|
Title: KNC Titan help - Firmware Post by: kcheel on January 12, 2017, 10:17:58 PM Looking to see if anyone can point me in the right direction regarding reinstalling the Firmware image on to the SD card. KNC's site is not up any longer and I can't find instructions on how to do it or even find the firmware image itself. Reason I am looking is my Batch 1 Titan stopped working, controller screen is just blank. Would like to try and reflash the firmware image to the SD and make sure its ok before I write off the controller as being bad. Thanks for any help.
Title: Re: KNC Titan help - Firmware Post by: Lafu on January 12, 2017, 11:06:31 PM Looking to see if anyone can point me in the right direction regarding reinstalling the Firmware image on to the SD card. KNC's site is not up any longer and I can't find instructions on how to do it or even find the firmware image itself. Reason I am looking is my Batch 1 Titan stopped working, controller screen is just blank. Would like to try and reflash the firmware image to the SD and make sure its ok before I write off the controller as being bad. Thanks for any help. I have somthing for you thats help ! get here and you found all the firmewares cheers https://www.cryptopia.co.nz/Forum/Thread/1046 (https://www.cryptopia.co.nz/Forum/Thread/1046) Title: Re: KNC Titan help - Firmware Post by: kcheel on January 13, 2017, 03:57:22 PM Looking to see if anyone can point me in the right direction regarding reinstalling the Firmware image on to the SD card. KNC's site is not up any longer and I can't find instructions on how to do it or even find the firmware image itself. Reason I am looking is my Batch 1 Titan stopped working, controller screen is just blank. Would like to try and reflash the firmware image to the SD and make sure its ok before I write off the controller as being bad. Thanks for any help. I have somthing for you thats help ! get here and you found all the firmewares cheers https://www.cryptopia.co.nz/Forum/Thread/1046 (https://www.cryptopia.co.nz/Forum/Thread/1046) Thanks! I had finally found a download for 2.0 and got it flashed. Good news is my controller lit up, showed the IP address, etc. and I can access the control panel but so far I can't seem to get it to hash. Says its running and pool shows its connected but 0 speed. So making some progress but not quite there yet. Title: Re: KNC Titan help - Firmware Post by: lovelorn1975 on July 06, 2018, 04:40:32 AM Hi to every one.
I have the same problem but unfortunately the link suggested on Cryptopia in not valid anymore ( crypto-is close the help center service ) Can you direct or contact me in order to have some indication? Best Regards Title: Re: KNC Titan help - Firmware Post by: Lafu on July 07, 2018, 12:14:31 PM Hi to every one. I have the same problem but unfortunately the link suggested on Cryptopia in not valid anymore ( crypto-is close the help center service ) Can you direct or contact me in order to have some indication? Best Regards I look what i can do to get the links from the thread from a Dev ! If i get it i will post it here . Regards Lafu Title: Re: KNC Titan help - Firmware Post by: Lafu on July 07, 2018, 06:38:47 PM Hopefully for someone maybe helps KNC Miner Batches Mercury/Saturn/Jupiter - October Batch Version 0.90 (http://4thamd.com/KnC/msj-oct/kncminer-0.90.bin) Version 0.91 (http://4thamd.com/KnC/msj-oct/kncminer-0.91.bin) Version 0.92 (http://4thamd.com/KnC/msj-oct/kncminer-0.92.bin) Version 0.93 (http://4thamd.com/KnC/msj-oct/kncminer-0.93.bin) Version 0.94 (http://4thamd.com/KnC/msj-oct/kncminer-0.94.bin) Version 0.95 (http://4thamd.com/KnC/msj-oct/kncminer-0.95.bin) Version 0.96 (http://4thamd.com/KnC/msj-oct/kncminer-0.96.bin) Version 0.96.1 (http://4thamd.com/KnC/msj-oct/kncminer-0.96.1.bin) Version 0.97 (http://4thamd.com/KnC/msj-oct/kncminer-0.97.bin) Version 0.98 (http://4thamd.com/KnC/msj-oct/kncminer-0.98.bin) Version 0.98.1 (http://4thamd.com/KnC/msj-oct/kncminer-0.98.1.bin) Version 0.99 (http://4thamd.com/KnC/msj-oct/kncminer-0.99.bin) Version 0.99-tune (http://4thamd.com/KnC/msj-oct/kncminer-0.99-tune.bin) Version 0.99.1-tune (http://4thamd.com/KnC/msj-oct/kncminer-0.99.1-tune.bin) Version 0.99.2-tune (http://4thamd.com/KnC/msj-oct/kncminer-0.99.2-tune.bin) SD Image File - v0.96.1 (http://4thamd.com/KnC/msj-oct/SD_image_0.96.1.zip) Manual Reboot Patch - v0.90-0.92 (http://4thamd.com/KnC/msj-oct/kncminer-reboot.bin) Enable All Cores At Reboot Patch (http://4thamd.com/KnC/msj-oct/enablecores.bin) Diagnostic Tool 1.0 (http://4thamd.com/KnC/msj-oct/diag-1.0.bin) BertMod BM v0.1 for KnC v0.93 (http://4thamd.com/KnC/msj-oct/bertmod_0_1_for_knc_0_93.bin) BM v0.2 for KnC v0.94 (http://4thamd.com/KnC/msj-oct/bertmod_0_2_for_knc_0_94.bin) BM v0.2.1 for KnC v0.94 (http://4thamd.com/KnC/msj-oct/bertmod_0_2_1_for_knc_0_94.bin) BM ZPM Fix for KnC v0.96 (http://4thamd.com/KnC/msj-oct/bertmod_zpmfix_knc_0_96.bin) BM v0.3 for KnC v0.98 (http://4thamd.com/KnC/msj-oct/bertmod_0_3_for_knc_0_98.bin) BM v0.4 BETA for KnC v0.99 (http://4thamd.com/KnC/msj-oct/bertmod_0_4_BETA_for_knc_0_99.bin) BM v0.4 for KnC v0.99 (http://4thamd.com/KnC/msj-oct/bertmod_0_4_for_knc_0_99.bin) Jupiter - November Batch Version v0.99-E (http://4thamd.com/KnC/jup-nov/kncminer-0.99-E.bin) Version v0.99.1-E (http://4thamd.com/KnC/jup-nov/kncminer-0.99.1-E.bin) Version v0.99.2-E (http://4thamd.com/KnC/jup-nov/kncminer-0.99.2-E.bin) Diagnostic Tool 1.2-E (http://4thamd.com/KnC/jup-nov/diag-1.2-E.bin) Mercury/Saturn/Jupiter - Unified October/November Batches Version 1.00 (http://4thamd.com/KnC/msj-uni/kncminer-1.00.bin) Version 1.01 (http://4thamd.com/KnC/msj-uni/kncminer-1.01.bin) SD Image File - v1.01 (http://4thamd.com/KnC/msj-uni/kncminer-1.01_SD.zip) Neptune Version RC6 (http://4thamd.com/KnC/neptune/neptune-rc6.bin) Version RC8 (http://4thamd.com/KnC/neptune/neptune-rc8.bin) Version RC9 (http://4thamd.com/KnC/neptune/neptune-rc9.bin) Version 1.00 (http://4thamd.com/KnC/neptune/neptune-1.00.bin) Version 1.02 (http://4thamd.com/KnC/neptune/neptune-1.02.bin) Version 1.05 (http://4thamd.com/KnC/neptune/neptune-1.05.bin) Version 1.06 (http://4thamd.com/KnC/neptune/neptune-1.06.bin) Version 1.06s (http://4thamd.com/KnC/neptune/neptune-1.06s.bin) Version Information / Changelog (http://4thamd.com/KnC/neptune/neptune-changelog.txt) SD Image File - vRC6 (http://4thamd.com/KnC/neptune/SD_Neptune_rc6.zip) Neptune Setup Guide (http://4thamd.com/KnC/neptune/Manual_Neptune_1.0.pdf) Adapter Setup Guide (http://4thamd.com/KnC/neptune/Y%20adapter%20cable%20correct%20set%20up.pdf) Titan Version 1.02 (http://4thamd.com/KnC/titan/titan-upgrade-1.02.bin) Version 1.03 (http://4thamd.com/KnC/titan/titan-upgrade-1.03.bin) Version 1.04 (http://4thamd.com/KnC/titan/titan-upgrade-1.04.bin) Version 1.05 (http://4thamd.com/KnC/titan/titan-upgrade-1.05.bin) Version 1.10 (http://4thamd.com/KnC/titan/titan-upgrade-1.10.bin) Version 1.11 (http://4thamd.com/KnC/titan/titan-upgrade-1.11.bin) Version 1.14 (http://4thamd.com/KnC/titan/titan-upgrade-1.14.bin) Version 1.14-1 (http://4thamd.com/KnC/titan/titan-upgrade-1.14-1.bin) Version 1.15 (http://4thamd.com/KnC/titan/titan-upgrade-1.15.bin) Version 1.94 Beta (http://4thamd.com/KnC/titan/titan-upgrade-1.94-beta.bin) Version 1.95 (http://4thamd.com/KnC/titan/titan-upgrade-1.95.bin) Version 1.96 (http://4thamd.com/KnC/titan/titan-upgrade-1.96.bin) Version 1.97 (http://4thamd.com/KnC/titan/titan-upgrade-1.97.bin) Version 2.00 (http://4thamd.com/KnC/titan/titan-upgrade-2.00.bin) Version Information / Changelog (http://4thamd.com/KnC/titan/titan-changelog.txt) SD Image File - v1.01 (https://github.com/KnCMiner/titan/releases/download/v1.01/titan-1.01.img.bz2) SD Image File - v1.02 (https://github.com/KnCMiner/titan/releases/download/v1.02/titan-1.02.img.bz2) SD Image File - v2.00 (https://github.com/KnCMiner/titan/releases/download/v2.00/titan-2.00.img) Titan Setup Guide (http://4thamd.com/KnC/titan/Manual_Titan_1.pdf) Adapter Setup Guide (http://4thamd.com/KnC/neptune/Y%20adapter%20cable%20correct%20set%20up.pdf) Source: http://4thamd.com/KnC/ (http://4thamd.com/KnC/) |