Title: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 03:39:20 AM CNC CHNCoin Simple Pool
PPLNS with N set to around 10 blocks worth of shares 1% fee, payout after 120 confirms http://cnc.dontmine.me (http://cnc.dontmine.me) Runs Stratum and Longpolling cgminer -o stratum+tcp://minecnc.dontmine.me:33334 cgminer -o http://minecnc.dontmine.me:38339 Current workserver proxy listing, order of failover is preferred: stratum+tcp://minecnc.dontmine.me:3333 http://minecnc.dontmine.me:38339 http://cnc.dontmine.me:8080 stratum+tcp://minecnc2.dontmine.me:33334 http://minecnc2.dontmine.me:38339 A config example is here: http://cnc.dontmine.me/misc/cgminer.txt (http://cnc.dontmine.me/misc/cgminer.txt) I'll add and remove extra servers as they become necessary or no longer work. All of the work is going to the same exact place, so the shares are all counted together in the same pool. Consider using --queue 0 --expiry 1 and lowering intensity during the fast-blocking phase of CNC to reduce stales New server has DDoS mitigation. We'll see how long it lasts! :) Happy Mining! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 02, 2013, 03:48:24 AM throwing some hashes your way.
Does your auto payout work correctly? Getting about 22% stales on your pool. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: trinsic on May 02, 2013, 03:52:41 AM GW paul21.
Slight spelling error, technically it's CHN Coin, which you've used in the "Getting started" page but the URL to connect is actually cnc.dontmine.me. Change one or the other :) 1% stales compared to 25% on other pools so far. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 503guy on May 02, 2013, 03:54:28 AM Kind of a coin toss with 60sec blocks
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 04:05:55 AM Slight spelling error, technically it's CHN Coin, which you've used in the "Getting started" page but the URL to connect is actually cnc.dontmine.me. Change one or the other :) I changed it to cnc, but is that the right 3 letter code? It'll probably dance around for a few days: CHN CNC CHC? throwing some hashes your way. Does your auto payout work correctly? Getting about 22% stales on your pool. Auto-payout should work, with a valid payout address. You might have to lower your intensity or use queue=0 expiry=1 to reduce stales Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: cannonfodder on May 02, 2013, 04:08:55 AM I changed it to cnc, but is that the right 3 letter code? It'll probably dance around for a few days: CHN CNC CHC? I'm pretty sure it's CNC. And thanks for the pool. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: sikman on May 02, 2013, 04:09:10 AM coool, I've now joined and throwing 1800 - 2000 kH/s your way
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 503guy on May 02, 2013, 04:12:23 AM I pushed 2400 over
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 04:22:35 AM Just fixed a bug with the block notifier so the blocks should be rolling in now (just got 3 in a row) :)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 04:25:06 AM Im giving this a shot!
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: sikman on May 02, 2013, 04:26:48 AM We need more blocks NOW!!
now pushing 2319 kH/s, I can give it more (intensity) but the noise of the fans spinning over 4500rpm gets annoying Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: desert_beagle on May 02, 2013, 04:27:04 AM Amazing. 85Mh/s in couple of minutes.
And difficulty finally hit 1. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: flyingmonkeycrap on May 02, 2013, 04:29:56 AM pushed some cards over....although im getting pretty high stale rate (like 20-50%)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 04:31:00 AM [2013-04-30 12:54:02] HTTP request failed: Empty reply from server
What's the problem... ?:( Ah Nvm! [2013-04-30 12:55:24] Long-polling activated for http://67.162.14.58:38339/LP Wrong port! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 02, 2013, 04:32:41 AM Slight spelling error, technically it's CHN Coin, which you've used in the "Getting started" page but the URL to connect is actually cnc.dontmine.me. Change one or the other :) I changed it to cnc, but is that the right 3 letter code? It'll probably dance around for a few days: CHN CNC CHC? throwing some hashes your way. Does your auto payout work correctly? Getting about 22% stales on your pool. Auto-payout should work, with a valid payout address. You might have to lower your intensity or use queue=0 expiry=1 to reduce stales Yeah auto payout is indeed working. However, I'm sending 2700kh/s+ but it keeps dropping to around 1800 for no reason. The stale issue is on your side. As I don't need to do a thing on http://chn.ub3rl33t.com/ and it was 8% stale(still high) (vs 21% here) but their site is getting overloaded with traffic currently so it's why I switched here.. Hope you can work it out. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: sikman on May 02, 2013, 04:33:24 AM 30min ago there was only 13 miners and I was number 2 for Hash rate, now 49 miners and pushed all the way down to 19 position....
Instead of finding a block every 200-300 its down to anywhere 1-20 much better ;D Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: oroqen on May 02, 2013, 04:35:13 AM nearly 1/4 of all hashing power already! :o
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: KrLos on May 02, 2013, 04:47:31 AM i can't register, don't use your same data of the other pools in here, seems fishy.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 04:49:11 AM i can't register, don't use your same data of the other pools in here, seems fishy. Getting errors or blank screens?Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: KrLos on May 02, 2013, 04:55:22 AM i can't register, don't use your same data of the other pools in here, seems fishy. Getting errors or blank screens?blank screens, no errors, no nothing Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Peleus on May 02, 2013, 04:58:57 AM Yeah having issues signing up as well.
When I try and register and hit submit it simply seems to refresh the page. No error in terms of missing info, etc. Same when I try and log in (on the assumption the rego worked, which may not be true) - it simply refreshes the page and doesn't produce any invalid login error or anything. Not sure if it's because it's running on a non-standard port or what. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:01:32 AM Registration should be fixed now.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:05:31 AM we have 51%+ of the hashrate, let's hack these people :D
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 02, 2013, 05:07:11 AM Registration should be closed.. going to kill the coin with 51% attack!
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:07:46 AM we have 51%+ of the hashrate, let's hack these people :D Haha right, but I'm not certain the pool's reported hash rate is accurate anyway, especially based on the rate of immature blocks. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:08:56 AM Close registration, you should. otherwise, bad things happen will..
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:09:20 AM Registration should be closed.. going to kill the coin with 51% attack! I just added a floating close for 35% Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: KrLos on May 02, 2013, 05:10:09 AM ytou should close now the pool
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:10:16 AM It's already over 35% I think :\
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Random Bit on May 02, 2013, 05:12:04 AM Over 68% now on this pool, should be interesting. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:12:32 AM Seriously, it will kill the coin. So you MUST close pool registration.
Net Hash: 458.13 MH/s Pool Hash: 326.04 MH/s Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:13:58 AM I think someone closed it for me ;D
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:15:30 AM We don't want to kill that coin now do we?
