not going to support pools that support HTTP only, it's not a good idea to mine there.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 05:02:54 AM
I have radeon R9 380 but miner recognize card as redeon 285. Is that normal?

It's ok.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: gris on April 14, 2016, 05:17:25 AM
ethermine.org
It can be supported? .Connect. but no data in the statistics


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Chugumoto on April 14, 2016, 05:34:15 AM
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
coinotron uses this stratum proxy
may be useful and will accelerate the development...
https://github.com/Coinotron/eth-stratum-mining-proxy


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dominuspro on April 14, 2016, 05:43:48 AM
I let the first version of the miner run on ethermine. After 24h the pool reported 24h avg hashrate was above 31Mh. Then lowering to under 28...
Just variance or something else?

I just stopped the miner and re-run the latest version 1.2. We will see :)

http://s24.postimg.org/wfc4mkhlh/390_dual.png


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 14, 2016, 05:48:39 AM
ethermine.org
It can be supported? .Connect. but no data in the statistics

 just do it this way in your .bat loader, after the usual setx's


EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal PutYourCoinAdressHere -eworker PutArigNameHere -epsw x -esm 1

not sure if you need the -epsw x but it works for me with it. Change the us1 server part if thats not the one you use. The -esm 1 is the part that
unlocks statistics by putting you in qtminer mode, though it doesnt seem to do that for me but it did for the guy in the post above.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sakuleo on April 14, 2016, 06:36:57 AM
version 1.2 after the fee mining they only giveme rejected eth shares. back to 1.1v


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: ekrem on April 14, 2016, 06:39:56 AM
v1.2:


- Added "-allpools" option.



what need I write as an option?

eth.coinmine.pl


Code:
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Liminer on April 14, 2016, 06:58:09 AM
v1.2:
- Added coloring.
thx  ;)
+ When folder doesn't exist  
Code:
-dir D:\DAG_ETH
- pls add auto create folder


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: gris on April 14, 2016, 07:21:35 AM
ethermine.org
It can be supported? .Connect. but no data in the statistics

 just do it this way in your .bat loader, after the usual setx's


EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal PutYourCoinAdressHere -eworker PutArigNameHere -epsw x -esm 1

not sure if you need the -epsw x but it works for me with it. Change the us1 server part if thats not the one you use. The -esm 1 is the part that
unlocks statistics by putting you in qtminer mode, though it doesnt seem to do that for me but it did for the guy in the post above.

I have the same file.
However, no statistics display my work. Miner shows 20 mgh. The statistics shows the current 8 mgh. The average speed on the worker does not appear at all.
Only if I tried qtminer mode



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: olajos on April 14, 2016, 07:39:27 AM
v1.2:

- Added "-ethi" option.
- Added coloring.
- "-mode" option now can be set for every card individually.
- "-dcri" option now can be set for every card individually.
- Added "-allpools" option.


Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.

thanks

if i mine only ether on my 380 card it will do 20mh, if i dual mine on intensity 30 drops to 18 mh. on 290x 28mh on eth only and 28 on dual :)
is it a bug or a card is weak?
and one more thing. i have 2x 380 and 1x290. the two 380 is mining on different hashrate....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: feeleep on April 14, 2016, 07:55:48 AM
v1.2:


- Added "-allpools" option.



what need I write as an option?

eth.coinmine.pl


Code:
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

Hi - you use qtminer mode so change the port to 4001

feeleep


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: hepilord on April 14, 2016, 08:51:02 AM
can i mine EXP i DCR at the same time?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: chup on April 14, 2016, 08:55:42 AM
Option for computer restart when seek GPU found would be very useful. Seek GPU could be determined if 3 (or more) consecutive hashrates of GPU are identical.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: asidamani on April 14, 2016, 09:17:36 AM
I have 4x7990, connecting to the eu1.ethpool.org, the invalid share rate is about 10%. With the 2x7990+r9 390, the invalid rate is 1% or lower.

Any reason for that? Catalyst 15.11+ 15.12 opecl.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 14, 2016, 09:32:32 AM
v1.2:


if i mine only ether on my 380 card it will do 20mh, if i dual mine on intensity 30 drops to 18 mh. on 290x 28mh on eth only and 28 on dual :)
is it a bug or a card is weak?
and one more thing. i have 2x 380 and 1x290. the two 380 is mining on different hashrate....


 My 4 identical plain 380 cards report ~ 20.7, 20.7, 20.4, and then 21.4  all at 1150/1450/-50mV 805 Watts


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 09:43:32 AM
How does the temperature management works? what happens when the set temp is reached?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: DarkRavenGamer on April 14, 2016, 09:54:06 AM
Please add support for solo mining.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Strannik-74 on April 14, 2016, 10:04:35 AM
can i mine EXP i DCR at the same time?

You can, no problem = )
Is hard to do 2 clicks and try?

How does the temperature management works? what happens when the set temp is reached?

Throttling


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 10:14:17 AM
Thanks, is there support for global and local work?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Xdragon on April 14, 2016, 10:18:26 AM
v1.2:


- Added "-allpools" option.



what need I write as an option?

eth.coinmine.pl


Code:
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

Hi - you use qtminer mode so change the port to 4001

feeleep

coinmine.pl not working with this miner nor with "-esm 0 -allpools 1" nor with "-esm 1 -allpools 1" option. Also currently standalone Qtminer is not working too, I got message - "waiting for work package". ethminer + stratum is working.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: hepilord on April 14, 2016, 10:21:25 AM
can i mine EXP i DCR at the same time?

You can, no problem = )
Is hard to do 2 clicks and try?

How does the temperature management works? what happens when the set temp is reached?

Throttling


I tryed mine EXP on dwarfpool.com and i have this: OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible
 solutions.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 10:41:33 AM
coinmine.pl not working with this miner nor with "-esm 0 -allpools 1" nor with "-esm 1 -allpools 1" option. Also currently standalone Qtminer is not working too, I got message - "waiting for work package". ethminer + stratum is working.

coinmine uses another stratum implementation, it works with "mining_proxy.exe", not with "eth-proxy.exe". Same for coinotron and suprnova and I'm working on it:
https://bitcointalk.org/index.php?topic=1433925.220
In coinmine help section I see they support qtminer so you could use it, but it seems they broke its support, I cannot make it work with qtminer.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 10:47:41 AM
@Claymore ,  is there support for global and local work?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Bojcha on April 14, 2016, 10:53:51 AM
what is farm-reckeck value?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 10:53:58 AM
I let the first version of the miner run on ethermine. After 24h the pool reported 24h avg hashrate was above 31Mh. Then lowering to under 28...
Just variance or something else?
I just stopped the miner and re-run the latest version 1.2. We will see :)

I tested ethpool.org with qtminer for about a week, and then with my miner. So perhaps it's a good idea if you start qtminer on same pool for a couple of days and then compare invalid shares rate and hashrate that pool shows. I got about +4% more hashrate on pool with my miner and only 0.1-0.2% invalid shares instead of about 2-3% for qtminer. But anyway this pool shows 3-4% less hashrate that my miner shows, perhaps it is because pools cannot reach 100% efficiency on Ethereum network because of a very short block time period.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 10:55:14 AM
@Claymore ,  is there support for global and local work?

global work is related to "-ethi" option. Local work cannot be changed.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 10:57:41 AM
@Claymore ,  is there support for global and local work?

global work is related to "-ethi" option. Local work cannot be changed.

Thanks, one more question. The cclock and mclock are not working on my 7950 mining only ether. Is that normal?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 10:58:18 AM
what is farm-reckeck value?

This option is related for HTTP protocol, Stratum gets new job immediately as soon as pool got it for miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: ekrem on April 14, 2016, 11:00:06 AM
v1.2:


- Added "-allpools" option.



what need I write as an option?

eth.coinmine.pl


Code:
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

Hi - you use qtminer mode so change the port to 4001

feeleep

i already test all port  4000, 4001  3000 not work  eth.coinmine.pl with this minner


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 11:01:09 AM
@Claymore ,  is there support for global and local work?

global work is related to "-ethi" option. Local work cannot be changed.

Thanks, one more question. The cclock and mclock are not working on my 7950 mining only ether. Is that normal?

I don't have 7xxx cards here to test. I use ATI ADL Overdrive APIs v5 and v6, if your card uses <v5 then it will not work.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: ldw-com on April 14, 2016, 11:07:06 AM
just had some tests with ethi. Doesn't do anything (if i up it.) it only works when lowering.

However when raising dcri, hashrate of eth goes up as well. Kind of weird.

I would be a very happy person if i could raise eth intensity with an effective difference in eth hashrate.

Like i said, the only way i can raise my eth hashrate is when i raise dcri. (Which has no point when mining on mode 1)..

Any suggestions for that Claymore?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 11:12:30 AM
just had some tests with ethi. Doesn't do anything (if i up it.) it only works when lowering.

However when raising dcri, hashrate of eth goes up as well. Kind of weird.

I would be a very happy person if i could raise eth intensity with an effective difference in eth hashrate.

Like i said, the only way i can raise my eth hashrate is when i raise dcri. (Which has no point when mining on mode 1)..

Any suggestions for that Claymore?

Do you have better hashrate for mode 0 than for mode 1? What card do you have? And what hashrates for both modes?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: BogdanEraser on April 14, 2016, 11:31:12 AM
-cclock and -mclock does not work at all (2*270x + 1*290, drv.15.7.1). All clocks can be setted through sgminer (1120 for my 270x and 1080 for 290), but then, after starting Claymore's Dual Ethereum+Decred GPU Miner, clock drops for 290 to 990.. wierd.. also, when Claymore's Dual Ethereum+Decred GPU Miner is working, MS AB can only set fan %


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: qqqq on April 14, 2016, 11:58:35 AM
Claymore, do you have any experience of implementing JSON API ? Is that possible to include it in future releases ? I like monitoring all of my farms like in cgminer.

And you are not answer me about equal time release of solo version.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Charloz24 on April 14, 2016, 12:01:43 PM

Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.


Can't wait to test this future version, I have a couple 370 here....  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: ldw-com on April 14, 2016, 12:37:43 PM
just had some tests with ethi. Doesn't do anything (if i up it.) it only works when lowering.

However when raising dcri, hashrate of eth goes up as well. Kind of weird.

I would be a very happy person if i could raise eth intensity with an effective difference in eth hashrate.

Like i said, the only way i can raise my eth hashrate is when i raise dcri. (Which has no point when mining on mode 1)..

Any suggestions for that Claymore?

Do you have better hashrate for mode 0 than for mode 1? What card do you have? And what hashrates for both modes?

Claymore,

Yes i do have better hashrate for mode 0 than for mode 1.

That's why i said it was weird :p

R9 Nano's.

170Mh Eth and 5Ghz Decred -dcri 60

160Mh(barely) Eth solo (same clocks)

I can go to 180 Eth and 8Ghz Decred, also with -dcri 60 but higher clocks.


Anyhow, it's lower when solo mining Eth. So i'm kind of forced to mine both.. Although i don't want to because it eats a lot more energy :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Ikeet on April 14, 2016, 12:45:31 PM
i keep getting about 8-10% invalid shares from DCR anyone else having this problem?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 12:46:20 PM
Claymore,
Yes i do have better hashrate for mode 0 than for mode 1.
That's why i said it was weird :p
R9 Nano's.
170Mh Eth and 5Ghz Decred -dcri 60
160Mh(barely) Eth solo (same clocks)
I can go to 180 Eth and 8Ghz Decred, also with -dcri 60 but higher clocks.
Anyhow, it's lower when solo mining Eth. So i'm kind of forced to mine both.. Although i don't want to because it eats a lot more energy :)

Ok I have Nano card, so I will check/fix it soon.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: kcanup on April 14, 2016, 12:48:22 PM
Although i don't want to because it eats a lot more energy :)

Lot more energy means how much % difference you find while mining with dual miner?

Also, anybody tested this dual miner on 390x cards? If yes, im interested to know the results.

Thank you Claymore! This must be an awesome tool for us miner!!  :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: shubell on April 14, 2016, 01:08:01 PM
Here is a little table i made for my r9 280x

dcri   eth   dcr
10   20,882   104
20   20,65   206
30   19,86   297
40   19,03   380
50   18,16   454
60   17,069   512
70   16,278   569
80   15,49   619
90   14,69   661
100   14,052   702
200   9,21   920
300   6,9   1030
400   5,42   1094
500   4,55   1137


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: agkbill on April 14, 2016, 01:32:33 PM

Hi,

I currently trying out the miner at ethermine.org looks OK I it looks like I got an increase in performance on my two R9 290 cards.

However I noticed that no "reported hashrate" are reported, that is suppose to be the current hash rate of the miner.

Is there a way to assign a rig name? Now on ethermine.org Id just say "default".

Overall very happy about the miner, great job Claymore!

All the best,
Christer


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 01:36:38 PM
@Claymore

4x380

original qtminer: 81.7
Claymore's miner qtminer mode: 82.5 (0.9% gain) - only ethereum mining
same speed for eth-proxy mode

-cclock nad -mclock not working


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: th00ber on April 14, 2016, 01:41:04 PM
Based on your results.
R9 280X on ETH only is @2.90$/d right now

Best combination give 3.23$/d, so +11.3% theorically.
But the miner has 1% fee + DCR share are around 10% invalid right now.

So real best combo could be 3.16$/d and +9% income ... but how many watt more ? Because this dual miner stress more the cards (heat + watt).

dcriETH MH/sDCR Mh/sETH $/dDCR $/dTOTAL
1020,8821042.860.173.03
2020,652062.830.343.16
3019,862972.720.483.20
4019,033802.610.623.23
5018,164542.490.743.23
6017,0695122.230.833.17
7016,2785692.120.933.16
8014,696192.011.013.13
9014,0526611.931.083.09
1009,217021.261.143.07


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: ldw-com on April 14, 2016, 03:02:18 PM
Claymore,
Yes i do have better hashrate for mode 0 than for mode 1.
That's why i said it was weird :p
R9 Nano's.
170Mh Eth and 5Ghz Decred -dcri 60
160Mh(barely) Eth solo (same clocks)
I can go to 180 Eth and 8Ghz Decred, also with -dcri 60 but higher clocks.
Anyhow, it's lower when solo mining Eth. So i'm kind of forced to mine both.. Although i don't want to because it eats a lot more energy :)

Ok I have Nano card, so I will check/fix it soon.

Okay, thank you :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: supersonic on April 14, 2016, 03:05:20 PM

Hi,

I currently trying out the miner at ethermine.org looks OK I it looks like I got an increase in performance on my two R9 290 cards.

However I noticed that no "reported hashrate" are reported, that is suppose to be the current hash rate of the miner.

Is there a way to assign a rig name? Now on ethermine.org Id just say "default".

Overall very happy about the miner, great job Claymore!

All the best,
Christer
Same here about reported hashrate but it is showing effective hashrate, im using R9 280x vapors


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 03:13:11 PM

Hi,

I currently trying out the miner at ethermine.org looks OK I it looks like I got an increase in performance on my two R9 290 cards.

However I noticed that no "reported hashrate" are reported, that is suppose to be the current hash rate of the miner.

Is there a way to assign a rig name? Now on ethermine.org Id just say "default".

Overall very happy about the miner, great job Claymore!

All the best,
Christer
Same here about reported hashrate but it is showing effective hashrate, im using R9 280x vapors

Guys, read pool's help, add dot and rig name after address, from their help page:
...
0x4bb96091ee9d802ed039c4d1a5f6216f90f81b01.rig1
...
To enable shares statistics you should enable qtminer mode "-esm 1" and wait some time until pool displays new stats.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sakuleo on April 14, 2016, 04:19:21 PM
i keep getting about 8-10% invalid shares from DCR anyone else having this problem?

chanfge te difficulty port (i use 8 and no rejected shares come out)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 04:19:56 PM
@Claymore I got a few more questions.

1. Do I need to compare the console hashrate for these 3-5% ro they will affect  in the pool? Because in the console I'm getting 0.8% increase which is less then your fee.
2. In qtminer mode for several hours I didt get any invalid shares which is odd. Is these because of the better miner or its because you check them locally and that way the miner is not sending invalid shares.
3. The cclock and mclock is is not working neither on 7950 or 380(rebranded 285 tonga), is there any way to be fixed? I'm using this command:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal wallet.name -epsw x -esm 1 -mode 1 -cclock 1050 -mclock 1500

I really like the other features of the miner and If these can be fixed I will be happy to move all my rigs there.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: alevlaslo on April 14, 2016, 04:28:51 PM
I get 295x2 today, 3 cores i have now, how set dcri for Nano to 95 and for 295x2 to 30 ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 04:28:56 PM
@Claymore I got a few more questions.

1. Do I need to compare the console hashrate for these 3-5% ro they will affect  in the pool? Because in the console I'm getting 0.8% increase which is less then your fee.
2. In qtminer mode for several hours I didt get any invalid shares which is odd. Is these because of the better miner or its because you check them locally and that way the miner is not sending invalid shares.
3. The cclock and mclock is is not working neither on 7950 or 380(rebranded 285 tonga), is there any way to be fixed? I'm using this command:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal wallet.name -epsw x -esm 1 -mode 1 -cclock 1050 -mclock 1500

I really like the other features of the miner and If these can be fixed I will be happy to move all my rigs there.

1. Compare hashrates on pool. There is no way to improve hasrate in miner a lot because of hardware limitations, but I made my miner more efficient than official miner and qtminer by improving other stuff.
2. Currently I don't check shares locally (it can be a problem if you overclocked GPUs too much), miner sends all shares, but does it faster than qtminer. qtminer checks shares locally, however it has much more invalid shares on pool. So you can see the quality of my miner.
3. I will check it soon.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: psk5000 on April 14, 2016, 07:42:29 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: kanoptx on April 14, 2016, 07:45:26 PM
Quick question: in order to mine eth with ethminer one needs to download the blockchain with geth. so does geth still need to run with this miner correct?
what about decred? what do i need to download the decred's blockchain? thank you.

edit: would it also be okay to use claymore double miner while also using decred's command line wallet to mine POS. thank you.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Chugumoto on April 14, 2016, 08:05:51 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?
370=7850


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: agkbill on April 14, 2016, 08:07:40 PM

Hi,

I currently trying out the miner at ethermine.org looks OK I it looks like I got an increase in performance on my two R9 290 cards.

However I noticed that no "reported hashrate" are reported, that is suppose to be the current hash rate of the miner.

Is there a way to assign a rig name? Now on ethermine.org Id just say "default".

Overall very happy about the miner, great job Claymore!

All the best,
Christer
Same here about reported hashrate but it is showing effective hashrate, im using R9 280x vapors

Guys, read pool's help, add dot and rig name after address, from their help page:
...
0x4bb96091ee9d802ed039c4d1a5f6216f90f81b01.rig1
...
To enable shares statistics you should enable qtminer mode "-esm 1" and wait some time until pool displays new stats.



Thank you, works to add the name with
...
0x4bb96091ee9d802ed039c4d1a5f6216f90f81b01.rig1
...
maybe "-eworker" would have done it as well.

But at http://ethermine.org/ "-esm 1" do not seems to work, miner have been running around 1 houre now and nothing reported in as "Reported Hashrate".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: kanoptx on April 14, 2016, 08:10:08 PM
Quick question: in order to mine eth with ethminer one needs to download the blockchain with geth. so does geth still need to run with this miner correct?
what about decred? what do i need to download the decred's blockchain? thank you.

edit: would it also be okay to use claymore double miner while also using decred's command line wallet to mine POS. thank you.

Maybe I just need to run the decred wallet, right?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 08:16:32 PM
But at http://ethermine.org/ "-esm 1" do not seems to work, miner have been running around 1 houre now and nothing reported in as "Reported Hashrate".

Thats completely normal neither original qtmienr or clymore' qtminer mode reporting hashrate. Reporting hashrate is only active with etth-proxy


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: psk5000 on April 14, 2016, 08:21:00 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?
370=7850

my 7850 have only 1GB


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: kanoptx on April 14, 2016, 08:23:42 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?
370=7850

my 7850 have only 1GB

I think you need 2GB to mine eth. is that why you want to set only dcr for 7850?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dannygroove on April 14, 2016, 09:11:44 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 09:22:18 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: omnik on April 14, 2016, 09:35:07 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).



So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: psk5000 on April 14, 2016, 09:42:23 PM
and for decred only ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 09:43:14 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).



So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

More like
-mode 0,1,1

meaning: -mode 0(Eth+Dcr on GPU 0),1(Eth on GPU1),1(Eth on GPU2)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 09:47:17 PM
By default, for all cards -mode is 0. So you need to specify only cards with mode 1. So it always will look like -mode 1-012.
Here "1" means set mode "1" for cards "012", i.e. for first, second and third cards. No commas, just cards numbers like in "-di" parameter.
Examples:
Want to enable mode "1" for first card? Use "-mode 1-0".
Want to enable mode "1" for second card? Use "-mode 1-1".
Want to enable mode "1" for third card? Use "-mode 1-2".
Want to enable mode "1" for second and third card? Use "-mode 1-12".
Want to enable mode "1" for first and third card? Use "-mode 1-02".
All other (non-specified) cards will use mode 0.

I really don't know how to explain it more.
There is no way to mine Decred only. Either eth+dcr (mode 0), or eth (mode 1).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: psk5000 on April 14, 2016, 09:49:10 PM
By default, for all cards -mode is 0. So you need to specify only cards with mode 1. So it always will look like -mode 1-012.
Here "1" means set mode "1" for cards "012", i.e. for first, second and third cards. No commas, just cards numbers like in "-di" parameter.
Examples:
Want to enable mode "1" for first card? Use "-mode 1-0".
Want to enable mode "1" for second card? Use "-mode 1-1".
Want to enable mode "1" for third card? Use "-mode 1-2".
Want to enable mode "1" for second and third card? Use "-mode 1-12".
Want to enable mode "1" for first and third card? Use "-mode 1-02".
All other (non-specified) cards will use mode 0.

I really don't know how to explain it more.

ok and if the card can't mine eth but only dcr ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 14, 2016, 09:49:53 PM
By default, for all cards -mode is 0. So you need to specify only cards with mode 1. So it always will look like -mode 1-012.
Here "1" means set mode "1" for cards "012", i.e. for first, second and third cards. No commas, just cards numbers like in "-di" parameter.
Examples:
Want to enable mode "1" for first card? Use "-mode 1-0".
Want to enable mode "1" for second card? Use "-mode 1-1".
Want to enable mode "1" for third card? Use "-mode 1-2".
Want to enable mode "1" for second and third card? Use "-mode 1-12".
Want to enable mode "1" for first and third card? Use "-mode 1-02".
All other (non-specified) cards will use mode 0.

I really don't know how to explain it more.

ok and if the card can't mine eth but only dcr ?

You have to use some different miner if you want to mine DCR only.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: omnik on April 14, 2016, 09:51:31 PM
My experience:
1x Power Color R9 280X @ 950/1250
2x Sapphire R9 279 @ 920/1400

Genoil v1.0.3 - 47MH/s stable hash. Dwarfpool via Proxy.
Claymore v1.2 (ETH+DCR on 280x, 2x270 ETH only, DCR intensity 14) - 45.2MH/s ETH, 137MH/s DCR. Dwarfpool Stratum and Suprnova DCR pools.

137MH/s on DCR according to calc brings about 0.14 DCR/day or 0.2USD.

My conclusion is not seeing a point of using Claymore miner in this setup, considering lost hash on ETH and dev fee (which I have absolutely nothing against).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dannygroove on April 14, 2016, 09:55:11 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).



So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

As I understand it now, there is no need to specify if a card will do -mode 0. Only specify which cards will be doing -mode 1 the way Claymore just explained. So in your case -mode 1-12, correct.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: omnik on April 14, 2016, 09:57:42 PM
i have 4x r7 370 and 1x 7850

how i can mine dual mode for 4x 370 and only dcr for 7850 ?

"-mode" option now can be set for every card individually.

Ex: -mode 0,0,0,0,1

No! Read OP:

-mode   Select mining mode:
   "-mode 0" (default) means Ethereum+Decred mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).



So if I understand correctly... I have 3 cards in my rig:
GPU 0: 280X
GPU 1: 270
GPU 2: 270

If I want to mine ETH+DCR only with GPU 0 and ETH with all 3 cards my bat should be:

-mode 1-12 -mode 0-0

Correct?

Thanks!

More like
-mode 0,1,1

meaning: -mode 0(Eth+Dcr on GPU 0),1(Eth on GPU1),1(Eth on GPU2)

It doesn't work... all 3 cards mine ETH and DCR:

http://s24.postimg.org/3qcsyf2t1/Untitled.png

My option actualy work:
-mode 1-12 -mode 0-0


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dannygroove on April 14, 2016, 10:00:06 PM
It doesn't work... all 3 cards mine ETH and DCR:

http://s24.postimg.org/3qcsyf2t1/Untitled.png

My option actualy work:
-mode 1-12 -mode 0-0

You are right, I misread the OP.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 10:45:41 PM
My experience:
1x Power Color R9 280X @ 950/1250
2x Sapphire R9 279 @ 920/1400

Genoil v1.0.3 - 47MH/s stable hash. Dwarfpool via Proxy.
Claymore v1.2 (ETH+DCR on 280x, 2x270 ETH only, DCR intensity 14) - 45.2MH/s ETH, 137MH/s DCR. Dwarfpool Stratum and Suprnova DCR pools.

137MH/s on DCR according to calc brings about 0.14 DCR/day or 0.2USD.

My conclusion is not seeing a point of using Claymore miner in this setup, considering lost hash on ETH and dev fee (which I have absolutely nothing against).

I got about your results but Claymore said to me on the last page that i have to compare the pool results not the console reading. Right now I started two identical rigs in the very same time one with qtminer and one with claymore's miner  on qtminer mode.

The bottom one is the clyamore's
http://vgy.me/6qg9tn.png
I need at least 24 hours to make any conclusion but it looks promising now.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dannygroove on April 14, 2016, 11:02:52 PM
I got about your results but Claymore said to me on the last page that i have to compare the pool results not the console reading. Right now I started two identical rigs in the very same time one with qtminer and one with claymore's miner  on qtminer mode.

The bottom one is the clyamore's
http://vgy.me/6qg9tn.png
I need at least 24 hours to make any conclusion but it looks promising now.

Can you keep us posted on your 24H results?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 14, 2016, 11:28:18 PM
I got about your results but Claymore said to me on the last page that i have to compare the pool results not the console reading. Right now I started two identical rigs in the very same time one with qtminer and one with claymore's miner  on qtminer mode.

The bottom one is the clyamore's
http://vgy.me/6qg9tn.png
I need at least 24 hours to make any conclusion but it looks promising now.

Can you keep us posted on your 24H results?

Ok, about 5 hours now:

https://vgy.me/lgE0LI.png


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dannygroove on April 14, 2016, 11:52:21 PM
I got about your results but Claymore said to me on the last page that i have to compare the pool results not the console reading. Right now I started two identical rigs in the very same time one with qtminer and one with claymore's miner  on qtminer mode.

The bottom one is the clyamore's
http://vgy.me/6qg9tn.png
I need at least 24 hours to make any conclusion but it looks promising now.

Can you keep us posted on your 24H results?

Ok, about 5 hours now:

https://vgy.me/lgE0LI.png

10% + and holding


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 15, 2016, 12:20:16 AM
Ok, about 5 hours now:

https://vgy.me/lgE0LI.png

10% + and holding

I have observed similar results over 24hr+.  Invalid shares have dropped to nearly 0, where 1-3% was typical with ethminer (any variant).  And, total submitted shares have definitely increased.

Watching GPU usage %, with claymore they stay at 100% almost all the time.  With genoil or web3 ethminer, there are constant dips to 0%.

Not to mention this miner seems way more stable and consistent.

I do get stupidly high DCR rejects tho (10%+), no matter what difficulty I use.  Hoping the next version with stratum support will improve that. I've tried every pool and they all seem the same. Using 64 diff I can get down to maybe 8% rejects, but round variance is quite high.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: arielbit on April 15, 2016, 01:33:25 AM
yup pretty stable here, my rig with 1400+ valid shares and only 1 invalid.

the only problem here is this miner coming out pretty late  :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: WhyMe on April 15, 2016, 01:58:36 AM
Testing on 4 280x @1050/1500
dcri 25

After 2 hours :
~79.5M on ETH + ~990M on DCR
0 rejected on ETH, ~14% rejected on DCR

~100w more at wall ( 1035w )

With official ETH miner, i'm at ~81-82M

See more after night.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: o00o on April 15, 2016, 02:03:45 AM
Ok, about 5 hours now:

https://vgy.me/lgE0LI.png

10% + and holding

I have observed similar results over 24hr+.  Invalid shares have dropped to nearly 0, where 1-3% was typical with ethminer (any variant).  And, total submitted shares have definitely increased.

Watching GPU usage %, with claymore they stay at 100% almost all the time.  With genoil or web3 ethminer, there are constant dips to 0%.

Not to mention this miner seems way more stable and consistent.

I do get stupidly high DCR rejects tho (10%+), no matter what difficulty I use.  Hoping the next version with stratum support will improve that.

I couldn't have said it better myself,  I was in the process of tinkering with DCR via SGminer meanwhile mining ETH in hopes of benefiting from additional revenue but with little success, when I stumbled upon what is an absolute thing of beauty.  Unfortunately, I also observed a large number of rejected shares for DCR via Coinmine as well as Suprnova no matter the difficulty so if anyone can resolve the matter, this miner would otherwise be incredibly close to perfection.  I managed to reach ~37 MH/s for Ethereum and ~560 for DCR on an MSI 390x which is quite impressive.  I'm currently running on 15.7.1 and was wondering if 15.12 would yield any further performance improvements.  

Keep up the great work, you most certainly have something to show for it!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: CoffeeCat on April 15, 2016, 02:12:45 AM

KNOWN ISSUES

- Weak/old cards like 7xxx/270/270X cannot handle dual mining properly, Ethereum mining is slower by about 10-15%.
- There is 1-3% performance issue for some 270/270x and Fury cards. It will be fixed soon.


So what about the 280 and the 280X? Do these also take a Ethereum performance hit?

Also, out of curiosity, concerning the fee: how does the fee work out if I'm dual mining on only some of m cards?

Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bensam1231 on April 15, 2016, 02:18:50 AM
Claymore please consider adding Nvidia support... It shouldn't require much more work as Nvidia cards are OCL compliant.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 15, 2016, 02:28:11 AM
I highly suggest to switch to coinmine.pl for DCR.  Choose the diff 8 server, It should help with the rejected shares.  I used to get about 15% rejected on suprnova, but as of now on coinmine it seems to be 5-10%, or even less.  I'll update after it runs at least 24 hours.

And what about global work and 128, 256 options in claymore ? Any chance we can change the assigned values ?  farm recheck ?

As I have said before, there isnt really an improvement in ETH in dual mode, less invalids, but hashrate seems slightly higher or so.  DCR is bonus, so thats good.  I'm going to stick with this miner I think, the added watts is manageable for now.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 15, 2016, 02:54:01 AM
Also, Mr. Claymore, any chance that I'll be able to mine on a different eth pool ?  I'd like to mine on coinmine.pl for eth too I guess.  but its a user.worker setup.  Unless anyone has other suggestions for pools.  I just dislike mining at a pool where you can't see overall luck, and by blocks.  I like those stats.  

edit:  coinmine has lower rejects, but i'm getting some disconnects here and there...

So far on diff 8 : 74 accepted, rejected 3.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Za1n on April 15, 2016, 04:07:52 AM
Running Claymore's miner for 8 hours on 4x R9 380 (non X) rig, the hash rate on miner shows 80 Mhash/sec, but on the pool (Etehrmine.org) it dropped from 75 Mhash down to 45 Mhash. I switched back to qtminer for a few hours and my pool hash rate returned to normal, so I rebooted the rig and tried the Claymore miner again and within a hour I seen the hash rate going down again. For now I switched back to qtminer.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 15, 2016, 04:21:02 AM
edit:  coinmine has lower rejects, but i'm getting some disconnects here and there...

So far on diff 8 : 74 accepted, rejected 3.

I was still at 10%+ rejects when I tested coinmine for DCR.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Prelude on April 15, 2016, 04:40:46 AM
Sorry if this has been asked before, but is a solo version planned? I hate pool mining ethereum, it's just not meant for it. Solo works out to be more profitable in every case if you're not impatient.

Thanks for the work, claymore!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 15, 2016, 04:58:39 AM
 After 24 hours testing, 4 380 cards at 1150/1450 in qt-mode mining only ethereum:

total hashrate of the 4 cards, reported by ethermine, rose by 6.6      watts burned increased by 23.  a 3% gain for 3% more cost in this case. That doesnt sound like a win but if it were 12 cards that would be like getting a free bonus 380 card that only uses 69 watts, not counting the deserved devfee.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: alevlaslo on April 15, 2016, 04:58:58 AM
i have 3 cards, -dcri 50,50,100 need to work that, correct please

Oh, it work! Sorry..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Chugumoto on April 15, 2016, 06:14:06 AM
ok and if the card can't mine eth but only dcr ?
EthDcrMiner64 -di 0123
cgminer -d 4


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: rednoW on April 15, 2016, 06:16:27 AM
Dear Claymore.

This night both of my computers mining eth on dwarfpool with your miner 1.2 beta "forgot" their worker names and began to showing as one worker "x" on Dwarfpool statistics. After miner restart on both computers all returned to normal mode.

My run.bat files was following

1.
EthDcrMiner64.exe -di 012 -dcri 20,20,50 -epool eth-ru.dwarfpool.com:8008 -ewal 0x92b47a8f6fa83af56ebeb38429bc2382f339f7b3 -epsw x -eworker 7990 -dir f:\Ethash  -dpool dcr.coinmine.pl:2032 -dwal xxx.xxx -dpsw p

2.
EthDcrMiner64.exe -di 01 -dcri 10,10 -epool eth-ru.dwarfpool.com:8008 -ewal 0x92b47a8f6fa83af56ebeb38429bc2382f339f7b3 -epsw x -eworker hd7950 -dir c:\Ethash  -dpool dcr.coinmine.pl:2032 -dwal xxx.xxx -dpsw p

It happens 2 or 3 hours ago.
You can see it on my statistics page (not very clear, honestly)
http://dwarfpool.com/eth/address?wallet=92b47a8f6fa83af56ebeb38429bc2382f339f7b3&allpayouts=1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: chup on April 15, 2016, 06:22:39 AM
Claymore, what ethi (intensity) parameters correspond to global-work 8192 and 16384 values? Thx.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Strannik-74 on April 15, 2016, 06:37:58 AM
del


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: thesaltonsea on April 15, 2016, 06:50:37 AM
Dear Claymore.

This night both of my computers mining eth on dwarfpool with your miner 1.2 beta "forgot" their worker names and began to showing as one worker "x" on Dwarfpool statistics. After miner restart on both computers all returned to normal mode.

My run.bat files was following

1.
EthDcrMiner64.exe -di 012 -dcri 20,20,50 -epool eth-ru.dwarfpool.com:8008 -ewal 0x92b47a8f6fa83af56ebeb38429bc2382f339f7b3 -epsw x -eworker 7990 -dir f:\Ethash  -dpool dcr.coinmine.pl:2032 -dwal xxx.xxx -dpsw p

2.
EthDcrMiner64.exe -di 01 -dcri 10,10 -epool eth-ru.dwarfpool.com:8008 -ewal 0x92b47a8f6fa83af56ebeb38429bc2382f339f7b3 -epsw x -eworker hd7950 -dir c:\Ethash  -dpool dcr.coinmine.pl:2032 -dwal xxx.xxx -dpsw p

It happens 2 or 3 hours ago.
You can see it on my statistics page (not very clear, honestly)
http://dwarfpool.com/eth/address?wallet=92b47a8f6fa83af56ebeb38429bc2382f339f7b3&allpayouts=1

+1, same here on nanopool .

Anyone get it to work with ethereum.miningpoolhub.com ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: dominuspro on April 15, 2016, 06:55:06 AM
I still have many DCR rejects. Allways above 10% at suprnova diff 8. It is above 20% if I chose diff 4.
The eth performance on ethermine is great.

I guess it would be better with dcr stratum support  :P


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: martorix on April 15, 2016, 07:33:26 AM
Hi,

This miner is great.
However I have these two issues:

1. Too much rejected dcr shares on dcr.suprnova.cc pool (around 10%), no matter the changes in selected diff.
2. In ETH only mode, on a machine with 4x290x, the reported hashrate by the miner is as follows: GPU0 - 25.938 Mh/s, GPU1 - 29.134 Mh/s, GPU2 - 26.027 Mh/s, GPU3 - 25.815 Mh/s 
Is there anything I can do, to make all GPUs' hashrate equal to GPU1 .

Thanks in advance.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bouc on April 15, 2016, 07:36:02 AM
I think I won't use your software anymore. woke up this morning, took a look at ethermine and one of my worker disappeared.
had a mail from ethermine warning me of a morker offline at the beginning of my night.

And when I looked at that worker this morning, it was still submitting shares but not for me... as not showed on ethermine.  ???

I think, you've had a full night of fees.

End of story with your software for me. went back to ethminer. (I like to have kisses also when I'm fucked.....)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: adaseb on April 15, 2016, 07:57:45 AM
I think I won't use your software anymore. woke up this morning, took a look at ethermine and one of my worker disappeared.
had a mail from ethermine warning me of a morker offline at the beginning of my night.

And when I looked at that worker this morning, it was still submitting shares but not for me... as not showed on ethermine.  ???

I think, you've had a full night of fees.

End of story with your software for me. went back to ethminer. (I like to have kisses also when I'm fucked.....)

All your GPUs probably crashed, and the program locked up but it was still mining on the GPU itself just not being able to submit anything.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Xccel on April 15, 2016, 08:02:19 AM
me to !!! my rigs dont share in dwarft but in local he send shares my gpu dont crash :o 6h lost...

http://dwarfpool.com/eth/address?wallet=3e3b6b0c72e1df18dbfee0fbc341be65a09a4320


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: adaseb on April 15, 2016, 08:16:42 AM
Probably a bug of some sort. Claymore is legit, he has been making miners for years, don't think he would scam us.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 08:30:54 AM
Miner shows everything related to devfee. It must show "DevFee: start mining" and after 36 or 72 seconds it must write "DevFee: stop mining and disconnect". You can enable logging to file with option "-dbg 1" and then search all these strings. If you see some strange things, please PM me the log file so I can check it.
You can also decrease "-ethi" value to "8" or to "4" and check if it works more stable. This miner loads GPUs more than standard miner so if you overclocked GPUs you should check stability of this miner without overclocking, you can assign only one rig for such tests.
If you think that this miner steals your power you can download WireShark and check all packets that miner sends when you see something strange, it is not a complex task. And, of course, you can wait for more stable version if current version does not work for you, or do not use this miner at all.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 08:31:24 AM
I still have many DCR rejects. Allways above 10% at suprnova diff 8. It is above 20% if I chose diff 4.
The eth performance on ethermine is great.

I guess it would be better with dcr stratum support  :P

Will be released within 24 hours.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 08:35:22 AM
Dear Claymore.

This night both of my computers mining eth on dwarfpool with your miner 1.2 beta "forgot" their worker names and began to showing as one worker "x" on Dwarfpool statistics. After miner restart on both computers all returned to normal mode.

My run.bat files was following

1.
EthDcrMiner64.exe -di 012 -dcri 20,20,50 -epool eth-ru.dwarfpool.com:8008 -ewal 0x92b47a8f6fa83af56ebeb38429bc2382f339f7b3 -epsw x -eworker 7990 -dir f:\Ethash  -dpool dcr.coinmine.pl:2032 -dwal xxx.xxx -dpsw p

2.
EthDcrMiner64.exe -di 01 -dcri 10,10 -epool eth-ru.dwarfpool.com:8008 -ewal 0x92b47a8f6fa83af56ebeb38429bc2382f339f7b3 -epsw x -eworker hd7950 -dir c:\Ethash  -dpool dcr.coinmine.pl:2032 -dwal xxx.xxx -dpsw p

It happens 2 or 3 hours ago.
You can see it on my statistics page (not very clear, honestly)
http://dwarfpool.com/eth/address?wallet=92b47a8f6fa83af56ebeb38429bc2382f339f7b3&allpayouts=1

+1, same here on nanopool .

Looks like a bug. I'm rewriting some network-related routines to support third "miner-proxy" stratum mode, if you see this issue for next version, set "-dbg 2" and PM me the log file.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bouc on April 15, 2016, 08:36:03 AM
I think I won't use your software anymore. woke up this morning, took a look at ethermine and one of my worker disappeared.
had a mail from ethermine warning me of a morker offline at the beginning of my night.

And when I looked at that worker this morning, it was still submitting shares but not for me... as not showed on ethermine.  ???

I think, you've had a full night of fees.

End of story with your software for me. went back to ethminer. (I like to have kisses also when I'm fucked.....)

All your GPUs probably crashed, and the program locked up but it was still mining on the GPU itself just not being able to submit anything.


Probably a bug of some sort. Claymore is legit, he has been making miners for years, don't think he would scam us.

none of my GPUs crashed, I looked at it a few minutes before shutting the mining software down. they all submitted successfully shares.

I think it is a bug also as my two others rigs worked normally. but I think Claymore have now fees for a few month in advanced from me and I'm not happy with it.
too risky for me.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bouc on April 15, 2016, 08:41:15 AM
Miner shows everything related to devfee. It must show "DevFee: start mining" and after 36 or 72 seconds it must write "DevFee: stop mining and disconnect". You can enable logging to file with option "-dbg 1" and then search all these strings. If you see some strange things, please PM me the log file so I can check it.
You can also decrease "-ethi" value to "8" or to "4" and check if it works more stable. This miner loads GPUs more than standard miner so if you overclocked GPUs you should check stability of this miner without overclocking, you can assign only one rig for such tests.
If you think that this miner steals your power you can download WireShark and check all packets that miner sends when you see something strange, it is not a complex task. And, of course, you can wait for more stable version if current version does not work for you, or do not use this miner at all.

