|
Title: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: vavetisyan0928 on April 10, 2017, 07:12:48 AM red light is on and when im turning off and then on it is working for about 5 min and then GH/S(RT) is showing 0.00000 and not working any more.
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: allhailthemole on May 02, 2017, 03:42:02 PM Did you find the solution?
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: vm1990 on May 08, 2017, 03:42:01 AM screen shots/ pictures / info more detail the better. this is like going to the garage and saying my car starts and runs for 5 minutes then stops :) more info is always better
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: gamefixer on May 31, 2017, 11:02:16 AM I have the same problem although I'm not sure of the time frame. I see that accepts are still happening and the pool side shows that the miner is hashing so I'm not sure what the deal is.
https://preview.ibb.co/cYCqxa/Screen_Shot_2017_05_31_at_5_58_35_AM.png (https://ibb.co/eDVM3F) Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: adz1922 on October 17, 2017, 12:28:46 PM hope somebody can fix this. the pool is showing lower hash rates already for my s9. only 4TH/s :(
it shouldnt be power supply as it has enough, solo on a single circuit of 20A breaker. internet is stable. good temperature proof: https://imgur.com/a/b7rnv Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: BitcoinboyBlog on October 17, 2017, 01:11:57 PM Is your pool showing low hashrates? If your pool says that is it getting 13 or 14 TH/s, then it doesn't matter what your Antminer says its getting.
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: adz1922 on October 17, 2017, 01:13:23 PM No sir. Its only showing four THs. So meaning the two hashboards really stopped hashing
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: fanatic26 on October 17, 2017, 04:03:43 PM Look in the kernel log, it should tell you why its not hashing on those boards.
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: adz1922 on October 17, 2017, 09:55:30 PM it just came from RMA from Bitmain so it is good.
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: Germs on October 31, 2017, 11:24:56 PM Did you find a solution to this? I'm having the same issue with one of my boards.
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: fanatic26 on November 01, 2017, 03:59:09 PM it just came from RMA from Bitmain so it is good. This doesnt mean anything, I have had bitmain send me plenty of bad 'warrantied' systems Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: adz1922 on November 03, 2017, 01:45:54 PM Fortunately, bitmain sent me a free s9 control board even though i am out of warranty already. thanks to bitmain :)
Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: phapgia on December 23, 2017, 04:45:25 AM Fortunately, bitmain sent me a free s9 control board even though i am out of warranty already. thanks to bitmain :) can you tell me how do you contact with them?? i have same problem now and nees to fix soon :((https://imgur.com/a/838hl Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: castiel0504 on January 17, 2018, 09:12:51 PM Fortunately, bitmain sent me a free s9 control board even though i am out of warranty already. thanks to bitmain :) can you tell me how do you contact with them?? i have same problem now and nees to fix soon :((https://imgur.com/a/838hl Your hashboard probably looks dead.... You can try to heat it up on room temperature, or put it near radiator, and turn it on again. Try to change cables, and turn it on. If nothing doesn't work its probably dead, and you need to send it to bitmain warranty/repair. You can see on their site how to do that. Title: Re: please help on antminer s9 GH/S(RT) is showing 0.0000 Post by: MinerMEDIC on January 18, 2018, 02:38:49 AM Fortunately, bitmain sent me a free s9 control board even though i am out of warranty already. thanks to bitmain :) can you tell me how do you contact with them?? i have same problem now and nees to fix soon :((https://imgur.com/a/838hl |