We'd lose all our investment since nobody would buy it anymore.. Now do what is right :) Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:16:47 AM Small DDoS there but it recovered. I have registration closed, but I seriously didn't see 51% jumping on this pool as fast as they did, it's only been open 2 hours.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: hendo420 on May 02, 2013, 05:16:56 AM Everyone is just bouncing from new pool to new pool as they stop working or close.. We need some stable pools here.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: desert_beagle on May 02, 2013, 05:17:53 AM Everybody wanna internet moneyyyy! :D
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:18:10 AM Net Hash: 451.31 MH/s
Pool Hash: 340.58 MH/s It's over 51% again... We need a new pool :( Seriously, if this keeps happening you can all say bye bye to CHN and all you worked for today. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: hendo420 on May 02, 2013, 05:19:33 AM This is the only other, non p2pool, pool that I have found. Its currently set as my backup so don't kill it. lol
http://pool.dillavouws.com/ Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 503guy on May 02, 2013, 05:19:53 AM Net Hash: 451.31 MH/s Pool Hash: 340.58 MH/s It's over 51% again... We need a new pool :( Seriously, if this keeps happening you can all say bye bye to CHN and all you worked for today. Dude, we get it already -- you've said it three times. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:20:38 AM DDoS'd again. Don't trust the pool's hash rate report, it's seriously funky. Look at the immature block count, that's the more telling sign with orphans and stales factored in.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RetardedMonkey on May 02, 2013, 05:20:50 AM Nothing is really working which is why when something 'did' work - everyone hopped on.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:21:06 AM Yeah!
Change to this! http://pool.dillavouws.com/ ^_^ Pool Hash Rate 9.642 Mhash/s Current Total Miners 25 Current Block 36,832 Current Difficulty 1 Last Block Found 0 Gogogogo Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Peleus on May 02, 2013, 05:22:26 AM Dammit missed out on rego because it was broken now because its closed :( help a guy out Paul? (Username peleus if you can reg me, pm password & pin :D)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:22:57 AM Dammit missed out on rego because it was broken now because its closed :( help a guy out Paul? (Username peleus if you can reg me, pm password & pin :D) use this m8 http://pool.dillavouws.com/ Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: KrLos on May 02, 2013, 05:49:21 AM well if chinese people get really involved, this might be a good idea xD
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:49:44 AM Is the pool having issues? I only have less than half the hashrate I had 30 minutes ago :|
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: cannonfodder on May 02, 2013, 05:50:52 AM Is the pool having issues? I only have less than half the hashrate I had 30 minutes ago :| I think so. My hashrate is fluctuating between 1/3 and 1/2. :-\ Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 05:55:32 AM It should just be the reported hash rate, your shares and payout are independent of that number. I tried to redo the calculation, it's based on share rate and it's jumping all over the place with the block rate the way it is.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 05:58:09 AM It wasn't like this before you said you got DDoS'd ... Did you change anything ?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 06:05:01 AM Net Hash: 560.82 MH/s
Pool Hash: 891.42 MH/ Oh.. this is actually pretty funny and very ill-configured=) Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 06:07:11 AM It wasn't like this before you said you got DDoS'd ... Did you change anything ? Yeah, I'm fiddling with the hashrate calculation. The payouts aren't based on the reported hashrate, it's just a diagnostic for you to use but it's hard to use it when the shares get cleared out so fast with blocks coming in so quickly. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 02, 2013, 06:11:59 AM Aye. So even though the website shows my hashrate to be 600 k/hash and my actual hashrate is well over 1000. I still get paid for 1000 k/hash ?:)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 02, 2013, 06:20:19 AM Aye. So even though the website shows my hashrate to be 600 k/hash and my actual hashrate is well over 1000. I still get paid for 1000 k/hash ?:) No matter what the site says is your hashrate.. it come down to shares, that's it. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 06:59:20 AM I've updated the auto-pay to run every 15 minutes and adjusted the threshold to minimum 10 CNC maximum 10,000 CNC to help with fees
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: blastbob on May 02, 2013, 07:20:32 AM good work paul. crazy miners..
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: mrSprinkles on May 02, 2013, 07:30:49 AM Is there a delay in how long it takes for the round estimate to increase at a reasonable amount in accordance with the difficulty? I've been mining for about 15 minutes with 2 MH/s and it says 0.4 CNC, whereas with P2Pool, this produces about 20-30CNC in the same time (after the P2Pool 1 confirmation delay of approximately 10 minutes).
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RetardedMonkey on May 02, 2013, 07:33:57 AM My hashes are all over the place, lots of rejects I think?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 02, 2013, 07:36:34 AM My hashes are all over the place, lots of rejects I think? Very short rounds => not many shares to estimate hash rate on => lots of varianceIs there a delay in how long it takes for the round estimate to increase at a reasonable amount in accordance with the difficulty? I've been mining for about 15 minutes with 2 MH/s and it says 0.4 CNC, whereas with P2Pool, this produces about 20-30CNC in the same time (after the P2Pool 1 confirmation delay of approximately 10 minutes). Check your actual payouts, the round estimate is kind of useless to compare if the round time is drastically different.Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: mrSprinkles on May 02, 2013, 07:38:26 AM Check your actual payouts, the round estimate is kind of useless to compare if the round time is drastically different. Yup, actual payouts have started flowing in. Looks good. My hashrates are still very unsteady, but such is expected mining CNC. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RetardedMonkey on May 02, 2013, 07:55:05 AM Well it says I should get about 5000-6000 per day, so we'll see how much I get in the next 2 hours and average that out and see.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 02, 2013, 05:12:34 PM auto payout seems to have stopped >_<
Edit: Works. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 02, 2013, 08:49:16 PM This still running?
Ub3rl33t seems to have errors and hasn't paid out most of my coins! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: meebs on May 02, 2013, 09:32:58 PM This still running? Ub3rl33t seems to have errors and hasn't paid out most of my coins! wrong pool dude... also Ub3rl33t pool shut down earlier today..... and ya.. the owner didnt actually shut down the back end.... Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 03, 2013, 03:26:19 AM This still running? Ub3rl33t seems to have errors and hasn't paid out most of my coins! we talked in private message, waiting for your reply. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: KrLos on May 03, 2013, 01:44:00 PM what happened with this?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: KrLos on May 04, 2013, 01:46:45 AM this is down, what's going on?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: hendo420 on May 04, 2013, 01:50:03 AM Are Chinese hackers hacking all of the CHNcoin pools? They never seem to stay up for long. This one has been up the longest tho.
My cgminer automatically switched to my backup pool but now I have to wait a few hours till the money starts rolling in again because of how these pools are designed. -.- Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 04, 2013, 08:27:26 AM I can get DDoS protection but I'll have to bump the fee to 2%, the hosting costs considerably more. Any opinions?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 04, 2013, 08:30:03 AM I can get DDoS protection but I'll have to bump the fee to 2%, the hosting costs considerably more. Any opinions? Good idea I think, go for it. Willing to pay 2% to ensure DDOS protected. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 04, 2013, 10:23:19 AM I can get DDoS protection but I'll have to bump the fee to 2%, the hosting costs considerably more. Any opinions? Paul, Happy to do 4% fee if it is up QUICK and effective. Difficulty is low now - if you can add DDoS protection right now - go for it - set the fee high to make sure it pays - and use feathercoin work as a stability template imho. Thanks. Would not be very interested if it took a week to work though. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Frizz23 on May 04, 2013, 11:04:40 AM Hi can you please increase difficulty on your Stratum port? It seems to be fixed at 31. Most FTC pools use 255 now (and FTC network has a much higher difficulty).