Hi Claymore, thanks for the answer.

I'm not saying that you're a thief... I now what being a dev is ;)

But what I the can't explain is where did the shares goes then... not to my account anyway. my miner was quietly hashing at about 84MH/s submitting successfully shares from all 4 GPUs.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 08:43:57 AM
I think I won't use your software anymore. woke up this morning, took a look at ethermine and one of my worker disappeared.
had a mail from ethermine warning me of a morker offline at the beginning of my night.

And when I looked at that worker this morning, it was still submitting shares but not for me... as not showed on ethermine.  ???

I think, you've had a full night of fees.

End of story with your software for me. went back to ethminer. (I like to have kisses also when I'm fucked.....)

All your GPUs probably crashed, and the program locked up but it was still mining on the GPU itself just not being able to submit anything.


Probably a bug of some sort. Claymore is legit, he has been making miners for years, don't think he would scam us.

none of my GPUs crashed, I looked at it a few minutes before shutting the mining software down. they all submitted successfully shares.

I think it is a bug also as my two others rigs worked normally. but I think Claymore have now fees for a few month in advanced from me and I'm not happy with it.
too risky for me.

Have you checked what miner shows? Did it show "DevFee: start mining" and no "DevFee: stop mining and disconnect"?

TO ALL: set "-dbg 0" or "-dbg 1" (or even -dbg 2) if you want to get more details about miner actions. For "-dbg 2" (undocumented) it will even write all received/sent packets to the log. You can PM me the log if you see something strange and I will check it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bouc on April 15, 2016, 08:48:31 AM

Have you checked what miner shows? Did it show "DevFee: start mining" and no "DevFee: stop mining and disconnect"?

TO ALL: set "-dbg 0" or "-dbg 1" (or even -dbg 2) if you want to get more details about miner actions. For "-dbg 2" it will even write all received/sent packets to the log. You can send PM me the log if you see something strange and I will check it.

Yes I did check this, and no DevFee was on screen (and no "Default" worker on my account)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 08:59:03 AM

Have you checked what miner shows? Did it show "DevFee: start mining" and no "DevFee: stop mining and disconnect"?

TO ALL: set "-dbg 0" or "-dbg 1" (or even -dbg 2) if you want to get more details about miner actions. For "-dbg 2" it will even write all received/sent packets to the log. You can send PM me the log if you see something strange and I will check it.

Yes I did check this, and no DevFee was on screen (and no "Default" worker on my account)

Probably you don't have log file. Please send me your command line, I will check it. Another question: Did "Total Shares" values was increased when share is found? For devfee shares "Total Shares" value is not increased.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Gagana on April 15, 2016, 09:02:44 AM
A nice miner. But help me, please, with the following.

I see om dwarf a low speed. I go to check the miner. It shows that all 5 GPU is working perfectly, the speed is as usual. But looking at one of the cards, I see it stops working. Fans are stopped and it's cold. But the miner says that everything is fine. I restart the miner and it runs good as usual. I have 3 questions.

1) Is it a bug, that miner shows a working card that is not actually working?
2) How to understand from outside, that any card stopped, to restart the miner?
3) Is it possible to add this control inside the miner?

While using the standard eth.exe I could redirect the console output to the log file and check this file from time to time. If it stopped to change, I just restarted the miner or rebooted the rig. How to monitor this miner?

P.S. Will check, if the problem persists on 1.2
P.P.S. Thanks for the coloring!!!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bouc on April 15, 2016, 09:07:45 AM

Have you checked what miner shows? Did it show "DevFee: start mining" and no "DevFee: stop mining and disconnect"?

TO ALL: set "-dbg 0" or "-dbg 1" (or even -dbg 2) if you want to get more details about miner actions. For "-dbg 2" it will even write all received/sent packets to the log. You can send PM me the log if you see something strange and I will check it.

Yes I did check this, and no DevFee was on screen (and no "Default" worker on my account)

Probably you don't have log file. Please send me your command line, I will check it. Another question: Did "Total Shares" values was increased when share is found? For devfee shares "Total Shares" value is not increased.

You're right, I don't have log file... and Total Shares was increasing.
here is my command line (using the original start.bat on win7x64 15.12 with gpu miner 1.2) : EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.miner -epsw x -mode 1 -esm 1 -cclock 1100 -mclock 1500


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 09:12:33 AM
You're right, I don't have log file... and Total Shares was increasing.
here is my command line (using the original start.bat on win7x64 15.12 with gpu miner 1.2) : EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.miner -epsw x -mode 1 -esm 1 -cclock 1100 -mclock 1500

It's ok... I don't have ideas what happend, but next version will have "-dbg" as "0" by default so log file is created and I can get more details.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bouc on April 15, 2016, 09:17:23 AM
You're right, I don't have log file... and Total Shares was increasing.
here is my command line (using the original start.bat on win7x64 15.12 with gpu miner 1.2) : EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.miner -epsw x -mode 1 -esm 1 -cclock 1100 -mclock 1500

It's ok... I don't have ideas what happend, but next version will have "-dbg" as "0" by default so log file is created and I can get more details.

it's a good idea :)

thanks for your work anyway, it's people like you who make all this happen!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 09:29:01 AM
A nice miner. But help me, please, with the following.

I see om dwarf a low speed. I go to check the miner. It shows that all 5 GPU is working perfectly, the speed is as usual. But looking at one of the cards, I see it stops working. Fans are stopped and it's cold. But the miner says that everything is fine. I restart the miner and it runs good as usual. I have 3 questions.

1) Is it a bug, that miner shows a working card that is not actually working?
2) How to understand from outside, that any card stopped, to restart the miner?
3) Is it possible to add this control inside the miner?

While using the standard eth.exe I could redirect the console output to the log file and check this file from time to time. If it stopped to change, I just restarted the miner or rebooted the rig. How to monitor this miner?

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.
2. You can enable logging to a file and check its speed (after I implement #1).
3. api/sockets for remove management is not supported yet.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Maxikosw on April 15, 2016, 10:06:44 AM
Hey mister claymore. Please add options to 3 failover eth pools and i will use this miner..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: qqqq on April 15, 2016, 10:45:57 AM
3. api/sockets for remove management is not supported yet.

You mean "remote" ? That's what i always wanted since XPM miners ))


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: madmartyk on April 15, 2016, 10:51:51 AM
What settings are you all using for a 280x and a 290x?  Went digging through the thread and found nothing.

Also can you use the miner for EXP on suprnova?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: WhyMe on April 15, 2016, 11:26:44 AM
Testing on 4 280x @1050/1500
dcri 25

After 2 hours :
~79.5M on ETH + ~990M on DCR
0 rejected on ETH, ~14% rejected on DCR

~100w more at wall ( 1035w )

With official ETH miner, i'm at ~81-82M

See more after night.

17.4% rejected after 11h30 running ...
Not sure it's a good deal finally.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Gagana on April 15, 2016, 12:01:01 PM


1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.
2. You can enable logging to a file and check its speed (after I implement #1).
3. api/sockets for remove management is not supported yet.

When do you expect to release p.1?

P.S. Many thanks for the coloring in console!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 12:23:54 PM
It seems there are not any miners for AMD cards that can mine Decred via Stratum. Am I correct? I'd like to check/compare/test them.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: restless on April 15, 2016, 12:30:22 PM
Tpruvot (yiimp pool) has one, maybe W0lf too


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 12:54:52 PM
Tpruvot (yiimp pool) has one, maybe W0lf too

Thanks, found it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 15, 2016, 01:25:20 PM
edit:  coinmine has lower rejects, but i'm getting some disconnects here and there...

So far on diff 8 : 74 accepted, rejected 3.

I was still at 10%+ rejects when I tested coinmine for DCR.



Damn that sucks.  AFter 12 hours i'm at 5% rejects, so a little better I suppose.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: cryptoc19 on April 15, 2016, 01:50:20 PM
Claymore, first of all, thank you for all your great miners! I've been using them for a while, for various crypto currencies, but this must be the one I've been expecting the most.

I do have a question though, I'm not sure this is a bug or it has something to do with my AMD card (hope it's not failing!). I'm talking about a R9 390.
This happens rather seldom when mining on miningpoolhub.com, but extremely often on dwarfpool.com.

Extract from the log, this is what I'm talking about :


16:48:29:200   b50   ETH: 04/15/16-16:48:29 - New job (target 0x0000001ec1e0492c) from europe1.ethereum.miningpoolhub.com:20536
16:48:29:200   b50   ETH - Total Speed: 32.431 Mh/s, Total Shares: 63, Rejected: 0, Time: 00:11
16:48:29:200   b50   ETH: GPU0 32.431 Mh/s
16:48:29:293   99c   Job changed, drop current round
16:48:31:325   8f0   Cannot find any AMD adapters
16:48:31:325   8f0   Cannot find any AMD adapters

16:48:31:747   4d0   Job changed, drop current round
16:48:31:747   99c   ETH: put share nonce 7397df404abad4b
16:48:31:747   99c   ETH round found 1 shares
16:48:31:762   b50   ETH: 04/15/16-16:48:31 - SHARE FOUND - (GPU 0)


As you can see, the miner is submitting shares and they're all accepted just fine, that's not the issue.
The command I'm using is:
EthDcrMiner64.exe -dbg 0 -mode 1 -epool europe1.ethereum.miningpoolhub.com:20536 -ewal MY_WALLET -eworker MY_WORKER -epsw x


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sakuleo on April 15, 2016, 02:03:38 PM
better hasrate or stbbility using OC comands from minner or use amdoverdrive instead?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 15, 2016, 02:09:17 PM
better hasrate or stbbility using OC comands from minner or use amdoverdrive instead?

download msi afterburner


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: AlexBoos on April 15, 2016, 02:25:20 PM
Miner in the dough a little more than a day. It's okay for now. Over time, fading farm name on the pool. Usually after work to the author.
Supernova and stable work https: //dcr.maxminers.net and https://pool.mn/dcr. Less mistakes.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Gagana on April 15, 2016, 02:35:51 PM
Miner in the dough a little more than a day. It's okay for now. Over time, fading farm name on the pool. Usually after work to the author.
Supernova and stable work https: //dcr.maxminers.net and https://pool.mn/dcr. Less mistakes.

If you mean, that the miner suddenly stops sending worker name, then I confirm. Just saw this. It should be rig1 and rig2. But actually looks like an empty name.

http://s019.radikal.ru/i635/1604/8d/998d3e8492bd.png


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: revelacaogr on April 15, 2016, 02:48:08 PM
HD 7950 +280X TOXIC

eth:0 rejects  ethi 16
dcr:less then 3% with diff 64 (( suprnova )) dcri 25


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Prelude on April 15, 2016, 02:54:16 PM
OK, so I actually took the time to look through the thread for Claymore's comments on creating a solo version. Seems he wants to do it, but it isn't a priority for him.

Here are good reasons to support solo mining:

Decentralization and overall ETH health (People, get off of dwarf FFS!!)

No loss of revenue due to pool mining. I ALWAYS come out ahead solo mining VS pool mining with ETH, I've done a lot of testing. If you have over 100MH/s and greater patience than a 3 year old, you should SOLO. (eth just isn't made for pool mining with it's crazy fast blocks)

No trust needed in pool operators (hacks, hiding blocks, hidden fees, human error, etc)

Much funner than mining on a pool.

In an ideal world, your solo miner would work with this solo proxy (https://github.com/sammy007/ether-proxy) because of the added statistics it provides. Not sure I'd solo without it.

So, I ran 500MH/s on nano/supr in dual mode over night. Love your miner. Switching back to solo, though. Now I await your solo version to switch my 2GH/s over to your miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: AlexBoos on April 15, 2016, 02:59:05 PM
ETH - Total Speed: 60.566 Mh/s, Total Shares: 102, Rejected: 9, Time: 01:06
ETH: GPU0 28.849 Mh/s, GPU1 31.716 Mh/s
 DCR - Total Speed: 999.332 Mh/s, Total Shares: 832, Rejected: 34  - https://pool.mn/dcr/
 DCR: GPU0 476.015 Mh/s, GPU1 523.317 Mh/s

GPU0-290x, GPU1-390, -dcri 33  :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Vita1ico on April 15, 2016, 03:17:08 PM

GPU0-290x, GPU1-390, -dcri 33  :)
file  .bat as it is written ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: AlexBoos on April 15, 2016, 03:29:15 PM
EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xwallet -eworker 290 -epsw x -ethi 8 -dpool dcr.pool.mn:4722 -dwal worker -dpsw pass -dcri 33 -dcrt 15


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: devlin on April 15, 2016, 03:45:43 PM
Miner in the dough a little more than a day. It's okay for now. Over time, fading farm name on the pool. Usually after work to the author.
Supernova and stable work https: //dcr.maxminers.net and https://pool.mn/dcr. Less mistakes.

If you mean, that the miner suddenly stops sending worker name, then I confirm. Just saw this. It should be rig1 and rig2. But actually looks like an empty name.

http://s019.radikal.ru/i635/1604/8d/998d3e8492bd.png

I confirm this also.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: madmartyk on April 15, 2016, 03:46:08 PM
EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xwallet -eworker 290 -epsw x -ethi 8 -dpool dcr.pool.mn:4722 -dwal worker -dpsw pass -dcri 33 -dcrt 15

Trying it on my 290 now!!  Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: madmartyk on April 15, 2016, 04:26:43 PM
Can the miner be configured to work with ethermine.org/


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MTJ151 on April 15, 2016, 04:38:48 PM
+1 wanting a solo miner version of this :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Eliovp on April 15, 2016, 04:41:01 PM
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: qqqq on April 15, 2016, 04:46:20 PM
OK, so I actually took the time to look through the thread for Claymore's comments on creating a solo version. Seems he wants to do it, but it isn't a priority for him.

Here are good reasons to support solo mining:

Decentralization and overall ETH health (People, get off of dwarf FFS!!)

No loss of revenue due to pool mining. I ALWAYS come out ahead solo mining VS pool mining with ETH, I've done a lot of testing. If you have over 100MH/s and greater patience than a 3 year old, you should SOLO. (eth just isn't made for pool mining with it's crazy fast blocks)

No trust needed in pool operators (hacks, hiding blocks, hidden fees, human error, etc)

Much funner than mining on a pool.

In an ideal world, your solo miner would work with this solo proxy (https://github.com/sammy007/ether-proxy) because of the added statistics it provides. Not sure I'd solo without it.

So, I ran 500MH/s on nano/supr in dual mode over night. Love your miner. Switching back to solo, though. Now I await your solo version to switch my 2GH/s over to your miner.

I was posting a few same phrases in the thread about advantages also. Totally agree with you.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: revelacaogr on April 15, 2016, 04:46:40 PM
Can the miner be configured to work with ethermine.org/

me too...all good


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Prelude on April 15, 2016, 04:56:18 PM
Glad to see that there are quite a few people wanting solo mining ability. Hopefully that bumps up priority for Claymore! I'm sure there are quite a few GH/s worth of miners out there that would be happy to pay the 2% fee to use his superior miner solo ETH pool DCR mode.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bensam1231 on April 15, 2016, 05:17:53 PM
Still no comment on Nvidia OCL support?

Don't hate the brand, hate the coins. :'(


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: madmartyk on April 15, 2016, 05:20:38 PM
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Cyberclones on April 15, 2016, 05:25:16 PM
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks
thDcrMiner64.exe -dbg 1 -esm 1 -epool us1.ethermine.org:4444 -ewal walletaddress.workername -epsw x


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Alex822 on April 15, 2016, 05:30:30 PM
    v 1.2
    important for R9 290/X 390/X, tested at 3x290.
    Consumption as compared to ether only above -20%, cards temperature- 5%.
    eth 0% rejected, dcr 5% (2 hour)
                     
                                  profit for 1 day:


  • dcri 20   eth 93      dcr 930     eth 9.7  $    dcr 1.258 $ = 10.958$
  • dcri 30   eth 91.6   dcr 1373    eth 9.56 $   dcr 1.912 $ = 11.472$
  • dcri 40   eth 87.7   dcr 1755    eth 9.15 $   dcr 2.438 $ = 11.588$
  • dcri 50   eth 82.8   dcr 2070    eth 8.64 $   dcr 2.876 $ = 11.516$
  • dcri 60   eth 77.9   dcr 2337    eth 8.13 $   dcr 3.255 $ = 11.385$
  • dcri 100  eth 62     dcr 3103    eth 6.47 $   dcr 4.321 $ = 10.791$

$ figures may vary due to different counting different calculators

He was counting on the exchange rate:
1 eth -8.5$
1 dcr -1.5$


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Tacalt on April 15, 2016, 05:35:13 PM
I am using the 1.2 version now. For the old version such as 1.0, I got lots of invalid shares. I change the intensity to 15 instead of 16 in Eth mining. Is that the intended function of the intensity?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: madmartyk on April 15, 2016, 05:35:53 PM
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks
thDcrMiner64.exe -dbg 1 -esm 1 -epool us1.ethermine.org:4444 -ewal walletaddress.workername -epsw x

Seems to be working, takes a while for them to show up..  Thanks!!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: WhyMe on April 15, 2016, 05:44:47 PM
Testing on 4 280x @1050/1500
dcri 25

After 2 hours :
~79.5M on ETH + ~990M on DCR
0 rejected on ETH, ~14% rejected on DCR

~100w more at wall ( 1035w )

With official ETH miner, i'm at ~81-82M

See more after night.

17.4% rejected after 11h30 running ...
Not sure it's a good deal finally.

Better with changing suprnova port for DCR.
7.69% rejected after 45mn.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: revelacaogr on April 15, 2016, 05:46:26 PM
I am using the 1.2 version now. For the old version such as 1.0, I got lots of invalid shares. I change the intensity to 15 instead of 16 in Eth mining. Is that the intended function of the intensity?

eth -intensity  15 rejects 0

dcr -intensity 20

dcr diff 64 supr rejects 0

i think its about balance between the intensitys....

and ofcorse diff 64



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: chup on April 15, 2016, 06:03:15 PM

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.

Please make choice of restarting whole computer. When GPU hangs (repeating exactly same hashrate for 3+ times) and I restart miner, GPU that was hanging starts hashing with exactly half speed. GPU reset via TRIXX has no effect. If I reboot, than everything is normal again. Thx.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: DaveyJones on April 15, 2016, 06:14:11 PM
Miner in the dough a little more than a day. It's okay for now. Over time, fading farm name on the pool. Usually after work to the author.
Supernova and stable work https: //dcr.maxminers.net and https://pool.mn/dcr. Less mistakes.

If you mean, that the miner suddenly stops sending worker name, then I confirm. Just saw this. It should be rig1 and rig2. But actually looks like an empty name.

http://s019.radikal.ru/i635/1604/8d/998d3e8492bd.png

I confirm this also.


Not even just dropping workername .... could even get the shares to my balance... even though miner said he is happely sending shares ... claymore pls fix this... restarting the client here and than cannot be the solution


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Claymore on April 15, 2016, 06:42:07 PM
v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bensam1231 on April 15, 2016, 06:54:42 PM
v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.

Features like Nvidia support? :O


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Gagana on April 15, 2016, 07:14:47 PM

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.

Please make choice of restarting whole computer. When GPU hangs (repeating exactly same hashrate for 3+ times) and I restart miner, GPU that was hanging starts hashing with exactly half speed. GPU reset via TRIXX has no effect. If I reboot, than everything is normal again. Thx.


+1 Sometimes just restarting doesn't help. It could be an option

-forcereboot X

X - number of attempts to restart the thread with no effect. If X=0 then "never"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: igorwhite on April 15, 2016, 07:17:33 PM
Hello Claymore.
Planned version for Linux?
Best Regards


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: alevlaslo on April 15, 2016, 07:54:35 PM
Nicehash pool х11 good pay again, new dualminer ETH+x11 need  ;) http://www.whattomine.com


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 15, 2016, 08:59:56 PM
Getting much lower DCR rejects (and it looks like the exact same eth hashrate) with -ethi 8 . Went from 15-25% rejects with -ethi 16 to ~5% with -ethi 8.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: forzendiablo on April 15, 2016, 11:40:38 PM
Code:
ethpool:
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-esm 1" option to enable "qtminer" mode, in this mode pool will display additional information about shares (accepted/rejected).

 dwarfpool:
   EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-eworker YourWorkerName" option.

so we should change the ETH address that clear. but then there is Redhex.my ?

i dont see where to put worker name for suprnova at all.

can anybody explain ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Cyberclones on April 15, 2016, 11:48:44 PM
Code:
ethpool:
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-esm 1" option to enable "qtminer" mode, in this mode pool will display additional information about shares (accepted/rejected).

 dwarfpool:
   EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-eworker YourWorkerName" option.

so we should change the ETH address that clear. but then there is Redhex.my ?

i dont see where to put worker name for suprnova at all.

can anybody explain ?

Redhex.my is his username.worker for supernova


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: adaseb on April 15, 2016, 11:52:24 PM
I switched back to the regular miner since the difficulty rose and price fell a little for DCR. The profits are 30% less now then a few days ago for DCR.

I would be nice to have a X11 + ETH miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 16, 2016, 12:39:27 AM
I switched back to the regular miner since the difficulty rose and price fell a little for DCR. The profits are 30% less now then a few days ago for DCR.



 90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: arielbit on April 16, 2016, 01:30:19 AM
I switched back to the regular miner since the difficulty rose and price fell a little for DCR. The profits are 30% less now then a few days ago for DCR.



 90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..

mining decred is always an option.

and mining to hold DCR is another option.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sakuleo on April 16, 2016, 01:40:08 AM
support f2pool?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 16, 2016, 02:56:36 AM
90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..

That makes absolutely no sense... total mining output is a fixed value, doesn't matter if more people start mining.
*sideways look*


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 16, 2016, 02:56:41 AM
Why Decred Claymore ?  Just asking.  I actually like the coin too, buy tokens, get POS, etc.  


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 16, 2016, 02:57:53 AM
Why Decred Claymore ?  Just asking.  I actually like the coin too, buy tokens, get POS, etc.  
Probably because it's very processing intensive but not memory intensive.  Good combo with Ethash.

I like decred as well, and think it has a fair bit of potential.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Prelude on April 16, 2016, 03:10:16 AM
90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..

That makes absolutely no sense... total mining output is a fixed value, doesn't matter if more people start mining.
*sideways look*

It does make sense. While the output is fixed at x coins per day, it was mostly being mined by people who believed in the coin and held by them before this miner came out as mining eth was more profitable for the hordes. Now, a large (I'm assuming) percentage of the output is going straight to the exchanges to be dumped for a bit of extra profit, effectively killing the DCR market.

Why Decred Claymore ?  Just asking.  I actually like the coin too, buy tokens, get POS, etc.  
Probably because it's very processing intensive but not memory intensive.  Good combo with Ethash.

I like decred as well, and think it has a fair bit of potential.

Yep, it isn't magic, and I doubt Claymore (or anyone) can just whip up a simultaneous dual algo miner with just any algo. Eth processing is limited by memory, leaving the GPU under utilized. DCR barely uses VRAM, so it doesn't affect ETH mining and can use the unused GPU power left over by ETH.

So, forget about dual mining ETH and X11 and be happy with what you have.  ::)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bensam1231 on April 16, 2016, 04:56:23 AM
90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..

That makes absolutely no sense... total mining output is a fixed value, doesn't matter if more people start mining.
*sideways look*

Yeah, some people don't know how mining works. Mining is a pie. Your slice is equivalent to your hashrate. You don't magic coins out of thin air by having more hash on a network... Just means your slice is smaller... which is why it looks like Dcr is falling out.

90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..

That makes absolutely no sense... total mining output is a fixed value, doesn't matter if more people start mining.
*sideways look*

It does make sense. While the output is fixed at x coins per day, it was mostly being mined by people who believed in the coin and held by them before this miner came out as mining eth was more profitable for the hordes. Now, a large (I'm assuming) percentage of the output is going straight to the exchanges to be dumped for a bit of extra profit, effectively killing the DCR market.

Coin was already on a downhill trend.

http://coinmarketcap.com/currencies/decred/#charts


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: realrover on April 16, 2016, 05:26:06 AM
Tested with Nanopool - works fine.
Good job, Claymore!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: alevlaslo on April 16, 2016, 07:08:29 AM
Getting much lower DCR rejects (and it looks like the exact same eth hashrate) with -ethi 8 . Went from 15-25% rejects with -ethi 16 to ~5% with -ethi 8.
what pool and port you mine? I have only 5% bad shares with coinmine 2032 on default settings


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 16, 2016, 07:15:42 AM
v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.

Stahp making me wait to give you 2% of all my hashes! Oh wait, I already am.

<3


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: o00o on April 16, 2016, 07:21:55 AM
I'm a little curious as to how the developer fee is applied in a rig with multiple cards with some GPUs restricted to mining Ethereum only and was wondering if they were taxed 2% just like those mining Ethereum as well as Decred.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: phzi on April 16, 2016, 07:52:41 AM
I'm a little curious as to how the developer fee is applied in a rig with multiple cards with some GPUs restricted to mining Ethereum only and was wondering if they were taxed 2% just like those mining Ethereum as well as Decred.

Probably.  Could always run 2 instances if you're using different modes.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: knobson on April 16, 2016, 08:08:00 AM
Hello!  How can I run it on coinotron.com?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sadyas on April 16, 2016, 08:27:18 AM
I switched back to the regular miner since the difficulty rose and price fell a little for DCR. The profits are 30% less now then a few days ago for DCR.

I would be nice to have a X11 + ETH miner.

Which regular miner? Do you mean the Ethminer or the Genoil miner?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: andreynk on April 16, 2016, 09:23:13 AM
a lot of DCR rejects with command
Code:
EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal eth.wallet -epsw x -eworker workername1 -dpool http://dcr.suprnova.cc:9111 -dwal login.workername -dpsw 1111

Code:

DCR - Total Speed: 199.542 Mh/s, Total Shares: 120, Rejected: 20
DCR: GPU0 199.542 Mh/s

what's wrong?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: alevlaslo on April 16, 2016, 11:20:57 AM
two points are very similar to quantum physics:
1) one coin is able to accelerate another - DCR accelerates the ETH
2) during the monitoring computer of rejections in times more than without monitoring


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Chugumoto on April 16, 2016, 12:08:16 PM
two points are very similar to quantum physics:
1) one coin is able to accelerate another - DCR accelerates the ETH
2) during the monitoring computer of rejections in times more than without monitoring
you forgot this picture  :)

http://s017.radikal.ru/i410/1604/6b/44c813d31126.jpg


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bbopa637 on April 16, 2016, 12:55:04 PM
Claymore's Dual Ethereum+Decred AMD GPU Miner.
=========================
....
Haven't try it yet, because my Sapphire R9 270X 2G cards can't mine with 15.12 driver, even environment variables doesn't help. But, anyway you are clever than Obama, you are a wunderkind, you are Vitalik Buterin 2.0. Good job!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: aistto on April 16, 2016, 12:58:56 PM
Hello!  How can I run it on coinotron.com?
I think it doesn't work on coinotron.

Claymore
Please add failover option. for eg. it would be userful on dwarfpool.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: bobkillaz on April 16, 2016, 01:21:18 PM
There is obviously issues with nanopool. I tried it for 24h and it wasn't stable at all. sometimes nothing during 10minutes with 21MH/s. I switched back to ethminer and it is way more stable and I have more shares in average.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: fr4nkthetank on April 16, 2016, 01:31:32 PM
Thanks for the answer guys, yeah DCR and ETH is a good match.  I'm just holding all my DCR. When I get enough i'll buy tokens and start the POS.  anybody know how much they cost ?  I havent d/l the client yet.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: revelacaogr on April 16, 2016, 03:00:32 PM
Thanks for the answer guys, yeah DCR and ETH is a good match.  I'm just holding all my DCR. When I get enough i'll buy tokens and start the POS.  anybody know how much they cost ?  I havent d/l the client yet.

https://dcrstats.com


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 16, 2016, 04:33:42 PM
 Another hashrate test:  1 280x + 2 380.  24 hour effective hashrate rose to 60.3 with Claymore Miner, from previous ~ 55 hashrate range with Ethminer.

 Yesterdays different rig of 4 380 cards that rose by 6.6 total hash at expense of 23 extra watts settled own slightly to be gaining 6.4.

Combined, 2 rigs, 7 cards total, gained 11.7 real 24 hour effective hashrate, just slightly less than 9% extra profit even after the devfee, but not considering the 3-4% extra electricity  cost.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: omnik on April 16, 2016, 04:48:19 PM
It's not all about hash, more important are shares submitted.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 16, 2016, 06:10:51 PM
I put the original qtminer and claymores miner in qtminer mode on separate wallets in the very same time and on the same rigs 20 hours ago.

Original qtminer: http://ethermine.org/miners/0xb6ff214f13443b55b404d31a646c09cb568218e0

claymores miner in qtminer mode : http://ethermine.org/miners/0xf9883c988a05c8b2a4d8a54966ba45dd566617b2

Cant imagine more equal performance. The changed the lead several times but neither got ahead with more than 0.02 Ethers

Equal temperatures too. Both stable, the original got 1-2% invalids, the Claymores got 1% fee so I guess it doesnt matter which one to use in only ethereum mining.

I will put the claymores in eth-proxy mode once the next version is released and test again.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 16, 2016, 06:49:10 PM
It's not all about hash, more important are shares submitted.

 True, but in this case they are the same. I was citing fully realized 24 hour effective hashrate, which is derived entirely from ... shares submitted.   Most important of all is that the pool I am in is paying at the new rate- instead of mid 1.8'ish daily ethereum going into my account, finally it is the full 2-something eth that napkin math and eth calculators always said I should be getting.

 Because miners, calculators, and pools all seem to have slightly different ideas about the hashrates rigs actually generate, the truest measure of gpu mining ability is how much ethereum is paid over time. In my rigs, running the Claymore instead of Ethminer, I get more pay.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: Trimegistus on April 16, 2016, 07:19:10 PM
It's not all about hash, more important are shares submitted.

In my rigs, running the Claymore instead of Ethminer, I get more pay.


Same here, but only in pure ETH mode. If I start dual mining mode, I'll lose a significant number of ETH shares. At current DCR prices I don't think it will pay off to spend the extra watts while at the same time decrease ETH income. Just my two cents  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: sammy007 on April 16, 2016, 07:28:41 PM
Is there any performance gain on ethereum in terms of faster GPU kernel?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: calculatorduck on April 16, 2016, 07:35:59 PM
It's not all about hash, more important are shares submitted.

 True, but in this case they are the same. I was citing fully realized 24 hour effective hashrate, which is derived entirely from ... shares submitted.   Most important of all is that the pool I am in is paying at the new rate- instead of mid 1.8'ish daily ethereum going into my account, finally it is the full 2-something eth that napkin math and eth calculators always said I should be getting.

 Because miners, calculators, and pools all seem to have slightly different ideas about the hashrates rigs actually generate, the truest measure of gpu mining ability is how much ethereum is paid over time. In my rigs, running the Claymore instead of Ethminer, I get more pay.

But effective hash rate depends to some degree on luck, right? What pool are using now?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 16, 2016, 07:47:25 PM
It's not all about hash, more important are shares submitted.

 True, but in this case they are the same. I was citing fully realized 24 hour effective hashrate, which is derived entirely from ... shares submitted.   Most important of all is that the pool I am in is paying at the new rate- instead of mid 1.8'ish daily ethereum going into my account, finally it is the full 2-something eth that napkin math and eth calculators always said I should be getting.

 Because miners, calculators, and pools all seem to have slightly different ideas about the hashrates rigs actually generate, the truest measure of gpu mining ability is how much ethereum is paid over time. In my rigs, running the Claymore instead of Ethminer, I get more pay.

Check my post right before yours. Both miners are generating pretty much the same amount of money. They changed lead several times and right now the original qtminer got the lead with 0.015 ethers. Its almost 24 hours now. You cant make good comparison if you run the miners one after another. They should be on equals rigs, same time, same pool as I did. Once Claymore release the 1.3 version i will try the eth-proxy mode.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 08:02:31 PM
v2.0:

- Added Stratum support for Decred.
- Added "-esm 2" option for "miner-proxy" Stratum version - for such pools like coinotron, coinmine, etc.
- Default "-dbg" value is "0" now, log file is created by default. You can disable it with "-dbg -1" option.
- If GPU thread hangs and its speed is not updated, miner shows zero speed for that card.
- Added "-wd" option.
- Added "-r" option.
- Additional checks related to DAG files: checking disc space, removing invalid DAG files.
- Bug fixes.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: thesaltonsea on April 16, 2016, 08:18:36 PM
Nice, will try cointron now :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: DarkRavenGamer on April 16, 2016, 08:28:24 PM
v2.0:

- Added Stratum support for Decred.
- Added "-esm 2" option for "miner-proxy" Stratum version - for such pools like coinotron, coinmine, etc.
- Default "-dbg" value is "0" now, log file is created by default. You can disable it with "-dbg -1" option.
- If GPU thread hangs and its speed is not updated, miner shows zero speed for that card.
- Added "-wd" option.
- Added "-r" option.
- Additional checks related to DAG files: checking disc space, removing invalid DAG files.
- Bug fixes.

Thank you for the update, impressive work! Any plans of what to do for the next update?
Also, does it delete old DAG files when generating new ones?

EDIT: Btw, how much fees are you collecting, i.e, how much hashing power is generated from your miner in total?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Chugumoto on April 16, 2016, 08:31:29 PM
v2.0:

- Added Stratum support for Decred.
- Added "-esm 2" option for "miner-proxy" Stratum version - for such pools like coinotron, coinmine, etc.
- Default "-dbg" value is "0" now, log file is created by default. You can disable it with "-dbg -1" option.
- If GPU thread hangs and its speed is not updated, miner shows zero speed for that card.
- Added "-wd" option.
- Added "-r" option.
- Additional checks related to DAG files: checking disc space, removing invalid DAG files.
- Bug fixes.

Quote
Sorry, this application cannot run under a Virtual Machine
although I run it on the host system


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: rednoW on April 16, 2016, 08:42:37 PM
Tried DCR stratum on  yiimp.ccminer.org:4252
One rejected share after each new job unit (((
Then all accepts till new job.

Update: not after each new job (rejected) ... need more testing ...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Gagana on April 16, 2016, 08:44:39 PM
Thanks for this update!

How to find in the log when -r option is activated? I mean, if something wrong with a GPU, how to find it in the log file. To understand the statistics.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: DMaster2008 on April 16, 2016, 08:48:27 PM
Quote
Sorry, this application cannot run under a Virtual Machine
although I run it on the host system

The same problem when Hyper-V service is active, also on the host.
v1.2 is free of this problem.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Gagana on April 16, 2016, 08:54:22 PM
Mr. Claymore, can you, please, add -dbg option or another one to duplicate the console output to the separate log file. The current dbg 0 is really too wordy.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 08:58:10 PM
Quote
Sorry, this application cannot run under a Virtual Machine
although I run it on the host system

The same problem when Hyper-V service is active, also on the host.
v1.2 is free of this problem.

I made some changes in exe packer to get less false alarms from paranoid antiviruses, but it caused this issue. I re-uploaded v2.0, download it again and check if the problem is gone.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 09:00:22 PM
Tried DCR stratum on  yiimp.ccminer.org:4252
One rejected share after each new job unit (((
Then all accepts till new job.

Update: not after each new job (rejected) ... need more testing ...

It is called "stale shares".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: DMaster2008 on April 16, 2016, 09:07:30 PM
check if the problem is gone.
Gone, many thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: rednoW on April 16, 2016, 09:09:18 PM
Tried DCR stratum on  yiimp.ccminer.org:4252
One rejected share after each new job unit (((
Then all accepts till new job.

Update: not after each new job (rejected) ... need more testing ...

It is called "stale shares".

For now (a short run) it has 145 total shares with 10 rejected. Rather bad statistics. Maybe the miner should stop working on old job immediately when the new job arrives?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 09:13:10 PM
Tried DCR stratum on  yiimp.ccminer.org:4252
One rejected share after each new job unit (((
Then all accepts till new job.

Update: not after each new job (rejected) ... need more testing ...

It is called "stale shares".

For now (a short run) it has 145 total shares with 10 rejected. Rather bad statistics. Maybe the miner should stop working on old job immediately when the new job arrives?

It stops immediately, you can see that miner sends a share, then gets new job, then pool sends "rejected" answer. The problem is on pool - I see sometimes it takes pool about 3-5 seconds to send "accepted" response for share sent. If pool gets new block within this time it sends "rejected".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: MacT on April 16, 2016, 09:13:16 PM
It's not all about hash, more important are shares submitted.

 Because miners, calculators, and pools all seem to have slightly different ideas about the hashrates rigs actually generate, the truest measure of gpu mining ability is how much ethereum is paid over time. In my rigs, running the Claymore instead of Ethminer, I get more pay.

But effective hash rate depends to some degree on luck, right? What pool are using now?

 I'm at ethermine.org . Luck does make variance though the more time involved the less luck impacts anything. I ran for 24 hours. Since the miner hasnt yet existed for a week its difficult to give longer trials. Revisiting my first rig report found that over 2-days it was then gaining very slightly less than using just the first days data, but close enough to be giving a pretty accurate picture of whether this miner was giving more ethereum than ethminer.


Check my post right before yours. Both miners are generating pretty much the same amount of money.You cant make good comparison if you run the miners one after another. They should be on equals rigs, same time, same pool as I did.

 I agree your way is a greater scientific methodology, but I disagree that good comparisons can't be made any other ways. Given that the previous value of daily hashrate is well known and time proven, making just the one change of switching mining software does create a valid comparison between the two. While the new higher hashrate }could{ be a fluke result, todays addition 24 more hours of data, along with multiple others reporting similar results, suggest it is not a fluke at all.

 Perhaps you are using cards that Claymore doesnt give a benefit to? We dont know because nobody has compared the new improvement results across all gpu versions, other than we know 270s dont function well with it yet.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: rednoW on April 16, 2016, 09:17:51 PM
It stops immediately, you can see that miner sends a share, then gets new job, then pool sends "rejected" answer. The problem is on pool - I see sometimes it takes pool about 3-5 seconds to send "accepted" response for share sent. If pool gets new block within this time it sends "rejected".

What stratum DCR pool would you recommend to use with your miner?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 09:19:13 PM
It stops immediately, you can see that miner sends a share, then gets new job, then pool sends "rejected" answer. The problem is on pool - I see sometimes it takes pool about 3-5 seconds to send "accepted" response for share sent. If pool gets new block within this time it sends "rejected".

What stratum DCR pool would you recommend to use with your miner?

Currently I use supronova though it does not support vardiff, it may cause problems if everyone starts using this pool. May be they will fix it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: omnik on April 16, 2016, 09:26:14 PM
Nice work Claymore, thank you for frequent updates.

Any updates on 270/X, the "weak" cards?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 09:31:24 PM
Nice work Claymore, thank you for frequent updates.

Any updates on 270/X, the "weak" cards?

I'm still working on it, also on improvements for Fury cards.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: formator on April 16, 2016, 09:51:30 PM
Hello any example for coinotron?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 10:01:23 PM
Hello any example for coinotron?

Check OP or readme.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 16, 2016, 10:02:43 PM
Thank you. I've testing v 2.0 now. Got above 10% Rej from zpool-stratum (DCR). Trying sprnova stratum (DCR), and it looks much better, about 3%. Need more time for better numbers. What about solo version, i am waiting ))


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: zorvalth on April 16, 2016, 10:07:03 PM
It's not all about hash, more important are shares submitted.

 Because miners, calculators, and pools all seem to have slightly different ideas about the hashrates rigs actually generate, the truest measure of gpu mining ability is how much ethereum is paid over time. In my rigs, running the Claymore instead of Ethminer, I get more pay.

But effective hash rate depends to some degree on luck, right? What pool are using now?

 I'm at ethermine.org . Luck does make variance though the more time involved the less luck impacts anything. I ran for 24 hours. Since the miner hasnt yet existed for a week its difficult to give longer trials. Revisiting my first rig report found that over 2-days it was then gaining very slightly less than using just the first days data, but close enough to be giving a pretty accurate picture of whether this miner was giving more ethereum than ethminer.


Check my post right before yours. Both miners are generating pretty much the same amount of money.You cant make good comparison if you run the miners one after another. They should be on equals rigs, same time, same pool as I did.

 I agree your way is a greater scientific methodology, but I disagree that good comparisons can't be made any other ways. Given that the previous value of daily hashrate is well known and time proven, making just the one change of switching mining software does create a valid comparison between the two. While the new higher hashrate }could{ be a fluke result, todays addition 24 more hours of data, along with multiple others reporting similar results, suggest it is not a fluke at all.

 Perhaps you are using cards that Claymore doesnt give a benefit to? We dont know because nobody has compared the new improvement results across all gpu versions, other than we know 270s dont function well with it yet.

I'm using r9 380, dont know if they are optimized. I updated the miner and now the links i gave are original qtminer vs Claymore eth-proxy method.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 10:09:01 PM
Thank you. I've testing v 2.0 now. Got above 10% Rej from zpool-stratum (DCR). Trying sprnova stratum (DCR), and it looks much better, about 3%. Need more time for better numbers. What about solo version, i am waiting ))

Let me implement most important features for pool version firstly, I think it will take 1-2 weeks.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: formator on April 16, 2016, 10:17:00 PM
Hello any example for coinotron?

Check OP or readme.

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x -allpools 1

Redhex.rig1 is a wallet?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 16, 2016, 10:23:56 PM
Hello any example for coinotron?

Check OP or readme.

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x -allpools 1

Redhex.rig1 is a wallet?

It is username.workername


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 16, 2016, 11:03:23 PM
After 1 hour on sprnova Decret stratum protocol i got from 2-3%. Very nice.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: formator on April 16, 2016, 11:27:39 PM
ethminer--cointron-- 15mh\s

claymore--11mh\s  why? (R7 370)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: psk5000 on April 17, 2016, 01:25:33 AM
ethminer--cointron-- 15mh\s

claymore--11mh\s  why? (R7 370)

same 4x r7 370
qtminer : 60mh/s
claymore : 55mh/s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 17, 2016, 01:28:16 AM
I'm using this cmdline with the new version:

Code:
EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal 0x2c988a9d1b730520ad270ed0ec68a77dbe2f0264/PC -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Trimegisto.PC -dpsw x -tt 75 -dcri 20 -r 0

After 3 hours, my ETH shares decreased about 5% but my DCR efficiency is now at above 98%.

