Bitcoin Forum

Alternate cryptocurrencies => Pools (Altcoins) => Topic started by: crackfoo on January 13, 2017, 05:14:03 PM



Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on January 13, 2017, 05:14:03 PM
======================================
http://www.zpool.ca/images/zlogo.png
http://www.zpool.ca
BTC Payouts
20+ Algos
130+ Coins to mine
DDoS Protected
2% Fee
5% auto exchange

======================================

zpool offers 30+ algos and 210+ currencies to mine.  

Payouts occur every 4 hours for balances over 0.015 BTC. If you don't earn that much, every Sunday miners with 0.0015 or more are paid out.

The advantage of the pool is that you can utilize your ASIC equipment  and GPU's to earn BTC. You can however, mine using any currency we currently have enabled to receive your payouts in that currency. However, Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amounts of the currency to pay miners. It is always recommended to use BTC as altcoins can be dropped from exchanges and our pool at anytime, forfeiting any earnings.

Utilizing unique fractional hashrate distribution over available coins, we minimize blockchain disruption and maximize miners hash and profitability.

zpool has the ability to automatically switch between most profitable algos as well as coins with its multialgo functionality. See here for setup instructions:

http://www.zpool.ca/site/multialgo

For ports and stratum hosts check out:

http://www.zpool.ca

Custom DIFF can be set using the password field. This can be used to support large ASIC devices such as Antminers, Titans, Nice Hash and other rentals:

http://www.zpool.ca/site/diff

Any issues, please log a support ticket: http://support.zpool.ca

Cheers and Happy Hashing!

Twitter: https://twitter.com/_zpool_

===================================

Russian Video discussing zpool.ca pool and miner setups:

https://www.youtube.com/watch?v=yqHwMGVPslI

===================================

Independent profit test performed by pikachuy, comparing profits over 5 different pools/setups.

https://bitcointalk.org/index.php?topic=2067256

===================================



Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on January 13, 2017, 05:14:15 PM
█▓▒░-< [ FlexFee™ >-░▒▓█

FlexFee™ is an exclusive fee system on www.zpool.ca only. This fee system is enabled on select algos which reduces the fee's on the pool based on the hashrate. The more hashrate, the less fees. Check for the green lines on the pool hashrate graphs to know if they are FlexFee™ enabled.

█▓▒░-< [ ASIC miners >-░▒▓█

iBeLink DM11g: http://zpool.ca/?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH

█▓▒░-< [ Hashtap™ >-░▒▓█

Currently OFFLINE

█▓▒░-< [ Android App >-░▒▓█

Thanks to buffy007 for this handy app to monitor and track your miners and earning!

https://bitcointalk.org/index.php?topic=2183226.0


█▓▒░-< [ Custom multi algo miners >-░▒▓█

JaredKaragen -

https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405

minerx117 - NEMOSMINER multi algo profit switching NVIDIA miner for ZPOOL

https://bitcointalk.org/index.php?topic=1777336.msg17729122


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on January 18, 2017, 03:40:30 PM
Recently we've made improvements to out stratum servers. This should improve the stability of large SHA256 & SCRYPT ASCI miners. We've reduced the number of work restarts by excluding AUXPOW coins from issuing new work requests. This should show the biggest improvements on the algos which have a lot of AUXPOW coins such as SHA256 and SCRYPT but will see improvements on any algo with AUXPOW coins enabled.  Inadvertently, this should also have a slight improvement to NiceHash miners as NH charges extra fee's for work restarts.

Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on January 19, 2017, 12:56:48 AM
0.1 $BTC bounty to complete livecoin.net exchange trading: https://github.com/tpruvot/yiimp/issues/68 … Should be quick and easy for the experienced php developer

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: aarons6 on January 27, 2017, 02:50:42 AM
what is the hashtap tab and how does it work.. is it like nicehash where you rent the hash from the pool towards another pool? and how does the value of this hash get distributed to the miners?

it seems like a cool idea, but there isnt much info about it.


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on January 27, 2017, 03:19:12 PM
what is the hashtap tab and how does it work.. is it like nicehash where you rent the hash from the pool towards another pool? and how does the value of this hash get distributed to the miners?

it seems like a cool idea, but there isnt much info about it.


Yes, it's basically similar to NH. You create an account, fund it with BTC to the unique address you get generated, then add your pools for which ever algos you want to rent hash from.

You only get charged the CURRENT HashTap price, but you can set a MAX price you're willing to pay. Factors that can affect how much hash you get is your MAX price, your remote pool's DIFF, amount of miners to rent from, your MAX hash.

Unlike NH, there are no penalties for work restarts.

When I get some time, I'll try and write some FAQ's and get them available online.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: aarons6 on January 27, 2017, 11:07:00 PM
what is the hashtap tab and how does it work.. is it like nicehash where you rent the hash from the pool towards another pool? and how does the value of this hash get distributed to the miners?

it seems like a cool idea, but there isnt much info about it.


Yes, it's basically similar to NH. You create an account, fund it with BTC to the unique address you get generated, then add your pools for which ever algos you want to rent hash from.

You only get charged the CURRENT HashTap price, but you can set a MAX price you're willing to pay. Factors that can affect how much hash you get is your MAX price, your remote pool's DIFF, amount of miners to rent from, your MAX hash.

Unlike NH, there are no penalties for work restarts.

When I get some time, I'll try and write some FAQ's and get them available online.

Cheers

its a great idea but in order for anyone to want to buy our hash it would have to be cheaper than NH.. unfortunately if you sold the hash that low it would affect our payouts as NH seems to always be at or under 100% bitcoin payout.


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on January 27, 2017, 11:22:09 PM

its a great idea but in order for anyone to want to buy our hash it would have to be cheaper than NH.. unfortunately if you sold the hash that low it would affect our payouts as NH seems to always be at or under 100% bitcoin payout.


NH doesn't have all the algos I offer and don't forget you loose ~15-20% using NH on multipools due to the extra fees for work restarts. Pricing for HashTap is real world based off the coins in the pool, which you can see on each algo's stats.

I won't be underselling the miners, it is the miners multpool after all :)


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: aarons6 on January 28, 2017, 01:24:23 AM

its a great idea but in order for anyone to want to buy our hash it would have to be cheaper than NH.. unfortunately if you sold the hash that low it would affect our payouts as NH seems to always be at or under 100% bitcoin payout.


NH doesn't have all the algos I offer and don't forget you loose ~15-20% using NH on multipools due to the extra fees for work restarts. Pricing for HashTap is real world based off the coins in the pool, which you can see on each algo's stats.

I won't be underselling the miners, it is the miners multpool after all :)

sounds interesting i cant wait to see how it works out..
i have one other question tho that i been noticing.. for like sha256 when you go to the pool tab you see all the coins and the exchange rate for the coins.. why is it that most of the time the majority of the hash is on coins far down the list and not on the top one? is it just lag and it takes time to switch the miners?



Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on January 28, 2017, 01:36:35 AM

sounds interesting i cant wait to see how it works out..
i have one other question tho that i been noticing.. for like sha256 when you go to the pool tab you see all the coins and the exchange rate for the coins.. why is it that most of the time the majority of the hash is on coins far down the list and not on the top one? is it just lag and it takes time to switch the miners?



yeah I hope it works well for people. I think we'll have a better idea once more people start using it and giving me feedback...

Yeh, coins that are getting mined but are down the list were most likely just at the top and dropped down. Once it detects it needs to find a more profitable coin, the system then needs to identify all the workers on the coin, their hashrates, and which other coin(s) their hash should go to next. Then start moving them around again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Newton90 on February 01, 2017, 04:12:23 PM
what is new option Hash Tap?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 01, 2017, 04:19:58 PM
what is new option Hash Tap?

I posted a bit of info here about it:

https://bitcointalk.org/index.php?topic=1751272.msg17641979#msg17641979

It's essentially a hash renting service so you can rent hash from the pool to use on other pools. For instance, if you want to mine on some solo pool, you can rent the hash and point it at the solo pool.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: psycodad on February 01, 2017, 05:47:09 PM
Nice to see zpool grow and improve continously!

Your HashTap sounds pretty cool, I like especially the part about no penalties for work restarts.
Do you offer an API to query current prices, query balance, rent hash, adjust maximum price etc. programmatically ?

Cheers - psycodad


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 01, 2017, 06:54:51 PM
Nice to see zpool grow and improve continously!

Your HashTap sounds pretty cool, I like especially the part about no penalties for work restarts.
Do you offer an API to query current prices, query balance, rent hash, adjust maximum price etc. programmatically ?

Cheers - psycodad

Thanks!

All the rental stuff can be found in our API:

http://www.zpool.ca/site/api

You can't create new jobs, but you can start and stop them, change price and hashrates and view the status of all jobs.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: psycodad on February 01, 2017, 07:29:11 PM
Nice to see zpool grow and improve continously!

Your HashTap sounds pretty cool, I like especially the part about no penalties for work restarts.
Do you offer an API to query current prices, query balance, rent hash, adjust maximum price etc. programmatically ?

Cheers - psycodad

Thanks!

All the rental stuff can be found in our API:

http://www.zpool.ca/site/api

You can't create new jobs, but you can start and stop them, change price and hashrates and view the status of all jobs.

Thank you, did miss that page. That seems to have all functionality I need, will definitely give it a whirl.
One thing I still not completely understand is: How do I determine the lowest price that I have to pay to get miners/hash (I am bit fixed to think about it in NH terms where I lookup the lowest order that gets hash).
Or is HashTap from the miner and pool perspective just "another" coin, which gets switched to when the renter offers a better profit than all other coins at that moment?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 01, 2017, 07:52:45 PM
Nice to see zpool grow and improve continously!

Your HashTap sounds pretty cool, I like especially the part about no penalties for work restarts.
Do you offer an API to query current prices, query balance, rent hash, adjust maximum price etc. programmatically ?

Cheers - psycodad

Thanks!

All the rental stuff can be found in our API:

http://www.zpool.ca/site/api

You can't create new jobs, but you can start and stop them, change price and hashrates and view the status of all jobs.

Thank you, did miss that page. That seems to have all functionality I need, will definitely give it a whirl.
One thing I still not completely understand is: How do I determine the lowest price that I have to pay to get miners/hash (I am bit fixed to think about it in NH terms where I lookup the lowest order that gets hash).
Or is HashTap from the miner and pool perspective just "another" coin, which gets switched to when the renter offers a better profit than all other coins at that moment?


The HashTap price, is the min price you'd need to set, to get hash from the pool.

So if HashTap price is currently 1 (and this is always fluctuating since all the coins on the pool do the same) and if you set your MaxPrice to 1... you get hash while it's still 1 and if it goes lower to say 0.75 etc... if HashTap goes over your max price, hash will stop but you'll only pay whatever the HashTap price is. So even if you set your Max Price to 5, you won't pay 5.... unless of course the price booms to 5, but thats not realistic, you'll just allow for more fluctuations and pay only the HashTap price...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: psycodad on February 04, 2017, 06:00:33 PM
Wanted to give it a try, deposited 0.01 BTC but I seem unable to find out how to rent scrypt miners, scrypt is not under the algo list though it is listed with a hash tap price on the right.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 06, 2017, 02:33:31 PM
Wanted to give it a try, deposited 0.01 BTC but I seem unable to find out how to rent scrypt miners, scrypt is not under the algo list though it is listed with a hash tap price on the right.

I haven't been able to test scrypt yet so it hasn't been enabled but I think it will be problematic like SHA256 is since there are so many merged coins, it causes instability.

I'll try and get a list posted to the site which shows which algos are actually enabled. The HashTap price unfortunately shows on all algos even if I don't have it enabled.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 06, 2017, 07:56:18 PM
Wanted to give it a try, deposited 0.01 BTC but I seem unable to find out how to rent scrypt miners, scrypt is not under the algo list though it is listed with a hash tap price on the right.

I haven't been able to test scrypt yet so it hasn't been enabled but I think it will be problematic like SHA256 is since there are so many merged coins, it causes instability.

I'll try and get a list posted to the site which shows which algos are actually enabled. The HashTap price unfortunately shows on all algos even if I don't have it enabled.

I tested scrypt for a while today and it seemed pretty good. I've allowed creating new taps for scrypt but will be keeping an eye on it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: psycodad on February 06, 2017, 08:04:57 PM
Wanted to give it a try, deposited 0.01 BTC but I seem unable to find out how to rent scrypt miners, scrypt is not under the algo list though it is listed with a hash tap price on the right.

I haven't been able to test scrypt yet so it hasn't been enabled but I think it will be problematic like SHA256 is since there are so many merged coins, it causes instability.

I'll try and get a list posted to the site which shows which algos are actually enabled. The HashTap price unfortunately shows on all algos even if I don't have it enabled.

I tested scrypt for a while today and it seemed pretty good. I've allowed creating new taps for scrypt but will be keeping an eye on it.

Thanks for your quick reaction, will give it another whirl later this week.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 07, 2017, 12:35:50 AM
We've had to drop the argon2 algo. I've struggled to keep the coins alive but alas I can't get any peers anymore.

R.I.P.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 08, 2017, 11:27:33 PM
We've had to drop the argon2 algo. I've struggled to keep the coins alive but alas I can't get any peers anymore.

R.I.P.



Sad to see it go.  Kind of liked the relatively rapid findings of coins, even though they aren't worth much.  They sure added up.

When you removed the algo, though, I think somewhere it is still offering argon2 as the algo to mine somewhere when it determines it's the best one to use internally.

I've noticed my scripts would just cycle through even though your site says (for example) yescrypt is the best algo to mine.  In reality, I think yescrypt is 2nd best, but argon2 is internally being seen as the 1st best.

Thus, my script would blow past yescrypt (stating workio thread dead, exiting).

I've fixed the computers I'm currently using to mine (REM the line with the argon2 and deleting all "argon2" in the -p option), but I can't get to all of them yet.  I have a few computers mining at my parents and brother's place (they are cool with it), but I haven't had a chance to remote into all of them (require a lot of their participation in setting up teamviewer).

Can you fix it on your end (by removing whatever it is referring to the argon2).  I can only presume that sometimes argon2 is no longer the "best" one to mine, so all of my mining computers start mining the correct best algo.  But sometimes only half works again (only because half of them I fixed by removing the argon2 in the script).


I hope I am making sense.  Sorry for long post.  No idea how to explain it better.

thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on February 08, 2017, 11:53:54 PM
Scrypt port dropping out like crazy

bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512      229.1 kh/s   1
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512      458.1 kh/s   
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512   


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 09, 2017, 12:03:28 AM
Also, what's up with the miner count?

neoscrypt   167   2.3615%   386.6 kh/s   

I only have one computer mining neoscrypt, but it says i have 167 (and it keeps growing and shrinking).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 09, 2017, 12:41:10 AM
Scrypt port dropping out like crazy

bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
...

Just now?? the server hasn't crashed or anything.... been going ~24h since last restart....



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on February 09, 2017, 06:12:17 AM
Scrypt port dropping out like crazy

bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
...

Just now?? the server hasn't crashed or anything.... been going ~24h since last restart....



Yes that was status at that time, I am mining other algos without that issue, seems to be ok now



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 09, 2017, 08:13:47 PM
....

Thanks for this, but please only post it once.

Can you provide virus scanner results for the files and MD5 checksums?

I've added a link to your thread on the 2nd post here.

Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: crackfoo on February 10, 2017, 01:46:50 PM
0.1 $BTC bounty to complete livecoin.net exchange trading: https://github.com/tpruvot/yiimp/issues/68 … Should be quick and easy for the experienced php developer

Cheers

Still looking for someone to do this. 0.1BTC OBO


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: denravonska on February 11, 2017, 09:07:06 AM
Scrypt port dropping out like crazy

bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
...

Just now?? the server hasn't crashed or anything.... been going ~24h since last restart....



I have also been having issues the past couple of days:

Quote
[2017-02-11 06:27:49] Checking main pool: ^P^K<9C>
[2017-02-11 06:27:49] Stratum connection failed: Could not resolve host: http(null)
[2017-02-11 06:28:49] Checking main pool: `<F5><9B>
[2017-02-11 06:28:49] Stratum connection failed: Could not resolve host: http(null)

My stats says I currently have 28 scrypt miners connected :D I'm not alone though. The total number of scrypt miners went from 900 to 6000 and is now hovering at 9000.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 12, 2017, 01:53:58 PM
Scrypt port dropping out like crazy

bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
bfgminer/5.4.2   c=BTC,d=512   scrypt   512         
...

Just now?? the server hasn't crashed or anything.... been going ~24h since last restart....



I have also been having issues the past couple of days:

Quote
[2017-02-11 06:27:49] Checking main pool: ^P^K<9C>
[2017-02-11 06:27:49] Stratum connection failed: Could not resolve host: http(null)
[2017-02-11 06:28:49] Checking main pool: `<F5><9B>
[2017-02-11 06:28:49] Stratum connection failed: Could not resolve host: http(null)

My stats says I currently have 28 scrypt miners connected :D I'm not alone though. The total number of scrypt miners went from 900 to 6000 and is now hovering at 9000.

Looks like it was some china and russian farms moving around miners. Seems ok now?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 12, 2017, 01:56:34 PM
Looking for a dev to code the equihash algo for the pool. Bounty is set at 0.5BTC

This will allow multipool mining of Komodo (KMD),  ZCash (ZEC), ZClassic (ZCL) and ZDash (ZDASH).

Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on February 13, 2017, 03:39:45 AM
Any chance of adding Diamond to the groestl pool?  Its pretty high on the profit charts right now.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Epsylon3 on February 13, 2017, 01:44:50 PM
diamond use a non standard groestl


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 13, 2017, 02:01:21 PM
diamond use a non standard groestl

yeah, I've tried adding it before and doesn't work.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: denravonska on February 14, 2017, 06:23:45 AM
Looks like it was some china and russian farms moving around miners. Seems ok now?

It still refuses to mine on zpool while other pools work, and the miner count keeps increasing.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 15, 2017, 12:50:27 AM
We've had to drop the argon2 algo. I've struggled to keep the coins alive but alas I can't get any peers anymore.

R.I.P.



Sad to see it go.  Kind of liked the relatively rapid findings of coins, even though they aren't worth much.  They sure added up.

I switched my CPU's to xevan a while back myself;  seemed more profitable in the end.  Even though it's a trickle.

diamond use a non standard groestl

yeah, I've tried adding it before and doesn't work.

I remember mining on DMD-GR for a hot minute; never got a block though.  That was near the beginning of the switch from xpool to zpool.



Glad to see a new thread for the pool.  Ill try and keep up to date and useful as before.
Crackfoo,
Probably sometime this weekend ill let you know when I get 1.08 of my batch file updated with the new algos.  I finally had my surgery and have been crap-tons better the past few days.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 15, 2017, 04:11:05 AM
Looks like it was some china and russian farms moving around miners. Seems ok now?

It still refuses to mine on zpool while other pools work, and the miner count keeps increasing.

I'm due to patch and reboot servers tomorrow so maybe that will help. There shouldn't be any reason you can't connect now though.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 17, 2017, 05:24:54 PM
server maintenance in ~20 mins. Expect some bumps on stratums and varying coin inventory.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: alfaboy23 on February 18, 2017, 01:13:37 AM
server maintenance in ~20 mins. Expect some bumps on stratums and varying coin inventory.

Cheers
Good day!
Is the m7m algo still on maintenance or you have already removed it from your pool?

Thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 18, 2017, 01:24:28 AM
server maintenance in ~20 mins. Expect some bumps on stratums and varying coin inventory.

Cheers
Good day!
Is the m7m algo still on maintenance or you have already removed it from your pool?

Thanks.


Well, turned out they upgraded wallet and that needed to happen too and we're still syncing that dang wallet.

Hope to have it online as soon as it's synced.

At ~450k blocks out of ~1.3 million....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on February 18, 2017, 05:39:54 AM
is there any way to adjust the graphs page so the values are actually readable? specially  the profit graph for sha256..




Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: minerx117 on February 20, 2017, 01:01:59 AM
Custom multi algo miners:

minerx117 - NEMOSMINER multi algo profit switching NVIDIA miner for ZPOOL v1.2.1 (untested/unverified)

https://bitcointalk.org/index.php?topic=1777336.msg17729122#msg17729122

currently working on v1.5 ,          will be a big update adding support for another    7 algos,    which will make this miner multi pool mine    18 different algos   over   50 different coins   and will always mine which every is the most profitable, auto switches algo/coin to max profitability.         see www.ZPOOL.ca for more info


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 20, 2017, 01:31:41 AM
is there any way to adjust the graphs page so the values are actually readable? specially  the profit graph for sha256..




yeah I've tried fiddling with them but didn't have much luck. :/ jqplot is pretty annoying


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 20, 2017, 09:50:57 PM
Also, what's up with the miner count?

neoscrypt   167   2.3615%   386.6 kh/s   

I only have one computer mining neoscrypt, but it says i have 167 (and it keeps growing and shrinking).

It's now at 1679 miners for neoscrypt even though I have a single miner.

neoscrypt   1679   1.9878%   349.4 kh/s   


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 20, 2017, 10:14:11 PM
Also, what's up with the miner count?

neoscrypt   167   2.3615%   386.6 kh/s   

I only have one computer mining neoscrypt, but it says i have 167 (and it keeps growing and shrinking).

It's now at 1679 miners for neoscrypt even though I have a single miner.

neoscrypt   1679   1.9878%   349.4 kh/s   

hrmm, it s bit frustrating that the ghosts are hanging around.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 21, 2017, 01:32:06 AM
Note:  Please do not comment this batch file;  leave it out of your quote/replies on this thread to:  save space, and more importantly not confuse people when a new update to the batch is made.   Thanks!

REDISTRIBUTION OF ANY PART OF WHOLE OF THIS CODE FOR PROFIT/DONATION IS STRICTLY FORBIDDEN.  This code is provided for public use, not redistribution under another name for profit.

JK's Network Failure Monitor:  Want a batch file to reset your network adaptor when the connection drops or is unresponsive?  Click Here (https://bitcointalk.org/index.php?topic=1909561.msg18947146#msg18947146).


JK's Silent Miner launcher V 1.0:  Want to launch your miner app and batch file silently in the background like a system service?  Now you can easily.  I didn't have to install any extra support packages on windows 10.  YMMV.

I put this together for another member here on the site whom promised a reward, but in true old fashion;  no answers after providing it to them...

This relies on a simple .vbs file.  You can't execute the script without admin privileges;  that's how VBS works when it handles system commands, can't ever change that. (people have asked).

First, create these files, and leave them all in the same directory:

hider.vbs
Code:
CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 0, False


miner.bat
Code:
ccminer.exe -a skein  -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p c=BTC,skein,stats


hiddenminer.bat
Code:
wscript.exe ".\hider.vbs" ".\miner.bat"

Should be self explanatory on how it works.  It's that simple.

JK's Manual Farm Control Batch V1.0:  Click Here (https://bitcointalk.org/index.php?topic=1751272.msg17933099#msg17933099).  This gives you the ability to update the algo certain farms are using by changing the contents of a text file on the web.  Make one file for all farms, or make several files for separate miners.   This eliminates the need for remote login to the device in any way aside to update the mining software itself..  The miner is simply fetching a single word from a text file through http, and that single word is the algo name.

JK's Automatic Miner Batch file V 1.08
Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP
SET DEV=
SET ID=i7-920
REM NOTE:  ADDY is where you put in your wallet address.  DEV is for device numbers to mine on.  If you have
REM        two video cards, then you will set it as 'SET DEV=-d 0,1' .  If you wish to only use your second
REM        and third video cards, you would use:   'SET DEV=-d 1,2' ... and so on.  ID is just a string to
REM        identify your miner's connection on the wallet page via the password field preview displayed.
REM        leave DEV blank to select all cuda devices.
REM
SET A=ccminer180.exe
SET B=ccminerx11e.exe
SET C=ccminerlyra2.exe
SET D=ccminerlbry1.exe
SET E=ccminerlbry.exe
SET F=ccminer.exe
REM NOTE:  A,B,C,D,E&F are all the ccminer file-names.  You should be able to use path:\to\ccminer.exe if you
REM        so desire.  I highly suggest putting a copy of each ccminer version you are using, in one folder
REM        with this naming structure to keep it simple. 'C:\zPool.ca\ccminer.exe' etc...
REM
SET POOL=mine.zpool.ca
SET COUNTER=0
SET LAST=N/A
SET A01=x13
SET A02=x11
SET A03=qubit
SET A04=x15
SET A05=lyra2v2
SET A06=neoscrypt
SET A07=decred
SET A08=blakecoin
SET A09=c11
SET A10=quark
SET A11=groestl
SET A12=blake2s
SET A13=x14
SET A14=x17
SET A15=nist5
SET A16=skein
SET A17=sib
SET A18=x11evo
SET A19=lbry
SET A20=keccak
SET A21=myr-gr
REM NOTE: Above are all the algos listed with a shorter pointer name.  You can use this reference to disable
REM       an algo in the lines below beginning with 'start "%DEV%:%...' by using the REM command before them
REM       just like you see used to comment this text you are reading.  Be sure to add/remove
REM       the corresponding algo's normalization in the 'SET PASS=%ID...' line.  The currently disabled ones
REM       can be found at the bottom of this batch file outside the main loop.
REM
COLOR 0A
:START
SET CURRENT=NONE
SET /A COUNTER=%COUNTER%+1
SET PASS=%ID%,c=BTC,x17=7.7,nist5=41.9,x11evo=11.8,sib=1.7,x13=10.3,x14=9.6,x15=8.2,x11=12.1,qubit=18.5,blakecoin=4.1,blake2s=1.7,neoscrypt=0.9,decred=2.2,skein=400.0,lbry=270.0,c11=12.74,groestl=37.1,quark=18.4,stats
ECHO Starting miner processes....
START "%DEV%:%A01%" /min %A% %DEV% -r 0 -a %A01% -o stratum+tcp://%A01%.%POOL%:3633 -u %ADDY% -p %PASS%
START "%DEV%:%A02%" /min %A% %DEV% -r 0 -a %A02% -o stratum+tcp://%A02%.%POOL%:3533 -u %ADDY% -p %PASS%
START "%DEV%:%A03%" /min %A% %DEV% -r 0 -a %A03% -o stratum+tcp://%A03%.%POOL%:4733 -u %ADDY% -p %PASS%
START "%DEV%:%A04%" /min %A% %DEV% -r 0 -a %A04% -o stratum+tcp://%A04%.%POOL%:3733 -u %ADDY% -p %PASS%
REM START "%DEV%:%A05%" /min %C% %DEV% -r 0 -a %A05% -o stratum+tcp://%A05%.%POOL%:4533 -u %ADDY% -p %PASS%
START "%DEV%:%A06%" /min %D% %DEV% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS%
START "%DEV%:%A07%" /min %A% %DEV% -r 0 -a %A07% -o stratum+tcp://%A07%.%POOL%:5744 -u %ADDY% -p %PASS%
START "%DEV%:%A08%" /min %A% %DEV% -r 0 -a %A08% -o stratum+tcp://%A08%.%POOL%:5743 -u %ADDY% -p %PASS%
START "%DEV%:%A09%" /min %A% %DEV% -r 0 -a %A09% -o stratum+tcp://%A09%.%POOL%:3573 -u %ADDY% -p %PASS%
START "%DEV%:%A10%" /min %A% %DEV% -r 0 -a %A10% -o stratum+tcp://%A10%.%POOL%:4033 -u %ADDY% -p %PASS%
START "%DEV%:%A11%" /min %A% %DEV% -r 0 -a %A11% -o stratum+tcp://%A11%.%POOL%:5333 -u %ADDY% -p %PASS%
START "%DEV%:%A12%" /min %A% %DEV% -r 0 -a %A12% -o stratum+tcp://%A12%.%POOL%:5766 -u %ADDY% -p %PASS%
START "%DEV%:%A13%" /min %A% %DEV% -r 0 -a %A13% -o stratum+tcp://%A13%.%POOL%:3933 -u %ADDY% -p %PASS%
START "%DEV%:%A14%" /min %A% %DEV% -r 0 -a %A14% -o stratum+tcp://%A14%.%POOL%:3737 -u %ADDY% -p %PASS%
START "%DEV%:%A15%" /min %A% %DEV% -r 0 -a %A15% -o stratum+tcp://%A15%.%POOL%:3833 -u %ADDY% -p %PASS%
START "%DEV%:%A16%" /min %F% %DEV% -r 0 -a %A16% -o stratum+tcp://%A16%.%POOL%:4933 -u %ADDY% -p %PASS%
START "%DEV%:%A17%" /min %A% %DEV% -r 0 -a %A17% -o stratum+tcp://%A17%.%POOL%:5033 -u %ADDY% -p %PASS%
START "%DEV%:%A18%" /min %B% %DEV% -r 0 -a %A18% -o stratum+tcp://%A18%.%POOL%:3553 -u %ADDY% -p %PASS%
START "%DEV%:%A19%" /min %E% %DEV% -r 0 -a %A19% -o stratum+tcp://%A19%.%POOL%:3334 -u %ADDY% -p %PASS%
REM START "%DEV%:%A20%" /min %E% %DEV% -r 0 -a %A20% -o stratum+tcp://%A20%.%POOL%:5133 -u %ADDY% -p %PASS%
REM START "%DEV%:%A21%" /min %F% %DEV% -r 0 -a %A21% -o stratum+tcp://%A21%.%POOL%:5433 -u %ADDY% -p %PASS%
REM
REM These are the normalizations for the disabled algos.  IF you enable them, add them to the PASS field in with the rest.
REM ,keccack=550.0,lyra2v2=37.2,myr-gr=50
REM
ECHO Miner processes started.  Waiting for connections to resolve.
CHOICE /c · /n /t 20 /d ·
REM NOTE: If your machine needs more time to wait for the instances of ccminer to close, modify the above line's value
REM       of '20' to the number of seconds you wish it to wait.
REM
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A01%"') DO IF %%x == %A% SET CURRENT=%A01%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A02%"') DO IF %%x == %A% SET CURRENT=%A02%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A03%"') DO IF %%x == %A% SET CURRENT=%A03%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A04%"') DO IF %%x == %A% SET CURRENT=%A04%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%" /FI "WINDOWTITLE eq %DEV%:%A05%"') DO IF %%x == %C% SET CURRENT=%A05%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%" /FI "WINDOWTITLE eq %DEV%:%A06%"') DO IF %%x == %D% SET CURRENT=%A06%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A07%"') DO IF %%x == %A% SET CURRENT=%A07%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A08%"') DO IF %%x == %A% SET CURRENT=%A08%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A09%"') DO IF %%x == %A% SET CURRENT=%A09%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A10%"') DO IF %%x == %A% SET CURRENT=%A10%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A11%"') DO IF %%x == %A% SET CURRENT=%A11%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A12%"') DO IF %%x == %A% SET CURRENT=%A12%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A13%"') DO IF %%x == %A% SET CURRENT=%A13%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A14%"') DO IF %%x == %A% SET CURRENT=%A14%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A15%"') DO IF %%x == %A% SET CURRENT=%A15%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%" /FI "WINDOWTITLE eq %DEV%:%A16%"') DO IF %%x == %F% SET CURRENT=%A16%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%A17%"') DO IF %%x == %A% SET CURRENT=%A17%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%" /FI "WINDOWTITLE eq %DEV%:%A18%"') DO IF %%x == %B% SET CURRENT=%A18%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%" /FI "WINDOWTITLE eq %DEV%:%A19%"') DO IF %%x == %E% SET CURRENT=%A19%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%" /FI "WINDOWTITLE eq %DEV%:%A20%"') DO IF %%x == %E% SET CURRENT=%A20%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%" /FI "WINDOWTITLE eq %DEV%:%A21%"') DO IF %%x == %F% SET CURRENT=%A21%
REM Algo detection for display purposes only.
REM
ECHO Currently mining: %CURRENT% on device(s): %DEV%
ECHO Total number of algo switches:  %COUNTER%
ECHO Previously mining: %LAST%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %A% ECHO Waiting for %A% to close...
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %B% ECHO Waiting for %B% to close...
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %C% ECHO Waiting for %C% to close...
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %D% ECHO Waiting for %D% to close...
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %E% ECHO Waiting for %E% to close...
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %F% ECHO Waiting for %F% to close...
REM Above checks processes for all instance-names of ccminer, and displays which one is running.
REM
:END1
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %A% goto END1
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %B% goto END1
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %C% goto END1
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %D% goto END1
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %E% goto END1
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%" /FI "WINDOWTITLE eq %DEV%:%CURRENT%"') DO IF %%x == %F% goto END1
REM Checking processes for ccminer, if any version found, start looking again until none is found to continue
REM
SET LAST=%CURRENT%
CLS
GOTO START


JK's nVidia zPool Miner Batch V1.08

An updated version of the "lite" batch file will be added soon to add the new algos, I just need to go through it separately at another time, I ran out of steam today.  It has no algo detection, and just rotates through them all.  The original version can be found  by clicking here (https://bitcointalk.org/index.php?topic=1260863.msg15119470#msg15119470) and you could easily add the algos yourself.

I had issues with this update (thus the long wait) as when I would get a 19th-21st algo added to the batch, stratum wouldn't send disconnects to two other algos on top of the favored one leaving multiple algos mining at once.   I still can't figure out why this is happening, and my only guess at this point is maybe there's something funny with long passwords on the stratums for the algos I have disabled: lyra2v2, keccack, and myr-gr....   very odd... but it's working now as long as the offending algos were disabled.  I haven't tried to disable others and enable these ones... but It starts once the password gets that huge is my best guess (see batch).

I removed the intensity settings from the batch since 90% of you aren't going to be using the miners/terminals and don't need trimmed intensity for usability while mining.

The new base normalization for this batch is an EVGA GTX 1070 FTW DT ACX3 8Gb.

The normalizations I have on hand right now are as follows:
Code:
GTX 750Ti
x17=1.8
nist5=8.5
x11evo=2.7
sib=0.725
x13=2.3
x14=2.14
x15=1.8
x11=2.7
qubit=4.2
lyra2v2=6.2
blakecoin=1.4
blake2s=0.89
neoscrypt=0.155
decred=0.475
skein=73.5
lbry=44.2
c11=2.74
quark=5.0

GTX 980
x17=5.2
nist5=8.0
x11evo=7.7
sib=1.1
x13=6.8
x14=7.0
x15=5.6
x11=8.2
qubit=12.5
lyra2v2=22.0
blakecoin=1.4
blake2s=1.2
neoscrypt=0.651
decred=1.7
skein=293.0
lbry=157.0
c11=8.3
groestl=24.5
quark=11.5

GTX 1070 FTW DT 8G
x17=7.7 ccminer 1.7
nist5=41.9 ccminer 1.8-dev
x11evo=11.8 ccminer 1.8-dev
sib=1.7 ccminer 1.8-dev
x13=10.3 1.5.74-git(SP-MOD)
x14=9.6 ccminer 1.7
x15=8.2 ccminer 1.8.dev
x11=12.1 ccminer 1.8.dev
qubit=18.5 ccminer 1.8.dev
lyra2v2=37.2 ccminer 1.7.6
blakecoin=4.1 ccminer 1.8.dev
blake2s=1.7 ccminer 1.7.6
neoscrypt=0.922 ccminer 1.8.3
decred=2.2
skein=400.0
lbry=270.0
c11=12.74
groestl=37.1
quark=18.4
keccak=550.0 ccminer 1.7.6
myr-gr=55.9 ccminer 1.7

To get to my original batch file post with more info such as how to normalize, links to miner software, and other tidbits including old versions of the batch:  by clicking here (https://bitcointalk.org/index.php?topic=1260863.msg15119470#msg15119470)

The Equihash miner I am using: EWBF zCash Miner (https://bitcointalk.org/index.php?topic=1707546.0)

The current most-used miner app is the ccminerAlexis78 build.  It can be compiled from source, or if you are unable, check out the nemosminer zpool link and download it by itself from his package/github.

Donations not necessary but always welcomed: 1pz4yZ6DAjn4ho7x2FiEqE6VVEvefFxK9


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 21, 2017, 03:39:59 AM
Tote:  Please do not comment this batch file;  leave it out of your quote/replies on this thread to:  save space, and more importantly not confuse people when a new update to the batch is made.   Thanks!

@crackfoo, Id like to get some feedback to make sure the batch is ok before you update your support page with the new batch....  Seems a smart idea.


An updated version of the "lite" batch file will be added soon to add the new algos, I just need to go through it separately at another time, I ran out of steam today.  It has no algo detection, and just rotates through them all.  The original version can be found  by clicking here (https://bitcointalk.org/index.php?topic=1260863.msg15119470#msg15119470) and you could easily add the algos yourself.

I had issues with this update (thus the long wait) as when I would get a 19th-21st algo added to the batch, stratum wouldn't send disconnects to two other algos on top of the favored one leaving multiple algos mining at once.   I still can't figure out why this is happening, and my only guess at this point is maybe there's something funny with long passwords on the stratums for the algos I have disabled: lyra2v2, keccack, and myr-gr....   very odd... but it's working now as long as the offending algos were disabled.  I haven't tried to disable others and enable these ones... but It starts once the password gets that huge is my best guess (see batch).

I removed the intensity settings from the batch since 90% of you aren't going to be using the miners/terminals and don't need trimmed intensity for usability while mining.

The new base normalization for this batch is an EVGA GTX 1070 FTW DT ACX3 8Gb.

The normalizations I have on hand right now are as follows:
Code:
GTX 750Ti
x17=1.8
nist5=8.5
x11evo=2.7
sib=0.725
x13=2.3
x14=2.14
x15=1.8
x11=2.7
qubit=4.2
lyra2v2=6.2
blakecoin=1.4
blake2s=0.89
neoscrypt=0.155
decred=0.475
skein=73.5
lbry=44.2
c11=2.74
quark=5.0

GTX 980
x17=5.2
nist5=8.0
x11evo=7.7
sib=1.1
x13=6.8
x14=7.0
x15=5.6
x11=8.2
qubit=12.5
lyra2v2=22.0
blakecoin=1.4
blake2s=1.2
neoscrypt=0.651
decred=1.7
skein=293.0
lbry=157.0
c11=8.3
groestl=24.5
quark=11.5

GTX 1070 FTW DT 8G
x17=7.7 ccminer 1.7
nist5=41.9 ccminer 1.8-dev
x11evo=11.8 ccminer 1.8-dev
sib=1.7 ccminer 1.8-dev
x13=10.3 1.5.74-git(SP-MOD)
x14=9.6 ccminer 1.7
x15=8.2 ccminer 1.8.dev
x11=12.1 ccminer 1.8.dev
qubit=18.5 ccminer 1.8.dev
lyra2v2=37.2 ccminer 1.7.6
blakecoin=4.1 ccminer 1.8.dev
blake2s=1.7 ccminer 1.7.6
neoscrypt=0.922 ccminer 1.8.3
decred=2.2
skein=400.0
lbry=270.0
c11=12.74
groestl=37.1
quark=18.4
keccak=550.0 ccminer 1.7.6
myr-gr=55.9 ccminer 1.7

To get to my original batch file post with more info such as how to normalize, links to miner software, and other tidbits including old versions of the batch:  by click here (https://bitcointalk.org/index.php?topic=1260863.msg15119470#msg15119470)

If anyone has better luck enabling the other algos and not having it leave multiple instances open, i'd like to hear about it.


I also wanted to note I got this error on the wallet page in the miner summary:
"Fatal error: Call to undefined function yaamp_worker_shares_bad() in /home/zpool/next/web/yaamp/modules/site/results/wallet_miners_results.php on line 100"

It happened after I tested each algo for the 1070 normalization.... wasn't this way about an hour ago.   Ill see if it fixes itself.... I mean, It will probably have a LOT of ghost miners on it possibly just because of the short run times on each algo multiple times. (testing batch, etc)

Thanks a lot. I'll update it when some feedback about it comes in.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 21, 2017, 04:36:10 AM
website error:

Fatal error: Cannot redeclare getAdminSideBarLinks() (previously declared in /home/zpool/next/web/yaamp/core/functions/yaamp.php:526) in /home/zpool/next/web/yaamp/core/functions/admin.php on line 15


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on February 21, 2017, 04:52:17 AM
another one

Fatal error: Call to undefined function yaamp_worker_shares_bad() in /home/zpool/next/web/yaamp/modules/site/results/wallet_miners_results.php on line 100

for sha256 workers.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 21, 2017, 06:15:58 AM


JK's Miner Batch file V 1.08
Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP
SET DEV=
SET ID=i7-920


thankyou this is a amazing script i got tired of having to changed speeds and addys over 10 times for each ago this kills a few birds with one stone. Legend  :  )  

best Regards
nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 21, 2017, 12:27:17 PM
Im working on a version of the batch that I can drop a txt file onto my web url, and I will update that text file with the algo I want my miners to mine...   and the batch will automatically check it every so often and close then start a new one if the batch contents have changed.

I have finished the batch aside from adding the lines for killing the open process of the miner but for some reason im having trouble communicating with my VPN's host PC;  even though im connected to my VPN now......  so no tests tonight.

Ugh.  network woes.

Im sure the ability to control an entire farm remotely;  using only an identical batch file on each miner;  and having the farm be at any site on the web... will be something people will want to be able to do =)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 21, 2017, 01:31:10 PM
So with the current list of algos on zpool, which ones are better for CPU and which ones are better for GPUs?

And what is a good miner EXE for CPU, nvidia, and Radeon?

Looking to create a batch file for each, and I don't want a CPU mining a GPU friendly algo and vice versa.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 21, 2017, 05:09:33 PM
We've now added new algos: timemachine and equihash and a few coins to go along with them.

Consider both as beta as we've yet to officially find blocks but all seems running ok.

If someone can test and confirm that'd be great.

Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 21, 2017, 06:21:50 PM
We've now added new algos: timemachine and equihash and a few coins to go along with them.

Consider both as beta as we've yet to officially find blocks but all seems running ok.

If someone can test and confirm that'd be great.

Cheers!

i noticed equihash high up on the list.  What's a good Windows miner for it?  Is it a CPU or GPU algo?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 21, 2017, 06:39:07 PM
We've now added new algos: timemachine and equihash and a few coins to go along with them.

Consider both as beta as we've yet to officially find blocks but all seems running ok.

If someone can test and confirm that'd be great.

Cheers!

i noticed equihash high up on the list.  What's a good Windows miner for it?  Is it a CPU or GPU algo?

I believe there are GPU miners for it now... here's a windows one:

Zcash with GPU AMD Genoil Miner (Windows):

https://github.com/Genoil/ZECMiner/blob/master/releases/genoil-zec-miner-0.4.1.zip



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 21, 2017, 10:47:12 PM
NEMOSMINER is made up of multiple versions of open source ccminer's including alex78, sp-mod, djm34,  tpruvot please support these devs

this is version 1.5 and has 17 different algorithms enabled (groestl,myr-gr,c11,sib-x11ghost,decred,blakecoin,lbry,lyra2v2,neoscrypt,nist5,skein,x11evo,x13,x14,x15,x17,blake2s,)  

auto switches to the most profitable algo/coin

very easy setup: (big improvements to the script only need to change btc address once now instead of 11 times) :  )

step 1. edit the nemosminerv1.5.bat (change my btcaddress to yours and set the number or cards to use default DEV=0 (1card)  eg: DEV=0,1,2,3,4 (5card rig)

Code:
ADDY=19iNwpkQEtjoDTz4sP5EKMJHvF6smZxqhR
SET DEV=0

step 2. run nemosminerv1.5.bat

this version is setup for the nvidia 1050ti and 1070 but can be easily adjusted to suit other cards just change the speed settings after the -p command. (speed is in mhs except for blake & decred algo's which are ghs)
tested on windows 10 64bit pc with single 1050ti,  and on 1070 x 5 rig running windows 7 64bit

hope this helps some people, i will keep it up to date with new profitable algos and the latest ccminer releases

nemosminer ZPOOL nvidia miner v1.5      https://mega.nz/#F!kA9kwRjb!p5UzpnZ-sYbp7cNYvYQbTw (https://mega.nz/#F!kA9kwRjb!p5UzpnZ-sYbp7cNYvYQbTw)

md5 checksum:  2498e8040b61cd92eb50c6a3f5784a70

this is a free project feel free to donate be much appreciated: 19iNwpkQEtjoDTz4sP5EKMJHvF6smZxqhR  (please support the devs of ccminer with out them no1 would be mining on nvidia gpus)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 22, 2017, 02:03:11 AM
Here it is....

JK's zPool Manual Miner Batch V1.0

Code:
@echo off
:STARTNEWALGO
SETLOCAL EnableExtensions
SET ADDY=1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP
SET DEV=
SET ID=i7-920-GPU
REM NOTE:  ADDY is where you put in your wallet address.  DEV is for device numbers to mine on.  If you have
REM        two video cards, then you will set it as 'SET DEV=-d 0,1' .  If you wish to only use your second
REM        and third video cards, you would use:   'SET DEV=-d 1,2' ... and so on.  ID is just a string to
REM        identify your miner's connection on the wallet page via the password field preview displayed.
REM        leave DEV blank to select all cuda devices. Equihash device selection not implemented yet.
REM
SET ALGOLOC=http://nomadpaintball.tripod.com/currentalgo.txt
SET ALGOFN=currentalgo.txt
REM        ALGOLOC is the URL to the file that has your algo selection.  ALGOFN is the filename itself.
REM        Set them appropriately to your file location and name.
REM
SET A=ccminer180.exe
SET B=ccminerx11e.exe
SET C=ccminerlyra2.exe
SET D=ccminerlbry1.exe
SET E=ccminerlbry.exe
SET F=ccminer.exe
SET G=equihash.exe
REM NOTE:  A,B,C,D,E,F&G are all the miner app file-names.  You should be able to use path:\to\ccminer.exe etc. if
REM        you so desire.  I highly suggest putting a copy of each ccminer version you are using, in one folder
REM        with this naming structure to keep it simple. 'C:\zPool.ca\ccminer.exe' etc...  eliminates path:\to\ fluff.
REM
SET POOL=mine.zpool.ca
SET ALGOLOC=http://nomadpaintball.tripod.com/currentalgo.txt
SET ALGOFN=currentalgo.txt
SET A01=x13
SET A02=x11
SET A03=qubit
SET A04=x15
SET A05=lyra2v2
SET A06=neoscrypt
SET A07=decred
SET A08=blakecoin
SET A09=c11
SET A10=quark
SET A11=groestl
SET A12=blake2s
SET A13=x14
SET A14=x17
SET A15=nist5
SET A16=skein
SET A17=sib
SET A18=x11evo
SET A19=lbry
SET A20=keccak
SET A21=myr-gr
SET A22=equihash
COLOR 0A
SET PASS=%ID%,c=BTC
SET WHATTOMINE=NONE
IF EXIST .\currentalgo.txt DO DEL currentalgo.txt
IF EXIST .\nextalgo.txt DO DEL nextalgo.txt
:TOP1
CLS
ECHO Fetching current algorythm selection...
powershell -version 2.0 -Command "(New-Object Net.WebClient).DownloadFile('%ALGOLOC%', '%ALGOFN%')"
REM        Windows PowerShell 2.0 or greater is needed to be able to access the web and download a file from the command interpreter.
REM
IF EXIST .\currentalgo.txt SET /P WHATTOMINE=<currentalgo.txt
IF %WHATTOMINE% == NONE ECHO Web connection unavailable.  Retry in 5 seconds...
IF %WHATTOMINE% == NONE CHOICE /c · /n /t 5 /d ·
IF %WHATTOMINE% == NONE GOTO TOP1
ECHO %WHATTOMINE% selected.
SET /A NEXTALGO=%WHATTOMINE%
IF %WHATTOMINE% == %A01% START "%DEV%:%A01%" /min %A% %DEV% -r 0 -a %A01% -o stratum+tcp://%A01%.%POOL%:3633 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A02% START "%DEV%:%A02%" /min %A% %DEV% -r 0 -a %A02% -o stratum+tcp://%A02%.%POOL%:3533 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A03% START "%DEV%:%A03%" /min %A% %DEV% -r 0 -a %A03% -o stratum+tcp://%A03%.%POOL%:4733 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A04% START "%DEV%:%A04%" /min %A% %DEV% -r 0 -a %A04% -o stratum+tcp://%A04%.%POOL%:3733 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A05% START "%DEV%:%A05%" /min %C% %DEV% -r 0 -a %A05% -o stratum+tcp://%A05%.%POOL%:4533 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A06% START "%DEV%:%A06%" /min %D% %DEV% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A07% START "%DEV%:%A07%" /min %A% %DEV% -r 0 -a %A07% -o stratum+tcp://%A07%.%POOL%:5744 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A08% START "%DEV%:%A08%" /min %A% %DEV% -r 0 -a %A08% -o stratum+tcp://%A08%.%POOL%:5743 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A09% START "%DEV%:%A09%" /min %A% %DEV% -r 0 -a %A09% -o stratum+tcp://%A09%.%POOL%:3573 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A10% START "%DEV%:%A10%" /min %A% %DEV% -r 0 -a %A10% -o stratum+tcp://%A10%.%POOL%:4033 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A11% START "%DEV%:%A11%" /min %A% %DEV% -r 0 -a %A11% -o stratum+tcp://%A11%.%POOL%:5333 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A12% START "%DEV%:%A12%" /min %A% %DEV% -r 0 -a %A12% -o stratum+tcp://%A12%.%POOL%:5766 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A13% START "%DEV%:%A13%" /min %A% %DEV% -r 0 -a %A13% -o stratum+tcp://%A13%.%POOL%:3933 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A14% START "%DEV%:%A14%" /min %A% %DEV% -r 0 -a %A14% -o stratum+tcp://%A14%.%POOL%:3737 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A15% START "%DEV%:%A15%" /min %A% %DEV% -r 0 -a %A15% -o stratum+tcp://%A15%.%POOL%:3833 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A16% START "%DEV%:%A16%" /min %F% %DEV% -r 0 -a %A16% -o stratum+tcp://%A16%.%POOL%:4933 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A17% START "%DEV%:%A17%" /min %A% %DEV% -r 0 -a %A17% -o stratum+tcp://%A17%.%POOL%:5033 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A18% START "%DEV%:%A18%" /min %B% %DEV% -r 0 -a %A18% -o stratum+tcp://%A18%.%POOL%:3553 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A19% START "%DEV%:%A19%" /min %E% %DEV% -r 0 -a %A19% -o stratum+tcp://%A19%.%POOL%:3334 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A20% START "%DEV%:%A20%" /min %E% %DEV% -r 0 -a %A20% -o stratum+tcp://%A20%.%POOL%:5133 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A21% START "%DEV%:%A21%" /min %F% %DEV% -r 0 -a %A21% -o stratum+tcp://%A21%.%POOL%:5433 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A22% START "%DEV%:%A22%" /min %G% --server %POOL% --user %ADDY% --pass %PASS%,%WHATTOMINE%,stats --port 2142 --eexit 3
:WAITAGAIN
CLS
ECHO Miner loaded and mining %WHATTOMINE%.  Waiting for algo change or miner app to close.
SET ISRUNNING=FALSE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %A% SET ISRUNNING=TRUE
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %B% SET ISRUNNING=TRUE
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %C% SET ISRUNNING=TRUE
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %D% SET ISRUNNING=TRUE
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %E% SET ISRUNNING=TRUE
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %F% SET ISRUNNING=TRUE
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %G%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %G% SET ISRUNNING=TRUE
IF %ISRUNNING% == FALSE GOTO RESTART
:TRUE
CHOICE /c · /n /t 20 /d ·
REM        Check URL every x minutes for an algo selection change (60s x 5Min == 300), etc.
REM
powershell -Command "(New-Object Net.WebClient).DownloadFile('%ALGOLOC%', 'nextalgo.txt')"
IF EXIST .\nextalgo.txt SET /P NEXTALGO=<nextalgo.txt
IF %NEXTALGO% == %WHATTOMINE% ECHO No change detected.  Still mining %WHATTOMINE%
IF %ISRUNNING% == FALSE GOTO RESTART
CHOICE /c · /n /t 2 /d ·
IF %NEXTALGO% == %WHATTOMINE% GOTO WAITAGAIN
:RESTART
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%"') DO IF %%x == %A% TASKKILL /F /IM %A%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%"') DO IF %%x == %B% TASKKILL /F /IM %B%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%"') DO IF %%x == %C% TASKKILL /F /IM %C%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%"') DO IF %%x == %D% TASKKILL /F /IM %D%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%"') DO IF %%x == %E% TASKKILL /F /IM %E%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%"') DO IF %%x == %F% TASKKILL /F /IM %F%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %G%"') DO IF %%x == %G% TASKKILL /F /IM %G%
SET /P WHATTOMINE=<nextalgo.txt
GOTO STARTNEWALGO

JK's nVidia zPool Miner "Manual" Batch V1.0


Update: Updated to 1.0.  Tested and functions well.  No major changes since V0.9 Beta;  just beautification and cleaning up the mess.

This batch REQUIRES Windows Powershell >= 2.0. But luckily that covers PC's from Vista and later.  99% of users will not need to install or download anything extra.

Simple.  Same as my original batch instructions, but as well you must enter the URL and filename of where you will be uploading a text file containing the name of the algo you wish your miner to mine.   If the batch can't get on the internet, you will see a huge red error.  It will continue to retry every so many seconds.

My example is just a txt file on a tripod website.  All I do is change the algo name in the text file (that only contains the algo name in it) and the miner will automatically check it and change the app as needed.  If it detects no miner running, it will restart it's whole process.  You can also visit the url and see the text file I am currently using.

I have not tested this fully for longer than a few min.... but AFAIK, it should work fine.  I tested it.  It works great.  I have all of my farms running this batch now.

Please report any issues you may have.  And I'm looking for feedback and suggestions.

I bet you guys didn't think a batch can do this.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 22, 2017, 02:04:55 AM
Here it is....

JK's zPool Remote Miner V0.8  Alpha

.....

This batch REQUIRES Windows Powershell >= 2.0.

Simple.  Enter URL and filename of where you will be uploading your miner selection.

Mine is just a txt file on a tripod website.  All I do is change the algo name in the text file (that only contains the algo name in it) and the miner will automatically check it and change the app as needed.