Question: I thought the purpose of Stratum was to have flexible difficulty, no? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 04, 2013, 11:13:56 AM I can get DDoS protection but I'll have to bump the fee to 2%, the hosting costs considerably more. Any opinions? Paul, Happy to do 4% fee if it is up QUICK and effective. Difficulty is low now - if you can add DDoS protection right now - go for it - set the fee high to make sure it pays - and use feathercoin work as a stability template imho. Thanks. Would not be very interested if it took a week to work though. 4% is too much, 2% with DDOS protection is a good deal. It needs DDOS protection, downtime is no good but DDOS protection with 2% fee. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 04, 2013, 05:42:01 PM Miners keep throttling off, what is going on?
They run peak for x amount of time and keep throttling back to idle!! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: mercSuey on May 04, 2013, 06:44:01 PM I can get DDoS protection but I'll have to bump the fee to 2%, the hosting costs considerably more. Any opinions? Do iiiittt!!! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: juve4v on May 04, 2013, 07:13:20 PM Could you please send me an email to reset my forgotten password.I requested it already for 3x but got no mail so far..checked spam also.Ty!
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: e521 on May 04, 2013, 07:52:23 PM do 2% and get ddos protection asap please
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: lopheaded on May 04, 2013, 09:03:54 PM A 2-3% fee for any working pool is more than fair... so I vote yes
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: r3animation on May 04, 2013, 09:08:01 PM DDOS protection please.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 04, 2013, 09:08:13 PM Our pools are under attack on an off all day , by different methods too.. its crazy. Paul knows.. you should have it at 3%.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: alxs on May 04, 2013, 09:08:30 PM I keep getting interrupts, disconnects, lost shares and "not responding"
Is that just me? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 04, 2013, 09:40:33 PM joining in the China party migrated from the dontmine.me feather pool. For this China pool, cannot keep connection to stratum, and longpoll started out good (80 Accepted 2 stale on average for my cards) but is now at 158 accepted 118 stale...
asun is hogging all the netwrok bandwidth, and he is almost certainly a bot. Not only has he been #1 on your FTC pool, and now CHN pool, at the same time he was #1 on your FTC pool he was #1 AND #2 on various other pools that I looked at yesterday. I know he is making the pool operator money, but some kind of hashrate limit might should be placed on the guy at a coin difficulty rate that is single digits. He snagging over 50% of my accepted shares. Sorry if this seems out of line, but he is really hurting other miners on the pool IMO. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: xwebnetwork on May 04, 2013, 09:43:24 PM Yeah, I've lost a combined 6000 shares due to disconnects. Please fix this.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 04, 2013, 10:13:16 PM Considering it to not be working, miners are just disconnecting constantly.
Looking elsewhere for now. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 04, 2013, 10:39:21 PM rejects now outnumber accepted on all 6 of my cards :(
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: e521 on May 04, 2013, 10:41:43 PM yes the situation is quite shit, hopefully admin will be able to move the pool in 2-3 hours.
he is very good and skilled, he did a great job on FTC pool I am sure he is doing his best for cnc Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: desert_beagle on May 04, 2013, 11:12:22 PM Does the pool have epilepsy?
Seriously fix the freaking pool man. Constant disconnects. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: ElJay on May 04, 2013, 11:29:17 PM And.. the pool is down..
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Extornia on May 04, 2013, 11:30:10 PM Does the pool have epilepsy? Seriously fix the freaking pool man. Constant disconnects. You moron its not his fault. All of the pools are being DDOS-ed. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: mkmen on May 04, 2013, 11:39:34 PM Does the pool have epilepsy? Seriously fix the freaking pool man. Constant disconnects. You moron its not his fault. All of the pools are being DDOS-ed. Yeah, thank you Paul for your work! Hopefully the DDoS will stop. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: e521 on May 05, 2013, 12:21:13 AM From News on pool website:
----------- 5/4/2013 Update 1: The server has been migrated. The new IP should propagate through DNS but it might take a few hours. The :9999 is no longer necessary, it's just: http://cnc.dontmine.me ----------- I also received a few coins with auto-payout everything is back to normal, hopefully it will last >:( Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 12:40:06 AM going nicely again.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 05, 2013, 12:42:08 AM Okay, everything has migrated to a new server. The hardware is much better, the connection is better, and it has a reverse proxy for DDoS mitigation. I'm currently protected to 1 Gbps, but if the DDoS attacks are larger than that I'll have to up the pool fee to ~2% and buy a more hefty reverse proxy.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Joerii on May 05, 2013, 12:47:26 AM Keep up the good work Paul !
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: garumaru on May 05, 2013, 01:47:16 AM Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 05, 2013, 01:58:40 AM Try --queue 0 --expiry 1 , and lower intensity by one or two. The fast blocking rates are responsible for most of the stales, despite stratum block notifies. I will probably have to increase the share difficulty soon until I can get a vardiff setup running since it's running 1000 shares/second and that's about the limit for my setups to handle. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: koumuu on May 05, 2013, 02:25:34 AM YES
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 05, 2013, 02:29:57 AM ... sending 3000kh/s .. your site is showing 130kh/s ... Help!