So, the results are promising and I'll give this new version some more hours to test it's stability.

Note: I'm using 6 270X, a 7870 and two 7950s, thus a mix of Pitcairn and Tahiti cards.

@Claymore: I'm looking forward to test your 270x optimized code!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: phzi on April 17, 2016, 01:44:55 AM
After a few hours, I am at <1% DCR rejects on stratum.  No change to ethash output.  Big improvement from 20-30% rejects with http getwork.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 02:23:15 AM
Ran v2 for 4-5 hours, rig 4 x R9-390 (stock settings), AMD 8-core CPU, 16GB RAM

Run command: "EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal 0x... -epsw x -dpool stratum+tcp://mine.zpool.ca:5744 -dwal 1... -dpsw c=BTC,decred"

POOL: ethermine.org
ETH - Total Speed: 117.066 Mh/s, Total Shares: 534, Rejected: 0, Time: 05:16
ETH: GPU0 29.388 Mh/s, GPU1 29.162 Mh/s, GPU2 29.239 Mh/s, GPU3 29.277 Mh/s

POOL: zpool.ca
DCR - Total Speed: 1755.988 Mh/s, Total Shares: 892, Rejected: 76
DCR: GPU0 440.823 Mh/s, GPU1 437.435 Mh/s, GPU2 438.581 Mh/s, GPU3 439.149 Mh/s

Summary:
Compared to previous config. running qtminer (ETH) and sgminer (DCR) in parallel.
1. ETH: averages 59-61Mhs total. DCR: 3.1 Gh/s
2. v2 delivers 2x more hashing so this is interesting and good.
3. However, in ethermine worker dashboard, hash info is consistent but no shares and invalid shares reported.
3b. Shares seems to be registered (unconfirmed) but the dashboard doesnt show it at all.
3c. Is my syntax used above correct? I have used plain vanilla settings without switches.
4. DCR: averages 1.756 Gh/s which is lower than sgminer's 3.1 Gh/s @ diff level 12
5. Reject rate is also quite high at 8.5% compared to sgminer 1.7%
6. During the run, 2 cpuminer instance were mining argon2 and yescrypt. They are using at least 4 threads each. I dont think this will impact v2 run since they dont touch the GPUs and vRAM.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: adaseb on April 17, 2016, 02:24:16 AM
Too bad the price for DCR is going down and the difficulty is going up. Difficulty almost 50% gain in 1 week for DCR.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 03:14:43 AM
is coinotron and (stratum DCR) suprnova supported in dual mining?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: wincomo on April 17, 2016, 04:05:39 AM
@arielbit    Yes, Dual stratum:
Code:
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal user.worker -esm 2 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.worker -dpsw x -allpools 1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 04:37:49 AM
@arielbit    Yes, Dual stratum:
Code:
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal user.worker -esm 2 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.worker -dpsw x -allpools 1

thanks...

played with the syntax earlier..it run but the DCR hashes didn't show on suprnova...

will continue testing here.

EDIT: WORKS!  :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: zorvalth on April 17, 2016, 04:44:19 AM
@Claymore, Is it suppose to be better on R9 380 (tonga) cards?

48 hours of testing on equal rigs and the original miner and yours are making pretty much the same result.

Right not after 10 hours of the new version vs original qtminer:

Ballance: 0.4717089107482806 vs 0.4826856692655387

miners changed lead several time but the biggest lead was around 0.01 Ether

-cclock and -mclock are not working for me too.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: o00o on April 17, 2016, 05:59:17 AM
Claymore, I'm a little curious as to how the developer fee is applied in a rig with multiple cards with some GPUs restricted to mining Ethereum only and was wondering if they were taxed 2% just like those mining Ethereum as well as Decred.

Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 06:01:40 AM
Claymore, I'm a little curious as to how the developer fee is applied in a rig with multiple cards with some GPUs restricted to mining Ethereum only and was wondering if they were taxed 2% just like those mining Ethereum as well as Decred.

Thanks!

from OP
Quote
This miner is free-to-use, however, current developer fee is 1% for Ethereum-only mining mode (-mode 1) and 2% for Ethereum+Decred mining mode (-mode 0), every hour the miner mines for 36 or 72 seconds for developer.
Decred is mined without developer fee.
If you don't agree with the dev fee - don't use this miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 06:13:39 AM
watching my rig mining in dual mode..it seems that DCR shares are getting fewer, almost none in my other rig (only at the beginning of mining DCR shares appeared)...watching in suprnova dashboard my rig with almost no DCR share (with shares at the beginning of mining) is gone (not submitting shares)

it seems my 5870 ~800Mhs solo mining with sgminer is outperforming the DCR dual mode that generates 1300 to 1700 Mhs for DCR mining.

the rig with 3x r9 390 and 1 390x stopped submitting shares while the rig with 4x 280x is okay i think..

that's why I asked about dual mining earlier with coinotron (ETH) and suprnova (DCR).. the rig with 390s have hashes but not submitting shares

EDIT: my rig with 390s with ~1700 Mhs submitted shares shows up on suprnova with 7300 Mhs after being gone for a while...will observe more for a longer period of time...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 06:35:00 AM
after running v2 for whole day...
I noticed my GPU temp shot up to the normal mid-70s to 95c!
is this normal?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 06:40:01 AM
after running v2 for whole day...
I noticed my GPU temp shot up to the normal mid-70s to 95c!
is this normal?

check your GPU thermal paste and GPU fan for problems..mining DCR adds more to GPU core temps..thermal paste tends to dry faster under this situation.

my temps didn't change much here


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 17, 2016, 06:55:07 AM
I have 50% rejects on DCR stratum (Nano + 295x2)

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xce0999a83d1473aa4a8f0f6705bff4c35375eb04 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal alevlaslo.1 -dpsw x -wd 1 -dcri 100,40,40


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 07:10:01 AM
my 390s rig does not show in suprnova for a while now..only DCR hashes in the miner are there... no "DCR share found" or DCR share accepted"

while the 280x rig is okay.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Fanpant on April 17, 2016, 07:40:19 AM
ethminer--cointron-- 15mh\s

claymore--11mh\s  why? (R7 370)

same 4x r7 370
qtminer : 60mh/s
claymore : 55mh/s


R7 370 or similar cards are lower in speed compared to qtminer or Ethminer. 280x or higher are faster.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 17, 2016, 07:53:40 AM
my 390s rig does not show in suprnova for a while now..only DCR hashes in the miner are there... no "DCR share found" or DCR share accepted"

while the 280x rig is okay.

PM me zipped log file please.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: DuvajBalone on April 17, 2016, 08:04:49 AM
@Claymore, Is it suppose to be better on R9 380 (tonga) cards?

48 hours of testing on equal rigs and the original miner and yours are making pretty much the same result.

Right not after 10 hours of the new version vs original qtminer:

Ballance: 0.4717089107482806 vs 0.4826856692655387

miners changed lead several time but the biggest lead was around 0.01 Ether

-cclock and -mclock are not working for me too.
So there is no point of using this miner in ETH only mode, also power consumption is a little higher.

But I noticed that rigs with 270x did not stop mining when DAG changed , with other miners it always stop and I have to manually restart miner. It could be a big plus if it works. I will see if it stops on next DAG change.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 17, 2016, 08:07:23 AM
Thanks for new relize, only 2-3% rejects now on this port!

http://dcr.coinmine.pl:2999


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 17, 2016, 08:12:52 AM
my 390s rig does not show in suprnova for a while now..only DCR hashes in the miner are there... no "DCR share found" or DCR share accepted"

while the 280x rig is okay.

PM me zipped log file please.

will mine for about 30mins again in dual..and send you the a fresh log..(because i switched to ETH only, got lost in a lot of log files)


off topic:

you might want to take a peek at equihash POW

you can't be late for this  ;)

https://bitcointalk.org/index.php?topic=1438066.new#new  (https://bitcointalk.org/index.php?topic=1438066.new#new)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: olajos on April 17, 2016, 09:54:50 AM
Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Xdragon on April 17, 2016, 10:04:50 AM
Has anyone managed to mine on coinmine.pl with qtminer mode? Here is my .bat file
Code:
EthDcrMiner64.exe -epool eth.coinmine.pl:4001 -ewal Login -eworker Login.worker -epsw 1 -mode 1 -esm 1 -allpools 1
I also tried different combinations with -ewal and -eworker, but no avail.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 17, 2016, 10:24:04 AM
stratum+tcp://dcr.pool.mn:4800

only 1% rejects!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 17, 2016, 10:41:14 AM
After 12 hours on suprnova (2.0-2.2 %) Rej.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 17, 2016, 11:00:49 AM
10 minutes on supernova stratum: 150 good shares, 100 bad


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: zorvalth on April 17, 2016, 11:27:59 AM
Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: olajos on April 17, 2016, 11:51:22 AM
Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

ETH: GPU0 19.954 Mh/s, GPU1 18.990 Mh/s, GPU2 28.451 Mh/s

always get this. not matter the team viewer or anything.... i can send the log.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: AlexBoos on April 17, 2016, 12:18:02 PM
10 minutes on supernova stratum: 150 good shares, 100 bad

With pool Supernova has long been clear. There Ether and very poorly produced.  >:(


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: knobson on April 17, 2016, 12:25:35 PM
!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: madmartyk on April 17, 2016, 12:59:14 PM
!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

Maybe it's something you did, I have been using the 2.0 for 12 hours now and everything is right where it should be.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 17, 2016, 02:16:20 PM
With pool Supernova has long been clear. There Ether and very poorly produced.  >:(

on DCR


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: zorvalth on April 17, 2016, 02:47:24 PM
Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

ETH: GPU0 19.954 Mh/s, GPU1 18.990 Mh/s, GPU2 28.451 Mh/s

always get this. not matter the team viewer or anything.... i can send the log.

Are you sure they are exact make and model, same clock? Maybe the faster is samsung memory and the slower is elpida? 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: olajos on April 17, 2016, 03:23:31 PM
Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

ETH: GPU0 19.954 Mh/s, GPU1 18.990 Mh/s, GPU2 28.451 Mh/s

always get this. not matter the team viewer or anything.... i can send the log.
Are you sure they are exact make and model, same clock? Maybe the faster is samsung memory and the slower is elpida?  
thanks dude
i found it. on one card there is elpida on the other card is hynix memory....
sorry for my ignorance....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: cryptoc19 on April 17, 2016, 03:38:20 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: MacT on April 17, 2016, 03:41:49 PM
@Claymore, Is it suppose to be better on R9 380 (tonga) cards?

48 hours of testing on equal rigs and the original miner and yours are making pretty much the same result.

Right not after 10 hours of the new version vs original qtminer:

Ballance: 0.4717089107482806 vs 0.4826856692655387

miners changed lead several time but the biggest lead was around 0.01 Ether
So there is no point of using this miner in ETH only mode, also power consumption is a little higher.


 Most people are getting good gains with this miner with and without decred, a few are not. A new enhanced
qtminer seems to have come out today claiming 3-5% more hashrate, but only in ubuntu,


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 03:46:04 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: cryptoc19 on April 17, 2016, 03:48:27 PM
Do you have the same problem using other miners (not Claymore's) ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 17, 2016, 03:50:02 PM
I'm getting better results with this miner, compared to Genoil's or the Homestead versions.

My only problem is loosing 5% ETH shares when in dual mining mode.

But that might be related with the fact that I'm using a mix of 270x with 7950.

@Claymore, any progress optimizing your code for the 270x?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 03:50:59 PM
Do you have the same problem using other miners (not Claymore's) ?

etherminer, qtminer all works ok.

But the Claymore v2 doesn't work.

However, on ETH and DCR mining, i am getting very good results on ethermine.org with no invalids.
DCR however gives me 8-9% invalids -- but this is probably due to zpool stratum which I mine DCR,
because other DCR pools, reports lower invalids %

I have replaced qtminer.exe on all my rigs with Claymore's DM v2, even at dual mining mode I am getting very stable performance from my 390s.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: dominuspro on April 17, 2016, 04:04:05 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat  ::)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 04:14:50 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat  ::)

thanks dominuspro for the tip.....

... but still dont work for me  :(


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: dominuspro on April 17, 2016, 04:29:16 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat  ::)

thanks dominuspro for the tip.....

... but still dont work for me  :(

Mine 390 works without any problem on win7x64, crimson 15.12...
Everything reported properly poolside. It was allready with the first version of the miner.

bat file:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1


Code:
ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
 DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
 DCR: GPU0 479.955 Mh/s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 04:39:04 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat  ::)

thanks dominuspro for the tip.....

... but still dont work for me  :(

Mine 390 works without any problem on win7x64, crimson 15.12...
Everything reported properly poolside. It was allready with the first version of the miner.

bat file:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1


Code:
ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
 DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
 DCR: GPU0 479.955 Mh/s

hi dominuspro -- yes, it works!
had to wait for a few more minutes for its to show and visible now.
-ems 1 gave results "qtminer.exe mode" which is great because qtminer is better with stratum unlike get work method  by ethminer.exe


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: madmartyk on April 17, 2016, 05:07:57 PM
Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! :) ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

Mine are not showing up as well, but I swear it was working with 1.2 (maybe but I was drinking at the time)...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: revelacaogr on April 17, 2016, 06:48:45 PM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 17, 2016, 06:55:03 PM
Claymore

Dear friend! There is a good and profitable algorithm qubit, which little load cards like the ETH, what do you think about this? DCR very heavy card, so it gives only 20% of the single mode and the qubit will probably fall slightly in tandem with ETH, and possibly will not fall at all!

DGB-Qubit(DGB) is a good profit coin now http://www.whattomine.com

x13 and x15 little load cards so but not so profitable

Monero most little load but small profit


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 17, 2016, 06:56:01 PM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

same here - all good, zero invalids.... hard to believe...  ;D
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: revelacaogr on April 17, 2016, 07:14:00 PM
dcr pool.mn

2-2.5% invalid only
i have now 730 valid--18 invalid


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: revelacaogr on April 17, 2016, 07:30:18 PM
miner config:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe  -epool  eu1.ethermine.org:4444 -ewal 0x......  -epsw x -ethi 16 -esm 0  -dpool stratum+tcp://dcr.pool.mn:4800    -dwal ....... -dpsw ......... -dcri 20 -mode 0
pause


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: omnik on April 17, 2016, 07:49:03 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: AlexBoos on April 17, 2016, 08:38:43 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?

These coins are automatically supported. As in conventional miners.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: omnik on April 17, 2016, 08:40:24 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?

These coins are automatically supported. As in conventional miners.

It doesn't work... probably due to dev fee.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 17, 2016, 08:57:47 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?

Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 17, 2016, 09:01:03 PM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: omnik on April 17, 2016, 09:17:02 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?

Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?

You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)...
It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect.

Pls try it out: http://dwarfpool.com/exp


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Eliovp on April 17, 2016, 09:18:29 PM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).


I'm curious :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 17, 2016, 09:21:20 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?

Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?

You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)...
It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect.

Pls try it out: http://dwarfpool.com/exp

Ok I'll check it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ailikun on April 17, 2016, 09:58:03 PM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).


Can you port it to linux, too.
If its not a big problem.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: supersonic on April 17, 2016, 10:17:12 PM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

same here - all good, zero invalids.... hard to believe...  ;D
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.

Well those numbers are incorrect, because every time that it starts to mine for dev  the number of is reset when the worker reconnects to the pool - according to pool description on bottom of the page :>


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: supersonic on April 17, 2016, 10:20:27 PM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 17, 2016, 10:20:52 PM
Is that really need to 1-2 weeks for solo ver. Is that so hard to implement ? Your vers 2.0 is very nice already.  


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: forzendiablo on April 18, 2016, 12:05:26 AM
@Claymore

great job man!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 18, 2016, 12:24:48 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 18, 2016, 12:51:00 AM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

same here - all good, zero invalids.... hard to believe...  ;D
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.

Well those numbers are incorrect, because every time that it starts to mine for dev  the number of is reset when the worker reconnects to the pool - according to pool description on bottom of the page :>

there is also running total submitted shares, and that number is active - it could only mean that the miner is connected not disconnected.
 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 18, 2016, 01:02:24 AM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).


the v2 is very good Claymore - well done.

- any chance to improve the color used.... seems too dark
- solo mining features

thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: kanoptx on April 18, 2016, 01:15:28 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

how is this done? thx


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 18, 2016, 01:21:32 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

how is this done? thx

edit "start.bat" file

example from claymore start.bat .. notice i've added the clock settings in the syntax.
Quote
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x -wd 1 -cclock 1100 -mclock 1375

and read the "readme.txt" file you'll learn more  ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: phzi on April 18, 2016, 01:35:27 AM
edit "start.bat" file

example from claymore start.bat .. notice i've added the clock settings in the syntax.
Quote
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x -wd 1 -cclock 1100 -mclock 1375

and read the "readme.txt" file you'll learn more  ;)

That won't do anything... you need to prefix those lines with setx

e.g.
setx GPU_FORCE_64BIT_PTR 0


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 18, 2016, 01:38:58 AM
edit "start.bat" file

example from claymore start.bat .. notice i've added the clock settings in the syntax.

EDIT:
Quote
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x -wd 1 -cclock 1100 -mclock 1375

and read the "readme.txt" file you'll learn more  ;)

That won't do anything... you need to prefix those lines with setx

e.g.
setx GPU_FORCE_64BIT_PTR 0

yup, i forgot..copied it from the "readme.txt" file


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: rdnkjdi on April 18, 2016, 03:51:18 AM
You might get together with the guy from GPUShack who does Ethos.  I'm pretty sure you'd double or quadruple the hash fees you are getting from Windows overnight (and I'd be happy to be able to be able to watch my miner temps remotely)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: MacT on April 18, 2016, 04:26:40 AM
 Decred is down   to .0031 btc today. Is it still worth dual mining?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Twod on April 18, 2016, 06:27:43 AM
I decided yesterday to try dual miner version 2.0. Launched only for ETH, on RU stratum DwarfPool. Half day miner worked normally, sending the balls even slightly larger and more stable than Genoil. I decided to leave for the night, in the morning and checked to see that the floor one night were rejections. How can this problem be solved. It lacks konekt check with the server and switching to another server when the dump.
http://uploads.ru/ID8dj.png


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: supersonic on April 18, 2016, 06:44:23 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I didnt forget it, altho i was running it on stock settings that is 1070 cclock and 1550 mclock


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ldw-com on April 18, 2016, 06:59:56 AM
You might get together with the guy from GPUShack who does Ethos.  I'm pretty sure you'd double or quadruple the hash fees you are getting from Windows overnight (and I'd be happy to be able to be able to watch my miner temps remotely)

Or the other guy, with the FREE unix based os.

https://ethereum-mining.info/en/


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: jesterRPG on April 18, 2016, 08:04:37 AM
Everytime I set an overclock the program crashes. This is what's in my start.bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal 0x54DAcC4a74d5C75f0184E9093c210E6313ACc6Ed.cvke -epsw x -esm 1 -mode 1 -tt 60 -cclock 1100


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: avirdoz on April 18, 2016, 08:14:37 AM
I've tried v.2.0. Near 10% redjects on coinmine.pl - 5x r9 380, win7 64 bit, 15.12 AMD drivers


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: BogdanEraser on April 18, 2016, 08:20:16 AM
Mr.Claymore, can we expect separate temp control for all cards in rig? Cause for example i have in one rig 270x and 290 and now 270x temp is never go more than 70, and 290 temp is still on 81. So, setting -tt 80 wil cause 270x fans to be continuously switched on and off. Thanx.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: revelacaogr on April 18, 2016, 08:25:46 AM
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

without these comands i have more shares in decred (( same dcri )),a little more hashrate in eth (( 2-3%-same ethi ))  0 rejects in eth and 2-2,5% in dcr .....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 08:46:59 AM
I decided yesterday to try dual miner version 2.0. Launched only for ETH, on RU stratum DwarfPool. Half day miner worked normally, sending the balls even slightly larger and more stable than Genoil. I decided to leave for the night, in the morning and checked to see that the floor one night were rejections. How can this problem be solved. It lacks konekt check with the server and switching to another server when the dump.
http://uploads.ru/ID8dj.png

You can PM me the log with this problem, I will check it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 08:47:17 AM
Mr.Claymore, can we expect separate temp control for all cards in rig? Cause for example i have in one rig 270x and 290 and now 270x temp is never go more than 70, and 290 temp is still on 81. So, setting -tt 80 wil cause 270x fans to be continuously switched on and off. Thanx.

I will try to add it in next update.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Xdragon on April 18, 2016, 09:23:35 AM
I have 10% lower sharerate with this miner(-esm 2), than with original standalone qtminer.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 18, 2016, 10:27:26 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I didnt forget it, altho i was running it on stock settings that is 1070 cclock and 1550 mclock

or your 280x had elpida RAMS, read about the performance issue with that compared to 280x with hynix RAMS many months ago.

mine is hynix BTW.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: supersonic on April 18, 2016, 10:35:41 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I didnt forget it, altho i was running it on stock settings that is 1070 cclock and 1550 mclock

or your 280x had elpida RAMS, read about the performance issue with that compared to 280x with hynix RAMS many months ago.

mine is hynix BTW.
that would explain it, i have elpida on them
altho i changed clocks now to 1100/1375 as You suggested and its pulling 20mh now, thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 18, 2016, 10:56:16 AM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I didnt forget it, altho i was running it on stock settings that is 1070 cclock and 1550 mclock

or your 280x had elpida RAMS, read about the performance issue with that compared to 280x with hynix RAMS many months ago.

mine is hynix BTW.
that would explain it, i have elpida on them
altho i changed clocks now to 1100/1375 as You suggested and its pulling 20mh now, thanks!

read sometime ago that the hynix and elpida issue is a non-issue for ethereum mining, that would explain the 20mhs on both our cards, i think..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 18, 2016, 11:18:24 AM
I have 10% lower sharerate with this miner(-esm 2), than with original standalone qtminer.

I used "-esm 1" and starting dualminer, it flagged it at "qtminer mode"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: zorvalth on April 18, 2016, 11:23:25 AM
@Claymore, did you manage to take a look in the -cclock and -mclock flags, why they dont work? At least not on 7950 and R9 380..?

Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 11:29:59 AM
@Claymore, did you manage to take a look in the -cclock and -mclock flags, why they dont work? At least not on 7950 and R9 380..?

Thanks!

In current version -cclock and -mclock don't work if you did not specify "-tt" parameter. I've fixed it already, will be applied in next update. However, AMD disabled underclocking for some reason, so you can overclock only. I remember it worked in Catalyst v13.x but AMD added this stupid limitation in v14.x drivers. Right now I cannot underclock cards even via Crimson control panel, only overclock, you can check it too.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 11:31:26 AM
I've checked ETH forks - they will be supported in next update.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 18, 2016, 11:35:42 AM
@ Claymore: do you have a timeframe for the next release? How is your work on the older/weaker cards?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: zorvalth on April 18, 2016, 12:00:54 PM
@Claymore, did you manage to take a look in the -cclock and -mclock flags, why they dont work? At least not on 7950 and R9 380..?

Thanks!

In current version -cclock and -mclock don't work if you did not specify "-tt" parameter. I've fixed it already, will be applied in next update. However, AMD disabled underclocking for some reason, so you can overclock only. I remember it worked in Catalyst v13.x but AMD added this stupid limitation in v14.x drivers. Right now I cannot underclock cards even via Crimson control panel, only overclock, you can check it too.

Thanks, how does -tt works when it reach the set temp? Does it throttle or increasing the fans?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Xdragon on April 18, 2016, 12:11:33 PM
I have 10% lower sharerate with this miner(-esm 2), than with original standalone qtminer.

I used "-esm 1" and starting dualminer, it flagged it at "qtminer mode"

"-esm 1" is not working on coinmine.pl...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: merc84 on April 18, 2016, 12:26:11 PM
@Claymore, did you manage to take a look in the -cclock and -mclock flags, why they dont work? At least not on 7950 and R9 380..?

Thanks!

In current version -cclock and -mclock don't work if you did not specify "-tt" parameter. I've fixed it already, will be applied in next update. However, AMD disabled underclocking for some reason, so you can overclock only. I remember it worked in Catalyst v13.x but AMD added this stupid limitation in v14.x drivers. Right now I cannot underclock cards even via Crimson control panel, only overclock, you can check it too.

Glad someone else noticed this it was driving me crazy i had to flash 5 280x bios to get 1000/1250 clocks.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 18, 2016, 12:27:13 PM
I have 10% lower sharerate with this miner(-esm 2), than with original standalone qtminer.

I used "-esm 1" and starting dualminer, it flagged it at "qtminer mode"

"-esm 1" is not working on coinmine.pl...

ok i see.... on ethermine.org it works like a champ -- 0% rejects whole day


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: merc84 on April 18, 2016, 01:19:23 PM
Claymore can you please add setting for static fan speed if its not too much trouble :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 01:59:01 PM
Claymore can you please add setting for static fan speed if its not too much trouble :)

Ok.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Mrga666 on April 18, 2016, 02:36:50 PM
Dear Claymore, can u make other dual miners aswell?
Like for example etherium + feathercoin, they are both at the top of mining currency atm for gpu.

Thanks for your work


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: AlexBoos on April 18, 2016, 02:39:21 PM
Day worked in the new version. there were no refusals. But the speed of Ether on 15-20% less than in the previous version. Tried different complexity. Did not help. He left the farm to work in the previous version.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Beachguy on April 18, 2016, 03:03:57 PM
Thought I would get things working with a single HD 7950 2gb. Have two R9 270X 4gb on the way.
When adding :

"GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100"

The miner loads but says none of the cl commands are recognized.
Then the dag file buffer cannot be created and dag file runs out of space.

I've searched and searched. it seems to be connected to a memory limit on the card. One that would be corrected by the commands above.
bTW AMD drivers are 15.12

At this point I'm out of ideas.
Thanks for nay help or opinions.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 18, 2016, 03:08:57 PM
Thought I would get things working with a single HD 7950 2gb. Have two R9 270X 4gb on the way.
When adding :

"GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100"

The miner loads but says none of the cl commands are recognized.
Then the dag file buffer cannot be created and dag file runs out of space.

I've searched and searched. it seems to be connected to a memory limit on the card. One that would be corrected by the commands above.
bTW AMD drivers are 15.12

At this point I'm out of ideas.
Thanks for nay help or opinions.

The bat file must include:

Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

Good luck


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alexcrys on April 18, 2016, 03:21:57 PM
Claymore pls, can you make other dual miners aswell?
For example etherium + feathercoin(NeoScrypt) or Qubit,nicehash etc.. so it is possible ?

Thanks for your work  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 18, 2016, 03:34:57 PM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Paractor on April 18, 2016, 03:35:07 PM
Claymore pls, can you make other dual miners aswell?
For example etherium + feathercoin(NeoScrypt) or Qubit,nicehash etc.. so it is possible ?

Thanks for your work  ;D

Ethereum + feathercoin might not be a good idea. Both algorithms use a lot of memory access. qubit might be OK.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: citronick on April 18, 2016, 04:15:27 PM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D

Support!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: gghost on April 18, 2016, 04:31:00 PM
Claymore can you please add setting for static fan speed if its not too much trouble :)

Ok.

I'll never complain about adding new features but is there a reason for wanting to control GPU speeds and fans through the mining program compared to just using MSI Afterburner?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 04:35:16 PM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D

I don't want to work with proxies, so the miner will work with ETH client directly, it will take some time to implement it. I will do it soon, but not today :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 18, 2016, 05:35:37 PM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D

I don't want to work with proxies, so the miner will work with ETH client directly, it will take some time to implement it. I will do it soon, but not today :)

I see it now. Thank you.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Beachguy on April 18, 2016, 05:36:00 PM
The bat file must include:

Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

Good luck

Thank you for this. I'm working so it took a little longer.
Made the changes and the first time same result, the set X commands worked. But dag file (even though I had cleared both) still had buffer size problems.
 I cleared again and shut down and rebooted system (I had read somewhere that changes to the bat file a restart was needed)

It not only started with miners connecting and now showing work (connected before but didn't start hashing).......
but the dag files both built 100%

Everything is stock on gPU and out of the box basic on the miner software.
eth speed 11.23 mh
dcr 168.2 mh

Running over an hour and 0 rejects.

At this point I wasn't so concerned with speed but getting everthing working
After I get the two R9 270X 4 GB in ...we'll start some tweaks.
Again,....Thank you so much for your help!  8)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: melloyellow on April 18, 2016, 06:42:35 PM
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

These don't need to be in your bat file every time you start the miner.  They only need to be run once.  Whenever I have to reinstall windows I just run them in a separate .bat by themselsves.

You can check if they stick by right clicking on the start icon-->System-->Advanced system settings-->Environment Variables

Also, I've always used GPU_FORCE_64BIT_PTR 1, so probably doesn't matter for this miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: melloyellow on April 18, 2016, 06:47:35 PM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D

I don't want to work with proxies, so the miner will work with ETH client directly, it will take some time to implement it. I will do it soon, but not today :)

If I'm reading this right, we will have to run an eth client on each miner if we want to mine solo?  I was looking forward to your single instance proxy (not to mine solo) but I guess that's off the table now...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: aistto on April 18, 2016, 07:04:48 PM
Mr. Claymore
Miner suddenly stops after 2-3 hours. I send log to PM. Please check it.

I can'n make it stable.

Win 10,
cat 15.12
4*390 + 2*280x
8Gb RAM
8Gb VirtMem
DualMiner v2.0


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ariliz on April 18, 2016, 08:40:33 PM

this is normal?



ETH: 04/18/16-23:26:54 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
DevFee: ETH: Stratum - connecting to 'eu1.nanopool.org' <198.211.124.56> port 9999
DevFee: ETH: Stratum - Connected
Authorized
DevFee: start mining
DevFee: ETH: 04/18/16-23:28:53 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
DevFee: ETH: 04/18/16-23:29:06 - New job (target 0x00000000dbe6fece) from eu1.nanopool.org:9999
DevFee: ETH: 04/18/16-23:29:23 - New job (target 0x00000000dbe6fece) from eu1.nanopool.org:9999
DevFee: stop mining and disconnect
ETH: 04/18/16-23:29:38 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/18/16-23:29:41 - SHARE FOUND - (GPU 1)
ETH: Share accepted!
ETH: 04/18/16-23:29:45 - SHARE FOUND - (GPU 1)
ETH: Share accepted!
ETH: 04/18/16-23:32:44 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/18/16-23:35:43 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
ETH: 04/18/16-23:35:59 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
ETH: 04/18/16-23:36:21 - SHARE FOUND - (GPU 1)
ETH: Share accepted!
ETH: 04/18/16-23:37:06 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/18/16-23:39:27 - SHARE FOUND - (GPU 0)
ETH: Share accepted!



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 08:47:37 PM

this is normal?



ETH: 04/18/16-23:26:54 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
DevFee: ETH: Stratum - connecting to 'eu1.nanopool.org' <198.211.124.56> port 9999
DevFee: ETH: Stratum - Connected
Authorized
DevFee: start mining
DevFee: ETH: 04/18/16-23:28:53 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
DevFee: ETH: 04/18/16-23:29:06 - New job (target 0x00000000dbe6fece) from eu1.nanopool.org:9999
DevFee: ETH: 04/18/16-23:29:23 - New job (target 0x00000000dbe6fece) from eu1.nanopool.org:9999
DevFee: stop mining and disconnect
ETH: 04/18/16-23:29:38 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/18/16-23:29:41 - SHARE FOUND - (GPU 1)
ETH: Share accepted!
ETH: 04/18/16-23:29:45 - SHARE FOUND - (GPU 1)
ETH: Share accepted!
ETH: 04/18/16-23:32:44 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/18/16-23:35:43 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
ETH: 04/18/16-23:35:59 - SHARE FOUND - (GPU 2)
ETH: Share accepted!
ETH: 04/18/16-23:36:21 - SHARE FOUND - (GPU 1)
ETH: Share accepted!
ETH: 04/18/16-23:37:06 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/18/16-23:39:27 - SHARE FOUND - (GPU 0)
ETH: Share accepted!



Looks like a pool hangs on some block. If the problem is in miner, pool must reject old shares, but it responds "accepted", so the problem is on pool's side. Anyway, PM me the log file, I will check it. I will also add check so if miner gets same job for a long time it disconnects from the pool because it hangs.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 08:56:44 PM
I get disconnects from nanopool right now so they are doing something with the pool. It seems I really need to add failover asap, probably I will add it in next update.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ariliz on April 18, 2016, 08:58:32 PM
after restart miner everything is normal


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ariliz on April 18, 2016, 09:12:14 PM
problem in your miner. usual. everything is normal


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 09:35:38 PM
problem in your miner. usual. everything is normal

You can check the log, pool sends the same header (job) for a long time:

23:01:14:327   16cc   got 243 bytes
23:01:14:338   16cc   buf: {"id":0,"jsonrpc":"2.0","result":["0x56c1b889948349b145171845df85cbaae42e2052393518da6e68fe4c652a27f3","0x013d5197a3a035144a79e3e09dfec2505039ed176d81a0957e229886ddbee49b","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

......

23:43:57:438   16cc   got 243 bytes
23:43:57:451   16cc   buf: {"id":0,"jsonrpc":"2.0","result":["0x56c1b889948349b145171845df85cbaae42e2052393518da6e68fe4c652a27f3","0x013d5197a3a035144a79e3e09dfec2505039ed176d81a0957e229886ddbee49b","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}
 
42 minutes it sends the same job. Moreover, it accepts shares for this job all the time:

23:09:02:904   16cc   got 36 bytes
23:09:02:912   16cc   buf: {"id":4,"jsonrpc":"","result":true}
23:09:02:922   16cc   parse packet: 36
23:09:02:940   16cc   ETH: Share accepted!

.....

23:40:44:596   16cc   send: {"id":4,"method":"eth_submitWork","params":["0x75e8cb19ab613cb4","0x56c1b889948349b145171845df85cbaae42e2052393518da6e68fe4c652a27f3","0xfc152e9f3155f53c75a270b7db26d6b63fec19c54318a49ec1513246cf14479e"]}
23:40:44:725   16cc   got 36 bytes
23:40:44:728   16cc   buf: {"id":4,"jsonrpc":"","result":true}
23:40:44:728   16cc   parse packet: 36
23:40:44:737   16cc   ETH: Share accepted!

The problem is not in my miner. The only problem with my miner is that it should understand that entire pool (or at least its thread that serves you) hangs and disconnect, I will add it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ariliz on April 18, 2016, 09:45:54 PM
 :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Strannik-74 on April 18, 2016, 10:26:56 PM
:)

All works, and you do not have ... The problem miners, or in you ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: supersonic on April 18, 2016, 10:42:58 PM
@Claymore
so far so good im quite happy 15h straight without major problems, keep up the good work
only problem so far was crashing while i tried changing cclock and mclock(no matter if over or underclock), and not showing reported hashrate on ethermine.org only effective current hashrate is visible even after adding worker name and changing esm to 1
-tt works ok, after some time it stabilizes fans speed


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 18, 2016, 11:17:43 PM
@Claymore
so far so good im quite happy 15h straight without major problems, keep up the good work
only problem so far was crashing while i tried changing cclock and mclock(no matter if over or underclock), and not showing reported hashrate on ethermine.org only effective current hashrate is visible even after adding worker name and changing esm to 1
-tt works ok, after some time it stabilizes fans speed

"-esm 1" works, miner must write "qtminer mode" during start. Just wait some time (an hour) and pool will show info about shares. Check this topic a few pages ago there was same problem and it was solved.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Prelude on April 19, 2016, 01:38:20 AM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D

I don't want to work with proxies, so the miner will work with ETH client directly, it will take some time to implement it. I will do it soon, but not today :)

I don't think any serious solo miner is going to mine without a proxy. I've got 2GH spread across 14 rigs, I need the detailed statistics, simplification,  and features that EtherProxy by Sammy007 provides. Why wouldn't you want to support that? Would it prevent your miner from mining for the dev fee? Without the proxy support, I'm pretty sure I won't be alone in not using your miner to solo, unfortunately.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 19, 2016, 02:39:00 AM
Why not release a solo ver if 2.0 working well ? Problems with devfee ? Problems with accepted blocks ? I don't get it. Solo is a real decentralization! Don't feed a Troll Pool, feed the dev  :D

I don't want to work with proxies, so the miner will work with ETH client directly, it will take some time to implement it. I will do it soon, but not today :)

I don't think any serious solo miner is going to mine without a proxy. I've got 2GH spread across 14 rigs, I need the detailed statistics, simplification,  and features that EtherProxy by Sammy007 provides. Why wouldn't you want to support that? Would it prevent your miner from mining for the dev fee? Without the proxy support, I'm pretty sure I won't be alone in not using your miner to solo, unfortunately.

If he implement json api for remote monitoring like in cgminer the proxy would be not necessary.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: phzi on April 19, 2016, 05:49:31 AM
@Claymore
so far so good im quite happy 15h straight without major problems, keep up the good work
only problem so far was crashing while i tried changing cclock and mclock(no matter if over or underclock), and not showing reported hashrate on ethermine.org only effective current hashrate is visible even after adding worker name and changing esm to 1
-tt works ok, after some time it stabilizes fans speed

"-esm 1" works, miner must write "qtminer mode" during start. Just wait some time (an hour) and pool will show info about shares. Check this topic a few pages ago there was same problem and it was solved.

I think people are talking about the eth_submitHashrate stratum method that eth-proxy supports.  Ethermine/ethpool and mph (maybe others) will show your "reported hashrate," as in, reported by the mining software.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Gagana on April 19, 2016, 09:04:28 AM
@Claymore

Mr. Claymore, it looks like your miner detects GPUs in the different order than MSI Afterburner. Is it correct? Could you, please, synchronize your method? It is not convenient to control what's happening with cards now.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: merc84 on April 19, 2016, 09:50:52 AM
Potential work around for not being able to underclock (untested) install 13.x driver and place 15.12 opencl dll's in folder with miner please someone feel free to test.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alevlaslo on April 19, 2016, 10:18:32 AM
Supernova is good pool now, stratum working correct


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: alexcrys on April 19, 2016, 10:55:13 AM
Supernova is good pool now, stratum working correct
are you sure? for me is not working.. start miner 7 share and stay there no more share


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: groggin on April 19, 2016, 11:52:02 AM
 

  is there any alternative to the Crimson driver that works?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 19, 2016, 12:00:18 PM


  is there any alternative to the Crimson driver that works?

I've tried all the latest version of the AMD drivers and the best combo is Win 7 x64 + 15.12 Catalyst drivers.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: shubell on April 19, 2016, 12:01:51 PM
I am using 15.8 beta. I had some issues with the 15.12 and this version works great.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 19, 2016, 12:19:14 PM
Claymore, do you heard about Gapcoin ? It's some sort of similar like Primecoin for science.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: revelacaogr on April 19, 2016, 12:20:03 PM


  is there any alternative to the Crimson driver that works?

I've tried all the latest version of the AMD drivers and the best combo is Win 7 x64 + 15.12 Catalyst drivers.


for me the best combo also....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 19, 2016, 12:25:02 PM
Claymore, do you heard about Gapcoin ? It's some sort of similar like Primecoin for science.

I know that there is such coin, but I did not check any details.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Claymore on April 19, 2016, 12:25:25 PM
Got a good speedup for weak cards for both eth and eth+dcr modes and a small speedup for fast cards, I will release next version of the miner with a lot of improvements within 24 hours.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 19, 2016, 12:29:18 PM
Got a good speedup for weak cards for both eth and eth+dcr modes and a small speedup for fast cards, I will release next version of the miner with a lot of improvements within 24 hours.

Great news! I'll gladly keep paying the devfee from my increased shares  ;D

Keep up the good work.

Cheers!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 19, 2016, 12:33:04 PM
I want to pay devfee only dev not the pools for payout-rejects-fee  :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: merc84 on April 19, 2016, 12:43:49 PM


  is there any alternative to the Crimson driver that works?

I've tried all the latest version of the AMD drivers and the best combo is Win 7 x64 + 15.12 Catalyst drivers.

You can install any driver that supports your card, and simply put the amd opencl dll's from 15.12 into the folder with the miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: arielbit on April 19, 2016, 12:58:49 PM
I want to pay devfee only dev not the pools for payout-rejects-fee  :D

makes sense, if claymore prioritizes solo mining with the dual miner he could take a chunk off fees from pools..

the incentive is there mr claymore ;) besides unlike other coins out there, ethereum is in a way designed to be solo mined.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 19, 2016, 01:22:03 PM
I want to pay devfee only dev not the pools for payout-rejects-fee  :D

makes sense

Yeah, i know what i'm talking. 2 month of solo can't lie  :D By the way i just found a block on my 3x970 in solo but of course on ethminer.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: merc84 on April 19, 2016, 01:36:58 PM
Ethereum devs need to fix problem with win7 losing peers on geth before i can even consider solo mining :( no point soloing when geth drops eventually to 0 peers.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: Trimegistus on April 19, 2016, 01:39:15 PM

Yeah, i know what i'm talking. 2 month of solo can't lie  :D By the way i just found a block on my 3x970 in solo but of course on ethminer.

I never tried to solo mine ether but the idea of keeping to myself what is now being paid to Dwarf's is very appealing.

What would be the minimum hashpower to solo mine?

Currently I have two 60 MHs rigs and my 13 MHs PC. would that suffice?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: groggin on April 19, 2016, 01:49:06 PM
I am using 15.8 beta. I had some issues with the 15.12 and this version works great.

 thank you all for your responses   :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: melloyellow on April 19, 2016, 02:51:53 PM
Ethereum devs need to fix problem with win7 losing peers on geth before i can even consider solo mining :( no point soloing when geth drops eventually to 0 peers.

