|
Title: [WTB] A2 terminator hash boards working / non-working Post by: mjgraham on June 13, 2016, 02:45:17 AM Hello everyone I was looking to see if anyone had any old boards they had sitting around and wanted to possibly sell them. I am looking for boards of any kind, if you have some and can tell me a bit about them (color, number of chips, what it did/does). I have been able to repair a few that I have gotten and would like to get better at working on them. If you have any or want to ask anything else you can PM me, I am located in the USA so that may play a factor as well.
Thanks Title: Re: [WTB] A2 terminator hash boards working / non-working Post by: VirosaGITS on June 13, 2016, 04:19:46 AM It is, this is a discussion board, the marketplace is this way;
https://bitcointalk.org/index.php?board=75.0 You can move this thread yourself, by clicking edit on your post, advanced options. Title: [WTB] A2 terminator hash boards working / non-working Post by: mjgraham on June 20, 2016, 04:22:19 AM bump
Title: Re: [WTB] A2 terminator hash boards working / non-working Post by: mjgraham on June 30, 2016, 02:51:16 AM up
Title: Re: [WTB] A2 terminator hash boards working / non-working Post by: usao on June 30, 2016, 02:44:08 PM Ive got a 6-board unit, but the last board is just blinking LEDs and is not recognized by the controller. Only 5 active borads.
I would like to get this 6th board going, do you know what the blinking green led's mean? Is this an easy fix? Title: Re: [WTB] A2 terminator hash boards working / non-working Post by: mjgraham on June 30, 2016, 09:09:01 PM What it means it for some reason it is not communicating with the PI through the controller, I would try swapping two of the cables and see if it is found then, you may have a bad data cable or controller. Blinking lights are a good thing, at least the hash board is OK.
|