I have not tested this fully for longer than a few min.... but AFAIK, it should work fine.

Please report any issues you may have.

I bet you guys didnt think a batch can do this.

fantastic, thanks a lot!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 22, 2017, 02:46:54 AM
Here it is....

JK's zPool Remote Miner V0.8  Alpha


fantastic, thanks a lot!

No prob.  Thisis something I have been wanting to have for a LONG time.   No need to log into a miner to swutch algo....  Cause in my instance, I have many machines at many locations, and when a profitability spike happens, i want to be able to take advantage manually.


Next i'll try to mix this with the regular batch and make it so you can select "auto" on the web file.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 22, 2017, 03:38:07 AM
We've now added new algos: timemachine and equihash and a few coins to go along with them.

Consider both as beta as we've yet to officially find blocks but all seems running ok.

If someone can test and confirm that'd be great.

Cheers!

i noticed equihash high up on the list.  What's a good Windows miner for it?  Is it a CPU or GPU algo?

I believe there are GPU miners for it now... here's a windows one:

Zcash with GPU AMD Genoil Miner (Windows):

https://github.com/Genoil/ZECMiner/blob/master/releases/genoil-zec-miner-0.4.1.zip



Thanks, but it doesn't seem to be working for me.  I'm getting 0.0S/s for some reason.  I'm using a R9 280x.  -P 1 (-P 0 does not work).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 22, 2017, 05:12:06 AM
This is the equihash miner I am using with my Nvidia cards: EWBF ZCash miner (https://bitcointalk.org/index.php?topic=1707546.0)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 22, 2017, 07:36:18 AM
This is the equihash miner I am using with my Nvidia cards: EWBF ZCash miner (https://bitcointalk.org/index.php?topic=1707546.0)

look correct?? 1050ti OC having trouble measuring equihash 1 sol/s = 1 hash/s 172sols = 0.0172 mhs ??

equihash=0.0172,sib=4.53,blakecoin=1.78,lbry=106,lyra2v2=13.3,neoscrypt=0.45,decred=1.03,nist5=16.34,x11evo=5.02,x17=3.56,blake2s=1.55,skein=203  ??

Regards
Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 22, 2017, 07:53:00 AM
This is the equihash miner I am using with my Nvidia cards: EWBF ZCash miner (https://bitcointalk.org/index.php?topic=1707546.0)

look correct?? 1050ti OC having trouble measuring equihash 1 sol/s = 1 hash/s 172sols = 0.0172 mhs ??

equihash=0.0172,sib=4.53,blakecoin=1.78,lbry=106,lyra2v2=13.3,neoscrypt=0.45,decred=1.03,nist5=16.34,x11evo=5.02,x17=3.56,blake2s=1.55,skein=203  ??

Regards
Nemo

Enter it in a term of kSol/sec.... so 1Ksol/sec would be 1.00, 300Sol/sec would 0.300...  Assuming your normalizations are the actual hashrates as I do.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 22, 2017, 07:55:57 AM
This is the equihash miner I am using with my Nvidia cards: EWBF ZCash miner (https://bitcointalk.org/index.php?topic=1707546.0)

look correct?? 1050ti OC having trouble measuring equihash 1 sol/s = 1 hash/s 172sols = 0.0172 mhs ??

equihash=0.0172,sib=4.53,blakecoin=1.78,lbry=106,lyra2v2=13.3,neoscrypt=0.45,decred=1.03,nist5=16.34,x11evo=5.02,x17=3.56,blake2s=1.55,skein=203  ??

Regards
Nemo

Enter it in a term of kSol/sec.... so 1Ksol/sec would be 1.00, 300Sol/sec would 0.300...  Assuming your normalizations are the actual hashrates as I do.

thank you much appreciated


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 22, 2017, 08:58:03 AM
Here it is....

JK's zPool Remote Miner V0.9  Beta Click Here (https://bitcointalk.org/index.php?topic=1751272.msg17933099#msg17933099)


I've updated and finally fully tested the batch.  Seems to work pretty well.

Open to suggestions for improvements.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 22, 2017, 09:44:02 AM
nemosminer 1.5.1   added equihash support thanks to : EWBF's CUDA Zcash miner Version 0.3.0b.

https://bitcointalk.org/index.php?topic=1777336.0 (https://bitcointalk.org/index.php?topic=1777336.0)

1050ti=175-200sols
1070=425-475sols

hope this helps : )
Regards
Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: m1n1ngP4d4w4n on February 22, 2017, 09:53:14 AM
Here it is....

JK's zPool Remote Miner V0.9  Beta

Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP
SET DEV=
SET ID=i7-920-GPU
REM NOTE:  ADDY is where you put in your wallet address.  DEV is for device numbers to mine on.  If you have
REM        two video cards, then you will set it as 'SET DEV=-d 0,1' .  If you wish to only use your second
REM        and third video cards, you would use:   'SET DEV=-d 1,2' ... and so on.  ID is just a string to
REM        identify your miner's connection on the wallet page via the password field preview displayed.
REM        leave DEV blank to select all cuda devices.
REM
SET A=ccminer180.exe
SET B=ccminerx11e.exe
SET C=ccminerlyra2.exe
SET D=ccminerlbry1.exe
SET E=ccminerlbry.exe
SET F=ccminer.exe
SET G=equihash.exe
REM NOTE:  A,B,C,D,E&F are all the ccminer file-names.  You should be able to use path:\to\ccminer.exe if you
REM        so desire.  I highly suggest putting a copy of each ccminer version you are using, in one folder
REM        with this naming structure to keep it simple. 'C:\zPool.ca\ccminer.exe' etc...
REM
SET POOL=mine.zpool.ca
SET ALGOLOC=http://nomadpaintball.tripod.com/currentalgo.txt
SET ALGOFN=currentalgo.txt
SET A01=x13
SET A02=x11
SET A03=qubit
SET A04=x15
SET A05=lyra2v2
SET A06=neoscrypt
SET A07=decred
SET A08=blakecoin
SET A09=c11
SET A10=quark
SET A11=groestl
SET A12=blake2s
SET A13=x14
SET A14=x17
SET A15=nist5
SET A16=skein
SET A17=sib
SET A18=x11evo
SET A19=lbry
SET A20=keccak
SET A21=myr-gr
SET A22=equihash
COLOR 0A
SET PASS=%ID%,c=BTC
SET WHATTOMINE=NONE
IF EXIST .\currentalgo.txt DO DEL currentalgo.txt
IF EXIST .\nextalgo.txt DO DEL nextalgo.txt
:TOP1
CLS
ECHO Fetching current algorythm selection...
powershell -version 2.0 -Command "(New-Object Net.WebClient).DownloadFile('%ALGOLOC%', '%ALGOFN%')"
REM        Windows PowerShell 2.0 or greater is needed to be able to access the web and download a file from the command interpreter.
REM
IF EXIST .\currentalgo.txt SET /P WHATTOMINE=<currentalgo.txt
IF %WHATTOMINE% == NONE ECHO Web connection unavailable.  Retry in 5 seconds...
IF %WHATTOMINE% == NONE CHOICE /c · /n /t 5 /d ·
IF %WHATTOMINE% == NONE GOTO TOP1
ECHO %WHATTOMINE% selected.
SET /A NEXTALGO=%WHATTOMINE%
:STARTNEWALGO
IF %WHATTOMINE% == %A01% START "%DEV%:%A01%" /min %A% %DEV% -r 0 -a %A01% -o stratum+tcp://%A01%.%POOL%:3633 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A02% START "%DEV%:%A02%" /min %A% %DEV% -r 0 -a %A02% -o stratum+tcp://%A02%.%POOL%:3533 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A03% START "%DEV%:%A03%" /min %A% %DEV% -r 0 -a %A03% -o stratum+tcp://%A03%.%POOL%:4733 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A04% START "%DEV%:%A04%" /min %A% %DEV% -r 0 -a %A04% -o stratum+tcp://%A04%.%POOL%:3733 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A05% START "%DEV%:%A05%" /min %C% %DEV% -r 0 -a %A05% -o stratum+tcp://%A05%.%POOL%:4533 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A06% START "%DEV%:%A06%" /min %D% %DEV% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A07% START "%DEV%:%A07%" /min %A% %DEV% -r 0 -a %A07% -o stratum+tcp://%A07%.%POOL%:5744 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A08% START "%DEV%:%A08%" /min %A% %DEV% -r 0 -a %A08% -o stratum+tcp://%A08%.%POOL%:5743 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A09% START "%DEV%:%A09%" /min %A% %DEV% -r 0 -a %A09% -o stratum+tcp://%A09%.%POOL%:3573 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A10% START "%DEV%:%A10%" /min %A% %DEV% -r 0 -a %A10% -o stratum+tcp://%A10%.%POOL%:4033 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A11% START "%DEV%:%A11%" /min %A% %DEV% -r 0 -a %A11% -o stratum+tcp://%A11%.%POOL%:5333 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A12% START "%DEV%:%A12%" /min %A% %DEV% -r 0 -a %A12% -o stratum+tcp://%A12%.%POOL%:5766 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A13% START "%DEV%:%A13%" /min %A% %DEV% -r 0 -a %A13% -o stratum+tcp://%A13%.%POOL%:3933 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A14% START "%DEV%:%A14%" /min %A% %DEV% -r 0 -a %A14% -o stratum+tcp://%A14%.%POOL%:3737 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A15% START "%DEV%:%A15%" /min %A% %DEV% -r 0 -a %A15% -o stratum+tcp://%A15%.%POOL%:3833 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A16% START "%DEV%:%A16%" /min %F% %DEV% -r 0 -a %A16% -o stratum+tcp://%A16%.%POOL%:4933 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A17% START "%DEV%:%A17%" /min %A% %DEV% -r 0 -a %A17% -o stratum+tcp://%A17%.%POOL%:5033 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A18% START "%DEV%:%A18%" /min %B% %DEV% -r 0 -a %A18% -o stratum+tcp://%A18%.%POOL%:3553 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A19% START "%DEV%:%A19%" /min %E% %DEV% -r 0 -a %A19% -o stratum+tcp://%A19%.%POOL%:3334 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A20% START "%DEV%:%A20%" /min %E% %DEV% -r 0 -a %A20% -o stratum+tcp://%A20%.%POOL%:5133 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A21% START "%DEV%:%A21%" /min %F% %DEV% -r 0 -a %A21% -o stratum+tcp://%A21%.%POOL%:5433 -u %ADDY% -p %PASS%,%WHATTOMINE%,stats
IF %WHATTOMINE% == %A22% START "%DEV%:%A22%" /min %G% --server %POOL% --user %ADDY% --pass %PASS%,%WHATTOMINE%,stats --port 2142
ECHO Miner loaded and mining %WHATTOMINE%.  Waiting for algo change or miner app to close.
:WAITAGAIN
SET ISRUNNING=FALSE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %A% SET ISRUNNING=TRUE
echo %A% : %ISRUNNING%
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %B% SET ISRUNNING=TRUE
echo %B% : %ISRUNNING%
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %C% SET ISRUNNING=TRUE
echo %C% : %ISRUNNING%
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %D% SET ISRUNNING=TRUE
echo %D% : %ISRUNNING%
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %E% SET ISRUNNING=TRUE
echo %E% : %ISRUNNING%
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %F% SET ISRUNNING=TRUE
echo %F% : %ISRUNNING%
IF %ISRUNNING% == TRUE GOTO TRUE
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %G%" /FI "WINDOWTITLE eq %DEV%:%WHATTOMINE%"') DO IF %%x == %G% SET ISRUNNING=TRUE
echo %G% : %ISRUNNING%
IF %ISRUNNING% == FALSE GOTO RESTART
:TRUE
CHOICE /c · /n /t 20 /d ·
REM        Check URL every x minutes for an algo selection change (60s x 5Min == 300), etc.
REM
powershell -Command "(New-Object Net.WebClient).DownloadFile('%ALGOLOC%', 'nextalgo.txt')"
IF EXIST .\nextalgo.txt SET /P NEXTALGO=<nextalgo.txt
IF %NEXTALGO% == %WHATTOMINE% ECHO No change detected.  Still mining %WHATTOMINE%
IF %ISRUNNING% == FALSE GOTO RESTART
IF %NEXTALGO% == %WHATTOMINE% GOTO WAITAGAIN
:RESTART
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %A%"') DO IF %%x == %A% TASKKILL /F /IM %A%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %B%"') DO IF %%x == %B% TASKKILL /F /IM %B%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %C%"') DO IF %%x == %C% TASKKILL /F /IM %C%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %D%"') DO IF %%x == %D% TASKKILL /F /IM %D%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %E%"') DO IF %%x == %E% TASKKILL /F /IM %E%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %F%"') DO IF %%x == %F% TASKKILL /F /IM %F%
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %G%"') DO IF %%x == %G% TASKKILL /F /IM %G%
SET /P WHATTOMINE=<nextalgo.txt
GOTO STARTNEWALGO

JK's nVidia zPool Miner "Manual" Batch V0.9


Update: Updated to 0.9 Beta.  Tested and functions well.  Waiting for feedback.

This batch REQUIRES Windows Powershell >= 2.0.

Simple.  Enter URL and filename of where you will be uploading your miner selection.

Mine is just a txt file on a tripod website.  All I do is change the algo name in the text file (that only contains the algo name in it) and the miner will automatically check it and change the app as needed.

I have not tested this fully for longer than a few min.... but AFAIK, it should work fine.

Please report any issues you may have.

I bet you guys didnt think a batch can do this.

I had script doing what you do exactly but your version is more slick (less steps) & smarter, nice ideas over here, good work.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 22, 2017, 01:00:50 PM
@crackfoo does the equihash port send disconnects like the rest of the stratum ports?

Im wondering if equihash can be used in with the pool controlled algo switches via the password field.....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 22, 2017, 01:38:36 PM
@crackfoo does the equihash port send disconnects like the rest of the stratum ports?

Im wondering if equihash can be used in with the pool controlled algo switches via the password field.....

It should, just like the others AFAIK.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 22, 2017, 02:50:44 PM
We've now added new algos: timemachine and equihash and a few coins to go along with them.

Consider both as beta as we've yet to officially find blocks but all seems running ok.

If someone can test and confirm that'd be great.

Cheers!

Just a note on this, please do not use ZDASH, ZEC or ZCL addresses for payouts yet. Well you can, but there still needs work done to be able to send properly due to the convoluted nature of the accounting and sending functions these coins have.

If you are using them, you'll eventually get paid once those get sorted out.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 22, 2017, 08:57:03 PM
nemosminer ZPOOL nvidia miner v1.5.2.1     https://mega.nz/#F!EZVUGSaD!XCY00Yz6oiJzpF26t_bwMQ (https://mega.nz/#F!EZVUGSaD!XCY00Yz6oiJzpF26t_bwMQ)  released (bug fix's to prevent equihash miner from hanging, it now switches like it should sorry about 1.5.1 i pushed it out a bit early not enough testing..

Regards
#Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 22, 2017, 10:49:40 PM
Is there a single good Radeon miner for all of the GPU algos here?  Also, in the future, I may upgrade to an 1080Ti (whenver that comes out), so let me know if there's a equally good single CUDA miner for all of the GPU algos here as well.

Thanks.

Right now, the CPU miner I'm using is this:
https://bitcointalk.org/index.php?topic=1326803.0

I'm using the latest ( 3.5.8 ), although the previous versions were also good.  Seems to cover most of the CPU algos here.

I'll eventually write a guide to show what algos are CPU, GPU, and the miners that work for them if I can gather all the info, but right now I'm still in the research stage (and only mining one GPU algo).

BTW, what happened to the yescrypt profitability?  It dropped big time!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 22, 2017, 11:29:38 PM
any chance of adding Pascal algo, hope im not asking to much : )

Regards
#Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 23, 2017, 12:47:44 AM
any chance of adding Pascal algo, hope im not asking to much : )

Regards
#Nemo

The RPC is not compatible...

https://github.com/tpruvot/yiimp/issues/80


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 23, 2017, 12:55:27 AM
Going through the Benchmark list on the website, I've split up the algos for GPU/CPU:

Code:
CPU:
m7m
xevan
yescrypt


GPU:
blake2s
blakecoin
c11
decred
groestl
keccak
lbry
lyra2v2
myr-gr
neoscrypt
nist5
quark
qubit
scrypt
slb
skein
veltor
x11
x11evo
x13
x14
x15
x17


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 23, 2017, 01:03:08 AM
.....

BTW, what happened to the yescrypt profitability?  It dropped big time!

I should have mentioned, with the big update and merging of the equihash compatibility, I'm no longer adjusting/normalizing the algo one way (AMD) or the other (NVIDIA) since depending on the card type you have, it's not accurate anyway. So now everything is defaulted to 1 and you should adjust that accordingly based off the card you are using.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 23, 2017, 01:41:49 AM
.....

BTW, what happened to the yescrypt profitability?  It dropped big time!

I should have mentioned, with the big update and merging of the equihash compatibility, I'm no longer adjusting/normalizing the algo one way (AMD) or the other (NVIDIA) since depending on the card type you have, it's not accurate anyway. So now everything is defaulted to 1 and you should adjust that accordingly based off the card you are using.

alguds sorted


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 23, 2017, 07:29:47 AM
Zcoin Lyra2z ?? 


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 23, 2017, 12:16:25 PM
Zcoin Lyra2z ?? 

I can but not sure how long it will stay.... isn't the algo changing?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xiaolin1579 on February 23, 2017, 01:12:33 PM
Zcoin Lyra2z ?? 

I can but not sure how long it will stay.... isn't the algo changing?

Around the end of March.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 23, 2017, 01:34:51 PM
Zcoin Lyra2z ?? 

I can but not sure how long it will stay.... isn't the algo changing?

Around the end of March.

Well, I added it now.

Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 23, 2017, 03:58:16 PM
I'm still not having any luck on getting equihash working.  Doesn't seem like there is a CPU or Radeon-based miner for it, just nvidia.

Also, when -p still has "argon2" in it (ex: -p m7m,xevan,yescrypt,argon2), my script keeps looping.  I fixed many the script on a few of the PCs I have access to, but won't be able to get to the others for a while.  Is there anything that can be done short of fixing the script?

[2017-02-23 09:51:33] Starting Stratum on stratum+tcp://mine.zpool.ca:3739
[2017-02-23 09:51:33] 8 miner threads started, using 'xevan' algorithm.
[2017-02-23 09:51:33] stratum_recv_line failed
[2017-02-23 09:51:33] ...terminating workio thread
[2017-02-23 09:51:33] workio thread dead, exiting.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 23, 2017, 04:08:47 PM
I'm still not having any luck on getting equihash working.  Doesn't seem like there is a CPU or Radeon-based miner for it, just nvidia.

Also, when -p still has "argon2" in it (ex: -p m7m,xevan,yescrypt,argon2), my script keeps looping.  I fixed many the script on a few of the PCs I have access to, but won't be able to get to the others for a while.  Is there anything that can be done short of fixing the script?

[2017-02-23 09:51:33] Starting Stratum on stratum+tcp://mine.zpool.ca:3739
[2017-02-23 09:51:33] 8 miner threads started, using 'xevan' algorithm.
[2017-02-23 09:51:33] stratum_recv_line failed
[2017-02-23 09:51:33] ...terminating workio thread
[2017-02-23 09:51:33] workio thread dead, exiting.

unfortunately, I don't think there is anything I can do on this side... I've removed all argon2 stuff, so the thing that's triggering it trying to go there now, is the argument in the password string :\

can't connect to xevan either????

Dont' see any issue from this side...

I'm going to test a CPU miner on equihash shortly, just downloading the bits and setting it up now


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 23, 2017, 05:00:02 PM
hrmm not much luck with CPU for me either....

Setting log level to 2
[12:58:00][0x00000ec8] Using SSE2: YES
[12:58:00][0x00000ec8] Using AVX: YES
[12:58:00][0x00000ec8] Using AVX2: YES
[12:58:00][0x00000ad8] stratum | Starting miner
[12:58:00][0x00000ad8] stratum | Connecting to stratum server 149.56.122.79:2142

[12:58:04][0x00000ad8] stratum | Connected!
[12:58:06][0x00000ad8] stratum | Subscribed to stratum server
[12:58:06][0x00000ad8] miner | Extranonce is 810011a9
[12:58:08][0x00000ad8] stratum | Authorized worker ..........
[12:58:11][0x00000ad8] stratum | Target set to 0001fffe0000000000000000000000000
0000000000000000000000000000000
[12:58:11][0x00000ad8] stratum | Received new job #20f4
[12:58:16][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:26][0x00000ad8] stratum | Received new job #20f6
[12:58:35][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:46][0x00000ad8] stratum | Received new job #20fb
[12:58:52][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:59:08][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 24, 2017, 02:56:30 AM
hrmm not much luck with CPU for me either....

Setting log level to 2
[12:58:00][0x00000ec8] Using SSE2: YES
[12:58:00][0x00000ec8] Using AVX: YES
[12:58:00][0x00000ec8] Using AVX2: YES
[12:58:00][0x00000ad8] stratum | Starting miner
[12:58:00][0x00000ad8] stratum | Connecting to stratum server 149.56.122.79:2142

[12:58:04][0x00000ad8] stratum | Connected!
[12:58:06][0x00000ad8] stratum | Subscribed to stratum server
[12:58:06][0x00000ad8] miner | Extranonce is 810011a9
[12:58:08][0x00000ad8] stratum | Authorized worker ..........
[12:58:11][0x00000ad8] stratum | Target set to 0001fffe0000000000000000000000000
0000000000000000000000000000000
[12:58:11][0x00000ad8] stratum | Received new job #20f4
[12:58:16][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:26][0x00000ad8] stratum | Received new job #20f6
[12:58:35][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:46][0x00000ad8] stratum | Received new job #20fb
[12:58:52][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:59:08][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s


Is job time < hash time to good result???


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 24, 2017, 07:23:57 AM
hrmm not much luck with CPU for me either....

Setting log level to 2
[12:58:00][0x00000ec8] Using SSE2: YES
[12:58:00][0x00000ec8] Using AVX: YES
[12:58:00][0x00000ec8] Using AVX2: YES
[12:58:00][0x00000ad8] stratum | Starting miner
[12:58:00][0x00000ad8] stratum | Connecting to stratum server 149.56.122.79:2142

[12:58:04][0x00000ad8] stratum | Connected!
[12:58:06][0x00000ad8] stratum | Subscribed to stratum server
[12:58:06][0x00000ad8] miner | Extranonce is 810011a9
[12:58:08][0x00000ad8] stratum | Authorized worker ..........
[12:58:11][0x00000ad8] stratum | Target set to 0001fffe0000000000000000000000000
0000000000000000000000000000000
[12:58:11][0x00000ad8] stratum | Received new job #20f4
[12:58:16][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:26][0x00000ad8] stratum | Received new job #20f6
[12:58:35][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:46][0x00000ad8] stratum | Received new job #20fb
[12:58:52][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:59:08][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s


This worked for me:
https://github.com/nicehash/nheqminer/releases

Downloaded the Win64 version.  I can't get the GPU to work (I have a Radeon 280x), but the CPU works fine.

Here's what I use for the command:
nheqminer -l mine.zpool.ca:2142 -u [BITCOIN ADDRESS] -p equihash -t 8

I have a i7-4770K so I configured -t (threads) to 8.

This miner does not disconnect when the profitability changes like how cpuminer does, so I could not incorporate it in my CPU mining script.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 24, 2017, 02:27:53 PM
hrmm not much luck with CPU for me either....

Setting log level to 2
[12:58:00][0x00000ec8] Using SSE2: YES
[12:58:00][0x00000ec8] Using AVX: YES
[12:58:00][0x00000ec8] Using AVX2: YES
[12:58:00][0x00000ad8] stratum | Starting miner
[12:58:00][0x00000ad8] stratum | Connecting to stratum server 149.56.122.79:2142

[12:58:04][0x00000ad8] stratum | Connected!
[12:58:06][0x00000ad8] stratum | Subscribed to stratum server
[12:58:06][0x00000ad8] miner | Extranonce is 810011a9
[12:58:08][0x00000ad8] stratum | Authorized worker ..........
[12:58:11][0x00000ad8] stratum | Target set to 0001fffe0000000000000000000000000
0000000000000000000000000000000
[12:58:11][0x00000ad8] stratum | Received new job #20f4
[12:58:16][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:26][0x00000ad8] stratum | Received new job #20f6
[12:58:35][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:58:46][0x00000ad8] stratum | Received new job #20fb
[12:58:52][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s
[12:59:08][0x00000ec8] Speed [15 sec]: 0 I/s, 0 Sols/s


This worked for me:
https://github.com/nicehash/nheqminer/releases

Downloaded the Win64 version.  I can't get the GPU to work (I have a Radeon 280x), but the CPU works fine.

Here's what I use for the command:
nheqminer -l mine.zpool.ca:2142 -u [BITCOIN ADDRESS] -p equihash -t 8

I have a i7-4770K so I configured -t (threads) to 8.

This miner does not disconnect when the profitability changes like how cpuminer does, so I could not incorporate it in my CPU mining script.

ahh I didn't add -t 8

yeah I have an i7-6820HQ, putting it to use now :)

should it be saying... yaaaay! when it finds submits shares.... not seeing any yet... but lists speed @~24 Sol/s


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 24, 2017, 11:18:35 PM
For those who have balancing owing for  for zdash or zcl there have been changes done and hoping payouts will go out during the next run, in ~1h.

Still watching and testing though.

Cheers



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on February 25, 2017, 04:43:19 AM
any one have any luck running equihashminer (GPU) on zpool ??


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 25, 2017, 09:49:07 AM
any one have any luck running equihashminer (GPU) on zpool ??

see my previous reply. (nvidia)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 25, 2017, 01:04:42 PM
For those who have balancing owing for  for zdash or zcl there have been changes done and hoping payouts will go out during the next run, in ~1h.

Still watching and testing though.

Cheers



Still needs some work. Will try again later today.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 25, 2017, 03:22:09 PM
any one have any luck running equihashminer (GPU) on zpool ??

I'm using Claymore's ZCash AMD GPU Miner:
https://bitcointalk.org/index.php?topic=1670733.0

I have a Radeon 280x and getting 290 S/s

Here's the command I use:
ZecMiner64.exe -allpools 1 -zpool mine.zpool.ca:2142 -zwal 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu -zpsw equihash

However, it does not exit/close when the profitability changes like cpuminer.  So far cpuminer is the only one that behaves properly with your pool when profitability changes (exits out so the next line in the batch file is executed).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 26, 2017, 12:47:14 AM
Looks like payouts for zcl and zdash are now working.

Any problems let me know.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on February 26, 2017, 09:27:42 AM
any one have any luck running equihashminer (GPU) on zpool ??

I'm using Claymore's ZCash AMD GPU Miner:
https://bitcointalk.org/index.php?topic=1670733.0

I have a Radeon 280x and getting 290 S/s

Here's the command I use:
ZecMiner64.exe -allpools 1 -zpool mine.zpool.ca:2142 -zwal 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu -zpsw equihash

However, it does not exit/close when the profitability changes like cpuminer.  So far cpuminer is the only one that behaves properly with your pool when profitability changes (exits out so the next line in the batch file is executed).

I downloaded that miner;  looked at the readme, and it doesn't have a function to close app (not return) on stratum disconnect.

Sadly that specific miner app will not be able to utilize the stratum disconnect feature for auto profit switching.


With the nvidia one I mentioned several replies ago;  it has a flag you can set...


On another note, I finalized the initial version of my manual batch and updated the post.  It can be found via the link on my sig.  V1.0.

It has been working really well for me.  Its soooooo nice to be able to control farms without remote logging into each system to change stuff.   Such a long arduous process.   I know there are miner control apps out there;  but again... I like low overhead.   I am only using powershell to do my http request.   Which;  is pretty low-level in many respects.

I also manage miners for friends who know nothing about the semantics of mining, and I used to host his S7 at my house....   so I just keep a separate text file that I can control his rigs we are setting up over the next month.   Id have them on my file;  but if I do a profitability test, I can just pull one of my rigs out of the mix, and test profitability, or my whole farm.... without affecting his.

The real PITA in batch files is the IF/ELSE scenario.   It adds soo much bloat.  Being recursive is tough sometimes.

I have been trying to wrap my head around a way to make the batch retrieve commands, or at least a batch file to download and run;  and that new batch itself could update the miner software (download strategically placed files on the web), close the current running batch (it will have been launched in its own memory space like I do ccminer), delete old batch file, rename newly downloaded/updated batch file it got at the same time as any miner updated... and then launch the new miner batch.
I think I know how im gonna do it.  Just need to write a template batch file for the update process (the batch that the miner batch downloads, and it will actually be dowin the main downloading/updating).

Completely transparent operation..... yet the ability to update itself....

I remember writing menu systems and such for my old 8088 when I was a LOT younger.. this brings back memories.  I still have my Amstrad tucked away in my parents attic.....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 28, 2017, 01:18:29 AM
Any reason why we're seeing a lot of rejects?  This is going on for multiple algos.

I see a lot for xevan, m7m, equihash, and yescrypt.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 28, 2017, 02:19:30 PM
m7m is rejecting everything right now.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 28, 2017, 02:33:37 PM
m7m is rejecting everything right now.

yeah, seems the wallet is stuck on a block. re-syncing now...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on February 28, 2017, 02:46:20 PM
m7m is rejecting everything right now.

yeah, seems the wallet is stuck on a block. re-syncing now...

Thanks.  I see you took m7m out of the pool for now, but my miners are still trying to mine m7m.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on February 28, 2017, 06:00:40 PM
There are 4 different KMD coins on the pool:

http://www.zpool.ca/site/block?id=1720
http://www.zpool.ca/site/block?id=1721
http://www.zpool.ca/site/block?id=1730
http://www.zpool.ca/site/block?id=1902

I have all of them in my pending list. Is this going to affect my payouts?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on February 28, 2017, 06:14:13 PM
There are 4 different KMD coins on the pool:

...
...
...
...

I have all of them in my pending list. Is this going to affect my payouts?

nope, will be fine.  The main one you should use is http://www.zpool.ca/site/block?id=1902

The other ones are just my notary nodes, solo mining.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on February 28, 2017, 09:16:31 PM
There are 4 different KMD coins on the pool:

http://www.zpool.ca/site/block?id=1720
http://www.zpool.ca/site/block?id=1721
http://www.zpool.ca/site/block?id=1730
http://www.zpool.ca/site/block?id=1902

I have all of them in my pending list. Is this going to affect my payouts?

nope, will be fine.  The main one you should use is http://www.zpool.ca/site/block?id=1902

The other ones are just my notary nodes, solo mining.

I understand. That means, it is very unlikely that zpool will ever run out of KMD for payouts in this currency, right?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on March 03, 2017, 06:13:09 AM
hey bro any chance of adding DaggerHashimoto based pool please ??

#Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 03, 2017, 07:12:39 PM
All of my miners stopped mining.  I noticed the script keeps looping (CPUminer).  I typed in the command to mine xevan manually and it disconnects right away.  Since xevan is the higher than the other CPU algos, it just keeps looping.  i can manually type the command to mine m7m, but that's it.

Something going on with the xevan algo?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 03, 2017, 07:19:16 PM
All of my miners stopped mining.  I noticed the script keeps looping (CPUminer).  I typed in the command to mine xevan manually and it disconnects right away.  Since xevan is the higher than the other CPU algos, it just keeps looping.  i can manually type the command to mine m7m, but that's it.

Something going on with the xevan algo?

should be ok now.

I messed up a path in the restart script so it didn't restart after it must have had a problem.

cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 03, 2017, 07:23:57 PM
All of my miners stopped mining.  I noticed the script keeps looping (CPUminer).  I typed in the command to mine xevan manually and it disconnects right away.  Since xevan is the higher than the other CPU algos, it just keeps looping.  i can manually type the command to mine m7m, but that's it.

Something going on with the xevan algo?

should be ok now.

I messed up a path in the restart script so it didn't restart after it must have had a problem.

cheers

Yep, all good now.  Thanks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 03, 2017, 08:46:41 PM
@crackfoo, using cpuminer-opt, why is it that this works:

-p MyGamePC,xevan,m7m,yescrypt

But not this:
-p argon2,xevan,m7m,yescrypt


I was testing this to see if I could use "MyGamePC" as a way to identify which machine is actually doing the mining, and it works great!  However, if the argon2 algo is completely gone, why can't it remain in the password field?  It's like the pool still recognizes this string and trying to do something with it.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on March 03, 2017, 09:46:37 PM
@crackfoo, using cpuminer-opt, why is it that this works:

-p MyGamePC,xevan,m7m,yescrypt

But not this:
-p argon2,xevan,m7m,yescrypt

Algos left in the password field will tell the pool you want to switch to that algo if profitable....  This is your problem.  The algo switching is independent of the algos available if that makes any sense.... just because its disabled, doesn't mean the pool doesn't know it still exists.

Remove the extra algo names that aren't available/you arent mining, and it should fix your problems....

I have been using machine identifiers as the first bit in my password fields since day one of zpool.  They are handy, and it works fine.

Since argon2 is a real algo;  its causing a problem.   I.E.  never name a machine after an algo type.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on March 04, 2017, 06:38:05 AM
any issues currently with the multi pool . im getting only stratum connection errors no mining?
don't worry working now..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on March 04, 2017, 03:41:37 PM
Any issues with decred payouts?  I've got four stuck transactions, been 20 hours from the first one.  Not showing a transaction hash for any of them.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on March 04, 2017, 10:01:19 PM
Any issues with decred payouts?  I've got four stuck transactions, been 20 hours from the first one.  Not showing a transaction hash for any of them.

Last block before a few hours ago was 2d ago....

Looks like not enough mined.

Check the pool status page for the algo and coin you are inquiring about;  you can see for yourself and guestimate how long it may or may not be; based on the block TTF, reward, and last time block(s) found.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 04, 2017, 10:29:15 PM
Any issues with decred payouts?  I've got four stuck transactions, been 20 hours from the first one.  Not showing a transaction hash for any of them.

Just had a string of bad luck, but have a new block and payouts should go next round ~ 3 hours.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on March 04, 2017, 11:31:47 PM
Yep I see that.  I wasn't reading the tables right, makes sense now.  Thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 05, 2017, 08:44:51 PM
Is it me or is the totals not adding up?  I know the values may be estimates based on current value, but the discrepancy is huge.

http://imgur.com/Oylpu59 (http://imgur.com/Oylpu59)

Says total is 0.00067336 BTC, but should be 0.00091193 BTC.

Not the only time I noticed this huge discrepancy.  On Friday, I noticed it but didn't get a chance to post it to imgur (couldn't do it from work):

http://imgur.com/e2vruI7 (http://imgur.com/e2vruI7)


Says total is 0.00066279 BTC, but should be 0.00086694 BTC.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on March 05, 2017, 09:35:58 PM
Is it me or is the totals not adding up?  I know the values may be estimates based on current value, but the discrepancy is huge.

http://imgur.com/Oylpu59 (http://imgur.com/Oylpu59)

Says total is 0.00067336 BTC, but should be 0.00091193 BTC.

Not the only time I noticed this huge discrepancy.  On Friday, I noticed it but didn't get a chance to post it to imgur (couldn't do it from work):

http://imgur.com/e2vruI7 (http://imgur.com/e2vruI7)


Says total is 0.00066279 BTC, but should be 0.00086694 BTC.

You did not read the lines just below that table:

 * a general estimate from current exchange rates
 ** bitstamp 1 265.03 USD/BTC
 *** Payouts 60+ days old are purged.
 **** Total Unpaid is a combination of your confirmed Balance and your fluctuating total pending. This value will rarely be constant.

"Total pending" is a value calculated on exchange price and a few other variables.  Look over the publically available pool code to find out exactly what and how.  It's extremely complex for the layman.

Exchange prices on coins can change drastically.  The only number that can't be decreased unless you receive a payout is your "Balance".

If the pool is trying to make a payout, it can change the sale price to sell off inventory to pay the miners.  It would be pretty crappy is the pool held out for a specific sale price that never came.

Just because median exchange price is X, doesn't mean your mined coins will sell for X.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 05, 2017, 10:52:45 PM
I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on March 05, 2017, 11:05:54 PM
I have two of the quads mining at nicehash.  They are rock solid.  I've tried zpool and miningpoolhub, but for some reason would end up with odd disconnects and periods of no mining; even though I have two 1070 rigs mining on zpool without issue.  Been trying to buy more baikal quads but they seem to be out of stock.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 05, 2017, 11:15:59 PM
I have two of the quads mining at nicehash.  They are rock solid.  I've tried zpool and miningpoolhub, but for some reason would end up with odd disconnects and periods of no mining; even though I have two 1070 rigs mining on zpool without issue.  Been trying to buy more baikal quads but they seem to be out of stock.

ok thanks. maybe since I have some I can find a way to make them work better on the pool.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: thayimmy on March 05, 2017, 11:26:13 PM
yes

i am running 9 on the Baikal mini's and i also have issues with the miners hanging at times during algo switching. i usually limit them to x11 and quark and that seems to be more stable.

also does Zpool still offer payouts in other coins not mined like Bitcoindark and such? if not could that be an option again in tha future?

i love what you have done and continue doing for tha crypto world

thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 06, 2017, 10:23:37 PM
Something going on with Xevan mining.  Keeps disconnecting.

Edit: Seems to be fine now.  For a few minutes I noticed the xevan pool hashrate was very low as well.  Looks like a hiccup that lasted a few minutes.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 06, 2017, 10:40:57 PM
Something going on with Xevan mining.  Keeps disconnecting.

Edit: Seems to be fine now.  For a few minutes I noticed the xevan pool hashrate was very low as well.  Looks like a hiccup that lasted a few minutes.

looks like someone was trying to rent some and their pool was causing problems. disabled it for renting


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Osr on March 07, 2017, 01:50:57 PM
I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching?


I`ve got 3 Quards and  set it to all (x11,qubit ets). It`s work fine for a two or three days, but suddenly stop mining. Ive rebooted  it  3 times and it works fine but just for 2 hours. And again same problem. So i just go to x11 mining.
I came back to all algo mining yesterday and its ok now. But we will see in severals days if it works fine.
I think you can PM to @baikal for some advice.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 07, 2017, 01:52:53 PM
I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching?


I`ve got 3 Quards and  set it to all (x11,qubit ets). It`s work fine for a two or three days, but suddenly stop mining. Ive rebooted  it  3 times and it works fine but just for 2 hours. And again same problem. So i just go to x11 mining.
I came back to all algo mining yesterday and its ok now. But we will see in severals days if it works fine.
I think you can PM to @baikal for some advice.

great thanks! Can't wait to try them out. if only UPS would stop getting delays :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 07, 2017, 06:26:55 PM
Any chance we'll see equihash in the benchmarks tab?  I'm curious as to what kind of hash rates people are getting with their video cards.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 07, 2017, 06:44:10 PM
Any chance we'll see equihash in the benchmarks tab?  I'm curious as to what kind of hash rates people are getting with their video cards.

there needs to be a miner built that support the stats feature. AFAIK, none are using it yet....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 07, 2017, 09:44:14 PM
Any chance we'll see equihash in the benchmarks tab?  I'm curious as to what kind of hash rates people are getting with their video cards.
Yeah, I also noticed I haven't found an equihash miner that also doesn't mine for the dev.


there needs to be a miner built that support the stats feature. AFAIK, none are using it yet....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Spiffy_1 on March 08, 2017, 02:57:14 AM
I noticed that recently the website won't show me my miners.  I don't see a hashrate or blocks found either.  I'm assuming this is just a temporary glitch.  Just bringing it to your attention Crackfoo.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 08, 2017, 03:03:38 AM
I noticed that recently the website won't show me my miners.  I don't see a hashrate or blocks found either.  I'm assuming this is just a temporary glitch.  Just bringing it to your attention Crackfoo.

what browser are you using? I see mine just fine... using chrome. Can you try private/incognito?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on March 08, 2017, 05:42:05 AM
I noticed that recently the website won't show me my miners.  I don't see a hashrate or blocks found either.  I'm assuming this is just a temporary glitch.  Just bringing it to your attention Crackfoo.

happened to me once, hold shift down and push f5.. should clear it


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on March 08, 2017, 06:42:34 AM
I noticed that recently the website won't show me my miners.  I don't see a hashrate or blocks found either.  I'm assuming this is just a temporary glitch.  Just bringing it to your attention Crackfoo.

happened to me once, hold shift down and push f5.. should clear it

I had to restart my miner apps.

A 750ti machine that has 24/7 ontime;  has been a ghost miner for me for several months.

when I turn the farm off;  I still have some Mh on skein.  pretty funny ;)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 08, 2017, 07:36:31 PM
I'm seeing the same thing.  Had to restart miners (or at least the ones I can get to now).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on March 09, 2017, 09:14:20 AM
hi crackfoo any chance you could look into adding a  few more algos/coins :

NETKO coin (new blake2s coin)  &  Cryptonight Monero   &   Ethash,   &   wildkeccak   algo  if possible

best Regards
#Nemo



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: psycodad on March 13, 2017, 04:19:42 PM
Crackfoo,

Did you remove scrypt from Hashtap? I can't select it anymore for new taps, though the one I have keeps going and another one changed to sha256t.

Thanks - psycodad


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 13, 2017, 04:25:41 PM
Crackfoo,

Did you remove scrypt from Hashtap? I can't select it anymore for new taps, though the one I have keeps going and another one changed to sha256t.

Thanks - psycodad

yeah I did. A few renters kept putting in crappy pools causing it to restart.

yeah if you have an existing one, you can keep it. I disabled it so no new taps can get created.... unless requested. I can add them to renters manually


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 13, 2017, 04:34:13 PM
I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching?


I`ve got 3 Quards and  set it to all (x11,qubit ets). It`s work fine for a two or three days, but suddenly stop mining. Ive rebooted  it  3 times and it works fine but just for 2 hours. And again same problem. So i just go to x11 mining.
I came back to all algo mining yesterday and its ok now. But we will see in severals days if it works fine.
I think you can PM to @baikal for some advice.

great thanks! Can't wait to try them out. if only UPS would stop getting delays :)

Been running the Baikal Giant now steady @918Mh and haven't seen any problems with switching or getting stuck.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on March 13, 2017, 04:53:14 PM
I see that DGC has allot of orphaned blocks, scrypt and sha256


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 13, 2017, 05:38:48 PM
I see that DGC has allot of orphaned blocks, scrypt and sha256

yeah, once upon a time I dropped DGC... and I am again now.

thnx


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 14, 2017, 04:01:51 AM
Are we having problems with equihash stratum?  i keep getting disconnected every so often, and retries several times (for about a couple minutes) before reconnecting.

ZEC: Stratum - Cannot connect to mine.zpool.ca:2142
ZEC: Stratum - Failed to connect, retry in 20 sec...
ZEC: Stratum - Cannot connect to mine.zpool.ca:2142
ZEC: Stratum - Failed to connect, retry in 20 sec...
ZEC: Stratum - Cannot connect to mine.zpool.ca:2142
ZEC: Stratum - Failed to connect, retry in 20 sec...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 14, 2017, 01:19:24 PM
Are we having problems with equihash stratum?  i keep getting disconnected every so often, and retries several times (for about a couple minutes) before reconnecting.

ZEC: Stratum - Cannot connect to mine.zpool.ca:2142
ZEC: Stratum - Failed to connect, retry in 20 sec...
ZEC: Stratum - Cannot connect to mine.zpool.ca:2142
ZEC: Stratum - Failed to connect, retry in 20 sec...
ZEC: Stratum - Cannot connect to mine.zpool.ca:2142
ZEC: Stratum - Failed to connect, retry in 20 sec...

yeah, I've been consolidating coins onto one machine and waiting for another to be provisioned from OVH so the box is a bit slow so coins are a bit slower to respond causing stratum to think sometimes there are no coins and restarts. just waiting for the email from OVH with the new server info. I've bought new machines for all the coins so now will have 2 huge ones, instead of 4 mediocre ones... Once that is done, there should be less interruptions. I just needed to get them all moved into one since the renewals are up on the older boxes.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 14, 2017, 03:23:57 PM
yeah, I've been consolidating coins onto one machine and waiting for another to be provisioned from OVH so the box is a bit slow so coins are a bit slower to respond causing stratum to think sometimes there are no coins and restarts. just waiting for the email from OVH with the new server info. I've bought new machines for all the coins so now will have 2 huge ones, instead of 4 mediocre ones... Once that is done, there should be less interruptions. I just needed to get them all moved into one since the renewals are up on the older boxes.

Cheers

Thanks for the update, mate.

Also, I noticed the Komodo (equihash) was estimated to worth 0 BTC for a good while.  Looks like it's corrected now.  Any insight to that strange behavior?

I know sometimes it seems like we don't appreciate the work and the responses when we report issues, but it's only because we're loyal that we let you know of issues we find so quickly. :)  I'd like to take this time out to let you know how much I enjoy mining at this pool, as well as your quick attentiveness and repsones.  Many pool owners tend to stop responding to their users and then simply fade away (ex: Wafflepool), so your good work is not going unnoticed, crackfoo.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 14, 2017, 03:54:55 PM
yeah, I've been consolidating coins onto one machine and waiting for another to be provisioned from OVH so the box is a bit slow so coins are a bit slower to respond causing stratum to think sometimes there are no coins and restarts. just waiting for the email from OVH with the new server info. I've bought new machines for all the coins so now will have 2 huge ones, instead of 4 mediocre ones... Once that is done, there should be less interruptions. I just needed to get them all moved into one since the renewals are up on the older boxes.

Cheers

Thanks for the update, mate.

Also, I noticed the Komodo (equihash) was estimated to worth 0 BTC for a good while.  Looks like it's corrected now.  Any insight to that strange behavior?

I know sometimes it seems like we don't appreciate the work and the responses when we report issues, but it's only because we're loyal that we let you know of issues we find so quickly. :)  I'd like to take this time out to let you know how much I enjoy mining at this pool, as well as your quick attentiveness and repsones.  Many pool owners tend to stop responding to their users and then simply fade away (ex: Wafflepool), so your good work is not going unnoticed, crackfoo.

yeah I replied to you on twitter. Seem cryptopia went offline again. if all the exchanges put the wallet in maintenance, it goes to 0. There was a hardfork yesterday for KMD to roll back the chain from someone who took advantage of bug. Even now, cryptopia's wallet/api message doesn't show it's in maintenance but coins that were sent, haven't show up so the pool put it back offline.

EDIT.... and now seems to be back online.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Osr on March 15, 2017, 03:54:08 PM
I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching?


I`ve got 3 Quards and  set it to all (x11,qubit ets). It`s work fine for a two or three days, but suddenly stop mining. Ive rebooted  it  3 times and it works fine but just for 2 hours. And again same problem. So i just go to x11 mining.
I came back to all algo mining yesterday and its ok now. But we will see in severals days if it works fine.
I think you can PM to @baikal for some advice.

great thanks! Can't wait to try them out. if only UPS would stop getting delays :)

Been running the Baikal Giant now steady @918Mh and haven't seen any problems with switching or getting stuck.

I havent had any problems for  10 days. Maybe it was problem with my internet/router)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 16, 2017, 04:56:43 PM
Whoa!  Was that a 5,003.00010000 KMD block found!?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 16, 2017, 05:01:18 PM
Whoa!  Was that a 5,003.00010000 KMD block found!?

hrmm yeah looks like.

enjoy!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Rodderman on March 16, 2017, 11:53:20 PM
What happened to gold blocks?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 18, 2017, 12:37:37 PM
What happened to equihash?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 18, 2017, 02:20:58 PM
there go the hashes hmm

http://i.imgur.com/nob9u26.png (http://i.imgur.com/nob9u26.png)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 18, 2017, 03:55:45 PM
I see equihash is back, but haven't found anything in a long time.  Is it just bad luck or is something wrong?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on March 18, 2017, 04:02:26 PM
I see equihash is back, but haven't found anything in a long time.  Is it just bad luck or is something wrong?

Since ZEC is the only remaining coin for equihash it will take ages to find a block. With the current pool hashrate ~33 hours.
crackfoo should bring the other equihash coins (ZCL, ZDASH and KMD) back online for the situation to change.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 18, 2017, 06:22:23 PM
I see equihash is back, but haven't found anything in a long time.  Is it just bad luck or is something wrong?

Since ZEC is the only remaining coin for equihash it will take ages to find a block. With the current pool hashrate ~33 hours.
crackfoo should bring the other equihash coins (ZCL, ZDASH and KMD) back online for the situation to change.

I'm away on vacation in Las Vegas  and seems all the other wallets crashed so I put zec online for now. If I find time I have to fix KMD crap as well so will bring them back.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 18, 2017, 08:02:08 PM
I see equihash is back, but haven't found anything in a long time.  Is it just bad luck or is something wrong?

Since ZEC is the only remaining coin for equihash it will take ages to find a block. With the current pool hashrate ~33 hours.
crackfoo should bring the other equihash coins (ZCL, ZDASH and KMD) back online for the situation to change.

I'm away on vacation in Las Vegas  and seems all the other wallets crashed so I put zec online for now. If I find time I have to fix KMD crap as well so will bring them back.

Enjoy your vacation.  I'll just switch to neoscrypt for now.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lafu on March 19, 2017, 12:51:51 PM
@crackfoo
Hello zpool can you please explain why about one week users dont get payd or get there payouts from Dotcoin!  Please devs look at it i and other users they mine dot on your pool thinking there is something wrong!  Please Check this

Regards Lafu


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 19, 2017, 03:08:06 PM
@crackfoo
Hello zpool can you please explain why about one week users dont get payd or get there payouts from Dotcoin!  Please devs look at it i and other users they mine dot on your pool thinking there is something wrong!  Please Check this

Regards Lafu


Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lafu on March 19, 2017, 03:39:08 PM
@crackfoo
Hello zpool can you please explain why about one week users dont get payd or get there payouts from Dotcoin!  Please devs look at it i and other users they mine dot on your pool thinking there is something wrong!  Please Check this

Regards Lafu


Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

Ok so we need some miners on the dotcoin!  Thx for support
Regards Lafu


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Spiffy_1 on March 20, 2017, 12:20:38 AM
Really great work on the Equihash pool Crackfoo.  Solid for me now with no issues.  Looking foreward to a dedicated ETH/ETC/whatever port in the future.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 20, 2017, 05:55:33 PM
@crackfoo
Hello zpool can you please explain why about one week users dont get payd or get there payouts from Dotcoin!  Please devs look at it i and other users they mine dot on your pool thinking there is something wrong!  Please Check this

Regards Lafu


Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

Ok so we need some miners on the dotcoin!  Thx for support
Regards Lafu
Well the main factor is profitability. It's it's not more profitable than most of the others it can take a while to get blocks. Buy up some on the markets and push profitibailty up and it'll get mined.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on March 21, 2017, 02:07:30 AM
Really great work on the Equihash pool Crackfoo.  Solid for me now with no issues.  Looking foreward to a dedicated ETH/ETC/whatever port in the future.

+1 bring on the Ethash pool : )


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 21, 2017, 11:41:15 AM
So far nothing's been found for the past half hour.  New found blocks are stuck as "new" since (purple).

Edit: Is it just bad luck on both xevan and equihash?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: nu1mlock on March 21, 2017, 05:10:02 PM
I'm a bit confused on how to properly setup my Baikal miner with Zpool.

I mean, I get it to mine properly, but what should I set password as? Is it the currency I want to mine or the currency I want to get paid in? That's a bit unclear.

I'm also wondering if there's any way to mine a single coin instead of all coins in the algo I've chosen? I tried setting my password to c=MUE but that didn't help. I'm assuming that I'll get paid in MUE to the BTC address that's my username instead (which of course isn't good at all).

Could anyone clear those two things up for me please?

Thanks!

Edit: One more thing, the estimated earnings doesn't make any sense to me. I know they're just estimates, but the totals are way off. For example, as of writing the estimate BTC earnings for the MUE shares I've found is 0.0038. And then some for the other coins. However, the total combined BTC estimates are 0.0028. Why is that?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 21, 2017, 05:21:47 PM
I'm a bit confused on how to properly setup my Baikal miner with Zpool.

I mean, I get it to mine properly, but what should I set password as? Is it the currency I want to mine or the currency I want to get paid in? That's a bit unclear.

the currency you want to get paid in, pool chooses what to mine based on coins current profitability

I'm also wondering if there's any way to mine a single coin instead of all coins in the algo I've chosen? I tried setting my password to c=MUE but that didn't help. I'm assuming that I'll get paid in MUE to the BTC address that's my username instead (which of course isn't good at all).

no way. if you wanna get paid in MUE - use MUE address of course as username

Could anyone clear those two things up for me please?

Thanks!

Edit: One more thing, the estimated earnings doesn't make any sense to me. I know they're just estimates, but the totals are way off. For example, as of writing the estimate BTC earnings for the MUE shares I've found is 0.0038. And then some for the other coins. However, the total combined BTC estimates are 0.0028. Why is that?

where do you see "total combined" ?



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: nu1mlock on March 21, 2017, 05:27:10 PM
the currency you want to get paid in, pool chooses what to mine based on coins current profitability
no way. if you wanna get paid in MUE - use MUE address of course as username
where do you see "total combined" ?
Thanks for clearing that up. I've changed the password to c=BTC instead. I actually figured that out myself, but only because of a tweet.

Well, it doesn't say "total combined", it says "Total Pending", which is the unconfirmed and confirmed estimates combined. That BTC is currently 0.0032 as of writing, while the MUE BTC estimate is 0.0044. And then some earnings from other coins.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 21, 2017, 05:31:10 PM
the currency you want to get paid in, pool chooses what to mine based on coins current profitability
no way. if you wanna get paid in MUE - use MUE address of course as username
where do you see "total combined" ?
Thanks for clearing that up. I've changed the password to c=BTC instead. I actually figured that out myself, but only because of a tweet.

Well, it doesn't say "total combined", it says "Total Pending", which is the unconfirmed and confirmed shares combined. That BTC is currently 0.0031 as of writing, while the MUE BTC estimate is 0.0042. And then some earnings from other coins.