This fixed that problem for me, although I'm on W10

--cache=128 --maxpeers "25"

Give it a shot.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: ldw-com on April 19, 2016, 02:53:54 PM
Ethereum devs need to fix problem with win7 losing peers on geth before i can even consider solo mining :( no point soloing when geth drops eventually to 0 peers.

This fixed that problem for me, although I'm on W10

--cache=128 --maxpeers "25"

Give it a shot.

As well as making sure that you're synced with a timeserver. Muchos Importantč :p


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: madmartyk on April 19, 2016, 03:00:58 PM

I am using 15.8 beta. I had some issues with the 15.12 and this version works great.

I have 2 miners going, the one with 2 280x cards is on 15.12, I have a 290x in another PC on 16.150.2211.0 working fine as well.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: qqqq on April 19, 2016, 03:07:40 PM

Yeah, i know what i'm talking. 2 month of solo can't lie  :D By the way i just found a block on my 3x970 in solo but of course on ethminer.

I never tried to solo mine ether but the idea of keeping to myself what is now being paid to Dwarf's is very appealing.

What would be the minimum hashpower to solo mine?

Currently I have two 60 MHs rigs and my 13 MHs PC. would that suffice?

Actually it has no minimum hashpower required for any coin it's just a matter of your patience, if it works ok (i mean wallet). That's http://badmofo.github.io/ethereum-mining-calculator/ a good place you can get prediction of finding a block according to your hashpower. I found a block with ~50 mhs for week. It has a minus - you can miss the good pump of ETH while you soloing (Is that right word, is that even exist?) The plus, no fee-rejects-stealbythepools ))


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 19, 2016, 04:12:55 PM
v3.0:

- improved Ethereum mining speed by 1-15% (depends on mining mode and card model, slower card - more speed improvement).
- added "-etha" option to select Ethereum algorithm optimized for your cards.
- added "-allcoins" option to support Ethereum forks mining.
- miner checks all Ethereum shares before sending them to the pool. You will be warned if some GPU finds invalid share, usually due to overclocking.
- miner disconnects from the pool if there are not any new jobs for a long time.
- "-tt" option now can set target temperature for every card individually.
- "-tt" option now can set static fan speeds.
- fixed issue with -cclock and -mclock options. However, AMD blocked underclocking for some reason, you can overclock only.
- option "-wd 1" is set by default now.
- option "-ethi" for values less than "4" now sets very low GPU load to avoid any freezes in Windows. The most low GPU load is "-ethi 0".
  Also "-ethi" now can set intensity for every card individually.
  You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" value that is used in official miner.
- Bug fixes.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: madmartyk on April 19, 2016, 04:23:11 PM
Running!!!  A slight speed increase on the 280x's


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: revelacaogr on April 19, 2016, 04:39:32 PM
i have 5% increase in eth!

well done !
U diserve the fee....
thks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: citronick on April 19, 2016, 04:46:12 PM
 what the meaning of "--farm-recheck 600" again?

Note: I googled it but couldn't find a good answer - any experts out there?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: revelacaogr on April 19, 2016, 05:15:24 PM
dcr pool.mn  0.3% rejects


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: sakuleo on April 19, 2016, 05:23:02 PM
its recomended rebuild DAG files for new miner?
i am using 16.4.1 hf drivers report me a increase of hashrate, some one else have the same results? in compare to 15.2 drivers


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: dominuspro on April 19, 2016, 05:26:04 PM
v3.0:

- improved Ethereum mining speed by 1-15% (depends on mining mode and card model, slower card - more speed improvement).
- added "-etha" option to select Ethereum algorithm optimized for your cards.
- added "-allcoins" option to support Ethereum forks mining.
- miner checks all Ethereum shares before sending them to the pool. You will be warned if some GPU finds invalid share, usually due to overclocking.
- miner disconnects from the pool if there are not any new jobs for a long time.
- "-tt" option now can set target temperature for every card individually.
- "-tt" option now can set static fan speeds.
- fixed issue with -cclock and -mclock options. However, AMD blocked underclocking for some reason, you can overclock only.
- option "-wd 1" is set by default now.
- option "-ethi" for values less than "4" now sets very low GPU load to avoid any freezes in Windows. The most low GPU load is "-ethi 0".
  Also "-ethi" now can set intensity for every card individually.
  You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" value that is used in official miner.
- Bug fixes.

You are crazy ;)

r9 390 at 1150Mhz(with the profit calc...):

dcri   ETH [Mh]   DCR [Mh]   ETH profit  [$]   DCR profit  [$]   total profit  [$]
30   33.09   496   4.37   0.79   5.16
35   33.04   578   4.36   0.92   5.28
40   32.94   658   4.35   1.05   5.39
42   32.90   690   4.34   1.10   5.44
44   32.87   723   4.34   1.15   5.49
45   32.80   738   4.33   1.17   5.50
50   31.70   790   4.18   1.25   5.44
55   31.27   860   4.13   1.37   5.49
60   30.00   900   3.96   1.43   5.39
70   27.90   980   3.68   1.56   5.24
100   23.00   1150   3.04   1.83   4.86



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: bensam1231 on April 19, 2016, 05:41:26 PM
v3.0:

- improved Ethereum mining speed by 1-15% (depends on mining mode and card model, slower card - more speed improvement).
- added "-etha" option to select Ethereum algorithm optimized for your cards.
- added "-allcoins" option to support Ethereum forks mining.
- miner checks all Ethereum shares before sending them to the pool. You will be warned if some GPU finds invalid share, usually due to overclocking.
- miner disconnects from the pool if there are not any new jobs for a long time.
- "-tt" option now can set target temperature for every card individually.
- "-tt" option now can set static fan speeds.
- fixed issue with -cclock and -mclock options. However, AMD blocked underclocking for some reason, you can overclock only.
- option "-wd 1" is set by default now.
- option "-ethi" for values less than "4" now sets very low GPU load to avoid any freezes in Windows. The most low GPU load is "-ethi 0".
  Also "-ethi" now can set intensity for every card individually.
  You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" value that is used in official miner.
- Bug fixes.

Nvidia support?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ralfs on April 19, 2016, 05:44:12 PM
Anybody been able to mine ETH at Suprnova with this dual miner? DCR is functioning fine there, but not a single ETH share is reported in my account. The miner says it's stratum connected and submitting shares.. Have not been able to mine EXP at Suprnova.cc too. Any help would be appreciated.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: DaveyJones on April 19, 2016, 05:44:13 PM
I cannot get it to run since version 2.0 ( same for 3.0 ) ... besides the updated miner everything else is the same even the .bat files i start with which work great with 1.2. When i run it through CMD it prompts the parameters and does nothing at all leaving me with the same blinking console interface as before the start. Win7 64 , Tri-x 290 , 15.12 Crimson


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: madmartyk on April 19, 2016, 05:45:58 PM
Anybody been able to mine ETH at Suprnova with this dual miner? DCR is functioning fine there, but not a single ETH share is reported in my account. The miner says it's stratum connected and submitting shares.. Have not been able to mine EXP at Suprnova.cc too. Any help would be appreciated.

I couldn't get it to work at suprnova as well. but it works great at ethermining.org!!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 05:59:16 PM
@Claymore:

What exactly is the effect of the "-etha" option on mixed rigs? I have a mix of 270x, 7870 and 7950. Are these all slow or are the 7950 "fast" for being Tahiti?

Or is it better to leave the miner in the default configuration to autodetect the optimal settings?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 19, 2016, 06:05:59 PM
As far as I understand, Suprnova does not support Stratum for Ethereum. They mention Stratum on their help page, but all their addresses contain "http".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 19, 2016, 06:08:30 PM
@Claymore:

What exactly is the effect of the "-etha" option on mixed rigs? I have a mix of 270x, 7870 and 7950. Are these all slow or are the 7950 "fast" for being Tahiti?

Or is it better to leave the miner in the default configuration to autodetect the optimal settings?


If you are in doubts, you can check both "-etha 0" and "-etha 1" on your cards and select the mode with best speed, it will not take a lot of time because you can see speed for every GPU. By default miner tries to select best mode but it can be wrong in some cases (if you have middle cards) because I don't have all possible cards for tests.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Beachguy on April 19, 2016, 06:12:40 PM
@Claymore:

What exactly is the effect of the "-etha" option on mixed rigs? I have a mix of 270x, 7870 and 7950. Are these all slow or are the 7950 "fast" for being Tahiti?

Or is it better to leave the miner in the default configuration to autodetect the optimal settings?


I just installed, cleared my dag files. Left everything default.
Miner started in etha -1 for slower cards. (auto is default)
results
asus R9 270X 2 gb 13.327 to 13.308
msi HD 7850  2 gb 12.283 to 12.600

mining at ethermine.org and mining ethereum only

So I'm kind of meh.
New to ethereum mining ( but to gpu mining and tweaks that can be done) in just last few days.
Going to try some different pools and such.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: DaveyJones on April 19, 2016, 06:13:01 PM
I cannot get it to run since version 2.0 ( same for 3.0 ) ... besides the updated miner everything else is the same even the .bat files i start with which work great with 1.2. When i run it through CMD it prompts the parameters and does nothing at all leaving me with the same blinking console interface as before the start. Win7 64 , Tri-x 290 , 15.12 Crimson

Any clue why it throws me back without showing any error or something with the latest 2 versions? i also tried your own start.bat to fix selfmade typing mistakes ....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 06:46:22 PM
My 270x are loosing 1%-5% performance with this new version. The same for 7870  :-[

My 7950s are gaining 5%  8)

Final balance: Not worth the change, at least not with default settings.

Tried -ethi -8192 but it was even worst.

Maybe I'll try to run simultaneous instances; one for the 7950s another for the 270s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 19, 2016, 07:00:05 PM
My 270x are loosing 1%-5% performance with this new version. The same for 7870  :-[

My 7950s are gaining 5%  8)

Final balance: Not worth the change, at least not with default settings.

Tried -ethi -8192 but it was even worst.

Maybe I'll try to run simultaneous instances; one for the 7950s another for the 270s

I tested v2.0 and v3.0 on stock 270 and v3.0 is faster in both dual and non-dual modes:
v2.0: mode -0 11.5MH, mode -1 12.8MH.
v3.0: mode -0 13.2MH, mode -1 13.5MH.

Probably you use not 15.12 drivers.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: madmartyk on April 19, 2016, 07:05:06 PM
On the 290x the speed was the same with the 15.12 and the 16.12 drivers.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: crazyearner on April 19, 2016, 07:06:55 PM
Not sure if am seeing any value to mining both the coins. I maybe make a little DCR a day maybe 1 coin if that. Is this worth the extra power it is using and giving rejected ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 07:07:01 PM

I tested v2.0 and v3.0 on stock 270 and v3.0 is faster in both dual and non-dual modes:
v2.0: mode -0 11.5MH, mode -1 12.8MH.
v3.0: mode -0 13.2MH, mode -1 13.5MH.

Probably you use not 15.12 drivers.

My rigs are optimized with Win 7 x64 and Catalyst 15.12. Trust me, I've tried more than once. But it not a big problem; I'm now running one instance for the 950s with V3 and another instance with V2 for the 270x

Note: I have 5 absolutely identical MSI 270x and they all produce different speeds. Go figure...  ???


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 07:08:22 PM
Not sure if am seeing any value to mining both the coins. I maybe make a little DCR a day maybe 1 coin if that. Is this worth the extra power it is using and giving rejected ?

I don't think so. I'm using this miner not because of DCR but because it produces better results in ETH single mode.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: thesaltonsea on April 19, 2016, 07:08:47 PM
Here with 3.0 im getting better results with 7950/7970 when dual mining, before it was lowering the eth, now when dual mining its stays close to the solo numbers :) With 2x 7950 and 1x 7970 im getting 61mh eth and 1200mh dcr. Good job Claymore :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Beachguy on April 19, 2016, 07:10:21 PM

I tested v2.0 and v3.0 on stock 270 and v3.0 is faster in both dual and non-dual modes:
v2.0: mode -0 11.5MH, mode -1 12.8MH.
v3.0: mode -0 13.2MH, mode -1 13.5MH.

Probably you use not 15.12 drivers.

Just got my other two cards in, pulled the asus R9 270X 2GB from the riser.
Plugged in a MSI R9 270X 4GB , cleared the DAGs, shutdown booted up
getting 14.5 MH on vers 3.
Just have to hook its brother up....(now where's those other risers)  :P

Starting to get there.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Gagana on April 19, 2016, 07:19:37 PM
How to understand, which particular card is GPU0 etc?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 07:20:20 PM

Just got my other two cards in, pulled the asus R9 270X 2GB from the riser.
Plugged in a MSI R9 270X 4GB , cleared the DAGs, shutdown booted up
getting 14.5 MH on vers 3.
Just have to hook its brother up....(now where's those other risers)  :P

Starting to get there.

I used the old DAGs to test v3. Could this be the reason? Hummmm.... Testing now!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: alevlaslo on April 19, 2016, 07:30:33 PM
Nаnо - i120, 28мх/1672мх
290Х (1018 core, 1250 mem) - i70, 27.9мх/976мх

driver 16.4.1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: jesterRPG on April 19, 2016, 07:43:44 PM
Why does the program crash when I try to apply overclocking? Please help.

EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal 0x54DAcC4a74d5C75f0184E9093c210E6313ACc6Ed -eworker rig1 -epsw x -esm 1 -mode 1 -tt 60 -cclock 1100


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 07:50:23 PM
As I suspected... DAG recreation won't improve V3 performance  :-[


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 07:51:27 PM
[
Plugged in a MSI R9 270X 4GB , cleared the DAGs, shutdown booted up
getting 14.5 MH on vers 3.

Starting to get there.

Are you using any special settings? Overclocking?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: olajos on April 19, 2016, 07:59:26 PM
Thanks for the speedup

2x380 1x290x

with v2
11:15:57:350   13fc   ETH - Total Speed: 66.403 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:02
11:15:57:355   13fc   ETH: GPU0 19.538 Mh/s, GPU1 18.453 Mh/s, GPU2 28.411 Mh/s
11:15:57:361   13fc    DCR - Total Speed: 664.028 Mh/s, Total Shares: 0, Rejected: 0
11:15:57:365   13fc    DCR: GPU0 195.380 Mh/s, GPU1 184.534 Mh/s, GPU2 284.114 Mh/s

with v3
21:58:24:128   21b4   ETH - Total Speed: 68.982 Mh/s, Total Shares: 27, Rejected: 0, Time: 00:35
21:58:24:135   21b4   ETH: GPU0 20.573 Mh/s, GPU1 20.089 Mh/s, GPU2 28.321 Mh/s
21:58:24:139   21b4    DCR - Total Speed: 689.822 Mh/s, Total Shares: 1, Rejected: 0
21:58:24:145   21b4    DCR: GPU0 205.728 Mh/s, GPU1 200.889 Mh/s, GPU2 283.205 Mh/s

both dcri 20


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Vegetablepin on April 19, 2016, 08:06:29 PM
Wow, such hash, many speed, very code.  :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: qqqq on April 19, 2016, 08:08:41 PM
Time to code for solo and fuck the pools  :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Batelk on April 19, 2016, 08:12:10 PM
Time to code for solo and fuck the pools  :D

I like the solo mining. But the geth is not working too well. After certain network disruption, it will just hang.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Eliovp on April 19, 2016, 08:15:11 PM
Mmm not seeing any improvements :(

6x Nano, stock settings(cards), 175Mh

V2 - 175 Mh/s
V3 - 175 Mh/s

Exactly the same :p


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: gaalx on April 19, 2016, 08:16:45 PM
Does Nvidia support is planned?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: McNulty on April 19, 2016, 08:22:32 PM
and failover ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 19, 2016, 08:30:02 PM
Nvidia - no. Failover - yes, in next release.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Strannik-74 on April 19, 2016, 08:35:53 PM
How to understand, which particular card is GPU0 etc?

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).

Use -di 0 and see which card is loaded, then use -di 01 and see what the new card has become loaded , etc.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: AlexBoos on April 19, 2016, 08:42:47 PM
Sehr gut!

Video cards a little more heated. So working as it should. Thank you for your release.  :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: thesaltonsea on April 19, 2016, 08:46:04 PM
Sehr gut!

Video cards a little more heated. So working as it should. Thank you for your release.  :)
Yep, here its +3-4C for the gpu and 6-7 for the VRM's when dual mining :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Beachguy on April 19, 2016, 09:15:25 PM
[
Plugged in a MSI R9 270X 4GB , cleared the DAGs, shutdown booted up
getting 14.5 MH on vers 3.

Starting to get there.

Are you using any special settings? Overclocking?


Sorry, working while trying to add third card, took me a while to get back.
Nothing special at all, only the switch to run 3 cards.
All box stock

The MSI R9 270X 4 gb running 14.605 ~ 14.610 each
The old MSI HD 7850 2 gb running 12.590~12.602

Man I wish I'd never sold the other three MSI HD 7850's, just had single 6 pin and seem to do oK mining ETH.
Running out of connectors to run these newer cards each two six pins.
Also, don't remember having to connect the risers to power....there goes another spot on the PSU.
BTW, PSU is Seasonic 850W Gold


@gagana - when the miner boots it identifies GPU "0" in the beggining...next software start look for it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Marvell1 on April 19, 2016, 09:59:43 PM
Nvidia - no. Failover - yes, in next release.

Finally got sick of ehhminer constanly dying and crashing my miners on the regular and tried this miner out and wow !

Im in love , now getting 180mhs for my six 390 card rig that i was testing for a while thats with an undervolt of 100mv

cards are running about 5 degrees hotter but each card hashes at 30mhs no lower.

Also it seems this miner is smarter if one card dies the miner does not hang it just keeps mining with the other 5 cards

this is good so now i can play around more with undervolted bioes going forward etc.

-two things
1)
All i need now is a way to use it with the solo mining proxy
https://forum.ethereum.org/discussion/3513/ethereum-mining-proxy/p1

2)
do your commands for lowering memory clock really work ? in MSI afterburner yo ucant really lower the memory clock . i mean it lets you but
the clocks do not go lower when you apply the settings.    For ethreum we can get better power usesage and temps if we can lower the mem clock
and a leave the core alone at least for newer AMD cards.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v2.0
Post by: o00o on April 19, 2016, 10:07:11 PM
@Claymore

Mr. Claymore, it looks like your miner detects GPUs in the different order than MSI Afterburner. Is it correct? Could you, please, synchronize your method? It is not convenient to control what's happening with cards now.

I experienced the same problem once I swapped cards from another rig despite using DDU and reinstalling drivers but managed to resolve it by invoking the -di option.  As an example, I've reordered my GPUs correctly with the following command: -di 102.




  is there any alternative to the Crimson driver that works?

15.7.1 delivers the highest performance for a wide variety of algorithms on my 290, 290x & 390x and has also proven to be the most stable meanwhile offering the highest overlcocking potential and does not introduce any screen artifacts.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 19, 2016, 10:08:58 PM

The MSI R9 270X 4 gb running 14.605 ~ 14.610 each
The old MSI HD 7850 2 gb running 12.590~12.602


Well, one of my 270x has always been running at 15,4 but it's a Sapphire Toxic, therefore not exactly a standard 270x.

The other ones, the Sapphire Dual-X, are only running at 13.2 MHs~13.9MHs no matter what miner I use.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: o00o on April 19, 2016, 10:21:03 PM
Nvidia - no. Failover - yes, in next release.

Finally got sick of ehhminer constanly dying and crashing my miners on the regular and tried this miner out and wow !

Im in love , now getting 180mhs for my six 390 card rig that i was testing for a while thats with an undervolt of 100mv

cards are running about 5 degrees hotter but each card hashes at 30mhs no lower.

Also it seems this miner is smarter if one card dies the miner does not hang it just keeps mining with the other 5 cards

this is good so now i can play around more with undervolted bioes going forward etc.

-two things
1)
All i need now is a way to use it with the solo mining proxy
https://forum.ethereum.org/discussion/3513/ethereum-mining-proxy/p1

2)
do your commands for lowering memory clock really work ? in MSI afterburner yo ucant really lower the memory clock . i mean it lets you but
the clocks do not go lower when you apply the settings.    For ethreum we can get better power usesage and temps if we can lower the mem clock
and a leave the core alone at least for newer AMD cards.



I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: avirdoz on April 19, 2016, 10:30:31 PM
Nice work. With v3.0 i have 100% eth hashrate + 33% dcr hashrate per card and near 0%/2% rejects respectively.
Are there any plans to add vcash (Blake algo) mining in dual mode?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: aimsml on April 19, 2016, 10:34:27 PM
Hello.
What is the problem?
The test rig 3 x r380x
1100 - core, memory - 1500
Hash rate high 64,7 MHs in miner, it does not send the shares. In 1 hour 40 sent the shares
Default settings.
Need help please.
P/S
Mode - -mode 1
Pool - ethpool.org


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Walrusbonzo on April 19, 2016, 10:42:33 PM
Awesome work!

Up from 66.5 mh/s to 70mh/s with 1 x 7970 and 2 x 7950 single mining Eth.

Just about to test it on my two 290x :D

EDIT: 290x have gone from 59mh/s overclocked to 59mh/s not overclocked. :)  This is all just miner reported hash rates at the moment, but early indications show far more accepted shares.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Termie on April 19, 2016, 10:53:35 PM
with your coinotron example I only get "Authorisation failed" - no mining possible.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 19, 2016, 11:45:53 PM
with your coinotron example I only get "Authorisation failed" - no mining possible.

Probably there is one more text line after that line in red, it contains something like "Wrongworkernameorpassword".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: almartins on April 20, 2016, 12:56:59 AM
Hi,

At Coinotron with this .bat file don't work:

timeout /t 15

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1

CMD windows is like thist:

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_FORCE_6
4BIT_PTR 0

ĘXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_MAX_HEA
P_SIZE 100

ĘXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_USE_SYN
C_OBJECTS 1

ĘXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>setx GPU_SINGLE_
ALLOC_PERCENT 100

ĘXITO: o valor especificado foi guardado.

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>EthDcrMiner64.ex
e -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1


╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v1.2 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 4
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
Total cards: 4

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...

What are your oppinion ?

Regards


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: McNulty on April 20, 2016, 01:10:33 AM
Nvidia - no. Failover - yes, in next release.

thx  :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Trimegistus on April 20, 2016, 01:14:42 AM

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1

What are your oppinion ?

Regards


Code:
almartins.PC-14

Are you sure this is the name of your worker?

Follow the instructions on the OP:

"-epsw    Password for Ethereum pool, use "x" as password."

Verifique o nome dos seus "workers" e a sua palavra passe. Tem a certeza que a palavra passe é "PC-14"?

Boa sorte!  ;)



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: sibout on April 20, 2016, 01:57:50 AM
Hi, Claymore! Thx for good work.
I have a card 7970m (Pitcairn) and I can't use it. Your miner says "GPU 0, GpuMiner k1 failed -48" and reboots own start. Howevever genoil miner successfully works and shows 15MHs. Could You explain this problem?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: rdnkjdi on April 20, 2016, 03:56:11 AM
Nvidia - no. Failover - yes, in next release.

Finally got sick of ehhminer constanly dying and crashing my miners on the regular and tried this miner out and wow !

Im in love , now getting 180mhs for my six 390 card rig that i was testing for a while thats with an undervolt of 100mv

cards are running about 5 degrees hotter but each card hashes at 30mhs no lower.

Also it seems this miner is smarter if one card dies the miner does not hang it just keeps mining with the other 5 cards

this is good so now i can play around more with undervolted bioes going forward etc.

-two things
1)
All i need now is a way to use it with the solo mining proxy
https://forum.ethereum.org/discussion/3513/ethereum-mining-proxy/p1

2)
do your commands for lowering memory clock really work ? in MSI afterburner yo ucant really lower the memory clock . i mean it lets you but
the clocks do not go lower when you apply the settings.    For ethreum we can get better power usesage and temps if we can lower the mem clock
and a leave the core alone at least for newer AMD cards.



Have you made any observation on the watt draw difference or heat difference that heavy of an undervolt?  My 390s are hogs - like 270W ...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Etayson on April 20, 2016, 04:31:53 AM
I have the same problem as DaveyJones. v3.0 not working for me.
When i run it through CMD it prompts the parameters and does nothing at all. No errors, no works, nothing.
Win7 x64, R9 380x,  Crimson 15.12 (Crimson 16.1)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Prelude on April 20, 2016, 04:58:23 AM
Tested 3.0, looking good. Increase on 7950/7970/280x/290/290x/390x for me.

Back to ethminer, however; looking forward to the solo version of this miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: dolinskii on April 20, 2016, 05:12:15 AM
Probably there is one more text line after that line in red, it contains something like "Wrongworkernameorpassword".

Is it possible to run the HD 6990? it would be great if somebody suggested how to do it ???
The following error swears on OpenCL

10:56:35:212   ac8   
10:56:35:212   ac8   ЙНННННННННННННННННННННННННННННННННННННННННННННННННННННННННННННННН»
10:56:35:212   ac8   є   Claymore's Dual Ethereum + Decred AMD GPU Miner  v3.0 Beta   є
10:56:35:228   ac8   ИННННННННННННННННННННННННННННННННННННННННННННННННННННННННННННННННј
10:56:39:978   ac8   
Cards available: 4
10:56:39:994   ac8   GPU #0: name: Cayman, 2048 MB available, 24 units
10:56:39:994   ac8   GPU #1: name: Cayman, 2048 MB available, 24 units
10:56:39:994   ac8   GPU #2: name: Cayman, 2048 MB available, 24 units
10:56:39:994   ac8   GPU #3: name: Cayman, 2048 MB available, 24 units
10:56:40:009   ac8   Total cards: 4
10:56:40:009   ac8   Initializing...

10:56:40:025   ac8   POOL version
10:56:40:025   ac8   b112
10:57:02:337   ac8   GPU #0: set -etha as 1 (ETH algo for slow cards)
10:57:02:337   ac8   GPU #1: set -etha as 1 (ETH algo for slow cards)
10:57:02:509   ac8   GPU #2: set -etha as 1 (ETH algo for slow cards)
10:57:02:525   ac8   GPU #3: set -etha as 1 (ETH algo for slow cards)
10:57:03:244   ac8   DUAL MINING MODE ENABLED: ETHEREUM+DECRED

10:57:03:322   d0c   ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
10:57:03:572   edc    DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
10:57:04:119   ac8   Decred HTTP requests time (-dcrt) is set to 10

10:57:04:119   ac8   miner-proxy stratum mode
10:57:04:134   ac8   "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
10:57:04:134   ac8   

10:57:04:228   edc   send: {"id": 1, "method": "mining.subscribe", "params": ["dcr 1.0"]}


10:57:04:228   edc   send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}


10:57:04:228   edc   send: {"id": 2, "method": "mining.authorize", "params": ["dolinskii.6990","x"]}


10:57:04:228   edc    DCR: Stratum - Connected
10:57:04:228   d0c   send: {"id": 1, "method": "mining.subscribe", "params": []}


10:57:04:244   d0c   send: {"id": 2, "method": "mining.authorize", "params": ["dolinskii.miner2","x"]}


10:57:04:244   d0c   ETH: Stratum - Connected
10:57:04:353   edc   got 593 bytes
10:57:04:353   edc   buf: {"error": null, "id": 1, "result": [["mining.notify", "ae6812eb4cd7735a302a8a9dd95cf71f"], "00000000f8031078f8031078", 12]}
{"params": [1], "id": null, "method": "mining.set_difficulty"}
{"params": ["3f27", "3bf1ef1276719f0b45fa1577a9af97aa85be40a036d743e900002b6f00000000", "d48bbb19612c566bb3a2570479a2ed8914ece5965e1e13b1fb7ff3e6291c84f7bdfbfdbcfea3d5c b74590b70e14ca9fb806ada63245a1f6f275c0e76e584638c0100d930c9bd79c004000000b1ab00 000acf2b1ad1dd09ec00000000a051000019070000e90b17570000000000000000", "", [], "01000000", "1a2bcf0a", "57170be9", true], "id": null, "method": "mining.notify"}

10:57:04:353   edc   parse packet: 116
10:57:04:353   edc   remove first packet 451
10:57:04:353   edc   new buf size: 451
10:57:04:353   edc   parse packet: 58
10:57:04:353   edc   remove first packet 393
10:57:04:353   edc   new buf size: 393
10:57:04:353   edc   parse packet: 393
10:57:04:353   edc   new buf size: 0
10:57:04:369   d0c   got 107 bytes
10:57:04:369   d0c   buf: {"error": null, "id": 1, "result": [["mining.notify", "1ead3d0dd7d04684a698f6a680bf876f"], "080033DC", 4]}

10:57:04:369   d0c   parse packet: 99
10:57:04:369   d0c   new buf size: 0
10:57:04:494   d0c   got 343 bytes
10:57:04:494   d0c   buf: { "id": null, "method": "mining.set_difficulty", "params": [55000]}
{"params": ["41755", "0x9d8dc43e021223e8e44ba06cbbc5b03a9cd46304ee18a0700e532f87c02ad713","0x013d5197a3a035144a79e3e09dfec2505039ed176d81a0957e229886ddbee49b","0x00000001310A508148DF1ECB62908D334643D83B47C1251FE95C3C06679770B6", true], "id": null, "method": "mining.notify"}

10:57:04:494   d0c   parse packet: 62
10:57:04:494   d0c   remove first packet 268
10:57:04:494   d0c   new buf size: 268
10:57:04:494   d0c   parse packet: 268
10:57:04:494   d0c   eth: job changed
10:57:04:494   d0c   new buf size: 0
10:57:04:556   3a8   Need to check DAG file (epoch #45), starting...

10:57:04:806   d0c   got 101 bytes
10:57:04:806   d0c   buf: {"error": null, "id": 2, "result": true}
{ "id": 9876, "method": "client.get_version", "params": []}

10:57:04:806   d0c   parse packet: 36
10:57:04:806   d0c   Authorized
10:57:04:806   d0c   remove first packet 54
10:57:04:806   d0c   new buf size: 54
10:57:04:806   d0c   parse packet: 54
10:57:04:806   d0c   send: {"error": null, "jsonrpc": "id": 9876, "result": "eth 1.0"}


10:57:04:806   d0c   new buf size: 0
10:57:11:634   d0c   got 275 bytes
10:57:11:634   d0c   buf: {"params": ["41758", "0xc447cb2844cc09fbc169c4e0a5b2c19ca0f7f592c6be5de6e8126e3c6c052881","0x013d5197a3a035144a79e3e09dfec2505039ed176d81a0957e229886ddbee49b","0x00000001310A508148DF1ECB62908D334643D83B47C1251FE95C3C06679770B6", true], "id": null, "method": "mining.notify"}

10:57:11:634   d0c   parse packet: 268
10:57:11:634   d0c   eth: job changed
10:57:11:634   d0c   new buf size: 0
10:57:11:634   d0c   ETH: 04/20/16-10:57:11 - New job (target 0x00000001310a5081) from coinotron.com:3344
10:57:11:634   d0c   ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
10:57:11:634   d0c   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
10:57:11:650   d0c    DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
10:57:11:650   d0c    DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
10:57:11:931   3a8   DAG file (epoch #45) is ok.

10:57:11:931   3a8   Need to check next DAG file (epoch #46) in background, starting...

10:57:11:931   3a8   Applying DAG epoch #45 for GPU #0
10:57:11:931   3a8   Create GPU buffer for GPU #0
10:57:11:931   3a8   OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

10:57:11:994   524   Applying DAG epoch #45 for GPU #1
10:57:11:994   524   Create GPU buffer for GPU #1
10:57:11:994   524   OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

10:57:11:994   e98   Applying DAG epoch #45 for GPU #2
10:57:12:009   e98   Create GPU buffer for GPU #2
10:57:12:009   e98   OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

10:57:12:009   db0   Applying DAG epoch #45 for GPU #3
10:57:12:009   db0   Create GPU buffer for GPU #3
10:57:12:025   db0   OpenCL error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

10:57:14:353   edc   got 488 bytes
10:57:14:353   edc   buf: {"error": null, "id": 5, "result": true}
{"error": null, "id": 2, "result": true}
{"params": ["4171", "3bf1ef1276719f0b45fa1577a9af97aa85be40a036d743e900002b6f00000000", "90e8447c0d4e07664d047b2ad87b44f6903f4d7b2b0736d54100d7df42a2592ccce6230d782a8fa cafa27c5a09c14fe66e3e1d16f9f15d6e3314b8f3f50507740100d930c9bd79c004000000b1ab00 000acf2b1ad1dd09ec00000000a0510000b20a0000250c17570000000000000000", "", [], "01000000", "1a2bcf0a", "57170c25", true], "id": null, "method": "mining.notify"}

10:57:14:353   edc   parse packet: 36
10:57:14:353   edc   remove first packet 429
10:57:14:353   edc   new buf size: 429
10:57:14:353   edc   parse packet: 36
10:57:14:353   edc   Authorized
10:57:14:353   edc   remove first packet 393
10:57:14:353   edc   new buf size: 393
10:57:14:353   edc   parse packet: 393
10:57:14:353   edc   new buf size: 0
10:57:14:369   edc    DCR: 04/20/16-10:57:14 - New job (target 0x00000000ffff0000, block #20896) from dcr.pool.mn:4800
10:57:14:931   994   Applying DAG epoch #45 for GPU #0
10:57:14:931   994   OpenCL error - cannot write big buffer with DAG

10:57:15:009   d80   Applying DAG epoch #45 for GPU #1
10:57:15:009   d80   OpenCL error - cannot write big buffer with DAG

10:57:15:009   be4   Applying DAG epoch #45 for GPU #2
10:57:15:009   be4   OpenCL error - cannot write big buffer with DAG

10:57:15:087   8dc   Applying DAG epoch #45 for GPU #3
10:57:15:103   8dc   OpenCL error - cannot write big buffer with DAG

10:57:34:322   ac8   watchdog - thread 0, hb time 19235
10:57:34:353   ac8   watchdog - thread 1, hb time 19235
10:57:34:353   ac8   watchdog - thread 2, hb time 19235
10:57:34:353   ac8   watchdog - thread 3, hb time 19235
10:57:34:353   ac8   watchdog - thread 4, hb time 19235
10:57:34:353   ac8   watchdog - thread 5, hb time 19235
10:57:34:353   ac8   watchdog - thread 6, hb time 19235
10:57:34:353   ac8   watchdog - thread 7, hb time 19235
10:57:34:369   ac8   WATCHDOG: GPU error, you need to restart miner :(
10:57:34:369   ac8   Restarting OK, exit...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: thesilex on April 20, 2016, 05:36:36 AM
Can someone please explain me how ethereum forks mining works? Is it possible to mine eth, dcr and exp all at the same time? Will fork mining be profitable?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: martorix on April 20, 2016, 06:01:52 AM
I'm testing this version at the moment and I have this little problem.

On a rig with 4 x 290x, when I start the miner it hashes with 115 Mh/s and then in a matter of seconds it drops to 107 Mh/s.
Apparently it starts with around 29 Mh/s for every card, and drops all but the one that has the monitor cable plugged in, to 26 Mh/s.
I'm using ETH only mode.

Any tips how to fix this ?  


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Jacques21 on April 20, 2016, 06:47:06 AM
just got my R9 295x2, gonna test it with this miner now.  ;D

My 390x went from 26 to 30.5 mh/s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: chup on April 20, 2016, 06:48:40 AM

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

Using 15.7.1 and Trixx? Are You sure it's underclocked? Checked in Trixx card info or GPU-Z?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ldw-com on April 20, 2016, 07:04:25 AM
Serious improvement on every card except my nano's.

So 280x's, 290's, 290x's, 390's and 390x's went up, and very nicely!

Nano's, no difference. Edit: Even worse. Exact same settings, lost 2mh eth and 200-300 Mh dcr. :(

Great job none the less!

Keep it up Claymore!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: thesaltonsea on April 20, 2016, 07:42:14 AM
Awesome work!

Up from 66.5 mh/s to 70mh/s with 1 x 7970 and 2 x 7950 single mining Eth.

Hi, im using the same cards , 2x 7950 and 1x7970 , but i get only 62mh ... Can you tell us your configs and card cloks please ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: almartins on April 20, 2016, 07:43:54 AM

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1

What are your oppinion ?

Regards


Code:
almartins.PC-14

Are you sure this is the name of your worker?

Follow the instructions on the OP:

"-epsw    Password for Ethereum pool, use "x" as password."

Verifique o nome dos seus "workers" e a sua palavra passe. Tem a certeza que a palavra passe é "PC-14"?

Boa sorte!  ;)



"Tenho a certeza absoluta ;)"

Yes, I'm sure my user name is "almartins" and worker name and password is "PC-14" but this miner don't work at coinotron pool :(.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: bradli on April 20, 2016, 07:59:40 AM

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1

What are your oppinion ?

Regards


Code:
almartins.PC-14

Are you sure this is the name of your worker?

Follow the instructions on the OP:

"-epsw    Password for Ethereum pool, use "x" as password."

Verifique o nome dos seus "workers" e a sua palavra passe. Tem a certeza que a palavra passe é "PC-14"?



Boa sorte!  ;)



"Tenho a certeza absoluta ;)"

Yes, I'm sure my user name is "almartins" and worker name and password is "PC-14" but this miner don't work at coinotron pool :(.


just put new worker with pass x in bat fail


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: maxkos on April 20, 2016, 08:01:28 AM
almartins, try to rename/replace "-" in your pass or workername, "PC-14" = "PC14"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: palgin on April 20, 2016, 08:01:58 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

2. Set desired memory clock setting (for each card if they're different in your rig) and hit apply, save these settings at the first profile and check "apply overclocking at system startup" box. Now, if you run GPU-Z, you'll see lowered clocks at the "Graphics Card" tab, but if you check "Sensors" tab, you'll see that memory clocks remain the same, nothing has been lowered actually.

3. OK, go back to MSI Afterburner, go to Settings and ENABLE "Unofficial Overclocking Mode" without PowerPlay feature and hit OK. Now your system should restart automatically.

4. When everything booted up, you should accept terms and agreement in the popup window, and then you can check with GPU-Z, your memory clocks are really lowered now to the numbers you've entered with Afterburner earlier and will not raise to factory settings until you want it.

5. ATTENTION! After these manipulations you won't be able to do any over/downclocking with MSI Afterburner actually, if you want so, you'll need to disable Unofficial Overclocking Mode and restart your system, but in this case memory downclocking will be lost.

Worked on each of my rigs (have 12 of them), each of them have the same card models onboard (but different manufacturers), especially tried on 290x and 390x.

Gald if this will help somebody.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ingvarfervent on April 20, 2016, 08:06:22 AM
On My 7970 ( 1000\1500 ) - 20.5 Mh\s

Genoil 1.0.5\7 or Claymore D. v3 ( Ethereum-only mining ) can`t increase 20.5

What settings need change to improve Mh\s ?  :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v1.2
Post by: ShootNik on April 20, 2016, 08:06:42 AM
Hello Claymore.
Planned version for Linux?
Best Regards

Can you port it to linux, too.
If its not a big problem.

Hi, Claymore, thanks for great work. Same question... linux version planned? or no?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Marvell1 on April 20, 2016, 08:06:48 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

2. Set desired memory clock setting (for each card if they're different in your rig) and hit apply, save these settings at the first profile and check "apply overclocking at system startup" box. Now, if you run GPU-Z, you'll see lowered clocks at the "Graphics Card" tab, but if you check "Sensors" tab, you'll see that memory clocks remain the same, nothing has been lowered actually.

3. OK, go back to MSI Afterburner, go to Settings and ENABLE "Unofficial Overclocking Mode" without PowerPlay feature and hit OK. Now your system should restart automatically.

4. When everything booted up, you should accept terms and agreement in the popup window, and then you can check with GPU-Z, your memory clocks are really lowered now to the numbers you've entered with Afterburner earlier and will not raise to factory settings until you want it.

5. ATTENTION! After these manipulations you won't be able to do any over/downclocking with MSI Afterburner actually, if you want so, you'll need to disable Unofficial Overclocking Mode and restart your system, but in this case memory downclocking will be lost.

Worked on each of my rigs (have 12 of them), each of them have the same card models onboard (but different manufacturers), especially tried on 290x and 390x.

Gald if this will help somebody.

wow nice info, did you gain lowered temps and power usage by doing this ? what  mem clocks do you have now for your 290x and 390x cards ? and what is the new hash rate


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: palgin on April 20, 2016, 08:13:54 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

2. Set desired memory clock setting (for each card if they're different in your rig) and hit apply, save these settings at the first profile and check "apply overclocking at system startup" box. Now, if you run GPU-Z, you'll see lowered clocks at the "Graphics Card" tab, but if you check "Sensors" tab, you'll see that memory clocks remain the same, nothing has been lowered actually.

3. OK, go back to MSI Afterburner, go to Settings and ENABLE "Unofficial Overclocking Mode" without PowerPlay feature and hit OK. Now your system should restart automatically.

4. When everything booted up, you should accept terms and agreement in the popup window, and then you can check with GPU-Z, your memory clocks are really lowered now to the numbers you've entered with Afterburner earlier and will not raise to factory settings until you want it.

5. ATTENTION! After these manipulations you won't be able to do any over/downclocking with MSI Afterburner actually, if you want so, you'll need to disable Unofficial Overclocking Mode and restart your system, but in this case memory downclocking will be lost.

Worked on each of my rigs (have 12 of them), each of them have the same card models onboard (but different manufacturers), especially tried on 290x and 390x.

Gald if this will help somebody.

wow nice info, did you gain lowered temps and power usage by doing this ? what  mem clocks do you have now for your 290x and 390x cards ? and what is the new hash rate

Currently I'm running at 800 Mhz memory for 290x rigs and 650 Mhz for 390x rigs, I've chosen these settings based on memory controller load (lower the clocks - higher the load), temps lowered a bit (1-3 degrees Celsium for each card), haven't check the power usage yet, but hashraste increased up to +1,5 MH from each card, I think worth it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: restless on April 20, 2016, 08:25:20 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:
...................
Weird.
I usually enable Unofficial overclocking "without PowerPlay" and then I can change clocks up&down.
The problem is - if I stop the miner card clocks are stuck at those set in Afterburner (eg cards not downclocking to 2d clocks)

And if somethinmg goes wrong with saved settings - PC hangs.... one must go to safe mode and disable Afterburner


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Eliovp on April 20, 2016, 08:27:09 AM
If you check unofficial oc and disable ulps and without powerplay you can still oc or dc.. I gave this info over at ethereum forum with pictures..