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 05, 2013, 05:34:36 AM What is the reason this pool keeps on making my GPU's go from 99% to 0% in cycles? It does like 20 minutes 99% then 0% for 10 minutes, and repeats (sometimes longer on 0%)
Any ideas? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Wolf Rainer on May 05, 2013, 05:36:07 AM Good BYE CNC, Dontmine me is about to get 51%
"Registration has been temporarily closed due to the large hash rate on this server relative to the total hash power of the network. It will reopen when the pool/network hash rate (50.54%) drops below 35% Thank you for your support!" http://cnc.dontmine.me/register Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 05, 2013, 05:42:30 AM Good BYE CNC, Dontmine me is about to get 51% "Registration has been temporarily closed due to the large hash rate on this server relative to the total hash power of the network. It will reopen when the pool/network hash rate (50.54%) drops below 35% Thank you for your support!" http://cnc.dontmine.me/register I've had >51% before actually, on both FTC and CNC, and gotten 6 blocks in a row several times (not that any pool should have 51%). I close registration, but someone has been selling accounts apparently on btc-e. I'm trying to be a good pool citizen here, but it's hard! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 05, 2013, 06:35:41 AM Good BYE CNC, Dontmine me is about to get 51% "Registration has been temporarily closed due to the large hash rate on this server relative to the total hash power of the network. It will reopen when the pool/network hash rate (50.54%) drops below 35% Thank you for your support!" http://cnc.dontmine.me/register I've had >51% before actually, on both FTC and CNC, and gotten 6 blocks in a row several times (not that any pool should have 51%). I close registration, but someone has been selling accounts apparently on btc-e. I'm trying to be a good pool citizen here, but it's hard! Paul, Wish you would combine these pools like Coinotron. I have had ~9000Kh/s pointed at your FTC pool through all the difficulties it had with stratum but stuck with it. It is frustrating not to be able to switch a few of those to CNC because I do not have a separate registration here. :( Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: storm11 on May 05, 2013, 07:12:48 AM for the past few minutes, my miners have reported "Can't create UNIX so". 2 separate computers. Pool issues? It's causing quite a few rejected shares. I had already set queue to 0 and expiry to 1
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: ElJay on May 05, 2013, 07:14:48 AM for the past few minutes, my miners have reported "Can't create UNIX so". 2 separate computers. Pool issues? It's causing quite a few rejected shares. I had already set queue to 0 and expiry to 1 Same here! But atleast the pool is running now ;D Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: erk on May 05, 2013, 07:16:47 AM Getting this mass of errors that say:
Rejected ((2001, "Can't create UNIX so) Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 05, 2013, 07:25:53 AM I increased the file limit but I forgot to restart my session before I opened stratum server, oh well it's bumped now should be good :)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: storm11 on May 05, 2013, 12:09:33 PM issue definitely resolved. looking forward to you increasing the difficulty of submitted shares, still at 10% stale rate despite dropping intensity, queue to 0 and expiry to 1. The high number of miners on the site has affected my shares, 17.5CNC would take an hour to pay out for a couple of hours, then 1hr 15mins, now 1hr 30 mins. Don't know if it is just bad luck, but with the huge number of workers, wouldn't have thought the luck would be that bad....
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: crymo on May 05, 2013, 01:03:03 PM pool is running great, but i have still hugh number of stales 1750/300... trying to lower intensity by 2
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: rikii on May 05, 2013, 01:11:59 PM paul do you still suggest trying "--queue 0 --expiry 1" since you've increased the files size. The blocks are solving so fast often i cant get an accepted share in before the next and it causes both my hash rate and my expected round pay to decrease significantly. Thanks for your input.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: erk on May 05, 2013, 02:10:07 PM Looks like it's over the 51%
Net Hash: 2729.58 MH/s Pool Hash: 1451.5 MH/s Not good. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Mhash pipe on May 05, 2013, 02:14:50 PM Great pool! Now donating 1% :)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 02:29:28 PM Why is everyone concerned about the 51% thing. The khore pool on novacoin has something like 66% and I'm sure coinotron has to have at least 50% of the freicoin hash.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Frizz23 on May 05, 2013, 02:37:52 PM I get timeout while accessing http://cnc.dontmine.me
Is this pool gone? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: erk on May 05, 2013, 02:40:11 PM Why is everyone concerned about the 51% thing. The khore pool on novacoin has something like 66% and I'm sure coinotron has to have at least 50% of the freicoin hash. Have you already forgotten about the 51% attack that BBQCoin had just after launch? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 03:00:37 PM Difficulty just went to 20, any recommended changes for us Paul?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Frizz23 on May 05, 2013, 03:27:17 PM Can you still access the web frontend http://cnc.dontmine.me ?
Seems to be down ..... Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 03:45:05 PM working fine here
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Frizz23 on May 05, 2013, 04:43:40 PM cnc.dontmine.me seems to be most of the time down.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FaT on May 05, 2013, 05:59:18 PM I keep getting Rate limit exceeded messages when I browse the site.. I'm guessing you need more bandwidth?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: crymo on May 05, 2013, 06:18:29 PM very good pool, after lowering intensity to 18 only 2,5% stale. Also no disconections..ty mate
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: rayman on May 05, 2013, 06:59:21 PM Hi,
I have a problem: I was mining for about 10 hours at 2nd May and still not received any reward to my wallet. I was connected with cgminer this way: Quote cgminer.exe --scrypt -o http://cnc.dontmine.me:33334 -u CRnvmTjAa8f616KdU9ShyUkkWarN8X8yaJ -p x So where can I find how many coins I have and how to withdraw them? Did I forget something? Thanks in advance. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 07:40:54 PM pool offline
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 05, 2013, 07:43:37 PM all workers just got knocked offline. No re-connect.
No front-end. I have never seen a new coin attacked so hard. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 05, 2013, 07:48:45 PM Pool has almost 50% share... so it makes sense to be attacked.. but this is getting really annoying between the scam pools and DDOS'd pools its impossible to mine..
Even p2pool don't stay online consistently for a day. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 07:52:07 PM Hi, Rayman did you ever setup an account? This isn't p2pool I have a problem: I was mining for about 10 hours at 2nd May and still not received any reward to my wallet. I was connected with cgminer this way: Quote cgminer.exe --scrypt -o http://cnc.dontmine.me:33334 -u CRnvmTjAa8f616KdU9ShyUkkWarN8X8yaJ -p x So where can I find how many coins I have and how to withdraw them? Did I forget something? Thanks in advance. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: frobley on May 05, 2013, 08:05:10 PM Pool has almost 50% share... so it makes sense to be attacked.. but this is getting really annoying between the scam pools and DDOS'd pools its impossible to mine.. Even p2pool don't stay online consistently for a day. ++1! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 08:06:24 PM Pool is back up
Paul would that DDOS protection that you mentioned before stop these attacks based on what you're seeing/ if so i say go for the 2% fee Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 05, 2013, 08:10:10 PM Pool is back up Paul would that DDOS protection that you mentioned before stop these attacks based on what you're seeing/ if so i say go for the 2% fee People have to understand that DDOS protection is only as good and the bandwidth of the ip provider hosting the server. If the DDOS is bigger than that.. there's nothing that can be done but collect ip addresses and report them to their respective rdns locations. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: jdebunt on May 05, 2013, 08:11:14 PM glad this pool is back, it's the only one paying me so far :)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 08:12:07 PM Pool is back up Paul would that DDOS protection that you mentioned before stop these attacks based on what you're seeing/ if so i say go for the 2% fee People have to understand that DDOS protection is as only as good and the bandwidth of the ip provider hosting the server. If the DDOS is bigger than that.. there's nothing that can be done but collect ip addresses and report them to their respective rdns locations. a few pages back paul had said this I'm currently protected to 1 Gbps, but if the DDoS attacks are larger than that I'll have to up the pool fee to ~2% and buy a more hefty reverse proxy. I was asking if the protection hes talking about would stop the scale of attacks we're seeing. If not, then it probably isn't worth switching if we're just going to see the same result Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: destruct on May 05, 2013, 08:16:59 PM Down again..
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 05, 2013, 08:31:28 PM DDOS Ip addresses:
Code: 200.111.157.242 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Mad_Max on May 05, 2013, 09:00:47 PM And down again. And up again. Anв down right now. Up&down as if the site is doing exercises ;D
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 09:12:50 PM now up and workin'
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 09:22:43 PM now again down. i'm sick of those loosers that have nothing better to do than ddos pool/exchanges....