MUE estimate is current profitability (this very moment),
total pending is average from all you mined over the period,
and also there's 24h average in the righthand table.

edit: and also there's a guy crackfoo who needs moneyz for Vegas lol


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: nu1mlock on March 21, 2017, 05:35:30 PM
MUE estimate is current profitability (this very moment),
total pending is average from all you mined over the period,
and also there's 24h average in the righthand table.

Edit: Let me rephrase what I meant.

The current profitability estimate of my mined MUE is (as of writing) 0.005 BTC if exchanged right now.
The current profitability estimate of my mined total coins in BTC is 0.0038.

That's what it says. And that does not add up to me.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 21, 2017, 05:43:13 PM
MUE estimate is current profitability (this very moment),
total pending is average from all you mined over the period,
and also there's 24h average in the righthand table.


It doesn't add up. Or, I don't understand. I've only been mining on the pool for about 4 hours. So total pending can't differ that much from the current profitability

but it can,
24h average will always give you more reallife value than what you see in current numbers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: nu1mlock on March 21, 2017, 05:44:07 PM
but it can
I just edited my post to rephrase myself, this is what I wrote instead to make more sense:

The current profitability estimate of my mined MUE is (as of writing) 0.005 BTC if exchanged right now.
The current profitability estimate of my mined total coins in BTC is 0.0038.

That's what it says. And that does not add up to me.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 21, 2017, 05:47:05 PM
but it can
I just edited my post to rephrase myself, this is what I wrote instead to make more sense:

The current profitability estimate of my mined MUE is (as of writing) 0.005 BTC if exchanged right now.
The current profitability estimate of my mined total coins in BTC is 0.0038.

That's what it says. And that does not add up to me.

ahh, ok, always take 20% off of the maximum,
the reason explained 2 my posts above in edit section lol, not a joke actually


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: nu1mlock on March 21, 2017, 05:53:26 PM
ahh, ok, always take 20% off of the maximum,
the reason explained 2 my posts above in edit section lol, not a joke actually

Here, I'll link you an image so you can take a look. Please let me know if I'm interpreting it wrong:
http://i.imgur.com/wt8TioK.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 21, 2017, 05:56:52 PM
ahh, ok, always take 20% off of the maximum,
the reason explained 2 my posts above in edit section lol, not a joke actually

Here, I'll link you an image so you can take a look. Please let me know if I'm interpreting it wrong:

pm'd


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 21, 2017, 06:32:09 PM
oh btw, another glorious moment, 2.6G of quark over 0.024 diff,
tiger making love to a squirrel, the forest is full of screeeeaaaaming

http://i.imgur.com/It5r1Ol.png (http://i.imgur.com/It5r1Ol.png)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: goo38 on March 21, 2017, 09:04:15 PM
What happened to the netko balance on blake2s pool? All mined coins show 0 btc value.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 21, 2017, 10:00:32 PM
What happened to the netko balance on blake2s pool? All mined coins show 0 btc value.

looks like there was a fake pump, so some pump protection disabled the market. should have appropriate values


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: goo38 on March 21, 2017, 10:18:48 PM
What happened to the netko balance on blake2s pool? All mined coins show 0 btc value.

looks like there was a fake pump, so some pump protection disabled the market. should have appropriate values

Understood, thanks for the update.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 21, 2017, 10:32:08 PM
We had great luck with equihash and xevan this past week.  Are they in a slump now?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 22, 2017, 12:04:29 AM
We had great luck with equihash and xevan this past week.  Are they in a slump now?

The hashrate has dropped some and KMD diff is going up so perhaps gettinga bit unlucky, xeven looks like now has a big miner or pool somewhere else. we used to be ~60% of the network. down to ~15-20% now


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: alfaboy23 on March 22, 2017, 03:01:18 AM
We had great luck with equihash and xevan this past week.  Are they in a slump now?

The hashrate has dropped some and KMD diff is going up so perhaps gettinga bit unlucky, xeven looks like now has a big miner or pool somewhere else. we used to be ~60% of the network. down to ~15-20% now
Ah, that maybe the reason why my low-end PC is getting 100K+ satoshis a day now from 50K satoshis a day some days ago.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: MrZoidberg on March 22, 2017, 01:02:25 PM
Hello! I am new to zpool and have a question about BTC payouts. Who covers the transaction fee? If I receive a 0.0005 payout on Sunday, isn't 0.0005 pretty close to the transaction fee to send me the bitcoin? If I'm willing to accept DASH (for example), would it not be preferable since the transaction fee is much lower?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 22, 2017, 01:13:44 PM
Hello! I am new to zpool and have a question about BTC payouts. Who covers the transaction fee? If I receive a 0.0005 payout on Sunday, isn't 0.0005 pretty close to the transaction fee to send me the bitcoin? If I'm willing to accept DASH (for example), would it not be preferable since the transaction fee is much lower?
I cover the tx fees for payments. If you have 0.0005 balance, you get exactly 0.0005 payment.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 22, 2017, 03:48:42 PM
Is KMD no longer being mined?  I don't see it listed as a coin being mined on equihash.

Also, we've never found a zcoin block that I know of.  The profits seems to have come from hashtap (last one being 3 weeks ago).  Anyone know the story behind this coin/algo?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 23, 2017, 02:13:24 PM
KMD was back for a little bit, and now it's gone again.  What's going on with KMD?

Also what is up with XZC (lyra2z)?  It's been pretty high on the profitability list.  Some of my miners switched to it.  I've had shares for over 3 weeks now and nothing has been found.  TTF is 4 months!  Is it worth mining?  Would it be a big payout if we finally find a block?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 23, 2017, 02:29:33 PM
KMD was back for a little bit, and now it's gone again.  What's going on with KMD?

Also what is up with XZC (lyra2z)?  It's been pretty high on the profitability list.  Some of my miners switched to it.  I've had shares for over 3 weeks now and nothing has been found.  TTF is 4 months!  Is it worth mining?  Would it be a big payout if we finally find a block?

yeah, KMD had a big problem with the chain which we got sorted out last night and now seems something else is up... devs are looking into it.

I was hoping more miners would hop on this algo but seems there's not much interest unfortunatly...



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on March 23, 2017, 08:32:50 PM

yeah, KMD had a big problem with the chain which we got sorted out last night and now seems something else is up... devs are looking into it.

I was hoping more miners would hop on this algo but seems there's not much interest unfortunatly...



Looks like KMD is back again, but says they're worth 0 BTC...

As for lyra2z, yeah I thought as the profitability goes up, more would mine it.  My miners automatically switched to them but it seems like me and 3 other miners are the only one pointing at this algo.

Edit: never mind... Looks like KMD is unavailable again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on March 24, 2017, 11:34:34 PM
HI
WHATS THE POINT OF EVEN ENABLING Komodo WHEN ZCASH CLASSIC IS MORE PROFITABLE WOUNT'T THE POOL AND THE MINERS MAKE MORE PER DAY IF YOU ONLY ENABLED ZCASH CLASSIC LET ME KNOW IF IM INCORRECT I JUST DONT SEE THE POINT OF HAVING HASH GOING TO Komodo WHEN ZCASH CLASSIC IS ALOT MORE PROFITABLE??

#NEMO

wut ? i don't hear ya..

jokes aside, zcl is not more profitable all the way for this pool


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 25, 2017, 12:42:04 AM
Yes, but think how many blocks can be found at the lower diff in the same amount of time to find a zcl block. The pool is designed to continuously and as efficiently as possible constantly earn. In the end there should be little difference and only the luck be a factor and anyone can win or loose.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on March 26, 2017, 01:49:11 AM
i really hope we break this decred block, i want to see how much i get.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on March 26, 2017, 10:15:50 AM
Something is wrong with the blake2s algo. The hashrate of the 2 coins (Taj and Neva) don't match the total hashrate of the algo. Where is the rest going?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on March 26, 2017, 10:32:57 AM
NemosMiner-v1.6.8  https://bitcointalk.org/index.php?topic=1777336.0 (https://bitcointalk.org/index.php?topic=1777336.0)

replaced sib Alexcuda8 with Alexcuda 7.5 +5.2%  
replaced EWBF's Version 0.3.2b with EWBF's Version 0.3.3b. +2%
replaced lbry Tanguy with Alexcuda7.5 +1.8%
replaced lyra2v2 nanashi with Alexcuda7.5 +6.6%
replaced neoscrypt KlausT with Alexcuda7.5 +4.6%
replaced nist5 Tanguy with Alexcuda7.5 +12.3%              
replaced c11 sp-mod with Alexcuda7.5  +19.7%
replaced skein sp-mod with Alexcuda7.5 +1.5%
replaced x17 sp-mod with Alexcuda7.5 +24.8%
            
NemosMiner-v1.6.8 if you have errors coming up=to fix install MS Visual Studio:
https://www.visualstudio.com/post-download-vs/?sku=community&clcid=0x409&telem=ga# (https://www.visualstudio.com/post-download-vs/?sku=community&clcid=0x409&telem=ga#)


NemosMiner-v1.6.8  (REMEMBER TO INCREASE YOUR VIRTUAL MEMORY/SWAP FILE to 32gb-40gb some algos such as SIB(x11ghost) use it

Regards
#Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: alhal1 on March 30, 2017, 06:17:13 PM
Yes, but think how many blocks can be found at the lower diff in the same amount of time to find a zcl block. The pool is designed to continuously and as efficiently as possible constantly earn. In the end there should be little difference and only the luck be a factor and anyone can win or loose.
It's been a day now and 2 days since I was on 2 dollar bitcoin:
https://gyazo.com/caee5aa8dec7e7122948ecf46545b5cf
When will I get paid?
The payout times are passing but it's not going to my wallet?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on March 30, 2017, 06:23:15 PM
Yes, but think how many blocks can be found at the lower diff in the same amount of time to find a zcl block. The pool is designed to continuously and as efficiently as possible constantly earn. In the end there should be little difference and only the luck be a factor and anyone can win or loose.
It's been a day now and 2 days since I was on 2 dollar bitcoin:
https://gyazo.com/caee5aa8dec7e7122948ecf46545b5cf
When will I get paid?
The payout times are passing but it's not going to my wallet?

i do believe less than .005 is paid on sunday.
if its over .005 then you get paid the next pay cycle.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on March 30, 2017, 06:25:54 PM
Yes, but think how many blocks can be found at the lower diff in the same amount of time to find a zcl block. The pool is designed to continuously and as efficiently as possible constantly earn. In the end there should be little difference and only the luck be a factor and anyone can win or loose.
It's been a day now and 2 days since I was on 2 dollar bitcoin:
https://gyazo.com/caee5aa8dec7e7122948ecf46545b5cf
When will I get paid?
The payout times are passing but it's not going to my wallet?

i do believe less than .005 is paid on sunday.
if its over .005 then you get paid the next pay cycle.


Thats right. Listed right on the main page:

Payouts are made automatically every 6 hours for all balances above 0.005 and balances more than 0.0005 are paid on Sunday.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 01, 2017, 03:54:07 PM
No new xevan found in 7 hours?  Ouch.  Bad luck or something go wrong?  Another moreover powerful pool somewhere?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 01, 2017, 05:07:51 PM
No new xevan found in 7 hours?  Ouch.  Bad luck or something go wrong?  Another moreover powerful pool somewhere?

I'll restart the wallet and stratum but I'm, not seeing any errors.... but yeah... really bad luck it seems.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 03, 2017, 12:17:06 PM


yeah, I've been consolidating coins onto one machine and waiting for another to be provisioned from OVH so the box is a bit slow so coins are a bit slower to respond causing stratum to think sometimes there are no coins and restarts. just waiting for the email from OVH with the new server info. I've bought new machines for all the coins so now will have 2 huge ones, instead of 4 mediocre ones... Once that is done, there should be less interruptions. I just needed to get them all moved into one since the renewals are up on the older boxes.

Cheers

Finally got this machine provisioned last week and I've bumped up the inventory for the pool as I've got the coins balanced out and recompiled. Can see the profitability has increased for scrypt x11 and sha256 again.

Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on April 03, 2017, 03:24:37 PM
Is this normal? Shouldnt my balance be going up?

http://imgur.com/a/mU45k


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 03, 2017, 03:26:45 PM
Is this normal? Shouldnt my balance be going up?

http://imgur.com/a/mU45k

it goes up when blocks get found. It went down when you got paid.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on April 03, 2017, 03:41:46 PM
I think I see now, The last block found was 23 hours ago. Got it, thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 03, 2017, 03:53:37 PM
I think I see now, The last block found was 23 hours ago. Got it, thanks

yeah for DCR, hoping we can get another soon too. We were on a little hot streak.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on April 03, 2017, 10:18:40 PM
yeah for DCR, hoping we can get another soon too. We were on a little hot streak.

My 3GH/s should help!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on April 04, 2017, 01:33:11 AM
http://i.imgur.com/JQeXTrb.png

What does the 1.0139% Shares mean?

Is there a way to see how many total shares I submitted?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 04, 2017, 04:02:07 PM
I'm off to Jamaica until the end of next week. Responses will be delayed but the best/easiest way to get my attention is to please tweet me especially if you notice some major issues with the pool.

Cheers and Happy Hashing!



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Percivul on April 05, 2017, 04:47:14 PM
can you please add Monero (XMR)

and "Honey" new (blake2s) very profitable atm.... please add asap

Agreed on both.  Cryptonight at the minimum should be added.  Please consider doing so!

Thanks!

Also, I'm noticing very high rejection rates for Equihash but the pool is showing that it's accepting the submissions, as is the client.  Is this normal?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on April 05, 2017, 07:00:55 PM
can you please add Monero (XMR)

and "Honey" new (blake2s) very profitable atm.... please add asap

Honey would need to be on Cryptopia, bluetrade or yobit before Crackfoo will add. Last I checked it was only on Coinexchange.

He should add XLR, Solaris. A new nist5 coin that is listed on Cryptopia.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 05, 2017, 07:42:24 PM
@crackfoo, Just tweeted you.  Looks like Equihash stratum is down.

Update: 2 hours later, it seems to be back up, but KMD is disabled.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on April 06, 2017, 08:19:54 AM
 "Honey" (blake2s) "Solaris" (nist5) very profitable atm.... please add asap


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 06, 2017, 09:29:49 PM
@crackfoo, Just tweeted you.  Looks like Equihash stratum is down.

Update: 2 hours later, it seems to be back up, but KMD is disabled.

Yup thanks. Saw it. Kmd forked and caused a bit of a shit storm so I disabled it till I could rebuild and sync.

All back on track again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 07, 2017, 12:28:18 AM
@crackfoo, Just tweeted you.  Looks like Equihash stratum is down.

Update: 2 hours later, it seems to be back up, but KMD is disabled.

Yup thanks. Saw it. Kmd forked and caused a bit of a shit storm so I disabled it till I could rebuild and sync.

All back on track again.

Yep, all good now.  Thanks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: OverP on April 07, 2017, 06:49:44 PM
Actually i'm mining in skein pool with 5Gh/s and i need to ask you Just One thing,Will you ever Delete xedos fronte mined cryptos?It is so unprofitable


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 07, 2017, 08:17:40 PM
Actually i'm mining in skein pool with 5Gh/s and i need to ask you Just One thing,Will you ever Delete xedos fronte mined cryptos?It is so unprofitable

Very little hashrtae is actually goin on xedos. It's like eating some peanuts while waiting for your supper.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 11, 2017, 05:59:02 AM
You are a scammer!

Summary   Miners   Shares   Hashrate*   Reject*
decred   2   1.638%   7.9 GH/s   0.2%

Details   Extra   Algo   Diff   ES**   Hashrate*   Reject*
dual      decred   18      6.9 GH/s
dual      decred   4      1.1 GH/s

And after 32 hours not a single payout!  You are a damn scammer!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on April 11, 2017, 06:36:06 AM
You are a scammer!

Summary   Miners   Shares   Hashrate*   Reject*
decred   2   1.638%   7.9 GH/s   0.2%

Details   Extra   Algo   Diff   ES**   Hashrate*   Reject*
dual      decred   18      6.9 GH/s
dual      decred   4      1.1 GH/s

And after 32 hours not a single payout!  You are a damn scammer!

Relax... Decred pool has not found a block in 3 days, further the pool is short of DCR. There are no coin payouts if the pool is short (and see previous sentence if your payout is bitcoin[3 days with no blocks]). I think the shortages have to reach a certain limit before half pay kicks in (where you get partial payments until the pool is no longer short).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 11, 2017, 07:04:20 AM
Than why is there not even an estimate?  On other pools it will show you estimated reward.   But all I get with this one is.. 1.6663%.  What does that mean to me in Estimated rewards? 



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: galixxx on April 11, 2017, 07:59:57 AM
Hi there, @crackfoo could you please have a look at ticket #244. Thanks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 11, 2017, 11:56:00 AM
decred estimate is 47 hours with 131Gh/s just click on algo, it's under TTF, for other question I already answered on previous page, your reward would be 1,638% minus fees if block was found at the time you saw those %.

AFAIk, that % is just the current % compared to the pool. It may not necessarily be how many shares you've got against miners that have also put in shares but may not be mining just now.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 11, 2017, 12:29:29 PM
it is your % of shares towards current round, if you stop mining and another is mining that % will start to drop, see some empty port at the moment like nist5, if you start now, your shares will be low and will rise over time as someone had started that round before you but quit early, just after a block is solved you will have 100% shares as you mine alone.

i don't remember which payout scheme is yaamp/yiimp, pplns or prop or what ?
from what i see share stats (%) are prop, but actual earnings look more like pplns, not sure.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 11, 2017, 02:54:52 PM
prop, it shows % instead of number shares and total shares

yes it shows but not gives, i could never make 100%


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 12, 2017, 02:55:37 AM
Thanks for the explanation.  I did not realize it was a 44 hour pool for payouts. So almost 2 full days.  Maybe put that on the main wallet page.  Once I was informed about algo and went to that page I found the reference for 44 hours.  Nice immature balance payout also so satisfied with the pool.  Told my friend to jump on this one as he has been using YIMP.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on April 12, 2017, 05:12:57 AM
Thanks for the explanation.  I did not realize it was a 44 hour pool for payouts. So almost 2 full days.  Maybe put that on the main wallet page.  Once I was informed about algo and went to that page I found the reference for 44 hours.  Nice immature balance payout also so satisfied with the pool.  Told my friend to jump on this one as he has been using YIMP.

this pool pays out every six hours if your balance is above .005


you happen to be mining a coin that has low hashrate and goes several hours between blocks.

this is NOT a pps pool.. you only get paid when a block is found and its confirmed..

that being said , looks like there was 2 blocks found today..





Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 12, 2017, 09:37:30 PM
Ok I have a bit of a question to understand the earnings page for Zpool.

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name            Amount            Percent    mBTC    Time     Status
   Decred (decred)   0.795311 DCR   4.155%   5.17342   19h ago   Exchange
   Decred (decred)   0.478900 DCR   2.342%   3.11520   19h ago   Exchange


Wallet: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
   Name            Immature           Confirmed   Total           Value*
   Decred (decred)   0.000000           1.274211   1.274211   1.27421075 DCR

   Decred
       (total pending)                      0.88902345      0.88902345 DCR
   Balance                                                              0.00000000 DCR
   Total Unpaid ****                                              0.88902345 DCR
   Total Paid ***                                                      0.00000000 DCR
   Total Earned                                                      0.88902345 DCR

If my total shows 1.274211 why does my confirmed only show .88902345?  The status for the total earnings also show 1.27.  So not really sure how this works on this site.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on April 12, 2017, 10:16:01 PM
Ok I have a bit of a question to understand the earnings page for Zpool.

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name            Amount            Percent    mBTC    Time     Status
   Decred (decred)   0.795311 DCR   4.155%   5.17342   19h ago   Exchange
   Decred (decred)   0.478900 DCR   2.342%   3.11520   19h ago   Exchange


Wallet: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
   Name            Immature           Confirmed   Total           Value*
   Decred (decred)   0.000000           1.274211   1.274211   1.27421075 DCR

   Decred
       (total pending)                      0.88902345      0.88902345 DCR
   Balance                                                              0.00000000 DCR
   Total Unpaid ****                                              0.88902345 DCR
   Total Paid ***                                                      0.00000000 DCR
   Total Earned                                                      0.88902345 DCR

If my total shows 1.274211 why does my confirmed only show .88902345?  The status for the total earnings also show 1.27.  So not really sure how this works on this site.


this site exchanges the dcr for btc, you wont really know how much you get until it happens.. all numbers are estimates..

just noticed you are asking to be paid out in dcr.. not sure why its different.

i think how it works is when you mine dcr on here and ask to be paid out in dcr it still takes the value from the exchange rate.. then it uses your btc to buy back dcr.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on April 12, 2017, 11:33:46 PM
@Crackfoo, any reason you don't have ethash algorithm and the associated coins?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 13, 2017, 12:15:18 AM
Any reason you don't have ethash algorithm and the associated coins?

Bit confused by your question. I am totally new to this pool and was using Suprnova before and any other pools I used all paid in what you mined as payment and did not exchange.  So am I costing myself earned rewards by getting paid in something else than BTC?  Should I be using a BTC wallet?   

Only other pools  I have used is Coinotron and Suprnova so how a pool like this one works is new to me.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 13, 2017, 02:33:49 AM
I have a question how long does it take for a decred deposit take? I got this status...

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name    Amount    Percent    mBTC    Time    Status
   Decred (decred)   0.795311 DCR   4.155%   5.23140   24h ago   Cleared
   Decred (decred)   0.478900 DCR   2.342%   3.15011   24h ago   Cleared

Balance      0.94941553 DCR

But the cleared is higher than balance?

I checked Polo and do not see a deposit in the works.

Second problem right after payout for some reason both my miners lost connection with the pool and jumped to the secondary pool.

Miners: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
Summary   Miners   Shares   Hashrate*   Reject*
decred   0           4.1257%   -   

But I have 2 miners running that are showing over 5GH/s speed. Did something happen to the pool just now?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: aarons6 on April 13, 2017, 02:43:13 AM
I have a question how long does it take for a decred deposit take? I got this status...

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name    Amount    Percent    mBTC    Time    Status
   Decred (decred)   0.795311 DCR   4.155%   5.23140   24h ago   Cleared
   Decred (decred)   0.478900 DCR   2.342%   3.15011   24h ago   Cleared

Balance      0.94941553 DCR

But the cleared is higher than balance?

I checked Polo and do not see a deposit in the works.

Second problem right after payout for some reason both my miners lost connection with the pool and jumped to the secondary pool.

Miners: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
Summary   Miners   Shares   Hashrate*   Reject*
decred   0           4.1257%   -   

But I have 2 miners running that are showing over 5GH/s speed. Did something happen to the pool just now?

it looks like dcr is short.. the name is red.. this means you wont get paid out until more blocks are found.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 13, 2017, 03:06:02 AM
2 miners running that are showing over 5GH/s speed. Did something happen to the pool just now?

it looks like dcr is short.. the name is red.. this means you wont get paid out until more blocks are found.

[/quote]

Ok where is the name shown in red? I am confused about this as I did not see a red font for the coin except the word hot.. And is that why payouts should be in BTC and not Decred?

   Balance              0.94941553 DCR
   Total Unpaid ****   0.94941553 DCR  (Why is this lower than the cleared?)
   Total Paid ***      0.00000000 DCR
   Total Earned      0.94941553 DCR

But the cleared shows more.

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name            Amount            Percent    mBTC    Time            Status
   Decred (decred)   0.795311 DCR   4.155%   5.23140   24h ago   Cleared
   Decred (decred)   0.478900 DCR   2.342%   3.15011   25h ago   Cleared

I am just really confused on why mine on a pool that you may not get paid on for a long time?  Yet it seems to be one of the larger Decred pools.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 13, 2017, 03:54:37 AM
I have a question how long does it take for a decred deposit take? I got this status...

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name    Amount    Percent    mBTC    Time    Status
   Decred (decred)   0.795311 DCR   4.155%   5.23140   24h ago   Cleared
   Decred (decred)   0.478900 DCR   2.342%   3.15011   24h ago   Cleared

Balance      0.94941553 DCR

But the cleared is higher than balance?

I checked Polo and do not see a deposit in the works.

Second problem right after payout for some reason both my miners lost connection with the pool and jumped to the secondary pool.

Miners: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
Summary   Miners   Shares   Hashrate*   Reject*
decred   0           4.1257%   -   

But I have 2 miners running that are showing over 5GH/s speed. Did something happen to the pool just now?

pal, if you need DCR go to http://yiimp.ccminer.org/ and never turn back to zpool it's no good for dcr mining.

simple answers:
cleared is higher than balance - crackfoo needs moneyz
do not see a deposit in the works - right now pool is short of dcr, you'll have your coins once pool mined enough
right after payout ... my miners lost connection - yes, during payout pool goes to stasis for several minutes


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: NeuroticFish on April 13, 2017, 09:38:30 AM
@crackfoo is there any minimum payout value to be set in case of mining to an altcoin wallet?
I didn't find any such setting...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: NeuroticFish on April 13, 2017, 01:10:06 PM
Payouts are made automatically every 6 hours for all balances above 0.005 and balances more than 0.0005 are paid on Sunday.

it's same for all coins, except I think decred because of high fees, that's why some small miners pick other coins to be paid into.

Yeah, the problem is that 0.005 for some of the coins is basically dust.
Oh well, at least you gave me some info, that there's no other setting, thank you.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 13, 2017, 01:44:12 PM

this site exchanges the dcr for btc, you wont really know how much you get until it happens.. all numbers are estimates..

just noticed you are asking to be paid out in dcr.. not sure why its different.

i think how it works is when you mine dcr on here and ask to be paid out in dcr it still takes the value from the exchange rate.. then it uses your btc to buy back dcr.



Not sure thats accurate. AFAIK, I think it holds DCR at face value. It really shouldn't be different. I'll have to look into when I get home next week.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 13, 2017, 10:13:37 PM
Ok I understand that I need to change to BTC wallet so I get paid for DCR at payout times. My concern is what about what I have mined so far?  Do I have to wait for the payout before I can switch wallet address as that is the user account itself. 


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 13, 2017, 10:44:19 PM
Ok I understand that I need to change to BTC wallet so I get paid for DCR at payout times. My concern is what about what I have mined so far?  Do I have to wait for the payout before I can switch wallet address as that is the user account itself. 
as long as you have mined enough for a payout on a sunday;  and all mined blocks are cleared....  Then just switch addresses to a BTC address.   When the DCR amount gets reached, you'll get your DCR wallet payment like normal;  no need to have something still mining to the wallet.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 13, 2017, 11:00:26 PM
Ok I understand that I need to change to BTC wallet so I get paid for DCR at payout times. My concern is what about what I have mined so far?  Do I have to wait for the payout before I can switch wallet address as that is the user account itself. 
as long as you have mined enough for a payout on a sunday;  and all mined blocks are cleared....  Then just switch addresses to a BTC address.   When the DCR amount gets reached, you'll get your DCR wallet payment like normal;  no need to have something still mining to the wallet.

Thanks..

Ok I think I got it setup right now.

Summary   Miners   Shares   Hashrate*   Reject*
decred   1           0.0063%   4.2 GH/s   

Details   Extra     Algo   Diff   ES**   Hashrate*   Reject*
dual           BTC     decred   1   x   146.6 MH/s

Looks correct right the Extra should report BTC. 


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Gedash on April 13, 2017, 11:32:31 PM
Actually i'm mining in skein pool with 5Gh/s and i need to ask you Just One thing,Will you ever Delete xedos fronte mined cryptos?It is so unprofitable

Very little hashrtae is actually goin on xedos. It's like eating some peanuts while waiting for your supper.
Okay i've looked at this now for many days. Pretty sure we get screwed by coins like xedos.
Without xedos and switching to another algo our shares at skein would stay until the next aurora or digibyte block is found (thats what we want :) ).
As it is now Xedos melts those shares away and we get nearly 0 value from it --> it screws us
I disabled whole algos in my software because of screwcoins like xedos (sadly your pool got some of those), but Skein is just too juicy for it to disable :)

Plz look at Xedos and remove/disable it please. It's a fact it steals people money.
Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 15, 2017, 03:19:22 AM
OK something is seriously wrong here.. The amount I am suppose to be paid goes down after it showed cleared and total unpaid?  WTF?

DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af   0.81469557 DCR
13jVbA4FwX34KfCm1M6Thr8BQMWsnbzf4L   0.00003246 BTC

This was from this morning!  Note over 1.274211 is total cleared.  Yet my balance was 0.94941553 DCR  and now it's mysteriously gone down even more to 0.81469557 DCR?   Now anyone explain to me how I am losing DCR when I have not even been paid yet?  This really looks wrong to me!

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name    Amount    Percent    mBTC    Time    Status
   Decred (decred)   0.795311 DCR   4.155%   5.23140   24h ago   Cleared
   Decred (decred)   0.478900 DCR   2.342%   3.15011   24h ago   Cleared

Balance      0.94941553 DCR

But the cleared is higher than balance?




Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 15, 2017, 03:37:57 AM
OK something is seriously wrong here.. The amount I am suppose to be paid goes down after it showed cleared and total unpaid?  WTF?

DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af   0.81469557 DCR
13jVbA4FwX34KfCm1M6Thr8BQMWsnbzf4L   0.00003246 BTC

This was from this morning!  Note over 1.274211 is total cleared.  Yet my balance was 0.94941553 DCR  and now it's mysteriously gone down even more to 0.81469557 DCR?   Now anyone explain to me how I am losing DCR when I have not even been paid yet?  This really looks wrong to me!

Last 50 Earnings: DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af
   Name    Amount    Percent    mBTC    Time    Status
   Decred (decred)   0.795311 DCR   4.155%   5.23140   24h ago   Cleared
   Decred (decred)   0.478900 DCR   2.342%   3.15011   24h ago   Cleared

Balance      0.94941553 DCR

But the cleared is higher than balance?

what you post here is not real stats, right now it shows:

Balance 0.81469557 DCR
Total Unpaid 0.81566427 DCR
Total Paid 0.94941553 DCR
Total Earned 1.76507980 DCR

your total balance is 1.76507980, and it's bigger than your last 50 earnings,
so this addy prolly has some previous debt/history not seen in recent stats.
if you wanna make correct measurements try mine to a new addy.

all that crap because dcr pool is weak on zpool, very rare blocks, long debts, etc..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 15, 2017, 03:59:55 AM
what you post here is not real stats, right now it shows:

Balance 0.81469557 DCR
Total Unpaid 0.81566427 DCR
Total Paid 0.94941553 DCR
Total Earned 1.76507980 DCR

your total balance is 1.76507980, and it's bigger than your last 50 earnings,
so this addy prolly has some previous debt/history not seen in recent stats.
if you wanna make correct measurements try mine to a new addy.

all that crap because dcr pool is weak on zpool, very rare blocks, long debts, etc..


I'll have to check with polo than maybe they have an issue with deposit showing up.. I've seen it happen once but only once this maybe same case.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 15, 2017, 04:10:23 AM
what you post here is not real stats, right now it shows:

Balance 0.81469557 DCR
Total Unpaid 0.81566427 DCR
Total Paid 0.94941553 DCR
Total Earned 1.76507980 DCR

your total balance is 1.76507980, and it's bigger than your last 50 earnings,
so this addy prolly has some previous debt/history not seen in recent stats.
if you wanna make correct measurements try mine to a new addy.

all that crap because dcr pool is weak on zpool, very rare blocks, long debts, etc..


I'll have to check with polo than maybe they have an issue with deposit showing up.. I've seen it happen once but only once this maybe same case.

https://mainnet.decred.org/address/DsTCsvgwxveiMEYBEBK7pAAojtekY8oE5af

i'm not familiar with decred (imho it's a screwed piece of software).
but you see there's smth wrong with that tx:
value error
" Unparsed address
(Input unconfirmed) "

lets hope polo or crackfoo can sort it out, or network itself, idk


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: molitar on April 15, 2017, 04:32:35 PM
It seemed to been an issue with polo wallet.. It's straightened out now on there end and I got my 1.76 payout.  One bad thing is with the delay in payouts I have no idea how much I am actually making in 24 hours.  Wish pool had an estimator like other sites.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 15, 2017, 08:13:47 PM
Something wrong with the equihash stratum?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 15, 2017, 08:33:34 PM
Something wrong with the equihash stratum?
Send him a tweet;  gets through faster ;)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 16, 2017, 12:02:21 AM
Something wrong with the equihash stratum?
Send him a tweet;  gets through faster ;)

yeah seemed KMD caused another problem. restarted and seems ok now.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 16, 2017, 12:08:14 AM
It seemed to been an issue with polo wallet.. It's straightened out now on there end and I got my 1.76 payout.  One bad thing is with the delay in payouts I have no idea how much I am actually making in 24 hours.  Wish pool had an estimator like other sites.

yeah, it just mostly time time between blocks, then add another 22-24 hours on top of that for the blocks to confirm.  I'll be hanging on to more DCR in the pool wallet to help with more consistent payouts. If another few hundred GH hops on board it would take of the lag as well.

Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 18, 2017, 01:48:59 PM
maxcoin /keccak mining is on 48% rejects, it's not my miner, other pools work fine.

is this showing on the web stats or in your miner?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 18, 2017, 11:18:50 PM
crackfoo,

Any way you can add 24 hour earnings to the graphs/readouts?   I.E.  I want to be able to see how much was earned in the last 24 hour period.  It would be a lot more useful data to me than just the payouts in last 24/hours....   I've always had to eyeball/estimate what the 24 hour earnings were to compare daily profitability on the fly.... as payout info lacks a bit of accuracy to the figure I look for ;)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 19, 2017, 04:10:09 PM
Oh snap.  ZCash (ZEC) is enabled!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 19, 2017, 04:19:21 PM
Oh snap.  ZCash (ZEC) is enabled!

yes, please bring on the equihash! :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 19, 2017, 04:35:49 PM
crackfoo,

Any way you can add 24 hour earnings to the graphs/readouts?   I.E.  I want to be able to see how much was earned in the last 24 hour period.  It would be a lot more useful data to me than just the payouts in last 24/hours....   I've always had to eyeball/estimate what the 24 hour earnings were to compare daily profitability on the fly.... as payout info lacks a bit of accuracy to the figure I look for ;)

I'll see what the dev thinks and can do. I hate jqplot :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: raitpngman on April 19, 2017, 10:53:08 PM
I'd like to give zpool a try, but when I try to register on hashtap it says captcha not available and try in a couple days. Am I doing something wrong?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 19, 2017, 10:55:57 PM
I'll see what the dev thinks and can do. I hate jqplot :)

Leave the graph out... Eff that crap.. I just want a rolling 24 hour number, probably close to the payout list, or even up top in the main earnings section ;)

*edit*

Crackfoo;  any reason this wallet always returns a blank page like its asking you to input a wallet address?

http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 19, 2017, 10:59:45 PM
I'd like to give zpool a try, but when I try to register on hashtap it says captcha not available and try in a couple days. Am I doing something wrong?

No there's nothing wrong on your side. It's still a mystery why my captcha on that screen is broke. The code is the same as the dev who maintains it except for some unknown reason my captcha image started being generated with some sort of empty space at the beginning causing browsers to reject it.

Haven't figured out a workaround yet.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 19, 2017, 11:01:21 PM
No there's nothing wrong on your side. It's still a mystery why my captcha on that screen is broke. The code is the same as the dev who maintains it except for some unknown reason my captcha image started being generated with some sort of empty space at the beginning causing browsers to reject it.

Haven't figured out a workaround yet.

Any chance its tied to an adblock issue?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: raitpngman on April 19, 2017, 11:11:22 PM
No there's nothing wrong on your side. It's still a mystery why my captcha on that screen is broke. The code is the same as the dev who maintains it except for some unknown reason my captcha image started being generated with some sort of empty space at the beginning causing browsers to reject it.

Haven't figured out a workaround yet.

Any chance its tied to an adblock issue?

Doubt it. Tried it on Chrome and Firefox with all extensions off. No luck. Is it working for anyone outside of dev?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 19, 2017, 11:18:11 PM
No there's nothing wrong on your side. It's still a mystery why my captcha on that screen is broke. The code is the same as the dev who maintains it except for some unknown reason my captcha image started being generated with some sort of empty space at the beginning causing browsers to reject it.

Haven't figured out a workaround yet.

Any chance its tied to an adblock issue?

Doubt it. Tried it on Chrome and Firefox with all extensions off. No luck. Is it working for anyone outside of dev?

it used to work fine up to about a month ago. I suspect an OS patch is the culprit but can't find any discrepancies with what the dev has.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 19, 2017, 11:28:40 PM
No there's nothing wrong on your side. It's still a mystery why my captcha on that screen is broke. The code is the same as the dev who maintains it except for some unknown reason my captcha image started being generated with some sort of empty space at the beginning causing browsers to reject it.

Haven't figured out a workaround yet.

Any chance its tied to an adblock issue?

Doubt it. Tried it on Chrome and Firefox with all extensions off. No luck. Is it working for anyone outside of dev?

it used to work fine up to about a month ago. I suspect an OS patch is the culprit but can't find any discrepancies with what the dev has.

try now without entering a code


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: raitpngman on April 19, 2017, 11:31:01 PM
No there's nothing wrong on your side. It's still a mystery why my captcha on that screen is broke. The code is the same as the dev who maintains it except for some unknown reason my captcha image started being generated with some sort of empty space at the beginning causing browsers to reject it.

Haven't figured out a workaround yet.

Any chance its tied to an adblock issue?

Doubt it. Tried it on Chrome and Firefox with all extensions off. No luck. Is it working for anyone outside of dev?

it used to work fine up to about a month ago. I suspect an OS patch is the culprit but can't find any discrepancies with what the dev has.

I'm using Ubuntu


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: raitpngman on April 19, 2017, 11:33:33 PM

try now without entering a code

Thanks! successfully registered.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: raitpngman on April 20, 2017, 01:17:09 AM
I'm trying to set up a new tap (which I assume will allow me to rent hashpower) and am trying to put the server id as "x11.mine.zpool.ca:3533" but it gives me an invalid server url error. What am I doing wrong?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 20, 2017, 02:07:07 AM
you can't mine to zpool from zpool's hashtap if im not mistaken...  That seems redundant and costly....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 20, 2017, 03:09:14 AM
you can't mine to zpool from zpool's hashtap if im not mistaken...  That seems redundant and costly....

That's right. You create taps to other pools.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 23, 2017, 07:23:18 PM
Is something happening with m7m?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 23, 2017, 07:50:45 PM
Is something happening with m7m?


waiting for wallet to get back online


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 23, 2017, 09:04:43 PM
Is something happening with m7m?


waiting for wallet to get back online

Thanks for the heads up.  My miners are still stuck mining m7m though.  They're​ supposed to switch to xevan or yescrypt.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 24, 2017, 12:12:33 AM
Is something happening with m7m?


waiting for wallet to get back online

Thanks for the heads up.  My miners are still stuck mining m7m though.  They're​ supposed to switch to xevan or yescrypt.

Strange to see a double small tx at the same time for my payment today.... wonder what caused the glitch...

came from this wallet: 1PpACtt7wyVL3gwy9TXngv2wG1Vk6dVMby

I was totally confused;  but, I think it's still the proper earnings.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: goo38 on April 24, 2017, 05:43:23 AM
I had a small amount of BTC on the pool that shows was paid out but I didn't receive it.

Last 24 Hours Payouts: 17So1rajjkhancmRJoYnVAVKSp2XT1rtXU
Time   Amount   Tx
7h ago   0.00145419   ...
Total:   0.00145419

The TX link goes to http://zpool.ca/explorer/BTC without actually showing a transaction ID

Not sure what is going on, I haven't had this trouble in the past with payouts. Any ideas?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on April 24, 2017, 07:35:12 AM
This is my output:

99m ago   5.31735560   ...
7h ago   1.68262323   ...
7h ago   7.26431940   f2fe783b77da475ea2849912cf99002a1cd2...

Something is definitely wrong. It started sometimes this weekend when the pool was offline for a short period of time.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: redukt on April 24, 2017, 10:35:58 AM
Still no tx showing after 12 hours. The pending withdrawal shows, but with an ellipsis next to it still. Anyone else still waiting on the withdrawal to process?

Edit: Man crackfoo is fast on the tweets! Sitewide issue with BTC during Sunday withdrawals, tx's will process next time a withdrawal is due.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 24, 2017, 07:44:06 PM
I thought I saw a notification on my phone that crackfoo/zpool was offering a bounty/reward for finding the hacker by their BTC address.  I think it was a tweet, but I can't find it anymore.  Was it related?  And did he find the culprit?

Right now, the web page is displaying the wrong amount of workers, although the hashrate is correct.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on April 24, 2017, 10:58:39 PM
1.7.1-ZPOOL  uploaded  update to:

Tanguy ccminer v2.0 RC3: New decred stratum protocol (used by suprnova and yiimp)
x64 Binary built with CUDA 7.5

https://bitcointalk.org/index.php?topic=1777336.msg17729122#msg17729122 (https://bitcointalk.org/index.php?topic=1777336.msg17729122#msg17729122)

Regards
#Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on April 25, 2017, 01:58:30 AM
Never received my payout Sunday, I sent you a PM Crackfoo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: redukt on April 25, 2017, 02:07:30 AM
Never received my payout Sunday, I sent you a PM Crackfoo

…Sitewide issue with BTC during Sunday withdrawals, tx's will process next time a withdrawal is due.

Apparently BTC wasn't working properly at the time so whenever you are next due a payout the balance should include the missed withdrawal.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 25, 2017, 12:45:48 PM
Is there a BitSend hashrate distrubution chart somewhere like Bitcoin does?  Wondering why blockers are still being found between a few minutes and we haven't found one for 32 hours.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 25, 2017, 01:27:45 PM
Is there a BitSend hashrate distrubution chart somewhere like Bitcoin does?  Wondering why blockers are still being found between a few minutes and we haven't found one for 32 hours.

enough to look at suprnova hashrate:

https://bsd.suprnova.cc/ (https://bsd.suprnova.cc/)

extraction:
https://chainz.cryptoid.info/bsd/#!extraction (https://chainz.cryptoid.info/bsd/#!extraction)

1st place (iDhrSgECLvXxKPoyrGLN59Lh5abt3FwFYX) is suprnova

and i guess this one is zpool:
https://chainz.cryptoid.info/bsd/address.dws?i9td2ig3KYCP1N8zsy9ecJiYRVbUtEvKiL.htm (https://chainz.cryptoid.info/bsd/address.dws?i9td2ig3KYCP1N8zsy9ecJiYRVbUtEvKiL.htm)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: bitfawkes on April 25, 2017, 10:47:45 PM
hello, do you think will be available equihash and sha256 for renting?
they look like rentable but when I try I don't find the field in menu list.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 26, 2017, 04:38:42 PM
I thought I saw a notification on my phone that crackfoo/zpool was offering a bounty/reward for finding the hacker by their BTC address.  I think it was a tweet, but I can't find it anymore.  Was it related?  And did he find the culprit?

Right now, the web page is displaying the wrong amount of workers, although the hashrate is correct.

Yes, a hacker exploited some admin features and walked away with 5.2 BTC. They've since been locked down but it happened just before the Sunday low payouts so there wasn't enough to pay, so this Sunday it'll get re-processed.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Epsylon3 on April 26, 2017, 05:42:08 PM
we should ask the exchanges if there is some place to mark the fraud txs..

sometimes i really feel i construct the knife which will kill me...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on April 26, 2017, 07:36:31 PM
I'll see what the dev thinks and can do. I hate jqplot :)

Leave the graph out... Eff that crap.. I just want a rolling 24 hour number, probably close to the payout list, or even up top in the main earnings section ;)

*edit*

Crackfoo;  any reason this wallet always returns a blank page like its asking you to input a wallet address?

http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

yeah  that is me and on my gui it said I was mining  and all I got was a blank on the poolside. I mined over 12 hours.  then said fuck it and went back to zec on nicehash.

it is a valid address

https://blockchain.info/address/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

i'd like to try mining on the pool again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 26, 2017, 07:45:17 PM
I'll see what the dev thinks and can do. I hate jqplot :)

Leave the graph out... Eff that crap.. I just want a rolling 24 hour number, probably close to the payout list, or even up top in the main earnings section ;)

*edit*

Crackfoo;  any reason this wallet always returns a blank page like its asking you to input a wallet address?

http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

yeah  that is me and on my gui it said I was mining  and all I got was a blank on the poolside. I mined over 12 hours.  then said fuck it and went back to zec on nicehash.

it is a valid address

https://blockchain.info/address/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

i'd like to try mining on the pool again.

there's no problem on pool side, i'v activated that addy thru skein pool, check now.
you prolly set up smth wrong in the miner


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on April 26, 2017, 07:49:06 PM
I just fired it back up


http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


looks to be working.

what should a 1080ti hash at for skein?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on April 26, 2017, 08:01:29 PM
I just fired it back up


http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


looks to be working.

what should a 1080ti hash at for skein?

http://cryptomining-blog.com/8526-mining-performance-of-gtx-1080-ti-with-ccminer-2-0-rc2/ (http://cryptomining-blog.com/8526-mining-performance-of-gtx-1080-ti-with-ccminer-2-0-rc2/)

doesn't matter skein or what, previously you set smth wrong,
it should be c=BTC in password no matter what you mine and how


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 26, 2017, 08:25:41 PM
I just fired it back up


http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


looks to be working.

what should a 1080ti hash at for skein?

Glad to see you here =)   I was baffled at why it would not show the wallet page/earnings info....


Im not sure about the hashrate for the ti, but heres something to compare by:

GTX 960  ~160Mh
GTX 980  ~280Mh
GTX 1060 ~300Mh
GTX 1070 ~420Mh
GTX 1080 ~540Mh

http://cryptomining-blog.com/8526-mining-performance-of-gtx-1080-ti-with-ccminer-2-0-rc2/ (http://cryptomining-blog.com/8526-mining-performance-of-gtx-1080-ti-with-ccminer-2-0-rc2/)

doesn't matter skein or what, previously you set smth wrong,
it should be c=BTC in password no matter what you mine and how
I never trust the cryptominingblog hashrate figures as they are always posted early;  with initial un-streamlined miniers... and its always ending up quite a bit different....
but the ti is new enough, I guess, to take that number with a small grain of salt.

Phil;  he's right;  specifying payout coin is a big deal since the pool can try and autodetect the coin address type and pay out in its detected coin type if not specified;  which the pool detection could be wrong =/


Yes, a hacker exploited some admin features and walked away with 5.2 BTC. They've since been locked down but it happened just before the Sunday low payouts so there wasn't enough to pay, so this Sunday it'll get re-processed.

Damn;   That makes sense on why I got the second tx that day;  my one payout was split into two for some reason that day.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on April 26, 2017, 08:53:24 PM
I am going to use a third btc addy

https://blockchain.info/address/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

it seems to work


http://zpool.ca/?address=16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

the miner shows.

I am pretty  much puzzled  why it did not like that one address.

I cloned the software and added a second pc.  it seems to work .

I am showing over 2.3gh
 
Summary   Miners   Shares   Hashrate*   Reject*
skein   2   17.4241%   2.3 GH/s   0.6%




I just fired it back up


http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


looks to be working.

what should a 1080ti hash at for skein?

Glad to see you here =)   I was baffled at why it would not show the wallet page/earnings info....


Im not sure about the hashrate for the ti, but heres something to compare by:

GTX 960  ~160Mh
GTX 980  ~280Mh
GTX 1060 ~300Mh
GTX 1070 ~420Mh
GTX 1080 ~540Mh

http://cryptomining-blog.com/8526-mining-performance-of-gtx-1080-ti-with-ccminer-2-0-rc2/ (http://cryptomining-blog.com/8526-mining-performance-of-gtx-1080-ti-with-ccminer-2-0-rc2/)

doesn't matter skein or what, previously you set smth wrong,
it should be c=BTC in password no matter what you mine and how
I never trust the cryptominingblog hashrate figures as they are always posted early;  with initial un-streamlined miniers... and its always ending up quite a bit different....
but the ti is new enough, I guess, to take that number with a small grain of salt.

Phil;  he's right;  specifying payout coin is a big deal since the pool can try and autodetect the coin address type and pay out in its detected coin type if not specified;  which the pool detection could be wrong =/


Yes, a hacker exploited some admin features and walked away with 5.2 BTC. They've since been locked down but it happened just before the Sunday low payouts so there wasn't enough to pay, so this Sunday it'll get re-processed.

Damn;   That makes sense on why I got the second tx that day;  my one payout was split into two for some reason that day.

there is some other issue happening I did 2 shares then nothing

 my bat is just about the same as yours

Code:
ccminer.exe -i 22 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje -p 1080TI,c=BTC,skein,stats

Code:
ccminer.exe -i 26 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p i7-920-GPU,c=BTC,skein,stats


I just put in your address and the miner shows for you 1080TI   this is weird I do not understand why it does not like my address

http://i.imgur.com/wNDOD1Q.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 27, 2017, 12:43:45 AM
I myself am perplexed;  I dont know why it didn't like that address.  I see you caught my page when my home internet went down during the night.   Damned bad node at the cell tower gets kinda haywire now and then.

I did notice you are using ccminer 1.7-dev;  I am using plain old 1.7 FWIW.  I am curious on how it only got 2 accepted shares... did the miner app just close out or something?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on April 27, 2017, 01:22:23 AM
I myself am perplexed;  I dont know why it didn't like that address.  I see you caught my page when my home internet went down during the night.   Damned bad node at the cell tower gets kinda haywire now and then.

I did notice you are using ccminer 1.7-dev;  I am using plain old 1.7 FWIW.  I am curious on how it only got 2 accepted shares... did the miner app just close out or something?

I have no idea why it did the two shares.

it showed that it was running and never indicated a problem on my end.

I knew that there was a weird  bug since it did two shares. and dropped on the pool end .

So i tried your address and it worked fine.

I then just used a third address and it is doing very well  4.7gh or so.  it looks like it may earn 10 or 15% more then zec I will spilt hash here and on zec with nice hash for a while.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on April 27, 2017, 02:30:10 AM
I myself am perplexed;  I dont know why it didn't like that address.  I see you caught my page when my home internet went down during the night.   Damned bad node at the cell tower gets kinda haywire now and then.

I did notice you are using ccminer 1.7-dev;  I am using plain old 1.7 FWIW.  I am curious on how it only got 2 accepted shares... did the miner app just close out or something?

I have no idea why it did the two shares.

it showed that it was running and never indicated a problem on my end.

I knew that there was a weird  bug since it did two shares. and dropped on the pool end .

So i tried your address and it worked fine.

I then just used a third address and it is doing very well  4.7gh or so.  it looks like it may earn 10 or 15% more then zec I will spilt hash here and on zec with nice hash for a while.

Yeah, I thought you'd see better returns....

These 10 series cards are good earners on skein.... it's been a gem.

There are some slower days, but overall more good days than bad.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on April 27, 2017, 02:44:37 AM
I myself am perplexed;  I dont know why it didn't like that address.  I see you caught my page when my home internet went down during the night.   Damned bad node at the cell tower gets kinda haywire now and then.

I did notice you are using ccminer 1.7-dev;  I am using plain old 1.7 FWIW.  I am curious on how it only got 2 accepted shares... did the miner app just close out or something?

I have no idea why it did the two shares.

it showed that it was running and never indicated a problem on my end.

I knew that there was a weird  bug since it did two shares. and dropped on the pool end .

So i tried your address and it worked fine.

I then just used a third address and it is doing very well  4.7gh or so.  it looks like it may earn 10 or 15% more then zec I will spilt hash here and on zec with nice hash for a while.

Yeah, I thought you'd see better returns....

These 10 series cards are good earners on skein.... it's been a gem.

There are some slower days, but overall more good days than bad.

I put all four nvidia rigs here just about 6.3gh  my last 1080 ti comes on Friday I will be at 7gh in nvidia rigs.

I will play around to see if the other address will work.  I could see it never working  I don't know how it worked for only two shares on the pool end and never showed the right hash rates .

I wonder if it was that pc and if I tried the other 3 pc's if it would work.

maybe this weekend I will try to figure if it was my gear .


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on April 27, 2017, 03:06:34 AM
Scrypt algo pool is dead!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on April 28, 2017, 12:52:43 AM
18h ago   0.00369618   ...
18h ago   0.00536825   

I did not receive the 0.00369618 BTC


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 28, 2017, 12:40:09 PM
18h ago   0.00369618   ...
18h ago   0.00536825   

I did not receive the 0.00369618 BTC

It's from the failed Sunday payment. It'll actually get resent this Sunday.

Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on April 29, 2017, 06:32:00 AM
We need the API to include current coin profit.



http://i.imgur.com/vE1Gide.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on April 30, 2017, 05:28:08 PM
Looks like my SIB payouts are only half as much as they should be.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on April 30, 2017, 07:34:54 PM
The web site says Magi is worth 0 btc.  Something wrong with the wallet?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Epsylon3 on April 30, 2017, 09:15:35 PM
Looks like my SIB payouts are only half as much as they should be.

They re-enabled the masternodes today (cut the miner block reward by 2)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 30, 2017, 09:29:47 PM
Looks like my SIB payouts are only half as much as they should be.



They were actually twice what they should have been. As Ep says, masternode payments are now enforced.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on April 30, 2017, 09:33:38 PM
The web site says Magi is worth 0 btc.  Something wrong with the wallet?

Seems the markets are offline. Bittrex had wallet maintence... not sure why cryptopia  shows disabled too.

Price will return properly when the markets are back.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 01, 2017, 12:56:08 AM
Last Sunday's payout was resent along with today's

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on May 01, 2017, 09:06:17 AM
hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on May 01, 2017, 01:51:06 PM
There are still some problems with the payouts. This is my output:

62m ago   8.09581180   ...
7h ago   25.71743769   ...
7h ago   8.05710232   48d088f47bd884972b7eeb08488d03eedcb7...

My payout-coin is KMD.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 01, 2017, 02:38:44 PM
hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 01, 2017, 03:39:29 PM
hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers

Can you check payout calculations for this coin.

says it takes 15 hours to mine 12.5 coins.