However you cannot lower memory voltage, which will still be at stock.

It will consume less though and you will be able to hit better timings.

After you done these steps, hit apply with a new clock your screen will go black for a sec and you'll know it works :-)

So yes this is the best way to downclock.

You can aswell add flags to the afterburner shortcut.

F.e. /w24 .. Etc..

This will as well give you more options to go even deeper..

Anyhow. Best results are obtained with a hardmod :-)
Trust me i've spent countless hours trying to find my optimal settings :-)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Eliovp on April 20, 2016, 08:28:30 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:
...................
Weird.
I usually enable Unofficial overclocking "without PowerPlay" and then I can change clocks up&down.
The problem is - if I stop the miner card clocks are stuck at those set in Afterburner (eg cards not downclocking to 2d clocks)

And if somethinmg goes wrong with saved settings - PC hangs.... one must go to safe mode and disable Afterburner

True.. Theres a folder (profiles) in afterburner setup dir.. Delete that and you're set :-)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: palgin on April 20, 2016, 08:30:41 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:
...................
Weird.
I usually enable Unofficial overclocking "without PowerPlay" and then I can change clocks up&down.
The problem is - if I stop the miner card clocks are stuck at those set in Afterburner (eg cards not downclocking to 2d clocks)

And if somethinmg goes wrong with saved settings - PC hangs.... one must go to safe mode and disable Afterburner

Didn't work for me, so I wrote what helped in my case.

P.S: AMD Driver version 15.12


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: citronick on April 20, 2016, 08:36:38 AM
All my rigs now on v3
5 x MSI R9-390 (stock clock/1040/1500)
Celeron 1840/8Gb RAM/Win 8.1
Mining at ethermine.org (ETH) and zpool.ca (DCR)

ETH - Total Speed: 149.561 Mh/s, Total Shares: 687, Rejected: 0, Time: 05:18
ETH: GPU0 29.927 Mh/s, GPU1 29.914 Mh/s, GPU2 29.887 Mh/s, GPU3 29.910 Mh/s, GPU4 29.922 Mh/s

DCR - Total Speed: 2243.409 Mh/s, Total Shares: 953, Rejected: 78
DCR: GPU0 448.905 Mh/s, GPU1 448.716 Mh/s, GPU2 448.309 Mh/s, GPU3 448.652 Mh/s, GPU4 448.827 Mh/s

Notes:
1. no improvements on DCR rejects, from 8-9% to 7-8% -- could be a pool issue...
2. stock clock, no OC - delivers nearly 30mhs per card for ETH
3. GPU temps, low 70s from mid-70s

Cant wait for the solo mining version!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: cryptoc19 on April 20, 2016, 08:46:24 AM
I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

how does downclocking the memory actually help? and, to me, this value seems insane!  :) are you sure you meant 150 Mhz ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: bradli on April 20, 2016, 09:09:15 AM
I get too much reject on dcr
almost 50 %


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: o00o on April 20, 2016, 09:32:55 AM
I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

how does downclocking the memory actually help? and, to me, this value seems insane!  :) are you sure you meant 150 Mhz ?

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

Using 15.7.1 and Trixx? Are You sure it's underclocked? Checked in Trixx card info or GPU-Z?

I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: zorvalth on April 20, 2016, 09:34:36 AM
@Claymore, because of the new check of invalid shares which checks before submition, is there any way to check how many invalids i have? Isnt it better to be send to pool to check are they valid or not and not loosing computing power locally...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: merc84 on April 20, 2016, 09:35:03 AM
I found a way to lower memory clocks with MSI Afterburner, even when this feature is disabled in AMD driver, so, we need:

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

2. Set desired memory clock setting (for each card if they're different in your rig) and hit apply, save these settings at the first profile and check "apply overclocking at system startup" box. Now, if you run GPU-Z, you'll see lowered clocks at the "Graphics Card" tab, but if you check "Sensors" tab, you'll see that memory clocks remain the same, nothing has been lowered actually.

3. OK, go back to MSI Afterburner, go to Settings and ENABLE "Unofficial Overclocking Mode" without PowerPlay feature and hit OK. Now your system should restart automatically.

4. When everything booted up, you should accept terms and agreement in the popup window, and then you can check with GPU-Z, your memory clocks are really lowered now to the numbers you've entered with Afterburner earlier and will not raise to factory settings until you want it.

5. ATTENTION! After these manipulations you won't be able to do any over/downclocking with MSI Afterburner actually, if you want so, you'll need to disable Unofficial Overclocking Mode and restart your system, but in this case memory downclocking will be lost.

Worked on each of my rigs (have 12 of them), each of them have the same card models onboard (but different manufacturers), especially tried on 290x and 390x.

Gald if this will help somebody.

Seriously why so complicated, its simple... Install drivers that allow underclock (13.x) then put open cl dll's from the 15.12 drivers in the folder with the miner, the miner will use the 15.12 dll files for opencl and any over/underclocking will be controlled by the installed drivers. No restarting changing settings or generally screwing around, simple and clean.

Edit: dont understand what im talking about read this: http://cryptomining-blog.com/tag/amdocl/
Ps this wont work for newer cards that require newer drivers ie 370,380,380x etc


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ldw-com on April 20, 2016, 09:46:22 AM
I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

Try to go lower than -75mV on the core clock with Trixx..
 ;)

The only reason why i switched back to AB. :)

Seriously why so complicated, its simple... Install drivers that allow underclock (13.x) then put open cl dll's from the 15.12 drivers in the folder with the miner, the miner will use the 15.12 dll files for opencl and any over/underclocking will be controlled by the installed drivers. No restarting changing settings or generally screwing around, simple and clean.

Edit: dont understand what im talking about read this: http://cryptomining-blog.com/tag/amdocl/
Ps this wont work for newer cards that require newer drivers ie 370,380,380x etc

It works with every driver.

What you're telling here is even more complicated.
Copying dll's from another driver etc..

Just install any driver, check unofficial oc, disable ulps, without powerplay and you'll be able to do whatever you want.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 20, 2016, 09:52:26 AM
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1
What are your oppinion ?
Regards
Code:
almartins.PC-14
Are you sure this is the name of your worker?
Follow the instructions on the OP:
"-epsw    Password for Ethereum pool, use "x" as password."
Verifique o nome dos seus "workers" e a sua palavra passe. Tem a certeza que a palavra passe é "PC-14"?
Boa sorte!  ;)
Check the instructions on the OP more carefully. You will notice "-esm 2" option for coinotron.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 20, 2016, 09:55:41 AM
@Claymore, because of the new check of invalid shares which checks before submition, is there any way to check how many invalids i have? Isnt it better to be send to pool to check are they valid or not and not loosing computing power locally...

Checking share locally takes 25-50mcs only.
Pool can reject shares for several reasons, so checking share locally to detect tha GPU works incorrectly is a good idea. You can find "overclock" word in log file to find warning, perhaps I will also add a special text in miner stats about it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ldw-com on April 20, 2016, 09:58:19 AM
@Claymore <-- seems to get your attention  ;D

Any idea, v3 seems to crash after a while on 6x nano. v2 works perfectly (same settings, nothing changed)

Also, speed remains the same. No improvement, in some cases even less..

As i said before, all my other rigs with older cards are doing A LOT better. So kudos on that! :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 20, 2016, 10:04:50 AM
@Claymore <-- seems to get your attention  ;D
Any idea, v3 seems to crash after a while on 6x nano. v2 works perfectly (same settings, nothing changed)
Also, speed remains the same. No improvement, in some cases even less..
As i said before, all my other rigs with older cards are doing A LOT better. So kudos on that! :)

No ideas about crashes, for Fury there are not any improvements, though on my Nano I don't see any slowdown, same speed exactly.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: DaveyJones on April 20, 2016, 10:58:26 AM
I have the same problem as DaveyJones. v3.0 not working for me.
When i run it through CMD it prompts the parameters and does nothing at all. No errors, no works, nothing.
Win7 x64, R9 380x,  Crimson 15.12 (Crimson 16.1)

Bumping ... started with the 2.0 version


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 20, 2016, 11:03:21 AM
I have the same problem as DaveyJones. v3.0 not working for me.
When i run it through CMD it prompts the parameters and does nothing at all. No errors, no works, nothing.
Win7 x64, R9 380x,  Crimson 15.12 (Crimson 16.1)

Bumping ... started with the 2.0 version

Sorry, I have no idea why you see it. I think it must be something related to some software on your system. You can try it on clean Windows to check if it is true.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: DaveyJones on April 20, 2016, 11:05:11 AM
I have the same problem as DaveyJones. v3.0 not working for me.
When i run it through CMD it prompts the parameters and does nothing at all. No errors, no works, nothing.
Win7 x64, R9 380x,  Crimson 15.12 (Crimson 16.1)

Bumping ... started with the 2.0 version

Sorry, I have no idea why you see it. I think it must be something related to some software on your system. You can try it on clean Windows to check if it is true.

Why should it be a software issue when everything till 1.2 ran fine? Must be a change that came into your miner between 1.2 and 2.0


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 20, 2016, 11:10:16 AM
I have the same problem as DaveyJones. v3.0 not working for me.
When i run it through CMD it prompts the parameters and does nothing at all. No errors, no works, nothing.
Win7 x64, R9 380x,  Crimson 15.12 (Crimson 16.1)

Bumping ... started with the 2.0 version

Sorry, I have no idea why you see it. I think it must be something related to some software on your system. You can try it on clean Windows to check if it is true.

Why should it be a software issue when everything till 1.2 ran fine? Must be a change that came into your miner between 1.2 and 2.0

I use third-party EXE packer to protect miner from disassembling and changes, perhaps it can cause such thing but I cannot remove it because I have some experience about how my miners can be used if they don't have this protection. Anyway, it works for >99% systems. So your system must have something special.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: thesaltonsea on April 20, 2016, 11:24:53 AM
When i downclock the memory of 7950 to 800mhz, is slower by 6mh ... ? What am i missing ? :) (Its with Elpida ram chips)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ldw-com on April 20, 2016, 11:29:08 AM
@Claymore <-- seems to get your attention  ;D
Any idea, v3 seems to crash after a while on 6x nano. v2 works perfectly (same settings, nothing changed)
Also, speed remains the same. No improvement, in some cases even less..
As i said before, all my other rigs with older cards are doing A LOT better. So kudos on that! :)

No ideas about crashes, for Fury there are not any improvements, though on my Nano I don't see any slowdown, same speed exactly.

Been having the issue with the miner that crashes on a few rigs of mine now.

Different drivers so that's not the issue. v2 runs perfectly fine.

I'm reverting back.

Edit: This sounds a bit harsh but i'm happy though, no worries :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: barthe on April 20, 2016, 12:01:29 PM
Hi,

I have 2 280x and 2 270x

With the Claymore miner I have only

.1minR280x           286,331
.2minR280X   257,698
.3min270X         400,863
.4min270X           214,748

In hasrate.

You have an idea for a good configuration ?

Thx


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: merc84 on April 20, 2016, 12:16:56 PM
I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

Try to go lower than -75mV on the core clock with Trixx..
 ;)

The only reason why i switched back to AB. :)

Seriously why so complicated, its simple... Install drivers that allow underclock (13.x) then put open cl dll's from the 15.12 drivers in the folder with the miner, the miner will use the 15.12 dll files for opencl and any over/underclocking will be controlled by the installed drivers. No restarting changing settings or generally screwing around, simple and clean.

Edit: dont understand what im talking about read this: http://cryptomining-blog.com/tag/amdocl/
Ps this wont work for newer cards that require newer drivers ie 370,380,380x etc

It works with every driver.

What you're telling here is even more complicated.
Copying dll's from another driver etc..

Just install any driver, check unofficial oc, disable ulps, without powerplay and you'll be able to do whatever you want.

Copy pasting 4 files is complicated? I think you better quit the mining game if u feel this way....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ldw-com on April 20, 2016, 12:19:03 PM
I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

Try to go lower than -75mV on the core clock with Trixx..
 ;)

The only reason why i switched back to AB. :)

Seriously why so complicated, its simple... Install drivers that allow underclock (13.x) then put open cl dll's from the 15.12 drivers in the folder with the miner, the miner will use the 15.12 dll files for opencl and any over/underclocking will be controlled by the installed drivers. No restarting changing settings or generally screwing around, simple and clean.

Edit: dont understand what im talking about read this: http://cryptomining-blog.com/tag/amdocl/
Ps this wont work for newer cards that require newer drivers ie 370,380,380x etc

It works with every driver.

What you're telling here is even more complicated.
Copying dll's from another driver etc..

Just install any driver, check unofficial oc, disable ulps, without powerplay and you'll be able to do whatever you want.

Copy pasting 4 files is complicated? I think you better quit the mining game if u feel this way....

Haha, cmon, let us all be a bit friendly.

This is the account i use when i'm at work.

I'm Eliovp ---> https://bitcointalk.org/index.php?topic=1424132.0

I know what i'm doing, don't worry ;-)

My point is. It works with every driver, no need to copy files. It all works out of the box. (tested on 6 different kind of cards and 4 different chips) ;-)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: chup on April 20, 2016, 12:50:28 PM
I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

how does downclocking the memory actually help? and, to me, this value seems insane!  :) are you sure you meant 150 Mhz ?

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

Using 15.7.1 and Trixx? Are You sure it's underclocked? Checked in Trixx card info or GPU-Z?

I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

15.12 Trixx and Win7 x64 I can only overclock, but not downclock. Trixx accepts downclock, pretends that it's done, but if I check in card info or GPU-Z clocks are default values.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Gagana on April 20, 2016, 12:56:55 PM

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

Where is this option? I can't find. Settings? First tab? There is no such an option. Latest Afterburner. 15.12 crimeson


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: ldw-com on April 20, 2016, 01:11:08 PM

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

Where is this option? I can't find. Settings? First tab? There is no such an option. Latest Afterburner. 15.12 crimeson

Settings -> AMD Compatibility Options :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Gagana on April 20, 2016, 01:32:55 PM

1. Run MSI Afterburner and check that "Unofficial Overclocking Mode" is currently DISABLED

Where is this option? I can't find. Settings? First tab? There is no such an option. Latest Afterburner. 15.12 crimeson

Settings -> AMD Compatibility Options :)

There was no such a section at all ) Until I return "Enable low-level..." from "core" to "user" value. But...

If I set memory clock to 650 on my MSI R9 390 *3 then the hashrate drops to 21Mh from 31.3 ) So, I've switched back to 1100/1500


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: spiete on April 20, 2016, 01:44:51 PM
Hi!

Help me please with settings for x1 r9 380x and x2 r7 370.

What claymore config for mining do i need?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: merc84 on April 20, 2016, 02:21:32 PM

Haha, cmon, let us all be a bit friendly.

This is the account i use when i'm at work.

I'm Eliovp ---> https://bitcointalk.org/index.php?topic=1424132.0

I know what i'm doing, don't worry ;-)

My point is. It works with every driver, no need to copy files. It all works out of the box. (tested on 6 different kind of cards and 4 different chips) ;-)

In my experience AB does not work well with rigs using different cards ie 7950, 7870 etc. Also using dlls is a handy way to get past certain issue with drivers and more than 4 gpu in windows, ie when using 6 gpu driver mod not all drivers are supported. At any rate it is good for community to know there are a few different options.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: zorvalth on April 20, 2016, 02:33:49 PM
@Claymore, since the v3.0 I got 3 hangs on my rigs. Some of the gpu crashes, then the miner is trying to restart itself but it stops on the text logo where it says"Claymore dual.... v3.0" Can you make an option if gpu crashes to reboot the whole windows? That way It wont take an hour for the pool to notifies me. Right now i got a better hashrate with your miner but its pointless because i lost 3-4 working hours on some rigs. Got lucky it didnt happen at night...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Mrga666 on April 20, 2016, 03:09:42 PM
Claymore i need help,
I got 390x2 and i at first got 54MHs on default start.bat but then I restarted it and it stays at 0MHs...
Please help

Got Win7/64bit but I got 16.4 drivers because 15.12 didnt work for me


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 03:15:33 PM
v3.1:

- reduced delays at shares sending, it must improve speed on pools a bit.

It is not a major update, just found some additional delays in v3.0 so I uplodaded an update. No other changes.

PS. I see dwarfpool has "Sent hashrate" column. How to make it work? I tried eth-proxy + ethminer but it is still empty. If someone can point me how to make it work for Stratum I will add it to my miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: flysats on April 20, 2016, 03:23:08 PM
v3.1:
 I see dwarfpool has "Sent hashrate" column. How to make it work? I tried eth-proxy + ethminer but it is still empty. If someone can point me how to make it work for Stratum I will add it to my miner.

simple
"Sent hashrate"=shares/time interval
use only direct http mining


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: qqqq on April 20, 2016, 03:23:34 PM
Is Json Api for remote monitoring planned ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: flysats on April 20, 2016, 03:29:12 PM
v3.1:

you can add vrm temp monitoring?
my card critical point vrm not gpu

7990 not correct -tt monitoring and freq management - only 1 gpu see


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 03:29:44 PM
Is Json Api for remote monitoring planned ?

Yes, looking for existing solutions for that.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 03:30:48 PM
v3.1:

you can add vrm temp monitoring?
my card critical point vrm not gpu

7990 not correct -tt monitoring and freq management - only 1 gpu see

Try to disable CrossFire if you see only one card.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: phzi on April 20, 2016, 03:31:41 PM
v3.1:

- reduced delays at shares sending, it must improve speed on pools a bit.

It is not a major update, just found some additional delays in v3.0 so I uplodaded an update. No other changes.

PS. I see dwarfpool has "Sent hashrate" column. How to make it work? I tried eth-proxy + ethminer but it is still empty. If someone can point me how to make it work for Stratum I will add it to my miner.

Stratum method is called, "eth_submitHashrate."  I posted about this earlier in this thread as well (post #569).

See here (eth-proxy relaying method):
https://github.com/Atrides/eth-proxy/blob/d993fc8db84dc09f25b72a34ce69b6977c88ac64/mining_libs/getwork_listener.py#L58-L62

Edit:
Also see (ethminer creating eth_submitHashrate commands):
https://github.com/ethereum/libethereum/blob/8b389757cfc2757965671fa8e080b32aaf65771b/ethminer/MinerAux.h#L536
https://github.com/ethereum/libethereum/blob/6d65d5d1412013381324826ea583e8b3fa9f5f3c/ethminer/FarmClient.h#L37-L47


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: markoz on April 20, 2016, 03:35:47 PM
this is what i get from suprnova when changing all rigs to v3

 !!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

 invalid shares are about 40-50%

will try v3.1


Title: ???
Post by: maxfunky on April 20, 2016, 03:37:47 PM
What do you guys think is the best GPU I should build my rig with for dual ETH/DCR ?  ???
Tanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 03:50:19 PM
v3.1:

- reduced delays at shares sending, it must improve speed on pools a bit.

It is not a major update, just found some additional delays in v3.0 so I uplodaded an update. No other changes.

PS. I see dwarfpool has "Sent hashrate" column. How to make it work? I tried eth-proxy + ethminer but it is still empty. If someone can point me how to make it work for Stratum I will add it to my miner.

Stratum method is called, "eth_submitHashrate."  I posted about this earlier in this thread as well (post #569).

See here (eth-proxy relaying method):
https://github.com/Atrides/eth-proxy/blob/d993fc8db84dc09f25b72a34ce69b6977c88ac64/mining_libs/getwork_listener.py#L58-L62

Edit:
Also see (ethminer creating eth_submitHashrate commands):
https://github.com/ethereum/libethereum/blob/8b389757cfc2757965671fa8e080b32aaf65771b/ethminer/MinerAux.h#L536
https://github.com/ethereum/libethereum/blob/6d65d5d1412013381324826ea583e8b3fa9f5f3c/ethminer/FarmClient.h#L37-L47

Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.


Title: Re: ???
Post by: Q_R_V on April 20, 2016, 04:06:37 PM
What do you guys think is the best GPU I should build my rig with for dual ETH/DCR ?  ???
Tanks!

I would say 280x or 380x


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: th00ber on April 20, 2016, 04:27:20 PM
Hello guys,

I just write some monitoring script to dispaly a status page of my rigs running on windows.
I use to mine on Linux back in 2013/2014. But from 2015 I mine on windows some Ethereum with my crossfire on desktop ... and I just bought mores cards to use a second rigs 4 months ago.
And I wanted to still have the monitoring page I had in Pimp, SMOS or Kopiemtu :)
So I write it myself.
(For your informations : https://forum.ethereum.org/discussion/6058/windows-monitoring/p1)

First version of my windows ethereum monitoring tool
My rig status page : http://vps261600.ovh.net
Download : http://vps261600.ovh.net/download/monitorig.7z

HOW TO :
- Download and extract
- Edit the current rig config to give the miner folder and the bat file that launch it in this folder (use the edit_current_rig_config.bat and follow the exemple)
- Run the start-monitoring.bat
This will launch the bat file you specified for the miner in background and log the output, then start HTTP server on localhost and OpenHardwareMonitor (don't stop it or you will not be able to get the sensor informations, let it displayed or minimize it, it will become a tray icon) and then start to monitor the rig and refresh the informations (every 60sec)
- You can acces HTTP server in your lan (checking everything is ok with the smartphone while on TV) or you can open a port of your router with a NAT rule to allow accessing the HTTP server from everywhere in the internet
If you have multiple rigs, just run the tool on each, and don't forget to add the URL of the rigs with edit_http_rigs_list.bat.

In case of dual mining, it will display ETH and DCR hashrate.
This tool is compatible with ethminer, geniol-ethminer, qtminer and claymore miner but in the config file be sure you are using MINER_TYPE="claymore" or MINER_TYPE="default"

Exemple of rigs list
{
  "rigs":[
    "http://192.168.1.20:9510/mining-infos.json",
    "http://192.168.1.21:9510/mining-infos.json"
  ]
}

Feel free to test it and let me know if you found this cool :)

https://15254b2dcaab7f5478ab-24461f391e20b7336331d5789078af53.ssl.cf1.rackcdn.com/ethereum.vanillaforums.com/editor/p5/1kkl1rhmt66f.jpg


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: citronick on April 20, 2016, 04:41:15 PM
Hello guys,

I just write some monitoring script to dispaly a status page of my rigs running on windows.
I use to mine on Linux back in 2013/2014. But from 2015 I mine on windows some Ethereum with my crossfire on desktop ... and I just bought mores cards to use a second rigs 4 months ago.
And I wanted to still have the monitoring page I had in Pimp, SMOS or Kopiemtu :)
So I write it myself.
(For your informations : https://forum.ethereum.org/discussion/6058/windows-monitoring/p1)

First version of my windows ethereum monitoring tool
My rig status page : http://vps261600.ovh.net
Download : http://vps261600.ovh.net/download/monitorig.7z

HOW TO :
- Download and extract
- Edit the current rig config to give the miner folder and the bat file that launch it in this folder (use the edit_current_rig_config.bat and follow the exemple)
- Run the start-monitoring.bat
This will launch the bat file you specified for the miner in background and log the output, then start HTTP server on localhost and OpenHardwareMonitor (don't stop it or you will not be able to get the sensor informations, let it displayed or minimize it, it will become a tray icon) and then start to monitor the rig and refresh the informations (every 60sec)
- You can acces HTTP server in your lan (checking everything is ok with the smartphone while on TV) or you can open a port of your router with a NAT rule to allow accessing the HTTP server from everywhere in the internet
If you have multiple rigs, just run the tool on each, and don't forget to add the URL of the rigs with edit_http_rigs_list.bat.

In case of dual mining, it will display ETH and DCR hashrate.
This tool is compatible with ethminer, geniol-ethminer, qtminer and claymore miner but in the config file be sure you are using MINER_TYPE="claymore" or MINER_TYPE="default"

Exemple of rigs list
{
  "rigs":[
    "http://192.168.1.20:9510/mining-infos.json",
    "http://192.168.1.21:9510/mining-infos.json"
  ]
}

Feel free to test it and let me know if you found this cool :)

https://15254b2dcaab7f5478ab-24461f391e20b7336331d5789078af53.ssl.cf1.rackcdn.com/ethereum.vanillaforums.com/editor/p5/1kkl1rhmt66f.jpg

this looks good - will test it out and feedback


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: bradli on April 20, 2016, 05:03:58 PM
this is what i get from suprnova when changing all rigs to v3

 !!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

 invalid shares are about 40-50%

will try v3.1
same to me
and i change the port
put cuda stratum and looks ok
much less invalid


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Walrusbonzo on April 20, 2016, 05:32:42 PM
Awesome work!

Up from 66.5 mh/s to 70mh/s with 1 x 7970 and 2 x 7950 single mining Eth.

Hi, im using the same cards , 2x 7950 and 1x7970 , but i get only 62mh ... Can you tell us your configs and card cloks please ?

The 7970 is running at 1140/1700, one 7950 runs at 1140/1700, the other at 1190/1700.

I'm finding that the "fast" algorithm is best for the 7970, but the "slow" algo is better for the two 7950.

Intensity is set to 4 for the 7970 as that is a display card, this allows for little lag in using the computer, but when not being used hash rate goes up to max. The 7950s are both set to 10.

Good luck

EDIT: Bear in mind I'm using 1.65v on all three graphics cards to get 1700MHz on the memory clocks. I've also used a hex editor to manually change the memory timings of the three GFX card BIOS. Some of you may remember Stilt from the Litecoin mining days and the BIOS changes he could make to get more Scrypt performance, I've basically done the same thing. This really helped the 7970 as its timings were shafted, originally it was slower than the two 7950s.

EDIT2: These clocks are NOT 100% stable yet, they were for Ethminer. But the PC stopped mining today, so I'm going to need to reduce clocks to regain stability. I must be close though, it survived 12 hours.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Termie on April 20, 2016, 05:51:48 PM
Is there meanwhile a working way to use this miner with Coinotron? (myAccount.myWorker:Password)?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: bradli on April 20, 2016, 05:57:12 PM
Is there meanwhile a working way to use this miner with Coinotron? (myAccount.myWorker:Password)?
coinotron, coinmine:
   EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x -allpools 1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Termie on April 20, 2016, 06:32:08 PM
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.

Authorization failed
:{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: phzi on April 20, 2016, 07:19:06 PM
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_submithashrate

Params:
1. Hashrate, a hexadecimal string representation (32 bytes) of the hash rate
2. ID, String - A random hexadecimal(32 bytes) ID identifying the client

I am fairly sure most of the pools just ignore the ID string.  Could ask dr_pra or miningpoolhub to confirm how they how they handle it.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: lrdo_rvaen on April 20, 2016, 07:28:54 PM
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.

I saw hashrate in that column than i was usein eth itself to mine. E.g. eth -G And it definitly don't work with ethminer.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 08:04:47 PM
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.

Authorization failed
:{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}


For password there is "-epsw" option. Don't try to put password to "-eworker", sample demonstrates it clearly.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Republic of Coin on April 20, 2016, 08:06:12 PM
For the -wd watch dog function, the default is -wd 1. If I do not want the watch dog, what do I put, should that be -wd 0?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 08:06:51 PM
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_submithashrate

Params:
1. Hashrate, a hexadecimal string representation (32 bytes) of the hash rate
2. ID, String - A random hexadecimal(32 bytes) ID identifying the client

I am fairly sure most of the pools just ignore the ID string.  Could ask dr_pra or miningpoolhub to confirm how they how they handle it.

Ok, but if there are many workers and they send their hashrate - how pool will detect what hashrate from what worker? Seems strange for me, that's why I'd like to see working miner with Stratum to see how it works.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 08:07:27 PM
For the -wd watch dog function, the default is -wd 1. If I do not want the watch dog, what do I put, should that be -wd 0?

Yes.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Termie on April 20, 2016, 08:36:53 PM
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.

Authorization failed
:{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}


For password there is "-epsw" option. Don't try to put password to "-eworker", sample demonstrates it clearly.

Tried several variations, error above comes with -eworker myAccount.myWorker -epswd Password


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Marvell1 on April 20, 2016, 08:39:58 PM
so after close to  24 hours i dont see an improvment on hashrate at the pool, i like the better stablity on some of my miners though but when i solo mine i dont have stability issues so I wil probbaly go
back to solo mining after i get a beefier stratum host box up. 

Good effort though but it seems to submit shares slower than ethminer which could be the reason for the equal hash rate ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: almartins on April 20, 2016, 08:41:16 PM
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 0 -epsw PC-14 -allpools 1
What are your oppinion ?
Regards
Code:
almartins.PC-14
Are you sure this is the name of your worker?
Follow the instructions on the OP:
"-epsw    Password for Ethereum pool, use "x" as password."
Verifique o nome dos seus "workers" e a sua palavra passe. Tem a certeza que a palavra passe é "PC-14"?
Boa sorte!  ;)
Check the instructions on the OP more carefully. You will notice "-esm 2" option for coinotron.

Hi Claymore,
Have tried:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal almartins.PC-14 -esm 2 -epsw PC-14 -allpools 1

but same result; can't connect to coinotron pool :( with error:
"
╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v1.2 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 4
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
Total cards: 4

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
"
maybe you have another solution ...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 08:43:46 PM
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.

Authorization failed
:{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}


For password there is "-epsw" option. Don't try to put password to "-eworker", sample demonstrates it clearly.

Tried several variations, error above comes with -eworker myAccount.myWorker -epswd Password

Full command line please.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 08:50:19 PM
I really have no idea why you cannot make it work with coinotron. Here is my command line and it works, you can check it:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

"Redhex" is my login, "rig1" is my worker name, "x" is worker's password. If you use your login, worker and password and it does not work it means that you are doing something wrong, check everything again and again until you find the mistake.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Beachguy on April 20, 2016, 09:09:47 PM
24 hour update on

2 MSI R9 270X 4 GB
1 MSI HD 7850 2 GB
Mining at ethermine. everything box stock no tweaks or mods.

Steady as she goes... 865 shares and 0 rejects
14.5xx , 14.5xx and 12.7xx Total 41.7

No degradation in hash speed, temps on cards good.

Thanks for this miner Claymore, started GPU mining back in 2013 and this brought me back from the land of asics and cloud.

adding the ASUS R9 270X 2 GB back in the mix tomorrow. Aleady had it clocking just over 13 MH.




Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: almartins on April 20, 2016, 09:20:19 PM
I really have no idea why you cannot make it work with coinotron. Here is my command line and it works, you can check it:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

"Redhex" is my login, "rig1" is my worker name, "x" is worker's password. If you use your login, worker and password and it does not work it means that you are doing something wrong, check everything again and again until you find the mistake.

Hi again,

Still same error:
...
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}

I have inclusive change my worker and password name to "PC14" and restart my machine but same problem ! My computer is running windows 7 ...



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 09:22:27 PM
I really have no idea why you cannot make it work with coinotron. Here is my command line and it works, you can check it:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

"Redhex" is my login, "rig1" is my worker name, "x" is worker's password. If you use your login, worker and password and it does not work it means that you are doing something wrong, check everything again and again until you find the mistake.

Hi again,

Still same error:
...
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}

I have inclusive change my worker and password name to "PC14" and restart my machine but same problem ! My computer is running windows 7 ...

"-esm 2" is the key. Miner shows it: "qtminer stratum mode". coinotron does not work with qtminer, it works with "miner-proxy" which is enabled with "-esm 2", not with "-esm 1".


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Tacalt on April 20, 2016, 09:35:48 PM
so after close to  24 hours i dont see an improvment on hashrate at the pool, i like the better stablity on some of my miners though but when i solo mine i dont have stability issues so I wil probbaly go
back to solo mining after i get a beefier stratum host box up. 

Good effort though but it seems to submit shares slower than ethminer which could be the reason for the equal hash rate ?

How do you know the Claymore miner is submitting shares slower than the ethminer? Will this be solved by 3.1?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: almartins on April 20, 2016, 09:53:19 PM
I really have no idea why you cannot make it work with coinotron. Here is my command line and it works, you can check it:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

"Redhex" is my login, "rig1" is my worker name, "x" is worker's password. If you use your login, worker and password and it does not work it means that you are doing something wrong, check everything again and again until you find the mistake.

Hi again,

Still same error:
...
POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}

I have inclusive change my worker and password name to "PC14" and restart my machine but same problem ! My computer is running windows 7 ...

"-esm 2" is the key. Miner shows it: "qtminer stratum mode". coinotron does not work with qtminer, it works with "miner-proxy" which is enabled with "-esm 2", not with "-esm 1".

Hi Claymore,

I'm already using "-esm 2" but "qtminer stratum mode" is activate any way. Maybe you have a problem with this stratum type implementation ? ... Please check


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 10:00:17 PM
Hi Claymore,
I'm already using "-esm 2" but "qtminer stratum mode" is activate any way. Maybe you have a problem with this stratum type implementation ? ... Please check

So if you take my command line (I posted it above) with no changes you see "qtminer mode"? If so, we need someone to confirm it because I cannot reproduce it, for me it shows "miner-proxy stratum mode".
Here is my command line again:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: almartins on April 20, 2016, 10:09:29 PM
Hi Claymore,
I'm already using "-esm 2" but "qtminer stratum mode" is activate any way. Maybe you have a problem with this stratum type implementation ? ... Please check

So if you take my command line (I posted it above) with no changes you see "qtminer mode"? If so, we need someone to confirm it because I cannot reproduce it, for me it shows "miner-proxy stratum mode".
Here is my command line again:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

Even with your command line the result is:

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>EthDcrMiner64.ex
e -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v1.2 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 4
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
Total cards: 4

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}

My complete bat file is:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1


The problem occurs ... maybe someone at coinotron can confirm ... or not ????


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Trimegistus on April 20, 2016, 10:32:34 PM
Guys, how are you doing with v3.1? Any speed improvement?

Can anyone share some optimized settings for the HD 7950? Mine are now at ~18 MHs on stock settings.

Someone mentioned reducing memory clock speed to get better timings, right? I did it but the only result was loosing a few MHs  ???

Currently I have a two HIS 7950 IceQ 3GB GDDR5 but I have several other 7950s on their way.

Any ideas?

Thx!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: madmartyk on April 20, 2016, 10:36:31 PM
On my 290x I'm getting 29.5 and on my 280x's I'm getting 21.1 and 20.5

Poolside I'm getting a Effective Average Hashrate (last 24h): 67.0 MH/s (I shut down the miners to install 3.1)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: supersonic on April 20, 2016, 10:40:01 PM
Hi Claymore,
I'm already using "-esm 2" but "qtminer stratum mode" is activate any way. Maybe you have a problem with this stratum type implementation ? ... Please check

So if you take my command line (I posted it above) with no changes you see "qtminer mode"? If so, we need someone to confirm it because I cannot reproduce it, for me it shows "miner-proxy stratum mode".
Here is my command line again:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

Even with your command line the result is:

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>EthDcrMiner64.ex
e -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v1.2 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 4
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
Total cards: 4

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}

My complete bat file is:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1


The problem occurs ... maybe someone at coinotron can confirm ... or not ????

╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v3.0 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 2
GPU #0: name: Tahiti, 3072 MB available, 32 units
GPU #1: name: Tahiti, 3072 MB available, 32 units
Total cards: 2

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

GPU #0 recognized as Radeon 280X/380X
GPU #1 recognized as Radeon 280X/380X
POOL version
GPU #0: set -etha as 0 (ETH algo for fast cards)
GPU #1: set -etha as 0 (ETH algo for fast cards)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Authorized

my bat is:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
SET GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -tt 80 -esm 2 -mode 1 -epool coinotron.com:3344 -allpools 1 -ewal supersonic.1 -epsw x


working as intended


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Vegetablepin on April 20, 2016, 10:44:53 PM
this is what i get from suprnova when changing all rigs to v3

 !!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

 invalid shares are about 40-50%

will try v3.1

make a new worker

edit: eth hash went up for 270x/80x had to reload dag


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 10:50:19 PM

The problem occurs ... maybe someone at coinotron can confirm ... or not ????


History.txt:

v2.0
...
- Added "-esm 2" option for "miner-proxy" Stratum version - for such pools like coinotron, coinmine, etc.
...

So you need at least v2.0, not v1.2


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 20, 2016, 10:52:55 PM
this is what i get from suprnova when changing all rigs to v3

 !!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

 invalid shares are about 40-50%

will try v3.1

make a new worker

eth hash went down mining on dwarfpool from 3.0 to 3.1 for tahiti cards

If you get invalid shares - remove DAG files. To test exact hashrate you need at least 24 hours for fast rig and 48 hours for slow rig. My test rigs don't show any slowdown for both v3.0 and v3.1 for now.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: almartins on April 20, 2016, 11:38:05 PM

The problem occurs ... maybe someone at coinotron can confirm ... or not ????


History.txt:

v2.0
...
- Added "-esm 2" option for "miner-proxy" Stratum version - for such pools like coinotron, coinmine, etc.
...

So you need at least v2.0, not v1.2

Problem solved

I was using a old version !! I don't understand why because I made a recente download !

Will check hashrate and give some feedback. Thanks all.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: icelove on April 21, 2016, 01:48:31 AM
can this miner only miner Decred ? i have some 1G card can't miner the EHT. thanks.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: DMaster2008 on April 21, 2016, 01:55:44 AM
can this miner only miner Decred ?
Devfee can be mined only at Ethereum pools, so no.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: sakuleo on April 21, 2016, 02:12:10 AM
Catalyst v15.12?
or CRYMSOM Catalyst v15.12?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: DMaster2008 on April 21, 2016, 02:15:31 AM
Catalyst v15.12?
or CRYMSOM Catalyst v15.12?
AFAIK the driver edition within the same version doesn't matter.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: gaalx on April 21, 2016, 04:37:51 AM
Nvidia - no.
Why? Make a second direction, thank you!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Washika on April 21, 2016, 06:00:07 AM
this is what i get from suprnova when changing all rigs to v3

 !!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

 invalid shares are about 40-50%

will try v3.1

make a new worker

eth hash went down mining on dwarfpool from 3.0 to 3.1 for tahiti cards

If you get invalid shares - remove DAG files. To test exact hashrate you need at least 24 hours for fast rig and 48 hours for slow rig. My test rigs don't show any slowdown for both v3.0 and v3.1 for now.

For the 7970 or 280x, you need to use -etha 1, that is for the slow cards. If you use 0, it will reduce speed a bit.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: o00o on April 21, 2016, 06:10:05 AM
I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

how does downclocking the memory actually help? and, to me, this value seems insane!  :) are you sure you meant 150 Mhz ?

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

Using 15.7.1 and Trixx? Are You sure it's underclocked? Checked in Trixx card info or GPU-Z?

I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

15.12 Trixx and Win7 x64 I can only overclock, but not downclock. Trixx accepts downclock, pretends that it's done, but if I check in card info or GPU-Z clocks are default values.

MSI Afterburner reports that my memory is indeed running at 150 Mhz once set via Trixx.  I have no other utilities present in this system which is why I cannot provide any other kind of confirmation.  Try launching a game or anything else which can put a substantial load on your memory bus for that matter, such as Scrypt and you'll immediately notice a drastic decrease in performance.  Out of curiosity, I "tried" to play a variety of games including Fallout 4, BF4 and GTA5 and let me say that what was once smooth sailing at 60 FPS is now a slideshow, which eliminated the last shred of doubt.  150 Mhz has proved to be optimal on my 290s, 290xs and 390xs as anything lower or higher seems to offset timings.  






Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Marvell1 on April 21, 2016, 06:26:31 AM
so after close to  24 hours i dont see an improvment on hashrate at the pool, i like the better stablity on some of my miners though but when i solo mine i dont have stability issues so I wil probbaly go
back to solo mining after i get a beefier stratum host box up. 

Good effort though but it seems to submit shares slower than ethminer which could be the reason for the equal hash rate ?

How do you know the Claymore miner is submitting shares slower than the ethminer? Will this be solved by 3.1?

Just visually looking at how many times i see subbmited and accepted on ethminer vs the genoli version of claymore.  Plus i was not seeing hash rate increases even for my slower cards

I'm testing the 3.1 version right now.  For now though i only run claymore's version on my boxes that had issues with ethminer.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: devlin on April 21, 2016, 07:11:13 AM
I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

how does downclocking the memory actually help? and, to me, this value seems insane!  :) are you sure you meant 150 Mhz ?

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

Using 15.7.1 and Trixx? Are You sure it's underclocked? Checked in Trixx card info or GPU-Z?

I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

15.12 Trixx and Win7 x64 I can only overclock, but not downclock. Trixx accepts downclock, pretends that it's done, but if I check in card info or GPU-Z clocks are default values.

MSI Afterburner reports that my memory is indeed running at 150 Mhz once set via Trixx.  I have no other utilities present in this system which is why I cannot provide any other kind of confirmation.  Try launching a game or anything else which can put a substantial load on your memory bus for that matter, such as Scrypt and you'll immediately notice a drastic decrease in performance.  Out of curiosity, I "tried" to play a variety of games including Fallout 4, BF4 and GTA5 and let me say that what was once smooth sailing at 60 FPS is now a slideshow, which eliminated the last shred of doubt.  150 Mhz has proved to be optimal on my 290s, 290xs and 390xs as anything lower or higher seems to offset timings. 






By curiosity I set memory for R9 290 to run at 150Mh, speed for ETH is aprox. 3Mh .... You are sure memory is indeed run at 150Mh, look at MSI Afterburner Hardware Monitor graph not in main window.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Walrusbonzo on April 21, 2016, 07:13:38 AM
Guys, how are you doing with v3.1? Any speed improvement?

Can anyone share some optimized settings for the HD 7950? Mine are now at ~18 MHs on stock settings.

Someone mentioned reducing memory clock speed to get better timings, right? I did it but the only result was loosing a few MHs  ???