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 05, 2013, 09:24:47 PM now again down. i'm sick of those loosers that have nothing better to do than ddos pool/exchanges.... They are using their ddos botnet too much..they will loose bots every time and some of the ip's are on networks that will do something about it and have been notified. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: rayman on May 05, 2013, 09:31:11 PM Hi, Rayman did you ever setup an account? This isn't p2pool I have a problem: I was mining for about 10 hours at 2nd May and still not received any reward to my wallet. I was connected with cgminer this way: Quote cgminer.exe --scrypt -o http://cnc.dontmine.me:33334 -u CRnvmTjAa8f616KdU9ShyUkkWarN8X8yaJ -p x So where can I find how many coins I have and how to withdraw them? Did I forget something? Thanks in advance. I didn't. Does the pool remember shares for unregistered login? Is there a way to get those coins? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: r3animation on May 05, 2013, 09:31:36 PM Down. :(
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 09:35:31 PM for those who want to withdraw coins, stay chill ! any pool will return after ddos , your coins are safe. if all are going to withdraw all your coins after the pool is back, you will also increase load on pool...
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 05, 2013, 09:36:46 PM Hi, Rayman did you ever setup an account? This isn't p2pool I have a problem: I was mining for about 10 hours at 2nd May and still not received any reward to my wallet. I was connected with cgminer this way: Quote cgminer.exe --scrypt -o http://cnc.dontmine.me:33334 -u CRnvmTjAa8f616KdU9ShyUkkWarN8X8yaJ -p x So where can I find how many coins I have and how to withdraw them? Did I forget something? Thanks in advance. I didn't. Does the pool remember shares for unregistered login? Is there a way to get those coins? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paladin281978 on May 05, 2013, 09:43:26 PM pool down?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 09:45:14 PM Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 10:10:08 PM up again
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paladin281978 on May 05, 2013, 10:14:02 PM down again
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 10:15:08 PM down again yeah , i'll keep my workers away from this pool until it is steady Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 05, 2013, 10:36:05 PM I really like the way paul runs his pools, since I cant mine here, then I am rewarding his hard work by mining on his FTC pool. This really sucks about CNC though, they are also attacking bter and driving the price way down for CNC there last I looked people were panic selling when it popped back up at .00195...asshole ddossers.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 05, 2013, 10:45:00 PM I really like the way paul runs his pools, since I cant mine here, then I am rewarding his hard work by mining on his FTC pool. This really sucks about CNC though, they are also attacking bter and driving the price way down for CNC there last I looked people were panic selling when it popped back up at .00195...asshole ddossers. that's right... Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 05, 2013, 11:12:13 PM First they ignore you, then they laugh at you, then they fight you, then you win.
There are very angry people who have accumulated only BTC, and think other coins are "stealing their money." We have gotten past ignore and laugh. Seems to be fighting stage. It is everyone who does not want to share - thinks they own rights to cryptocurrency, Chinese not welcome! There are a lot of people who for various reasons want to kill CHNCoin. Please stick with it. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 05, 2013, 11:24:06 PM Hard to stick with it if I cant mine it on any pool. I suppose I COULD buy some on bter at the .00175 current rate, but with everything thats happening, it could go even lower so its too big a risk to buy. I suppose this is how its going to be (or worse) everytime a new coin is introduced and shows signs of being valuable. There's nothing to be done about it though. At least they are leaving feathercoin alone again.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 05, 2013, 11:55:49 PM Be patient. Difficulty will stay low so there will be more opportunity for a longer period.
I am configuring my miners to first look here, then if it is down to switch to backup. I would increase my donation to 5% on top of the fee if you want to put up stronger DDoS services. It is an investment risk though owners would have to weigh. Should owners win they would own the CNC pool market like BTCguild did for BTC. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 06, 2013, 12:55:29 AM Updates?
I know price fell on bter, but there are so many GPUs and interest now the market can sustain several alt-coins running sCrypt hashing algorithms. If pools would work price would go back up. DDoS is destroying confidence that the currency will continue. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 01:13:00 AM Looks like a large DDoS for the past bit, the IP is null routed for the duration of the attack so it will keep coming back online as soon as it stops.
22.14 Gbps , 5,356,064 pps Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 01:33:16 AM Does anyone know any hosts to use? I'm using staminus now and they want about $100/m per Gbit / 0.1M PPS of DDoS protection. I could try black lotus, it's 675/m for 10 Gbit / 6M PPS
Code: Start End Size Rate Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 01:48:26 AM 30% discards is that bad? Or is it high discard rate because of low difficulty? I have 0% rejected efficiency is showing 38%
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 503guy on May 06, 2013, 01:55:46 AM Does anyone know any hosts to use? I'm using staminus now and they want about $100/m per Gbit / 0.1M PPS of DDoS protection. I could try black lotus, it's 675/m for 10 Gbit / 6M PPS Code: Start End Size Rate Amazon EC2 -- scale to size you need. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 503guy on May 06, 2013, 01:57:41 AM 30% discards is that bad? Or is it high discard rate because of low difficulty? I have 0% rejected efficiency is showing 38% It's because of low diff, you'll get that no matter the pool right now. new block, current work discarded, rinse, repeat. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 02:02:55 AM 30% discards is that bad? Or is it high discard rate because of low difficulty? I have 0% rejected efficiency is showing 38% It's because of low diff, you'll get that no matter the pool right now. new block, current work discarded, rinse, repeat. im assuming it doesn't effect mining correct? as low as your rejects or low right? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: md34ma on May 06, 2013, 02:07:16 AM So? they're just going to hit you with higher and higher speed.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 503guy on May 06, 2013, 02:11:08 AM 30% discards is that bad? Or is it high discard rate because of low difficulty? I have 0% rejected efficiency is showing 38% It's because of low diff, you'll get that no matter the pool right now. new block, current work discarded, rinse, repeat. im assuming it doesn't effect mining correct? as low as your rejects or low right? It's work that your doing but not submitting to the pool -- so yes it does affect mining. There's just nothing you can do about it. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 02:12:11 AM 30% discards is that bad? Or is it high discard rate because of low difficulty? I have 0% rejected efficiency is showing 38% It's because of low diff, you'll get that no matter the pool right now. new block, current work discarded, rinse, repeat. im assuming it doesn't effect mining correct? as low as your rejects or low right? It's work that your doing but not submitting to the pool -- so yes it does affect mining. There's just nothing you can do about it. ok thanks pool down? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Joerii on May 06, 2013, 02:22:22 AM Some p2pools are still up. It seems like CGminer is still getting stratum support from this pool, which I don't understand at all....but who cares it's good :)
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 06, 2013, 03:12:40 AM any chance this pool will be fixed and functional while difficulty is low?
i think many would tolerate very high fee if it worked. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 03:50:05 AM I am not sure that he could charge a high enough fee to secure equipment to protect against the level of ddos that is hitting CNC pools like his. It's pretty much only going to be functional when the attackers are done screwing over CNC. To make matters even worse, it seems like they are trollling CNC miners by letting servers come up for a few minutes, so we pull our hashrates away from whatever we were mining in the meantime to switch over to CNC PPLNS pools for around 5 minutes of time before they shut it down again.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: r3animation on May 06, 2013, 03:55:36 AM legit pools seem to be down. the other ones running seem to be quite scammy like technocoma.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 06, 2013, 04:05:16 AM You can be a part of taking this botnet down.. they are being stupid by running it so much which is an opportunity to garner all the participating ip addresses. many of them will reverse lookup to locations that can be emailed or called to report the machine/address doing the udp attacks in this botnet. do your part and add the the reverse lookup and reporting. soon the attack will have no teeth.
https://bitcointalk.org/index.php?topic=196491.0 Code: 200.111.157.242 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 04:09:41 AM Here's my list!