$0.000788 / btx

maybe the TTF isnt right yet



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 01, 2017, 03:42:25 PM
hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers

Can you check payout calculations for this coin.

not really... check their webpage to see if they have a calculator...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 01, 2017, 04:31:46 PM
What miner and algo does this use?  I keep seeing timetravel but that doesn't seem to work in ccminer.

hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 01, 2017, 04:33:58 PM
What miner and algo does this use?  I keep seeing timetravel but that doesn't seem to work in ccminer.

hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers

I think it's a modified timetravel... Here is their thread which has some miners in it:

https://bitcointalk.org/index.php?topic=1883902.0



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 01, 2017, 05:09:52 PM
Ahh just found an updated ccminer:

https://bitcointalk.org/index.php?topic=1883902.msg18809382#msg18809382

Profits look like they will compete for top spot.  Thanks.

What miner and algo does this use?  I keep seeing timetravel but that doesn't seem to work in ccminer.

hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers

I think it's a modified timetravel... Here is their thread which has some miners in it:

https://bitcointalk.org/index.php?topic=1883902.0




Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 01, 2017, 10:47:38 PM
Throwing everything I have (140MH/s) to see that first block . . . hopefully doesn't take too long and is a decent pay out.

Ahh just found an updated ccminer:

https://bitcointalk.org/index.php?topic=1883902.msg18809382#msg18809382

Profits look like they will compete for top spot.  Thanks.

What miner and algo does this use?  I keep seeing timetravel but that doesn't seem to work in ccminer.

hi crackfoo

could you look into adding    BitCore   BTX   support please it is on :  cryptopia

Regards
Nemo

We've added to zpool now.

Cheers

I think it's a modified timetravel... Here is their thread which has some miners in it:

https://bitcointalk.org/index.php?topic=1883902.0




Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 01, 2017, 11:23:39 PM
Hi

for bitcore algo it does use the timetravel algo so a ccminer .bat should look like this:

ccminerbitcore -r 0 -a timetravel -o stratum+tcp://timetravel.mine.zpool.ca:3556 -u 1D89Ak66QZTgN2Fk2HT14BQMhoE5u5NjbB -p x

this works and runs great !!  but im having hardtime adding to multipoolminer as it uses timetravel algo

this password does not work:

-p c=BTC,myr-gr=67,lyra2v2=37,neoscrypt=1.13,blakecoin=4.7,c11=16.4,groestl=32,blake2s=3.73,x17=10.9,nist5=46.3,skein=512.3,sib=11.8,lbry=272,timetravel=26,decred=2.6,veltor=30,bitcore=28,stats

as it uses timetravel algo not bitcore algo.... pasword would need to look like this:

PASS=c=BTC,myr-gr=67,lyra2v2=37,neoscrypt=1.13,blakecoin=4.7,c11=16.4,groestl=32,blake2s=3.73,x17=10.9,nist5=46.3,skein=512.3,sib=11.8,lbry=272,timetravel=26,decred=2.6,veltor=30,timetravel=28,stats

but i cant have 2x same algo in password as zpool cant tell which is which....

Regards
Nemo
It should work with bitcore in the password since that is what zpool designated it as, though you would use timetravel in the actual algo (-a ).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 02, 2017, 12:06:04 AM
Hi

for bitcore algo it does use the timetravel algo so a ccminer .bat should look like this:

ccminerbitcore -r 0 -a timetravel -o stratum+tcp://timetravel.mine.zpool.ca:3556 -u 1D89Ak66QZTgN2Fk2HT14BQMhoE5u5NjbB -p x

this works and runs great !!  but im having hardtime adding to multipoolminer as it uses timetravel algo

this password does not work:

-p c=BTC,myr-gr=67,lyra2v2=37,neoscrypt=1.13,blakecoin=4.7,c11=16.4,groestl=32,blake2s=3.73,x17=10.9,nist5=46.3,skein=512.3,sib=11.8,lbry=272,timetravel=26,decred=2.6,veltor=30,bitcore=28,stats

as it uses timetravel algo not bitcore algo.... pasword would need to look like this:

PASS=c=BTC,myr-gr=67,lyra2v2=37,neoscrypt=1.13,blakecoin=4.7,c11=16.4,groestl=32,blake2s=3.73,x17=10.9,nist5=46.3,skein=512.3,sib=11.8,lbry=272,timetravel=26,decred=2.6,veltor=30,timetravel=28,stats

but i cant have 2x same algo in password as zpool cant tell which is which....

Regards
Nemo
It should work with bitcore in the password since that is what zpool designated it as, though you would use timetravel in the actual algo (-a ).

The algo is different than the other timetravel. Check their thread I posted before for links to the miners for this algo "bitcore".


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on May 02, 2017, 12:10:41 AM
NemosMiner-v1.7.2-ZPOOL uploaded:

support for BitCore   BTX  

thanks to: https://github.com/Nigho/ccminer (https://github.com/Nigho/ccminer) compiled with vs2013 cuda 8.0 compute 5.2 for pascal cards 64bit (ccminerbitcore.exe)

Best Regards
Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 02, 2017, 01:56:58 AM
MAX was delisted from Bittrex so we've dropped it and the keccak algo.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 02, 2017, 02:25:18 AM

The algo is different than the other timetravel. Check their thread I posted before for links to the miners for this algo "bitcore".
For some weird reason they left it as timetravel and not timetravel10 in the version a ccminer that can mine BTX. This ccminer version does not work on regular timetravel.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 02, 2017, 02:27:32 AM
MAX was delisted from Bittrex so we've dropped it and the keccak algo.
I don't know if you noticed that UNIT got delisted from Bittrex and the Yobit wallet has been in permanent maintenance for the past 6 months.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 02, 2017, 02:27:42 AM

The algo is different than the other timetravel. Check their thread I posted before for links to the miners for this algo "bitcore".
For some weird reason they left it as timetravel and not timetravel10 in the version a ccminer that can mine BTX. This ccminer version does not work on regular timetravel.

ahh ok... well I guess technically it is "timetravel10"


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 02, 2017, 02:29:55 AM
MAX was delisted from Bittrex so we've dropped it and the keccak algo.
I don't know if you noticed that UNIT got delisted from Bittrex and the Yobit wallet has been in permanent maintenance for the past 6 months.

ahh crap. nope.

Thanks for the heads up.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: reachr on May 02, 2017, 10:39:26 AM
crackfoo your reward for arcticcoin is wrong.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on May 02, 2017, 05:00:47 PM
KMD payouts are still broken:

4h ago   19.44883841   ...
10h ago   32.02063232   ...
34h ago   8.05710232   48d088f47bd8849

Is this a problem with KMD or a more general one? Should i switch back to BTC?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 02, 2017, 05:11:39 PM
KMD payouts are still broken:

4h ago   19.44883841   ...
10h ago   32.02063232   ...
34h ago   8.05710232   48d088f47bd8849

Is this a problem with KMD or a more general one? Should i switch back to BTC?
looks like there was a duplicated address. Fixed.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flowjob on May 02, 2017, 05:55:24 PM
KMD payouts are still broken:

4h ago   19.44883841   ...
10h ago   32.02063232   ...
34h ago   8.05710232   48d088f47bd8849

Is this a problem with KMD or a more general one? Should i switch back to BTC?
looks like there was a duplicated address. Fixed.

Wow, that was fast.

I've got my KMD payout:
40m ago   74.21159194   8fd53a3b242

Thank you.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 02, 2017, 09:38:19 PM
Any chance on narrowing down why the pool no longer displays connected miner info after they have long uptimes?

http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN This one shows one miner;  but the total hashrate clearely shows the extra 1.1Gh..

http://zpool.ca/?address=1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP One of my machines in SF is 24/7 uptime in a remote spot;  I never know if it goes down because I can't go reset at a whim (too far to drive)...  I only know if its online by turning the rest of this account's miners off and watching the hashrate plummet and stay at the expected value.

I don't remember this being an issue ~8 mo ago.... so yeah.  I know it's a tough one to track down.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 02:46:25 AM

It does not appear to be switching.

Also, is there a formula for calculating the profitability numbers

I see scrypt is reference at 1. XXX below , is it a ratio of what my actual scrypt hash is to skein?


Code:

SET PASS=RIG02,c=BTC,skein=XXX,blake2s,nist5,c11,lyra2v2,stats
:start
ECHO multi-algo Switch....
ccminerAlexis78.exe -r 0 -a skein -i 26 -o stratum+tcp://skein.mine.zpool.ca:4933 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a blake2s -i 31 -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a nist5 -i 20 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a c11 -i 21 -o stratum+tcp://c11.mine.zpool.ca:3573 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a lyra2v2 -i 21 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u %ADDY% -p %PASS%
GOTO start



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 02:49:18 AM

It does not appear to be switching.

Also, is there a formula for calculating the profitability numbers

I see scrypt is reference at 1. XXX below , is it a ratio of what my actual scrypt hash is to skein?


Code:

SET PASS=RIG02,c=BTC,skein=XXX,blake2s,nist5,c11,lyra2v2,stats
:start
ECHO multi-algo Switch....
ccminerAlexis78.exe -r 0 -a skein -i 26 -o stratum+tcp://skein.mine.zpool.ca:4933 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a blake2s -i 31 -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a nist5 -i 20 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a c11 -i 21 -o stratum+tcp://c11.mine.zpool.ca:3573 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a lyra2v2 -i 21 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u %ADDY% -p %PASS%
GOTO start


Mine seem to be switching...

Yes, well I've set all the normalization to 1 for all algos. I'm not positive, but essentially, you can put in a value thats equivalent to the hash rate your rigs gets on each algo.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 03, 2017, 02:59:53 AM

It does not appear to be switching.

Also, is there a formula for calculating the profitability numbers

I see scrypt is reference at 1. XXX below , is it a ratio of what my actual scrypt hash is to skein?


Code:

SET PASS=RIG02,c=BTC,skein=XXX,blake2s,nist5,c11,lyra2v2,stats
:start
ECHO multi-algo Switch....
ccminerAlexis78.exe -r 0 -a skein -i 26 -o stratum+tcp://skein.mine.zpool.ca:4933 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a blake2s -i 31 -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a nist5 -i 20 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a c11 -i 21 -o stratum+tcp://c11.mine.zpool.ca:3573 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a lyra2v2 -i 21 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u %ADDY% -p %PASS%
GOTO start


Its fun seeing my code snippetts everywhere XD

your batch has no normalization in it whatsoever;  you have to do it for all algos that you have in your batch, not just one as a reference;  as crackfoo explained, poolside they are all treated as one;  which is smart as there is a HUGE difference between nvidia and AMD miner hashrates.... it caused quite a bit of confusion for people in the past.

Check the link in my sig for the batch;  there's a link to the original batch post as well in that post...  In those should be a link to some normalization values I have run myself  and lots of good info;  Just pick a normalization that's close to the caliber of your card you are using.  For instance if you have a 970, you could use my 960 or 980 numbers, not the 1070 numbers... etc.  *edit* just looked, its directly in my sigs link, not 2 links deep.

once all of the algos have an "equals" value assigned to them, you will see the profit switching more where it should be.

Thinking about it now;  I should double check that I have at least some sort of normalization forced in my batch posted presently;  which I think is true... gonna double check just to be sure =)  I think I posted it before the change on poolside to 1 happened.  I checked, its good.  Notes at bottom of batch as to what normalization it has.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 03:06:00 AM

It does not appear to be switching.

Also, is there a formula for calculating the profitability numbers

I see scrypt is reference at 1. XXX below , is it a ratio of what my actual scrypt hash is to skein?


Code:

SET PASS=RIG02,c=BTC,skein=XXX,blake2s,nist5,c11,lyra2v2,stats
:start
ECHO multi-algo Switch....
ccminerAlexis78.exe -r 0 -a skein -i 26 -o stratum+tcp://skein.mine.zpool.ca:4933 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a blake2s -i 31 -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a nist5 -i 20 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a c11 -i 21 -o stratum+tcp://c11.mine.zpool.ca:3573 -u %ADDY% -p %PASS%
ccminerAlexis78.exe -r 0 -a lyra2v2 -i 21 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u %ADDY% -p %PASS%
GOTO start


Its fun seeing my code snippetts everywhere XD

your batch has no normalization in it whatsoever;  you have to do it for all algos that you have in your batch, not just one as a reference;  as crackfoo explained, poolside they are all treated as one;  which is smart as there is a HUGE difference between nvidia and AMD miner hashrates.... it caused quite a bit of confusion for people in the past.

Check the link in my sig for the batch;  there's a link to the original batch post as well in that post...  In those should be a link to some normalization values I have run myself  and lots of good info;  Just pick a normalization that's close to the caliber of your card you are using.  For instance if you have a 970, you could use my 960 or 980 numbers, not the 1070 numbers... etc.

once all of the algos have an "equals" value assigned to them, you will see the profit switching more where it should be.

Thinking about it now;  I should double check that I have at least some sort of normalization forced in my batch posted presently;  which I think is true... gonna double check just to be sure =)  I think I posted it before the change on poolside to 1 happened.  I checked, its good.  Notes at bottom of batch as to what normalization it has.

and I found where they were referencing on the pool. I had an old table saying we did the normalizations when we actually don't.

http://www.zpool.ca/site/multialgo


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 03, 2017, 03:16:02 AM
There's a new addition to my miner tools.

Put it together for a member here;  whom of course;  never came through with the reward.... I think because he wanted it to have malware like properties (able to launch as a service without any admin rights on any machines)....  Not something I'll do for people....   but I did manage to easily accomplish what he originally wanted to happen... sooooo....

Here it is advertised for everyone to use freely.  I'm not expecting anything but it to be used =)

New silent miner launch via batch.  You can launch your batch file silently (no userland windows) and the batch in turn launches the miner app in the background outside of the userland as well.  Good for silent background instances.

Relies on a one lined .vbs file, which is mind numbingly simple.


It's in the batch link in my sig.  Enjoy guys =)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 03:20:04 AM
@JaredKaragen Thank you.

I actually didn't see your code until now, which i'm totally glad I did because its going to open up my world! I read through your posts and I was trying to understand the normalization and I still have one question. Do I put them all in MH/s or do I put them in the unit which is multiplied by the profit factor? for example should I put the blake algos in GH/s?


Code:
SET PASS=RIG02,c=BTC,skein=4500,blake2s=35,nist5=423,c11=146,lyra2v2=330,stats

It would be really nice if it passed a var when it disconnected you, it could tell you the which algo is the most prof

Thanks again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 03:23:34 AM

and I found where they were referencing on the pool. I had an old table saying we did the normalizations when we actually don't.

http://www.zpool.ca/site/multialgo

Yes, I saw that table and that is why I did not have any normalizations in there at first.

Thanks again for everyones help


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 03, 2017, 03:28:09 AM
do em as the pool reads em.

mBTC/MH/day, per GH for sha256 & blake algos, kSol. for equihash (taken from top right webpage pane)

so if you make 300 sol;  you are .3ksol  so 0.3...

Here's the names added next to the normalizations for my 1070 in my gaming PC:

GTX 1070 FTW DT 8G


x17=7.7Mh
nist5=41.9Mh
x11evo=11.8Mh
sib=1.7Mh
x13=10.3Mh
x14=9.6Mh
x15=8.2Mh
x11=12.1Mh
qubit=18.5Mh
lyra2v2=37.2Mh
blakecoin=4.1Mh
blake2s=1.7Gh
neoscrypt=0.922Mh
decred=2.2Gh
skein=400.0Mh
lbry=270.0Mh
c11=12.74Mh
groestl=37.1Mh
quark=18.4Mh
keccak=550.0Mh
myr-gr=55.9Mh

When doing cpu based coins, I always did it the same so you get numbers like 0.0023 and 0.00087.  As long as they are relative to each other (in this case by GH/sec or MH/sec... then you are good to go.  

If you normalizes blake as Mh/s... you would end up with:
blake2s=17000.0;  which is totally not correct since the pool calcs it via GH =)

*edit* in my sig links, you can also find step by step instructions on how to find the actual normalization numbers (hashrates) of each algo on your own card/miner.

Glad to help sir.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 03:34:11 AM
Thanks JK.

re, workers. I'm still a bit miffed why this happens to some miners. I've yet to see any missing or ghost miners hanging around on my wallet address. That table is really a simple query pulling all the entries from the workers db that match the ID for your wallet. And right now, the oldest worker in the db is from GMT: Mon, 01 May 2017 09:08:42 GMT


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 03, 2017, 03:46:13 AM
Thanks JK.

re, workers. I'm still a bit miffed why this happens to some miners. I've yet to see any missing or ghost miners hanging around on my wallet address. That table is really a simple query pulling all the entries from the workers db that match the ID for your wallet. And right now, the oldest worker in the db is from GMT: Mon, 01 May 2017 09:08:42 GMT

if it makes any difference;  I dont think its the miner app cause it did it with ccminer 1.7, 1.8 and even alexis78 just the other day.   It's not a super imperative thing, but my friend who has multiple GH of machines;  has trouble ID'ing which one went offline sometimes.  He split the machines up into different accounts just so that if one drops, he can more easily jump on it.... kinda sucks though because it adds to the TX bulk and associated fees.   Ill give him the heads up that you've been looking at it though.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 04:10:00 PM
Can anyone explain what happened here. It appears my balance dropped without a payout.


http://i.imgur.com/PZdQe3y.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 03, 2017, 04:26:25 PM
Can anyone explain what happened here. It appears my balance dropped without a payout.

your balance is green (confirmed and cleared),
blue is estimated balance, actually it's nothing until it becomes real one.
if you ask why estimated balance gone down -
because market prices aren't constant, orphan blocks happen, forks and reorgs, etc...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 05:12:23 PM
Can anyone explain what happened here. It appears my balance dropped without a payout.

your balance is green (confirmed and cleared),
blue is estimated balance, actually it's nothing until it becomes real one.
if you ask why estimated balance gone down -
because market prices aren't constant, orphan blocks happen, forks and reorgs, etc...

thats right. market prices effect the estimate. Unless it's a strong market, you'll see that estimate fluctuate especially when I'm selling my bags.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 05:25:39 PM
I've disabled the yobit exchange for now since they pay shit for BTC tx fee's and now taking more than 24hours to confirm. Still waiting on 4 tx's. Coins that are found only on yobit will show no profitability.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 05:29:53 PM
Can anyone explain what happened here. It appears my balance dropped without a payout.

your balance is green (confirmed and cleared),
blue is estimated balance, actually it's nothing until it becomes real one.
if you ask why estimated balance gone down -
because market prices aren't constant, orphan blocks happen, forks and reorgs, etc...

thats right. market prices effect the estimate. Unless it's a strong market, you'll see that estimate fluctuate especially when I'm selling my bags.

I was actually thinking that. This is why I don't like to mine coins which have long block times.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 05:30:58 PM
Can anyone explain what happened here. It appears my balance dropped without a payout.

your balance is green (confirmed and cleared),
blue is estimated balance, actually it's nothing until it becomes real one.
if you ask why estimated balance gone down -
because market prices aren't constant, orphan blocks happen, forks and reorgs, etc...

thats right. market prices effect the estimate. Unless it's a strong market, you'll see that estimate fluctuate especially when I'm selling my bags.

I was actually thinking that. This is why I don't like to mine coins which have long block times.



yeah I hear ya, but when the BTC starts rolling in and you mine consistently, it'll make you happier :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 05:32:55 PM
Another question.

When I mine I submit shares which are accepted.

Is my % of the reward based on the # of accepted shares / total shares required to find the block?

Is hash rate used in the calculations at all?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 05:34:12 PM
Have you thought about adding an ethereum pool?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 03, 2017, 05:42:45 PM
Another question.

When I mine I submit shares which are accepted.

Is my % of the reward based on the # of accepted shares / total shares required to find the block?

Is hash rate used in the calculations at all?

your hash rate on pool side is actually calculated from shares afaik :)
in general, hash rate is miner software / gpu engine characteristic.
pool can't see what's going on in your miner, it gives work share, and gets it solved.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 03, 2017, 06:24:17 PM
Have you thought about adding an ethereum pool?

if more miners were on equihash, decred & lbry I might consider it but it's not worth the effort.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 03, 2017, 09:36:44 PM
I've disabled the yobit exchange for now since they pay shit for BTC tx fee's and now taking more than 24hours to confirm. Still waiting on 4 tx's. Coins that are found only on yobit will show no profitability.

What coins are they? I noticed I have a long flatline

http://i.imgur.com/R5IgBRw.png

http://i.imgur.com/8PIfaRA.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 03, 2017, 09:56:11 PM
I've disabled the yobit exchange for now since they pay shit for BTC tx fee's and now taking more than 24hours to confirm. Still waiting on 4 tx's. Coins that are found only on yobit will show no profitability.

What coins are they? I noticed I have a long flatline


none of these, check pools for those with zeroes in profit value (excl. myr in sha256)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 04, 2017, 01:04:48 AM
Zpool.ca Normalization Tool for Password settings

Check out the sheet I made to build your password field for which algos you want to run when using the multi algo method here http://zpool.ca/site/multialgo

This also normalizes based on energy usage for each algo. If you do not want to use this feature just leave watts all the same.

You can change any cell with a green background

1. Put a 1 or 0 if you want to include the algo in your password
2. Put in the intensity value for each algo you want.
3. Put in your hash rates, can be per card or per rig
3. Put in power usage



Zpool.ca Normalization Tool for Password settings (https://docs.google.com/spreadsheets/d/1Exn5qjEiqaK-m4owfItQcsS-VOw9ETO5rYYIHGxDUTY/edit?usp=sharing)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 04, 2017, 01:49:49 AM
Zpool.ca Normalization Tool for Password settings

Check out the sheet I made to build your password field for which algos you want to run when using the multi algo method here http://zpool.ca/site/multialgo

This also normalizes based on energy usage for each algo. If you do not want to use this feature just leave watts all the same.

You can change any cell with a green background

1. Put a 1 or 0 if you want to include the algo in your password
2. Put in the intensity value for each algo you want.
3. Put in your hash rates, can be per card or per rig
3. Put in power usage



Zpool.ca Normalization Tool for Password settings (https://docs.google.com/spreadsheets/d/1Exn5qjEiqaK-m4owfItQcsS-VOw9ETO5rYYIHGxDUTY/edit?usp=sharing)

The benchmark part of zpool can also be helpful to get some rates users are getting with their cards and CPUS:

http://ww.zpool.ca/bench

PS, I did just happen to see a bunch of reports about some worms in google doc links so just be cautious folks. Not saying that link is/has one, but just in general, be vigilant.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 04, 2017, 02:31:53 AM
If the .xls file is small enough you could paste as a code snippet.

Or better yet; upload the file to mega; that way it can be downloaded through a file inspection service easily ;)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 04, 2017, 04:13:41 AM
If the .xls file is small enough you could paste as a code snippet.

Or better yet; upload the file to mega; that way it can be downloaded through a file inspection service easily ;)

http://www.megafileupload.com/26j7x/Zpool_Normalization_Value.xlsx (http://www.megafileupload.com/26j7x/Zpool_Normalization_Value.xlsx)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SFR10 on May 04, 2017, 06:08:48 AM
Wanted to ask if it's possible to request for an increase in threshold (for me only)? At the moment, I'm mining on my 1070 with intensity set to 20 but wanted to lower it to 10/11 intensity (after getting my 1st payout) so it wouldn't put that much of pressure on the card and at the same time mine a little bit (like a hobby).
The problem is, if I lower the intensity, I'm going to end up with many small payouts of 0.0005 or more (every Sunday) and don't want to compile BTCitcoins on that way since I'll end up with huge transaction fees (whenever I send).

Is it possible to request for my threshold to bump up to 0.01 (after receiving my 1st payout, which most likely is this coming Sunday)? I don't mind getting paid once every 2/3 weeks.
Code:
http://www.zpool.ca/?address=1Gm5K2H2fjD2oiTn4rWC5GwQMn2xMUBc5g

Update:
You pay to tx not rx.

The pool does the tx; your covered.  It's an expected expenditure.
Yes, I know that. What I'm meant is about receiving too many of these transactions (0.0005 and such) and as result, whenever I want to send someone a certain amount of BTCitcoins, the transaction size increases (due to a lot of small inputs) and as result I'll be forced to pay more fee.

Update 2:
why not use poloniex addy ? or a payout coin other than btc
Then I have to go through two exchanges, just to convert it to my local currency (one exchange to BTCitcoin and the other to fiat).
I only use local exchanges, due to trust issues and also most other known exchanges aren't supported (due to location).

Update 3:
My solution is a coinbase address for rx.  Works like a champ for me.
Unfortunately coinbase isn't an option for me (due to my location).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 04, 2017, 06:31:39 AM
You pay to tx not rx.

The pool does the tx; your covered.  It's an expected expenditure.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 04, 2017, 06:39:18 AM
Wanted to ask if it's possible to request for an increase in threshold (for me only)?

why not use poloniex addy ? or a payout coin other than btc


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 04, 2017, 07:36:24 AM
Gotcha.

My solution is a coinbase address for rx.  Works like a champ for me.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 04, 2017, 03:48:05 PM
I've disabled the yobit exchange for now since they pay shit for BTC tx fee's and now taking more than 24hours to confirm. Still waiting on 4 tx's. Coins that are found only on yobit will show no profitability.

yobit and associated coins back online.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 04, 2017, 11:52:04 PM
disable quark/QRK probably we are mining on a fork.


I was just going to say the times are wrong which is calculating the profit way wrong.

http://i.imgur.com/cC2SKsv.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 05, 2017, 12:11:03 AM
disable quark/QRK probably we are mining on a fork.


I was just going to say the times are wrong which is calculating the profit way wrong.

http://i.imgur.com/cC2SKsv.png

 *** estimated average time to find a block at full pool speed


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 05, 2017, 12:17:03 AM
disable quark/QRK probably we are mining on a fork.

I was just going to say the times are wrong which is calculating the profit way wrong.


https://github.com/tpruvot/yiimp/blob/next/web/yaamp/core/functions/yaamp.php#L284 (https://github.com/tpruvot/yiimp/blob/next/web/yaamp/core/functions/yaamp.php#L284)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 05, 2017, 07:07:30 AM
Can anyone help me understand the difference between the hash rates on my miner and the hash rates displayed on the pool?

I think pool is a 5 minute average. The miner was running for much longer than 5 minutes.

Is there anything I can do to get the pool to match? I know the pool shows % share, is there a way the pool can display accepted shares?



http://i.imgur.com/CEGKJfV.png

http://i.imgur.com/WyNMbIt.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 05, 2017, 07:51:00 AM
Can anyone help me understand the difference between the hash rates on my miner and the hash rates displayed on the pool?

I think pool is a 5 minute average. The miner was running for much longer than 5 minutes.

Is there anything I can do to get the pool to match? I know the pool shows % share, is there a way the pool can display accepted shares?



http://i.imgur.com/CEGKJfV.png

http://i.imgur.com/WyNMbIt.png

I dont think the pool shows its calculation.  you should really read up on how the pools calculate hashrate based on share size/frequency....  then if brave enough look at the yiimp(i think, or is it yaamp?) pool code to see how its actually being calculated.  It varies in the exact same way that luck to find a high share varies.   "Statistical probability" averaged over X time.....

I typically see my hashrate fall within the guidelines.  Sometimes you are fed a run of lucky shares and hashrate reports high for a while.... that's luck...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 05, 2017, 02:23:20 PM
Can anyone help me understand the difference between the hash rates on my miner and the hash rates displayed on the pool?

I think pool is a 5 minute average. The miner was running for much longer than 5 minutes.

Is there anything I can do to get the pool to match? I know the pool shows % share, is there a way the pool can display accepted shares?


the only true hashrate is your miner's one,
there's no need to match, pool "hashrate" value is useful to watch for problems,
e.g. if it dropped too much for quite a while maybe smth wrong with pool, miner or network


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 05:01:01 PM
Hey

Ive never used api before. But i wanna rent some hashpower.

I read the api page. But not completely sure what to do.

It looks like JSON or something to me

Where/How do i use it?



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 06, 2017, 05:06:11 PM
Hey

Ive never used api before. But i wanna rent some hashpower.

I read the api page. But not completely sure what to do.

It looks like JSON or something to me

Where/How do i use it?



First you need to create a HashTap account:

http://zpool.ca/renting

Then add some pools for the algos you want to rent.

Then the API can be used to control your rentals.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 05:16:48 PM


First you need to create a HashTap account:

http://zpool.ca/renting

Then add some pools for the algos you want to rent.

Then the API can be used to control your rentals.



Okay thanks.

I made an account.

But where do i add the pool details?

Like i said hehe..i never used api before...i know how to add pools to my baikal miner..and connect to and mine with them..

Also...i intend to point the hashpower to a worker at Suprnova.....is that possible?

i just need to know where to add the pools, then where to put the api settings....i never had to do that before...coz im new to this...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 05:21:35 PM
oh wait....do i have to add btc to the account first.....before those "options" become visible ?

I knew this day would come....when id finally have to know what the "api" thing is lol


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 05:46:29 PM
ahh...all good...

Ill give that nicehash one a shot first..

Looks pretty straight foward , just like my baikal miner pool settings ..without the api stuff hehe ^^"


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 06, 2017, 06:06:41 PM
ahh...all good...

Ill give that nicehash one a shot first..

Looks pretty straight foward , just like my baikal miner pool settings ..without the api stuff hehe ^^"

funny, you don't need api to use zpool either


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 06:09:04 PM
haha..looks like u need to be psychic tho...if u never done it before lol

fk that..i just want to be a customer..not be treated like a fkn idiot.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 06, 2017, 06:11:50 PM
haha..looks like u need to be psychic tho...ive u never done it before lol

fk that..i just want to be a customer..not be treated like a fkn idiot.

u need to throw some btc to both zpool and nicehash if you want to be a "customer", that's all


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 06:19:11 PM
dont worry..ive already "thrown" some btc at nice hash.

I just thought it would make sense...that there would be something on the account page...where u throw in some numbers...so u can "see" how much btc u wanna put in...before u actually put it in...

If all i had to do was put in some btc...to see the "options"....just needed to say that..

But when i get sent to the "api" page...never having dealt with api stuff yet...

..and all i see is JSON properties/values....

What the hell?...where am i supposed to put those values?

nvm...dont wanna start anything here..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 06:42:45 PM
And btc needs fkn segwit as well lol

how many hours does it need to take to confirm a single , rediculous transaction? sheesh..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 06, 2017, 06:46:06 PM
dont worry..ive already "thrown" some btc at nice hash.

I just thought it would make sense...that there would be something on the account page...where u throw in some numbers...so u can "see" how much btc u wanna put in...before u actually put it in...

If all i had to do was put in some btc...to see the "options"....just needed to say that..

But when i get sent to the "api" page...never having dealt with api stuff yet...

..and all i see is JSON properties/values....

What the hell?...where am i supposed to put those values?

nvm...dont wanna start anything here..

yeah, you definitely not supposed to be here lol



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 06:48:41 PM
Yep...just keep talking

Id love to keep this going...so that "all" the newcomers know "not" to bother with "this" one lol

Lets keep bumping this thread lol


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 06, 2017, 06:50:27 PM
Yep...just keep talking

Id love to keep this going...so that "all" the newcomers know "not" to bother with "this" one lol

Lets keep bumping this thread lol

yeah, i know it's good nicehash trolling but it's of no use at all,
hashtap is not popular thing, just an option


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 06:55:10 PM
fk nicehash

im only going there, coz when u hit a "wall" with something...then go ask about it....at least u dont get "support" from ppl with "Superiority Complex" lol


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 06, 2017, 07:06:12 PM
fk nicehash

im only going there, coz when u hit a "wall" with something...then go ask about it....at least u dont get "support" from ppl with "Superiority Complex" lol

you asked about zpool api - the answer is you don't need zpool api, as you don't need nicehash api,
if you simply wanna rent some hashes.
the only way to test the service is read the rules, put some btc (not much) and try it,
no matter what you see in its frontend, the real use will be not as expected.

and yes, i'm superior lol


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on May 06, 2017, 07:09:16 PM


you asked about zpool api - the answer is you don't need zpool api, as you don't need nicehash api,
if you simply wanna rent some hashes.
the only way to test the service is read the rules, put some btc (not much) and try it,
no matter what you see in its frontend, the real use will be not as expected.

and yes, i'm superior lol


Great! Thank You! =)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 07, 2017, 04:04:54 PM
Any new coins / algos getting added soon?

Request
Litecoin(LTC)
Sia(SC) , Blake2b
PascalLite(PASL)
Pascalcoin(PASC)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 07, 2017, 04:13:38 PM
Any new coins / algos getting added soon?

Request
Litecoin(LTC)
Sia(SC) , Blake2b
PascalLite(PASL)
Pascalcoin(PASC)


LTC lol ?
Coinotron: LTC  35.9GH  TTF~11h
Zpool will need a week or more to find 1 block


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 07, 2017, 04:27:46 PM
Any new coins / algos getting added soon?

Request
Litecoin(LTC)
Sia(SC) , Blake2b
PascalLite(PASL)
Pascalcoin(PASC)


LTC lol ?
Coinotron: LTC  35.9GH  TTF~11h
Zpool will need a week or more to find 1 block


No not all, cept will LTC, someday maybe. As desync alluded to, wed need 30-40GH for me to click it on. Drop 30-40GH on the pool and I'll gladly enable it ;)

Although, we don't support segwit yet anyway.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 07, 2017, 06:07:46 PM
1GH is getting turned on tomorrow.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: goo38 on May 07, 2017, 06:32:10 PM
I wanted to post thanks, my last payment included the missing amount from two weeks ago.  :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on May 08, 2017, 01:57:09 PM
I am loving zpool more and more these days, and I'm pointing all of my miners in your direction :D

One thing I'd love to see is the hashrate of my miner through the API.
Right now I can't see a way to get that information, and I've having to check that the unpaid balance is increasing to know that a miner is still running.

Is there any chance that could be added please?

Thank you :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 08, 2017, 03:43:10 PM
Look at the WalletEx API and watch the Accepted rate incrementing. You can see it per miner as well.  Plus the miner won't show up here if its not connect to the stratum.

http://www.zpool.ca/api/walletEx?address=

Code:
{  
   "currency":"BTC",
   "unsold":0,
   "balance":0,
   "unpaid":0,
   "paid":0,
   "total":0,
   "miners":[  
      {  
         "version":"ccminer\/8.05-KlausT",
         "password":"sm1,c=BTC,d=1",
         "ID":"",
         "algo":"neoscrypt",
         "difficulty":768,
         "subscribe":1,
         "accepted":5268493.216,
         "rejected":14660155.037
      },
      {  
         "version":"ccminer\/8.05-KlausT",
         "password":"sm2,c=BTC,d=1",
         "ID":"",
         "algo":"neoscrypt",
         "difficulty":256,
         "subscribe":1,
         "accepted":2469605.737,
         "rejected":14660155.037
      }
   ]
}

I am loving zpool more and more these days, and I'm pointing all of my miners in your direction :D

One thing I'd love to see is the hashrate of my miner through the API.
Right now I can't see a way to get that information, and I've having to check that the unpaid balance is increasing to know that a miner is still running.

Is there any chance that could be added please?

Thank you :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 08, 2017, 03:47:21 PM
I am loving zpool more and more these days, and I'm pointing all of my miners in your direction :D

One thing I'd love to see is the hashrate of my miner through the API.
Right now I can't see a way to get that information, and I've having to check that the unpaid balance is increasing to know that a miner is still running.

Is there any chance that could be added please?

Thank you :)

I'll check into it.

Thanks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on May 08, 2017, 05:43:43 PM
I am loving zpool more and more these days, and I'm pointing all of my miners in your direction :D

One thing I'd love to see is the hashrate of my miner through the API.
Right now I can't see a way to get that information, and I've having to check that the unpaid balance is increasing to know that a miner is still running.

Is there any chance that could be added please?

Thank you :)

I'll check into it.

Thanks!

Thank you! :)

It would be awesome to have hashrate as then it can be checked via the api, and the miner can be restarted if it drops below a certain thresh hold


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 08, 2017, 08:31:43 PM
Looks like the x14 algo (BERN) has disappeared again.  I've seen it do this before, it throws my Baikals offline when they can't find it.  I removed it from them for now, so just a heads up.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 08, 2017, 08:50:07 PM
Please look at Stable Coin for Scrypt.

it doesnt add up.


Can I stop mining a certain coin?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 08, 2017, 09:52:06 PM
Looks like the x14 algo (BERN) has disappeared again.  I've seen it do this before, it throws my Baikals offline when they can't find it.  I removed it from them for now, so just a heads up.

Hrmm, my baikals are still going ok.

It's offline cause BERN lost all it's peers again. It's been a PITA lately for this reason. I don't have the time to mess with it again to find peers but when I do, I'll put it back...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 08, 2017, 09:52:46 PM
Please look at Stable Coin for Scrypt.

it doesnt add up.


Can I stop mining a certain coin?

doesn't add up? What do you mean? I've disabled it on stratum until I look into it but it's still on the same chain as cryptopia...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 08, 2017, 09:55:18 PM
Just a heads up, this is the type of support ticket that... well... gets you no support and your accounts locked/banned.

https://i.snag.gy/Hn4LKI.jpg

I do my best to resolve all issues, but if you respond with that. I don't have time for it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 08, 2017, 09:58:59 PM
Please look at Stable Coin for Scrypt.

it doesnt add up.


Can I stop mining a certain coin?

doesn't add up? What do you mean? I've disabled it on stratum until I look into it but it's still on the same chain as cryptopia...


For some reason it keeps saying its profitability is higher than it really is. like a lot higher. I saw most the network hash on it and it was at most getting a bock every minute. I had 33% of the share and getting very very little.

http://i.imgur.com/NTwvN5s.png

http://i.imgur.com/8s6zbgQ.png

http://i.imgur.com/XoGl8Fm.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 08, 2017, 10:00:28 PM



For some reason it keeps saying its profitability is higher than it really is. like a lot higher. I saw most the network hash on it and it was at most getting a bock every minute. I had 33% of the share and getting very very little.

http://i.imgur.com/NTwvN5s.png

http://i.imgur.com/8s6zbgQ.png

http://i.imgur.com/XoGl8Fm.png

it's just cause the diff is so low. not much hash gets put on it and it's mBTC remember.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 08, 2017, 10:07:10 PM

it's just cause the diff is so low. not much hash gets put on it and it's mBTC remember.

yes, but it thinsk the TTF is ~1 sec when really it is more like 1-2 minutes.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 08, 2017, 10:10:42 PM

it's just cause the diff is so low. not much hash gets put on it and it's mBTC remember.

yes,

.00057 mBTC = 0.00000057 BTC = $0.00085  / Minutes.....


like I said, something Is / Was wrong.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 08, 2017, 10:11:47 PM

it's just cause the diff is so low. not much hash gets put on it and it's mBTC remember.

yes, but it thinsk the TTF is ~1 sec when really it is more like 1-2 minutes.



TTF is if ALL the pool's hash was pointed at that coin, not what hash is currently on it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 08, 2017, 10:20:57 PM

it's just cause the diff is so low. not much hash gets put on it and it's mBTC remember.

yes, but it thinsk the TTF is ~1 sec when really it is more like 1-2 minutes.



TTF is if ALL the pool's hash was pointed at that coin, not what hash is currently on it.

Nyan doing the same thing.

Looks like TTF is ~10 seconds. and earns .0005 mBTC

6 * 60 * 24 * .0005 mBTC = 4.32 mBTC

http://i.imgur.com/VNBgKEv.png
http://i.imgur.com/UiRePP9.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 08, 2017, 10:35:09 PM
ok, you guys don't get it.  the pool TTF is a guess based on COMBINED POOL HASHRATE.  Not that one coin's hashrate the pool is diverting to it.


You don't calculate your hashrate based on TTF ever;  because it's a floating variable based on hashrate beyond your own.  This is not how you calculate things based on YOUR hashrate.


you calculate profitability based on your pool calculated hashrate, and the average of algo over the same period to time;  the longer the period of time, the more stable the calculation is.  Luck always will be there, so you can't exactly account for it, just figure plus or minus 15-20%.

not to be calculated by "how long it could theoretically take under a completely different set of circumstances/hashrate to find a block in just one coin of many that are mined on that algo".


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 08, 2017, 11:50:46 PM
ok, you guys don't get it.  the pool TTF is a guess based on COMBINED POOL HASHRATE.  Not that one coin's hashrate the pool is diverting to it.


You don't calculate your hashrate based on TTF ever;  because it's a floating variable based on hashrate beyond your own.  This is not how you calculate things based on YOUR hashrate.


you calculate profitability based on your pool calculated hashrate, and the average of algo over the same period to time;  the longer the period of time, the more stable the calculation is.  Luck always will be there, so you can't exactly account for it, just figure plus or minus 15-20%.

not to be calculated by "how long it could theoretically take under a completely different set of circumstances/hashrate to find a block in just one coin of many that are mined on that algo".

You're right, I don't understand exactly how it works.

I do understand when something isn't working correctly. I was just trying to point out and understand why the pool was mining a very non profitable coin.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 09, 2017, 12:10:43 AM
you might wanna consider why it was mining that coin at that instance... most likely exchange rate is high for some reason, or the diff dropped on that coin enough to make throwing some hash at it worth it.

It's not a problem with the pool;  it's the nature of the beast.  It is working correctly;  exactly as its programmed to do, not as you think it should be configured...  =/

Just like the profitability estimate;  it initially shows you what people are selling for as an earned value;  but when its sold;  the buys could be on the opposite side of the spectrum and are lower than the sell orders (typical market).  It would be less noticeable if it were configured as only counting the low (purchase orders), that way the highs are felt in a better light.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 09, 2017, 12:40:36 AM
you might wanna consider why it was mining that coin at that instance... most likely exchange rate is high for some reason, or the diff dropped on that coin enough to make throwing some hash at it worth it.

It's not a problem with the pool;  it's the nature of the beast.  It is working correctly;  exactly as its programmed to do, not as you think it should be configured...  =/

Just like the profitability estimate;  it initially shows you what people are selling for as an earned value;  but when its sold;  the buys could be on the opposite side of the spectrum and are lower than the sell orders (typical market).  It would be less noticeable if it were configured as only counting the low (purchase orders), that way the highs are felt in a better light.

How long does it take to adjust? I noticed we enabled the coin again and it is still no where near as profitable as it says it is.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 09, 2017, 01:16:34 AM
Just an observation, don't get too caught up in the individual workings of specific coins.  The whole point of multi-algo mining is so you can ignore the coins themselves and optimize based on your hardware and hashrate.  Let the pool do its job and decide what hashes to send your miner.  Sit back and watch your payouts for a week.  Take that average daily payout and compare it against WhatToMine estimate for the last seven days.  Doing this, I am always making more than what WhatToMine has calculated for my hardware (especially because it doesn't account for Skein and other good algos).  As long as you are at or above that, then whats there to worry about?  You are either hitting the average or besting it.  Work on your hardware and optimize your mining setup. 

zpool isn't cheating you on one coin out of hundreds.

Keep up the good work Crackfoo.  I appreciate how well the pool functions.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 09, 2017, 01:20:37 AM
Weird, mine are just temperamental I guess. ;D  No biggy though, it doesn't spend much time on it even when it is up.

Looks like the x14 algo (BERN) has disappeared again.  I've seen it do this before, it throws my Baikals offline when they can't find it.  I removed it from them for now, so just a heads up.

Hrmm, my baikals are still going ok.

It's offline cause BERN lost all it's peers again. It's been a PITA lately for this reason. I don't have the time to mess with it again to find peers but when I do, I'll put it back...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 09, 2017, 01:55:31 AM
Just an observation, don't get too caught up in the individual workings of specific coins.  The whole point of multi-algo mining is so you can ignore the coins themselves and optimize based on your hardware and hashrate.  Let the pool do its job and decide what hashes to send your miner.  Sit back and watch your payouts for a week.  Take that average daily payout and compare it against WhatToMine estimate for the last seven days.  Doing this, I am always making more than what WhatToMine has calculated for my hardware (especially because it doesn't account for Skein and other good algos).  As long as you are at or above that, then whats there to worry about?  You are either hitting the average or besting it.  Work on your hardware and optimize your mining setup. 

zpool isn't cheating you on one coin out of hundreds.

Keep up the good work Crackfoo.  I appreciate how well the pool functions.

I like zpool, and I don't think anyone is cheating. I actually really like it. I'd like to move all my rigs to zpool but they dont offer Ethereum.

But something is not working correctly. There is no way it should be mining this coin right now. And my 1GH is still mining it...

IS there a way using the password field to specify a coin to mine or exclude a coin?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 09, 2017, 02:36:29 AM
nope, only exclude an algo.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 09, 2017, 12:41:19 PM
Weird, mine are just temperamental I guess. ;D  No biggy though, it doesn't spend much time on it even when it is up.

Looks like the x14 algo (BERN) has disappeared again.  I've seen it do this before, it throws my Baikals offline when they can't find it.  I removed it from them for now, so just a heads up.

Hrmm, my baikals are still going ok.

It's offline cause BERN lost all it's peers again. It's been a PITA lately for this reason. I don't have the time to mess with it again to find peers but when I do, I'll put it back...

BERN is back on again but someone was still mining using a BERN address so we're behind on BERN payouts. Shouldn't take too long to catch up.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:36:54 PM
lol
u are scamer
the custumers sucks why u not pay


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:38:12 PM
Just a heads up, this is the type of support ticket that... well... gets you no support and your accounts locked/banned.

https://i.snag.gy/Hn4LKI.jpg

I do my best to resolve all issues, but if you respond with that. I don't have time for it.
that is real
your pool not pay...........
that is true for customers say fuck


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 09, 2017, 11:42:56 PM

that is real
your pool not pay...........
that is true for customers say fuck


so they aren't customers anymore lol
any payout other than btc can be delayed up to indefinitely, it's clear enough


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:43:10 PM
until now your pool not pay...need proof
 proof 1=http://prntscr.com/f60cxi     this was 4 days ago still not pay
proof 2 coin frn= your pool just pay 253 frn but there are i miner around 500 frn http://prntscr.com/f60dip

dont mining in zpool


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:44:41 PM

that is real
your pool not pay...........
that is true for customers say fuck


so they aren't customers anymore lol
any payout other than btc can be delayed up to indefinitely, it's clear enough

out others pool...thx i m donation u


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 09, 2017, 11:44:59 PM
until now your pool not pay...need proof
 proof 1=http://prntscr.com/f60cxi     this was 4 days ago still not pay
proof 2 coin frn= your pool just pay 253 frn but there are i miner around 500 frn http://prntscr.com/f60dip

dont mining in zpool

Try reading the home page. It clearly tells you that you might night get paid in any other coin except BTC if the coin has not been mined by the pool.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:45:37 PM
u can check pictures i m complain date 7
and until now not pay


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 09, 2017, 11:47:51 PM
u can check pictures i m complain date 7
and until now not pay

Again try reading the home page. You do not have enough FRN to receive a pay out and the pool is short WDC...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 09, 2017, 11:48:39 PM
u can check pictures i m complain date 7
and until now not pay

oh really lol ?
look how many DOTs the pool is in debt, 230000 !
some idiot ordered a lot obviously not understanding how this pool works,
i'm not sure he'll get them in a month or so


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:49:35 PM
u can check pictures i m complain date 7
and until now not pay

Again try reading the home page. You do not have enough FRN to receive a pay out and the pool is short WDC...
wtf for pool
i m out.....other pool any more good and fast pay out


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 09, 2017, 11:51:19 PM
u can check pictures i m complain date 7
and until now not pay

Again try reading the home page. You do not have enough FRN to receive a pay out and the pool is short WDC...
wtf for pool
i m out.....other pool any more good and fast pay out

because this pool is different, it doesn't buy coins for you, only mining.
if coin is not profitable at this time it won't mine it and you never get it.
any of it, except btc


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 09, 2017, 11:53:35 PM
u can check pictures i m complain date 7
and until now not pay

oh really lol ?
look how many DOTs the pool is in debt, 230000 !
some idiot ordered a lot obviously not understanding how this pool works,
i'm not sure he'll get them in a month or so
It does seem like plenty of people do not understand how this pool works. Kind of sad. Maybe Crackfoo should try to get the home page translated in other languages and have it posted here since it often seems like the people that have the hardest time understanding clearly are not English speakers (at least as a first language).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 09, 2017, 11:54:28 PM
u can check pictures i m complain date 7
and until now not pay

oh really lol ?
look how many DOTs the pool is in debt, 230000 !
some idiot ordered a lot obviously not understanding how this pool works,
i'm not sure he'll get them in a month or so
It does seem like plenty of people do not understand how this pool works. Kind of sad. Maybe Crackfoo should try to get the home page translated in other languages and have it posted here since it often seems like the people that have the hardest time understanding clearly are not English speakers (at least as a first language).

oh no, less idiots - more profits for others lol


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: wklalen on May 09, 2017, 11:55:50 PM
same acoount attack me
nice all


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 10, 2017, 10:34:53 AM
Anyone who doubts that the pool doesn't pay out regularly;  should check the BTC address in my batch files: 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP

Lots of history there.  They are consistent and reliable payments from zpool.

All complaints of payments (aside from the random issue that does pop up) are from people not understanding what they negate to understand or read on the homepage;  that if you wanna get paid in a certain coin OTHER THAN BITCOIN, you must wait for the pool to mine enough to pay people out from what has been mined.  If it's a coin that the pool hasn't mined much;  you have to wait for enough to satisfy all payout requirements:  in turn. 
Sorry, It's the nature of how it works. 

The reason for this is simple:  exchanges don't trade one altcoin for another;  only bitcoin for an altcoin.   Our pool doesn't trade backwards as we mine no bitcoin, we only exchange FOR it as that is the regular medium that exchanges work in.   I have yet to see one pool that exchanges everything only for something like Digibyte (DGB)...


So;  this is the inherent reason the pool will only pay out from what it mines.

Did you look on the pool's stats and see how often blocks were found for your selected coin in the past?  a huge list is available to see if it will meet your needs.  If its a low value block, and found not often... it doesn't sound like it's profitable to mine that often....

Mining from a pool is not meant for people who want to mine a specific coin because its price just shot up on the market.
The explanation to why your complaint is invalid is clearly printed on the homepage.  For exact heuristics;  see the pool code.  It is publically available.


I really wish I could delete your idiocracy.  You won't even listen to us.   I am trying to help.  I hope this gets through to you.
 


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 11, 2017, 02:48:29 PM
amber x13 is forked a while ago, see their topic.

took amber offline. peeked into their thread and I don't have time to figure out which is good/bad. Will leave it off and re-visit someday


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 11, 2017, 02:50:59 PM
amber x13 is forked a while ago, see their topic.

took amber offline. peeked into their thread and I don't have time to figure out which is good/bad. Will leave it off and re-visit someday

dk about the thread but topia and yobit locked, unless you'r collecting :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 11, 2017, 02:53:19 PM
amber x13 is forked a while ago, see their topic.

took amber offline. peeked into their thread and I don't have time to figure out which is good/bad. Will leave it off and re-visit someday

dk about the thread but topia and yobit locked, unless you'r collecting :)

not collecting, but perhaps sending them off into space.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 11, 2017, 03:01:54 PM
amber x13 is forked a while ago, see their topic.

took amber offline. peeked into their thread and I don't have time to figure out which is good/bad. Will leave it off and re-visit someday

dk about the thread but topia and yobit locked, unless you'r collecting :)

not collecting, but perhaps sending them off into space.

and fame ?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 11, 2017, 03:46:33 PM
amber x13 is forked a while ago, see their topic.

took amber offline. peeked into their thread and I don't have time to figure out which is good/bad. Will leave it off and re-visit someday

dk about the thread but topia and yobit locked, unless you'r collecting :)

not collecting, but perhaps sending them off into space.

and fame ?

crap, I saw that a while ago and forgot about it. yup, fame too, toast


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 12, 2017, 02:14:07 AM
What would it take to add some scrypt coins?

CNC
NLG
BTB
WBB


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 12, 2017, 12:23:55 PM
What would it take to add some scrypt coins?

CNC
NLG
BTB
WBB

CNC, I'll look into

NLG was on there but keeps crashing

BTB keep loosing peers and is a pain

WBB won't compile with the src I have and their repo was deleted. Devs says they'll put it back up when they upgrade... haven't checked in a while if they put it up


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 12, 2017, 12:44:41 PM
CNC

Did you mean CNNC?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: merlinsbeard on May 13, 2017, 09:46:13 PM
Hello, I am interested in switching to zpool from miningpoolhub because zpool supports more coins.

It says in setup to set profitability factors in .bat file. How do I figure out the profitability factor for the rig I am using? I will be using a 1070, 1080, and 2 rx 480s for now.

Or is it fine to not set any factors in -p and leave it default?

Thanks for the help!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 13, 2017, 10:14:14 PM
Hello, I am interested in switching to zpool from miningpoolhub because zpool supports more coins.

It says in setup to set profitability factors in .bat file. How do I figure out the profitability factor for the rig I am using? I will be using a 1070, 1080, and 2 rx 480s for now.

Or is it fine to not set any factors in -p and leave it default?

Thanks for the help!

This post:

https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405

and this thread should be able to get you going:

https://bitcointalk.org/index.php?topic=1777336.msg17729122



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: merlinsbeard on May 13, 2017, 10:56:32 PM
Hello, I am interested in switching to zpool from miningpoolhub because zpool supports more coins.

It says in setup to set profitability factors in .bat file. How do I figure out the profitability factor for the rig I am using? I will be using a 1070, 1080, and 2 rx 480s for now.

Or is it fine to not set any factors in -p and leave it default?

Thanks for the help!

This post:

https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405

and this thread should be able to get you going:

https://bitcointalk.org/index.php?topic=1777336.msg17729122



Awesome! Thank you kindly for the quick response. Got it up and running without any hassle. Really like the website so far.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 13, 2017, 11:37:15 PM
glad it got you sorted out.