Currently I have a two HIS 7950 IceQ 3GB GDDR5 but I have several other 7950s on their way.

Any ideas?

Thx!

I'm running my 2x7950s at 1130/1700(1.2v/1.65v) and 1190/1700(1.23v/1.65v). They get me 23mh/s and 23.5mh/s respectively.

Usually with a standard 7950 the ROM has different memory timings for different ranges of memory clockspeed. I custom tuned the ROM files for my 7950s with a hex editor and set the same tight timings from 1376MHz to 1750MHz+. That way I know the memory timings are not changing between any clock speed I wish to try.

I could edit your ROMs too if you are comfortable with flashing them. But I would only recommend you do it if your GFX cards have a backup ROM switch in case something goes wrong. You should then find you'll get great performance at 1500MHz and beyond.

You need good cooling to maintain stability with the kind of overclocks I'm doing.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Gataway on April 21, 2016, 08:22:34 AM
I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

how does downclocking the memory actually help? and, to me, this value seems insane!  :) are you sure you meant 150 Mhz ?

I use Sapphire Trixx to downclock my memory to 150 Mhz which also increases hashrate due to tighter timings. ;)

Using 15.7.1 and Trixx? Are You sure it's underclocked? Checked in Trixx card info or GPU-Z?

I'm absolutely certain, Trixx seems to be the only utility which allows you to do so without any hassle anyway.  A wide variety of algorithms benefit from setting the memory to 150 Mhz [600 Mhz effective] such as Quark & Qubit which rely on latency rather than throughput.  This  sets your memory bus to a strap with tighter timings which will ultimately lower power consumption and heat and also allows for more overclocking headroom.  To prove my point, I managed to yield 23 MH/s for Quark, a similar figure for Qubit and 37 MH/s Ethereum & 620 MH/s for Decred in dual mining mode on a 390x without rejected shares.

Has anyone tried Stilit's bios or any other modded bios for that matter on Ethereum?

15.12 Trixx and Win7 x64 I can only overclock, but not downclock. Trixx accepts downclock, pretends that it's done, but if I check in card info or GPU-Z clocks are default values.

MSI Afterburner reports that my memory is indeed running at 150 Mhz once set via Trixx.  I have no other utilities present in this system which is why I cannot provide any other kind of confirmation.  Try launching a game or anything else which can put a substantial load on your memory bus for that matter, such as Scrypt and you'll immediately notice a drastic decrease in performance.  Out of curiosity, I "tried" to play a variety of games including Fallout 4, BF4 and GTA5 and let me say that what was once smooth sailing at 60 FPS is now a slideshow, which eliminated the last shred of doubt.  150 Mhz has proved to be optimal on my 290s, 290xs and 390xs as anything lower or higher seems to offset timings. 






By curiosity I set memory for R9 290 to run at 150Mh, speed for ETH is aprox. 3Mh .... You are sure memory is indeed run at 150Mh, look at MSI Afterburner Hardware Monitor graph not in main window.



I do not think the memory shall run 150 MHz to mine the Ethereum. It is OK just for Decred mining.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: cryptominer_fuad88 on April 21, 2016, 08:30:40 AM
this is my setting on 3x msi r7 370 2gb

bat conf:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-asia.dwarfpool.com:8008 -ewal 0xwallet -epsw x -dpool http://dcr.pool.mn:4722 -dwal worker -dpsw x

http://imgur.com/EATZZ99


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Trimegistus on April 21, 2016, 09:27:35 AM

I'm running my 2x7950s at 1130/1700(1.2v/1.65v) and 1190/1700(1.23v/1.65v). They get me 23mh/s and 23.5mh/s respectively.

Usually with a standard 7950 the ROM has different memory timings for different ranges of memory clockspeed. I custom tuned the ROM files for my 7950s with a hex editor and set the same tight timings from 1376MHz to 1750MHz+. That way I know the memory timings are not changing between any clock speed I wish to try.

I could edit your ROMs too if you are comfortable with flashing them. But I would only recommend you do it if your GFX cards have a backup ROM switch in case something goes wrong. You should then find you'll get great performance at 1500MHz and beyond.

You need good cooling to maintain stability with the kind of overclocks I'm doing.

I appreciate the offer but that's not exactly my goal  ;D

I don't think the extra heat + extra noise + extra power consumption will be compensated by a few MHs. Besides, I want to have full stability because I don't have the time to nurse my rigs every hour.

My goal was to find settings in line with what I saw mentioned multiples times as a way to save a few watts and increase hashrate at the same time; some kind of underclock.

Anyway, thanks for your sugestions.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Q_R_V on April 21, 2016, 10:16:29 AM
this is my setting on 3x msi r7 370 2gb

bat conf:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-asia.dwarfpool.com:8008 -ewal 0xwallet -epsw x -dpool http://dcr.pool.mn:4722 -dwal worker -dpsw x

http://imgur.com/EATZZ99

Can you tell us your power consumption?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: cryptominer_fuad88 on April 21, 2016, 10:26:30 AM
this is my setting on 3x msi r7 370 2gb

bat conf:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-asia.dwarfpool.com:8008 -ewal 0xwallet -epsw x -dpool http://dcr.pool.mn:4722 -dwal worker -dpsw x

http://imgur.com/EATZZ99

Can you tell us your power consumption?

around 530watt..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: restless on April 21, 2016, 10:52:50 AM
Had anyone made some kind of reliably working "pool failover" with Claymore miner?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Trimegistus on April 21, 2016, 10:53:57 AM
Had anyone made some kind of reliably working "pool failover" with Claymore miner?

I guess he will do it himself in the next release.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Charloz24 on April 21, 2016, 10:54:33 AM
V 3.1 now works very well with my 370 rigs. Only thing is that I must not use clocking option (cclock or mclock) because the program stop. I would like to find a way to optimize my hashing...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: DaveyJones on April 21, 2016, 10:54:42 AM
v3.1:

- reduced delays at shares sending, it must improve speed on pools a bit.

It is not a major update, just found some additional delays in v3.0 so I uplodaded an update. No other changes.

PS. I see dwarfpool has "Sent hashrate" column. How to make it work? I tried eth-proxy + ethminer but it is still empty. If someone can point me how to make it work for Stratum I will add it to my miner.

Stratum method is called, "eth_submitHashrate."  I posted about this earlier in this thread as well (post #569).

See here (eth-proxy relaying method):
https://github.com/Atrides/eth-proxy/blob/d993fc8db84dc09f25b72a34ce69b6977c88ac64/mining_libs/getwork_listener.py#L58-L62

Edit:
Also see (ethminer creating eth_submitHashrate commands):
https://github.com/ethereum/libethereum/blob/8b389757cfc2757965671fa8e080b32aaf65771b/ethminer/MinerAux.h#L536
https://github.com/ethereum/libethereum/blob/6d65d5d1412013381324826ea583e8b3fa9f5f3c/ethminer/FarmClient.h#L37-L47

Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.

or you ask the user atrides here on bitcointalk for help... he is the admin of the dwarfpool ;)


also is there a way you can use your old packer too for those 1% of us where it is not running?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: restless on April 21, 2016, 10:57:47 AM
Had anyone made some kind of reliably working "pool failover" with Claymore miner?

I guess he will do it himself in the next release.
I think using "-wd X" when miner is started with
start /wait
and then in bat file anoher start & goto  may do the thing :S


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: qqqq on April 21, 2016, 11:09:21 AM
Recently i got on my all pc and all ver of miner on different pools

Code:
Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:
DCR: Job timeout, disconnect, retry in 20 sec...


ETH with ethermine pool is ok!


Code:
DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...


it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: restless on April 21, 2016, 11:14:44 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: avirdoz on April 21, 2016, 11:17:42 AM
Recently i got on my all pc and all ver of miner on different pools

Code:
Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:
DCR: Job timeout, disconnect, retry in 20 sec...


ETH with ethermine pool is ok!

Same here.
Upd. coinmine works.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 11:20:46 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

Watchdog closes/restarts miner only if GPU failed.
I'm working on failover, will be added in a day.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Haryford on April 21, 2016, 11:21:21 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: qqqq on April 21, 2016, 11:22:13 AM
Recently i got on my all pc and all ver of miner on different pools

Code:
Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:
DCR: Job timeout, disconnect, retry in 20 sec...


ETH with ethermine pool is ok!

Same here.
Upd. coinmine works.

What the hell, looks like stratum down on that pools simultaneously. Or maybe some new client of DCR was released.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 11:23:10 AM
Today some Decred pools have problems, at least suprnova on dashboard page showed me a message about problems in their backend.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: PandaPanda! on April 21, 2016, 12:11:19 PM
@Claymore I have a request.

I've noticed that you have an auto restart option now when one of the GPUs stops talking to the miner.  However, when the program restarts, it hangs at the POOL connection part (i'm mining in ETH only mode).  What I usually have to do when I encounter this, is close the program, and then restart it manually, then it works. 

I have automated batch files to start your miner.  Can you please add a command line switch which just quits the program rather than restarting it automatically when a GPU fails?  Would be a huge help to me (and probably many others).  I love your miner, and praise it on the eth forums.  Much thanks :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: phzi on April 21, 2016, 12:46:00 PM
Stratum method is called, "eth_submitHashrate."  I posted about this earlier in this thread as well (post #569).

See here (eth-proxy relaying method):
https://github.com/Atrides/eth-proxy/blob/d993fc8db84dc09f25b72a34ce69b6977c88ac64/mining_libs/getwork_listener.py#L58-L62

Edit:
Also see (ethminer creating eth_submitHashrate commands):
https://github.com/ethereum/libethereum/blob/8b389757cfc2757965671fa8e080b32aaf65771b/ethminer/MinerAux.h#L536
https://github.com/ethereum/libethereum/blob/6d65d5d1412013381324826ea583e8b3fa9f5f3c/ethminer/FarmClient.h#L37-L47

Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
I confirmed with dr_pra that the 2nd param is ignored (at least by ethpool/ethermine). If more then one worker connects via a stratum proxy, submitted hashrate doesn't work. If a single worker is used on a connection, the hashrate is assosiated with that worker.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: PandaPanda! on April 21, 2016, 12:48:51 PM
@Claymore I have a request.

I've noticed that you have an auto restart option now when one of the GPUs stops talking to the miner.  However, when the program restarts, it hangs at the POOL connection part (i'm mining in ETH only mode).  What I usually have to do when I encounter this, is close the program, and then restart it manually, then it works. 

I have automated batch files to start your miner.  Can you please add a command line switch which just quits the program rather than restarting it automatically when a GPU fails?  Would be a huge help to me (and probably many others).  I love your miner, and praise it on the eth forums.  Much thanks :)

Never mind.  I just found the updated command line switches list.  I hope adding "-wd 1 -r -1" will do what i asked for above.  Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 12:53:35 PM
@Claymore I have a request.

I've noticed that you have an auto restart option now when one of the GPUs stops talking to the miner.  However, when the program restarts, it hangs at the POOL connection part (i'm mining in ETH only mode).  What I usually have to do when I encounter this, is close the program, and then restart it manually, then it works.  

I have automated batch files to start your miner.  Can you please add a command line switch which just quits the program rather than restarting it automatically when a GPU fails?  Would be a huge help to me (and probably many others).  I love your miner, and praise it on the eth forums.  Much thanks :)

Already done via "-r 1" option, but it's not included in public release yet, it will be included in next update. This option closes miner and calls "reboot.bat" to reboot system, you can change reboot.bat so miner will just be closed (as if you use "-r -1") or do some other actions instead of reboot.

I have just tested restarting by watchdog, it connects to a pool correctly after restarting, so I cannot reproduce the issue you describe. Actually miner just starts itself with the same command line, so I don't see any reasons why it can fail to connect to a pool after restarting.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: thesaltonsea on April 21, 2016, 12:57:05 PM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: PandaPanda! on April 21, 2016, 01:03:35 PM
@Claymore, i'm using your latest beta release.  Will the -wd 1 -r -1 switches work?

And I have a loop in my startup batch file.  So I have to just have a blank reboot.bat file in order for it to jump back to my original batch file loop
?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 01:19:28 PM
Stratum method is called, "eth_submitHashrate."  I posted about this earlier in this thread as well (post #569).

See here (eth-proxy relaying method):
https://github.com/Atrides/eth-proxy/blob/d993fc8db84dc09f25b72a34ce69b6977c88ac64/mining_libs/getwork_listener.py#L58-L62

Edit:
Also see (ethminer creating eth_submitHashrate commands):
https://github.com/ethereum/libethereum/blob/8b389757cfc2757965671fa8e080b32aaf65771b/ethminer/MinerAux.h#L536
https://github.com/ethereum/libethereum/blob/6d65d5d1412013381324826ea583e8b3fa9f5f3c/ethminer/FarmClient.h#L37-L47

Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
I confirmed with dr_pra that the 2nd param is ignored (at least by ethpool/ethermine). If more then one worker connects via a stratum proxy, submitted hashrate doesn't work. If a single worker is used on a connection, the hashrate is assosiated with that worker.

A bit strange approach, is not it? Just send worker name as second param and it would work like a charm.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 01:21:11 PM
@Claymore, i'm using your latest beta release.  Will the -wd 1 -r -1 switches work?

And I have a loop in my startup batch file.  So I have to just have a blank reboot.bat file in order for it to jump back to my original batch file loop
?


"-wd 1 -r -1" will work.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: phzi on April 21, 2016, 01:40:02 PM
A bit strange approach, is not it? Just send worker name as second param and it would work like a charm.
Eth's mining methods are more then a bit strange (and inconsistent between every implementation), indeed.

2 requests (fairly trivial I think):
- show eth/dcr when printing Authorized
- show response time in ms for work submition and response e.g. Share Accepted (80ms)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Mrga666 on April 21, 2016, 01:46:36 PM
I need help from anybody,

I am a big noob and as such I don't know how to configure the .bat file.
I would like to use eu1.ethermine.org:4444 server and I have r9 390x2 graphics card (2x 390), Windows 10 x64 15.12 driver.

Someone please help, I will gift u 0.5 eth coin if you help me.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: murders10 on April 21, 2016, 01:52:51 PM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 01:58:41 PM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 02:00:34 PM
A bit strange approach, is not it? Just send worker name as second param and it would work like a charm.
Eth's mining methods are more then a bit strange (and inconsistent between every implementation), indeed.

2 requests (fairly trivial I think):
- show eth/dcr when printing Authorized
- show response time in ms for work submition and response e.g. Share Accepted (80ms)

Well, I will send worker name as third param then.
Ok, your requests will be added in next update.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: buitanthanh1979 on April 21, 2016, 02:05:16 PM
I need help from anybody,

I am a big noob and as such I don't know how to configure the .bat file.
I would like to use eu1.ethermine.org:4444 server and I have r9 390x2 graphics card (2x 390), Windows 10 x64 15.12 driver.

Someone please help, I will gift u 0.5 eth coin if you help me.

you use Dual Ethereum+Decred or solo Ethereum


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 02:30:15 PM
Recently i got on my all pc and all ver of miner on different pools

Code:
Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:
DCR: Job timeout, disconnect, retry in 20 sec...


ETH with ethermine pool is ok!


Code:
DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...


it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.


the same here i cant connect....

anyone knows?
now i use http..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: citronick on April 21, 2016, 02:50:08 PM
Recently i got on my all pc and all ver of miner on different pools

Code:
Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:
DCR: Job timeout, disconnect, retry in 20 sec...


ETH with ethermine pool is ok!


Code:
DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...


it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.


the same here i cant connect....

anyone knows?
now i use http..


i am pool mining DCRs at zpool.ca - it uses Stratum

Works well with v1.2, v2 and v3.

Rejects about 8-9%% - seems consistent and I dont know how to solve this - I did inform the zpool op about it though.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: _javi_ on April 21, 2016, 03:02:27 PM
may someone post 15.12 dll files for OpenCL ? thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: kanoptx on April 21, 2016, 03:14:56 PM
hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred!  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 04:01:50 PM
hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred!  ;D

You can mine expanse and decred, check OP or readme file:

...
Ethereum forks mining:

   EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1
...

Just set your address add decred parameters to this sample command line.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: hashine on April 21, 2016, 04:14:13 PM
Claymore, thanks for nice work, can you add power limit option?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: kanoptx on April 21, 2016, 04:31:17 PM
hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred!  ;D

You can mine expanse and decred, check OP or readme file:

...
Ethereum forks mining:

   EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1
...

Just set your address add decred parameters to this sample command line.

oh! sorry  :-X didn't see it.

thank you for this kickass miner :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 04:37:45 PM
Recently i got on my all pc and all ver of miner on different pools

Code:
Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:
DCR: Job timeout, disconnect, retry in 20 sec...


ETH with ethermine pool is ok!


Code:
DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...


it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.



any news???


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 04:40:02 PM
pool.mn works now with stratum....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 04:42:19 PM
suprnova also...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: sam1 on April 21, 2016, 04:45:44 PM
I connected to http://dcr.pool.mn:4723 when it was problems with Stratum and got bigger hashrate and less rejected shares. So, I'm not confident in need to use stratum again


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 04:55:10 PM
for me its the oposite...
+/-10% rejects without stratum


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: sam1 on April 21, 2016, 04:57:00 PM
for me its the oposite...
+/-10% rejects without stratum
And with? I have 5% without and little bit more with


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Realetim on April 21, 2016, 05:04:44 PM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 05:07:19 PM
BTC
for me its the oposite...
+/-10% rejects without stratum
And with? I have 5% without and little bit more with


i mine dcr for 1/2 hour with 0 % rejects

but the normal for me (( beforE DDOS )) was 2-2.5% rejects (( dcr )


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: citronick on April 21, 2016, 05:14:11 PM
what the meaning of "--farm-recheck 600" again?

Note: I googled it but couldn't find a good answer - any experts out there?

anyone can help me understand this "--farm-recheck" ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Claymore on April 21, 2016, 05:14:34 PM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: sam1 on April 21, 2016, 05:17:15 PM
anyone can help me understand this "--farm-recheck" ?
Check for new task every x.xxx seconds


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: shacky on April 21, 2016, 05:33:28 PM
@Claymore

Thanks for this kind of software!!!

I want to know if it posible to disable one GPU for mining, for example: I wan to mine with GPU 1,2,3. And exclude the GPU 0.

Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: qqqq on April 21, 2016, 05:34:02 PM
So what it was ? DDOS ? I mean stratum error on few pools ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Maxikosw on April 21, 2016, 05:36:29 PM
I take my word back. This newer version is mutch better. Only thing that i miss is failover servers.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Maxikosw on April 21, 2016, 05:38:43 PM
@Claymore

Thanks for this kind of software!!!

I want to know if it posible to disable one GPU for mining, for example: I wan to mine with GPU 1,2,3. And exclude the GPU 0.

Thanks

you just dont put that 0 on the list so its not mining on number 0. like -di 123


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 05:40:50 PM
So what it was ? DDOS ? I mean stratum error on few pools ?

https://bitcointalk.org/index.php?topic=1290358.new#new


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: revelacaogr on April 21, 2016, 05:43:36 PM
....and they try again!I have some stops in pool.mn periodically....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: qqqq on April 21, 2016, 05:44:43 PM
So what it was ? DDOS ? I mean stratum error on few pools ?

https://bitcointalk.org/index.php?topic=1290358.new#new

Thank you.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: citronick on April 21, 2016, 06:28:52 PM
anyone can help me understand this "--farm-recheck" ?
Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 21, 2016, 07:00:04 PM
Problems on DCR pools forced me to check my code again and again to be sure that these problems are not related to the miner and I rewrote some routines to improve Stratum support for Decred.

v3.2:

- reduced number of rejected shares for Decred-Stratum.
- miner sends its current hashrate to pool, some pools have "reported hashrate" column and you can see miner hashrate there.
- miner shows how long it takes pool to accept share.
- option "-r 1" closes miner and calls "reboot.bat" if some GPU failed, so you can create "reboot.bat" to perform any actions.
- Bug fixes, a few minor improvements.


I'm still working on failover and other new features.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: qqqq on April 21, 2016, 07:04:26 PM
Quote
- miner shows how long it takes pool to accept share.

I really like this feature. Thank you.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 21, 2016, 07:30:23 PM
Problems on DCR pools forced me to check my code again and again to be sure that these problems are not related to the miner and I rewrote some routines to improve Stratum support for Decred.

v3.2:

- reduced number of rejected shares for Decred-Stratum.
- miner sends its current hashrate to pool, some pools have "reported hashrate" column and you can see miner hashrate there.
- miner shows how long it takes pool to accept share.
- option "-r 1" closes miner and calls "reboot.bat" if some GPU failed, so you can create "reboot.bat" to perform any actions.
- Bug fixes, a few minor improvements.


I'm still working on failover and other new features.

man u r very active...
u deserve every penny .....
thks again


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: madmartyk on April 21, 2016, 07:37:49 PM
Woo Hoo back to dual mining (I was getting about 30% rejects with 3.1).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: CorePrime95 on April 21, 2016, 07:38:56 PM
I tested Claymore's ethminer vs the regular ethminer
R390 @1100/1500 win7 64 and Crimson 15.12
Normal ethminer: ca. 30Mh/s
Claymore's ethminer: ca. 31.5Mh/s
Indeed a speedup of 5%, excellent!!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marvell1 on April 21, 2016, 07:39:05 PM
Problems on DCR pools forced me to check my code again and again to be sure that these problems are not related to the miner and I rewrote some routines to improve Stratum support for Decred.

v3.2:

- reduced number of rejected shares for Decred-Stratum.
- miner sends its current hashrate to pool, some pools have "reported hashrate" column and you can see miner hashrate there.
- miner shows how long it takes pool to accept share.
- option "-r 1" closes miner and calls "reboot.bat" if some GPU failed, so you can create "reboot.bat" to perform any actions.
- Bug fixes, a few minor improvements.


I'm still working on failover and other new features.

man u r very active...
u deserve every penny .....
thks again


great chancges, any thoughts on setting it up to work with that solo mining proxy ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: gami82 on April 21, 2016, 07:43:59 PM
No "sent hashrate" on dwarfpool with v3.2 !?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Zulucia on April 21, 2016, 07:53:52 PM
anyone can help me understand this "--farm-recheck" ?
Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Pustul on April 21, 2016, 08:20:13 PM
anyone can help me understand this "--farm-recheck" ?
Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

Claymore, does the --farm-recheck really change the way the miner mines? Because on ethminer-genoil with stratum, it only modifiy the rate at which hashing speed is calculated. On your miner though, the display of the hashing speed is not affected by this it seems.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Claymore on April 21, 2016, 08:33:14 PM
anyone can help me understand this "--farm-recheck" ?
Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

Claymore, does the --farm-recheck really change the way the miner mines? Because on ethminer-genoil with stratum, it only modifiy the rate at which hashing speed is calculated. On your miner though, the display of the hashing speed is not affected by this it seems.

--farm-recheck is not supported by my miner. Moreover, it is for HTTP to work with Stratum proxy, my miner uses Stratum directly.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Flexystar on April 21, 2016, 08:33:23 PM
Waiting linux port....

Reinstall OS on all rigs for use miner)) LOL?  :o


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.0
Post by: Pustul on April 21, 2016, 08:36:56 PM
anyone can help me understand this "--farm-recheck" ?
Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

Claymore, does the --farm-recheck really change the way the miner mines? Because on ethminer-genoil with stratum, it only modifiy the rate at which hashing speed is calculated. On your miner though, the display of the hashing speed is not affected by this it seems.

--farm-recheck is not supported my my miner. Moreover, it is for HTTP to work with Stratum proxy, my miner uses Stratum directly.

Ok, that's what I thought but the messages talking about it made me doubt it. Thank you for the confirmation!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: sam1 on April 21, 2016, 09:11:21 PM
Wait for finding meaning of life while mining ETH and DCR in next version


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Nintendocore on April 21, 2016, 09:56:08 PM
It is good that versions renovate regularly and less shortages stand.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: 9600 on April 21, 2016, 10:01:18 PM
So this one's got me stumped.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool coinotron.com:3334 -ewal user.worker -esm 2 -epsw pass -dpool stratum+tcp://dcr.suprnova.cc:9112 -dwal user.worker -dpsw pass -allpools 1

Quote
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
ETH: Stratum - Connected
 DCR: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
 DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
 DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
 DCR: Stratum - Connected



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: merc84 on April 21, 2016, 10:07:30 PM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 21, 2016, 10:09:26 PM
So this one's got me stumped.

Quote
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
ETH: Stratum - Connected
 DCR: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
 DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
 DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
 DCR: Stratum - Connected



Wrong ports and/or protocols. It's a good idea to show your command line if you want to know more details.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: DMaster2008 on April 21, 2016, 10:29:08 PM
Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
It's not DCR stratum but DCR HTTP.
DCR Stratum at suprnova is on port 2252.

connecting to 'coinotron.com' <178.217.186.125> port 3334
It's not ETH stratum either. ETH stratum at coinotron is on port 3344.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: 9600 on April 21, 2016, 10:36:04 PM
Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
It's not DCR stratum but DCR HTTP.
DCR Stratum at suprnova is on port 2252.

connecting to 'coinotron.com' <178.217.186.125> port 3334
It's not ETH stratum either. ETH stratum at coinotron is on port 3344.

*facepalm*

That is all.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: shacky on April 21, 2016, 11:05:41 PM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Thanks!!  But Im not sure if this works with this miner. @Claymore can you confirm this?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: spiete on April 21, 2016, 11:12:18 PM
What settings do i need to run pc with x1 r9 380x and x2 r7 370?

Thanks!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: omnik on April 21, 2016, 11:13:40 PM
Trying v3.2 "out of the box"...

1x 270, 2x 270X rig, all clocked 920/1400.

42.572MHs

Basic bat, no additions.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: greatreal7777 on April 21, 2016, 11:15:15 PM
Please, make a mode only for mining Decred for rigs with graphics cards 1 GB memory.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Trimegistus on April 21, 2016, 11:50:16 PM
The main advantage of this miner is the stability of operation!

One of my rigs is running two instances; two 270x are running with v2.0, and two 7950 are running with v3.1.

100% shares accepted on Dwarf's pool and a nice speed increment.

But just now, my two instances created the new DAG file (epoch #47) and none of them crashed!

Amazing!

With the other ETH miners, almost every DAG change was a problem, but with this miner it's just a minor bump for my rigs!

Keep up the good work Claymore!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Prelude on April 22, 2016, 01:57:33 AM
Claymore, do you have an ETA on the solo version?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: buitanthanh1979 on April 22, 2016, 02:14:52 AM
Hi Claymore's

I like your software. I have an idea.
Algo: Dagger-Hashimoto include
Code: ETH and Code: EXP
You can Dual Ethereum + Decred after an hour changed Expanse + Decred ?
Ex: Starting mine Ethereum + Decred after an hour your Devfee operation. After you change Devfee ending Then change Expanse + Decred mine. After you change Devfee ending Then change Ethereum + Decred mine. The process is repeated, so after 24 hours I have 3 currencies Ethereum + Expanse + Decred


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: hoper on April 22, 2016, 04:29:10 AM
Im have miner crash at any version 3.x
1.x 2.x work fine

Im using win7 x64 with 15.200.1062.1004 drivers

logs https://yadi.sk/d/_riYs8P_rCDDi

what additional info need to debug?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 22, 2016, 05:15:08 AM
Claymore is the man. Thanks for addressing my 2 requests so quickly.

Edit: can you add the timer output to rejects too?

Only thing this miner needs to be perfect now, IMO, is failover support.

Also, DCR changes seem to have had a positive impact on rejects.  I'm under 0.5% rejected shares now (need to test for longer, ofc, but looks great).


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: CorePrime95 on April 22, 2016, 05:19:34 AM
No "sent hashrate" on dwarfpool with v3.2 !?

Tested 3.2 the whole night, http://ethermine.org shows current hashrate all the time.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: MysteryX on April 22, 2016, 05:47:40 AM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Thank you, this worked for me!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: gami82 on April 22, 2016, 06:04:10 AM
No "sent hashrate" on dwarfpool with v3.2 !?

Tested 3.2 the whole night, http://ethermine.org shows current hashrate all the time.

Yes, but this "current hashrate" is calculated by your submits. On Dwarfpool there is a second Parameter "Sent Hashrate". This column is emty.

By the way ... great work claymore!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: rajeshgarnaik on April 22, 2016, 06:11:35 AM
i am geting 50 % recjected shares in dcr and in stratum mode 100% recjected shares.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: thesaltonsea on April 22, 2016, 06:25:11 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed.
With 3.2 and -wd 0 and -r -1 , i found again my rig rebooted and freezed on boot screen , there was no such problems with the old versions of the miner .


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: merc84 on April 22, 2016, 07:52:39 AM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Thanks!!  But Im not sure if this works with this miner. @Claymore can you confirm this?

It works for me.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Zitdadast on April 22, 2016, 08:03:21 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed.
With 3.2 and -wd 0 and -r -1 , i found again my rig rebooted and freezed on boot screen , there was no such problems with the old versions of the miner .

I have the same problem. Maybe you can underclock a bit? The newer version is faster, so stress the GPU more.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: JLC_km on April 22, 2016, 08:28:06 AM
Dual miner ETH+DCR calculator  cryptoage.com (http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: ShootNik on April 22, 2016, 08:43:32 AM
Waiting linux port....

Reinstall OS on all rigs for use miner)) LOL?  :o
Claymore ignore all linux comments in thread - apparently we will not see linux ver, but why just do not write about that...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: merc84 on April 22, 2016, 08:53:42 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed.
With 3.2 and -wd 0 and -r -1 , i found again my rig rebooted and freezed on boot screen , there was no such problems with the old versions of the miner .

I have the same problem. Maybe you can underclock a bit? The newer version is faster, so stress the GPU more.

Try reduce intensity, also may help to put a timeout in batfile to allow windows sufficient time to load.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Facinat on April 22, 2016, 09:11:53 AM
I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner :(

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.
.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart  :-[

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed.
With 3.2 and -wd 0 and -r -1 , i found again my rig rebooted and freezed on boot screen , there was no such problems with the old versions of the miner .

I have the same problem. Maybe you can underclock a bit? The newer version is faster, so stress the GPU more.

Try reduce intensity, also may help to put a timeout in batfile to allow windows sufficient time to load.

What intensity would you recommend for the -ethi? What is teh range of the intnensity? 0-16 or higher?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 22, 2016, 09:19:55 AM
Sorry idk intensity range it should be either in the readme or OP, also its a good idea to set a timeout in the bat to give windows time to load fully. For example as first line in your batfile
timeout /t 30
this will make the batfile wait 30 secs to execute.

Edit: Default is 16 so set it lower if using timeout doesnt fix problem.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 22, 2016, 09:56:52 AM
Yes it is a good idea to set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system. Note "-ethi 4" can reduce mining speed a bit.
Added to OP.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: qqqq on April 22, 2016, 10:19:36 AM
Claymore how things are going with stratum implementation for solo ver? Maybe you could do both versions simultaneously?  


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: restless on April 22, 2016, 10:31:19 AM
Sorry idk intensity range it should be either in the readme or OP, also its a good idea to set a timeout in the bat to give windows time to load fully. For example as first line in your batfile
timeout /t 30
this will make the batfile wait 30 secs to execute.

Edit: Default is 16 so set it lower if using timeout doesnt fix problem.
ping 127.0.0.1 -n 30
Works OOB on all Windows versions since 95 :D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: thesaltonsea on April 22, 2016, 10:59:07 AM
Yes it is a good idea to set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system. Note "-ethi 4" can reduce mining speed a bit.
Added to OP.

I will test with ethi 4, but i got other idea - every night at 4 my routers restarts (thats how my network works) , and there is no connection for 2-3minutes. It was ok with the old versions of the miner, it was continue to mine when the network is back ... Maybe in 3.0 some timers kickout or something and restarts my pc ? (I dont use any bat files for autostart mining on windows boot or to restart)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: CorePrime95 on April 22, 2016, 11:55:56 AM
ping 127.0.0.1 -n 30
Works OOB on all Windows versions since 95 :D

That is a good tip, since the timeout conmand does not exist in older Windows versions.

Ive noticed that my desktop is laggy when using two cards (both AMD), however with a single card it works fine.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Beoga on April 22, 2016, 12:15:51 PM
Will this miner work with Windows 8 (not 8.1)?
There is no 15.12 Drivers for Win 8.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 22, 2016, 12:23:21 PM
Dual miner ETH+DCR calculator  cryptoage.com (http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html)

niiice! thx!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: Gigadroid on April 22, 2016, 12:53:05 PM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Thank you, this worked for me!

So can we update our drivers to 16.4.1, paste the DLL files in our miner directory and still get a normal hashrate?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: ldw-com on April 22, 2016, 01:18:13 PM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Thank you, this worked for me!

So can we update our drivers to 16.4.1, paste the DLL files in our miner directory and still get a normal hashrate?

I upgraded to 16.4.1 without pasting DLL files and still getting, no getting even better hashrates than before....


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: alpsea on April 22, 2016, 01:39:17 PM
Ver 3.2 / 3x R7 370 FULL OC / driver 15.12
-eth 41mh/s
-dcr 610mh/s
—————•—————
Coinotron: max 46mh eth
Supernova: max 1.2gh dcr
it's great !


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.1
Post by: merc84 on April 22, 2016, 01:58:40 PM
may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0


Thank you, this worked for me!

So can we update our drivers to 16.4.1, paste the DLL files in our miner directory and still get a normal hashrate?

You can update or downgrade use what ever driver u want if you have the dll's in your miner dir, the miner will use those dll's before searching for installed ones.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 22, 2016, 02:10:16 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: avirdoz on April 22, 2016, 02:18:20 PM
I have got best results on suprnova.cc pool.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 22, 2016, 02:20:33 PM
the new version boosted my hashrate and fixed the "swings" on the pool. i would advice everyone to download the new version!  ;D Once again, thx claymore!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: totikk on April 22, 2016, 02:21:11 PM
Good afternoon.
Firstly thanks for the miner. It's great!

Secondly, I want to ask for help / clarification. I know it's probably not a good topic for that, but I see people here experienced.
Question about Dekred mining.
In priogram I see constant speed DCR (550MH) but the site show me jumps from 300 to 600 ... (Not onle this miner, in all that I use. T try on coinmine and suprnova.)
And I am very confusing section block progress on the site.  I think it should be from 0 to 100%, and I have it often passes for 100% and get 130 ... 150, and even 420%
Accordingly, there is no reward for this time ....
If necessary, I can show a screenshot.

Sorry for mistakes, English is not my native language.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 22, 2016, 02:28:32 PM
Good afternoon.
Firstly thanks for the miner. It's great!

Secondly, I want to ask for help / clarification. I know it's probably not a good topic for that, but I see people here experienced.
Question about Dekred mining.
In priogram I see constant speed DCR (550MH) but the site show me jumps from 300 to 600 ... (Not onle this miner, in all that I use. T try on coinmine and suprnova.)
And I am very confusing section block progress on the site.  I think it should be from 0 to 100%, and I have it often passes for 100% and get 130 ... 150, and even 420%
Accordingly, there is no reward for this time ....
If necessary, I can show a screenshot.

Sorry for mistakes, English is not my native language.



the new version fixed that for me. install it if you havent. also, if you're not using stratum, do.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: totikk on April 22, 2016, 02:34:22 PM
I'am on version 3.2 And I use stratum.
And I see this on other Decred miners((
http://i.piccy.info/i9/d9c9db201818a09002342e5a8a92bf4b/1461335864/151726/1027577/Snymok.jpg


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 22, 2016, 03:12:04 PM
v3.2 report

5 x MSI R9-390 with MSI Afterburner settings: MV: -100v, CC: 1015Mhz, MC: 1500Mhz
Crimson 15.12 / Win8.1 / Celeron 1840 / ASrock H81-BTC / 8GB RAM / 16GB Windows Virtual Memory

Runtime: 3 hours

ETH, 149.6 Mh/s (29.9Mh/s per card). 0 Rejects @ ethpool.org
DCR, 2244 Mh/s (448.8Mh/s per card). 1+% Rejects @ zpool.ca

Very big improvements on DCR rejects reduction, from 8-9% to 1-2%

Great work Mr. Claymore. Cant wait for the solo mining version.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 22, 2016, 03:21:27 PM
-epsw x seems to set worker name to x for dwarfpool, if i change this all eth shares are rejected is it possible to set different worker name for different rigs, as sent hashrate only displays for 1/2 rigs.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 22, 2016, 03:25:26 PM
-epsw x seems to set worker name to x for dwarfpool, if i change this all eth shares are rejected is it possible to set different worker name for different rigs, as sent hashrate only displays for 1/2 rigs.


use -eworker <your worker name> -epsw x -esm 0


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: knobson on April 22, 2016, 03:56:53 PM
Pool returned error #56.
 DCR: Failed to check work on pool, retry in 20 sec...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Pustul on April 22, 2016, 04:06:28 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 22, 2016, 04:09:34 PM
Pool returned error #56.
 DCR: Failed to check work on pool, retry in 20 sec...

try removing the -esm 0, and let the dualminer do auto detect


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: melloyellow on April 22, 2016, 04:33:50 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: minerkin on April 22, 2016, 05:29:26 PM
I use my own eth-proxy. with ethminer, the syntax to connect to my proxy is:

ethminer -G -F http://127.0.0.1:8080/rig1

How do I connect to my proxy and assign a worker name for ETH side of the miner?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dominuspro on April 22, 2016, 05:29:35 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: gami82 on April 22, 2016, 05:48:16 PM
I use the miner v3.2 on coinotron for testing.

EthDcrMiner64.exe -mode 1 -epool coinotron.com:3344 -ewal user.pass -esm 2 -epsw x -dbg -1 -allpools 1

2 questions:
1. I get a message shortly after start bat: "CANNOT Parse JSON!" Is this a warning or an error?
2. Is "-allpools 1" necessary?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 22, 2016, 05:55:22 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Flomess on April 22, 2016, 06:04:07 PM
I am using "standard" settings for my 7970

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: avirdoz on April 22, 2016, 06:07:55 PM
I am using "standard" settings for my 7970

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
What clocks are you using? For stock it's normal h/r.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Flomess on April 22, 2016, 06:24:32 PM
I am using "standard" settings for my 7970

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
What clocks are you using? For stock it's normal h/r.

Oh; i thought i could get my standard DCR hash (about 1.3 Gh/s) PLUS my standard ETH hash. I guess it whould have been too good to be true  :)
Stock clocks yep


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: madmartyk on April 22, 2016, 06:49:46 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Pustul on April 22, 2016, 06:50:41 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings :P? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 22, 2016, 06:55:03 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings :P? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.

Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.

Here is my miner settings, with Cat 16.3.2

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1

I use intensity of 4 on my display card so as not to make my PC unusable :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Termie on April 22, 2016, 07:01:39 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: sam1 on April 22, 2016, 07:06:40 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
Please, post here bat file to Coinotrone


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Pustul on April 22, 2016, 07:08:27 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings :P? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.

Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.

Here is my miner settings, with Cat 16.3.2

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1

I use intensity of 4 on my display card so as not to make my PC unusable :)

Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc.

Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dominuspro on April 22, 2016, 07:13:57 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
Please, post here bat file to Coinotrone

I just switched back to... I was there before Claymore came with this great miner :)

my bat:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal user.rig -esm 2 -epsw password -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.rig -dpsw password -dcri 45 -allpools 1 -cclock 1165
pause

change user.rig and password
Take care also on the -dcri and -cclock to suit your needs ;)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: melloyellow on April 22, 2016, 07:19:18 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.

Which pool are you at and is that 70mh/s the calculated hashrate at the pool?  According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows.  For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 22, 2016, 07:20:59 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings :P? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.

Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.

Here is my miner settings, with Cat 16.3.2

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1

I use intensity of 4 on my display card so as not to make my PC unusable :)

Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc.

Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast?

On my 7950 etha 1 is definitely faster, I don't think it's any different on the 7970. I'm sure claymore could explain why that would be.

I applied an overclock to all three cards on the ROM, it's a safe stable overclock for gaming. But for Eth mining I use MSI Afterburner to get a bit more.

The 2x7950 default clocks are 825/1250, I modified ROM with 1080/1500 and overclock to 1130/1700(This card is sandwiched between the other two and runs hot) and 1190/1700(This is the bottom card and runs much cooler than the other two) with Afterburner. These get me 23 and 23.5mh/s respectively.

The 7970 I think had 1040/1400, I modified ROM with 1080/1500 and use afterburner to overclock to 1100/1700. When it wasn't the display card and in a cooler PC it would do 1240 on the core! But as the display card in my main PC, what I'm using to type this, it artifacts at 1140 on the core.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: madmartyk on April 22, 2016, 07:30:50 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.

Which pool are you at and is that 70mh/s the calculated hashrate at the pool?  According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows.  For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.

I have had my miners down to update the software.

Reported Hashrate: 70.4 MH/s
Note: This is the hashrate as reported by your miner to the pool.
Effective Current Hashrate: 72.2 MH/s
Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal.
Effective Average Hashrate (last 24h): 68.1 MH/s
Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: spiete on April 22, 2016, 07:54:29 PM
x1 380x and x2 370

Got this settings


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0xA0F5578094e713c58B901eC43FB58bbbD7A63372 -epsw x -eworker dw1



What does incorrect share means?

I didnt overclocked my GPUs.


Also 46 seconds for one round is okay? Or what 46 seconds mean?

And how do i check shares for last hour? Not for every time.

With genoil it has 0.2 (--farm-recheck 100) second for round.

Also did my config is set right? Or there is something that i can modify?

And do i need to run geth? Or dwarf proxy?


Thanks!

Update###


Is this okay that i got 1 rejected share after 5 minutes?



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: melloyellow on April 22, 2016, 08:18:44 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.

Which pool are you at and is that 70mh/s the calculated hashrate at the pool?  According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows.  For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.

I have had my miners down to update the software.

Reported Hashrate: 70.4 MH/s
Note: This is the hashrate as reported by your miner to the pool.
Effective Current Hashrate: 72.2 MH/s
Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal.
Effective Average Hashrate (last 24h): 68.1 MH/s
Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window.

