Title: after burner and watttool cannot detect my gpu sensors Post by: pornluver on March 31, 2017, 05:38:22 PM http://s02.imageupper.com/1_t/10/W1490981709533598_1.jpg (http://imageupper.com/i/?S0200010100013W1490981709533598)
I uses asrock BTC However, I connect hdmi to the motherboard's hdmi port instead of to the gpu hdmi port. The result is after burner and watttool is not functioning properly. Some says that I should have put the LCD hdmi on the GPU instead. However, I do not understand why would that make any differences. Title: Re: after burner and watttool cannot detect my gpu sensors Post by: RentGPU on March 31, 2017, 05:41:06 PM http://s02.imageupper.com/1_t/10/W1490981709533598_1.jpg (http://imageupper.com/i/?S0200010100013W1490981709533598) http://s02.imageupper.com/1_t/10/W1490981709533598_2.jpg (http://imageupper.com/i/?S0200010100023W1490981709533598) Disable onboard and connect a monitor to gpu or connect a dummy plug to the card hdmi then problem solved like magic :) , no way to read card data without a monitor or dummy plug connected to gpu.I uses asrock BTC However, I connect hdmi to the motherboard's hdmi port instead of to the gpu hdmi port. The result is after burner and watttool is not functioning properly. Some says that I should have put the LCD hdmi on the GPU instead. However, I do not understand why would that make any differences. Title: Re: after burner and watttool cannot detect my gpu sensors Post by: pornluver on March 31, 2017, 08:44:39 PM http://s02.imageupper.com/1_t/10/W1490981709533598_1.jpg (http://imageupper.com/i/?S0200010100013W1490981709533598) http://s02.imageupper.com/1_t/10/W1490981709533598_2.jpg (http://imageupper.com/i/?S0200010100023W1490981709533598) Disable onboard and connect a monitor to gpu or connect a dummy plug to the card hdmi then problem solved like magic :) , no way to read card data without a monitor or dummy plug connected to gpu.I uses asrock BTC However, I connect hdmi to the motherboard's hdmi port instead of to the gpu hdmi port. The result is after burner and watttool is not functioning properly. Some says that I should have put the LCD hdmi on the GPU instead. However, I do not understand why would that make any differences. And why is that? Also my mining rig have 6 GPU. If I connect LCD to one will watttool be able to read card data on the rest? I also have a normal CPU with 1 GPU. I don't even connect anything. Basically I access the computer via remote desktop. Yet watttool and stuff can do it's job. Title: Re: after burner and watttool cannot detect my gpu sensors Post by: RentGPU on April 01, 2017, 06:43:35 PM http://s02.imageupper.com/1_t/10/W1490981709533598_1.jpg (http://imageupper.com/i/?S0200010100013W1490981709533598) http://s02.imageupper.com/1_t/10/W1490981709533598_2.jpg (http://imageupper.com/i/?S0200010100023W1490981709533598) Disable onboard and connect a monitor to gpu or connect a dummy plug to the card hdmi then problem solved like magic :) , no way to read card data without a monitor or dummy plug connected to gpu.I uses asrock BTC However, I connect hdmi to the motherboard's hdmi port instead of to the gpu hdmi port. The result is after burner and watttool is not functioning properly. Some says that I should have put the LCD hdmi on the GPU instead. However, I do not understand why would that make any differences. And why is that? Also my mining rig have 6 GPU. If I connect LCD to one will watttool be able to read card data on the rest? I also have a normal CPU with 1 GPU. I don't even connect anything. Basically I access the computer via remote desktop. Yet watttool and stuff can do it's job. Title: Re: after burner and watttool cannot detect my gpu sensors Post by: pornluver on April 01, 2017, 08:01:54 PM I did what you say and it works. I wonder why.
However, after that I just remove the hdmi. Guess what? It still works. So like they got to meet TV once. |