If anything major happens, don't hesitate to ask here or send me a pm.. but most answers are in those links =)

For profitability calculating:
Since you are running a mixed density rig, you just gotta go for the overall rig hashrate and multiply it against the 24hr average for that algo... and you will get a rouch idea +-20% (as the profitability fluctuates and the accuracy decreases in turn)

For pool auto-switching profitability, we call it normalization and its in the links above.  Id suggest use normalization for the 1060/1070 with the values my batch has in the password field;  should be fine.

As for the RX480;  I have yet to buy ant ATI cards for mining, so I do not know what app/versions are best for each algo, so more searching or some other members here will help... but AFAIK, eth is still one of the most profitable for ATI, they are more suited to that type of task.  The nvidia cards really scream on the different algos once the miner app is optimized to the chip generations features.

FYI, I am unsure if its in my sig link (batch) post, but for the nvidia 10 series cards, I suggest trying ccmineralexis78 first.  Minerx117 compiled it, and you can download just that .exe from his mega link if you do not have the ability to compile the github source yourself: By clicking here (https://mega.nz/#F!42xgDIiZ!4RN20EILlvmWILgEWst_Qg).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 14, 2017, 05:16:29 AM


http://www.coinwarz.com/cryptocurrency/coins/chncoin


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 14, 2017, 06:16:52 PM
Looks like you're trying to get WBB and CNC. That would be great. Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 14, 2017, 08:07:01 PM
Looks like you're trying to get WBB and CNC. That would be great. Thanks

I did but CNC looks pretty poor for profitabilty...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 15, 2017, 02:50:27 PM
I've added a new algo and some new coins that go with it: Topaz and Doubloon

http://www.zpool.ca/site/gomining?algo=hmq1725

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 15, 2017, 10:07:43 PM
Feature Request:
It would be nice to see the payout list through the API for a wallet.  I'm working on enhancing my auto switching scripts and would love to be able to show actual payout averages over time for the last 7 and 30+ days.

It would also be nice to get a timestamp on those instead of the '8d ago' format.

Just an idea that would be helpful.  Thanks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 16, 2017, 02:38:10 AM
I've added a new algo and some new coins that go with it: Topaz and Doubloon

http://www.zpool.ca/site/gomining?algo=hmq1725

Cheers

FYI,

my 7x1080 does ~35MH/s for this algo.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 17, 2017, 09:30:12 PM
What happened?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 17, 2017, 09:38:05 PM
What happened?

??


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 17, 2017, 10:44:16 PM
http://i.imgur.com/af1Kfqt.png


My other rigs are perfect. Just the ones connected  to zpool


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 17, 2017, 11:02:50 PM
Last couple hours are showing no balance increase, but are showing hashrate and accepted shares and accepted blocks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on May 17, 2017, 11:12:19 PM
Exchanges have some issues since yesterday and can delay the yiimp cron tasks, as a side effect graphes can have some holes, don't panic


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 17, 2017, 11:24:23 PM
Exchanges have some issues since yesterday and can delay the yiimp cron tasks, as a side effect graphes can have some holes, don't panic

yeah looking into it now


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 17, 2017, 11:24:34 PM
Figured it was something like that.  Polo has been hammered since last night.  Still seeing blocks being found and hashrates are report with accepted shares, so no panic here.  ;D


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 17, 2017, 11:36:19 PM
Figured it was something like that.  Polo has been hammered since last night.  Still seeing blocks being found and hashrates are report with accepted shares, so no panic here.  ;D

yeah, they've been causing delays, but this issue now was not related I think. memcached seemed to take a vacation 5 hours ago. Restarted and looks like it's updating again.

lemme know if something else is out of wack.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 17, 2017, 11:44:40 PM
Cool, just waiting for the balance graph to bounce back.  The balance table is still incrementing so no issues there.  I see the skein graph is now climbing back up with the hashrate.  It will probably reset itself after the next payout.  Thanks!

EDIT: and it's bounced back; all is right in the crypto world!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 17, 2017, 11:46:49 PM
Cool, just waiting for the balance graph to bounce back.  The balance table is still incrementing so no issues there.  I see the skein graph is now climbing back up with the hashrate.  It will probably reset itself after the next payout.  Thanks!

yup, will take about 20-30 mins for graphs to level back out at the proper levels.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Megaquake on May 18, 2017, 03:00:55 AM
BitBar has a big percentage of orphaned, worth keeping?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 18, 2017, 12:23:00 PM
BitBar has a big percentage of orphaned, worth keeping?

that was from a few weeks ago. Seems ok now, that I have more peers.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 18, 2017, 04:11:41 PM
disabled ccex so coins with ccex as the only market will show as 0 value, but shouldn't be mined very much if at all.

Will re-enable when their site works again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 18, 2017, 05:03:39 PM
Looking to hear if there are many people that wouldn't be in favour of raising the minimum payments and/or the frequency. Given the state of the BTC network as of late, I'd rather not spend so much on fee's with all the tx. Granted I pay miners only 4 times a day, but I'm thinking of cutting that in 1/2, to only two payments a day.

Thoughts about this appreciated.

Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Mogsington on May 18, 2017, 05:25:16 PM
Looking to hear if there are many people that wouldn't be in favour of raising the minimum payments and/or the frequency.

I think your pool attracts a lot of smaller miners. Raising the minimum payment might drive them away. But a payout once a day would be fine .. but also I've noticed sometimes the site / pool seems to black out for a few seconds when the payments get processed. Is that going to get worse if you change it to once or twice a day?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 18, 2017, 05:34:05 PM
Looking to hear if there are many people that wouldn't be in favour of raising the minimum payments and/or the frequency.

I think your pool attracts a lot of smaller miners. Raising the minimum payment might drive them away. But a payout once a day would be fine .. but also I've noticed sometimes the site / pool seems to black out for a few seconds when the payments get processed. Is that going to get worse if you change it to once or twice a day?

Right, there are a lot of smaller miners. It is expensive to send those smaller tx's so it's a bit of a double edged sword. The pool shuts down the frontend on purpose during payout to allocate it's resources to payment calculations and minimize disruptions. It wouldn't change much with less payouts per day.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 18, 2017, 07:09:34 PM
Once a day wouldn't bother me at all.  I'm used to Nicehash which does the same if you are over a certain amount (.05 i think), otherwise you are paid once a week.  If it was once a day for anything over .005, I think it would be a good balance with the tx fees.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on May 18, 2017, 08:57:13 PM
Once a day would actually be awesome, as it will be really easy to see the profits/day for smaller test runs :D

When I'm testing just one or two card setups, I find with the 4 payments day I'm sometimes under 0.005 and miss a payment until the next time.
Makes it a bit harder to track as there are high and low days.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Lercker on May 18, 2017, 09:01:19 PM
Looking to hear if there are many people that wouldn't be in favour of raising the minimum payments and/or the frequency. Given the state of the BTC network as of late, I'd rather not spend so much on fee's with all the tx. Granted I pay miners only 4 times a day, but I'm thinking of cutting that in 1/2, to only two payments a day.
Two a day is fine by me. As some have said one is not bad either, though I think you might need to enable half pay for other cryptos if you went to once a day.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 19, 2017, 01:54:55 AM
im on board with twice a day;  seems like it should be fine for the smaller guys, and still save you in the large tx size fees.

Maybe make sunday the exception, and make it one payment.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on May 19, 2017, 06:30:47 AM
hi could you look into adding Sweepstake (jha) its currently on https://coinsmarkets.com/trade-BTC-SWEEP.htm (https://coinsmarkets.com/trade-BTC-SWEEP.htm)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 19, 2017, 08:24:48 AM
Once a day is good with me.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 19, 2017, 04:02:59 PM
Ok well I've made the changes:

Payouts are made automatically every 12 hours for all balances above 0.01 and balances more than 0.001 are paid on Sunday.

I'll run with this for a while and see how it goes and how BTC can recover over the next few weeks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 19, 2017, 04:06:56 PM
hi could you look into adding Sweepstake (jha) its currently on https://coinsmarkets.com/trade-BTC-SWEEP.htm (https://coinsmarkets.com/trade-BTC-SWEEP.htm)
I don't use that exchange.

Currently it's bittrex, bleutrade, c-cex, cryptopia, livecoin, nova, poloniex & yobit   


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 19, 2017, 09:25:34 PM
Have we stopped exchanging in the past 5 hours?  My actual balance has remained the same for that long now, even though I am still mining and earning at the same consistent rate.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 19, 2017, 11:16:15 PM
Have we stopped exchanging in the past 5 hours?  My actual balance has remained the same for that long now, even though I am still mining and earning at the same consistent rate.

Seem like exchanging is still occurring. Ccex was having problem earlier again today but I don't see any long lived processes on my dashboard. I'm AFK but will check into it shortly.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 19, 2017, 11:45:36 PM
Have we stopped exchanging in the past 5 hours?  My actual balance has remained the same for that long now, even though I am still mining and earning at the same consistent rate.

Seem like exchanging is still occurring. Ccex was having problem earlier again today but I don't see any long lived processes on my dashboard. I'm AFK but will check into it shortly.

yeah I see it going now but yeah I do see there was a lull, but maybe that's cause I changed the payment schedule. Will keep an eye on it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 20, 2017, 10:59:31 AM
Have we stopped exchanging in the past 5 hours?  My actual balance has remained the same for that long now, even though I am still mining and earning at the same consistent rate.

Seem like exchanging is still occurring. Ccex was having problem earlier again today but I don't see any long lived processes on my dashboard. I'm AFK but will check into it shortly.

yeah I see it going now but yeah I do see there was a lull, but maybe that's cause I changed the payment schedule. Will keep an eye on it.

So i just noticed the results from it figuring itself out.

Seems to have slowed down on those quick market order sells since its not trying to beat a huge deadline on selling the mined coins.

MY delta pending, vs. balance has greatly increased;  pretty much tripled...  I see .007 owed, but only .003 confirmed.  historically it was a max of .005 owed with .003 confirmed, or thereabouts.

I myself am curious is this will change the chance of catching a profitability spike on the exchanges.   I see it as it being more able in a sense act like its going to hold out for a high asking price, rather than putting a market sell order because it has to to pay the miners.

Is there a pool setting for time to sit on coins up for sale and update the market sell price as the market fluxes down, or does it even work that way?

Ive been curious abotu the backend, but don't want to try and navigate and understand someone else's functions and classes =D


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on May 21, 2017, 12:42:08 AM
came back to mine skein.

http://zpool.ca/?address=16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

I got 1.7.3 working to mine skein only.

getting 950 hash  per 1080 ti  others mention higher 

so what are people setting their 1080 ti's at.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 21, 2017, 12:50:25 AM
Are you using the Alexis fork or the spmod fork?  Alexis has a bit higher hash rate than spmod.  Otherwise, I don't bother changing clocks, but zer0k uses those 1080's so maybe he has some insight.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on May 21, 2017, 12:58:11 AM
Are you using the Alexis fork or the spmod fork?  Alexis has a bit higher hash rate than spmod.  Otherwise, I don't bother changing clocks, but zer0k uses those 1080's so maybe he has some insight.

i read alexis - 1.0 on the pool

http://zpool.ca/?address=16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr


Summary--------Miners------Shares.......Hashrate*------Reject*
skein.................4-----------8.2346%----9.4 GH/s-------0.2%

Details   Extra   Algo   Diff   ES**   Hashrate*   Reject*
ccminer/alexis-1.0   four1080TI,c=BTC,skein,stats   skein   0.8      2.4 GH/s
ccminer/alexis-1.0   one1080TI,c=BTC,skein,stats   skein   0.8      1.2 GH/s
ccminer/alexis-1.0   three1080TI,c=BTC,skein,stats   skein   0.8      3.2 GH/s
ccminer/alexis-1.0   two1080TI,c=BTC,skein,stats   skein   0.8      2.6 GH/s



I have:

 9x 1080 ti
 1x 1080
 3x 1070

I feel I should be about 10.5gh  and I am 9.4-9.7gh

I am going to boost  power to 75% on all the 1080 ti's


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 21, 2017, 02:55:23 AM
What about Sia?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 21, 2017, 03:52:55 AM
Phillip, underclocking/undervolting will reduce the hashrate is my guess.

Check the zpool benchmarks for the hashrate and intensity settings people have been using.

The pool side share to hashrate conversion isn't exactly linear...  I see my 500mh devices go as low as 300mh, and as high as 750 sometimes.  Usually a larger share found will see a very similar one right after...  kinda like the asicboost concept.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 21, 2017, 04:24:50 AM
Any chance of getting a Blake2b pool up for Sia while its riding high?  Would love to point my NVIDIA rigs at it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 21, 2017, 06:08:13 AM
FYI the new payout schedule of 2x for .01, and sundays for .005 is superb.

Makes payout graph much more consistent to compare.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: pikachuy on May 21, 2017, 11:44:43 AM
Anyway to improve the site to include like a estimated daily, weekly, and monthly profits? Not just the last 24 hours payment/balance? Something similar to nicehash (love looking at simple stats).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 21, 2017, 04:37:30 PM
Any chance of getting a Blake2b pool up for Sia while its riding high?  Would love to point my NVIDIA rigs at it.

I would be adding 35GH if you add it.....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 22, 2017, 08:01:48 AM
Was a payment missed?  Sunday 23:10 EDT....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 22, 2017, 10:51:30 AM
there was one this past afternoon;  ~18Hrs ago.

Was your bal less than .0001 at that moment in time?  I got mine....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 22, 2017, 12:50:19 PM
Was a payment missed?  Sunday 23:10 EDT....

unfortunately something got hungup shortly after I went to bed and missed the Sunday low payout window because of it, but all other payments were sent > 0.01

One of the drawbacks of less payments per day, especially Sundays, since there is only one chance.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 22, 2017, 02:31:20 PM
All the neoscrypt coins says they are worh 0 BTC.  Also the same happened to HUSH.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 22, 2017, 02:32:08 PM
Was a payment missed?  Sunday 23:10 EDT....

unfortunately something got hungup shortly after I went to bed and missed the Sunday low payout window because of it, but all other payments were sent > 0.01

One of the drawbacks of less payments per day, especially Sundays, since there is only one chance.

Thanks.  I thought I was misunderstanding the way things are working.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 22, 2017, 02:34:49 PM
One of the drawbacks of less payments per day, especially Sundays, since there is only one chance.

what about changing sunday time to end of day? might help the smaller guys.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 22, 2017, 03:25:37 PM
One of the drawbacks of less payments per day, especially Sundays, since there is only one chance.

what about changing sunday time to end of day? might help the smaller guys.

It was already set for anytime after 12 EDT, and with payouts every 12, only one payout falls in that time, and well... cryptopia hung it up and it missed its window.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 22, 2017, 08:05:32 PM
Why do the majority of the Neoscrypt coins and HASH coins that says they are worth 0 BTC?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 22, 2017, 08:37:10 PM
Any chance zcash can get enabled in the equihash pool?  Its in a huge pump right now and profitability is high.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 22, 2017, 11:38:01 PM
Any chance zcash can get enabled in the equihash pool?  Its in a huge pump right now and profitability is high.

Will enough hash come by and pop some blocks? I'd love to be able to leave it on.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 22, 2017, 11:39:39 PM
Why do the majority of the Neoscrypt coins and HASH coins that says they are worth 0 BTC?

Cryptopia API is still causing grief and that's where most of those coins live. Same with Blakecoin ones :/


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 22, 2017, 11:45:21 PM
Hmmm, depends on it being more profitable than skein for my scripts to switch over.  Is the block time its showing include the current hashrate on the pool?

I've got 12x 1070's (soon to be more) that will switch to it when the profitability is there if that helps . . .

Any chance zcash can get enabled in the equihash pool?  Its in a huge pump right now and profitability is high.

Will enough hash come by and pop some blocks? I'd love to be able to leave it on.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 23, 2017, 12:07:48 AM
Hmmm, depends on it being more profitable than skein for my scripts to switch over.  Is the block time its showing include the current hashrate on the pool?

I've got 12x 1070's (soon to be more) that will switch to it when the profitability is there if that helps . . .

Any chance zcash can get enabled in the equihash pool?  Its in a huge pump right now and profitability is high.

Will enough hash come by and pop some blocks? I'd love to be able to leave it on.

The blocktime that shows on the pool, is if all the hashrate was pointed at that coin. so yeah... right now... @10k/Sol... a week to maybe find a block ;)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 23, 2017, 01:24:54 AM
Whoa!  I hope this isn't a mistake.  We just got a block worth 8,656.87134897 KMD!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 23, 2017, 02:27:24 AM
Whoa!  I hope this isn't a mistake.  We just got a block worth 8,656.87134897 KMD!

Looks like. It happens now and then.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: merlinsbeard on May 23, 2017, 04:49:49 AM
So do you guys recommend mining just one algorithm at a time or using the multi-algo switching system?

I am not sure what the algorithm switching is calculated from and it seems to differ quite a bit from whattomine.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 23, 2017, 04:56:44 AM
It can vary wildly based on market swings for profit switching; but it does it based on what it can actually get or what the market sees....  which is much different than a site that bases its data on exchanges that the pool doesn't use, and more importantly the analytical speculations... which adds a lot more error.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 23, 2017, 09:35:31 PM
Zcash, here we come!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: kopija on May 24, 2017, 03:20:03 AM
Greetings,
my balance has been above .01 for two days now, still no transfer, how come?
http://zpool.ca/?address=1ki2MRXwDj19ZCgx9Latajc8LVJ8PR78a
Thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 24, 2017, 03:30:33 AM
Greetings,
my balance has been above .01 for two days now, still no transfer, how come?
http://zpool.ca/?address=1ki2MRXwDj19ZCgx9Latajc8LVJ8PR78a
Thanks.

Total unpaid is un-confirmed.

"Balance" is all funds that have sold and cleared on the exchange and ready to payout.

Looks like you'll get one on the next payout or the one after.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on May 24, 2017, 03:52:39 AM
Your total unpaid (.01623) is above, but your balance (.00927554) is not.  Based on current earnings you will probably get paid out tomorrow.

Total Pending + Balance = Total Unpaid

Your balance is what matters with payouts as that is actually settled BTC.

Greetings,
my balance has been above .01 for two days now, still no transfer, how come?
http://zpool.ca/?address=1ki2MRXwDj19ZCgx9Latajc8LVJ8PR78a
Thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: kopija on May 24, 2017, 04:34:56 AM
Greetings,
my balance has been above .01 for two days now, still no transfer, how come?
http://zpool.ca/?address=1ki2MRXwDj19ZCgx9Latajc8LVJ8PR78a
Thanks.

Total unpaid is un-confirmed.

"Balance" is all funds that have sold and cleared on the exchange and ready to payout.

Looks like you'll get one on the next payout or the one after.



Thanks jwarren81 and Jared for answering (this and  that other question) :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 26, 2017, 10:43:02 PM
Did you get rid of the check box that expanded details on total coins earned?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 26, 2017, 10:59:00 PM
Did you get rid of the check box that expanded details on total coins earned?
^^^^   Check box does appear to be missing.....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 27, 2017, 08:58:04 PM
Did you get rid of the check box that expanded details on total coins earned?
^^^^   Check box does appear to be missing.....

yeah for now until I figure out why they're a lot higher than the (total pending) row. They're adding up from the same data so not sure why they're not the same.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 28, 2017, 07:05:49 AM
Did you get rid of the check box that expanded details on total coins earned?
^^^^   Check box does appear to be missing.....

yeah for now until I figure out why they're a lot higher than the (total pending) row. They're adding up from the same data so not sure why they're not the same.

I noticed this a long time ago and posted about it, and someone dismissed the question saying it was due to estimation.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 28, 2017, 03:04:34 PM
Did you get rid of the check box that expanded details on total coins earned?
^^^^   Check box does appear to be missing.....

yeah for now until I figure out why they're a lot higher than the (total pending) row. They're adding up from the same data so not sure why they're not the same.

I noticed this a long time ago and posted about it, and someone dismissed the question saying it was due to estimation.

long time ago it was quite different, and changed several times since then


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 29, 2017, 05:33:36 AM
Did you get rid of the check box that expanded details on total coins earned?
^^^^   Check box does appear to be missing.....

yeah for now until I figure out why they're a lot higher than the (total pending) row. They're adding up from the same data so not sure why they're not the same.

I noticed this a long time ago and posted about it, and someone dismissed the question saying it was due to estimation.

long time ago it was quite different, and changed several times since then

Nope, same issue.  They didn't add up.  Understood it was estimated, but the total was just a total of the estimation, and it did not add up.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: kopija on May 29, 2017, 06:18:42 AM
Greetings,
one of my miners mining skein keeps disappearing from the dashboard although it keeps happily mining without errors. Its also showing in #earnings dashboard, however.
I like to keep an eye on them, so is there a way to fix this disappearance problem?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 29, 2017, 07:05:34 AM
Greetings,
one of my miners mining skein keeps disappearing from the dashboard although it keeps happily mining without errors. Its also showing in #earnings dashboard, however.
I like to keep an eye on them, so is there a way to fix this disappearance problem?

Ive narrowed it down to (i think) when the pool shuts off services to issue payments....

crackfoo, maybe this will help narrow it down.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on May 29, 2017, 12:13:49 PM
Greetings,
one of my miners mining skein keeps disappearing from the dashboard although it keeps happily mining without errors. Its also showing in #earnings dashboard, however.
I like to keep an eye on them, so is there a way to fix this disappearance problem?

Ive narrowed it down to (i think) when the pool shuts off services to issue payments....

crackfoo, maybe this will help narrow it down.

It just shuts off nginx. Not sure why the miners disappear sometimes, it requires me to restart the stratum server, which I just did now. Lemme know if they came back.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 30, 2017, 04:15:05 AM
it looks like they came back for me;  but then again, I just got back from SF and un-#@$!%$#'ed my internet from the settings I apply when I will be away for several days to negate any downtimes.... so it could have been me rebooting everything.

I have been thinking of adding an auto-reboot script to all my miners to happen every X hours.... not sure if it will help anything in the long run, but I do have one machine that likes to randomly freeze every once in awhile.... so I still might continue this idea.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on May 30, 2017, 02:28:30 PM
my issues as follows:

all five miners vanish  but the 10gh  still credits  so I do not mind this.


the next issue is madding.


this address works fine:

16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr  is has earned over .4 btc


this address worked 1 time

1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

it earned around 0.00000134 btc

it won't work.

and so far this address won't work

1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i

at the moment I have 1 1080 ti pointed here  using this address:

1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i


earning nothing altough on my side it shows 895-905 hash

if I switch it to 16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr  it works fine.


so why can't I get  these 2  addresses to work


1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje   it worked for a tiny little bit earned 0.00000134

and the new one 1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i


The only one that works is the address I use for my partnership  with buysolar and the solar array coins.

So it makes for difficult accounting.

could you please check


http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

 http://zpool.ca/?address=1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i



and I finally got this one to work!



http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


so I am all good!!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on May 30, 2017, 02:35:52 PM

it won't work.

and so far this address won't work

1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i

at the moment I have 1 1080 ti pointed here  using this address:

1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i


earning nothing altough on my side it shows 895-905 hash

if I switch it to 16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr  it works fine.

seems to me smth miner-related, i tried one of such addys with sgminer and cgminer on amd gpu - no prob

right now i'm doin' the same to 1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i, shortly you'll see the result


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on May 30, 2017, 11:03:53 PM
Phil, it must be the miner app your using.

http://zpool.ca/?address=1PQcjXGVQ8ytrt1hBdWZ8yfzk9Cfobwj3i

started mining just fine.   Ill leave it there for a little while.  If I fall asleep, bigger bonus for you I guess.... lol

*edit*

REM out the neoscrypt line, and remove it from the password string... may be your issue.

Ive had issues running neoscrypt with profit switching.  at one point it just either crashes the video driver, or reduces P-state to 5 or 8.. (real bad)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on May 31, 2017, 05:07:24 PM
Everything ok with Blake2s? I'm getting some funny stuff going on.

Stratum Connection Interrupted


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on May 31, 2017, 08:32:03 PM
Everything ok with Blake2s? I'm getting some funny stuff going on.

Stratum Connection Interrupted

seems to be sorted now.. or not still having problems hashrate reporting very low on the pool..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on May 31, 2017, 10:12:47 PM
I've been mining a single algo for GPU a while now, and looking into the auto-switching.

What is a good miner, algo, and factor for:

Intel Core i7 4770K
Ryzen 1700
nVidia 1080 Ti
AMD 280x


For CPU, I've been using cpuminer-opt, and it responds well to the stratum connection closing when the algo changes.  Right now the only CPU algos I mine on are m7m, xevan, and yescrypt using the default factor.

For 1080 Ti, I'm on equihash with EWBF Cuda miner.

For AMD 280x, I'm on neoscrypt (forgot the miner - will have to check when I get back home).


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 01, 2017, 04:49:02 AM
FYI, been having stratum connection interruptions for the last 30-45 minutes.  Doesn't seem to be a particular algo, had some with Blake2s and currently on bitcore.

EDIT:  Looks like its cleared up.  Mining again full speed.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 01, 2017, 11:44:38 AM
280x should be on etherium and/or expanse or probably most of the time on equihash, i7 should be on monero with claymore cpu miner but getting fast speed could be tricky, for nvidia and ryzen check zpool bench(mark) pages for miner versions and hashrate.

Hmm... Zpool doesn't support etherium, expanse, or monero unless I'm missing something...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 02, 2017, 04:32:45 AM
Looks like equihash pool is having issues.  Can't connect to it.  Others are working though.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 02, 2017, 06:41:56 AM
Looks like equihash pool is having issues.  Can't connect to it.  Others are working though.

Mine is still mining and submitting shares, but haven't found a block for 3 hours.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 02, 2017, 09:30:11 AM
Question:

I am getting ready to revisit my batch and add the new algos and whatnot.

Since there's the issue with connected miner info ghosting but hashrate still shows;  I am thinking of adding a timer and app kill/restart after so much time has passed.

Probably gonna reset itself every algo switch for auto-switching setups (or maybe it's entirely unnecessary to enable on this mode).... but, I think it's a nice mid-term solution to a very strange bug to track down.

Thoughts?

Any features requested at this time?  (I plan to devote some hours if I get a fancy idea, or you get one)

I am also going to be combining all of my batch files into one....

I.E.
C:/zpool.ca/startminer.bat -ProfitSwitch
or
C:/zpool.ca/startminer.bat -ManualMode -AutoRestart 30
or
C:/zpool.ca/startminer.bat -BasicMode

I will also be making it much easier to input manual intensity settings on each algo (configurable up top with the rest of the user configurable options).

So any input will input further in making it better for everyone.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: dragonmike on June 02, 2017, 11:01:42 AM
Sorry if it's been asked already... but haven't found any post about it in the last 10 pages :P so...

Why no Ethash switching? With so many different coins now (ETH, ETC, UBQ, MUSIC, EXP...) it would definitely make sense? Nicehash got one but profitability is lower than all of the above so doesn't make much sense...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 02, 2017, 12:19:32 PM
Sorry if it's been asked already... but haven't found any post about it in the last 10 pages :P so...

Why no Ethash switching? With so many different coins now (ETH, ETC, UBQ, MUSIC, EXP...) it would definitely make sense? Nicehash got one but profitability is lower than all of the above so doesn't make much sense...

Unfortunately the stratum code used doesn't support these algos :\


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: VyprBTC on June 02, 2017, 03:59:36 PM
All my miners were not earning for about 4 hours - there's no way all my miners at 3 different locations go down at the same exact time for the same amount of time - is there any explanation for this?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 02, 2017, 04:55:06 PM
I think the graph is not working again. Earnings are still showing up for me. This happened a couple weeks ago too.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 02, 2017, 05:28:34 PM
Question:

I am getting ready to revisit my batch and add the new algos and whatnot.

Since there's the issue with connected miner info ghosting but hashrate still shows;  I am thinking of adding a timer and app kill/restart after so much time has passed.

Probably gonna reset itself every algo switch for auto-switching setups (or maybe it's entirely unnecessary to enable on this mode).... but, I think it's a nice mid-term solution to a very strange bug to track down.

Thoughts?

Any features requested at this time?  (I plan to devote some hours if I get a fancy idea, or you get one)

I am also going to be combining all of my batch files into one....

I.E.
C:/zpool.ca/startminer.bat -ProfitSwitch
or
C:/zpool.ca/startminer.bat -ManualMode -AutoRestart 30
or
C:/zpool.ca/startminer.bat -BasicMode

I will also be making it much easier to input manual intensity settings on each algo (configurable up top with the rest of the user configurable options).

So any input will input further in making it better for everyone.

I think a feature that would be really cool is notification if your miner stops working.
You can pull some data from the API and check that your accepted shares are still rising.

Downtime really hurts if you don't catch it quickly


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 02, 2017, 07:42:16 PM
Settle down, the pool is working fine.  Its just the graph reporting thats having issues.  Its happened before and will get corrected.  Just wait for Crackfoo to get to it.

Making idle threats is pointless, especially if you don't have more than a handful of GPUs.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: pindis on June 02, 2017, 09:31:41 PM
are we sure everything works? I've been mining the same coin for 4 hours now on the multipool?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 02, 2017, 09:50:55 PM
Which algo?  Equihash may still have issues as it hasn't shown an updated block in 3 hours, but has been accepting shares.  So it may simply be the Web GUI not updating.  Other algos are reporting fine though, running hmq1725 now with multiple coins finding blocks. 

Balance and Total unpaid continue to increase as well.

are we sure everything works? I've been mining the same coin for 4 hours now on the multipool?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 02, 2017, 10:07:44 PM
Settle down, the pool is working fine.  Its just the graph reporting thats having issues.  Its happened before and will get corrected.  Just wait for Crackfoo to get to it.

Making idle threats is pointless, especially if you don't have more than a handful of GPUs.

Should be ok now, it was just the graphing scripts hung for a while. We did some ZEN changes but should have been unrelated to graphing but, I backed out all changes today and seems graphing is returned.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: pindis on June 02, 2017, 10:26:18 PM
Which algo?  Equihash may still have issues as it hasn't shown an updated block in 3 hours, but has been accepting shares.  So it may simply be the Web GUI not updating.  Other algos are reporting fine though, running hmq1725 now with multiple coins finding blocks.  

Balance and Total unpaid continue to increase as well.

are we sure everything works? I've been mining the same coin for 4 hours now on the multipool?
It was the autoswitchminer :) the coin it was mining was Verge aka x17 :)

EDIT: We're indeed back switching coins/algos again!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 02, 2017, 11:16:55 PM
I'm still not sure things are working perfectly.

Right now I have 1.92 GH/s on zpool for skein and it only appears to be worth 0.00624 BTC or $15.69 a day.

But if I go and check whattomine it is showing profitability to be more than double at 0.013618 BTC or $32.60 a day.

My profit switching seems to think hmq1725, blake2s, nist5, equihash, sib and bitcore are all better to mine.
Skein very rarely drops that low in the rankings and I'm curious why.

It could totally be an issue on my end, but I there any chance you could double check why skein is so low?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 03, 2017, 02:20:34 AM
I'm still not sure things are working perfectly.

Right now I have 1.92 GH/s on zpool for skein and it only appears to be worth 0.00624 BTC or $15.69 a day.

But if I go and check whattomine it is showing profitability to be more than double at 0.013618 BTC or $32.60 a day.

My profit switching seems to think hmq1725, blake2s, nist5, equihash, sib and bitcore are all better to mine.
Skein very rarely drops that low in the rankings and I'm curious why.

It could totally be an issue on my end, but I there any chance you could double check why skein is so low?

if you ask me;  whatttomine is for the sheep.   It bases its information on multiple sources/exchanges (mixing them for results on a per-site basis) and also includes a human factor which adds even more error.   What exchange is whattomine basing this price info off of, at what time? (see what I mean?)

Keep this in mind.  you are taking advice from a 3rd party that;  frankly, has been historically inaccurate in many ways in my eyes.

24 hour profitability has been hovering around 0.004mBTC/day recently......  which is easy to do spot math on yourself.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: scryed on June 03, 2017, 03:19:02 AM
I'm still not sure things are working perfectly.

Right now I have 1.92 GH/s on zpool for skein and it only appears to be worth 0.00624 BTC or $15.69 a day.

But if I go and check whattomine it is showing profitability to be more than double at 0.013618 BTC or $32.60 a day.

My profit switching seems to think hmq1725, blake2s, nist5, equihash, sib and bitcore are all better to mine.
Skein very rarely drops that low in the rankings and I'm curious why.

It could totally be an issue on my end, but I there any chance you could double check why skein is so low?

if you ask me;  whatttomine is for the sheep.   It bases its information on multiple sources/exchanges (mixing them for results on a per-site basis) and also includes a human factor which adds even more error.   What exchange is whattomine basing this price info off of, at what time? (see what I mean?)

Keep this in mind.  you are taking advice from a 3rd party that;  frankly, has been historically inaccurate in many ways in my eyes.

24 hour profitability has been hovering around 0.004mBTC/day recently......  which is easy to do spot math on yourself.

Jared,

Can you let me know if I'm doing this math correctly from zpool? If the 24 hour profitbility is .004mBTC/day and I have 1,000MH/s, I should be making 4mBTC per day (.004mBTC x 1,000MH/s = 4mBTC)?

Which is about $9.6 every 24 hours.

Thanks,


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 03, 2017, 03:41:09 AM
I'm still not sure things are working perfectly.

Right now I have 1.92 GH/s on zpool for skein and it only appears to be worth 0.00624 BTC or $15.69 a day.

But if I go and check whattomine it is showing profitability to be more than double at 0.013618 BTC or $32.60 a day.

My profit switching seems to think hmq1725, blake2s, nist5, equihash, sib and bitcore are all better to mine.
Skein very rarely drops that low in the rankings and I'm curious why.

It could totally be an issue on my end, but I there any chance you could double check why skein is so low?

if you ask me;  whatttomine is for the sheep.   It bases its information on multiple sources/exchanges (mixing them for results on a per-site basis) and also includes a human factor which adds even more error.   What exchange is whattomine basing this price info off of, at what time? (see what I mean?)

Keep this in mind.  you are taking advice from a 3rd party that;  frankly, has been historically inaccurate in many ways in my eyes.

24 hour profitability has been hovering around 0.004mBTC/day recently......  which is easy to do spot math on yourself.

Jared,

Can you let me know if I'm doing this math correctly from zpool? If the 24 hour profitbility is .004mBTC/day and I have 1,000MH/s, I should be making 4mBTC per day (.004mBTC x 1,000MH/s = 4mBTC)?

Which is about $9.6 every 24 hours.

Thanks,

(0.004*1000)-2%0.08=3.92mBTC

yup, pretty close.  but that was 3.92 in the previous 24 hrs from that point in time.   notice it fluxes.... up and down.

It's like the newspaper.  Yesterdays news.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 03, 2017, 12:35:03 PM
Think there is something wrong with your skein autoswitching. DGB is the most profitable by far! So why is your pool still switching to other much lower profitable coins? Seems it should stay on the most profitable..... Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 03, 2017, 01:03:58 PM
Think there is something wrong with your skein autoswitching. DGB is the most profitable by far! So why is your pool still switching to other much lower profitable coins? Seems it should stay on the most profitable..... Thanks

what?  What was the "diff vs pool hashrate" at that moment vs other coins in that algo?  was it economical to send the hash to DGB at that moment?

I will admit;  DGB has nearly doubled.... but look at the network difficulty..... see any correlations there?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: kopija on June 03, 2017, 03:22:55 PM
So in algo-switching scenario, pool decides what user will mine not based on currently highest priced coin only, but on price AND difficulty parameters?
So ATM: DGB: high price, high difficulty; Topaz: price not so high as DGB but diff lower than DGB, so pool chooses Topaz.
Correct?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 03, 2017, 03:50:36 PM
What I pay attention to is the amount per I am getting paid for each algo. For me the end result ($$$) is what matters. DGB is WAY above the other algos looking from this perspective which to me is what matters most to get bang for buck. So naturally when I see payout for Digibyte at .21547 and payout for HashTap at .00205 it gets my attention that something doesn't add up. Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 03, 2017, 04:43:36 PM
Honestly, people try to get too far into the weeds on this stuff, its really not complicated.  If you want to mine the skein algo, just download the latest ccminer from spmod, reset all your clock settings to default, give it a -25% tdp, then run the miner against the pool with default settings.

This is if you are not multi-algo mining, which is slightly more complicated in that you need to run scripts to switch algos.  But again, set it to default, lower the tdp, then leave it alone.

Let it run for a week and see what your profits are.  Hell, just ignore it for that week so you aren't tempted to screw with it.  The only adjustment I made to my miners for the last couple weeks, was shutting off equihash for a few hours because of some goofyness with the stratum.  Turned it back on once I saw the pool resume finding blocks.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: lexele on June 03, 2017, 05:25:40 PM
About why the miner does'nt stay on skein when it's much profitable: If all the hashrate is switched on skein, there's a good chance the rewards drop steep (same amount shared with more miners), therefore it's no longuer profitable and the algo switches back to something else.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 03, 2017, 05:43:42 PM
Right at this moment, my hardware is running Blake2s as the highest profit; 2nd is Equihash, 3rd is hmq1725, 4th is Skein.  This is based directly from the current estimated earnings through zpool's API.  This fluctuates quite a bit throughout the day.  This totally differs from what whattomine tells you as well.  But I get very consistent payouts following zpool's profit stats when multi-algo mining.

Edit:  Whattomine doesn't even have blake2s algo's and coins on their main page.  Nor does it have skein on the main page.  Missing a lot of the market by relying on them like many people do.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 03, 2017, 06:10:36 PM
Right at this moment, my hardware is running Blake2s as the highest profit; 2nd is Equihash, 3rd is hmq1725, 4th is Skein.  This is based directly from the current estimated earnings through zpool's API.  This fluctuates quite a bit throughout the day.  This totally differs from what whattomine tells you as well.  But I get very consistent payouts following zpool's profit stats when multi-algo mining.

Edit:  Whattomine doesn't even have blake2s algo's and coins on their main page.  Nor does it have skein on the main page.  Missing a lot of the market by relying on them like many people do.

What cards/miner are you running? Am running ccminer Alexis on 1080 ti's and only running skein.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 03, 2017, 06:23:45 PM
I am running two rigs, each with six Asus STRIX GTX 1070 OC.

Miner depends on the algo.  Ccminer SP for skein, EWBF for equihash and Ccminer 2.0 for all other algo's.

My rigs auto switch algo's frequently  and after testing Alexis it didn't address all GPUs consistently.  Spmod was much more stable and had very little difference in hashrate on my hardware.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: kopija on June 03, 2017, 06:51:36 PM
I am running two rigs, each with six Asus STRIX GTX 1070 OC.

Miner depends on the algo.  Ccminer SP for skein, EWBF for equihash and Ccminer 2.0 for all other algo's.

My rigs auto switch algo's frequently  and after testing Alexis it didn't address all GPUs consistently.  Spmod was much more stable and had very little difference in hashrate on my hardware.

I would not comment on stability/consistency of SP ccminer, but here are the Skein benchmarks that confirm your claim re: SP being the Skein Hero.
https://cloud.githubusercontent.com/assets/29152869/26749899/9d191c28-47e3-11e7-8076-ddd8c697f9f2.png
Source:
https://github.com/aaronsace/MultiPoolMiner/issues/131


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SharkOne on June 04, 2017, 02:56:30 AM
The pool page currently says that the pool is short about 3 Dash (shown in red). The last block was found 9 days ago. And we currently have 0 hashpower assigned to Dash.

I'm starting to think that we might never be able to mine another Dash block again :(
Unfortunately, I'm waiting on those blocks to receive my payouts.

What happened in the recent weeks that created this situation? What would help remedy this?

Thanks in advance, been loving zpool so far.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 04, 2017, 05:17:18 AM
That's the risk inherent in getting the payout in anything but BTC.  Not all coins get mined on a multipool, all the time, especially with the number of coins they have on this pool.  Honestly I would take the BTC payout and then buy the coins you want to keep.  I'm assuming you want to keep the Dash and not cash it out for USD.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SharkOne on June 04, 2017, 03:12:07 PM
How come that when looking at the x11 page, multiple coins are being mined at the same time? Shouldn't they all be mining the same, most profitable one?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: desynct on June 04, 2017, 03:33:01 PM
How came that when looking at the x11 page, multiple coins are being mined at the same time? Shouldn't they all be mining the same, most profitable one?

mining one coin at a time is obsolete technique, used by first gen multipools (miningpoolhub etc.),
it's less profitable than mining a bunch, especially on heavy-asic'd algos like x11 now.
do not forget that when pool applies its hashpower to a coin - that changes coin's profitability,
a smart pool like yiimp is designed for balanced hashpower distribution and autoswitching.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SharkOne on June 04, 2017, 03:38:17 PM
How came that when looking at the x11 page, multiple coins are being mined at the same time? Shouldn't they all be mining the same, most profitable one?

mining one coin at a time is obsolete technique, used by first gen multipools (miningpoolhub etc.),
it's less profitable than mining a bunch, especially on heavy-asic'd algos like x11 now.
do not forget that when pool applies its hashpower to a coin - that changes coin's profitability,
a smart pool like yiimp is designed for balanced hashpower distribution and autoswitching.


Ok I see. Thanks for the explanation!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 05, 2017, 08:56:10 PM
(0.004*1000)-2%0.08=3.92mBTC

yup, pretty close.  but that was 3.92 in the previous 24 hrs from that point in time.   notice it fluxes.... up and down.

It's like the newspaper.  Yesterdays news.

well, wrong...

pool fee is 2%, coin2btc exchange fee is 2%, miner fee is 2.5%, formula for total fee is (1-(1-fee1))*(1-fee2)*...)

1-0.98*0.98*0.975=1-0.93639= wooping 6.361%

yes;  there are compounding fees;  but;  zpool picks up tx fees. 

If the exchange used is yobit;  they only charge a .2% fee on exchanges;  and their tx fee is .0005..... not sure if this comes out of the sum or not....

What is this "miner fee" you speak of?  zpool only takes a flat 2%........ looks like you are counting this twice somehow.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 05, 2017, 09:12:48 PM
I assume, by miner fee, it would be a fee charged by the software dev for using a particular miner?  Claymore and EWBF would be the only ones that I use (that charge anything) and are pretty worth it since they put up the highest hashrate for their algos.

As far as I know ccminer doesn't charge anything and handles the majority of the algo's that I mine on zpool.  My miners spend less than 5% of their time on equihash normally so not much of a loss there.  Get equihash into ccminer and I wouldn't use anything else.

I tend to focus on how much I actually get at payout and less on the inner workings of the pool.  Comparing my average payouts to whattomine over the last 7 days and I'm beating their averages by quite a bit.  And of course you have to take whattomine with a grain of salt as well.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: VyprBTC on June 06, 2017, 07:16:48 AM
Is something wrong with the GUI again? my hash rate is showing up as 1/3'd of what my miner is reporting, 3GH/s only showing up as 1GH; 1GH only showing up as 350MH/s etc etc.

Thanks anyone.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: a4si on June 06, 2017, 07:21:04 AM
Hi guys,

quick question about hash rates.

The rig is 4x1070 + 2x1080Ti. On average Clocks +200to250, Memory -502, TDPs 75-80%

I'm mining skien with alexis78, miner shows cca 3975 MH/s while on pool statistic page I'm seeing anyhwere from 1,8-2,7 GH/s (and continue to drop...). It was OK before as it was showing 3,8-4,0 GH/s but cca 3 hours ago started to show wrong shares. Tried to restart the machine nothing helps, still showing to small number. Also my share before was up to 3%, now at 1,8-2,2%.

Any idea what is going on? It's pools statistic having issues - is anybody else seeing this problem?

Just want to be sure that I'm still getting my fair share of coins and that is jsut statistic what is wrong (i.e. cca 3% vs below 2% what is showing now; skien combinied hasrate of pool is showing currently 110 GH/s)

thx


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: VyprBTC on June 06, 2017, 07:40:26 AM
Hi guys,

quick question about hash rates.

The rig is 4x1070 + 2x1080Ti. On average Clocks +200to250, Memory -502, TDPs 75-80%

I'm mining skien with alexis78, miner shows cca 3975 MH/s while on pool statistic page I'm seeing anyhwere from 1,8-2,7 GH/s (and continue to drop...). It was OK before as it was showing 3,8-4,0 GH/s but cca 3 hours ago started to show wrong shares. Tried to restart the machine nothing helps, still showing to small number. Also my share before was up to 3%, now at 1,8-2,2%.

Any idea what is going on? It's pools statistic having issues - is anybody else seeing this problem?

Just want to be sure that I'm still getting my fair share of coins and that is jsut statistic what is wrong (i.e. cca 3% vs below 2% what is showing now; skien combinied hasrate of pool is showing currently 110 GH/s)

thx


I posted right above you - having the same issues - glad it's not just me!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: sp_ on June 06, 2017, 08:30:06 AM
(0.004*1000)-2%0.08=3.92mBTC

yup, pretty close.  but that was 3.92 in the previous 24 hrs from that point in time.   notice it fluxes.... up and down.

It's like the newspaper.  Yesterdays news.

well, wrong...

pool fee is 2%, coin2btc exchange fee is 2%, miner fee is 2.5%, formula for total fee is (1-(1-fee1))*(1-fee2)*...)

1-0.98*0.98*0.975=1-0.93639= wooping 6.361%

I just lost 40% of my profit when mining LBRY (exhchange fee) read more in this thread.

https://bitcointalk.org/index.php?topic=1951402.0


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: a4si on June 06, 2017, 02:39:21 PM
Seems that it stabilized now and went back to correct hashes for last couple of hours (no intervention from my side thus must be sth with pool....).

The "only" thing is lost profit for those 8 hours with issues.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: VyprBTC on June 06, 2017, 04:10:00 PM
Seems that it stabilized now and went back to correct hashes for last couple of hours (no intervention from my side thus must be sth with pool....).

The "only" thing is lost profit for those 8 hours with issues.



Yeah back to normalish. Hope those 8 hours weren't diverted.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 06, 2017, 07:23:47 PM
not quite back. switched back to nicehash this morning when I saw the reported hash zpool showed for me. switched back after and was good for a few hours, but now has "lost" 500 mhs on skein. back to nicehash


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 06, 2017, 07:45:27 PM
not quite back. switched back to nicehash this morning when I saw the reported hash zpool showed for me. switched back after and was good for a few hours, but now has "lost" 500 mhs on skein. back to nicehash

not sure what the problem can be. I've been watching the logs on myside and don't see anything funny going on.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 06, 2017, 08:21:55 PM
not quite back. switched back to nicehash this morning when I saw the reported hash zpool showed for me. switched back after and was good for a few hours, but now has "lost" 500 mhs on skein. back to nicehash

not sure what the problem can be. I've been watching the logs on myside and don't see anything funny going on.

Am running 5x 1080 ti and one 1080 one rig for 5200 mhs and just before I switched back to nicehash it was only giving me 4700 mhs. This morning when I woke up it was down to 1700 mhs on zpool.

edit: just switched back.
http://imgur.com/a/FamN2 http://imgur.com/a/FamN2
http://imgur.com/a/bd6Tp http://imgur.com/a/bd6Tp
so far so good, but watch and it will drop after a bit.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SharkOne on June 06, 2017, 08:43:21 PM
Just noticed the new Immature "counter". Thanks for that!

http://i.imgur.com/eoZ2HL6.png

By the way, I got some balance stuck on a Dash address, and since zpool is not mining Dash anymore, I might never be able to get those funds. Any chance to have them transfered as BTC?

Thanks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 06, 2017, 09:18:13 PM
Just noticed the new Immature "counter". Thanks for that!

http://i.imgur.com/eoZ2HL6.png

By the way, I got some balance stuck on a Dash address, and since zpool is not mining Dash anymore, I might never be able to get those funds. Any chance to have them transfered as BTC?

Thanks!

You can also send it to poloniex, bittrex or other exchange and sell for btc.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SharkOne on June 06, 2017, 09:19:37 PM
Just noticed the new Immature "counter". Thanks for that!

http://i.imgur.com/eoZ2HL6.png

By the way, I got some balance stuck on a Dash address, and since zpool is not mining Dash anymore, I might never be able to get those funds. Any chance to have them transfered as BTC?

Thanks!

You can also send it to poloniex, bittrex or other exchange and sell for btc.


I can't since it hasn't been paid to me since zpool doesn't own enough Dash to pay me...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 06, 2017, 09:20:48 PM
Just noticed the new Immature "counter". Thanks for that!

http://i.imgur.com/eoZ2HL6.png

By the way, I got some balance stuck on a Dash address, and since zpool is not mining Dash anymore, I might never be able to get those funds. Any chance to have them transfered as BTC?

Thanks!
what miner is that you are running?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 06, 2017, 09:21:32 PM
Just noticed the new Immature "counter". Thanks for that!

http://i.imgur.com/eoZ2HL6.png

By the way, I got some balance stuck on a Dash address, and since zpool is not mining Dash anymore, I might never be able to get those funds. Any chance to have them transfered as BTC?

Thanks!

You can also send it to poloniex, bittrex or other exchange and sell for btc.


I can't since it hasn't been paid to me since zpool doesn't own enough Dash to pay me...

OH dam that sucks!


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: SharkOne on June 06, 2017, 10:11:11 PM
Just noticed the new Immature "counter". Thanks for that!

http://i.imgur.com/eoZ2HL6.png

By the way, I got some balance stuck on a Dash address, and since zpool is not mining Dash anymore, I might never be able to get those funds. Any chance to have them transfered as BTC?

Thanks!
what miner is that you are running?

I'm using NemosMiner: https://bitcointalk.org/index.php?topic=1777336


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: flminer on June 07, 2017, 12:17:40 PM
not quite back. switched back to nicehash this morning when I saw the reported hash zpool showed for me. switched back after and was good for a few hours, but now has "lost" 500 mhs on skein. back to nicehash

not sure what the problem can be. I've been watching the logs on myside and don't see anything funny going on.

Am running 5x 1080 ti and one 1080 one rig for 5200 mhs and just before I switched back to nicehash it was only giving me 4700 mhs. This morning when I woke up it was down to 1700 mhs on zpool.

edit: just switched back.
http://imgur.com/a/FamN2 http://imgur.com/a/FamN2
http://imgur.com/a/bd6Tp http://imgur.com/a/bd6Tp
so far so good, but watch and it will drop after a bit.

was ok when I went to bed, but this morning am back to losing 500 mhs....

http://imgur.com/a/d7fWB

http://imgur.com/a/MsOvG

edit: Watched it for a bit and it looks like the variance for 5300 mhs is +300 to -500 mhs for a loss of 200 mhs average. Is this a normal variance? Seems it should be somewhat even plus and minus. Am still learning so looking to learn a bit.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: pikachuy on June 07, 2017, 01:47:24 PM
Anyway to set a minimum amount of BTC earned before processing payment? Like I would like to be paid every 0.1 BTC.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 07, 2017, 01:55:43 PM
Anyway to set a minimum amount of BTC earned before processing payment? Like I would like to be paid every 0.1 BTC.

Unfortunately no, there's not a way for that.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 07, 2017, 03:17:52 PM
Appears my accepted speeds are off by a factor of 1000...... Mining Blake's.

Something is wrong


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 07, 2017, 03:27:59 PM
http://i.imgur.com/nWoN1eR.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 07, 2017, 03:37:56 PM
notice on balance graph how the pending total balance resumed higher....

This is a issue that arises;  graphs get disrupted, but everything is still mining and working under the hood.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 07, 2017, 03:38:28 PM
I'm seeing similar, getting 800 Mh/s when it should be 17 GH/s.  Not sure if it's affecting pay or not yet.

EDIT:  It is definitely affecting profit . . . mine has flatlined since the last payout which is when blake2s profitability went up.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 07, 2017, 04:23:57 PM
Same for me...blake2s hashrate on the pool looks way off :(

https://i.imgur.com/w0SaM5r.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 07, 2017, 04:32:47 PM
well, if your machine is spitting out a million low value shares a minute, its going to report low hashrate.....  are you using manual diff?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: TheOATeam on June 07, 2017, 04:41:28 PM
Same here, 5x1060. 1x 1070 rig: 16.46 GH on console, but only 750 MH on the site:
http://imgur.com/a/vuevt


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 07, 2017, 04:44:24 PM
well, if your machine is spitting out a million low value shares a minute, its going to report low hashrate.....  are you using manual diff?

It's not a local issue.

pool or network.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: TheOATeam on June 07, 2017, 04:52:18 PM
Seems like the pool is having problems, I started mining with another rig and this rig isn't showing any hashrate right now at all on the site.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 07, 2017, 04:58:19 PM
Seems to only be effecting the blake2s pool at the moment.  I've removed it from my scripts and other algos seem to be mining fine.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 07, 2017, 05:02:43 PM
I don't see anything out of the ordinary in the logs but I just restarted the blake2s stratum for grins.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 07, 2017, 05:05:03 PM
I wonder if it is related to Verge Coin


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 07, 2017, 05:08:03 PM
I don't see anything out of the ordinary in the logs but I just restarted the blake2s stratum for grins.

Mine appear to be working correctly again.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 07, 2017, 05:13:20 PM
Yep, that restart fixed it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 07, 2017, 05:14:47 PM
Yep, that restart fixed it.

restarting your miner would have as well I suspect.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 07, 2017, 05:17:05 PM
I switch algo's regularly based on profit so it had been.  Miner was reporting no issue and showing full hashrate as usual.

All is well though, so thanks for the quick response.

Yep, that restart fixed it.

restarting your miner would have as well I suspect.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 07, 2017, 05:40:52 PM
Yep, that restart fixed it.

restarting your miner would have as well I suspect.

Restarted a few of my miners this morning and it stayed the same, but the restart on your side sorted it out!

Thank you :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 07, 2017, 09:24:25 PM
Something still doesnt appear right. Graph is very flat after the restart.

http://i.imgur.com/pPkfxDB.png

http://i.imgur.com/HBVWwjV.png




Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 08, 2017, 11:31:20 AM
seems to be happening again for skien... did you do any recent changes or updates?

should be ~1Gh, seeing 490Mh...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Harunn on June 08, 2017, 08:58:31 PM
Helllo,

Just started todat with Zpool, after  5 hours mining i had 0.0013xxxxx after a half hour i went looking and i had 0.00105972 how is this even possible ??