Thanks.  So you and dominuspro are both at ethermine.  I wish these pools would show rejects....maybe that's what is going on with dominuspro.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 22, 2016, 08:23:23 PM
I tried these settings with the setting for coinotron but I get this



15:14:16:804   1570   Need to check DAG file (epoch #46), starting...

15:14:16:945   914   got 101 bytes
15:14:16:945   914   buf: {"error": null, "id": 2, "result": true}
{ "id": 9876, "method": "client.get_version", "params": []}

15:14:16:945   914   parse packet: 36
15:14:16:945   914   ETH: Authorized
15:14:16:945   914   remove first packet 54
15:14:16:945   914   new buf size: 54
15:14:16:945   914   parse packet: 54
15:14:16:945   914   send: {"error": null, "jsonrpc": "id": 9876, "result": "eth 1.0"}


15:14:16:945   914   new buf size: 0
15:14:17:148   914   got 66 bytes
15:14:17:148   914   buf: {"id": , "result": null, "error": [51, "JSON parse error", null]}

15:14:17:148   914   parse packet: 57
15:14:17:148   914   Cannot parse JSON!
15:14:17:148   914   new buf size: 0
15:14:19:165   660   OC v5, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
15:14:22:170   660   OC v5, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst


It's a minor bug, will be fixed in next update: miner sends incorrect version answer, then pool sends incorrect report about the error, therefore you see this warning. You still can mine, here is my command line that you can use as start point, very similar to sample from OP:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: madmartyk on April 22, 2016, 08:32:01 PM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.

Which pool are you at and is that 70mh/s the calculated hashrate at the pool?  According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows.  For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.

I have had my miners down to update the software.

Reported Hashrate: 70.4 MH/s
Note: This is the hashrate as reported by your miner to the pool.
Effective Current Hashrate: 72.2 MH/s
Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal.
Effective Average Hashrate (last 24h): 68.1 MH/s
Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window.

Thanks.  So you and dominuspro are both at ethermine.  I wish these pools would show rejects....maybe that's what is going on with dominuspro.

I can see the rejects on the miners, very few.

Since loading the new version the 290x has 634 shares and 0 rejects, and the 280x's have 876 shares and 0 rejects


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Pustul on April 22, 2016, 08:47:49 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea :)

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings :P? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.

Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.

Here is my miner settings, with Cat 16.3.2

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1

I use intensity of 4 on my display card so as not to make my PC unusable :)

Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc.

Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast?

On my 7950 etha 1 is definitely faster, I don't think it's any different on the 7970. I'm sure claymore could explain why that would be.

I applied an overclock to all three cards on the ROM, it's a safe stable overclock for gaming. But for Eth mining I use MSI Afterburner to get a bit more.

The 2x7950 default clocks are 825/1250, I modified ROM with 1080/1500 and overclock to 1130/1700(This card is sandwiched between the other two and runs hot) and 1190/1700(This is the bottom card and runs much cooler than the other two) with Afterburner. These get me 23 and 23.5mh/s respectively.

The 7970 I think had 1040/1400, I modified ROM with 1080/1500 and use afterburner to overclock to 1100/1700. When it wasn't the display card and in a cooler PC it would do 1240 on the core! But as the display card in my main PC, what I'm using to type this, it artifacts at 1140 on the core.

Thank you for all the details! Haha I remember when I had the 7970 and 2x 290s in my mid tower, it was tight :P Led me to build a rig and add 2 more 290s and replace the three gpus in the tower by 270s to lower the heat. Anyway I ended up selling everything but the 7970 when altcoin mining became so unprofitable in 2014.

Back to eth mining ;) I reinstalled the drivers after a nice cleanup and now the oc is working fine, I think my clocks were stuck before, that's why I didn't saw the difference. 1240 is really nice! I never was able to go beyond 1200 :P It seems 1650 memory is the max for my card. I've got 21.6 MH/s with 1150/1650, it's a nice improvement compared to stock! Oh and -etha 0 is definitively better for me, but maybe that's the reason you can oc more and in the end get a better hashrate.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 22, 2016, 09:01:56 PM
and it has this error http://i.imgur.com/VlsfJcx.jpg

Again, it is minor bug and you can mine. Start miner and wait.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dannygroove on April 22, 2016, 09:06:36 PM
Still getting around 10% rejection on DCR/Suprnova. Don't know if its miner's fault or Suprnova's. Can someone recommend a good DCR pool?

Problem solved as soon as I made the switch to Stratum.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 22, 2016, 09:28:57 PM
maxminers


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Lucky - Luciano on April 22, 2016, 09:35:32 PM
I at Miner v3.2 has even 20-25% reject at the Suprnova ports:
Diff 1: http://dcr.suprnova.cc:9110
Diff 4: http://dcr.suprnova.cc:9111
  However, the dcr.maxminers.net:  „stratum+tcp://dcr.maxminers.net:7777“  I have only 0.84 rejected. Is it a problem exclusive to the pool ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 22, 2016, 09:38:57 PM

Again, it is minor bug and you can mine. Start miner and wait.
it crashes i guess it should be because i am using 15.11.1 I have to download 15.12


dont change the driver
use  only the  opencl.dlls  from 15.12 end put it in the miners file...



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 22, 2016, 09:39:58 PM
I at Miner v3.2 has even 20-25% reject at the Suprnova ports:
Diff 1: http://dcr.suprnova.cc:9110
Diff 4: http://dcr.suprnova.cc:9111
  However, the dcr.maxminers.net:  „stratum+tcp://dcr.maxminers.net:7777“  I have only 0.84 rejected. Is it a problem exclusive to the pool ?


sorry pool.mn have auto vardiff and not maxminers
i prever pool.mn
1-1.5% rejects


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Lucky - Luciano on April 22, 2016, 09:56:32 PM
I at Miner v3.2 has even 20-25% reject at the Suprnova ports:
Diff 1: http://dcr.suprnova.cc:9110
Diff 4: http://dcr.suprnova.cc:9111
  However, the dcr.maxminers.net:  „stratum+tcp://dcr.maxminers.net:7777“  I have only 0.84 rejected. Is it a problem exclusive to the pool ?


sorry pool.mn have auto vardiff and not maxminers
i prever pool.mn
1-1.5% rejects

  Ok. Thank you. I'll try the pool "pool.mn" tomorrow. The "dcr.maxminers.net" I earned only about 0.3 DCR for half a day with about 2000 Mh / s


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 22, 2016, 10:03:29 PM
I at Miner v3.2 has even 20-25% reject at the Suprnova ports:
Diff 1: http://dcr.suprnova.cc:9110
Diff 4: http://dcr.suprnova.cc:9111
  However, the dcr.maxminers.net:  „stratum+tcp://dcr.maxminers.net:7777“  I have only 0.84 rejected. Is it a problem exclusive to the pool ?


sorry pool.mn have auto vardiff and not maxminers
i prever pool.mn
1-1.5% rejects

  Ok. Thank you. I'll try the pool "pool.mn" tomorrow. The "dcr.maxminers.net" I earned only about 0.3 DCR for half a day with about 2000 Mh / s
0.3 for 2G is little

use this to see how much u mast earn +/-
http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 22, 2016, 10:06:22 PM
For anyone interested, I am having best results/profitability on my R9 290 rigs with:
- AMD 15.7.1 Driver (only _extract_ installer package [do not install], load drivers thru Device Manager) - allows downclocking and results in the least GPU usage dips.
- Copy amdocl64.dll from AMD 15.12 to miner folder - brings up hashrate _very_ slightly
- Stilt's mining BIOS for 290 - lower power usage and slightly higher hashrate
- Downclock memory to 1125 (lower timing strap, results in the same performance as 1250 with lower power consumption)
- Overclock core as far as is stable (I use 1080mhz now; used to use 1100, but with increasing ambient temperatures have pulled back to 1080 for stability)
- decred intensity at 33 (lose ~300Kh/s Ethash in return for 50MH/s decred)

With version 3.2, I am getting ~0.5% DCR rejects, and essentially 0% Eth rejects.
31MH/s on Ethash and 500MH/s Decred for each GPU.
Ethereum pool effective hash is ~3% below reported (makes sense given tiny GPU usage dips and 2% devfee).

Best part is the stability.

Keep rockin' Claymore!

--

Claymore: Can you please add the share timer to rejected shares too?

--

revelacaogr/Lucky - Luciano: pool.mn doesn't actually have vardiff, their page header is lying.  Their stratum just stays at diff 1 permanently.  Only site with working vardiff I've seen is coinmine, but their reject rate is pretty bad from my testing.

That said, I'm using pool.mn right now as the profitability and reject rates have been the best.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 22, 2016, 10:09:12 PM
use this to see how much u mast earn +/-
http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html
That calculator is completely wack.  You should get double the Ethereum output that it suggests.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 22, 2016, 10:24:50 PM
with stock clocks?
i dont think so


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 22, 2016, 10:35:32 PM
with stock clocks?
i dont think so
Yes, it says 2.5Eth at stock clock hashrates (for 15x 290), but you should earn about 5Eth. That calculator is totally wrong.  With overclocks, it's closer to 6Eth.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Termie on April 22, 2016, 10:48:47 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?

Result for me after a few hours (R9 Nano): more GPU load, more heat, same hashrate.
And repeated "outdated share found - skip"-messages.
Under these circumstances, no advantages and so I return to feeless genoil.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 22, 2016, 10:49:47 PM
Still getting around 10% rejection on DCR/Suprnova. Don't know if its miner's fault or Suprnova's. Can someone recommend a good DCR pool?

Problem solved as soon as I made the switch to Stratum.

Is the only stratum port for suprnova diff 1 or am i missing something?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 22, 2016, 10:49:54 PM
with my hash this calc works fine

with this also:
http://ethereum-mining-calculator.com/


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 22, 2016, 10:55:37 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?

Result for me after a few hours (R9 Nano): more GPU load, more heat, same hashrate.
And repeated "outdated share found - skip"-messages.
Under these circumstances, no advantages and so I return to feeless genoil.

I think optimisations for Fiji cards are still a todo. Claymore's last major release mainly improved slower cards.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 22, 2016, 10:57:54 PM
Still getting around 10% rejection on DCR/Suprnova. Don't know if its miner's fault or Suprnova's. Can someone recommend a good DCR pool?

Problem solved as soon as I made the switch to Stratum.

Is the only stratum port for suprnova diff 1 or am i missing something?
Yup. Not missing anything. The only DCR pool I have tried with working vardiff is coinmine.  Diff 1 with stratum works fine tho, just excessive load on the pool servers. Pool.mn says they have vardiff, but it doesn't actually.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dannygroove on April 22, 2016, 10:58:10 PM
Still getting around 10% rejection on DCR/Suprnova. Don't know if its miner's fault or Suprnova's. Can someone recommend a good DCR pool?

Problem solved as soon as I made the switch to Stratum.

Is the only stratum port for suprnova diff 1 or am i missing something?

Yes, I believe so. All of my workers have diff 1.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 12:24:45 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Trimegistus on April 23, 2016, 12:32:25 AM
Is anyone here using any of the old Stilt's modified bios for the 7950s or the 280Xs?

Is it worth it?

If the answer is yes, will the mods work only for ETH or for other algos as well (for instance X11)?

Thx  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 01:00:56 AM
Currently I been mining just Ethereum on Coinotron with an 3GB R9 280X and a 4GB R9 380X and mining almost a coin in 24 hours.  How productive is this dual mining of Decred and Ethereum?  Also what pools are you using to mine both are you using a single pool or do you have a pool for one and another pool for the other?  Thanks for the info.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: adaseb on April 23, 2016, 01:06:30 AM
Is anyone here using any of the old Stilt's modified bios for the 7950s or the 280Xs?

Is it worth it?

If the answer is yes, will the mods work only for ETH or for other algos as well (for instance X11)?

Thx  ;D


FOr my GPU didn't make a difference


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 01:46:39 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: hoper on April 23, 2016, 03:32:02 AM
Im have miner crash at any version 3.x
1.x 2.x work fine

Im using win7 x64 with 15.200.1062.1004 drivers

logs https://yadi.sk/d/_riYs8P_rCDDi

what additional info need to debug?

new info

after removing  -cclock  -mclock miner not crash



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 23, 2016, 04:00:59 AM
Claymore,

I noticed that while mining on ethpool.org, the hashrates stats are displaying ok, but the submitted share % doesn't appear in full.

Below my 4 rigs, the first 2 seems displaying ok but the last 2 are not displaying at % shares.

Manual check on these last 2 cards, are submitting shares and at least 1 reject after running 2 straight days

All 4 uses standard syntax as per your start.bat sample.

The default -esm of "eth-proxy mode" was selected upon start up, and I didn't use any -esm as per your start.bat sample.

Please advise.
_
http://i.imgur.com/sL4nMxF.png


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Billyboy4022 on April 23, 2016, 04:30:07 AM
Is there any working Command line for other Ether clone    Hashimoto ( shift coin , Expance , SoilCoin )


this doesnt work for me
Quote
-epool stratum+tcp://shift.suprnova.cc:3000 -ewal billyboy4022.1 -epsw x



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: icelove on April 23, 2016, 05:31:20 AM
Claymore,

the pc bluescreen when close the miner v3.2. is this a bug?
 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dominuspro on April 23, 2016, 05:48:52 AM
Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.

Which pool are you at and is that 70mh/s the calculated hashrate at the pool?  According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows.  For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.

I have had my miners down to update the software.

Reported Hashrate: 70.4 MH/s
Note: This is the hashrate as reported by your miner to the pool.
Effective Current Hashrate: 72.2 MH/s
Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal.
Effective Average Hashrate (last 24h): 68.1 MH/s
Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window.

Thanks.  So you and dominuspro are both at ethermine.  I wish these pools would show rejects....maybe that's what is going on with dominuspro.

Ethermine shows rejects and there were no rejects for me since using dualminer. As I said my poolside 24h avg was allways over 75Mh but the payments didn't match it.
I just went to ethermine because the first version of the miner didn't support coinotron... Now I switched back. I will see in a few days if there is any difference.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: minerkin on April 23, 2016, 06:00:46 AM
Can someone advise why my 280x only gets 300+ MH per card? It used to do 1.3k MH per card.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: restless on April 23, 2016, 06:45:13 AM
Is there any working Command line for other Ether clone    Hashimoto ( shift coin , Expance , SoilCoin )


this doesnt work for me
Quote
-epool stratum+tcp://shift.suprnova.cc:3000 -ewal billyboy4022.1 -epsw x

This works for expanse:

EthDcrMiner64.exe -epool exp-eu.dwarfpool.com:8018 -ewal 0xXXX -epsw X -eworker X -mode 1 -allcoins -1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 23, 2016, 06:52:29 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.

The 290 is throttling due to temp, is the card in a case or open air rig?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: restless on April 23, 2016, 06:55:25 AM
94c is NOT a normal temp!
Anything above 80 is risky in long term - you're reducing chips life

Add 120mm vent blowing to the card and/or open your case


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: alevlaslo on April 23, 2016, 06:59:31 AM
Hi

Neoscrypt good profit today, new miner ETH+FTC is good idea!


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: arielbit on April 23, 2016, 07:01:18 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.

The 290 is throttling due to temp, is the card in a case or open air rig?

i guess your r9 290 is a reference design, they have a switch that throttles fan speed and increase the fan speed in catalyst.

prepare your ears though  ;D that thing is louder than 10 280x combined LOL


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 23, 2016, 07:29:08 AM
Is anyone here using any of the old Stilt's modified bios for the 7950s or the 280Xs?

Is it worth it?

If the answer is yes, will the mods work only for ETH or for other algos as well (for instance X11)?

Thx  ;D

The ROMS I'm using on my 7950s were originally modified by Stilt. He only amended the 1251MHz~1375MHz and 1376MHz~1500MHz strap I think. But it definitely helped my scrypt mining performance. I copied the memory timings from 1376~1500 to 1501~1625 and 1626~1750 because it allows me to overclock over 1500 on the RAM without losing performance.

For my 7970 I couldn't find his version of the ROM anywhere, so I did it myself. The stock ROM was painfully slow for mining, it was actually slower than my 7950s! After tweaking it I got another 2mh/s. So yes, it is definitely worth it.

The timings were originally for scrypt performance, but it will also help any other memory bandwidth/memory latency bound algo.

Mileage can vary. As someone said above, it made no difference for them. I think it helps the cards the most that weren't setup well by the manufacturer. Some get it right! Stilt timing tweaks made no difference on my two 290x.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 23, 2016, 07:37:23 AM
Currently I'm only mining Eth and want to test the dual mining feature.

What DCR pools exist where I don't need to signup?

Thanks


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 07:54:13 AM
Ok I finally got the dual mining running but I am having rejects from DCR.

4GB XFX DD Black Edition 380x
3GB Sapphire Vapor-X 280x

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner1 -esm 2 -epsw <password> -dpool http://dcr.suprnova.cc:9112 -dwal molitar.miner1 -dpsw <password> -allpools 1


Quote
ETH: 04/23/16-03:49:24 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.175 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 21.063 Mh/s, GPU1 19.112 Mh/s
 DCR - Total Speed: 602.621 Mh/s, Total Shares: 2, Rejected: 1
 DCR: GPU0 315.943 Mh/s, GPU1 286.678 Mh/s
 DCR: 04/23/16-03:49:33 - SHARE FOUND - (GPU 0)
 DCR: Share accepted!
ETH: 04/23/16-03:49:37 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.674 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 21.063 Mh/s, GPU1 20.611 Mh/s
 DCR - Total Speed: 625.113 Mh/s, Total Shares: 3, Rejected: 1
 DCR: GPU0 315.948 Mh/s, GPU1 309.165 Mh/s
 DCR: 04/23/16-03:49:51 - SHARE FOUND - (GPU 0)
 DCR: Share accepted!
 DCR: 04/23/16-03:49:57 - SHARE FOUND - (GPU 1)
 DCR: Submitted share rejected!
ETH: 04/23/16-03:50:06 - New job (target 0x00000001310a5081) from coinotron.com:3344


I am also having this error at start.
Quote
ETH: Stratum - Connected
 DCR: Connected
Need to check DAG file (epoch #46), starting...
ETH: Authorized
Cannot parse JSON!
DAG file (epoch #46) is ok.
Need to check next DAG file (epoch #47) in background, starting...
Applying DAG epoch #46 for GPU #0
Create GPU buffer for GPU #0
Applying DAG epoch #46 for GPU #0 done
Applying DAG epoch #46 for GPU #1
Create GPU buffer for GPU #1
Applying DAG epoch #46 for GPU #1 done
DAG file (epoch #47) is ok.

And this other error here...
Quote
ETH: 04/23/16-03:52:36 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.128 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:04
ETH: GPU0 21.059 Mh/s, GPU1 20.069 Mh/s
 DCR - Total Speed: 616.917 Mh/s, Total Shares: 14, Rejected: 4
 DCR: GPU0 315.890 Mh/s, GPU1 301.027 Mh/s
Pool returned error #56.
 DCR: Failed to check work on pool, retry in 20 sec...

How can I resolve this issue?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marvell1 on April 23, 2016, 08:23:44 AM
so whats the best pool so far for DCR ? i dont think i can handle the heat but i would like to test these modded nanos on DCR see if the heat is bareable


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 23, 2016, 08:40:55 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.

The 290 is throttling due to temp, is the card in a case or open air rig?

i guess your r9 290 is a reference design, they have a switch that throttles fan speed and increase the fan speed in catalyst.

prepare your ears though  ;D that thing is louder than 10 280x combined LOL
94c is NOT a normal temp!
Anything above 80 is risky in long term - you're reducing chips life

Add 120mm vent blowing to the card and/or open your case

Its not wise to mine with more than 1 gpu in a case even with side off or case fan, the top gpu will always be hotter due to heat rising from the card below it. If you have absolutely no other option then it is a must to have the side off the case and u can point a desk fan or the likes at the gpu. Also it would be wise to play with undervolting memory/gpu clocks to help reduce those temps as stated above 94c is bad for long term gpu health I would even consider 80c too high I like to keep my gpus 70c or below but 75c should probably be acceptable. Also did you try the -tt flag it will adjust the fanspeed to try maintain target temp ie -tt 75 will adjust the fan speed to try maintain 75c on the gpu.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marvell1 on April 23, 2016, 08:53:39 AM

ok decided to try suprnova for dcr

according to the calculator a r9 nano should do about 1700 mh/s of dcr but im only seeing 440mh/s or so

the funny thing is in dual mining mode my Eth mining has gone up around 5% from eth solo mining lol now im confused.

here are my settings
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal xxxx.113 -esm 2 -epsw x -allpools 1 -dpool http://dcr.suprnova.cc:9112 -dwal xxxx.113 -dpsw x -allpools 1


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 23, 2016, 08:55:41 AM

ok decided to try suprnova for dcr

according to the calculator a r9 nano should do about 1700 mh/s of dcr but im only seeing 440mh/s or so

the funny thing is in dual mining mode my Eth mining has gone up around 5% from eth solo mining lol now im confused.

here are my settings
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal xxxx.113 -esm 2 -epsw x -allpools 1 -dpool http://dcr.suprnova.cc:9112 -dwal xxxx.113 -dpsw x -allpools 1


I also noticed a very slight increase in speed for eth when dual mining compared to just mining eth using r9 280x. 440mh/s sounds reasonable for dual mining my 280x get ~ 285mh/s each when dual mining.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dominuspro on April 23, 2016, 09:02:54 AM

ok decided to try suprnova for dcr

according to the calculator a r9 nano should do about 1700 mh/s of dcr but im only seeing 440mh/s or so

the funny thing is in dual mining mode my Eth mining has gone up around 5% from eth solo mining lol now im confused.

here are my settings
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal xxxx.113 -esm 2 -epsw x -allpools 1 -dpool http://dcr.suprnova.cc:9112 -dwal xxxx.113 -dpsw x -allpools 1


You should increase the dcr intensity, especially for nano. It is easy - just press + or - in the mining window to find Your sweet spot ;)
You can also set the -dcri parameter in the bat file.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marvell1 on April 23, 2016, 09:29:07 AM

ok decided to try suprnova for dcr

according to the calculator a r9 nano should do about 1700 mh/s of dcr but im only seeing 440mh/s or so

the funny thing is in dual mining mode my Eth mining has gone up around 5% from eth solo mining lol now im confused.

here are my settings
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal xxxx.113 -esm 2 -epsw x -allpools 1 -dpool http://dcr.suprnova.cc:9112 -dwal xxxx.113 -dpsw x -allpools 1


You should increase the dcr intensity, especially for nano. It is easy - just press + or - in the mining window to find Your sweet spot ;)
You can also set the -dcri parameter in the bat file.


well unfortunately dual mining comepllye killed my 7 nano box, now its in a crash dump loop windows 10, ill re-install tomrow and try again

i think youre right on the intensity, i could probbaly get close to 900 dcr and still get around 180mhs of eth with this miner assuming the box stays up next time.

I went from 173 mh/s solo mining with eth to 190mh/s and 3000 mh/s dcr 

I would be happy with 170 eth and 7500 or so dcr.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 09:33:18 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.

The 290 is throttling due to temp, is the card in a case or open air rig?

i guess your r9 290 is a reference design, they have a switch that throttles fan speed and increase the fan speed in catalyst.

prepare your ears though  ;D that thing is louder than 10 280x combined LOL
94c is NOT a normal temp!
Anything above 80 is risky in long term - you're reducing chips life

Add 120mm vent blowing to the card and/or open your case

Its not wise to mine with more than 1 gpu in a case even with side off or case fan, the top gpu will always be hotter due to heat rising from the card below it. If you have absolutely no other option then it is a must to have the side off the case and u can point a desk fan or the likes at the gpu. Also it would be wise to play with undervolting memory/gpu clocks to help reduce those temps as stated above 94c is bad for long term gpu health I would even consider 80c too high I like to keep my gpus 70c or below but 75c should probably be acceptable. Also did you try the -tt flag it will adjust the fanspeed to try maintain target temp ie -tt 75 will adjust the fan speed to try maintain 75c on the gpu.

it-s an open air rig. temp control and cc does not work as card will raise above temp secified and under the clock specified also. i am now also experiencing freezes... after a few hours like 5. the computer will freeze i asume this is due to high temp. i will try to raise fan speed to 100%

this is the card https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTgfA-4gkR-AAtI2JqYStf_R9WOBog7R4tQ23zYTTT345TuOLjp8Vw-4Pk


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 23, 2016, 09:33:57 AM
Currently I'm only mining Eth and want to test the dual mining feature.

What DCR pools exist where I don't need to signup?

Thanks

zpool.ca

just provide BTC address


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 23, 2016, 09:37:35 AM
so whats the best pool so far for DCR ? i dont think i can handle the heat but i would like to test these modded nanos on DCR see if the heat is bareable

suprnova has a big DCR pool but I switch to zpool because no registration needed just put BTC address as payout


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Beoga on April 23, 2016, 09:53:48 AM
Is it possible to add option to restart miner after some ethereum shares rejected?
Today I found my miner works, but something wrong occuers with stratum. And all shares that miner found after that was rejected.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 10:03:59 AM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.

The 290 is throttling due to temp, is the card in a case or open air rig?

i guess your r9 290 is a reference design, they have a switch that throttles fan speed and increase the fan speed in catalyst.

prepare your ears though  ;D that thing is louder than 10 280x combined LOL

ok, this helped a lote. temp is now around 86. i think this may fix the freezing issue, which was the worst part. still, should i change the thermal paste? I have never done that before... so I dont want to do it unless I have to or should! would that help? should i change core settings also now that the temp is lower? maybe higher gpu clock and lower memory? can anyone give me a specific value?

thank you for your help so far guys.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: aidia on April 23, 2016, 10:31:29 AM
Running claymore's miner (eth only) for 55 hours straight with 0 eth rejects. Loving this miner. :) 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marcinprv on April 23, 2016, 10:36:04 AM
6x Radeon R9 290X (1150/1350MHz) GPU/MEM
AMD Crimson 15.12 - Windows 10

Claymore 1.2 Beta - 194.8MH/s (Stable)
Claymore 3.2 Beta - 195.6MH/s (Crash after 1 day)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 10:44:59 AM
6x Radeon R9 290X (1150/1350MHz) GPU/MEM
AMD Crimson 15.12 - Windows 10

Claymore 1.2 Beta - 194.8MH/s (Stable)
Claymore 3.2 Beta - 195.6MH/s (Crash after 1 day)

maybe this is why my comp freezes up...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 23, 2016, 10:49:01 AM


it-s an open air rig. temp control and cc does not work as card will raise above temp secified and under the clock specified also. i am now also experiencing freezes... after a few hours like 5. the computer will freeze i asume this is due to high temp. i will try to raise fan speed to 100%

this is the card https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTgfA-4gkR-AAtI2JqYStf_R9WOBog7R4tQ23zYTTT345TuOLjp8Vw-4Pk


Xfx have notoriously bad heat sinks unfortunately :( New thermal paste may help, probably best to try lowering both gpu and mem clocks and then undervolting first if you are unsure about replacing thermal paste. Sorry i don't have any r9 290 to know the best settings perhaps someone else can help with that also there are several methods described in previous pages to get underclocking/undervolting working with current drivers.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 23, 2016, 10:50:38 AM
6x Radeon R9 290X (1150/1350MHz) GPU/MEM
AMD Crimson 15.12 - Windows 10

Claymore 1.2 Beta - 194.8MH/s (Stable)
Claymore 3.2 Beta - 195.6MH/s (Crash after 1 day)

maybe this is why my comp freezes up...

Unlikely, the reason his rig freezes is likely due to excessive oc the latest version utilizes gpu more so previously stable clocks may no longer be stable.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: agente on April 23, 2016, 11:05:26 AM
I use dual ethereum+decred on COINOTRON+Suprnova. I'm testing with 1 R9 290 abount ETH 28mh/s and Decred 700mh/s.
In suprnova panel i read 650mh/s average.. and it's ok but in coinotron i read always 20-22 mh/s.. so far from 28 that i read on my miner.

I'm the only one? It's my problem?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 23, 2016, 11:11:11 AM
Currently I'm only mining Eth and want to test the dual mining feature.

What DCR pools exist where I don't need to signup?

Thanks

zpool.ca

just provide BTC address

Thanks! :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: un4given on April 23, 2016, 11:31:31 AM
Running claymore's miner (eth only) for 55 hours straight with 0 eth rejects. Loving this miner. :) 

i am getting rejects all the time ;(

i did delete DAG 2 times already but i am still getting rejects. any1 an idea why?

using following command

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -esm 1 -ewal 0xCcB701a1F4axxxxxxxxxxxxxxxxxxxxxxxxxxxxx.rig2 -epsw x

also tried us1 adress for stratum, but no changes


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: aistto on April 23, 2016, 12:01:18 PM
@Mr. Claymore

Quote
timeout /t 10
EthDcrMiner64.exe -epool coinotron.com:3344 -epsw pass -ewal serj2.006 -esm 2 -allpools 1 -dir C:\Users\user\Documents\ClaymoreED\dag0 -mode 0 -dpool  stratum+tcp://dcr.coinmine.pl:2222 -dwal salex.006 -dpsw password -dcri 25 -dbg 1 -r 1 -ethi 4
pause
reboot.bat
Quote
shutdown -r

Log  https://yadi.sk/i/8Laaj337rE5eK
screen  https://yadi.sk/i/K_n2QwH4rE5pf

I guess log is ok, this is not miner issue.
But it there any way to handle this error and run some reboot.bat?

edit:
or you can add checking hashrate. eg. last message in log
Quote
11:46:24:457   1360    DCR: GPU0 385.285 Mh/s, GPU1 385.572 Mh/s, GPU2 217.012 Mh/s, GPU3 129166.883 Mh/s, GPU4 385.693 Mh/s, GPU5 237.894 Mh/s
immpossible  129 Gh/s hashrate:)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 23, 2016, 12:24:00 PM
@Mr. Claymore

Quote
timeout /t 10
EthDcrMiner64.exe -epool coinotron.com:3344 -epsw pass -ewal serj2.006 -esm 2 -allpools 1 -dir C:\Users\user\Documents\ClaymoreED\dag0 -mode 0 -dpool  stratum+tcp://dcr.coinmine.pl:2222 -dwal salex.006 -dpsw password -dcri 25 -dbg 1 -r 1 -ethi 4
pause
reboot.bat
Quote
shutdown -r

Log  https://yadi.sk/i/8Laaj337rE5eK
screen  https://yadi.sk/i/K_n2QwH4rE5pf

I guess log is ok, this is not miner issue.
But it there any way to handle this error and run some reboot.bat?

edit:
or you can add checking hashrate. eg. last message in log
Quote
11:46:24:457   1360    DCR: GPU0 385.285 Mh/s, GPU1 385.572 Mh/s, GPU2 217.012 Mh/s, GPU3 129166.883 Mh/s, GPU4 385.693 Mh/s, GPU5 237.894 Mh/s
immpossible  129 Gh/s hashrate:)

Your card ignores OpenCL work somehow and returns immediately without any error, so you get such crazy hashrate. I will fix it in next update, it will show zero hashrate and therefore watchdog will work.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 12:41:14 PM
Running claymore's miner (eth only) for 55 hours straight with 0 eth rejects. Loving this miner. :)  

i am getting rejects all the time ;(

i did delete DAG 2 times already but i am still getting rejects. any1 an idea why?

using following command

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -esm 1 -ewal 0xCcB701a1F4axxxxxxxxxxxxxxxxxxxxxxxxxxxxx.rig2 -epsw x

also tried us1 adress for stratum, but no changes

Use stratum - also tried us1 adress for stratum, but no changes. <- didnt see that part

when i the miner was updated to allow dcr stratum that solved my dcr rejected shares.. :\ maybe try another pool?



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Mrga666 on April 23, 2016, 01:11:52 PM
Need help pls,

I've been mining for 12hours straight perfectly but then I restarted PC and when I ran Miner again he showed my graphics adapters as 2x290 instead of 2x 390 and now openCL hangs...

Help


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 23, 2016, 01:15:13 PM
Just testing dual mining right now, interesting results.

On my 2x290x rig with dual mining my Eth hashrate goes UP compared to solo mining it. Also, increasing DCR intensity doesn't hit Eth performance at all(I tested all the way up to -dcri 70), from a performance point of view dual mining on 290x is "free". The only two downsides are that it does generate more heat and use more electricity. Quite literally the higher the intensity, the more heat. I'm able to fine tune temps by changing intensity :D

On my main rig, 1x7970 and 2x7950 the story is quite different. Mining DCR doesn't come free, the extra heat generated means I can't overclock my cards anywhere near as much. So I'm taking a hit on Eth mining performance due to lower clockspeeds. Couple that with the fact as DCR intensity and hashrate goes up, Eth hashrate definitely goes down. I would have to run it for a few days in both modes and carefully work it out to see which is the most profitable overall. Maybe it is still dual mining, but for now I'll stick to Eth solo only and see what the 290x system brings in. That'll give me a better idea whether it's worth running a dual mode test on my main rig for a few days.

Anyone know a decred mining calculator that works? I've found maybe 3, but none are working.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: arielbit on April 23, 2016, 01:20:54 PM
Hello. I recently got the r9 290 card and it doesnt seem to work to it's full potential. hashrate starts out great like 27 mh/s but it will drop to 21...after it heats up to 94c (which i read is normal for these cards). the miner will show irregular hashrate for this card only. my other r9 280x are all stable hashrates. this one will sometimes hit 23... 25... 21... 20.. should i change termal paste? change clock settings? get a big ass fan and point it at it? i have also had a bsod issue but i solved it by forcing constant voltage. thank you :)

okay, while trying to figure this out i've noticed in gpu-z that, unlike the r9 280x cards, the gpu core clock for the R9 290 is always moving. i noticed that i get a more stable hashrate after mining a bit (it probably adapts) but it's always around 700-800ish core clock. if i set it to the default gpu core clock value (through the miner file) around 940 i believe, or maybe i can even put it a bit higher, I should see a stable and higher hashrate. this is what i'll try tomorrow but i'd love to get an opinion from someone more experinced than me before i do it. all input is welcome. thank you.

The 290 is throttling due to temp, is the card in a case or open air rig?

i guess your r9 290 is a reference design, they have a switch that throttles fan speed and increase the fan speed in catalyst.

prepare your ears though  ;D that thing is louder than 10 280x combined LOL

ok, this helped a lote. temp is now around 86. i think this may fix the freezing issue, which was the worst part. still, should i change the thermal paste? I have never done that before... so I dont want to do it unless I have to or should! would that help? should i change core settings also now that the temp is lower? maybe higher gpu clock and lower memory? can anyone give me a specific value?

thank you for your help so far guys.

never had the experience replacing the thermal paste of my r9 290 reference, i sold it because of the noise..try googling for that.

you might want to try buying a usb riser (3 feet) for that card and put it outside the case.. and lowering clocks will help lowering the temps but it might lose some hashes, anyway you decide and pick the balance, if you run fast and too hot the gpu might die early


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: arielbit on April 23, 2016, 01:24:42 PM
Need help pls,

I've been mining for 12hours straight perfectly but then I restarted PC and when I ran Miner again he showed my graphics adapters as 2x290 instead of 2x 390 and now openCL hangs...

Help

reinstall drivers


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Mrga666 on April 23, 2016, 01:39:48 PM
Need help pls,

I've been mining for 12hours straight perfectly but then I restarted PC and when I ran Miner again he showed my graphics adapters as 2x290 instead of 2x 390 and now openCL hangs...

Help

reinstall drivers

tnx ariel


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: DarkRavenGamer on April 23, 2016, 01:41:51 PM
@Claymore
As soon as you implement solo mining support I will transfer my miningfarm over to your miner.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 23, 2016, 01:48:07 PM
Just testing dual mining right now, interesting results.

On my 2x290x rig with dual mining my Eth hashrate goes UP compared to solo mining it. Also, increasing DCR intensity doesn't hit Eth performance at all(I tested all the way up to -dcri 70), from a performance point of view dual mining on 290x is "free". The only two downsides are that it does generate more heat and use more electricity. Quite literally the higher the intensity, the more heat. I'm able to fine tune temps by changing intensity :D

On my main rig, 1x7970 and 2x7950 the story is quite different. Mining DCR doesn't come free, the extra heat generated means I can't overclock my cards anywhere near as much. So I'm taking a hit on Eth mining performance due to lower clockspeeds. Couple that with the fact as DCR intensity and hashrate goes up, Eth hashrate definitely goes down. I would have to run it for a few days in both modes and carefully work it out to see which is the most profitable overall. Maybe it is still dual mining, but for now I'll stick to Eth solo only and see what the 290x system brings in. That'll give me a better idea whether it's worth running a dual mode test on my main rig for a few days.

Anyone know a decred mining calculator that works? I've found maybe 3, but none are working.

here u go
http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Prelude on April 23, 2016, 01:54:02 PM
@Claymore
As soon as you implement solo mining support I will transfer my miningfarm over to your miner.

Same. Any ETA, Claymore?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 23, 2016, 02:07:29 PM
Just testing dual mining right now, interesting results.

On my 2x290x rig with dual mining my Eth hashrate goes UP compared to solo mining it. Also, increasing DCR intensity doesn't hit Eth performance at all(I tested all the way up to -dcri 70), from a performance point of view dual mining on 290x is "free". The only two downsides are that it does generate more heat and use more electricity. Quite literally the higher the intensity, the more heat. I'm able to fine tune temps by changing intensity :D

On my main rig, 1x7970 and 2x7950 the story is quite different. Mining DCR doesn't come free, the extra heat generated means I can't overclock my cards anywhere near as much. So I'm taking a hit on Eth mining performance due to lower clockspeeds. Couple that with the fact as DCR intensity and hashrate goes up, Eth hashrate definitely goes down. I would have to run it for a few days in both modes and carefully work it out to see which is the most profitable overall. Maybe it is still dual mining, but for now I'll stick to Eth solo only and see what the 290x system brings in. That'll give me a better idea whether it's worth running a dual mode test on my main rig for a few days.

Anyone know a decred mining calculator that works? I've found maybe 3, but none are working.

here u go
http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html

You're awesome! Thanks  8)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 02:07:56 PM
Nobody has answered with my problems with this dual miner.  I am getting horrible rates with Decred.

4GB XFX DD Black Edition 380x
3GB Sapphire Vapor-X 280x

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner1 -esm 2 -epsw <password> -dpool http://dcr.suprnova.cc:9112 -dwal molitar.miner1 -dpsw <password> -allpools 1

I'll add the -tt switch.  But why am I getting all rejects? 

over 4 hours and Decred is...

   Confirmed: 0.0000 DCR
Unconfirmed: 0.0661 DCR

I do not even have a single confirmed after that many hours!



Quote
ETH: 04/23/16-10:01:12 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.709 Mh/s, Total Shares: 206, Rejected: 4, Time: 06:05
ETH: GPU0 21.060 Mh/s, GPU1 20.650 Mh/s
 DCR - Total Speed: 625.638 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.896 Mh/s, GPU1 309.742 Mh/s
ETH: 04/23/16-10:01:21 - SHARE FOUND - (GPU 0)
ETH: Share accepted (156 ms)!
ETH: 04/23/16-10:01:36 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.470 Mh/s, Total Shares: 207, Rejected: 4, Time: 06:05
ETH: GPU0 21.058 Mh/s, GPU1 19.412 Mh/s
 DCR - Total Speed: 607.043 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.864 Mh/s, GPU1 291.179 Mh/s
ETH: 04/23/16-10:02:02 - SHARE FOUND - (GPU 1)
ETH: Share accepted (218 ms)!
ETH: 04/23/16-10:02:15 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.645 Mh/s, Total Shares: 208, Rejected: 4, Time: 06:06
ETH: GPU0 21.047 Mh/s, GPU1 20.598 Mh/s
 DCR - Total Speed: 624.676 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.712 Mh/s, GPU1 308.964 Mh/s
ETH: 04/23/16-10:02:24 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.710 Mh/s, Total Shares: 208, Rejected: 4, Time: 06:06
ETH: GPU0 21.056 Mh/s, GPU1 19.654 Mh/s
 DCR - Total Speed: 610.646 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.842 Mh/s, GPU1 294.804 Mh/s
ETH: 04/23/16-10:02:27 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 39.765 Mh/s, Total Shares: 208, Rejected: 4, Time: 06:06
ETH: GPU0 21.044 Mh/s, GPU1 18.721 Mh/s
 DCR - Total Speed: 596.475 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.659 Mh/s, GPU1 280.816 Mh/s
ETH: 04/23/16-10:02:50 - New job (target 0x00000001310a5081) from coinotron.com:3344



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: DMaster2008 on April 23, 2016, 02:28:52 PM
over 4 hours and Decred is...

   Confirmed: 0.0000 DCR
Unconfirmed: 0.0661 DCR

I do not even have a single confirmed after that many hours!

Decred needs 256 confirmations to mature. The average blockrate is 1 block per 5 min. So you should expect confirmed coins after 256 * 5 min = 21 h 20 min. 4h not enough.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 02:34:54 PM
over 4 hours and Decred is...

   Confirmed: 0.0000 DCR
Unconfirmed: 0.0661 DCR

I do not even have a single confirmed after that many hours!

Decred needs 256 confirmations to mature. The average blockrate is 1 block per 5 min. So you should expect confirmed coins after 256 * 5 min = 21 h 20 min. 4h not enough.

Thanks for that information but also how about the high number of rejects?

Also I am getting this error many times.

Pool returned error #56.
 DCR: Failed to connect to pool, retry in 20 sec...

BTW -tt 100% does not work at all I tried it and watched my manual set fans in the Radeon settings drop down to 25% fan speed.  It lowered instead of raising fan speed.  I had  to remove the -tt completely from the line and just use the AMD setting.

Last question is my hash rates good for this mining?