Code: 203.150.231.121 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 06, 2013, 04:22:09 AM Here are some starting at the very bottom and going up the list - anyone can contribute with a WHOIS site - and by sending abuse reports.
208.115.192.78 - network:ID:LSN-BLK-208.115.192.0/18 network:Auth-Area:208.115.192.0/18 network:Network-Name:LSN-208.115.192.0/18 network:IP-Network:208.115.192.0/24 network:IP-Network-Block:208.115.192.0 - 208.115.192.255 network:Organization-Name:LSN Infrastructure network:Tech-Contact;I:abuse@limestonenetworks.com network:Admin-Contact;I:abuse@limestonenetworks.com network:Updated-By:admin@limestonenetworks.com 190.196.130.10 - inetnum: 190.196.128-130.10 status: reallocated owner: FTTH GTD MANQUEHUE ownerid: CL-FGMA-LACNIC responsible: Jorge Andrade Mu�oz address: MONEDA, 920, P11 address: NONE - SANTIAGO - RM country: CL phone: +56 2 4139193 [] 74.63.218.10 - network:IP-Network-Block:74.63.218.8 - 74.63.218.15 network:Organization-Name:Rio Grande Regional Convention Corporation network:Organization-City:Albuquerque network:Organization-State:NM network:Organization-Zip:87199 network:Organization-Country:US network:Tech-Contact;I:abuse@limestonenetworks.com network:Admin-Contact;I:abuse@limestonenetworks.com network:Updated-By:admin@limestonenetworks.com 54.235.112.193 - Amazon.com, Inc. AMAZO-ZIAD2 (NET-54-234-0-0-1) 54.234.0.0 - 54.235.255.255 Amazon Technologies Inc. AMAZON-2011L (NET-54-224-0-0-1) 54.224.0.0 - 54.239.255.255 118.192.46.27 - inetnum: 118.192.0.0 - 118.192.255.255 netname: SANXIN descr: Beijing Sanxin Shidai Co.Ltd descr: 1513 Xinjishu building Beijing link west road, descr: Haidian District, Beijing, PRC country: CN admin-c: SJ1535-AP tech-c: AUTO1-SK status: ASSIGNED NON-PORTABLE mnt-by: MAINT-NET-AP mnt-irt: IRT-NET-AP changed: ip@cnisp.org.cn 20121010 source: APNIC route: 118.192.0.0/16 descr: China Unicom Hebei Province network descr: Addresses from CNNIC country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: abuse@cnc-noc.net 20110322 source: APNIC person: Shi Jianmin nic-hdl: SJ1535-AP address: 65th Haidian xinjishu building 1513 address: Beijing Haidian District North four link west road country: CN phone: +86-10-82888393 fax-no: +86-10-82610575-15131 e-mail: antepc@sina.com mnt-by: MAINT-CNNIC-AP changed: ipas@cnnic.cn 20090513 source: APNIC 42.96.143.98 - inetnum: 42.96.128.0 - 42.96.255.255 netname: ALIBABA-BJ-NET descr: Alibaba (Beijing) Technology Co., Ltd. descr: 9F,Tower A Winterless center,NO.1 West Da Wang Lu, descr: Chaoyang District,Beijing country: CN admin-c: PW270-AP tech-c: PW270-AP status: ALLOCATED PORTABLE mnt-by: MAINT-CNNIC-AP mnt-lower: MAINT-CNNIC-AP mnt-irt: IRT-CNNIC-CN changed: hm-changed@apnic.net 20110311 source: APNIC person: Peter Wang nic-hdl: PW270-AP e-mail: huijun.wanghj@alibaba-inc.com address: No.99 HuaXing Rd. Hangzhou,310099 phone: +86-571-85022088 phone: +86-010-65985220 fax-no: +86-010-65985401 country: CN changed: ipas@cnnic.net.cn 20080115 mnt-by: MAINT-CNNIC-AP source: APNIC Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 06, 2013, 04:28:38 AM I'll get together a short list of some of the biggest ones.. some send out up to 10mbps most of them are below 2mbps and around 1mbps. but theres about 10-30 that are the big players and they are priority,
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: MarKusRomanus on May 06, 2013, 04:35:51 AM The big ones:
Code: 5.9.99.42 - china blah Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: durnkenWiz on May 06, 2013, 05:26:32 AM Are payouts working? Mine seems to be stuck
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: LeftToeCut on May 06, 2013, 05:31:45 AM legit pools seem to be down. the other ones running seem to be quite scammy like technocoma. I beg to differ, mine is not scammy Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: durnkenWiz on May 06, 2013, 05:40:15 AM Are payouts working? Mine seems to be stuck got itTitle: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 05:44:41 AM I've put the web portion online with cloudflare. This means the miner URL will have to change to a different subdomain, minecnc.dontmine.me
I'm trying to get a well priced reverse proxy (for minecraft servers ;)) and the ip for the miners will change if you hard coded that part in. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: r3animation on May 06, 2013, 05:53:17 AM I've put the web portion online with cloudflare. This means the miner URL will have to change to a different subdomain, minecnc.dontmine.me I'm trying to get a well priced reverse proxy (for minecraft servers ;)) and the ip for the miners will change if you hard coded that part in. Is it running at the new subdomain? Can't connect to it yet. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 06:11:03 AM I've put the web portion online with cloudflare. This means the miner URL will have to change to a different subdomain, minecnc.dontmine.me I'm trying to get a well priced reverse proxy (for minecraft servers ;)) and the ip for the miners will change if you hard coded that part in. Thanks for all your hard work paul! I tried mining CNC with different P2Pools, what a damn nightmare that was. Can't wait for your pool to be back up! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 06, 2013, 07:21:46 AM Paul,
Question - when this PPLNS pool went down I had LOTS of unpaid shares, will they be remembered??? Do you need someone who can provide bigger server? My wife is CCIE and secures virtual servers for fortune 1000 companies - they almost never go down. Almost feel to go wake her up, although she would probably not be too happy about my hobby at that point. No way so much would be spent DDoSing for nothing - already on BTC-e. I knew coin would be big!! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 07:33:50 AM All the old shares get paid out, the server isn't actually crashing or anything like that. The network just goes down so it just operates and sends transactions or whatever with the network down, and then when it comes back online it pays everything out of the wallet, etc.
