Bitcoin Forum

I currently have a Corsair CX750 80+ Bronze Certified running my s5. It has no problems and the miner itself works perfectly fine. I am using the paperclip trick to keep the PSU on and use the switch in the back to turn it off/on.
I now want to control when it is off and on with an Arduino. The best way I can think of doing this is connecting a transistor switch to the pins of the PSU and the Arduino.

My question is what type of transistor should I get? I did a bit of research and found that transistors are made to handle only specific loads so obviously I cannot get something too weak.
I guess the real question is how many amps/volts are passed between PS_on and ground (the wires that the paperclip are in) on the 24 pin? If I can figure this out I can reasonably find a transistor that will work.

If there is a significantly easier way to do this and I am just a moron, please let me know. I am trying not to buy another PSU to do this and I already have the Arduino if that helps.

The current draw should be on the order of milliamps, and no more than 5VDC. Pretty much any general purpose BJT or FET should work. That's exactly how the external turnon circuit on my server PSU interface boards works.

So something like this would be ok?
IRF520 MOSFET Driver Module for Arduino
http://www.ebay.com/itm/New-1-pc-IRF520-MOS-FET-Driver-Module-for-Arduino-High-Quality-LA-/262253821338?hash=item3d0f8bbd9a:g:bfgAAOSwpRRWohtY

Also

It's definitely overkill for what you're doing, but yes it should work. The thing to look for is logic-level drive, which that does.

Ok, thank you so much for your help. I really appreciate it.