ETH: 04/23/16-10:37:55 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.149 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:06
ETH: GPU0 21.065 Mh/s, GPU1 20.084 Mh/s
 DCR - Total Speed: 617.230 Mh/s, Total Shares: 6, Rejected: 2
 DCR: GPU0 315.969 Mh/s, GPU1 301.261 Mh/s
 DCR: 04/23/16-10:38:47 - SHARE FOUND - (GPU 1)
 DCR: Share accepted!
 DCR: 04/23/16-10:38:59 - SHARE FOUND - (GPU 1)
 DCR: Share accepted!

actually seem to be doing a bit better since I dropped in AMD settings the power level -20% on the R9 380x and same for the 280x.  Is it possible to drop power requirements more on the 280x ok?  That one card has option down to -50%. 


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: dominuspro on April 23, 2016, 02:36:21 PM
Nobody has answered with my problems with this dual miner.  I am getting horrible rates with Decred.

4GB XFX DD Black Edition 380x
3GB Sapphire Vapor-X 280x

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner1 -esm 2 -epsw <password> -dpool http://dcr.suprnova.cc:9112 -dwal molitar.miner1 -dpsw <password> -allpools 1

I'll add the -tt switch.  But why am I getting all rejects? 

over 4 hours and Decred is...

   Confirmed: 0.0000 DCR
Unconfirmed: 0.0661 DCR

I do not even have a single confirmed after that many hours!



Quote
ETH: 04/23/16-10:01:12 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.709 Mh/s, Total Shares: 206, Rejected: 4, Time: 06:05
ETH: GPU0 21.060 Mh/s, GPU1 20.650 Mh/s
 DCR - Total Speed: 625.638 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.896 Mh/s, GPU1 309.742 Mh/s
ETH: 04/23/16-10:01:21 - SHARE FOUND - (GPU 0)
ETH: Share accepted (156 ms)!
ETH: 04/23/16-10:01:36 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.470 Mh/s, Total Shares: 207, Rejected: 4, Time: 06:05
ETH: GPU0 21.058 Mh/s, GPU1 19.412 Mh/s
 DCR - Total Speed: 607.043 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.864 Mh/s, GPU1 291.179 Mh/s
ETH: 04/23/16-10:02:02 - SHARE FOUND - (GPU 1)
ETH: Share accepted (218 ms)!
ETH: 04/23/16-10:02:15 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.645 Mh/s, Total Shares: 208, Rejected: 4, Time: 06:06
ETH: GPU0 21.047 Mh/s, GPU1 20.598 Mh/s
 DCR - Total Speed: 624.676 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.712 Mh/s, GPU1 308.964 Mh/s
ETH: 04/23/16-10:02:24 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.710 Mh/s, Total Shares: 208, Rejected: 4, Time: 06:06
ETH: GPU0 21.056 Mh/s, GPU1 19.654 Mh/s
 DCR - Total Speed: 610.646 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.842 Mh/s, GPU1 294.804 Mh/s
ETH: 04/23/16-10:02:27 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 39.765 Mh/s, Total Shares: 208, Rejected: 4, Time: 06:06
ETH: GPU0 21.044 Mh/s, GPU1 18.721 Mh/s
 DCR - Total Speed: 596.475 Mh/s, Total Shares: 395, Rejected: 109
 DCR: GPU0 315.659 Mh/s, GPU1 280.816 Mh/s
ETH: 04/23/16-10:02:50 - New job (target 0x00000001310a5081) from coinotron.com:3344



Use stratum also for decred.
Replace -dpool http://dcr.suprnova.cc:9112 with -dpool stratum+tcp://dcr.suprnova.cc:2252

The rejects will drop to 1-3% ;)
And You have to wait for almost 24h for DCR confirmation.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Trimegistus on April 23, 2016, 02:51:30 PM

Use stratum also for decred.
Replace -dpool http://dcr.suprnova.cc:9112 with -dpool stratum+tcp://dcr.suprnova.cc:2252

The rejects will drop to 1-3% ;)
And You have to wait for almost 24h for DCR confirmation.

For me, the use of suprnova stratum for DCR, combined with -dcri 20 resulted in a rejection rate lower than 1%  ;D


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 23, 2016, 03:02:54 PM
Currently I'm only mining Eth and want to test the dual mining feature.

What DCR pools exist where I don't need to signup?

Thanks

zpool.ca

just provide BTC address

Thanks! :)

password for DCR in zpool.ca will be "-psw c=BTC,decred"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: ilia7777 on April 23, 2016, 03:18:55 PM
I used to mine with Ethos, now claymore seems to be available only on windows. Does anybody have any idea on how much RAM I need per card ? Most of my rigs are with 390s. The good thing about Ethos was that it was running fine with only 4Gb of RAM for a 6 card rig and not even consuming all 4.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Trimegistus on April 23, 2016, 03:32:02 PM
I used to mine with Ethos, now claymore seems to be available only on windows. Does anybody have any idea on how much RAM I need per card ? Most of my rigs are with 390s. The good thing about Ethos was that it was running fine with only 4Gb of RAM for a 6 card rig and not even consuming all 4.

To mine ETH you need a minimum 2 Gb RAM per card, otherwise the DAG won't load into the cards's memory


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 03:36:29 PM

Use stratum also for decred.
Replace -dpool http://dcr.suprnova.cc:9112 with -dpool stratum+tcp://dcr.suprnova.cc:2252

The rejects will drop to 1-3% ;)
And You have to wait for almost 24h for DCR confirmation.

Thanks that made a difference btw can this Cannot parse JSON! be ignored?

Quote
ETH: Stratum - Connected
 DCR: Stratum - Connected
Need to check DAG file (epoch #46), starting...
ETH: Authorized
Cannot parse JSON!
 DCR: Authorized
DAG file (epoch #46) is ok.
Need to check next DAG file (epoch #47) in back
Applying DAG epoch #46 for GPU #0
Create GPU buffer for GPU #0
Applying DAG epoch #46 for GPU #0 done
Applying DAG epoch #46 for GPU #1
Create GPU buffer for GPU #1
Applying DAG epoch #46 for GPU #1 done
DAG file (epoch #47) is ok.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: cryptoc19 on April 23, 2016, 03:38:49 PM
Currently I'm only mining Eth and want to test the dual mining feature.

What DCR pools exist where I don't need to signup?

Thanks

zpool.ca

just provide BTC address

Thanks! :)

password for DCR in zpool.ca will be "-psw c=BTC,decred"

what's you reject rate for DCR on this pool?
and, could you please post your full command when you use this pool? I've been toying around with it, but can't seem to get it working..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: un4given on April 23, 2016, 03:42:00 PM
Running claymore's miner (eth only) for 55 hours straight with 0 eth rejects. Loving this miner. :)  

i am getting rejects all the time ;(

i did delete DAG 2 times already but i am still getting rejects. any1 an idea why?

using following command

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -esm 1 -ewal 0xCcB701a1F4axxxxxxxxxxxxxxxxxxxxxxxxxxxxx.rig2 -epsw x

also tried us1 adress for stratum, but no changes

Use stratum - also tried us1 adress for stratum, but no changes. <- didnt see that part

when i the miner was updated to allow dcr stratum that solved my dcr rejected shares.. :\ maybe try another pool?


Yeah  i need try to use smile pools without stratum. But stratum should work too. Using the last version of claymore


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: citronick on April 23, 2016, 03:48:14 PM
Currently I'm only mining Eth and want to test the dual mining feature.

What DCR pools exist where I don't need to signup?

Thanks

zpool.ca

just provide BTC address

Thanks! :)

password for DCR in zpool.ca will be "-psw c=BTC,decred"

what's you reject rate for DCR on this pool?
and, could you please post your full command when you use this pool? I've been toying around with it, but can't seem to get it working..

DCR rejects 1-2% at this pool.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool asia1.ethpool.org:3333 -ewal <<ETH Address.workername>> -epsw x -dpool stratum+tcp://mine.zpool.ca:5744 -dwal <<BTC Address>> -dpsw c=BTC,decred


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: cryptoc19 on April 23, 2016, 03:57:56 PM

DCR rejects 1-2% at this pool.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool asia1.ethpool.org:3333 -ewal <<ETH Address.workername>> -epsw x -dpool stratum+tcp://mine.zpool.ca:5744 -dwal <<BTC Address>> -dpsw c=BTC,decred

Thanks!  :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 04:03:23 PM
I used to mine with Ethos, now claymore seems to be available only on windows. Does anybody have any idea on how much RAM I need per card ? Most of my rigs are with 390s. The good thing about Ethos was that it was running fine with only 4Gb of RAM for a 6 card rig and not even consuming all 4.

To mine ETH you need a minimum 2 Gb RAM per card, otherwise the DAG won't load into the cards's memory

so, my fifth card wont work with 8gb of ram?! sh >:( >:(, i did not know that...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: restless on April 23, 2016, 04:24:49 PM
Of course not, just make your virtual memory 8 to 16GB min and it will work.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: klondike_bar on April 23, 2016, 04:46:19 PM
I used to mine with Ethos, now claymore seems to be available only on windows. Does anybody have any idea on how much RAM I need per card ? Most of my rigs are with 390s. The good thing about Ethos was that it was running fine with only 4Gb of RAM for a 6 card rig and not even consuming all 4.

To mine ETH you need a minimum 2 Gb RAM per card, otherwise the DAG won't load into the cards's memory

so, my fifth card wont work with 8gb of ram?! sh >:( >:(, i did not know that...

unless this software is different, thats false.

etereum needs as much system ram as it needs GPU ram, because the DAG is loaded on both. But it only needs one copy in the ram for every running instance (and the DAG is only ~1.4GB, so even 5 seperate ethminer instances would be ~7.1GB of RAM usage)

if you have all your cards running in te same instance of ethminer your RAM usage will only be 1.4Gb (size of the DAG)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 23, 2016, 04:51:50 PM
okay, thought i had something else to worry about. i have always heard ram didnt matter much but since this miner is diff from most, that post got me wondering. thx :)

(still having freezes with my r9 290, i think that setting a FIXED value for gpu clock (factory) will fix it, can anyone give an opinion on this? I have fixed BSOD forcing constant voltage and got the temp down to 86-87 with 100% fan. which i may reduce to 70% depending on the temp.. I am running a test with the other 3 cards r9 280x to see if it may be something else)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: arielbit on April 23, 2016, 05:10:18 PM
I used to mine with Ethos, now claymore seems to be available only on windows. Does anybody have any idea on how much RAM I need per card ? Most of my rigs are with 390s. The good thing about Ethos was that it was running fine with only 4Gb of RAM for a 6 card rig and not even consuming all 4.

To mine ETH you need a minimum 2 Gb RAM per card, otherwise the DAG won't load into the cards's memory

so, my fifth card wont work with 8gb of ram?! sh >:( >:(, i did not know that...

unless this software is different, thats false.

etereum needs as much system ram as it needs GPU ram, because the DAG is loaded on both. But it only needs one copy in the ram for every running instance (and the DAG is only ~1.4GB, so even 5 seperate ethminer instances would be ~7.1GB of RAM usage)

if you have all your cards running in te same instance of ethminer your RAM usage will only be 1.4Gb (size of the DAG)

on windows 7 64bit you need system ram of 4gb, my rig with 2gb and 3gb can't mine until i upgraded it to 4gb..using ethminer

haven't tried system ram downgrade with this dual miner yet..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: knobson on April 23, 2016, 06:04:48 PM
!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

 DCR - Total Speed: 205.617 Mh/s, Total Shares: 5451, Rejected: 2075
 DCR: GPU0 205.617 Mh/s
 DCR: Submitted share rejected!
 DCR: 04/23/16-21:03:38 - SHARE FOUND - (GPU 0)
 DCR: Submitted share rejected!
 DCR: 04/23/16-21:03:39 - SHARE FOUND - (GPU 0)
 DCR: Submitted share rejected!
Pool returned error #56.
 DCR: Failed to check work on pool, retry in 20 sec...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 06:16:52 PM
Quote
ETH: 04/23/16-14:12:04 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.911 Mh/s, Total Shares: 109, Rejected: 0, Time: 02:37
ETH: GPU0 21.052 Mh/s, GPU1 19.859 Mh/s
 DCR - Total Speed: 613.668 Mh/s, Total Shares: 1334, Rejected: 11
 DCR: GPU0 315.781 Mh/s, GPU1 297.887 Mh/s
 DCR: 04/23/16-14:12:11 - New job (target 0x00000000ffff0000, block #21943) from dcr.suprnova.cc:2252
ETH: 04/23/16-14:12:18 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.391 Mh/s, Total Shares: 109, Rejected: 0, Time: 02:38
ETH: GPU0 21.066 Mh/s, GPU1 20.325 Mh/s
 DCR - Total Speed: 620.868 Mh/s, Total Shares: 1334, Rejected: 11
 DCR: GPU0 315.996 Mh/s, GPU1 304.872 Mh/s
 DCR: 04/23/16-14:12:19 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (109 ms)!

Seemed to be doing pretty good now.. BTW I get this intermittently.

Quote
ETH: 04/23/16-14:14:24 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.910 Mh/s, Total Shares: 110, Rejected: 0, Time: 02:40
ETH: GPU0 21.062 Mh/s, GPU1 19.848 Mh/s
 DCR - Total Speed: 613.646 Mh/s, Total Shares: 1343, Rejected: 11
 DCR: GPU0 315.924 Mh/s, GPU1 297.722 Mh/s
 DCR: 04/23/16-14:14:25 - SHARE FOUND - (GPU 0)
 DCR: 04/23/16-14:14:36 - SHARE FOUND - (GPU 1)
 DCR: Stratum - socket send failed 10053, disconnect
 DCR: 04/23/16-14:14:40 - SHARE FOUND - (GPU 1)
 DCR: Stratum - socket send failed 10038, disconnect
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 2252
 DCR: Stratum - Connected
 DCR: Authorized

right after this disconnect is when I will get 2 or 3 rejects at least..  How can I resolve this disconnect issue?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: McNulty on April 23, 2016, 06:44:56 PM
Quote
ETH: 04/23/16-14:12:04 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.911 Mh/s, Total Shares: 109, Rejected: 0, Time: 02:37
ETH: GPU0 21.052 Mh/s, GPU1 19.859 Mh/s
 DCR - Total Speed: 613.668 Mh/s, Total Shares: 1334, Rejected: 11
 DCR: GPU0 315.781 Mh/s, GPU1 297.887 Mh/s
 DCR: 04/23/16-14:12:11 - New job (target 0x00000000ffff0000, block #21943) from dcr.suprnova.cc:2252
ETH: 04/23/16-14:12:18 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.391 Mh/s, Total Shares: 109, Rejected: 0, Time: 02:38
ETH: GPU0 21.066 Mh/s, GPU1 20.325 Mh/s
 DCR - Total Speed: 620.868 Mh/s, Total Shares: 1334, Rejected: 11
 DCR: GPU0 315.996 Mh/s, GPU1 304.872 Mh/s
 DCR: 04/23/16-14:12:19 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (109 ms)!

Seemed to be doing pretty good now.. BTW I get this intermittently.

Quote
ETH: 04/23/16-14:14:24 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 40.910 Mh/s, Total Shares: 110, Rejected: 0, Time: 02:40
ETH: GPU0 21.062 Mh/s, GPU1 19.848 Mh/s
 DCR - Total Speed: 613.646 Mh/s, Total Shares: 1343, Rejected: 11
 DCR: GPU0 315.924 Mh/s, GPU1 297.722 Mh/s
 DCR: 04/23/16-14:14:25 - SHARE FOUND - (GPU 0)
 DCR: 04/23/16-14:14:36 - SHARE FOUND - (GPU 1)
 DCR: Stratum - socket send failed 10053, disconnect
 DCR: 04/23/16-14:14:40 - SHARE FOUND - (GPU 1)
 DCR: Stratum - socket send failed 10038, disconnect
 DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 2252
 DCR: Stratum - Connected
 DCR: Authorized

right after this disconnect is when I will get 2 or 3 rejects at least..  How can I resolve this disconnect issue?

do you have an Asus Router ? if yes, try without "AiProtection"


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 23, 2016, 07:09:57 PM
No it's Actiontech as I have FIOS now Frontier 80/80MB connection.  Ok I found I needed to lower my intensity on my main gpu for my system.

-ethi 16,4

My 4GB 380x is my primary card and my 3GB 280x is my secondary but ethminer sees it the opposite direction. So lowering intensity to 4 reduced lag in my Windows and that lowered disconnects down quite a bit.  But still having a few just not as many now.  It hasn't effected the performance much either.

Quote
ETH: 04/23/16-15:04:43 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 37.289 Mh/s, Total Shares: 26, Rejected: 0, Time: 00:39
ETH: GPU0 21.067 Mh/s, GPU1 16.222 Mh/s
 DCR - Total Speed: 559.327 Mh/s, Total Shares: 292, Rejected: 0
 DCR: GPU0 316.004 Mh/s, GPU1 243.323 Mh/s
 DCR: 04/23/16-15:04:46 - SHARE FOUND - (GPU 0)
 DCR: 04/23/16-15:04:46 - SHARE FOUND - (GPU 0)
 DCR: 04/23/16-15:04:46 - SHARE FOUND - (GPU 1)
 DCR: 04/23/16-15:04:48 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (1966 ms)!
 DCR: Share accepted (1966 ms)!
 DCR: Share accepted (1966 ms)!
 DCR: Share accepted (1966 ms)!
 DCR: 04/23/16-15:04:51 - SHARE FOUND - (GPU 1)
 DCR: Share accepted (514 ms)!
 DCR: 04/23/16-15:05:01 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (125 ms)!
ETH: 04/23/16-15:05:10 - New job (target 0x00000001310a5081) from coinotron.com:3344

Now to the other I have this PC as a DMZ host with mininum security.  I rely on PC firewall for any real threats.  The only other thing I have is inbound packets scanning ports are dropped on the main ports that are scanned.

RPC - TCP Any -> 135   
Net_BIOS - TCP Any -> 139   
HTTPS - TCP Any -> 443   
MSFT_DS - TCP Any -> 445   
SSH - TCP Any -> 22   

and block ip fragments. So that should not affect anything. Response time on many test sites are 51-52 ms for latency.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: IncludeBeer on April 23, 2016, 07:51:24 PM

Use stratum also for decred.
Replace -dpool http://dcr.suprnova.cc:9112 with -dpool stratum+tcp://dcr.suprnova.cc:2252

The rejects will drop to 1-3% ;)
And You have to wait for almost 24h for DCR confirmation.

Thanks that made a difference btw can this Cannot parse JSON! be ignored?

Quote
ETH: Stratum - Connected
 DCR: Stratum - Connected
Need to check DAG file (epoch #46), starting...
ETH: Authorized
Cannot parse JSON!
 DCR: Authorized
DAG file (epoch #46) is ok.
Need to check next DAG file (epoch #47) in back
Applying DAG epoch #46 for GPU #0
Create GPU buffer for GPU #0
Applying DAG epoch #46 for GPU #0 done
Applying DAG epoch #46 for GPU #1
Create GPU buffer for GPU #1
Applying DAG epoch #46 for GPU #1 done
DAG file (epoch #47) is ok.

Ya, I see the same after switvhing to supernova stratum.  It caused the miner to constantly restart (with watchdog), so I've deleted my DAG files and having the miner regenerate them.  Not really sure if that will help or not...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marvell1 on April 23, 2016, 08:27:20 PM
So i tried moving some other machines over to dual mining and having alot of problems with the 3.2 version

several machines will just reboot them selves while mining the dual alogos, no error message nothing.  I wiped one machine with 6 290x cards back to stock windows 10 default drivers 15.300  ( always gets installed no matter what i do, even if i turn off network and mnually install 15.12 crimson when i check the device i see 15.300 /shurg  one machine with that same driver works fine in dual mode)


tried default intensity 30 and higer same deal machines just randomly die after about 10 mins

any ideas ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 23, 2016, 08:40:17 PM
So i tried moving some other machines over to dual mining and having alot of problems with the 3.2 version

several machines will just reboot them selves while mining the dual alogos, no error message nothing.  I wiped one machine with 6 290x cards back to stock windows 10 default drivers 15.300  ( always gets installed no matter what i do, even if i turn off network and mnually install 15.12 crimson when i check the device i see 15.300 /shurg  one machine with that same driver works fine in dual mode)


tried default intensity 30 and higer same deal machines just randomly die after about 10 mins

any ideas ?

Maybe just try upgrading to a newer driver.

I'm using 16.3.1 on one PC and 16.3.2 on another and not had a single issue.

Could also be your cards are getting too hot or not enough power from your PSU.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 23, 2016, 10:12:58 PM
So i tried moving some other machines over to dual mining and having alot of problems with the 3.2 version

several machines will just reboot them selves while mining the dual alogos, no error message nothing.  I wiped one machine with 6 290x cards back to stock windows 10 default drivers 15.300  ( always gets installed no matter what i do, even if i turn off network and mnually install 15.12 crimson when i check the device i see 15.300 /shurg  one machine with that same driver works fine in dual mode)


tried default intensity 30 and higer same deal machines just randomly die after about 10 mins

any ideas ?

Don't use win 10... problem solved :P


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: phzi on April 23, 2016, 11:35:01 PM
So i tried moving some other machines over to dual mining and having alot of problems with the 3.2 version

several machines will just reboot them selves while mining the dual alogos, no error message nothing.  I wiped one machine with 6 290x cards back to stock windows 10 default drivers 15.300  ( always gets installed no matter what i do, even if i turn off network and mnually install 15.12 crimson when i check the device i see 15.300 /shurg  one machine with that same driver works fine in dual mode)


tried default intensity 30 and higer same deal machines just randomly die after about 10 mins

any ideas ?

Don't use win 10... problem solved :P
Windows 10 works perfectly fine. Marvell1's problem sounds like power, excessive overclock, or similar.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Titan-Allen on April 23, 2016, 11:40:12 PM
I was able to use the latest version of Crimson 16.3 with this mining program. By doing so, I was able to go into Catalyst and manually change the fan speed. I could not do that in this mining program, as it kept crashing the program. Also, the program does not like it when you adjust mclock through it, although I can do that  "normally" in Catalyst without crashing my cards. Leaving it at the factory settings still resulted in the card producing the optimum MH/s when mining Ethereum. That was a plus, since overclocking creates all kinds of problem, as a general rule. The rejection rates are almost zero in this mining program, which is unbelievable. I brought the DCR intensity up to 50. It affected the Eth hashrate little. DCR hashrate, at this setting, is cooking away at 672 MH/s without damaging the Eth hashrate much. I will attempt to ramp up the intensity further once I have everything else set properly. Here is what I have for R9 290. Others seem to have differing success rates:


"EthDcrMiner64.exe -epool coinotron.com:3344 -ewal XXXXXXX.XXXXXXX -esm 2 -epsw XXXX -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal XXXXXXX.XXXXXXX -dpsw XXXX -allpools 1 -ethi 13 -dcri 50 -dcrt 5"

I changed -dcrt to 5, because the miner popped up failures due to get-work not happening fast enough, for some reason. Part of this may have been from using the non stratum access to suprnova, which I never knew existed. It may not be a problem now, but I left it in regardless.

This program is something else, I must say. I am curious as to whether there are other coin combinations out there which could benefit from this program, tweaked to the pairs and algos. Considering I have 3 Eth rigs here, this will boost daily revenues by around $8-$10, as long as DCR does not fall even more than it has recently.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Eliovp on April 23, 2016, 11:40:36 PM
So i tried moving some other machines over to dual mining and having alot of problems with the 3.2 version

several machines will just reboot them selves while mining the dual alogos, no error message nothing.  I wiped one machine with 6 290x cards back to stock windows 10 default drivers 15.300  ( always gets installed no matter what i do, even if i turn off network and mnually install 15.12 crimson when i check the device i see 15.300 /shurg  one machine with that same driver works fine in dual mode)


tried default intensity 30 and higer same deal machines just randomly die after about 10 mins

any ideas ?

Don't use win 10... problem solved :P

Great answer......  :-\

Win 10 is rock solid over here, fastest os regarding mining i ever used. No shit with installing gpu drivers when having more than 5 GPU's. It just works.

Try 3.0 Marvell1,

Works perfectly over here, had some small issues with 3.2 as well.

Also add -ethi 4 to your bash, could solve your problems too..


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: markoz on April 24, 2016, 12:07:36 AM
what was the command for choosing which cards to use for minig, for example if i have 4 cards and want to mine with only 3?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Trimegistus on April 24, 2016, 12:09:35 AM

Win 10 is rock solid over here, fastest os regarding mining i ever used. No shit with installing gpu drivers when having more than 5 GPU's. It just works.


Have you ever tried installing more than 4 video cards under Win 7? I had a 6 card rig working fine on Win 10 but reversed it to Win 7 in hope of getting better speeds but problems immediately arose when some cards refused to work.

Does Win 7 has any limitation to the number of video cards simultaneously installed?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Eliovp on April 24, 2016, 12:29:43 AM

Win 10 is rock solid over here, fastest os regarding mining i ever used. No shit with installing gpu drivers when having more than 5 GPU's. It just works.


Have you ever tried installing more than 4 video cards under Win 7? I had a 6 card rig working fine on Win 10 but reversed it to Win 7 in hope of getting better speeds but problems immediately arose when some cards refused to work.

Does Win 7 has any limitation to the number of video cards simultaneously installed?

Yup, 7 gives issue with 5+ cards. There's a 6gpu mod flowing around, that works but it's not going to give you a speed increase. Well it didn't over here...


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Pustul on April 24, 2016, 01:07:07 AM
Is anyone here using any of the old Stilt's modified bios for the 7950s or the 280Xs?

Is it worth it?

If the answer is yes, will the mods work only for ETH or for other algos as well (for instance X11)?

Thx  ;D

The ROMS I'm using on my 7950s were originally modified by Stilt. He only amended the 1251MHz~1375MHz and 1376MHz~1500MHz strap I think. But it definitely helped my scrypt mining performance. I copied the memory timings from 1376~1500 to 1501~1625 and 1626~1750 because it allows me to overclock over 1500 on the RAM without losing performance.

For my 7970 I couldn't find his version of the ROM anywhere, so I did it myself. The stock ROM was painfully slow for mining, it was actually slower than my 7950s! After tweaking it I got another 2mh/s. So yes, it is definitely worth it.

The timings were originally for scrypt performance, but it will also help any other memory bandwidth/memory latency bound algo.

Mileage can vary. As someone said above, it made no difference for them. I think it helps the cards the most that weren't setup well by the manufacturer. Some get it right! Stilt timing tweaks made no difference on my two 290x.

Do you mind sharing the bios for the 7970  :D?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Marvell1 on April 24, 2016, 01:12:28 AM
So i tried moving some other machines over to dual mining and having alot of problems with the 3.2 version

several machines will just reboot them selves while mining the dual alogos, no error message nothing.  I wiped one machine with 6 290x cards back to stock windows 10 default drivers 15.300  ( always gets installed no matter what i do, even if i turn off network and mnually install 15.12 crimson when i check the device i see 15.300 /shurg  one machine with that same driver works fine in dual mode)


tried default intensity 30 and higer same deal machines just randomly die after about 10 mins

any ideas ?

Don't use win 10... problem solved :P

Great answer......  :-\

Win 10 is rock solid over here, fastest os regarding mining i ever used. No shit with installing gpu drivers when having more than 5 GPU's. It just works.

Try 3.0 Marvell1,

Works perfectly over here, had some small issues with 3.2 as well.

Also add -ethi 4 to your bash, could solve your problems too..

thats for the tip i will try -eth 4 first

youre right about win 10 , up to 8 GPUs even and more with no issues unlike 8, and 7

will lowering eth mining intensity lower my hash rate ?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: molitar on April 24, 2016, 04:19:18 AM
Bit off topic but I am really curious what makes Decred so much more difficult to mine than Ethereum?  Ethereum mining is at 40 MH/s and is just about the exact same amount of .5 coins roughly a day as the Decred which is at just over 600 MH/s.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Walrusbonzo on April 24, 2016, 05:36:53 AM
Is anyone here using any of the old Stilt's modified bios for the 7950s or the 280Xs?

Is it worth it?

If the answer is yes, will the mods work only for ETH or for other algos as well (for instance X11)?

Thx  ;D

The ROMS I'm using on my 7950s were originally modified by Stilt. He only amended the 1251MHz~1375MHz and 1376MHz~1500MHz strap I think. But it definitely helped my scrypt mining performance. I copied the memory timings from 1376~1500 to 1501~1625 and 1626~1750 because it allows me to overclock over 1500 on the RAM without losing performance.

For my 7970 I couldn't find his version of the ROM anywhere, so I did it myself. The stock ROM was painfully slow for mining, it was actually slower than my 7950s! After tweaking it I got another 2mh/s. So yes, it is definitely worth it.

The timings were originally for scrypt performance, but it will also help any other memory bandwidth/memory latency bound algo.

Mileage can vary. As someone said above, it made no difference for them. I think it helps the cards the most that weren't setup well by the manufacturer. Some get it right! Stilt timing tweaks made no difference on my two 290x.

Do you mind sharing the bios for the 7970  :D?

It's for an MSI Lightning. It would actually be better for you to provide me with your BIOS. Or better still, go here https://www.techpowerup.com/vgabios/ and tell me which card EXACTLY is yours. Then I can download that and modify it.

Do you have dual BIOS on your card?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Bananana on April 24, 2016, 07:02:16 AM
1) I downloaded and install 15.12 amd driver but it shows 15.8 version in MSI afterburner, anybody have that problem?
2) Also is there a way to show valid and invalid share (in ethpool.org) using claymore gpu miner v3.2 when mining on ethpool?

Thanks in advance :)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 24, 2016, 07:11:41 AM

Win 10 is rock solid over here, fastest os regarding mining i ever used. No shit with installing gpu drivers when having more than 5 GPU's. It just works.


Have you ever tried installing more than 4 video cards under Win 7? I had a 6 card rig working fine on Win 10 but reversed it to Win 7 in hope of getting better speeds but problems immediately arose when some cards refused to work.

Does Win 7 has any limitation to the number of video cards simultaneously installed?

Yes i use the mod, any more than 4 gpu in win 7 and there are issues which the mod fixes perfectly. https://bitcointalk.org/index.php?topic=712228.0 here is a link to the mod for fixing issue with more than 4 gpu on win7.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: QuintLeo on April 24, 2016, 08:53:26 AM

To mine ETH you need a minimum 2 Gb RAM per card, otherwise the DAG won't load into the cards's memory



 Might be specific for this miner, I was mining Ethereum using QTMiner on a machine that had 1 GIG of ram in the machine (and a 2 Gig GTX960).

 It had to do some special manipulation stuff on the DAG per some of the messages I saw out of it, which meant the first DAG took bloody near forever to get set up, but it then mined successfully for a while (I ended up moving the card to a different machine in a "consolodation" move after a couple days).


 I would RECOMMEND at least 2 GIG main system memory to avoid this issue, though.



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 24, 2016, 09:05:28 AM
Suprnova is down for everyone?? Nvm it seems to be working again.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 24, 2016, 09:51:42 AM
Bit off topic but I am really curious what makes Decred so much more difficult to mine than Ethereum?  Ethereum mining is at 40 MH/s and is just about the exact same amount of .5 coins roughly a day as the Decred which is at just over 600 MH/s.

different algorithms have different hashrate. so 600mh/s may look like "alot" compared to eth hashspeed. but it's not.. it's just like comparing oranges and potatos.. if you try to mine something like monero it will give you way less hashrate :) it depends on the algorithm.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 24, 2016, 10:01:14 AM
btw, this miner just keeps blowing my mind. i put decred intensity to 50% and it made my eth hashrate better lol from 63 to 64 and decred from 900 to 1600.

as for my R9 290 issue. it's still happening. the gpu clock just wont stay where i put it with msi afterburner. it starts out that way but then as the card gets hotter the gpu core clock will go down to 820ish. i think i will try underclocking it to 800mh/s see if it's stable.. any other ideas? thx


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: restless on April 24, 2016, 10:08:27 AM
Improve cooling of the card
Also, make sure your PSU is producing stable 12V (no less than 11.5V)


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 24, 2016, 10:10:54 AM
Improve cooling of the card
Also, make sure your PSU is producing stable 12V (no less than 11.5V)

i think the psu is not the problem because the r9 280x work just fine.. but how do i check/fix this?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: merc84 on April 24, 2016, 10:31:05 AM
btw, this miner just keeps blowing my mind. i put decred intensity to 50% and it made my eth hashrate better lol from 63 to 64 and decred from 900 to 1600.

as for my R9 290 issue. it's still happening. the gpu clock just wont stay where i put it with msi afterburner. it starts out that way but then as the card gets hotter the gpu core clock will go down to 820ish. i think i will try underclocking it to 800mh/s see if it's stable.. any other ideas? thx

It is normal for gpu clock to reduce when temp exceeds threshold defined in the gpu bios its called thermal throttling, if you are having problems with temps then you really shouldn't be overclocking it in the first place.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Donteuqilla on April 24, 2016, 11:22:57 AM
My effictive average Hashrate is on both miners I use way off (about 5-10 MH/s).

Miner1:
Reported 142,1 MH/s; Effective Average Hashrate 136.5 MH/s (which is on the higher side, it can go down to almost 130 MH/s)

Miner2:
Reported 134,3 MH/s; Effective Average Hashrate 125.8 MH/s

Pool: Ethermine;
Miner: Claymore's miner in eth only mode.
Windows 7 with mixed GPUs.

I'am aware of the dev fee, but it shouldn't be more than 1,5 MH/s.
With this miner I have almost no invalid shares, and it restarts if anything happens - which is great. But also more watt consumption and apparently no real average (24h) MH/s gain. (reported hashrate is about 5% higher with this miner).

Anyone else with this problem?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: andreynk on April 24, 2016, 11:56:54 AM
1) I downloaded and install 15.12 amd driver but it shows 15.8 version in MSI afterburner, anybody have that problem?
2) Also is there a way to show valid and invalid share (in ethpool.org) using claymore gpu miner v3.2 when mining on ethpool?

Thanks in advance :)

update your Afterburner.
I had same problem with old version of GPU-Z


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: restless on April 24, 2016, 12:25:55 PM
Improve cooling of the card
Also, make sure your PSU is producing stable 12V (no less than 11.5V)

i think the psu is not the problem because the r9 280x work just fine.. but how do i check/fix this?
Run GPU-Z or HWInfo and see/post what are GPU temps and reported voltages

As earlier you reported seeing 94 Celsuis on 290.. its badly overheating


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: buitanthanh1979 on April 24, 2016, 12:44:24 PM
A little bit of share.
I use the win10 for better hardware support
1. Install new win10. use the update function of the win 10 to update all the hardware. Then restart the computer
2. Install Driver Booster 3, the software driver updates online

Link Down http://www.iobit.com/en/driver-booster.php

Then use 38A24-42DC3-6BF6B-70CB3 Serial Driver update Booster 3 Pro

Scan driver and update all new drivers, then reboot the computer.

I use 1 r9 270x card.

My command line. Work effectively with me.

EthDcrMiner64.exe -epool eth-sg.dwarfpool.com:8008 -ewal YOUR_WALLET/YOUR_WORKER -epsw x -dpool stratum + tcp: //dcr.maxminers.net: 7777 -dwal  Weblogin.WorkerName -dpsw WorkerPassword -esm 0 -dcri 50 -ethi 25 -dcrt 15 -r 180 -allpools 1 -allcoins -1

You should use 2 commands -ethi 25 -dcrt 15 , it make effective ETH


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: revelacaogr on April 24, 2016, 01:10:31 PM
pool.mn lost https since yestarday

anyone else see the same prob?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: leatutz on April 24, 2016, 02:08:01 PM
I was trying to mine more decred the difficulty seems much larger than the ETH , did not understand anything being worth much less


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Beoga on April 24, 2016, 02:15:00 PM
second time miner stoped after trying to restart:

http://i.imgur.com/HJfDv14.png


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 24, 2016, 04:01:36 PM
btw, this miner just keeps blowing my mind. i put decred intensity to 50% and it made my eth hashrate better lol from 63 to 64 and decred from 900 to 1600.

as for my R9 290 issue. it's still happening. the gpu clock just wont stay where i put it with msi afterburner. it starts out that way but then as the card gets hotter the gpu core clock will go down to 820ish. i think i will try underclocking it to 800mh/s see if it's stable.. any other ideas? thx

It is normal for gpu clock to reduce when temp exceeds threshold defined in the gpu bios its called thermal throttling, if you are having problems with temps then you really shouldn't be overclocking it in the first place.

I wasnt overclocking. I was just trying to lock the gpu core in factory values. all the other cards stay there. but this one starts reducing when the card gets hot. so the temp is probably the problem. i think that underclocking may solve the freezing issue..correct? i may try to return this card anyways..

when i said "underclocking it to 800mh/s" I ment to 800mhz xD btw



Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 24, 2016, 04:08:18 PM
Improve cooling of the card
Also, make sure your PSU is producing stable 12V (no less than 11.5V)

i think the psu is not the problem because the r9 280x work just fine.. but how do i check/fix this?
Run GPU-Z or HWInfo and see/post what are GPU temps and reported voltages

As earlier you reported seeing 94 Celsuis on 290.. its badly overheating

i put the fan on 100% and it stays on 86ish degrees. but it's still not stable. i think the gpu is just... not okay.

I will see the reported voltages when i put that card on the rig again to test it.

I'm waiting for more r9 290... maybe it has something to do with the other r9 280x somehow... not sure though. I'm on win7 64 also.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: th00ber on April 24, 2016, 07:33:43 PM
For your information: https://bitcointalk.org/index.php?topic=1448855.0
Some windows status page for rigs I made


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: aimsml on April 24, 2016, 07:42:04 PM
Hello.

It's true. I have the same problem.

My effictive average Hashrate is on both miners I use way off (about 5-10 MH/s).

Miner1:
Reported 142,1 MH/s; Effective Average Hashrate 136.5 MH/s (which is on the higher side, it can go down to almost 130 MH/s)

Miner2:
Reported 134,3 MH/s; Effective Average Hashrate 125.8 MH/s

Pool: Ethermine;
Miner: Claymore's miner in eth only mode.
Windows 7 with mixed GPUs.

I'am aware of the dev fee, but it shouldn't be more than 1,5 MH/s.
With this miner I have almost no invalid shares, and it restarts if anything happens - which is great. But also more watt consumption and apparently no real average (24h) MH/s gain. (reported hashrate is about 5% higher with this miner).

Anyone else with this problem?

What is the maximum value -ethi? 100 or 36 or 16
If you put -ethi 100 heshrate high, if put -ethi -16,384 heshrate low, but SHARES are located quickly. There is no stability in finding SHARES
What is the problem?


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: gribgo on April 24, 2016, 07:44:52 PM
Hi! Claymore.
Are there any news on solomining option and + getting the jobs out of geth running aside?
thank you
peace


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 24, 2016, 07:55:20 PM
Hello.

It's true. I have the same problem.

My effictive average Hashrate is on both miners I use way off (about 5-10 MH/s).

Miner1:
Reported 142,1 MH/s; Effective Average Hashrate 136.5 MH/s (which is on the higher side, it can go down to almost 130 MH/s)

Miner2:
Reported 134,3 MH/s; Effective Average Hashrate 125.8 MH/s

Pool: Ethermine;
Miner: Claymore's miner in eth only mode.
Windows 7 with mixed GPUs.

I'am aware of the dev fee, but it shouldn't be more than 1,5 MH/s.
With this miner I have almost no invalid shares, and it restarts if anything happens - which is great. But also more watt consumption and apparently no real average (24h) MH/s gain. (reported hashrate is about 5% higher with this miner).

Anyone else with this problem?

What is the maximum value -ethi? 100 or 36 or 16
If you put -ethi 100 heshrate high, if put -ethi -16,384 heshrate low, but SHARES are located quickly. There is no stability in finding SHARES
What is the problem?

Max "-ethi" value is 32 but it is not a good idea to set it above 16, next update will use 8 by default. At 32 one GPU round can take up to 1sec (depends on GPU) and when miner gets new job it cannot cancel current GPU round so it will lose up to 500ms in average, for 15sec block time it is up to 3-4% of lost time.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: tbearhere on April 24, 2016, 07:59:47 PM
How much hash do you get on the 970 gtx gigabyte g1?  Thx


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Claymore on April 24, 2016, 08:03:30 PM
Hi! Claymore.
Are there any news on solomining option and + getting the jobs out of geth running aside?
thank you
peace

I'm working on a 3-in-1 utility:
1. pool proxy for my miner (allows to change settings/pools easily for large farms).
2. proxy for solo mode.
3. Monitoring/management + web server for monitoring.

Solo will be available with this utility - you point all your rigs to this utility and point this utility to geth.
Hope to release first version in a few days.

Next update will be available within 24 hours and will include CRC check for DAGs (no more corrupted DAGs) and Failover.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: Hagmonar on April 24, 2016, 08:27:41 PM
Hi! Claymore.
Are there any news on solomining option and + getting the jobs out of geth running aside?
thank you
peace

I'm working on a 3-in-1 utility:
1. pool proxy for my miner (allows to change settings/pools easily for large farms).
2. proxy for solo mode.
3. Monitoring/management + web server for monitoring.

Solo will be available with this utility - you point all your rigs to this utility and point this utility to geth.
Hope to release first version in a few days.

Next update will be available within 24 hours and will include CRC check for DAGs (no more corrupted DAGs) and Failover.

That is good.

Can your program also check if the geth is working properly and updating the blocks. Sometimes it will be stuck and the miner will mine the same block all the time.


Title: Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
Post by: kanoptx on April 24, 2016, 09:47:06 PM
Hi! Claymore.
Are there any news on solomining option and + getting the jobs out of geth running aside?
thank you
peace

I'm working on a 3-in-1 utility:
1. pool proxy for my miner (allows to change settings/pools easily for large farms).
2. proxy for solo mode.
3. Monitoring/management + web server for monitoring.

Solo will be available with this utility - you point all your rigs to this utility and point this utility to geth.
Hope to release first version in a few days.

Next update will be available within 24 hours and will include CRC check for DAGs (no more corrupted DAGs) and Failover.

That is good.

Can your program also check if the geth is working properly and updating the blocks. Sometimes it will be