Title: AsRock 970 Extreme4 error code:00 Post by: fortif78 on March 18, 2013, 12:10:28 AM I've just put together a new rig, specs are as follows:
Mobo: AsRock970 Extreme4 CPU: Sempron 145 PSU: XFX 850 Watt GPU: 2x 6950 HDD: 250 Gb Seagate RAM: 4 Gb Corsair 1333 Mhz DDR3 When I boot up the computer I get no display or anything. Everything connected to the board turns on but the board shows a 00 error code in its display LED. If anyone has had any experience with this motherboard, any advice would be greatly appreciated. Thanks! -fort Title: Re: AsRock 970 Extreme4 error code:00 Post by: davecoin on March 18, 2013, 12:47:04 AM Dr. Debug code 00 is not used.
Unplug one video cards and try again. Also clear the CMOS. There's a button near the top left side of the motherboard. Title: Re: AsRock 970 Extreme4 error code:00 Post by: fortif78 on March 18, 2013, 03:46:28 PM Dr. Debug code 00 is not used. Unplug one video cards and try again. Also clear the CMOS. There's a button near the top left side of the motherboard. Thanks for the response. I tried both and no luck :-\ I'm starting to think its the board. -fort Title: Re: AsRock 970 Extreme4 error code:00 Post by: Morblias on March 18, 2013, 04:14:26 PM I had this happen on an AsRock Mobo before and had to return it and get a replacement. Can't remember the exact model since it was a few years ago.
Title: Re: AsRock 970 Extreme4 error code:00 Post by: kpriess on March 18, 2013, 04:54:04 PM I would try switching RAM slots and then taking that CMOS battery off for a couple of minutes..
|