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 08, 2017, 09:02:32 PM
Helllo,

Just started todat with Zpool, after  5 hours mining i had 0.0013xxxxx after a half hour i went looking and i had 0.00105972 how is this even possible ??

Exchange price drops


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Harunn on June 08, 2017, 09:26:41 PM
Where can i find grafics from this or some actiual info?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 08, 2017, 09:51:55 PM
Where can i find grafics from this or more info?

check the exchanges. Your balance will never change once it been posted.  (total pending) and Total Unpaid **** will fluctuate.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on June 08, 2017, 10:04:53 PM
skein is doing well for me but  Once in a while bizarre stuff happens


this address always worked

http://zpool.ca/?address=16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

this one has been weird but is pretty much working now.

http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

Things I would like a history of payouts for my addresses.

I can't seem to find any beyond the current day.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 08, 2017, 10:14:52 PM
skein is doing well for me but  Once in a while bizarre stuff happens


this address always worked

http://zpool.ca/?address=16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

this one has been weird but is pretty much working now.

http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

Things I would like a history of payouts for my addresses.

I can't seem to find any beyond the current day.

Click the total paid balance


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: philipma1957 on June 09, 2017, 01:52:20 AM
skein is doing well for me but  Once in a while bizarre stuff happens


this address always worked

http://zpool.ca/?address=16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

this one has been weird but is pretty much working now.

http://zpool.ca/?address=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

Things I would like a history of payouts for my addresses.

I can't seem to find any beyond the current day.

Click the total paid balance

found it and it is exactly what I wanted thank you.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 10, 2017, 01:21:38 AM
ok i am trying to set my strattum dif with nemosminer and tried several things   i still want to make it profit switch.   i tried several things but i am not getting the algos to stay on a strattum dif where i want them. is there a command i can use to set all the difs for each algo so it profit switches and uses my d=      setting for each algo?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 10, 2017, 07:06:30 AM
BLAKE2S DOWN AGAIN.

PLEASE RESET STRATUM


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 10, 2017, 12:18:22 PM
Something wrong with equihash stratum?  No statistics on web page, but miners mining away as if nothing is wrong.

Xevan is starting to exhibit the same symptoms.

Edit: now the web page is saying "internal server error" on the browser title bar and shows a blank page.
Edit2: web page is back.  Now so is equihash.  Xevan still says 0 miners are mining....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 11, 2017, 12:09:48 AM
Something wrong with equihash stratum?  No statistics on web page, but miners mining away as if nothing is wrong.

Xevan is starting to exhibit the same symptoms.

Edit: now the web page is saying "internal server error" on the browser title bar and shows a blank page.
Edit2: web page is back.  Now so is equihash.  Xevan still says 0 miners are mining....

nothing wrong with the stratum    the web page does that around payout time and is no big issue the miners keep mining away.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 11, 2017, 04:55:48 AM
Not sure whats happening but there does seem to be more stability issues than usual lately.

As of 9:50 PST, the equihash pool seems to not be accepting hashes again.  Restarted miners and such, to no effect.  I've removed it from my list for now.  I will probably need to add some code for this type of event and better handling on my end to switch off an algo that's not responding or hashing at the proper rate.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: TheOATeam on June 11, 2017, 08:01:34 AM
This pool could really be great, but I keep getting issues - my hashrates locally for lyra2v2 are around 350 MH/s but the interface and credit output tell me im getting only 100 MH total. Same for blake2s, should have around 75GH/s, but now I am only getting 40 GH/s. Sometimes, one of my rigs running blake2s will show only 50 MH/s despite running 15GH/s in the interface. Where is all of this credit going??

Also, a couple times a day it seems the pool is getting DDOSed or something with all of my machines not being able to connect and the website being down. My profitability has dropped off significantly in the past couple of days because of this.

Is this an issue on my end? It seems like some other people are having similar problems in this thread.
Gonna move some rigs over to a ZCL pool for now until the others seem to work well.

Thanks for all your work on this zpool! I know you'll get the issues fixed.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: laozihenshuai on June 11, 2017, 12:07:27 PM
It seems Zencash and Hush are removed from the equihash pool? why?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 11, 2017, 12:12:35 PM
It seems Zencash and Hush are removed from the equihash pool? why?

uhh hush is there and zcash will get enabled when there is more hashrate. Pointless to waste hash on it when it can take 36+hours to find a block, with good luck.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: laozihenshuai on June 11, 2017, 01:03:55 PM
It seems Zencash and Hush are removed from the equihash pool? why?

uhh hush is there and zcash will get enabled when there is more hashrate. Pointless to waste hash on it when it can take 36+hours to find a block, with good luck.

Hush is not enabled. Currently only 2 coins in the pool.

Now Hush is there..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 11, 2017, 05:01:06 PM
Does the pool take into account DOM (depth of market) when it is figuring which coin to mine? Some of the smaller coins might have a much higher top bid for a buy, but they then fall off quickly. So performing a market sell might produce much lower results than originally thought.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 11, 2017, 05:10:45 PM
Wow, the total pool Hashrate for scrypt has jumped a lot the past week. I remember a month ago it was between 1GH-3GH. up to 17GH now.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 11, 2017, 05:47:15 PM
Wow, the total pool Hashrate for scrypt has jumped a lot the past week. I remember a month ago it was between 1GH-3GH. up to 17GH now.

yes, the profitability is attracting more and more miners across the board. Our site has seen a 15M hit a month increase this past month. Surpassing 45M hits a month now with nearly 60k unique visitors.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 12, 2017, 03:32:34 AM
Anyone have a recommendation how often I should switch doing Multialgo with Multipoolminer?  Default is potentially every 60 seconds, but I'm thinking that might be too quick to really do much for each coin it mines.  I've been running it less than a day and it seems like it is going alright so far.  Just trying to get a feel what others are doing.

Running 7x1080 + 1x1080Ti in 3 different machines.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 12, 2017, 03:38:10 AM
I only mine 2 algos at a time. I wanted to switch less than 10 times in a 24 hour period.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 12, 2017, 03:39:40 AM
With BTC transaction fees getting a little ridiculous. What are the chances getting paid in ETH?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 12, 2017, 04:08:50 AM
With BTC transaction fees getting a little ridiculous. What are the chances getting paid in ETH?
I dont think theres code int he pool to handle it automatically...   if we mined it (if it was possible) then that would be a different story...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: minerx117 on June 12, 2017, 06:40:17 AM
nist5=AM I A MILLIONAIRE? ? ? ?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 12, 2017, 06:43:19 AM
nist5=AM I A MILLIONAIRE? ? ? ?

If you are then I am too.  Not just you


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: ZacsCustom on June 12, 2017, 06:48:16 AM
Seems like a major glitch is going on, wonder what's going to happen  ???


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 12, 2017, 06:52:30 AM
Actually the Electra Super Reward Bonanza stage appears to be here.  Per the thread blocks for the next 24 hours will create 19 billion ECA.

https://bitcointalk.org/index.php?topic=1848351.0

Hmmm wonder what is actually going to happen with these.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Storx on June 12, 2017, 06:57:22 AM
idk whats going on.. says i have 132,808 BTC earned... on Nist5


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 12, 2017, 06:58:57 AM
Well, its been taking 2 days to confirm a block in the past, so I suspect the first ones to confirm will be the first to market.  The first ones might make some cash, but the value it going to drop like a rock.

Just have to wait and see . . . I'm hoping to make some decent cash since my scripts started mining it as soon as the block value changed and the profit went sky high.

Check Jaerin's link there for an explanation.  Its not a glitch, just a change in block payments which is reflecting against the one exchange that has Electra coin.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 12, 2017, 07:46:50 AM
Well, its been taking 2 days to confirm a block in the past, so I suspect the first ones to confirm will be the first to market.  The first ones might make some cash, but the value it going to drop like a rock.

Just have to wait and see . . . I'm hoping to make some decent cash since my scripts started mining it as soon as the block value changed and the profit went sky high.

Check Jaerin's link there for an explanation.  Its not a glitch, just a change in block payments which is reflecting against the one exchange that has Electra coin.

The problem is hopefully zpool's code can handle it because there is no market for it basically.   I'm stopping all nist mining until we see what's going to happen.  There was virtually no market for the coin originally, I highly doubt there is one that's suddenly going to form after the release of 19 billion coins.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: miliard on June 12, 2017, 10:28:57 AM
The problem is hopefully zpool's code can handle it because there is no market for it basically.   I'm stopping all nist mining until we see what's going to happen.  There was virtually no market for the coin originally, I highly doubt there is one that's suddenly going to form after the release of 19 billion coins.

And it's 0 now...


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 12, 2017, 02:22:37 PM
Crackfoo, what's going to happen to what we mined since you seem to have turned off Electra?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 12, 2017, 03:16:04 PM
Crackfoo, what's going to happen to what we mined since you seem to have turned off Electra?

https://bitcointalk.org/index.php?topic=1848351.msg19515436#msg19515436

Consider it worthless. Can see if the Electra dev will pay the difference of "11M BTC".


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: jwarren81 on June 12, 2017, 03:57:48 PM
Obviously I'm not expecting that much.  Why not dump it on the market and see what it does?  I don't care if it's left off for mining but at least throw the mined blocks on the market after they confirm and see where the price lands.  May be 0 maybe a little bit.

If you don't want to deal with it I'd rather get the block my self and see what it does.  Not expecting much but I'd still like to see what the market does with it.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 12, 2017, 04:15:39 PM
Obviously I'm not expecting that much.  Why not dump it on the market and see what it does?  I don't care if it's left off for mining but at least throw the mined blocks on the market after they confirm and see where the price lands.  May be 0 maybe a little bit.

If you don't want to deal with it I'd rather get the block my self and see what it does.  Not expecting much but I'd still like to see what the market does with it.

There is no market for it.  The only buy orders are about .25BTC and that's likely because they have no clue that these coins are coming.  It will take another day at least to get coins paid out and then likely another 48 hours to get them to the exchange.  The first person to do that is going to wipe the market and then it's over.  What is the reason anyone would buy this coin?  Transactions that take 2 days?  If you want some coins just go mine on the eca.acc-pool.pw which is the main pool.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 12, 2017, 04:16:29 PM
Is there a zpool slack channel?

And...if there is can I please get an invite :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: 95do on June 12, 2017, 05:19:27 PM
if i mine verge coin how long does it take to get paid in verge coin to my wallet
thank you


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 12, 2017, 06:05:30 PM
Obviously I'm not expecting that much.  Why not dump it on the market and see what it does?  I don't care if it's left off for mining but at least throw the mined blocks on the market after they confirm and see where the price lands.  May be 0 maybe a little bit.

If you don't want to deal with it I'd rather get the block my self and see what it does.  Not expecting much but I'd still like to see what the market does with it.

I can't pause one coin so I have to keep it disabled and 0 sat. Once the coins mature pending balances are automatically moved to actual balances and that would create havoc for me of I didn't disable them. The market will be empty and I'll have a bag of crap I can't sell, but have already credited miners BTC the coins won't earn.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 12, 2017, 07:32:16 PM
Is there a way to get a reading from the zpool website how much you're earning on average per hour between all your miners?

I see a graph of account balance, but it would be nice if we could maybe get a graph of aggregate earnings.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: ZacsCustom on June 12, 2017, 07:33:45 PM
Obviously I'm not expecting that much.  Why not dump it on the market and see what it does?  I don't care if it's left off for mining but at least throw the mined blocks on the market after they confirm and see where the price lands.  May be 0 maybe a little bit.

If you don't want to deal with it I'd rather get the block my self and see what it does.  Not expecting much but I'd still like to see what the market does with it.

I can't pause one coin so I have to keep it disabled and 0 sat. Once the coins mature pending balances are automatically moved to actual balances and that would create havoc for me of I didn't disable them. The market will be empty and I'll have a bag of crap I can't sell, but have already credited miners BTC the coins won't earn.
Thanks for the update! :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 12, 2017, 08:41:36 PM
something up with equihash??


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 13, 2017, 01:03:37 AM
I've noticed this a some time now but I'm not sure what is going on. It appears during around the time of a payout mining is slowed. Anyone else notice this?


http://i.imgur.com/2iluz6b.png

http://i.imgur.com/O3Xymoc.png






Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Storx on June 13, 2017, 01:38:10 AM
is anyone else getting low earnings on zpool today? my 4xGTX1080tis have been doing like 95% blake2s since the nist5 issue this morning.. ive only make around $6.50 worth of btc since restarting the miner with nist5 disabled at 8am this morning...so $6.50 on 4 cards over 13 hour period....


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 13, 2017, 02:01:38 AM
Obviously I'm not expecting that much.  Why not dump it on the market and see what it does?  I don't care if it's left off for mining but at least throw the mined blocks on the market after they confirm and see where the price lands.  May be 0 maybe a little bit.

If you don't want to deal with it I'd rather get the block my self and see what it does.  Not expecting much but I'd still like to see what the market does with it.

I can't pause one coin so I have to keep it disabled and 0 sat. Once the coins mature pending balances are automatically moved to actual balances and that would create havoc for me of I didn't disable them. The market will be empty and I'll have a bag of crap I can't sell, but have already credited miners BTC the coins won't earn.

the new low dif worked perfect on the blake2s pool thanks again.





Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: sypher9 on June 13, 2017, 02:20:59 AM
is anyone else getting low earnings on zpool today? my 4xGTX1080tis have been doing like 95% blake2s since the nist5 issue this morning.. ive only make around $6.50 worth of btc since restarting the miner with nist5 disabled at 8am this morning...so $6.50 on 4 cards over 13 hour period....

Same problem for me with 2x 1080Ti's. I switched to MPH in the meantime, until the blake2s issue gets resolved (or whatever is going on). I avereged 15 USD for the last 24 hours ending at 18:00 EST today.

Multipoolminer/MPH is reporting ~ 30 USD/day, but frankly, I don't know if I can trust those estimates. MPH refreshes the balance every 6-8h and since I switched my autoexchange to Ethereum, it will probably take even longer until I see values appear in the balance page.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Storx on June 13, 2017, 02:22:27 AM
is anyone else getting low earnings on zpool today? my 4xGTX1080tis have been doing like 95% blake2s since the nist5 issue this morning.. ive only make around $6.50 worth of btc since restarting the miner with nist5 disabled at 8am this morning...so $6.50 on 4 cards over 13 hour period....

Same problem for me with 2x 1080Ti's. I switched to MPH in the meantime, until the blake2s issue gets resolved (or whatever is going on). I avereged 15 USD for the last 24 hours ending at 18:00 EST today.

15 on zpool or MPH?


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: sypher9 on June 13, 2017, 02:32:08 AM
is anyone else getting low earnings on zpool today? my 4xGTX1080tis have been doing like 95% blake2s since the nist5 issue this morning.. ive only make around $6.50 worth of btc since restarting the miner with nist5 disabled at 8am this morning...so $6.50 on 4 cards over 13 hour period....

Same problem for me with 2x 1080Ti's. I switched to MPH in the meantime, until the blake2s issue gets resolved (or whatever is going on). I avereged 15 USD for the last 24 hours ending at 18:00 EST today.

15 on zpool or MPH?

15 USD on Zpool over the last 24h ending at 18h00 EST. I got sucked into the nist5 mining as well for approx 6 of those hours.
from 6h00 to 18h00 EST, I made ~ 7USD/~0.00284 BTC.

However, I'm not sure how to interpret the immature mBTC values. http://i.imgur.com/J5ps9D9.jpg


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 13, 2017, 03:11:36 AM
I don't know, I think something odd is going on. I don't how my graph can look so upward and straight for 10 hours and then when a payment goes out it is flat.


http://i.imgur.com/ehUNKu0.png

http://i.imgur.com/mM4Ombw.png

http://i.imgur.com/WJR6mqE.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: kopija on June 13, 2017, 03:46:08 AM
I don't know, I think something odd is going on. I don't how my graph can look so upward and straight for 10 hours and then when a payment goes out it is flat.




There is nothing odd going on. Zpool has been having those issues with payments graph for WEEKS.
ATM my payments graph has been totally flat for almost whole day. It looks like in need of Viagra.
http://zpool.ca/?address=1PjoqGuqbvB6GVjv8bZmSMxSDRF3nzRmJa
Come on crackfoo, fix this already, this issue has been the bane of many a noob mining on zpool for too long.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 13, 2017, 03:49:37 AM
I don't know, I think something odd is going on. I don't how my graph can look so upward and straight for 10 hours and then when a payment goes out it is flat.




There is nothing odd going on. Zpool has been having those issues with payments graph for WEEKS.
ATM my payments graph has been totally flat for almost whole day. It looks like in need of Viagra.
http://zpool.ca/?address=1PjoqGuqbvB6GVjv8bZmSMxSDRF3nzRmJa
Come on crackfoo, fix this already, this issue has been the bane of many a noob mining on zpool for too long.

Look at the scale on the graph...you're not going to see your "normal" curved one until the mess from nist5 drops off in ~4 hours


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: pindis on June 13, 2017, 09:22:53 AM
https://i.imgur.com/sr9TWSM.png
I realise this might just be me, but is there a reason why we're mining mobilecash, since it doesn't even pay anything (at least not for me). I realise some people have more hashrate and that they receieve some coins. but yeah.. I dont know


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: miliard on June 13, 2017, 09:53:22 AM
https://i.imgur.com/sr9TWSM.png
I realise this might just be me, but is there a reason why we're mining mobilecash, since it doesn't even pay anything (at least not for me). I realise some people have more hashrate and that they receieve some coins. but yeah.. I dont know

Same problem here, and the overall earnings last 24h are terrible. Dunno what is going on..
https://i.imgur.com/VcyDz1k.png


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 13, 2017, 01:23:01 PM
https://i.imgur.com/sr9TWSM.png
I realise this might just be me, but is there a reason why we're mining mobilecash, since it doesn't even pay anything (at least not for me). I realise some people have more hashrate and that they receieve some coins. but yeah.. I dont know

It's just your share is so low it's not shown because of the decimal places are limited to four.
For example...the coin paid 0.02391 and your share was 0.118% which equals 0.0000282138

You can see there are 2,3 and sometimes 4 or more per minute so they are adding up at the end of the day :)


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: pindis on June 13, 2017, 02:43:29 PM
https://i.imgur.com/sr9TWSM.png
I realise this might just be me, but is there a reason why we're mining mobilecash, since it doesn't even pay anything (at least not for me). I realise some people have more hashrate and that they receieve some coins. but yeah.. I dont know

It's just your share is so low it's not shown because of the decimal places are limited to four.
For example...the coin paid 0.02391 and your share was 0.118% which equals 0.0000282138

You can see there are 2,3 and sometimes 4 or more per minute so they are adding up at the end of the day :)
Looks like they changed the decimals now! :) I hope this is still profitable over ETH.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 13, 2017, 04:10:26 PM
So is the checkbox that shows you the earnings by each individual altcoins coming back?  It was nice to have that kind of data.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 13, 2017, 04:24:19 PM
Seems like the d=xxx diff setting doesn't work when combined with the multialgos method of mining.

Tried the following and it never seems to pick up the fixed diff:

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -c=BTC,myr-gr=95,lyra2v2=50,decred=3.55,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats,d=64

Yet when it kicked off it used the stratum difficulty which starts out much too low.

Do I need to set a diff for each coin or something?  At this point I've just  been adding a -m 8 for blake2s so it ramps up the difficult quicker.  If I use the following it picks up the difficulty just fine:

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -c=BTC,stats,d=64

This is just the one line I have from Nemo's miner batch script.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 13, 2017, 04:32:33 PM
Seems like the d=xxx diff setting doesn't work when combined with the multialgos method of mining.

Tried the following and it never seems to pick up the fixed diff:

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -c=BTC,myr-gr=95,lyra2v2=50,decred=3.55,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats,d=64

Yet when it kicked off it used the stratum difficulty which starts out much too low.

Do I need to set a diff for each coin or something?  At this point I've just  been adding a -m 8 for blake2s so it ramps up the difficult quicker.  If I use the following it picks up the difficulty just fine:

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -c=BTC,stats,d=64

This is just the one line I have from Nemo's miner batch script.


Have you tried putting the d=64 at the beginning of the password?

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -d=64,c=BTC,myr-gr=95,lyra2v2=50,decred=3.55,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats

Also, do you need c=BTC?  I don't have that, and zpool already pays me in BTC.

What GPU do you have?  Just wondering how that profitability factor works.  I kept mine blank (default factor of 1).

I'd like to learn how to d calculate the factor based on my rig.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: zer0k on June 13, 2017, 04:39:59 PM
Seems like the d=xxx diff setting doesn't work when combined with the multialgos method of mining.

Tried the following and it never seems to pick up the fixed diff:

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -c=BTC,myr-gr=95,lyra2v2=50,decred=3.55,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats,d=64

Yet when it kicked off it used the stratum difficulty which starts out much too low.

Do I need to set a diff for each coin or something?  At this point I've just  been adding a -m 8 for blake2s so it ramps up the difficult quicker.  If I use the following it picks up the difficulty just fine:

ccminer -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u %ADDY% -p -c=BTC,stats,d=64

This is just the one line I have from Nemo's miner batch script.


All of the numbers after each mining algorithm are your hashrates so that the pool can decide which coin is most profitable.
They are not setting the difficulty at all and you need to use d=X as you have in your last command.

If you're not getting tons of rejects at super low difficulty you can just leave it and let the pool adjust for you.
Or try adding d=2 or something right at the beggining, but that may actually be a little high for some coins.
It's obviously better, but more work to split them all up and have custom difficulty for each one.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 13, 2017, 04:51:43 PM
All of the numbers after each mining algorithm are your hashrates so that the pool can decide which coin is most profitable.
They are not setting the difficulty at all and you need to use d=X as you have in your last command.

So if my rig is getting a total of 1.2ksol/s for Equihash, my factor would be -p equihash=1200?

BTW, I noticed you have a -p -c=BTC,etc,etc,etc.  I think the dash before the c=BTC is your problem.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 13, 2017, 04:58:08 PM
All of the numbers after each mining algorithm are your hashrates so that the pool can decide which coin is most profitable.
They are not setting the difficulty at all and you need to use d=X as you have in your last command.

So if my rig is getting a total of 1.2ksol/s for Equihash, my factor would be -p equihash=1200?

BTW, I noticed you have a -p -c=BTC,etc,etc,etc.  I think the dash before the c=BTC is your problem.

Nope the dash was a typo in the post when I tried to reconstruct the whole string from the batch file. I've tried with the d=xxx at the beginning or the end and it doesn't seem to take effect unless I take out the multialgo factors.

Not sure about equihash, but all the other difficulties seem to be measured in MH/s with the exception of blake2s, decred, blakecoin which since seem to be measured in GH the pool does the proper comparison at least it seems too.

So what I did was actually use Multipoolminer on zpool and just let it benchmark all the algos that I wanted to use and then filled in the numbers that I got.  You could do the same with anything else and just run each algo for a bit and change the number to be what you averaged.  As I said not sure if you would do 1.2 for equihash or 1200, but for blake2s it seems you put the number in GH/s.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 13, 2017, 05:15:21 PM
So it appears if you include decred in your multialgo it doesn't pick up the difficulty.

Tried this (decred at the end):
Code:
ccminerAlexis78.exe -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u 1B5NVnLrXRjzEsmBkSZiXpLbdmVn6qC5q -p d=32,myr-gr=95,lyra2v2=50,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,decred=3.55,stats

or this (decred at the beginning):

Code:
ccminerAlexis78.exe -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u 1B5NVnLrXRjzEsmBkSZiXpLbdmVn6qC5q -p d=32,decred=3.55,myr-gr=95,lyra2v2=50,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats

And it didn't pick up the difficulty from the d=32

Tried this:
Code:
ccminerAlexis78.exe -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u 1B5NVnLrXRjzEsmBkSZiXpLbdmVn6qC5q -p d=32,myr-gr=95,lyra2v2=50,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats

And it does pick up the 32 difficulty.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: guytechie on June 13, 2017, 05:40:54 PM
So it appears if you include decred in your multialgo it doesn't pick up the difficulty.

Tried this (decred at the end):
Code:
ccminerAlexis78.exe -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u 1B5NVnLrXRjzEsmBkSZiXpLbdmVn6qC5q -p d=32,myr-gr=95,lyra2v2=50,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,decred=3.55,stats

or this (decred at the beginning):

Code:
ccminerAlexis78.exe -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u 1B5NVnLrXRjzEsmBkSZiXpLbdmVn6qC5q -p d=32,decred=3.55,myr-gr=95,lyra2v2=50,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats

And it didn't pick up the difficulty from the d=32

Tried this:
Code:
ccminerAlexis78.exe -r 0 -a blake2s -o stratum+tcp://blake2s.mine.zpool.ca:5766 -u 1B5NVnLrXRjzEsmBkSZiXpLbdmVn6qC5q -p d=32,myr-gr=95,lyra2v2=50,blakecoin=6.75,c11=22.5,groestl=50,blake2s=5.45,x17=12,nist5=60,skein=720,sib=16.5,lbry=380,timetravel=36,veltor=29,bitcore=18.9,hmq1725=5.6,stats

And it does pick up the 32 difficulty.


Sounds like it took a lot of trial and error.  You, sir, are more patient and persistent than I.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 13, 2017, 05:50:08 PM
yeah for some reason having decred in there will null your diff setting. It's been attempted to be fixed a couple times now but seems it still screws it up.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 13, 2017, 05:54:45 PM
Well my first thought was just that it was too long.  So I started erasing a bunch of things and it wasn't until I started erasing the ones before blake2s that it started working.   I had a post half written thinking it was just too long until I decided to go back and make sure it wasn't just too far from the beginning or something like that.  I was adding things to the beginning until it failed again and noticed that when I added a long string without decred in it that it still worked.  That's when I realized my initial thought was wrong and that it was decred that was causing the issues.

I'm an IT support person so doing trial and error is pretty much in my nature.  Still working on stabilizing using Multipoolminer since that gives nice output and such, but I'm wondering if the pools multialgo method is still going to be more efficient since it cuts you off when it knows something else is more profitable.  Also not sure I like how Multipoolminer just kills the process when it switches to something else.  Not sure what that might do in the long run.


Also those numbers were basic averages for a single 1080 card.  I have a box with 5x1080, one with 1x1080, and one with 1x1080 and 1x1080Ti so the numbers all pretty much are the same ratios between the cards.  Haven't really had it stable enough to get a good feel for how much I'll earn in a day from zpool.  hmq1725 was causing bluescreens on my main miner until I realized I needed to set the intensity down to 17 from the default of 19 it was selecting.   Much more stable now.



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 13, 2017, 05:59:37 PM
So is the checkbox that shows you the earnings by each individual altcoins coming back?  It was nice to have that kind of data.

Not yet, I haven't had time to look into it.  Been working on a new fee system (FlexFee™) and currently testing it on scrypt/lyra2v2 & sha256.

I'll soon be implementing this type of fee system across most algo's. The more hash the pool has, the lower the fee will be!

Current thresholds are:

        scrypt under 5Gh=2.25%, 5Gh-10Gh=2% & 10Gh+=1.75%

        sha256 under 500Gh=2.25%, 500Gh-1Ph=2%, 1Ph-5Ph=1.75 & 5Ph+=1.5%

        lyra2v2 under 5Gh=2.25%, 5Gh-10Gh=2%, 10Gh-25Gh=1.75 & 25Gh+=1.5%

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 13, 2017, 06:04:15 PM
So is the checkbox that shows you the earnings by each individual altcoins coming back?  It was nice to have that kind of data.

Not yet, I haven't had time to look into it.  Been working on a new fee system and currently testing it on scrypt/lyra2v2 & sha256.

I'll soon be implementing this type of fee system across most algo's. The more hash the pool has, the lower the fee will be!

Current thresholds are:

        scrypt under 5Gh=2.25%, 5Gh-10Gh=2% & 10Gh+=1.75%

        sha256 under 500Gh=2.25%, 500Gh-1Ph=2%, 1Ph-5Ph=1.75,5Ph+=1.5%

        lyra2v2 under 5Gh=2.25%, 5Gh-10Gh=2%, 10Gh-25Gh=1.75, 25Gh+=1.5%

Cheers

So is this intended to keep people from algo hopping too much?  I'd guess the hash rate may fluctuate a lot depending on the profitability.  I'm sure there are some that stick to one or two hashes, but for someone using multialgo this might cause a lot of variance in fees.  Granted the fees are fairly low overall, but likely would have to be figured into the profitability somehow.

yeah for some reason having decred in there will null your diff setting. It's been attempted to be fixed a couple times now but seems it still screws it up.

Can you confirm what number we should use for equihash since it comes usually in KH/s?



Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: crackfoo on June 13, 2017, 10:48:04 PM
So is the checkbox that shows you the earnings by each individual altcoins coming back?  It was nice to have that kind of data.

Not yet, I haven't had time to look into it.  Been working on a new fee system (FlexFee™) and currently testing it on scrypt/lyra2v2 & sha256.

I'll soon be implementing this type of fee system across most algo's. The more hash the pool has, the lower the fee will be!

Current thresholds are:

        scrypt under 5Gh=2.25%, 5Gh-10Gh=2% & 10Gh+=1.75%

        sha256 under 500Gh=2.25%, 500Gh-1Ph=2%, 1Ph-5Ph=1.75 & 5Ph+=1.5%

        lyra2v2 under 5Gh=2.25%, 5Gh-10Gh=2%, 10Gh-25Gh=1.75 & 25Gh+=1.5%

Cheers

Added x11 as well.

       x11 under 20Gh=2.25%, 20Gh-50Gh=2%, 50Gh-100Gh=1.75 & 100Gh+=1.5%


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 13, 2017, 11:24:22 PM
i am not sure what is up with the immature shares on blake2s, i have immature shares in the couple hundreds now that has been building up since yesterday.. is it backed up?>


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 13, 2017, 11:28:50 PM
i am not sure what is up with the immature shares on blake2s, i have immature shares in the couple hundreds now that has been building up since yesterday.. is it backed up?>

Netko takes about 48 hours to confirm blocks. Shares can't get backed up on just one algo. If something backs up it shows on all algos


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 14, 2017, 12:19:53 AM
i am not sure what is up with the immature shares on blake2s, i have immature shares in the couple hundreds now that has been building up since yesterday.. is it backed up?>

Netko takes about 48 hours to confirm blocks. Shares can't get backed up on just one algo. If something backs up it shows on all algos

Ok thanks, just so use to seeing them exchanged like within 30 minutes.. thought maybe my account was jacked up or something and the blake2s was just adding to the issues, because in 3 payouts a payout has not been triggered on my account and im at 1/4 btc unpaid.. last time this happened it took 2 days before it finally payed me


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 14, 2017, 01:04:10 AM
Still seeing some odd things around payout time.

http://i.imgur.com/IkwiRle.png

http://i.imgur.com/JrDD5Js.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 14, 2017, 01:13:15 AM
What exchange is used for Netko?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: SharkOne on June 14, 2017, 03:51:38 AM
I'm currently having a look at the API and there's something I don't understand.

Quote
"bitcore":{ 
      "name":"bitcore",
      "port":3556,
      "coins":1,
      "fees":2,
      "hashrate":529168602,
      "workers":14,
      "estimate_current":"0.00015663",
      "estimate_last24h":"0.00015508",
      "actual_last24h":"0.17900",
      "hashrate_last24h":294483128.4,
      "rental_current":"0.23995455"
   },

It seems that "actual_last24h" is the same value as displayed on the website, however the "estimate_current" and "estimate_last24" seem to be by a factor of 1000? Is it a different unit?

Which value is used to compute the autoswitching?

Thanks!



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: a4si on June 14, 2017, 06:15:04 AM
i am not sure what is up with the immature shares on blake2s, i have immature shares in the couple hundreds now that has been building up since yesterday.. is it backed up?>

Netko takes about 48 hours to confirm blocks. Shares can't get backed up on just one algo. If something backs up it shows on all algos

Does this mean also that at least 48 hours pases before Netko can be sent to exchange in to BTC? If so does it still make sense to mine it given the fact that in long period of 48 hours it's vale may crash and thus be more safer for us to stay and mine only Verge, Taj and other coins which have quick turaround?

I'm just asking to understan how this works, not criticizing;)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: miliard on June 14, 2017, 08:08:19 AM
I'm currently having a look at the API and there's something I don't understand.

Quote
"bitcore":{ 
      "name":"bitcore",
      "port":3556,
      "coins":1,
      "fees":2,
      "hashrate":529168602,
      "workers":14,
      "estimate_current":"0.00015663",
      "estimate_last24h":"0.00015508",
      "actual_last24h":"0.17900",
      "hashrate_last24h":294483128.4,
      "rental_current":"0.23995455"
   },

It seems that "actual_last24h" is the same value as displayed on the website, however the "estimate_current" and "estimate_last24" seem to be by a factor of 1000? Is it a different unit?

Which value is used to compute the autoswitching?

Thanks!



First 2 are in BTC and actual_last24h is in mBTC


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cryptoinvestor_x on June 14, 2017, 03:10:13 PM
Seems Blake2s is having issues again with reported hashrates.

Miner displays correct speeds and share submitted but site shows 10% and is effectively reducing percentage of block rewards mined.

Anyone else running into the issue?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 14, 2017, 03:40:59 PM
Seems Blake2s is having issues again with reported hashrates.

Miner displays correct speeds and share submitted but site shows 10% and is effectively reducing percentage of block rewards mined.

Anyone else running into the issue?

I've been only running on this pool for a couple of days and notice that my earnings are fairly significantly lower than I expected them to be.  I've had a few outages and non-optimal things running, but still only getting .0127BTC from 7-GTX1080's and 1 GTX1080Ti it seems pretty low to me.  I expected closer to .02 at least.

With mining some of these super low volume coins on tiny exchanges I'm not sure how the payout actually works.  The estimates coming out of Multipoolminer seem like they are way off compared to what I'm actually seeing realized on the pool.  Nicehash miner is paying out pretty much the same with just my 5-1080 mining rig. 

I'm not ready to throw the towel in yet considering I'm still tweaking, but something definitely feels off from where I expect it to be.  Might just go back to mining up DGB for a while, but was hoping to get some pure BTC instead of having to dump on the DGB market.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: scryed on June 14, 2017, 03:58:53 PM
Seems Blake2s is having issues again with reported hashrates.

Miner displays correct speeds and share submitted but site shows 10% and is effectively reducing percentage of block rewards mined.

Anyone else running into the issue?

I'm also seeing this.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cryptoinvestor_x on June 14, 2017, 04:02:03 PM
Issue seems to be fixed now.

I like the pool and some days when everythings working it's definitely worthwhile. However I've noticed quite a few times a week this happens where I might have to split my rigs so that I get some consistent payouts vs risking it all on zpool.

If you need any help with testing or examples of when issues are happening let me know. Ideally I'd want to continue using the pool.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 14, 2017, 09:36:31 PM
restarting the server hosting the stratum servers. It was due for a reboot from previous patching.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 14, 2017, 09:41:29 PM
Seems Blake2s is having issues again with reported hashrates.

Miner displays correct speeds and share submitted but site shows 10% and is effectively reducing percentage of block rewards mined.

Anyone else running into the issue?

I've been only running on this pool for a couple of days and notice that my earnings are fairly significantly lower than I expected them to be.  I've had a few outages and non-optimal things running, but still only getting .0127BTC from 7-GTX1080's and 1 GTX1080Ti it seems pretty low to me.  I expected closer to .02 at least.

With mining some of these super low volume coins on tiny exchanges I'm not sure how the payout actually works.  The estimates coming out of Multipoolminer seem like they are way off compared to what I'm actually seeing realized on the pool.  Nicehash miner is paying out pretty much the same with just my 5-1080 mining rig.  

I'm not ready to throw the towel in yet considering I'm still tweaking, but something definitely feels off from where I expect it to be.  Might just go back to mining up DGB for a while, but was hoping to get some pure BTC instead of having to dump on the DGB market.

I feel ya, the other day i had 8 GTX1080ti's mining zpool and the total earnings to my wallet only increased $12ish for the entire day of mining on zpool.... most days it brings in nice numbers in earnings.. but it seems like 1 or 2 days a week my earnings drop like to 1/4 or 1/2 of the earnings with shares still being accepted on all rigs.. hope its fixed soon

Someone previously mentioned it could be the rigs themselves messing up.. so to correct this "possible" issue i have implemented daily restarts every 24hrs via windows task managing and set the batch file to run on startup so it resumes mining..


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 14, 2017, 10:26:33 PM
All of the numbers after each mining algorithm are your hashrates so that the pool can decide which coin is most profitable.
They are not setting the difficulty at all and you need to use d=X as you have in your last command.

So if my rig is getting a total of 1.2ksol/s for Equihash, my factor would be -p equihash=1200?

BTW, I noticed you have a -p -c=BTC,etc,etc,etc.  I think the dash before the c=BTC is your problem.

Found a post that equihash should be measured in kSol/sec.  So you would want to put 1.2 for equihash


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 14, 2017, 10:28:12 PM
Hmmm... now I regret not screen capping the graph of the hashrates.  I've heard people say that it's an issue with the graph code, but I can see a direct correspondence between what it shows and my earnings.  Every 1 hour or so I've had to restart my miners because the site shows that my hash rate halves as reported on the site and with it of course my earnings even though my local rate stays constant.  This is fixed after a restart, but then after a while it just drops again.  I stopped mining on Zpool for a few days because of this, but I started again tonight just to test it.  Hopefully this issue has been resolved.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: cashen on June 14, 2017, 10:41:32 PM
All of the numbers after each mining algorithm are your hashrates so that the pool can decide which coin is most profitable.
They are not setting the difficulty at all and you need to use d=X as you have in your last command.

So if my rig is getting a total of 1.2ksol/s for Equihash, my factor would be -p equihash=1200?

BTW, I noticed you have a -p -c=BTC,etc,etc,etc.  I think the dash before the c=BTC is your problem.

Found a post that equihash should be measured in kSol/sec.  So you would want to put 1.2 for equihash

Speaking of Equihash, is the actual correct on the main page? I've seen seen a coin even half of what the actual says it is.


Title: Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 12:03:39 AM
All of the numbers after each mining algorithm are your hashrates so that the pool can decide which coin is most profitable.
They are not setting the difficulty at all and you need to use d=X as you have in your last command.

So if my rig is getting a total of 1.2ksol/s for Equihash, my factor would be -p equihash=1200?

BTW, I noticed you have a -p -c=BTC,etc,etc,etc.  I think the dash before the c=BTC is your problem.

Found a post that equihash should be measured in kSol/sec.  So you would want to put 1.2 for equihash

Speaking of Equihash, is the actual correct on the main page? I've seen seen a coin even half of what the actual says it is.

It looks right to me at least right now.

SS of my 3 machines mining:
https://i.imgur.com/AWlgNIU.jpg

SS of my frontpage on zpool:
https://i.imgur.com/NLA3lHT.jpg

Obviously there is a bit of luck involved, but it actually seems to be showing slightly higher in some cases.  It does take a bit to ramp up on the main page because I believe it is a rolling average.  I notice it takes a minute or two to get up to what appears full speed on the main page, but I suspect that is just an artifact of the averaging.  We'll see how it goes.  I'm not sure that Zpool is really worth it to me when I can be mining something like 2200DGB/day and it will go back up in a matter of time.  I'll give it some more time and see how it goes.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 12:49:45 AM
Seriously what is going on with the earnings?  I've been mining full out and for what appears to be over an hour my graph is completely flat

https://i.imgur.com/7z0LGaO.png

I'm using zpools multialgo method and it seems like it switched me a few times during that period between Lyra2v2, hmq1725, Equihash, Blake2s, and Bitcore.  Yet there looks to be almost no earnings gained from any of it.  Is there something we don't understand about how earnings are calculated or something?

Is it possible to get some way to get a quantifiable average earnings for the last X period or something besides the totally non-descript balance graph?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 15, 2017, 01:54:04 AM
Seriously what is going on with the earnings?  I've been mining full out and for what appears to be over an hour my graph is completely flat

https://i.imgur.com/7z0LGaO.png

I'm using zpools multialgo method and it seems like it switched me a few times during that period between Lyra2v2, hmq1725, Equihash, Blake2s, and Bitcore.  Yet there looks to be almost no earnings gained from any of it.  Is there something we don't understand about how earnings are calculated or something?

Is it possible to get some way to get a quantifiable average earnings for the last X period or something besides the totally non-descript balance graph?

mine has been completely flat also, but my total earnings has been increasing.. i think the reporting side of the server is having issues...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 15, 2017, 08:42:12 AM
Seriously what is going on with the earnings?  I've been mining full out and for what appears to be over an hour my graph is completely flat

https://i.imgur.com/7z0LGaO.png

I'm using zpools multialgo method and it seems like it switched me a few times during that period between Lyra2v2, hmq1725, Equihash, Blake2s, and Bitcore.  Yet there looks to be almost no earnings gained from any of it.  Is there something we don't understand about how earnings are calculated or something?

Is it possible to get some way to get a quantifiable average earnings for the last X period or something besides the totally non-descript balance graph?

mine has been completely flat also, but my total earnings has been increasing.. i think the reporting side of the server is having issues...

Seriously noobies worrying about graphs to much...

balance and earnings are still increasing.. thats all that matters


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 15, 2017, 11:56:02 AM
ZCL wallet is in maintanance on bittrex for days, where you sell them crackfoo, I have strong feeling those bastards will delist it after they play enough fees with a closed volume market and we get some dust after that?

it's on ccex and cryptopia.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 15, 2017, 11:56:31 AM


Seriously noobies worrying about graphs to much...

balance and earnings are still increasing.. thats all that matters

I know right.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 01:31:05 PM


Seriously noobies worrying about graphs to much...

balance and earnings are still increasing.. thats all that matters

I know right.

The graph is the only means that we have to determine our earnings.  If the pool gave some clear indication of the earnings we would have more to go on.  A flat graph would indicate that it wasn't going up during that period.  Excuse me for wanting to know what the benefit of me mining on the pool is.  I mean if you don't want us to mine on the pool I'll be happy to go elsewhere.

Not to mention I sent you a PM on the forums asking a simple questions about what to use for Equihash 2 days ago and you haven't bothered to respond.  Seems like you don't really care if people want to mine on your pool or not. 


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 15, 2017, 01:47:22 PM


Seriously noobies worrying about graphs to much...

balance and earnings are still increasing.. thats all that matters

I know right.

The graph is the only means that we have to determine our earnings.  If the pool gave some clear indication of the earnings we would have more to go on.  A flat graph would indicate that it wasn't going up during that period.  Excuse me for wanting to know what the benefit of me mining on the pool is.  I mean if you don't want us to mine on the pool I'll be happy to go elsewhere.

Not to mention I sent you a PM on the forums asking a simple questions about what to use for Equihash 2 days ago and you haven't bothered to respond.  Seems like you don't really care if people want to mine on your pool or not.  

I don't hear you complaining about the spike up after a little "flat" spot... and all those numbers above the graphs... are your earnings. I'm not a developer and didn't code the pool or its graphing.

They're weren't simple questions, you're asking me for advice on what to mine and what software to use. I don't do multiaglo or GPU mining so I have no idea, you've better off just posting in the thread.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Mogsington on June 15, 2017, 01:59:52 PM
The graph is the only means that we have to determine our earnings.  If the pool gave some clear indication of the earnings we would have more to go on.  A flat graph would indicate that it wasn't going up during that period.  Excuse me for wanting to know what the benefit of me mining on the pool is.  I mean if you don't want us to mine on the pool I'll be happy to go elsewhere.

The graph is a terrible way to figure out your earnings. Yes it's nice to see an upwards slope, but really, just write down your "unpaid" value and note the time. Now wait a few hours / days (the longer the better). Now write down your new "unpaid" and divide it by the hours between the 2 readings.

It's relatively trivial to do this with a python script using the zpool API.

I have no idea why the graphs are messing up, but yes it is annoying. In the past it was because of coins devaluing at the exchange before they can be cashed out. ("unpaid" is an estimate, not a set number), I don't know if that's still the case or not, but it happens on all multi-coin pools sometimes.

Also there are problems that seem to coincide with payout processing. I've seen the stratum connection drop fairly regularly during those times, and it's visible as a drop on my hashrate graph until the pool starts running smoothly again. It doesn't happen often in a day, so the overall effect isn't much, but it's not ideal.

Unfortunately, before you "go elsewhere", there are few good alternatives to zpool. One of the major alternatives uses PROP as a payment system and is obviously being gamed by the pool operator for profit. Another major alternative has stupidly high fees (but well hidden in the small print).


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 15, 2017, 02:06:17 PM
The graph is the only means that we have to determine our earnings.  If the pool gave some clear indication of the earnings we would have more to go on.  A flat graph would indicate that it wasn't going up during that period.  Excuse me for wanting to know what the benefit of me mining on the pool is.  I mean if you don't want us to mine on the pool I'll be happy to go elsewhere.

Also there are problems that seem to coincide with payout processing. I've seen the stratum connection drop fairly regularly during those times, and it's visible as a drop on my hashrate graph until the pool starts running smoothly again. It doesn't happen often in a day, so the overall effect isn't much, but it's not ideal.


Yeah, a problem I'm not sure can be avoided given the amount of coins active. It's because the wallets are being mined against and during payouts which can tie up the RPC connection, the stratum server requests a new block template from the wallet in the middle of paying out and well, it shits the bed. It's scripted to come back immediately but yes, causes miners a disconnect. I guess moving to a 12h payout schedule has actually reduced that issue considerably.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 02:16:27 PM

I don't hear you complaining about the spike up after a little "flat" spot... and all those numbers above the graphs... are your earnings. I'm not a developer and didn't code the pool or its graphing.

They're weren't simple questions, you're asking me for advice on what to mine and what software to use. I don't do multiaglo or GPU mining so I have no idea, you've better off just posting in the thread.

I guess I expected too much in thinking that you understood how your pool operated.  Seems like something that the admin would likely want to know since you offer the feature and should likely want to improve the efficiency of your pool to maximize profits for all.  Guess the posts I've seen elsewhere about you not knowing how things work are more true than I hoped.  Which is kind of sad.


The graph is a terrible way to figure out your earnings. Yes it's nice to see an upwards slope, but really, just write down your "unpaid" value and note the time. Now wait a few hours / days (the longer the better). Now write down your new "unpaid" and divide it by the hours between the 2 readings.

It's relatively trivial to do this with a python script using the zpool API.

I have no idea why the graphs are messing up, but yes it is annoying. In the past it was because of coins devaluing at the exchange before they can be cashed out. ("unpaid" is an estimate, not a set number), I don't know if that's still the case or not, but it happens on all multi-coin pools sometimes.

Also there are problems that seem to coincide with payout processing. I've seen the stratum connection drop fairly regularly during those times, and it's visible as a drop on my hashrate graph until the pool starts running smoothly again. It doesn't happen often in a day, so the overall effect isn't much, but it's not ideal.

Unfortunately, before you "go elsewhere", there are few good alternatives to zpool. One of the major alternatives uses PROP as a payment system and is obviously being gamed by the pool operator for profit. Another major alternative has stupidly high fees (but well hidden in the small print).

You're right it should be pretty simple to code something in Python, but unfortunately I've lost most of my coding skills over the years to a medical condition and was hoping the pool admin might know the best way to mine on their pool.  If not then a simple I'm not sure the best way to mine would have been a perfectly valid response to my questions, but instead I got silence and a passive aggressive snide response.  I'm not the first person who has questioned these things so to not have any response for it seems like they don't much care.  As for alternatives there is plenty of pure mining pools that don't auto-exchange that I could mine on as well.  As I mentioned in a previous post I was hoping to get some pure BTC instead of depressing markets that I hope will continue to rise.  I'll work on trying to get a python script to monitor the earnings rate over time.

It very well could just be a graph problem, the slope of the payout seems to indicate there is a smoothing operation to it since it is not a straight vertical line for payout even though I'm pretty sure it is a one time operation and not an actual incremental payout over some time.  That in itself might explain why the appearance of lesser earnings immediately after a payout occurs.  If anything I'm trying to assist by asking the questions and bringing up potential problems.  That doesn't seem like a totally unreasonable thing to me.  Taking the attitude of be happy you're earning anything doesn't really encourage people to stick around though.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 15, 2017, 03:53:34 PM
If not then a simple I'm not sure the best way to mine would have been a perfectly valid response to my questions, but instead I got silence and a passive aggressive snide response.  I'm not the first person who has questioned these things so to not have any response for it seems like they don't much care.  As for alternatives there is plenty of pure mining pools that don't auto-exchange that I could mine on as well.  As I mentioned in a previous post I was hoping to get some pure BTC instead of depressing markets that I hope will continue to rise.  I'll work on trying to get a python script to monitor the earnings rate over time.
People get bored answering a question over and over and every new miner over the forums has to ask something that countless numbers of people already asked before him. It usually leas to answers that might seem offensive to you, but I don't believe they are meant to.

As for the graph - it's a nice thingy, but you should ignore it, and stick to the numbers. There are better looking pools, but we are mining here for the profit and despite all the accusations and so many people trying to imply something else, the pool has top profitability (or people wouldn't stick here, after all).

IMO if you have NVIDIA - you can mine equihash (probably a bit better in terms of power usage, at least on my setups), blake2s or lyra2v2, and ignore all the hopping. The reason I'd not hop around is because people do it, then the pool they left starts to report higher earnings, they hop back, and in some way it disrupts the constant flow, instead the hash power is swinging around and you lose time between miner activations. it's not "per hour", but if you want better overview, you can jump on the front page, click on any algo and see the last hour/24h earnings, yours would be between these, and if you hop instantly, it might be hearly the per hour number when there is profitable currency being mined. I look there from time to time, but I avoid jumping the moment something shows a good hour of lucky mining. Take skein for example, it might look bad at 0.0039 or so, but that's what the pool reports, in reality you might be mining at 0.0048 and you'd be happy doing so. Now if it sticks at 0.003n - you should probably switch over elsewhere.

Of course, everyone has an opinion, so take my advice with a grain of salt. But in any case - ignore the graph and look at your daily earnings AND the leftover in unpaid balance.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 04:08:57 PM
People get bored answering a question over and over and every new miner over the forums has to ask something that countless numbers of people already asked before him. It usually leas to answers that might seem offensive to you, but I don't believe they are meant to.

As for the graph - it's a nice thingy, but you should ignore it, and stick to the numbers. There are better looking pools, but we are mining here for the profit and despite all the accusations and so many people trying to imply something else, the pool has top profitability (or people wouldn't stick here, after all).

IMO if you have NVIDIA - you can mine equihash (probably a bit better in terms of power usage, at least on my setups), blake2s or lyra2v2, and ignore all the hopping. The reason I'd not hop around is because people do it, then the pool they left starts to report higher earnings, they hop back, and in some way it disrupts the constant flow, instead the hash power is swinging around and you lose time between miner activations. it's not "per hour", but if you want better overview, you can jump on the front page, click on any algo and see the last hour/24h earnings, yours would be between these, and if you hop instantly, it might be hearly the per hour number when there is profitable currency being mined. I look there from time to time, but I avoid jumping the moment something shows a good hour of lucky mining. Take skein for example, it might look bad at 0.0039 or so, but that's what the pool reports, in reality you might be mining at 0.0048 and you'd be happy doing so. Now if it sticks at 0.003n - you should probably switch over elsewhere.

Of course, everyone has an opinion, so take my advice with a grain of salt. But in any case - ignore the graph and look at your daily earnings AND the leftover in unpaid balance.

I completely understand the attrition of answering the same questions, but silence is rarely a good answer.  FAQ's that you can direct people too will often alleviate that need.  As I said my questions aren't just because I want things to be maximized for me, but also because people are insinuating a potential problem with the pool itself.  I've stuck around because I believe that the pool is likely profitable, but I'm not the type to just sit and let things roll when things look strange.  Things are moving far too quick in the cryptoworld to let some things go unnoticed.  I appreciate your insight and will maybe cut down the number of algos that I'm monitoring.  You're likely right that I'm losing more time in the switching than I realize.  I just wish there was better information readily available to do the comparisons.

I apologize if I seemed like I wanted you to just hand me answers.  Sometimes I feel like it is easier to ask someone in the know that might have the answer immediately available rather than digging through pages and pages of forums posts for an answer that may or may not be there.  The difference is I'm okay if someone tells me that they don't know and I don't judge them for it.  Seems like most people aren't willing to admit when they don't know something these days.  I work in IT support and I'm curious by nature so I'm always trying to find the answers to things I don't know or understand.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: zer0k on June 15, 2017, 05:38:20 PM
This forum along with common sense is the FAQ :D


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 06:01:26 PM
This forum along with common sense is the FAQ :D

What common sense did I miss exactly?  Common sense means that most would know the answer without any prior knowledge.  Nothing about crypto is common sense at this point.  Everything is an experiment and the results between two people's experience can vary greatly.  That's why there is more than one way to do things and why people ask questions. 


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 15, 2017, 06:45:06 PM
One thing I noticed is that the 3.4b version of EBWF seems to have a hardcoded 2% devfee built in.  I'm guessing that on multialgo that is going to get amplified due to multiple restarts of the miner over time.  It may normally only do X shares out of the miner over time, but restarting likely resets that counter back and causes you to give another 2%.  Depending on how often it is switching that could add up to a significant amount.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 16, 2017, 02:54:14 AM
LOL I still something is strange although this time it was in my favor according to the graph.

https://i.imgur.com/epbEe0w.png

Hell if I know what it means.  I'm guessing a price jump in coins that were mined before?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: sypher9 on June 16, 2017, 04:04:10 AM
I have the exact same graph! How do I mine more of THAT  ;D


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 16, 2017, 04:17:40 AM
I'm guessing its because Vertcoin saw a 25% jump on Poloniex.  Mine up that lyra2v2.


Title: Exchange
Post by: DaniRC on June 16, 2017, 04:24:49 AM
Is kraken not supported?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: xkreed on June 16, 2017, 08:02:03 AM
Hey men,

maybe we add some gas to lbry mining?
Seems this coin got a pump.