I added some firewall rules, but I'm not sure if this will prevent the IP from being nullrouted or not. Just a reminder, the url cnc.dontmine.me will no longer work for your miners. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Makitaki on May 06, 2013, 07:45:28 AM Just a reminder, the url cnc.dontmine.me will no longer work for your miners. Strange. it's working for my worker right now though I still can't access the site. Should I stop mining? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 06, 2013, 07:46:38 AM All the old shares get paid out, the server isn't actually crashing or anything like that. The network just goes down so it just operates and sends transactions or whatever with the network down, and then when it comes back online it pays everything out of the wallet, etc. I added some firewall rules, but I'm not sure if this will prevent the IP from being nullrouted or not. Just a reminder, the url cnc.dontmine.me will no longer work for your miners. tyvm. :) however even with the changes i still just timeout whether I want to check the front or telling stratum the sub-url. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 06, 2013, 07:47:12 AM Just a reminder, the url cnc.dontmine.me will no longer work for your miners. Strange. it's working for my worker right now though I still can't access the site. Should I stop mining? are u using stratum on the sub? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: aurefos on May 06, 2013, 07:47:49 AM Is there any working url for web currently?
Both cnc.dontmine.me and minecnc.dontmine.me not working for me. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Makitaki on May 06, 2013, 07:50:11 AM Just a reminder, the url cnc.dontmine.me will no longer work for your miners. Strange. it's working for my worker right now though I still can't access the site. Should I stop mining? are u using stratum on the sub? Yes, stratum connection. stratum+tcp://cnc.dontmine.me:33334 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 07:50:50 AM DNS propagation must occur before your web portal will show up. I can't give you the IP for the web bypass or it'll get DDoS'd again sorry :(
You can still mine at the old IP that was cnc.dontmine.me, and payouts will still happen automatically if you can't get to the web interface. You can use 72.8.182.2 in your miner for now, but I'll be adding some proxies to some different IP's so you'll wanna switch to the URL when it starts working. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 06, 2013, 08:20:44 AM Still cannot connect :(
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 06, 2013, 11:53:04 AM minecnc.dontmine.me:38339 offline
frontend timeout :| Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Taxidermista on May 06, 2013, 11:59:10 AM Six hours since my last try and still down.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Izael on May 06, 2013, 12:20:07 PM Can't login to this -> stratum+tcp://minecnc.dontmine.me:33334
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 06, 2013, 12:29:53 PM yes , all down, CNC is ddos'ers corner :(
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Maniac on May 06, 2013, 12:58:11 PM I mined about 4-5 hours ago and it was worked excellent!
Then it was disconnect from pool. Now cant't connect miners (tried getwork and stratum). But I see that other users mining this pool. What I doing wrong? My internet connection is stable. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 06, 2013, 01:01:29 PM i have dns problem : *** UnKnown can't find minecnc.dontmine.me: Non-existent domain
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Maniac on May 06, 2013, 01:05:30 PM What secret action other users doing for connect and mining this?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: r3animation on May 06, 2013, 01:13:02 PM DNS hasn't propagated through the network so I'm still using the old subdomain.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 01:24:09 PM working good again here... hopefully i didn't just jinx it. If anyone is having DNS problems open the cmd prompt(for windows anyways), run, cmd, then type ipconfig /flushdns
And possibly reset router if still having probs Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: erk on May 06, 2013, 01:24:20 PM Ideally what you want during a DDoS event, is a firewall with a deny everything rule as the default, then a white list of of IP addresses that are known to have been used by registered users that you let though. Obviously people that aren't registered will not get through, but that's a small price to pay during such an event.
Some kind of site where you can go to register your IP that can't easily be done by a bot like a captcha with email confirmation as an example, could be set up for new users and people that have a dynamic IP that just changed. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Maniac on May 06, 2013, 01:34:09 PM And possibly reset router if still having probs Yes! I power off and then power on my DSL Modem and mining right started! Thank you! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 06, 2013, 01:38:59 PM i flushed dns on windows, reboot rooter etc, still dns hasn't updated. so now it's working for me with the old chn.dontmine.me:33334
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Co1n on May 06, 2013, 03:40:43 PM http://chn.dontmine.me is UP now
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 03:54:47 PM would appear our work server is under attack, the frontend is up but the pool has no hashrate
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 06, 2013, 03:55:25 PM yes , 0 hashrate
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 03:55:50 PM yep 0 hashrate just went down a minute ago was watching it like a hawk after all the attacks yesterday
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 04:04:10 PM You can access LP through this proxy forwarder (add as a failover to cgminer)
-o http://198.12.12.50:2593 -o http://cnc.dontmine.me:8080 and now -o stratum+tcp://198.12.12.50:2595 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Co1n on May 06, 2013, 04:15:00 PM yu-hu )) 'm mining again
thx Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: docjunior on May 06, 2013, 04:15:35 PM Thank you for your hard work, Paul! (been enjoying your ftc pool over the past few days - heroic effort in getting it to work properly under heavy load!! Appreciated!)
NOw, how do we get rid of all these DDOS attacks? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Co1n on May 06, 2013, 04:18:31 PM stratum down again
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 04:18:46 PM You can access LP through this proxy forwarder (add as a failover to cgminer) -o http://198.12.12.50:2593 -o http://cnc.dontmine.me:8080 and now -o stratum+tcp://198.12.12.50:2595 cant connect to the new stratum addy you listed Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: djcristi on May 06, 2013, 04:19:08 PM it's down again
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: techbytes on May 06, 2013, 04:21:05 PM You can access LP through this proxy forwarder (add as a failover to cgminer) -o http://198.12.12.50:2593 -o http://cnc.dontmine.me:8080 and now -o stratum+tcp://198.12.12.50:2595 cant connect to the new stratum addy you listed This works for me as failover: -o http://cnc.dontmine.me:8080 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 04:23:22 PM You can access LP through this proxy forwarder (add as a failover to cgminer) -o http://198.12.12.50:2593 -o http://cnc.dontmine.me:8080 and now -o stratum+tcp://198.12.12.50:2595 cant connect to the new stratum addy you listed This works for me as failover: -o http://cnc.dontmine.me:8080 Creds Paul! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Makitaki on May 06, 2013, 04:26:15 PM Jeez, it's like a constant fucking war! I've added 3 CNC pools to my bat file, and they disconnect or switch back and forth every 5 minutes. ;D Somebody kill those DDoSers already!
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 04:31:34 PM Jeez, it's like a constant fucking war! I've added 3 CNC pools to my bat file, and they disconnect or switch back and forth every 5 minutes. ;D Somebody kill those DDoSers already! How do you add more pools to the same bat file? Got 3 different files :cTitle: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Makitaki on May 06, 2013, 04:35:39 PM I'm using cgminer. It's very simple and written in the readme file. Just add as many pools as you want:
--scrypt -o stratum+tcp://minecnc.dontmine.me:33334 -u [user] -p [password] -o stratum+tcp://198.12.12.50:2595 -u [user] -p [password] ... and so on. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 06, 2013, 04:38:18 PM None of them work!