But on zpool there are only about 10 miners, and last block is found 6 days ago...

Regards,
krd.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: halker2010 on June 16, 2017, 12:56:05 PM
how can i mine zcash on zpool ? when i start with --server equihash.mine.zpool.ca
it mines hush


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 16, 2017, 12:59:14 PM
how can i mine zcash on zpool ? when i start with --server equihash.mine.zpool.ca
it mines hush

We need more hash for me to enable it to be mined. You can still get paid in ZEC though... If you've got more than 2-3Msol/s I'd be happy to flip it on for mining.


Title: Re: Exchange
Post by: crackfoo on June 16, 2017, 12:59:32 PM
Is kraken not supported?

ehhh? for what?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: halker2010 on June 16, 2017, 01:28:31 PM
how can i mine zcash on zpool ? when i start with --server equihash.mine.zpool.ca
it mines hush

We need more hash for me to enable it to be mined. You can still get paid in ZEC though... If you've got more than 2-3Msol/s I'd be happy to flip it on for mining.
:-[ :-[ i wanted to mine zec so badly tho but if i put my rigs and my friend it only gonna be around 10ks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 16, 2017, 02:04:21 PM
how can i mine zcash on zpool ? when i start with --server equihash.mine.zpool.ca
it mines hush

We need more hash for me to enable it to be mined. You can still get paid in ZEC though... If you've got more than 2-3Msol/s I'd be happy to flip it on for mining.
:-[ :-[ i wanted to mine zec so badly tho but if i put my rigs and my friend it only gonna be around 10ks

yeah I hear ya. pool speed is slowing increasing but even now with 180Ks, it 18h to get a ZEC block... not taking into account bad luck/good luck. Not quite feasible yet but I really hope more equihash miners come on board.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 16, 2017, 02:09:52 PM
how can i mine zcash on zpool ? when i start with --server equihash.mine.zpool.ca
it mines hush

We need more hash for me to enable it to be mined. You can still get paid in ZEC though... If you've got more than 2-3Msol/s I'd be happy to flip it on for mining.
:-[ :-[ i wanted to mine zec so badly tho but if i put my rigs and my friend it only gonna be around 10ks

yeah I hear ya. pool speed is slowing increasing but even now with 180Ks, it 18h to get a ZEC block... not taking into account bad luck/good luck. Not quite feasible yet but I really hope more equihash miners come on board.

also by mining equihash you're liable to get real lucky with some random huge KMD blocks. Yesterday we snagged one that was 599.8919373 and a few week ago we got one that was nearly 9k :)

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 16, 2017, 02:19:15 PM
I'll throw my 4.2k on it.  Every bit helps


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: whaitukay on June 16, 2017, 03:21:15 PM
Anyone here know if zminer can be used with Miner Control?

The console output just stops after this:

[17:37:19] Starting Zpool.ca Equihash with zminer.exe   --server equihash.mine.zpool.ca --port 2142 --fee 0 --eexit 3 --user 1PbSR7txxxxxxxxxxxxxxxxxxxxxxxxxx --pass c=BTC

It seems to be mining in the background though, but I would like to see the actual output of the miner if that is possible.



Title: Re: Exchange
Post by: DaniRC on June 16, 2017, 03:56:36 PM
Is kraken not supported?

ehhh? for what?
Solved!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: xqicka on June 16, 2017, 05:48:07 PM
20% fee for auto exchange?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 16, 2017, 07:38:55 PM
20% fee for auto exchange?

What's that?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: whaitukay on June 16, 2017, 09:29:16 PM
Anyone here know if zminer can be used with Miner Control?

The console output just stops after this:

[17:37:19] Starting Zpool.ca Equihash with zminer.exe   --server equihash.mine.zpool.ca --port 2142 --fee 0 --eexit 3 --user 1PbSR7txxxxxxxxxxxxxxxxxxxxxxxxxx --pass c=BTC

It seems to be mining in the background though, but I would like to see the actual output of the miner if that is possible.



Nvm, I figured it out.
Had to add "usewindow=true" in the config file.

Now I can start mining some equihash again!  ;D


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: dubardo on June 17, 2017, 10:48:27 AM
Any support for Zencash (https://zensystem.io/) in the near futur?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 17, 2017, 11:46:16 AM
20% fee for auto exchange?
Sure, and nobody noticed 20% lower earnings.  ::)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 17, 2017, 01:38:53 PM
Any support for Zencash (https://zensystem.io/) in the near futur?

I've turned ZEN back on since bittrex re-enabled the wallet. Please send more hash :)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 17, 2017, 03:26:50 PM
20% fee for auto exchange?
Sure, and nobody noticed 20% lower earnings.  ::)
And somebody noticed the lack of standing/data......

Please explain your blind accusation....  in detail.  I'd love to hear it.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 17, 2017, 03:38:30 PM
20% fee for auto exchange?
Sure, and nobody noticed 20% lower earnings.  ::)
And somebody noticed the lack of standing/data......

Please explain your blind accusation....  in detail.  I'd love to hear it.
Why quoting me? I'm not accusing anyone. I get better earnings from zpool, which either means everyone else (including myself when I mine in specific currency) steals 20%, or that there are no missing 20%... the topic comes up on every page, it gets old.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 17, 2017, 04:29:59 PM
20% fee for auto exchange?
Sure, and nobody noticed 20% lower earnings.  ::)
And somebody noticed the lack of standing/data......

Please explain your blind accusation....  in detail.  I'd love to hear it.
Why quoting me? I'm not accusing anyone. I get better earnings from zpool, which either means everyone else (including myself when I mine in specific currency) steals 20%, or that there are no missing 20%... the topic comes up on every page, it gets old.

It was a followup to your post.... was relevant to quote it....  I'm on your side.....


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 17, 2017, 05:29:24 PM
FlexFee™ now enabled on the decred algo:

0 - 500Gh = 2.25%
500GH - 1.5Th = 2%
1.5Th - 3Th = 1.75%
3Th+ = 1.5%
               
Cheers!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 17, 2017, 05:50:37 PM
FlexFee™ now enabled on the decred algo:

0 - 500Gh = 2.25%
500GH - 1.5Th = 2%
1.5Th - 3Th = 1.75%
3Th+ = 1.5%
               
Cheers!

You can now find the algos and thresholds in the 2nd post:

https://bitcointalk.org/index.php?topic=1751272.msg17495330#msg17495330

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 17, 2017, 06:47:34 PM
Just FYI, I'm in the process of migrating coins to a new server. I'm hoping this could reduce the stratum resets during payouts by having a fast more responsive coin daemons. The new server is a Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz, 40 cores & 256GB ram and it will be replacing one of the Intel(R) Xeon(R) CPU E5-2670 @ 2.60GHz, 16 cores with 128GB ram. It'll be a slow process over the next couple weeks.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 17, 2017, 06:56:54 PM
BTW, how come we mine more HUSH after it became low profit, while Zen hashrate dropped. And is there a way to point to a specific coin in a pool? I got in equihash after you announced Zen retun, but we seem to be mining mostly Komodo.
EDIT - or Zcl and Hush as of now. Zen is at 0 h/s.

It was a followup to your post.... was relevant to quote it....  I'm on your side.....
Oh, sorry, may be I overreacted, as I said, the topic gets old.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 17, 2017, 08:34:35 PM
BTW, how come we mine more HUSH after it became low profit, while Zen hashrate dropped. And is there a way to point to a specific coin in a pool? I got in equihash after you announced Zen retun, but we seem to be mining mostly Komodo.
EDIT - or Zcl and Hush as of now. Zen is at 0 h/s.

I noticed this with some algos.  Blake2s for example hasn't mined Verge in over an hour now.
http://i.imgur.com/3MpWozH.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 17, 2017, 09:29:13 PM
BTW, how come we mine more HUSH after it became low profit, while Zen hashrate dropped. And is there a way to point to a specific coin in a pool? I got in equihash after you announced Zen retun, but we seem to be mining mostly Komodo.
EDIT - or Zcl and Hush as of now. Zen is at 0 h/s.

I noticed this with some algos.  Blake2s for example hasn't mined Verge in over an hour now.
http://i.imgur.com/3MpWozH.png

This is a bug, there are plenty of mined here: http://zpool.ca/site/mining

But Zen doesn't get much hashrate and we can't mine it (and we are obviously unlucky I guess). The whole equihash behaves weirdly or the website shows random stuff. Zcl now on top and not mined, Komodo being mined even when on the bottom (same with Hush). Zen at the bottom now and got some love...


Seriously there is something wrong:
1. My hashrate graph shows this for equihash:
http://imgur.com/g0RWvJN

2. Then I noticed the rejects, can't be true!?
http://imgur.com/SP9I8eG

3. But looking at the earnings, there is some Komodo (the rest was from another miner on skein), and the percentage is also weird, considering the last hours we were way inder 100 Ks and I have 7+ Ks/s (second image)
http://imgur.com/qHwzsHH
http://imgur.com/XnM2ea6


Now if I move I lose my shares over time and that's a big chunk of the day of mining equihash, and if I don't, I seem to get almost nothing.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 17, 2017, 09:34:08 PM
This is a bug, there are plenty of mined here: http://zpool.ca/site/mining

It's more than a UI bug because I didn't receive any Verge shares for over an hour too.  The only reason I noticed because my earnings suddenly started to flatten out.



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 17, 2017, 09:39:18 PM
This is a bug, there are plenty of mined here: http://zpool.ca/site/mining

It's more than a UI bug because I didn't receive any Verge shares for over an hour too.  The only reason I noticed because my earnings suddenly started to flatten out.


Similar then. I don't look much at the graph, but there are no earnings worth mentionng considering the time and the hashrate.



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 17, 2017, 09:43:24 PM
Similar then. I don't look much at the graph, but there are no earnings worth mentionng considering the time and the hashrate.
I monitor earnings via the API every five minutes and graph the results locally.  It's noticeable when the slope changes.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 18, 2017, 12:11:31 AM
Similar then. I don't look much at the graph, but there are no earnings worth mentionng considering the time and the hashrate.
I monitor earnings via the API every five minutes and graph the results locally.  It's noticeable when the slope changes.

Mind sharing your script that you use to do this?  I was planning on working something out in Python when I relearned it, but this seems like something that would be pretty nice to have.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 18, 2017, 02:12:10 AM
Mind sharing your script that you use to do this?  I was planning on working something out in Python when I relearned it, but this seems like something that would be pretty nice to have.

On Linux it's a simple call to curl every 5 minutes:
Code:
watch -n 300 ./recurl.sh

The contents of recurl.sh:
Code:
#!/bin/bash

{ date -Iminutes; curl -s http://zpool.ca/api/walletEx?address=MyWalletAddress; } >> outcurl.log


The parsing into a graph is more complex.  Maybe I'll write a .NET program to do it later today and I'll share that instead.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: kopija on June 18, 2017, 04:26:12 AM
How did such promising coin as ZEN  ended up so problematic on zpool? It seems to not work most of the time.
And (sorry for the OT) is it true that the ZENs lead developer quit or did something nasty? I hear lots of random gibberish these days on these forums.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 18, 2017, 04:33:38 AM
BTW, how come we mine more HUSH after it became low profit, while Zen hashrate dropped. And is there a way to point to a specific coin in a pool? I got in equihash after you announced Zen retun, but we seem to be mining mostly Komodo.
EDIT - or Zcl and Hush as of now. Zen is at 0 h/s.

I noticed this with some algos.  Blake2s for example hasn't mined Verge in over an hour now.
http://i.imgur.com/3MpWozH.png

This is a bug, there are plenty of mined here: http://zpool.ca/site/mining

But Zen doesn't get much hashrate and we can't mine it (and we are obviously unlucky I guess). The whole equihash behaves weirdly or the website shows random stuff. Zcl now on top and not mined, Komodo being mined even when on the bottom (same with Hush). Zen at the bottom now and got some love...


Seriously there is something wrong:
1. My hashrate graph shows this for equihash:
http://imgur.com/g0RWvJN

2. Then I noticed the rejects, can't be true!?
http://imgur.com/SP9I8eG

3. But looking at the earnings, there is some Komodo (the rest was from another miner on skein), and the percentage is also weird, considering the last hours we were way inder 100 Ks and I have 7+ Ks/s (second image)
http://imgur.com/qHwzsHH
http://imgur.com/XnM2ea6


Now if I move I lose my shares over time and that's a big chunk of the day of mining equihash, and if I don't, I seem to get almost nothing.
Moved to another algo before I went to bed, seems my reject rate was for real (nothing to indicate it in the miners). Spending a day of doing nothing wasn't fun.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 18, 2017, 05:21:27 AM
Mind sharing your script that you use to do this?  I was planning on working something out in Python when I relearned it, but this seems like something that would be pretty nice to have.

On Linux it's a simple call to curl every 5 minutes:
Code:
watch -n 300 ./recurl.sh

The contents of recurl.sh:
Code:
#!/bin/bash

{ date -Iminutes; curl -s http://zpool.ca/api/walletEx?address=MyWalletAddress; } >> outcurl.log


The parsing into a graph is more complex.  Maybe I'll write a .NET program to do it later today and I'll share that instead.

That would be cool.  I did essentially this in a batch file so I can get the same output if you have something that parses it into a graphing format.  I presume we need to parse the json or something before feeding it into a graphing library.

Code:
@echo off
:loop
SET MYDATE=%date:~-4,4%-%date:~-7,2%-%date:~-10,2%T%time:~0,5%
echo | set /p dummyName=%MYDATE% >> walletlog.txt
curl -s http://zpool.ca/api/walletEx?address=walletaddress>> walletlog.txt
echo. >> walletlog.txt
timeout /t 300 /nobreak
goto :loop


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: jwarren81 on June 18, 2017, 06:00:04 AM
I wrote this quick powershell script to pull the stats for a wallet and save them to a CSV:

Code:
$DataPath = '.\Stats.csv'
$Interval = 300
$WalletAddress = 'YOUR_WALLET_HERE'

$timeout = new-timespan -Minutes 1440
$sw = [diagnostics.stopwatch]::StartNew()

while ($sw.elapsed -lt $timeout) {
    $Wallet = Invoke-WebRequest "http://www.zpool.ca/api/walletEx?address=$WalletAddress" -UseBasicParsing | ConvertFrom-Json
    If($Wallet) {
        $WalletObject = [PSCustomObject]@{
                            date = Get-Date -Format 'MM-dd-yyyy'
                            time = Get-Date -Format 'HH:mm:ss'
                            currency = $Wallet.currency
                            unsold = $Wallet.unsold
                            balance = $Wallet.balance
                            unpaid = $Wallet.unpaid
                            paid = $Wallet.paid
                            total = $Wallet.total
                        }

        If(Test-Path $DataPath) {
            $WalletObject | Export-Csv -Path $DataPath -Append -NoTypeInformation -Encoding UTF8
        } Else {
            $WalletObject | Export-Csv -Path $DataPath -NoTypeInformation -Encoding UTF8
        }
    }

    Start-Sleep -Seconds $Interval

}

Save it to a .ps1 file and run it.  It will pull stats at the $Interval (seconds) and runs for 24 hours.  You can set task scheduler to kick it off each day.

It creates a Stats.csv file in whatever directory you run it from and you can use Excel or Power BI Desktop to create whatever visualizations you want.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: halker2010 on June 18, 2017, 06:43:41 AM
hey how much hashrate do you need to enable the zcash mining ? consider the minimum i found some good miners that might help.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 18, 2017, 12:46:58 PM
hey how much hashrate do you need to enable the zcash mining ? consider the minimum i found some good miners that might help.

I'd like to see a consistent 1Msol/s to make block finding reasonable


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 18, 2017, 12:47:56 PM
How did such promising coin as ZEN  ended up so problematic on zpool? It seems to not work most of the time.
And (sorry for the OT) is it true that the ZENs lead developer quit or did something nasty? I hear lots of random gibberish these days on these forums.

I've found some rejected blocks so need to check with tpruvot to see if there is something not right with the ZEN code.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: pginvest on June 18, 2017, 12:52:37 PM
Need some help on zpool

I have free electricity but cpu mostly
 - intel i7 3520M with amd radeon 7570M (work laptop)
 - amd e-350 (1,6 GHz) with amd radeon hd 6310 ( just for crypto 24/7)

In your opinion which is the best algo i can mine and with which miner?
Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 18, 2017, 03:09:12 PM
Need some help on zpool

I have free electricity but cpu mostly
 - intel i7 3520M with amd radeon 7570M (work laptop)
 - amd e-350 (1,6 GHz) with amd radeon hd 6310 ( just for crypto 24/7)

In your opinion which is the best algo i can mine and with which miner?
Thanks

Not sure what you'll get for hashrate, but m7m is likely the best for your CPU's.  I don't see either amd card listed in the benchmarks on zpool so you'd have to benchmark them with various miners to determine what you'll get.  I'd guess not a lot maybe a few dollars each per day max.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AvPro on June 18, 2017, 03:39:38 PM
Hi,

For Scrypt mining from NiceHash what is the recommended diff param? d=2048 gets me kicked off for too low diff

Thanks,


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 18, 2017, 03:45:10 PM
Hi,

For Scrypt mining from NiceHash what is the recommended diff param? d=2048 gets me kicked off for too low diff

Thanks,

I use 16768 and usually around 8Gh


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AvPro on June 18, 2017, 03:47:51 PM
What sort of negative delta do you usually get?

Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 18, 2017, 04:18:51 PM
due to the constant forking and loosing $, I've dropped HONEY. Please stop mining using c=HONEY.

Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 18, 2017, 04:19:21 PM
What sort of negative delta do you usually get?

Thanks

I've never really checked. I'll let you know after I put in some more orders.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AvPro on June 18, 2017, 04:32:29 PM
What sort of negative delta do you usually get?

Thanks

I've never really checked. I'll let you know after I put in some more orders.

Thanks, because for me it was about -15% between what paying for and what recognized at the pool -  which too much delta :(


Title: Re: █▓▒░-< [ZPOOL.CA][Multipool] The miners multipool >-░▒▓█ Paid 1150+ BTC in 2016
Post by: waxmiguel on June 19, 2017, 02:11:41 PM
█▓▒░-< [ FlexFee™ >-░▒▓█

FlexFee™ is an exclusive fee system on www.zpool.ca only. This fee system is enabled on select algos which reduces the fee's on the pool based on the hashrate. The more hashrate, the less fees. Currently we have the following algos and thresholds:

DECRED
0 - 500Gh = 2.25%
500GH - 1.5Th = 2%
1.5Th - 3Th = 1.75%
3Th+ = 1.5%

SCRYPT
0-5Gh = 2.25%
5Gh-10Gh = 2%
10Gh+ = 1.75%

SHA256
0-500Gh = 2.25%
500Gh-1Ph = 2%
1Ph-5Ph = 1.75%
5Ph+ = 1.5%

LYRA2v2
0-5Gh = 2.25%
5Gh-10Gh = 2%
10Gh-25Gh = 1.75
25Gh+ = 1.5%

X11
0-20Gh = 2.25%
20Gh-50Gh = 2%
50Gh-100Gh = 1.75
100Gh+ = 1.5%


█▓▒░-< [ Hashtap™ >-░▒▓█



█▓▒░-< [ Custom multi algo miners >-░▒▓█

JaredKaragen -

https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405

minerx117 - NEMOSMINER multi algo profit switching NVIDIA miner for ZPOOL

https://bitcointalk.org/index.php?topic=1777336.msg17729122


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: sypher9 on June 19, 2017, 05:13:35 PM
Seeing a lot of rejects as well for equihash. Restarted my miner and now it seems to be ok...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: votk on June 19, 2017, 07:23:37 PM
Doesn't help that the Equihash chart is wrong.
It should be showing the hashrate in hash or sols, not Mh  ;)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 19, 2017, 07:25:57 PM
Doesn't help that the Equihash chart is wrong.
It should be showing the hashrate in hash or sols, not Mh  ;)

it's just the label for that graph that's wrong....


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 02:51:13 AM
Wonder if it might be possible to add an API that would allow us to query the actual blocks that we were part of mining?

Or even just the same last 50 blocks display that is showing on the wallet page?

Maybe I should make the request on a YIIMP or YAAMP thread?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 20, 2017, 03:53:20 AM
I had my miner mine Groestl for a short period 3 times today with like 98% rejects... all 3 times it switched to that algo..


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 03:58:02 AM
Which miner are you using for Groestl?  Mine switched twice today and didn't show any rejected shares?

I used Klaus' ccminer for Groestl.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 20, 2017, 04:08:46 AM
Which miner are you using for Groestl?  Mine switched twice today and didn't show any rejected shares?

I used Klaus' ccminer for Groestl.

ccmineralexis78


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Lercker on June 20, 2017, 04:15:24 AM
Which miner are you using for Groestl?  Mine switched twice today and didn't show any rejected shares?

I used Klaus' ccminer for Groestl.

ccmineralexis78
Alexis78 does not support Groestl for some reason, only Myr-Grs.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 20, 2017, 04:19:58 AM
Which miner are you using for Groestl?  Mine switched twice today and didn't show any rejected shares?

I used Klaus' ccminer for Groestl.

ccmineralexis78
Alexis78 does not support Groestl for some reason, only Myr-Grs.

Sorry i miss-spoke, i just double checked, i looked to quick previously.. i was using ccminer-x64 2.0 for Groestl, i have mined that algo previously without issues... so not sure what the issue was today, it was rejected on all my rigs, not just 1


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Lercker on June 20, 2017, 04:29:03 AM

Sorry i miss-spoke, i just double checked, i looked to quick previously.. i was using ccminer-x64 2.0 for Groestl, i have mined that algo previously without issues... so not sure what the issue was today, it was rejected on all my rigs, not just 1
ccminer v2.0 should work fine. It sounds like the problem some other miners had with equihash.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 04:57:57 AM
I'm seeing some rejected shares from equihash, hopefully migration to the new server will resolve those issues.


Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Fromage on June 20, 2017, 05:13:53 AM
Yeah fixed Nemominer 2.whatever... added ccminer-alexis and Zec miner 0.3.3b

added my own btc addresses (whatever)

equihash,bitcore,x17,Lyra2RE2,blake2s,veltor,neoscrypt

This was one of the first builds that I could get Equihash to work.... the password was messing everything up!

Had to remove Decred... for some reason it will not be accepted (whatever)

miner bug fixes... but working stable...

If you want it you can have it... you can easily remove my btc addresses using powershell

aaronsace... I tried to download your program and my antivirus kicks in (finds a threat)...

This one has no threats....

https://mega.nz/#!4mpAXbqR!3gs7Et90tyeepNTqClsIuG9vD5klQfhbBsmWgiNwK5k (https://mega.nz/#!4mpAXbqR!3gs7Et90tyeepNTqClsIuG9vD5klQfhbBsmWgiNwK5k)

I won't be updating... leaving all the rest to you all

Chow

p.s For goodness sakes please change the btc address TO YOURS in start.bat


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: kopija on June 20, 2017, 07:17:37 AM

aaronsace... I tried to download your program and my antivirus kicks in (finds a threat)...

This one has no threats....

https://mega.nz/#!4mpAXbqR!3gs7Et90tyeepNTqClsIuG9vD5klQfhbBsmWgiNwK5k (https://mega.nz/#!4mpAXbqR!3gs7Et90tyeepNTqClsIuG9vD5klQfhbBsmWgiNwK5k)

I won't be updating... leaving all the rest to you all

Chow

p.s For goodness sakes please change the btc address TO YOURS in start.bat


No wonder antivirus kicks-in. Every gamecrack on the TPB  these days comes with miners. Antivirus is just trying to protect you :)



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 20, 2017, 11:16:19 AM
I think this was discussed a little bit, at least the second image. I think the reject hash rate is graphing on a different scale?

ALso, why is the daily profit 30%-40% of whatever the coin profitability is? I've never seen any coin ever as low as what the daily profit is.


http://i.imgur.com/z4l59nk.png


http://i.imgur.com/VP7PjOE.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 20, 2017, 11:59:01 AM
Web page error?

Parse error: syntax error, unexpected '<<' (T_SL) in /home/zpool/next/web/yaamp/core/backend/rawcoins.php on line 311


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 20, 2017, 12:01:27 PM
I think this was discussed a little bit, at least the second image. I think the reject hash rate is graphing on a different scale?

ALso, why is the daily profit 30%-40% of whatever the coin profitability is? I've never seen any coin ever as low as what the daily profit is.


http://i.imgur.com/z4l59nk.png


http://i.imgur.com/VP7PjOE.png

AFAIK there were no mined ZEN under equihash, that's wasted hashrate on it.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: sreg0r on June 20, 2017, 12:04:12 PM
Web page error?

Parse error: syntax error, unexpected '<<' (T_SL) in /home/zpool/next/web/yaamp/core/backend/rawcoins.php on line 311

aaand it's back. doesn't look like it affected mining in anyway.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 20, 2017, 12:32:41 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 20, 2017, 01:13:35 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: elbandi on June 20, 2017, 01:48:56 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.
because dmd use double sha256 for merkle root, and groestlcoin use single sha256 for merkleroot:

https://github.com/nicehash/sgminer/blob/master/algorithm.c#L1217-L1218

but i think there is support for dmd in yiimp.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 20, 2017, 01:55:15 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.
because dmd use double sha256 for merkle root, and groestlcoin use single sha256 for merkleroot:

https://github.com/nicehash/sgminer/blob/master/algorithm.c#L1217-L1218

but i think there is support for dmd in yiimp.

even using the dmd-gr it rejects...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 02:26:59 PM
I think this was discussed a little bit, at least the second image. I think the reject hash rate is graphing on a different scale?


Yeah it seems to be.  A single rejected share seems like it can cause a very large spike on the graph.  I've looked at my miner logs and I occasionally get a rejected share near the start of hashing, but my graphs look similar.

https://i.imgur.com/o44iwfX.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: galixxx on June 20, 2017, 03:33:32 PM
mining with qubit algo and having user: <ESP2 address> and pwd c=ESP2 is not working anymore.
I changed to X11 before and something happened where roughly 40k of ESP2 dissapeared from the balance section.
@crackfoo could you please check what happened?
I'm happy to put my miner back to the pool once this is clarified.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 03:38:28 PM
Curious why we would be mining up Cakeslices and Join under Nist5 if they are paying out 0.

https://i.imgur.com/3UypDkc.png

https://i.imgur.com/hZMXirt.png



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 04:28:46 PM
Wow I'm an idiot and just realized why I was taking a hit on my earnings.   I just transferred BTC from my normal wallet to Poloniex and realized it was a $10 fee.  That's like 10-20% of my daily earnings right there.

I'm going to try switching to paying out in a different coin and see how things go.

Otherwise could we maybe get a higher payout threshold so we wouldn't get paid out quite as frequently and save on transfer fees?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: galixxx on June 20, 2017, 05:03:52 PM
mining with qubit algo and having user: <ESP2 address> and pwd c=ESP2 is not working anymore.
I changed to X11 before and something happened where roughly 40k of ESP2 dissapeared from the balance section.
@crackfoo could you please check what happened?
I'm happy to put my miner back to the pool once this is clarified.
tried other coins with options C=symbol... it's not working anymore on my side. pitty. looks like KURT for example is working. ESP2 is defunct...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Lercker on June 20, 2017, 05:27:31 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.
because dmd use double sha256 for merkle root, and groestlcoin use single sha256 for merkleroot:

https://github.com/nicehash/sgminer/blob/master/algorithm.c#L1217-L1218

but i think there is support for dmd in yiimp.

even using the dmd-gr it rejects...
The latest Dmd wallet forked to regular groestl, so it could be merge mines...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 20, 2017, 05:46:01 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.
because dmd use double sha256 for merkle root, and groestlcoin use single sha256 for merkleroot:

https://github.com/nicehash/sgminer/blob/master/algorithm.c#L1217-L1218

but i think there is support for dmd in yiimp.

even using the dmd-gr it rejects...
The latest Dmd wallet forked to regular groestl, so it could be merge mines...

oh.. I thought they abandoned that idea...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Lercker on June 20, 2017, 05:48:58 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.
because dmd use double sha256 for merkle root, and groestlcoin use single sha256 for merkleroot:

https://github.com/nicehash/sgminer/blob/master/algorithm.c#L1217-L1218

but i think there is support for dmd in yiimp.

even using the dmd-gr it rejects...
The latest Dmd wallet forked to regular groestl, so it could be merge mines...

oh.. I thought they abandoned that idea...
I think there was just issue with it, I don't think they ever got merge mining to work...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: galixxx on June 20, 2017, 06:19:56 PM
mining with qubit algo and having user: <ESP2 address> and pwd c=ESP2 is not working anymore.
I changed to X11 before and something happened where roughly 40k of ESP2 dissapeared from the balance section.
@crackfoo could you please check what happened?
I'm happy to put my miner back to the pool once this is clarified.
tried other coins with options C=symbol... it's not working anymore on my side. pitty. looks like KURT for example is working. ESP2 is defunct...
now the balance for ESP2 is back again. thx for fixing the issue. whatever it was...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 20, 2017, 06:22:36 PM
mining with qubit algo and having user: <ESP2 address> and pwd c=ESP2 is not working anymore.
I changed to X11 before and something happened where roughly 40k of ESP2 dissapeared from the balance section.
@crackfoo could you please check what happened?
I'm happy to put my miner back to the pool once this is clarified.
tried other coins with options C=symbol... it's not working anymore on my side. pitty. looks like KURT for example is working. ESP2 is defunct...
now the balance for ESP2 is back again. thx for fixing the issue. whatever it was...

nova was disabled... thus every coin that is on there is worth nothing. It should still be disabled since they're not replying to email support, I'll give them another 24h and well... after that hmq1725 may disappear since all the coins on there are only on nova.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 06:31:08 PM
mining with qubit algo and having user: <ESP2 address> and pwd c=ESP2 is not working anymore.
I changed to X11 before and something happened where roughly 40k of ESP2 dissapeared from the balance section.
@crackfoo could you please check what happened?
I'm happy to put my miner back to the pool once this is clarified.
tried other coins with options C=symbol... it's not working anymore on my side. pitty. looks like KURT for example is working. ESP2 is defunct...
now the balance for ESP2 is back again. thx for fixing the issue. whatever it was...

nova was disabled... thus every coin that is on there is worth nothing. It should still be disabled since they're not replying to email support, I'll give them another 24h and well... after that hmq1725 may disappear since all the coins on there are only on nova.

Is that also why Cakeslices and Join are worth 0?

*edit*  Actually I just noticed they are showing they are worth something now.  As you can see in my screenshot above they were giving 0


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 20, 2017, 06:56:41 PM
crackfoo, would you consider adding DMD - https://whattomine.com/coins/43-dmd-groestl

I've tried adding this before but seems to just reject the blocks.
because dmd use double sha256 for merkle root, and groestlcoin use single sha256 for merkleroot:

https://github.com/nicehash/sgminer/blob/master/algorithm.c#L1217-L1218

but i think there is support for dmd in yiimp.

even using the dmd-gr it rejects...

I agree with this.

I mined DMD-GR last year for quite some time.... never got any blocks, no credits....   If it were to ever get enabled, I would have a hefty share of the first block generated I would think, just because of that..


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 20, 2017, 07:12:26 PM
Please disable ZEN if it cannot be fixed, only wasting hashpower again.
   Zen (equihash)   11.4375 ZEN   69.019 k   121 575 (0%)   18 mins   93.1 kS/s

   Zen (equihash)   0.00000000 ZEN   40.498   76 923   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   39.684   76 922   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   38.92   76 921   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   38.228   76 920   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   37.498   76 919   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   36.852   76 918   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   36.358   76 917   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   34.73   76 915   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   35.395   76 916   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   33.814   76 914   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   33.482   76 913   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   32.975   76 912   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   32.533   76 911   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   31.99   76 910   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   31.332   76 909   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   30.896   76 908   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   30.268   76 907   16m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   28.378   76 906   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   28.204   76 905   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   28.012   76 904   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   28.111   76 903   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   27.045   76 902   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   27.327   76 901   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   28.6   76 900   17m ago   Orphan
   Zen (equihash)   0.00000000 ZEN   28.801   76 899   17m ago   Orphan
>>>> Zclassic (equihash)   12.50000000 ZCL   35.311 k   128 500   33m ago   Immature (6/101)



Who needs it now anyway, HUSH is hot.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 20, 2017, 07:48:04 PM
Seems fixed now=


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 20, 2017, 07:53:31 PM
Seems fixed now=

Yes ZEN is now working. Those were just blocks which were from the test net which orphaned when mainnet was loaded. One block found since re enabled


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 20, 2017, 08:30:50 PM
Any particular reason that Verge coin seems to have several orphaned blocks?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 20, 2017, 09:19:22 PM
Any particular reason that Verge coin seems to have several orphaned blocks?

nothing comes to mind.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: galixxx on June 20, 2017, 09:48:55 PM
mining with qubit algo and having user: <ESP2 address> and pwd c=ESP2 is not working anymore.
I changed to X11 before and something happened where roughly 40k of ESP2 dissapeared from the balance section.
@crackfoo could you please check what happened?
I'm happy to put my miner back to the pool once this is clarified.
tried other coins with options C=symbol... it's not working anymore on my side. pitty. looks like KURT for example is working. ESP2 is defunct...
now the balance for ESP2 is back again. thx for fixing the issue. whatever it was...

nova was disabled... thus every coin that is on there is worth nothing. It should still be disabled since they're not replying to email support, I'll give them another 24h and well... after that hmq1725 may disappear since all the coins on there are only on nova.
Thanks for your quick reply! Much appreciated. https://www.coinexchange.io would be an exchange for ESP as well...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 03:06:03 AM
Hi Z,
Does Feather coin works? What is the Password? Is it c=Feather or what. I am getting wrong info like this: Pool 0 is sending mismatched block contents to us (0 is
not 2-3)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 21, 2017, 03:26:59 AM
Hi Z,
Does Feather coin works? What is the Password? Is it c=Feather or what. I am getting wrong info like this: Pool 0 is sending mismatched block contents to us (0 is
not 2-3)


If you want to get paid in Feathercoin I'd presume it is c=FTC.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 04:24:24 AM
 I did use that but it is showing something else:
nsgminer -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 9


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 21, 2017, 08:36:25 AM
Was Verge removed?
http://imgur.com/hLD8cq5

Wait something's not right on the site...  Equihash is gone, blake2s only has 20 miners... and it's mining 0 Netko?

http://imgur.com/VuREGbF.png

What's going on?

EDIT:  Everything back to normal now? 


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 21, 2017, 12:43:09 PM
Was Verge removed?
http://imgur.com/hLD8cq5

Wait something's not right on the site...  Equihash is gone, blake2s only has 20 miners... and it's mining 0 Netko?

http://imgur.com/VuREGbF.png

What's going on?

EDIT:  Everything back to normal now? 

I got an email this morning from my hoster and they said they have scheduled maintenance Jun 22 4AM EST because they're having some problems with a  router so perhaps there was some connectivity issues then?? I'm not sure I was sleeping and it's resolved itself so it seems.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 21, 2017, 12:44:23 PM
I did use that but it is showing something else:
nsgminer -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 9

If there is already a balance on your address it can't be changed.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 01:13:07 PM
I did use that but it is showing something else:
nsgminer -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 9

If there is already a balance on your address it can't be changed.
Thats fine. But it is showing with that scripts as "VirtaUnique" coin. I do not get any Feathercoin as stated. Can you guys please fix that? I can use another wallet address but you haven't told me if the script is right yet c=FTC or feather or ftc. Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 21, 2017, 01:16:48 PM
I did use that but it is showing something else:
nsgminer -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 9

If there is already a balance on your address it can't be changed.
Thats fine. But it is showing with that scripts as "VirtaUnique" coin. I do not get any Feathercoin as stated. Can you guys please fix that? I can use another wallet address but you haven't told me if the script is right yet c=FTC or feather or ftc. Thanks

c=FTC is the proper syntax.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 01:25:15 PM
I did use that but it is showing something else:
nsgminer -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 9

If there is already a balance on your address it can't be changed.
Thats fine. But it is showing with that scripts as "VirtaUnique" coin. I do not get any Feathercoin as stated. Can you guys please fix that? I can use another wallet address but you haven't told me if the script is right yet c=FTC or feather or ftc. Thanks

c=FTC is the proper syntax.

Okay. I did a slight change to nsgminer.exe --neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 11. Will this work now?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 01:28:52 PM
I am getting this now..

09:27:20] Accepted C093562068070000x0 Diff 2.160/1.500 OCL 0
[09:27:21] The network difficulty has been set to 96173
[09:27:21] Stratum from pool 0 requested work restart
[09:27:21] Pool 0 is sending mismatched block contents to us (0 is
not 1-1)
[09:27:25] Accepted D77064142F050000x0 Diff 3.086/1.500 OCL 0
[09:27:27] Accepted 2E3E5DE7E0030000x0 Diff 4.125/1.500 OCL 0
[09:27:35] Accepted 9CDDCE9C51030000x0 Diff 4.821/1.500 OCL 0


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 21, 2017, 01:29:38 PM
I did use that but it is showing something else:
nsgminer -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 9

If there is already a balance on your address it can't be changed.
Thats fine. But it is showing with that scripts as "VirtaUnique" coin. I do not get any Feathercoin as stated. Can you guys please fix that? I can use another wallet address but you haven't told me if the script is right yet c=FTC or feather or ftc. Thanks

c=FTC is the proper syntax.

Okay. I did a slight change to nsgminer.exe --neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u wallet -p c=FTC -I 11. Will this work now?

shoulb ok now if you are the wallet 6xyVs*


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 01:32:05 PM
Yup. Thats the wallet!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ruptan on June 21, 2017, 01:37:39 PM
Yup. Thats the wallet!
Nevermind. Now I see the Feathercoin. Thank you so much. But I do still get that mismatch error.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 21, 2017, 01:42:52 PM
Yup. Thats the wallet!
Nevermind. Now I see the Feathercoin. Thank you so much. But I do still get that mismatch error.

not sure... I don't see any other miners using that nsgminer

http://www.zpool.ca/bench?algo=neoscrypt&chip=0

http://www.zpool.ca/site/miners



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 21, 2017, 04:37:22 PM
Does the unpaid balance ever get caught up?
Im up to 0.137BTC on unpaid over the week, but my balance to be paid out today is only up to 0.0211 so far today...seems like my unpaid balance is growing daily, while my balance to be paid is staying steady around $10/gpu.... little concerned


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 21, 2017, 04:55:08 PM
wow 1.2 MS/s on equihash lol


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 21, 2017, 05:46:03 PM
Does the unpaid balance ever get caught up?
Im up to 0.137BTC on unpaid over the week, but my balance to be paid out today is only up to 0.0211 so far today...seems like my unpaid balance is growing daily, while my balance to be paid is staying steady around $10/gpu.... little concerned

that is a total unpaid balance for the last 3 days. cause netko takes over 2.5 days to confirm now.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 21, 2017, 06:39:51 PM
Does the unpaid balance ever get caught up?
Im up to 0.137BTC on unpaid over the week, but my balance to be paid out today is only up to 0.0211 so far today...seems like my unpaid balance is growing daily, while my balance to be paid is staying steady around $10/gpu.... little concerned

that is a total unpaid balance for the last 3 days. cause netko takes over 2.5 days to confirm now.

yeah, you need to know if your mining long-confirm coins... also;  maybe people aren't buying what was mostly mined ATM?

Pay attention to the graph.  You'll see the lower green full graph emulate what the top thin (blue?) line was when the coins were minted;  with the difference in the green graph at the time block is found...  ITs a lot easier to judge on coins less than 12Hours maturity to sale....


Crackfoo:

Can you add the ability to see your payout graph in multiple scales with a dropdown box?

I.E.   12Hr, 24Hr, 48Hr, 7 Days, 30 days.

Would be nice to see the sawtooth patterns and profitability across more time span.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 22, 2017, 12:22:34 AM
You can now see the FlexFee™ thresholds on the pools hashrate graphs. For algo that are FlexFee™ enabled, there will be extra horizontal lines indicating the next drop in fees. Just hover on the line.
https://i.snag.gy/ThsCPf.jpg




Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 22, 2017, 04:47:54 PM
I have 22-25% rejects on miner with equihash, using claymore on amd, it started when ZEN was added to the pool, anyone experiencing same problems?
I also get a lot of rejects (actually the graph just fills) with Alexis miner and moved to other algos. Tried the setup on nicehash and didn't get a single reject.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 22, 2017, 06:44:43 PM
I have 22-25% rejects on miner with equihash, using claymore on amd, it started when ZEN was added to the pool, anyone experiencing same problems?
I also get a lot of rejects (actually the graph just fills) with Alexis miner and moved to other algos. Tried the setup on nicehash and didn't get a single reject.

yeah I use nicehash as well and no rejects. Not sure if this is something that can be fixed poolside...

https://pasteboard.co/jZAzzqwS.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 22, 2017, 06:48:07 PM
Crackfoo:

Can you add the ability to see your payout graph in multiple scales with a dropdown box?

I.E.   12Hr, 24Hr, 48Hr, 7 Days, 30 days.

Would be nice to see the sawtooth patterns and profitability across more time span.

I'll see if it can be done. I'm really bad at trying to figure out jqplot


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 22, 2017, 07:43:57 PM
i am still getting a lot of random periods of rejects on groestl algo....like day 3 of it happening randomly, its the same on multiple rigs


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: dragonmike on June 22, 2017, 10:22:35 PM
Just for my understanding... Are we saying it's a bad idea to set autoexchange currency to BTC because it costs more in transfer fees?

If I did set my payout currency to, say, DGB, would that not imply more transaction fees as the pool would have to square the balances against a large currency first before exchanging them to DGB?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 23, 2017, 12:52:28 AM
Just for my understanding... Are we saying it's a bad idea to set autoexchange currency to BTC because it costs more in transfer fees?

If I did set my payout currency to, say, DGB, would that not imply more transaction fees as the pool would have to square the balances against a large currency first before exchanging them to DGB?

No I was mistaken.  The pool pays the transfer fees on payout.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 23, 2017, 03:39:47 AM
Looks like Electra updated their wallet to try and resolve their blockchain issue.  Any plans to try and recover something from it?



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 23, 2017, 10:04:51 AM
I have 22-25% rejects on miner with equihash, using claymore on amd, it started when ZEN was added to the pool, anyone experiencing same problems?
I also get a lot of rejects (actually the graph just fills) with Alexis miner and moved to other algos. Tried the setup on nicehash and didn't get a single reject.

yeah I use nicehash as well and no rejects. Not sure if this is something that can be fixed poolside...

https://pasteboard.co/jZAzzqwS.png

Well, I'm talking like95% rejects on some of the workers. As it happened when you were adding Zen and it appeared to be fixed, I left some of the workers on equihash, but then it climbed again. I'll try again and give you screenshot so you can see the time too.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 23, 2017, 10:28:54 AM
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..

Regards
Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: TomYaMee on June 23, 2017, 11:33:57 AM
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..

Regards
Nemo

Omg, I thought it was just me having issue. Been trying to tinker around my setting to try to make it work.  :o


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 23, 2017, 12:26:30 PM
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..

Regards
Nemo

I see the same thing.  Miner says 15.4 MH/s (2x GTX 1080 Ti) but pool says 112 kh/s.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 23, 2017, 01:01:09 PM
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..

Regards
Nemo

i had the same issue.  investigating it i found that my miners were stuck in a low dif stratum roll and couldnt put in anything but a whole bunch of tiny
stratum shares like blake2s was doing.  i have been watching it and 129 miners and only 79 mhs means to me like its doing it to a lot of miners.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 23, 2017, 02:32:53 PM
I'm away travelling until Sunday. Will try and give the hmq stratum a bump and see it that improves.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 23, 2017, 02:53:12 PM
Can you include some kind of tutorial on how to set the profitability factors on your website?  Most people won't find the info in this thread since it's so huge now.

https://bitcointalk.org/index.php?topic=1751272.msg19010061#msg19010061

Would go great in your "Links" section, which already include useful stuff like API, Difficulty, Benchmarks, and Algo Switching.  A section on "how to set profitability factors" would be nice.

Thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 23, 2017, 03:07:49 PM
Can you include some kind of tutorial on how to set the profitability factors on your website?  Most people won't find the info in this thread since it's so huge now.

https://bitcointalk.org/index.php?topic=1751272.msg19010061#msg19010061

Would go great in your "Links" section, which already include useful stuff like API, Difficulty, Benchmarks, and Algo Switching.  A section on "how to set profitability factors" would be nice.

Thanks.

SOMe day I guess but it's been mentioned and discussed in this thread a few times now...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 23, 2017, 03:44:47 PM
Can you include some kind of tutorial on how to set the profitability factors on your website?  Most people won't find the info in this thread since it's so huge now.

https://bitcointalk.org/index.php?topic=1751272.msg19010061#msg19010061

Would go great in your "Links" section, which already include useful stuff like API, Difficulty, Benchmarks, and Algo Switching.  A section on "how to set profitability factors" would be nice.

Thanks.

SOMe day I guess but it's been mentioned and discussed in this thread a few times now...

Correct.  That's precisely the problem - it's been discussed in this thread a few times, making it hard to search for the info.  I've been mining at zpool for a while now, and only now do I have a slight idea on how to implement it based on the info spread all over this thread.

https://bitcointalk.org/index.php?topic=1751272.msg19009771#msg19009771
https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405
https://bitcointalk.org/index.php?topic=1777336.msg17729122  (Actually Nemo's scripts is a good place to look at how/why it's done).
https://bitcointalk.org/index.php?topic=1260863.msg15119470#msg15119470 (Jared's script as well).
https://bitcointalk.org/index.php?topic=1260863.msg15933612#msg15933612

Also I noticed a ",stats" in the password field.  I haven't seen this documented anywhere.  Just guessing, but does that send statistic info (miner used, version, speed, etc) to your pool?

Lots of hidden gems that need to be documented somewhere.  This is a nice pool, but it's not the easiest to figure out for anything but just point-and-mine.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 23, 2017, 04:11:01 PM
Crackfoo, if you want, you can just copy paste this to your site so you don't have to worry about typing up a whole essay yourself.

Anyone can format it, give credit, make corrections, etc.

The Profitability Factor (PF) is used to determine which is the best algo to mine for profitability based on your hardware.  You can think of the PF as the speed at which your particular miner can mine.  This will let the pool decide what is the most profitable algo to mine for you.

This helps because what's profitable for an AMD GPU may not be profitable for a nVidia GPU (and vice versa).

Here's what you need to keep in mind when determining your PF numbers:
PF numbers are in MH/s for most algos.
For SHA256 and blake algos, they are in GH/s.
For equihash, it's kSol/s

How to determine your PF number:
Use whatever miner, options, arguments, syntax (etc) you normally would for each algo.
Example:
ccminer -r 0 -a x13 -i 17.5 -o stratum+tcp://x13.mine.zpool.ca:3633 -u 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu -p c=BTC,x13

Mine for a few minutes so the miner can get up to a stable speed.  This speed is what you will use for your PF number.

You will have to repeat this for each algo you wish to mine.



Some PF numbers determined by JaredKaragen:

GTX 750Ti
x17=1.8
nist5=8.5
x11evo=2.7
sib=0.725
x13=2.3
x14=2.14
x15=1.8
x11=2.7
qubit=4.2
lyra2v2=6.2
blakecoin=1.4
blake2s=0.89
neoscrypt=0.155
decred=0.475
skein=73.5
lbry=44.2
c11=2.74
quark=5.0

GTX 980
x17=5.2
nist5=8.0
x11evo=7.7
sib=1.1
x13=6.8
x14=7.0
x15=5.6
x11=8.2
qubit=12.5
lyra2v2=22.0
blakecoin=1.4
blake2s=1.2
neoscrypt=0.651
decred=1.7
skein=293.0
lbry=157.0
c11=8.3
groestl=24.5
quark=11.5

GTX 1070 FTW DT 8G
x17=7.7 ccminer 1.7
nist5=41.9 ccminer 1.8-dev
x11evo=11.8 ccminer 1.8-dev
sib=1.7 ccminer 1.8-dev
x13=10.3 1.5.74-git(SP-MOD)
x14=9.6 ccminer 1.7
x15=8.2 ccminer 1.8.dev
x11=12.1 ccminer 1.8.dev
qubit=18.5 ccminer 1.8.dev
lyra2v2=37.2 ccminer 1.7.6
blakecoin=4.1 ccminer 1.8.dev
blake2s=1.7 ccminer 1.7.6
neoscrypt=0.922 ccminer 1.8.3
decred=2.2
skein=400.0
lbry=270.0
c11=12.74
groestl=37.1
quark=18.4
keccak=550.0 ccminer 1.7.6
myr-gr=55.9 ccminer 1.7

As you can see, depending on the make/model, factory overclock, your own over/under clock/voltage, temperatures, and even the specific miner program and version, your speed can be wildly different.  This is why you could better fine tune the PF numbers yourself.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 23, 2017, 04:25:47 PM

Also I noticed a ",stats" in the password field.  I haven't seen this documented anywhere.  Just guessing, but does that send statistic info (miner used, version, speed, etc) to your pool?

Lots of hidden gems that need to be documented somewhere.  This is a nice pool, but it's not the easiest to figure out for anything but just point-and-mine.

Stats is documented here:
http://zpool.ca/site/benchmarks

Which the benchmarks at the top can also be used to get a decent profitability factor for the multialgo by looking up your GPU type and seeing what miner the person used and what hash rate they were getting.  Ultimately though you'd want to do your own benchmarking.

Ultimately though I wouldn't recommend anyone do Multi-algo unless they understand the concepts that affect all mining.  There is a lot of tinkering and fiddling that goes with getting it working well.  Things that are going to be unique to your setup and people aren't always going to have a clear and concise answer on how to fix the problems that you might be seeing.



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 23, 2017, 04:47:48 PM
Stats is documented here:
http://zpool.ca/site/benchmarks

Which the benchmarks at the top can also be used to get a decent profitability factor for the multialgo by looking up your GPU type and seeing what miner the person used and what hash rate they were getting.  Ultimately though you'd want to do your own benchmarking.

Ultimately though I wouldn't recommend anyone do Multi-algo unless they understand the concepts that affect all mining.  There is a lot of tinkering and fiddling that goes with getting it working well.  Things that are going to be unique to your setup and people aren't always going to have a clear and concise answer on how to fix the problems that you might be seeing.



Ah, thanks for the info on stats.

And finding info on the PF is one of the steps to take in understanding the concepts.  I've been mining for a while without knowing this info, but now I want to know more - learn to do better.  In order to tinker and fiddle, I wanted to understand how to set those PFs.  Now I do, and I want to share that info.

The problem is it seems a few do know and have info (like this) in this thread somewhere.  Then it gets burried.  Search may or may not unearth it, depending on the search terms you use.  Since the pool owner has a nice area where advanced info is posted on his website, I'd say please include info on the PF.  I'd even say it makes a good subsection of the Multi-Algo switching area, where you already have the bench and stats info (because this is what you need to determine your PF anyways).


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 23, 2017, 07:09:05 PM

Ah, thanks for the info on stats.

And finding info on the PF is one of the steps to take in understanding the concepts.  I've been mining for a while without knowing this info, but now I want to know more - learn to do better.  In order to tinker and fiddle, I wanted to understand how to set those PFs.  Now I do, and I want to share that info.

The problem is it seems a few do know and have info (like this) in this thread somewhere.  Then it gets burried.  Search may or may not unearth it, depending on the search terms you use.  Since the pool owner has a nice area where advanced info is posted on his website, I'd say please include info on the PF.  I'd even say it makes a good subsection of the Multi-Algo switching area, where you already have the bench and stats info (because this is what you need to determine your PF anyways).

I understand I was in your shoes not that long ago.  The response I got from crackfoo is he doesn't do Multi-algo so he didn't really have much information to offer to me.  I've since figured it out through various posts in this thread and just playing with the settings.

For example if you include decred in your password string it will not allow you to do a custom fixed difficulty with the d=XXX option.  Crackfoo said he's tried to get it fixed a couple of times, but it is still a problem.

Also it can be really difficult to know if the multi-algo process is actually working the way that you intend.  Part of the issue is that many coins take multiple days to mature and confirm that your returns will likely look low for the first few days at least.  It should balance out in time, but I would not look to the first 3 days for averages of your earnings unless you avoid the algorithms with long maturing coins.  Netko on Nist5 seems to be the worst offender in delayed payouts.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 23, 2017, 07:13:19 PM
Thanks guy, looks like a good start to add to the multi algo page. I'll work on that next week when I get back.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 23, 2017, 09:20:14 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 23, 2017, 10:28:26 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg

you may want to add more algos so you have more options.. as blake2s has tanked in price last 48hours as it got added to "nicehash" 


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 23, 2017, 10:32:48 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg

hmq1725 is broke need to disable it for now..

Im currently only mining equihash, skein, and blake2s as my rotation


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 23, 2017, 10:36:39 PM
hi crackfoo is hmq1725 algud at your end reporting very low hash rate on pool..

Regards
Nemo

still having problems with hmq1725 crackfoo

I restarted it a couple hours ago... don't really see much on poolside error wise...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 23, 2017, 10:47:37 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg

hmq1725 is broke need to disable it for now..

Im currently only mining equihash, skein, and blake2s as my rotation

equihash i find doesnt perform that well so i have it disabled myself.. (although since zen got added its been doing pretty well could be worth leaving enabled)

skein i also have disabled

blake2s has tanked in price last 48hours as it got added to "nicehash"

i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 23, 2017, 11:04:37 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg

hmq1725 is broke need to disable it for now..

Im currently only mining equihash, skein, and blake2s as my rotation

equihash i find doesnt perform that well so i have it disabled myself..

skein i also have disabled

blake2s has tanked in price last 48hours as it got added to "nicehash"

i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s

I need to sit down and take the time to rewrite my batch file... i recently learned how to tune the cards via the batch file so it switches core and mem settings when it starts a new algo... atleast on the pascal cards....not figured it out on any other cards yet


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 23, 2017, 11:07:47 PM
or you could just run of my batch's already done just choose the algos you want..

and use software to OC and UV  (EVGA - Software - Precision XOC)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 23, 2017, 11:14:23 PM
or you could just run of my batch's already done just choose the algos you want..

and use software to OC and UV  (EVGA - Software - Precision XOC)

I know what your miner does... what im talking about is as the pool switches the algo, the new algo starts up and changes the OC and UV settings i have preprogrammed in the batch file to that specific algo... right now i only have it working on skein, blake2s, and equihash... basically it allows me to run the memory intensive algo's with +400ish on memory on them, then when it switches to skein it drops down the memory by 1000 and rasies the core by +317 on the GPU's on the rig i have been testing it on...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 23, 2017, 11:43:23 PM
or you could just run of my batch's already done just choose the algos you want..

and use software to OC and UV  (EVGA - Software - Precision XOC)

I know what your miner does... what im talking about is as the pool switches the algo, the new algo starts up and changes the OC and UV settings i have preprogrammed in the batch file to that specific algo... right now i only have it working on skein, blake2s, and equihash... basically it allows me to run the memory intensive algo's with +400ish on memory on them, then when it switches to skein it drops down the memory by 1000 and rasies the core by +317 on the GPU's on the rig i have been testing it on...

sounds interesting


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on June 24, 2017, 02:27:42 AM
Hey

Does anyone mine alt coins there? and not do the btc exchange?

If so...do you get paid out ur available mined balance in full all the time?

It doesnt seem to do that for me...especially with mining DP.

I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Lercker on June 24, 2017, 05:27:26 AM
Hey

Does anyone mine alt coins there? and not do the btc exchange?

If so...do you get paid out ur available mined balance in full all the time?

It doesnt seem to do that for me...especially with mining DP.

I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
Coins that are often short or with long confirmation periods are often paid only in part. The pool is currently 4900 short for DP, which is a lot for a coin with a block size of 27, even if it is not difficult to mine. I might switch payout address or go to a back up pool until the pool catches up some.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 24, 2017, 05:53:06 AM
im disabling blake2s for a few days, im already in the 700's on immatures for the week on blake2s coins... i have a few hundred worth of btc tied up in immatures from these massive delays in exchanges... 


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: xxkaiwaxx on June 24, 2017, 06:56:35 AM
Hey

Does anyone mine alt coins there? and not do the btc exchange?

If so...do you get paid out ur available mined balance in full all the time?

It doesnt seem to do that for me...especially with mining DP.

I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
Coins that are often short or with long confirmation periods are often paid only in part. The pool is currently 4900 short for DP, which is a lot for a coin with a block size of 27, even if it is not difficult to mine. I might switch payout address or go to a back up pool until the pool catches up some.

OH YUP that makes much more sense now.

I remember reading that at some point on the zpool site..but too noob to absorb exactly what it meant back then..

Got it now.  THANK U!!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 24, 2017, 02:37:37 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg

hmq1725 is broke need to disable it for now..

Im currently only mining equihash, skein, and blake2s as my rotation

equihash i find doesnt perform that well so i have it disabled myself..

skein i also have disabled

blake2s has tanked in price last 48hours as it got added to "nicehash"

i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s

I need to sit down and take the time to rewrite my batch file... i recently learned how to tune the cards via the batch file so it switches core and mem settings when it starts a new algo... atleast on the pascal cards....not figured it out on any other cards yet

Merry Christmas

Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=BTC ADDRESS HERE
SET PASS=RIG02,c=BTC,skein=4200,blake2s=36,stats
SET CCMINER=C:\CRYPTO\MINERS\CCMINER\

:start
ECHO Setting Optimized System Values
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ECHO multi-algo Switcher....

ECHO Setting optimized Clocks.....
@echo off

REM --------SKIEN---------
SET GPU0=-setBaseClockOffset:0,0,250 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,250 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,250 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,250 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,250 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,250 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,250 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%

CD %CCMINER%

ECHO Starting Miner.....
ccminer_sp.exe -r 0 -t 7 -a skein -i 25.25 -o stratum+tcp://skein.mine.zpool.ca:4933/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%

ECHO Setting optimized Clocks.....
@echo off

REM --------BLAKE2S--------
SET GPU0=-setBaseClockOffset:0,0,275 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,275 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,275 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,275 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,275 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,275 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,275 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%

CD %CCMINER%

ECHO Starting Miner.....
ccminer_tpruvot.exe -r 0 -t 7 -a blake2s -i 30 -o stratum+tcp://blake2s.mine.zpool.ca:5766/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%


goto start






Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 24, 2017, 04:07:34 PM
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
https://farm5.staticflickr.com/4218/35105508280_4657c0a04a_z_d.jpg

hmq1725 is broke need to disable it for now..

Im currently only mining equihash, skein, and blake2s as my rotation

equihash i find doesnt perform that well so i have it disabled myself..

skein i also have disabled

blake2s has tanked in price last 48hours as it got added to "nicehash"

i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s

I need to sit down and take the time to rewrite my batch file... i recently learned how to tune the cards via the batch file so it switches core and mem settings when it starts a new algo... atleast on the pascal cards....not figured it out on any other cards yet

Merry Christmas

Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=BTC ADDRESS HERE
SET PASS=RIG02,c=BTC,skein=4200,blake2s=36,stats
SET CCMINER=C:\CRYPTO\MINERS\CCMINER\

:start
ECHO Setting Optimized System Values
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ECHO multi-algo Switcher....

ECHO Setting optimized Clocks.....
@echo off

REM --------SKIEN---------
SET GPU0=-setBaseClockOffset:0,0,250 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,250 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,250 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,250 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,250 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,250 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,250 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%

CD %CCMINER%

ECHO Starting Miner.....
ccminer_sp.exe -r 0 -t 7 -a skein -i 25.25 -o stratum+tcp://skein.mine.zpool.ca:4933/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%

ECHO Setting optimized Clocks.....
@echo off

REM --------BLAKE2S--------
SET GPU0=-setBaseClockOffset:0,0,275 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,275 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,275 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,275 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,275 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,275 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,275 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%

CD %CCMINER%

ECHO Starting Miner.....
ccminer_tpruvot.exe -r 0 -t 7 -a blake2s -i 30 -o stratum+tcp://blake2s.mine.zpool.ca:5766/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%


goto start






Wow, you did exactly what I have been trying to self teach myself for days lol.....I did it slightly different than the way you did it, but I like how clean yours is so ima transfer my stuff over to your layout.....I managed to get it dialed in on 5 different algos lastnight.....I'm having issues with it exiting z miner for equihash...it sometimes fails to close it before starting the next algo on ccminer ... have this issue?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 24, 2017, 04:27:58 PM
hmq1725 Is reporting low hash rates again.  It's actually affecting the pay %.

It was fine after the first time we reported it, but it's happening again now. :(


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 24, 2017, 04:35:09 PM
hmq1725 Is reporting low hash rates again.  It's actually affecting the pay %.

It was fine after the first time we reported it, but it's happening again now. :(

Its off by 1000


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 24, 2017, 04:38:01 PM
http://i.imgur.com/v5x0Q9q.png

Just another 100 GH or so and we get a fee drop!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 24, 2017, 04:51:21 PM
hmq1725 Is reporting low hash rates again.  It's actually affecting the pay %.

It was fine after the first time we reported it, but it's happening again now. :(

Its off by 1000

I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.

It's not just a reporting/cosmetic issue because the payouts reflect the performance.  I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 24, 2017, 05:05:30 PM
MAn, I picked the wrong time to take a few days away from forums.


Most info people have been requesting is in my batch link in my signature;  how to normalize, etc... but looks like its all sorted now.


Still working on updates for my batch.

Ill probably integrate the core/clock modifications to the batch I see in the posts above me.

Will add some more convolution, but that's all right.

Right now I'm trying to get my "All batches in one" to work properly.   Lots to figure out still.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 24, 2017, 05:15:45 PM
Crackfoo,

Can you talk / explain Hashtap a little bit. I really like the idea but but i'm not sure who would use it at it's current price structure. It appears to be 2x the current algo 24 hour estimate.

for people to actually use it would it have to be less than current estimate?

like somewhere between 90%-95% of 24 hr est.???


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 24, 2017, 05:34:17 PM
Crackfoo,

Can you talk / explain Hashtap a little bit. I really like the idea but but i'm not sure who would use it at it's current price structure. It appears to be 2x the current algo 24 hour estimate.

for people to actually use it would it have to be less than current estimate?

like somewhere between 90%-95% of 24 hr est.???

Remember it's the miners multipool. No miner will want to give their hash away at a price less than what they can be by mining coins so the price will most always be slightly higher than mining would make. Keep in mind there is no order fees or work restart penelties  or order cancel fees like you get by using Nicehash.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 24, 2017, 05:58:30 PM
hmq1725 Is reporting low hash rates again.  It's actually affecting the pay %.

It was fine after the first time we reported it, but it's happening again now. :(

Its off by 1000

I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.

It's not just a reporting/cosmetic issue because the payouts reflect the performance.  I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).



I'm seeing the same thing.  I think I'm disabling hmq1725 for now.   Not sure why the pool hashrate is so low compared to what local miners are saying.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 24, 2017, 06:21:11 PM
hmq1725 Is reporting low hash rates again.  It's actually affecting the pay %.

It was fine after the first time we reported it, but it's happening again now. :(

Its off by 1000

I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.

It's not just a reporting/cosmetic issue because the payouts reflect the performance.  I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).



I'm seeing the same thing.  I think I'm disabling hmq1725 for now.   Not sure why the pool hashrate is so low compared to what local miners are saying.


Technically your paid by the share and the hashrate is simply something that's calculated from that. Once I'm back I'll check and see with the yiimp dev to see about changing the hashrate calculation. It's not going to change anything in regards to your connection, just a GUI fix.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 24, 2017, 06:32:04 PM
hmq1725 Is reporting low hash rates again.  It's actually affecting the pay %.

It was fine after the first time we reported it, but it's happening again now. :(

Its off by 1000

I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.

It's not just a reporting/cosmetic issue because the payouts reflect the performance.  I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).



I'm seeing the same thing.  I think I'm disabling hmq1725 for now.   Not sure why the pool hashrate is so low compared to what local miners are saying.


Technically your paid by the share and the hashrate is simply something that's calculated from that. Once I'm back I'll check and see with the yiimp dev to see about changing the hashrate calculation. It's not going to change anything in regards to your connection, just a GUI fix.

But the earnings of everything reporting on the site seems to indicate that it's not paying out what the site is reporting it should.  All graphs look flat, the hashrates of the workers are showing significantly lower than what is being reported locally.  Are you saying that we should see similar earnings to what we've seen in the past few days if we keep mining hmq1725?  I trust you, but it's very hard to judge if our miners are actually effective when the tools to measure the performance on the pool show otherwise.

I do see that I was getting shares of a few Esper mined, but again it seems near impossible to know what returns that we can expect from it when the graphs are all showing either flat or decreasing earnings.




Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 24, 2017, 06:43:49 PM
fwiw;  yesterday on a larger machine only got one payout, when its normally 2-3 a day.

Profitability was down for ~22 hours or so give or take.



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 24, 2017, 08:13:31 PM
There is something going on. My scrypt miners have been acting funny all day. It's pool side. Just look at the pool hashrate and look at the sharp drops.


http://i.imgur.com/WlQXYDC.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 24, 2017, 09:34:30 PM
crackfoo, had the same issue with equihash - both machines start spinning nicely, then suddenly we mine Komodo, finish it, probably pool switches to other coin and the interface rejects (red line and percentage) jump up to 95% rejects on whatever else we start mining. It disappeared with Zen, now I see Zen is back again. Is it possible that we have an issue with it?

http://i.imgur.com/xQWRRck.png

Whatever the interface shows, that's about 7.3 kS that gives me abount the same percentage from the total hashpower. I just pointed one miner at the equihash again and I will report if it's the same.

EDIT - so far so good, couple of Komodos and still no rejects.

There is something going on. My scrypt miners have been acting funny all day. It's pool side. Just look at the pool hashrate and look at the sharp drops.

http://i.imgur.com/WlQXYDC.png

During payouts?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 24, 2017, 10:48:58 PM
Just happened:
http://i.imgur.com/xMoBhvO.png
See how hashrate dropped, despite me having 6% of the hashpower. I think it happens right after we finish one coin and switch to another (and that is not Komodo and Zcl, I guess)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 24, 2017, 11:46:30 PM
The height of the red rejects is on a different scale than the rest of the graph.   I've noticed that even 1 or 2 rejected shares will create a very large spike on the graph even though it is only a couple rejected shares.

Still something that should be investigated if possible


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on June 25, 2017, 01:33:24 AM
you guys have to realize   somewhere somehow some graphing dev is sitting back lhao. ;D


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 25, 2017, 02:02:32 AM
The height of the red rejects is on a different scale than the rest of the graph.   I've noticed that even 1 or 2 rejected shares will create a very large spike on the graph even though it is only a couple rejected shares.

Still something that should be investigated if possible

It's simple.  Hashrate makes the graph 0-2gh let's say.   the rejects are a flat 0-100 scale.  I think the vertical scale is staying matched with the hashrate display instead of its own 0-100%.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 25, 2017, 05:25:12 AM
for multi-algo,

SET PASS format for equihash is in ksol correct? so if the miner reports 4242sols, i place it in the SET PASS line as 4.242 correct? just trying to fine tune some errors i may have made... noticed that i have been mining non-stop equihash all day since adding it to my multi-algo switcher batch


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 25, 2017, 07:17:38 AM
for multi-algo,

SET PASS format for equihash is in ksol correct? so if the miner reports 4242sols, i place it in the SET PASS line as 4.242 correct? just trying to fine tune some errors i may have made... noticed that i have been mining non-stop equihash all day since adding it to my multi-algo switcher batch

That seems right to me, but might want to round it to less digits if it doesn't seem to work right.  Maybe to 4.24 or 4.2


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: icolsuineg on June 25, 2017, 07:34:09 AM
The height of the red rejects is on a different scale than the rest of the graph.   I've noticed that even 1 or 2 rejected shares will create a very large spike on the graph even though it is only a couple rejected shares.
And there is the number in the right corner ;)

90.6%


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 25, 2017, 07:57:15 AM
hmq1725 Is working fine again.  Seeing the hasrate back (and the share % is back up).

So when it was defective, the pool only saw hashrates in the kh/s range (60-100 kh/s) and I was getting only around 0.1- 0.2% of the shares.  Also, finding blocks took forever.

Now, I see 13.7MH/s (still not the full 15.5 MH/s as I'm seeing on my miner) but my share is now in the 2.6% area and blocks found much faster.

I don't think it's just a graphing problem.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 25, 2017, 11:15:26 AM
BTW, is there a condition where the pool will ignore the difficulty?  Equihash is always set to 127 no matter what I put in the password.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 25, 2017, 12:51:39 PM
As stated yesterday, something is going on with scrypt. Maybe its a coin the pool doesnt like. There is no way I should have 16% reject shares. my machines show solid 504MH each. The pool isnt even showing each worker.

http://i.imgur.com/OKEzO9L.png

http://i.imgur.com/mTVhzS8.png







Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AK74XXX on June 25, 2017, 04:56:12 PM
Hey, what happened to MonetaryUnit (MUE)

It disappeared from everywhere at one moment, but looks like alive unseen: blocks are being found, transactions confirmed, balances updated... but unpaid. WTF, plz?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 25, 2017, 04:58:27 PM
Hey, what happened to MonetaryUnit (MUE)

I disappeared from everywhere at one moment, but looks like alive unseen: blocks are being found, transactions confirmed, balances updated... but unpaid. WTF, plz?

How about you follow the mue thread? Coins are being swapped. When they are, things will resume.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AK74XXX on June 25, 2017, 05:10:00 PM
Oh. sry, I'm new to bitcointalks, don't know where to search first :)

Btw, couldn't find the answer: is there a way to make so-called "NiceHash/1.0.0" miner (bought hashpower) to connect w/xnsub? If I got the idea correctly, in some cases that could reduce NiceHash switching charges.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 25, 2017, 05:11:35 PM
i disabled equihash on all my rigs.... it keeps loosing connection to server randomly for upwards of an hour and reconnects seem to take forever, but oddly closing the miner and restarting it fixes the issue until next disconnect
https://farm5.staticflickr.com/4265/35529090375_5f8fe62ac8_z_d.jpg


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 25, 2017, 06:12:47 PM
I moved all my scrypt until pool issues get resolved.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 26, 2017, 05:30:04 AM
hmq1725 reporting low hash rate again.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 26, 2017, 05:47:39 AM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 26, 2017, 05:49:43 AM
i disabled equihash on all my rigs.... it keeps loosing connection to server randomly for upwards of an hour and reconnects seem to take forever, but oddly closing the miner and restarting it fixes the issue until next disconnect
https://farm5.staticflickr.com/4265/35529090375_5f8fe62ac8_z_d.jpg

I have managed to fix the issue i posted earlier on equihash with a band aid tell server side figures out connection issues... i added --eexit 3 to the miner, which moves on to the next algo if it fails to reconnect after 3 trys


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 26, 2017, 06:21:02 AM
problem with doing that and leaving equihash in the password string is the pool still can try and switch you to it;  when its not connecting....  unless the stratum not connecting only happens after its been mining equihash for a bit..... then it could be a viable solution.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 26, 2017, 11:15:00 AM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

What is a good difficulty to set to for 6.8 Mh/s?

Also, how would you modify Nemosminer 2.0.4 PowerShell script to incorporate that just for hmq1725?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 26, 2017, 11:57:26 AM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

I just bumped the starting diff to 64 from 8.



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: guytechie on June 26, 2017, 12:16:02 PM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

I just bumped the starting diff to 64 from 8.



Thanks.  I think that helped, but will wait to see if it stays that way.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 26, 2017, 04:32:17 PM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

I just bumped the starting diff to 64 from 8.



Speaking of difficulty. Nicehash will not allow zpool as a pool due to low diff. Might be an opportunity for you.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: gruntbull on June 26, 2017, 06:33:20 PM
i disabled equihash on all my rigs.... it keeps loosing connection to server randomly for upwards of an hour and reconnects seem to take forever, but oddly closing the miner and restarting it fixes the issue until next disconnect
https://farm5.staticflickr.com/4265/35529090375_5f8fe62ac8_z_d.jpg

Storx, I am getting similar issues - equihash either has disconnets or HIGH (90%) reject rate (stock settings 82% power NO OC on 6x1080tis). On my 2 card test rig I have no issues with it.

I think I will do the same, take it out of my multi-algo until it is resolved.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 26, 2017, 06:56:42 PM
i disabled equihash on all my rigs.... it keeps loosing connection to server randomly for upwards of an hour and reconnects seem to take forever, but oddly closing the miner and restarting it fixes the issue until next disconnect
https://farm5.staticflickr.com/4265/35529090375_5f8fe62ac8_z_d.jpg

Storx, I am getting similar issues - equihash either has disconnets or HIGH (90%) reject rate (stock settings 82% power NO OC on 6x1080tis). On my 2 card test rig I have no issues with it.

I think I will do the same, take it out of my multi-algo until it is resolved.

where are you seeing your rejects? on your miner? If it's the pool, disregard it, it's not able to calculate rejects properly. I've been running 200Ksol for a couple hours now and no reported rejects miner side, but my stats showed some.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 26, 2017, 06:59:53 PM

where are you seeing your rejects? on your miner? If it's the pool, disregard it, it's not able to calculate rejects properly. I've been running 200Ksol for a couple hours now and no reported rejects miner side, but my stats showed some.

Rejects at pool
Share above target   0.0000 MSol/s   0.0000 MSol/s
Stale share   0.0000 MSol/s   0.0001 MSol/s
Duplicate share   0.0000 MSol/s   0.0000 MSol/s
Invalid nTime   0.0000 MSol/s   0.0000 MSol/s
Invalid worker   0.0000 MSol/s   0.0000 MSol/s
Other   0.0000 MSol/s   0.0000 MSol/s


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 26, 2017, 07:00:41 PM

where are you seeing your rejects? on your miner? If it's the pool, disregard it, it's not able to calculate rejects properly. I've been running 200Ksol for a couple hours now and no reported rejects miner side, but my stats showed some.

Rejects at pool
Share above target   0.0000 MSol/s   0.0000 MSol/s
Stale share   0.0000 MSol/s   0.0001 MSol/s
Duplicate share   0.0000 MSol/s   0.0000 MSol/s
Invalid nTime   0.0000 MSol/s   0.0000 MSol/s
Invalid worker   0.0000 MSol/s   0.0000 MSol/s
Other   0.0000 MSol/s   0.0000 MSol/s

a/some stale shares but nothing I'd be concerned about.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 26, 2017, 07:10:25 PM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

I just bumped the starting diff to 64 from 8.



Speaking of difficulty. Nicehash will not allow zpool as a pool due to low diff. Might be an opportunity for you.

What algo??? AFAIK NH doesn't offer hmq1725.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 26, 2017, 08:09:48 PM
i disabled equihash on all my rigs.... it keeps loosing connection to server randomly for upwards of an hour and reconnects seem to take forever, but oddly closing the miner and restarting it fixes the issue until next disconnect
https://farm5.staticflickr.com/4265/35529090375_5f8fe62ac8_z_d.jpg

Storx, I am getting similar issues - equihash either has disconnets or HIGH (90%) reject rate (stock settings 82% power NO OC on 6x1080tis). On my 2 card test rig I have no issues with it.

I think I will do the same, take it out of my multi-algo until it is resolved.

where are you seeing your rejects? on your miner? If it's the pool, disregard it, it's not able to calculate rejects properly. I've been running 200Ksol for a couple hours now and no reported rejects miner side, but my stats showed some.

The miner is loosing connection to the server at random intervals and seems to reject reconnects for long periods of time. I can assure you its not my internet or miners, because its happening within seconds of one another on ALL my rigs and half are located at a different location on a completely different ISP service.

Just today monitoring my 1 rig i left on equihash.. i noticed that it seems to disconnect right around the peaks of the day when the miner count spikes high from everyone switching... and if you do manage to not get disconnected.. the miner will report a ton of errors for a few minutes tell things settle down.. its like a 50/50 on the disconnect vs error phase occurring..
 https://farm5.staticflickr.com/4255/35423780311_682d3bbf63_k_d.jpg



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: minerx117 on June 26, 2017, 08:19:32 PM
don't pay any attention to the graphs they are rubbish... just monitor the miner console..

Nemo


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AceIsAngry79 on June 26, 2017, 08:27:25 PM
Do anny know how to setupp Yellowjacket 2.2 GH/s USB ASIC Miner (Nanofury) whit BFGMiner to work whit Zpool?

https://www.amazon.ca/Yellowjacket-2-2-ASIC-Miner-Nanofury/dp/B00I21R4HG


I have tryd sha256.mine.zpool.ca:3333  but BGFminer says "All the pools are dead".

Sorry for my bad english.

SINCERELY

Benny


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 26, 2017, 08:28:02 PM
don't pay any attention to the graphs they are rubbish... just monitor the miner console..

Nemo

I know this, i was just giving him the graph to give him an idea of when the issues were happening, not any numerical value to how many errors.. just a timeline compared to traffic spikes... good job on the miner btw, i tested it out lastnight.. but i found it locking up my rigs to often.. so i switched back the miner i have been using.. look forward to your future progress..


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: gruntbull on June 26, 2017, 10:38:24 PM
i disabled equihash on all my rigs.... it keeps loosing connection to server randomly for upwards of an hour and reconnects seem to take forever, but oddly closing the miner and restarting it fixes the issue until next disconnect
https://farm5.staticflickr.com/4265/35529090375_5f8fe62ac8_z_d.jpg

Storx, I am getting similar issues - equihash either has disconnets or HIGH (90%) reject rate (stock settings 82% power NO OC on 6x1080tis). On my 2 card test rig I have no issues with it.

I think I will do the same, take it out of my multi-algo until it is resolved.

where are you seeing your rejects? on your miner? If it's the pool, disregard it, it's not able to calculate rejects properly. I've been running 200Ksol for a couple hours now and no reported rejects miner side, but my stats showed some.
1) I get some miner side - some server side (or reported on server side).

2) Last statement was confirmation of server side rejects not being factual - no need to reply (edited)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JarBinks on June 27, 2017, 03:51:15 PM
HI!!  ;D

Looks as though NiceHash has changed the minimum difficulty for Qubit.

http://i.imgur.com/v6bc3PW.png

https://www.nicehash.com/?p=pool-operators (https://www.nicehash.com/?p=pool-operators)




Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 27, 2017, 03:57:17 PM
Any idea what these VirtuaUnique coins that are getting mined in Nist5?  They don't seem to show how many blocks are required for maturity.

https://i.imgur.com/yk6J8ZT.png

Don't see it listed under the Nist5 pool, but seen them show up a few times now.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 27, 2017, 06:32:51 PM
HI!!  ;D

Looks as though NiceHash has changed the minimum difficulty for Qubit.

http://i.imgur.com/v6bc3PW.png

https://www.nicehash.com/?p=pool-operators (https://www.nicehash.com/?p=pool-operators)




fixed


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 27, 2017, 06:34:50 PM
Any idea what these VirtuaUnique coins that are getting mined in Nist5?  They don't seem to show how many blocks are required for maturity.

https://i.imgur.com/yk6J8ZT.png

Don't see it listed under the Nist5 pool, but seen them show up a few times now.

Not all my coins are visible for a number of reasons. A couple being, maintaining profiability and testing new coins. Probably another 10 or so that are hidden. you still get your credits for them of course.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 28, 2017, 12:44:50 AM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

I just bumped the starting diff to 64 from 8.



Speaking of difficulty. Nicehash will not allow zpool as a pool due to low diff. Might be an opportunity for you.

What algo??? AFAIK NH doesn't offer hmq1725.

Oops, Scrypt. NH will not allow me to rent and point scrypt to zpool due to low diff


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 28, 2017, 01:00:15 AM
hmq1725 reporting low hash rate again.

I think the issue your having is the same i was having.. it starts off to low in dif, literally thousands of pieces being processed at once.. once i moved my diff up on the miner, it slowed it down and started reporting correctly... some reason the algo starts off in a super low diff and gets stuck there.. for me it was processing like 5600 sections per second at one time.. so you would get this spamming list of accepted completions.. also many were rejected due to bandwidth clutter to the cpu...

I just bumped the starting diff to 64 from 8.



Speaking of difficulty. Nicehash will not allow zpool as a pool due to low diff. Might be an opportunity for you.

What algo??? AFAIK NH doesn't offer hmq1725.

Oops, Scrypt. NH will not allow me to rent and point scrypt to zpool due to low diff

Seems ok now:

Received mining.set_difficulty... OK: difficulty=8192
Received mining.notify work... OK

Pool verification process is complete. Tested pool is compatible!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 28, 2017, 05:31:54 AM
Crackfoo, can you please take a look into the equihash connection issues.... i just looked through my output file i spit to a text document the last 24 hours, i lost connection to equihash 61 times during mining with failed to reconnect attempts 3 times each, forcing my batch to switch to another algo to mine... i would really like to switch my other rigs back over to allow mining of equihash, since its one of the more profitable ones currently.. but the disconnects are brutal throughout the day...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: dragonmike on June 28, 2017, 04:04:41 PM
Crackfoo, you should really publish a stat/graph showing Nemo's daily profitability vs straight Zcash. I believe it's a great benchmark and would highlight how well the coin+algo switching is doing. A bit like an advanced version of Webbson's poolpicker, whacha think?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AceIsAngry79 on June 28, 2017, 04:27:13 PM
Do anny know how to setupp Yellowjacket 2.2 GH/s USB ASIC Miner (Nanofury) whit BFGMiner to work whit Zpool?

https://www.amazon.ca/Yellowjacket-2-2-ASIC-Miner-Nanofury/dp/B00I21R4HG


I have tryd sha256.mine.zpool.ca:3333  but BGFminer says "All the pools are dead".

Sorry for my bad english.

SINCERELY

Benny

No one can help me make it work?

SINCERELY

Benny


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 28, 2017, 05:33:36 PM
Crackfoo, can you please take a look into the equihash connection issues.... i just looked through my output file i spit to a text document the last 24 hours, i lost connection to equihash 61 times during mining with failed to reconnect attempts 3 times each, forcing my batch to switch to another algo to mine... i would really like to switch my other rigs back over to allow mining of equihash, since its one of the more profitable ones currently.. but the disconnects are brutal throughout the day...

I get emailed anytime one of my stratums resets. equihash was none for 24h until this mornings payments...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Megaquake on June 28, 2017, 07:57:46 PM
Decred is where the profit is right now!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AceIsAngry79 on June 28, 2017, 09:07:19 PM
[2017-06-28 23:06:19] Stratum connection failed: Failed to connect to x11.mine.zpool.ca port 3533: Connection refused
[2017-06-28 23:06:21] ...retry after 30 seconds


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: merlinsbeard on June 28, 2017, 09:19:56 PM
[2017-06-28 23:06:19] Stratum connection failed: Failed to connect to x11.mine.zpool.ca port 3533: Connection refused
[2017-06-28 23:06:21] ...retry after 30 seconds

I am also experiencing stratum connection problems.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: D8V1D on June 28, 2017, 09:30:30 PM
http://i.imgur.com/JwlPx5E.png

Why can't you fix the Equihash graph?
It's the only algorithm chart that's messed up for me.

Also, why not add ZEC to the pool?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 28, 2017, 09:32:15 PM
[2017-06-28 23:06:19] Stratum connection failed: Failed to connect to x11.mine.zpool.ca port 3533: Connection refused
[2017-06-28 23:06:21] ...retry after 30 seconds

I am also experiencing stratum connection problems.

Same.

Could be a be a network problem at his host;  DDOS, etc.  I am seeing it on the skien port.

Ive been getting hits and misses the past little bit today.   And now its back.    Seems to dip out for 1-2 min then come back.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 28, 2017, 09:43:25 PM
Decred is where the profit is right now!

http://i.imgur.com/8iCQc4B.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 28, 2017, 09:45:10 PM
I know eh! If only there was another 100+Gh, the fee's would be less ;) ;)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 28, 2017, 09:46:18 PM
seems there was some issue on the machine hosting stratums. Should be ok now.

Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 28, 2017, 11:56:42 PM
I think this was discussed a little bit, at least the second image. I think the reject hash rate is graphing on a different scale?

ALso, why is the daily profit 30%-40% of whatever the coin profitability is? I've never seen any coin ever as low as what the daily profit is.


http://i.imgur.com/z4l59nk.png


http://i.imgur.com/VP7PjOE.png


Has anyone said what the actual profits are? is the main correct or the coin profit?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Mikanoshi on June 29, 2017, 03:05:37 AM
Has anyone said what the actual profits are? is the main correct or the coin profit?
Does it matter?) Main profit is too low, coin profit is too high, they both don't show anything :D
Current profit for HUSH for example should be around 3.25, but it's almost 6 and 1.5 on zpool.
Get the arithmetical mean of these values to find the real profit I guess?)))

P.S. What program is this BTW? It shows values close to reality. multipoolminer
http://f22.ifotki.info/org/b330eaae298be14a927d5cdee7a1a49a5f6add281363038.jpg


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 29, 2017, 03:20:47 AM
Left value is current profit at current luck.

Right value is last 24 hour average of all profit I believe.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: SharkOne on June 29, 2017, 03:22:32 AM
Left value is current profit at current luck.

Right value is last 24 hour average of all profit I believe.

Don't forget that it's not computed using your actual hardware spec, so you have to do the math yourself:
Quote
* values in mBTC/MH/day, per GH for sha256 & blake algos, kSol. for equihash


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 29, 2017, 03:25:32 AM
Just did a couple hours of tuning and testing. Sorry for the stratum bumps. Hope there is some better efficiency and stability for those few there were seeing problems.

zzzz


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 29, 2017, 04:01:32 AM
Since my last post, i had 211 disconnects on equihash on the one rig still set to mine equihash 24/7.... 1 period it sat for 41minutes before it finally reconnected..


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: 95do on June 29, 2017, 05:45:22 AM
can someone please post a bat file for equihash ? do I use ccminer or ewbf miner? please post batfile example because my ccminer has no equihash algo


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JaredKaragen on June 29, 2017, 06:38:18 AM
can someone please post a bat file for equihash ? do I use ccminer or ewbf miner? please post batfile example because my ccminer has no equihash algo
Code:
equihash.exe --server equihash.mine.zpool.ca --user %ADDY% --pass c=BTC,equihash,stats --port 2142 --eexit 3
using ewbf.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: ilitirit on June 29, 2017, 11:17:23 AM
Decred is where the profit is right now!

How are you guys calculating potential profit?

This is my current understanding; please correct me if I'm wrong:

Using decred and 4x1060 3GB cards as an example:

- 0.95 mBTC/GH last 24h "actual" return (read below for why this is in quotes)
- GH/s = roughly 1.4 * 4 (from benchmarks page) = 5.6GH/s
- Therefore if all things remain the same, mBTC per day should be 5.6 * 0.95 = 5.32
- Translates at current prices into $13.83 per day

However, you have to take into account the price at which the coins will be sold.  This depends on confirmation time + batch creation time (sometime coins are sold in batches to reduce fees or because of exchange restrictions) + exchange rate and fees.  In other words, the coins you mine now may only be sold a few days later (NETKO is a good example) at prices that are different to what the mBTC per day value shows.  This means that the "Actual" 24 hour rate is only indicative of what the coins could return if everything remained the same.  But as we know it rarely does.  More often than not the value that is reported is not a useful guide over short periods of time.

Is my arithmetic and/or reasoning flawed?  Am I missing anything?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AK74XXX on June 29, 2017, 12:09:03 PM
crackfoo, should I open support ticket here or smbd give a quick look?  :)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 29, 2017, 12:16:42 PM
crackfoo, should I open support ticket here or smbd give a quick look?  :)

I don't see a way in NH to enable this, only if you are sending hash TO NH... Maybe a support ticket with them to see if they have a way to use #xnsub for sending hash to pools...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AK74XXX on June 29, 2017, 12:36:58 PM
It was kinda telling you I'd opened a ticket two days ago  :)

As for NH EH I spent 'bout 1/2 hour waiting and cancelled order. But now seems smooth.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AK74XXX on June 29, 2017, 12:48:11 PM
Hexed :(


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: JarBinks on June 29, 2017, 01:17:52 PM
Here is something I have been wondering about.

I rent from NH, lets say x11, and I have the possibility of creating 1 order/miner with 500Ghs.
Is it better to have 1 big order or multiple small orders?

For some of the coins that are on x11 that would be alot of hashing power.

My thought is that a few smaller orders is better because it allows the pool to switch around.
1 big order would be focused on the coins that can handle it, which may not be the most profitable.

I have no facts to support my idea so I thought I would ask you.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 29, 2017, 03:24:17 PM
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AceIsAngry79 on June 29, 2017, 03:33:18 PM
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Any chans to get Dash payouts soon?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 29, 2017, 03:34:05 PM
crackfoo,

Whatever you did for equihash, thank you... i switched my other rigs over to allow equihash.. ive only had 2 disconnects in 11hrs... which both reconnected within 3 tries


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 29, 2017, 03:49:19 PM
crackfoo,

Whatever you did for equihash, thank you... i switched my other rigs over to allow equihash.. ive only had 2 disconnects in 11hrs... which both reconnected within 3 tries

good to hear. ^_^


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 29, 2017, 03:55:58 PM
crackfoo,

Whatever you did for equihash, thank you... i switched my other rigs over to allow equihash.. ive only had 2 disconnects in 11hrs... which both reconnected within 3 tries

good to hear. ^_^

Ya whatever you did increased my speed to your server, i was running in the 40ms ping rate, now im around 15ms to the server...but i have noticed that the last 2 days ping rate on skein port is randomly spiking to the 200-300ms range


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 29, 2017, 04:57:06 PM
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Any chans to get Dash payouts soon?

We just found a DASH block so after that confirms, it should be paid... might make it to payouts later tonight.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AceIsAngry79 on June 29, 2017, 05:52:04 PM
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Any chans to get Dash payouts soon?

We just found a DASH block so after that confirms, it should be paid... might make it to payouts later tonight.

Great News. Thnaks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: AK74XXX on June 29, 2017, 08:08:28 PM
crackfoo, plz, be a good pool master, check my 2 days old support ticket, eh?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 29, 2017, 08:35:37 PM
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Why the change?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 29, 2017, 08:59:08 PM
Is maintenance or connection issues happening? All my mining rigs have disconnected from both mining locations to all algo ports.. i am unable to connect to any algo port for more than a few seconds before being disconnected, ping to ports is over 5000ms....

connection at both sites exceed 100mb, so not isp...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 29, 2017, 11:34:13 PM
Is maintenance or connection issues happening? All my mining rigs have disconnected from both mining locations to all algo ports.. i am unable to connect to any algo port for more than a few seconds before being disconnected, ping to ports is over 5000ms....

connection at both sites exceed 100mb, so not isp...

Not right now no but the chaps blasting yescrypt with a bot net I think are the culprits.

I may just drop yescrypt altogether, it's always been a resource hog at the best of times.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 02:15:35 AM
Pool host: decred.mine.zpool.ca
Pool port: 5744
Pool user:
Pool pass: x
Algorithm: Decred

Resolving pool host decred.mine.zpool.ca... OK
Establishing connection with proxy... OK
Establishing connection with pool 149.56.122.79:5744... OK
Sending mining.subscribe... OK
Sending mining.authorize... OK
Received mining.notify subscription... OK
Received authorization result... OK
Received mining.set_difficulty... OK: difficulty=1
Error: Read timed out
Your pool is shown as incompatible therefore we encourage you to contact pool operator to make sure that the pool is using minimal/starting pool share difficulty which is compatible with our service (and thus compatible with today's miners), please send them link to our FAQ on this topic: https://www.nicehash.com/index.jsp?p=faq#faqb3. Thank you!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: merlinsbeard on June 30, 2017, 02:27:19 AM
Having problem with connecting to blake2s stratum. 'Stratum connection failed: connection refused.'


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 30, 2017, 02:28:36 AM
Is maintenance or connection issues happening? All my mining rigs have disconnected from both mining locations to all algo ports.. i am unable to connect to any algo port for more than a few seconds before being disconnected, ping to ports is over 5000ms....

connection at both sites exceed 100mb, so not isp...

Not right now no but the chaps blasting yescrypt with a bot net I think are the culprits.

I may just drop yescrypt altogether, it's always been a resource hog at the best of times.

i really hope something can be done.. because the lack of ability to connect to your pool is forcing my multi-algo miner to connect to minerpoolhub more and more the last few hours... even with your pool listed at a higher priority... it just cycles through 3 attempts to connect to 11 different algo's, then after 33 attempts it defaults to equihash on minerpoolhub for 60minutes before it attempts again...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 30, 2017, 02:29:53 AM
Having problem with connecting to blake2s stratum. 'Stratum connection failed: connection refused.'

ya im getting connection refused on ALL algo's i mine from zPool


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 02:43:52 AM
Having problem with connecting to blake2s stratum. 'Stratum connection failed: connection refused.'

ya im getting connection refused on ALL algo's i mine from zPool

Same here.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: jwarren81 on June 30, 2017, 03:00:20 AM
Equihash seems to be working.   Blake2s is definately down.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: SharkOne on June 30, 2017, 03:38:51 AM
Most algos down...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 30, 2017, 03:46:58 AM
Most algos down...

Only one I've found is blake2s...equihash, nist5, and skein are up


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: merlinsbeard on June 30, 2017, 03:48:19 AM
Most algos down...

Only one I've found is blake2s...equihash, nist5, and skein are up

Same here. Besides Blake2s, other algos seem to be working.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 03:56:50 AM
Most algos down...

Only one I've found is blake2s...equihash, nist5, and skein are up

Same here. Besides Blake2s, other algos seem to be working.

Blake2s is back online


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 03:58:21 AM
Most algos down...

It was just BLake2s. It really easy to see whats down, just look for which algos have "0" miners...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: merlinsbeard on June 30, 2017, 04:01:49 AM
Most algos down...

Only one I've found is blake2s...equihash, nist5, and skein are up

Same here. Besides Blake2s, other algos seem to be working.

Blake2s is back online

Right when I take blake2s off my rigs haha. Thanks for the update


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: dragon123 on June 30, 2017, 10:25:17 AM
Can you check the last payment made about 3 hours ago, the transaction is not on the blockchain.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 11:06:12 AM
Can you check the last payment made about 3 hours ago, the transaction is not on the blockchain.

What transaction? What's your address?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: dragon123 on June 30, 2017, 11:12:35 AM
My address is 33ar22wW89sxSYE1bX4Z9xjuaT6r5wK4q1.

The transaction is
https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25

Thanks.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: dragonmike on June 30, 2017, 11:18:05 AM
Crackfoo, several algos down again (Nist5, Blake2s...). Please sort out your pool!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: SFR10 on June 30, 2017, 12:49:42 PM
Been noticing unstable connections (few short and long interruptions) for skein algo (since yesterday). Any reason behind this?

Have checked other users that mine skein only and results were the same, so it's not on my side only.

Will experiment with other algos for now...


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: a4si on June 30, 2017, 12:57:19 PM
anybody else seeing transaction not found wiht latest payments cca 5h ago? Still didn't get my BTC despite TX is shown on payouts section. But when I click on it says "transaction not found". Never had issues before... and all past payouts when you click on link work fine.


https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25 (https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 01:09:16 PM
anybody else seeing transaction not found wiht latest payments cca 5h ago? Still didn't get my BTC despite TX is shown on payouts section. But when I click on it says "transaction not found". Never had issues before... and all past payouts when you click on link work fine.


https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25 (https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25)

Same here, not showing up in my wallet either.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: xqicka on June 30, 2017, 01:13:12 PM
wtf with pool?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 30, 2017, 01:15:11 PM
anybody else seeing transaction not found wiht latest payments cca 5h ago? Still didn't get my BTC despite TX is shown on payouts section. But when I click on it says "transaction not found". Never had issues before... and all past payouts when you click on link work fine.


https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25 (https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25)

Same here, not showing up in my wallet either.

same here
https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25
18ahMXxLnxfupYkGyU5DQ8yEX7XpgtnM1A


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 01:43:14 PM
anybody else seeing transaction not found wiht latest payments cca 5h ago? Still didn't get my BTC despite TX is shown on payouts section. But when I click on it says "transaction not found". Never had issues before... and all past payouts when you click on link work fine.


https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25 (https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25)

Same here, not showing up in my wallet either.

same here

looking into this now. Looks like there is some balance discrepencies in the BTC wallet so I'll need to do some maintenance on it.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Oskarza on June 30, 2017, 01:43:53 PM
same not payed  >:(


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: EvilMonkey on June 30, 2017, 02:08:16 PM
Been noticing unstable connections (few short and long interruptions) for skein algo (since yesterday). Any reason behind this?

Have checked other users that mine skein only and results were the same, so it's not on my side only.

Will experiment with other algos for now...

THis is a constant reoccuring bugbear of mine with Zpool.   The graph gets interupted for 1 hour here and then.  Twice last night.   Around 3 weeks ago it was doing it all the time.  We were told it wont effect out payout all our hash still counts.

It was difficult to work it out because of all the price fluctuations but over that period it was down all the time and for long periods and it 100% just made that hash disappear.

Last night it was 2x 1 hourish.  My earning are down around 15-20% per 24 hour period.  I really am trying to stay with zpool every time this happens I leave it for a few weeks then try again.

What is going on?  The week prior to this it was going fine.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 02:20:21 PM
Been noticing unstable connections (few short and long interruptions) for skein algo (since yesterday). Any reason behind this?

Have checked other users that mine skein only and results were the same, so it's not on my side only.

Will experiment with other algos for now...

THis is a constant reoccuring bugbear of mine with Zpool.   The graph gets interupted for 1 hour here and then.  Twice last night.   Around 3 weeks ago it was doing it all the time.  We were told it wont effect out payout all our hash still counts.

It was difficult to work it out because of all the price fluctuations but over that period it was down all the time and for long periods and it 100% just made that hash disappear.

Last night it was 2x 1 hourish.  My earning are down around 15-20% per 24 hour period.  I really am trying to stay with zpool every time this happens I leave it for a few weeks then try again.

What is going on?  The week prior to this it was going fine.

pools are a constant target, zpool isn't an exception. prohashing is/was also battling ddos'ers the past week or two.

things happen but they will get fixed.

thanks


Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Fromage on June 30, 2017, 02:29:22 PM
Not paid either Crackfoo....

1AMQg6m9GPDN9HGuC3wJGpSuiZr1XQXjxi

https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25 (https://blockchain.info/tx/9d7a707289577c688fcc861110d2f930861e02d90217897a80edf93c9c96ce25) was my link on zpool

0.01970157


put me on the list Thanks


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 02:51:05 PM
the failed payout is in my DB, I'll reset the pay for everyone.

Thanks


Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Fromage on June 30, 2017, 03:05:39 PM
the failed payout is in my DB, I'll reset the pay for everyone.

Thanks

Appreciated and Thanks Crackfoo.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 03:16:42 PM
balances should all be re-set now from the failed payment just in time for this payout momentarily.

Also, disabled HashTap for the time being. Until main issues are addressed.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 04:15:55 PM
Looks like every algo is having issues.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 04:31:19 PM
Looks like every algo is having issues.

yup, it got a little messy with mysql, but I did find more things to fix and tune.

here's to smooth sailing from now.

fingers crossed.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on June 30, 2017, 06:44:35 PM
Looks like every algo is having issues.

yup, it got a little messy with mysql, but I did find more things to fix and tune.

here's to smooth sailing from now.

fingers crossed.

Keep up the good work. It's not as easy as everyone thinks.....


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on June 30, 2017, 08:05:07 PM
Looks like every algo is having issues.

yup, it got a little messy with mysql, but I did find more things to fix and tune.

here's to smooth sailing from now.

fingers crossed.

I sure hope sooo.... because with 18 GTX1080ti miners... and deducting the amount from the original payout before the reset.. im looking to only clear $20 worth of BTC today based on current balance total... gonna have to stomach this day as a wash for mining... usually i clear $125+ easily


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Jaerin on June 30, 2017, 08:35:25 PM
Any chance if you could see about adding an API for querying our coins that have been earned through mining?  Might make calculating potential profits easier if we could query the actual coins we've mined.

Right now it is hard to know which algorithms are actually earning the best results for us over time without just trusting the multi-algo and the ever shifting price changes.

Like I notice Doubloons under hmq1725 are currently showing a 0 value unless it is just extremely small.



Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on June 30, 2017, 09:46:30 PM
Any chance if you could see about adding an API for querying our coins that have been earned through mining?  Might make calculating potential profits easier if we could query the actual coins we've mined.

Right now it is hard to know which algorithms are actually earning the best results for us over time without just trusting the multi-algo and the ever shifting price changes.

Like I notice Doubloons under hmq1725 are currently showing a 0 value unless it is just extremely small.



Profits are calculated per algo as a whole.

Nova disabled trading of BOAT for some reason which doesn't really make sense since their wallet is showing in sync. So it's disabled.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 12:05:51 AM
Any chance if you could see about adding an API for querying our coins that have been earned through mining?
I have noticed it's in the Wallet page in Last 50 earnings. The amount of coin you get and the amount of mBTC it costs. Thou not the price. Besides there's no just thing as coin price anyway. There's only Sell Order price when ppl sell Hush, and Cryptopia 'Last price' value should show exactly THAT. And not Buy Order price. Because you won't get it for 0.0008 as I won't sell ya for that price anyway. You'd want 'love Ke$ha very long time' but it doesn't even matter what you want. Because she sells at 0.00099889 BTC as in my sell order and it's not 0.0008. And I've sold me lotta Hush very long time :) Imagine Supadupamart where every client randomly swaps the price of a Nuka Cola bottle. It would become zero in a second. Then a manager tells them HE has the Nuka Cola and not the customers so they should stfu and stop changing the price of a bottle. Something like that


Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Fromage on July 01, 2017, 12:27:04 AM
Nice Bitcore run  :)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 12:36:37 AM
Nice Bitcore run  :)
and remember Bitcore costs 0.00129948 as in Sell order price and not 0.00121101 as some ppl want. And they want Ke$h Ke$sh a lot as in 'Cause we make the hipsters fall in love and they won't get her cheap. Because we got the beat!


Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Fromage on July 01, 2017, 12:51:35 AM
Nice Bitcore run  :)
and remember Bitcore costs 0.00129948 as in Sell order price and not 0.00121101 as some ppl want. And they want Ke$h Ke$sh a lot as in 'Cause we make the hipsters fall in love and they won't get her cheap. Because we got the beat!

Beat away Jack! Chillin,grillin,and fillin


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 01:09:18 AM
Beat away Jack! Chillin,grillin,and fillin
and drilling... still I wonder why Topaz as it ain't worth a dime. Literally
PS Bitcore price skyrocketed +118.21% :o. Looking sick and sexyfied (GGWP) Three o'clock in the morning Here am I Sittin' here so lonely So lonesome I could cry ;D


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on July 01, 2017, 03:33:17 AM
Beat away Jack! Chillin,grillin,and fillin
and drilling... still I wonder why Topaz as it ain't worth a dime. Literally
PS Bitcore price skyrocketed +118.21% :o. Looking sick and sexyfied (GGWP) Three o'clock in the morning Here am I Sittin' here so lonely So lonesome I could cry ;D

we are miners not traders      sooooo throw your shitcoin list over your shoulder add your current good coins to the shitcoin list and lets mine us some shitcoins for profit.


Title: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Fromage on July 01, 2017, 03:37:42 AM
ahahahaha Touche!


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 03:56:22 AM
we are miners not traders      sooooo throw your shitcoin list over your shoulder add your current good coins to the shitcoin list and lets mine us some shitcoins for profit
but zpool was mining me exactly Bitcore for the last 6 hrs or so 8). And a bit of Topaz idk why. It either my luck the price of Bitcore got pumped at the same time or... well yknow what I mean. I just hope it goes for exchange for the right price


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on July 01, 2017, 04:07:50 AM
we are miners not traders      sooooo throw your shitcoin list over your shoulder add your current good coins to the shitcoin list and lets mine us some shitcoins for profit
but zpool was mining me exactly Bitcore for the last 6 hrs or so 8). And a bit of Topaz idk why. It either my luck the price of Bitcore got pumped at the same time or... well yknow what I mean. I just hope it goes for exchange for the right price

zpools server is set up to know what your miner can do.  sooo if some shitcoin that doesnt pay that good drops in dif and makes it worth that much more to get at the time then it will aim your gpu at it and make you more money than the shitcoin you think is worth way more and if you dont understand this commment go back to my last comment and reread it. crakfoo has the software and were just here to make money.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 04:18:13 AM
then it will aim your gpu at it and make you more money than the shitcoin you think is worth way more
that's not what I'm talking about... I'm talking about the server knows the things that would happen several hours later lol. Not that's a time machine I'm talking about :P (@forwarned, forearmed DYI hype)


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on July 01, 2017, 04:20:38 AM
then it will aim your gpu at it and make you more money than the shitcoin you think is worth way more
that's not what I'm talking about... I'm talking abut the server knows the things that would happen several hours later lol. Not that's a time machine I'm talking about :P

no they dont know and that is the side of luck  no one ever knows.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on July 01, 2017, 04:26:20 AM
then it will aim your gpu at it and make you more money than the shitcoin you think is worth way more
that's not what I'm talking about... I'm talking about the server knows the things that would happen several hours later lol. Not that's a time machine I'm talking about :P (@forwarned, forearmed DYI hype)

if you knew the future why were you profit switching?


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 04:31:50 AM
if you knew the future why were you profit switching?
that's if zpool knew it would happen and Bitcore goes skyrocket. That's why we like it. We need moar profit. May the Ke$h be with you
PS still hush, zeek and eth for AMD dual Claymore fanboys seems to be common sight these days. Stable 0.001 per 300 sol or so


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: shotgun1969 on July 01, 2017, 04:46:27 AM
if you knew the future why were you profit switching?
that's if zpool knew it would happen and Bitcore goes skyrocket. That's why we like it. We need moar profit. May the Ke$h be with you
PS still hush, zeek and eth for AMD dual Claymore fanboys seems to be common sight these days. Stable 0.001 per 300 sol or so

some guys have there head stuck so far up there but they cant find really profitable coins to mine.    HUH WIERD


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Storx on July 01, 2017, 04:55:18 AM
Very concerned.... ive only mined 0.00491097 BTC in the last 12 hours since last payout after all the server messing up crap on 18 x 1080ti's........i restarted all the miners before i head to bed to see if maybe that fixes it.. but it concerns me because thats the lowest ive made in 6 weeks in a day.....

https://farm5.staticflickr.com/4287/35473948102_2c85a9077c_o_d.png


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: Renegade1979 on July 01, 2017, 05:01:43 AM
some guys have there head stuck so far up there but they cant find really profitable coins to mine.    HUH WIERD
I guess they just use Whattomine list where Hush is the most exalted one Aaliyah in da house. The rest just read newspapers where they're told Nvidia guys should mine zcache and AMD fanboys should farm Eth. Besides zeek and eth prices are several hundred each. Poor newspaper readers don't even consider the fact they'd get several hundred times less a coin a day on eth or zeek. And Hush sould give them the same 0.001 btc a day in the end. They don't even know about Hush or Whattomine anyway ;)
PS some ppl I know tell me I'm damn wrong and zpool started Bitcore run as soon as its price started to go up so it's no luck or fortune telling at all, just decent monitoring API out there and it does the trick sometimes :) at least it's not us who do the monitoring job 8) Still the fact it got up to +120% instead of +20% was just pure g-d damn luck. We need luck even moar than we need moar Ke$h Ke$h. Tzeench be with you, mortl


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: cashen on July 01, 2017, 09:33:04 AM
Status: Disconnected. Remote pool extranonce size too big (max=16).

Can't use nicehash in decred pool due to error above.


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: whaitukay on July 01, 2017, 11:45:31 AM
SIB showing wrong block reward of 2014.74438777  (2000 too many)... ?

For a moment there thought we might've had another Electra case  ;D

EDIT: Nvm... was fixed very quickly


Title: Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™] The miners multipool >-░▒▓█
Post by: crackfoo on July 01, 2017, 12:33:00 PM