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Maniac on May 06, 2013, 04:40:37 PM None of them work! -o http://cnc.dontmine.me:8080 - alive Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 04:44:34 PM Anyone know how to add backup pools using GUIMiner (scrypt version)?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 04:50:13 PM longpoll backup is working really well.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 04:54:14 PM Fulllife if you're using the cgminer one in guiminer, add it to the extra flags field. -o address:port -u username -p password
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: gpudude on May 06, 2013, 05:03:49 PM Fulllife if you're using the cgminer one in guiminer, add it to the extra flags field. -o address:port -u username -p password Some are stratum, some are not... can you just add the stratum before it on the stratum ones? Or does the "Use Stratum" drop down override everything? Thanks Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: 2fast4u on May 06, 2013, 05:10:58 PM Paul, thx for your time.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: far004 on May 06, 2013, 05:12:32 PM Come on guys, we need more hash rate on the pool, it is too low right now.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 05:18:36 PM I have been mining CNC with 1,5Mhash/s for a few hours now. I only got 8 CNC earned in the pool....
Can that be accurate? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Taxidermista on May 06, 2013, 05:20:40 PM I have been mining CNC with 1,5Mhash/s for a few hours now. I only got 8 CNC earned in the pool.... Can that be accurate? Probably, the pool is not working, all the ips fail every few seconds. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: z0rr0 on May 06, 2013, 05:24:18 PM I have been mining CNC with 1,5Mhash/s for a few hours now. I only got 8 CNC earned in the pool.... Can that be accurate? Probably, the pool is not working, all the ips fail every few seconds. cnc.dontmine.me:8080 works fine (no stratum) but pool's hashrate too low, and so we have long rounds for now Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 05:25:22 PM yeah 16 minutes per block is killing me here...hop on
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 05:31:28 PM I have been mining CNC with 1,5Mhash/s for a few hours now. I only got 8 CNC earned in the pool.... Can that be accurate? Probably, the pool is not working, all the ips fail every few seconds. cnc.dontmine.me:8080 works fine (no stratum) but pool's hashrate too low, and so we have long rounds for now Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 05:37:49 PM I'm hopping on 8080 with 5.5gh/sec
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Taxidermista on May 06, 2013, 05:39:34 PM I have been mining CNC with 1,5Mhash/s for a few hours now. I only got 8 CNC earned in the pool.... Can that be accurate? Probably, the pool is not working, all the ips fail every few seconds. cnc.dontmine.me:8080 works fine (no stratum) but pool's hashrate too low, and so we have long rounds for now Thank you. This is a sad joke, I spend more time reconfiguring than mining. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 05:40:39 PM yeah i dropped the stratum one from mine i was losing a ton of shares with it dying and coming back.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 05:42:06 PM will our shares even count with the pool getting ddosd?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 05:42:37 PM they have all throughout the attacks pizza
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 05:45:06 PM Pizza for every1!
How can we get the pool hash to clmib? Will have a 2nd rigg up this week and will aim it to this pool. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 05:49:44 PM they have all throughout the attacks pizza do you guys have auto withdrawals set up? can we even get our shares out? lol Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 05:53:04 PM i've had one successful withdrawal since the attacks started, it was actually during the DDOS while the pool was down a bunch of our older blocks had confirmed. Don't worry too much about it, if there were problems with the pool you'd see a lot more complaints about things other than DDOS
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 05:54:06 PM I have been mining CNC with 1,5Mhash/s for a few hours now. I only got 8 CNC earned in the pool.... Can that be accurate? Probably, the pool is not working, all the ips fail every few seconds. cnc.dontmine.me:8080 works fine (no stratum) but pool's hashrate too low, and so we have long rounds for now Connected and mining now, thanks. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 05:54:32 PM Ok I got all 3 machines up about 5.5Gh/sec hope we can get something out of it.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 05:54:44 PM Fulllife if you're using the cgminer one in guiminer, add it to the extra flags field. -o address:port -u username -p password Thanks, I'll have to test this out later. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 05:55:41 PM Ok I got all 3 machines up about 5.5Gh/sec hope we can get something out of it. You mean Mh/sec right? Otherwise, that's one beast of a setup :). Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 05:58:50 PM Ok I got all 3 machines up about 5.5Gh/sec hope we can get something out of it. You mean Mh/sec right? Otherwise, that's one beast of a setup :). possibly I will check lol, pool is up but I cant log in anyone else having problems logging in? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: garumaru on May 06, 2013, 05:59:18 PM Ok I got all 3 machines up about 5.5Gh/sec hope we can get something out of it. You mean Mh/sec right? Otherwise, that's one beast of a setup :). Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 06:01:05 PM Shares should pay without any issues, as long as my hidden chncoind doesn't get attacked ;-)
Try this, instead of the IP's for the stratum backup: -o stratum+tcp://lb.izserv.com:2595 You should use the primary as minecnc.dontmine.me because that will have the lowest latency. Basically what I'm doing is I have a second IP on a different subnet for my server and I'm using reverse proxies and cloudflare to filter attacks. CloudFlare works with http and longpolling is a HTTP/JSON interface so I can filter it using that. I'm on the free plan right now, so I'm not sure how long the 8080 will be open but protection is a reasonable 200/m. Stratum is just a TCP service and it's a bit harder to protect. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:01:38 PM Ok I got all 3 machines up about 5.5Gh/sec hope we can get something out of it. You mean Mh/sec right? Otherwise, that's one beast of a setup :). yeah mh lol Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:02:43 PM Shares should pay without any issues, as long as my hidden chncoind doesn't get attacked ;-) Try this, instead of the IP's for the stratum backup: -o stratum+tcp://lb.izserv.com:2595 You should use the primary as minecnc.dontmine.me because that will have the lowest latency. Basically what I'm doing is I have a second IP on a different subnet for my server and I'm using reverse proxies and cloudflare to filter attacks. CloudFlare works with http and longpolling is a HTTP/JSON interface so I can filter it using that. I'm on the free plan right now, so I'm not sure how long the 8080 will be open but protection is a reasonable 200/m. Stratum is just a TCP service and it's a bit harder to protect. paul trying to log on but its not working, is this up? or still broken? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 06:05:51 PM login working fine here just logged in and out
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:06:44 PM login working fine here just logged in and out yeah mine wont log in Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 06:07:59 PM login working fine here just logged in and out yeah mine wont log in Probably a cookies problem. Try a different browser and check your pass? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:08:37 PM working now
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 06:10:12 PM getting lots of support now over 500mh...I have dropped from top ten to my rightful position glad to have the help through.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:11:02 PM :8080 just went down I think
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 06:15:45 PM still alive for me,
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 06:16:16 PM still getting accepts under 8080
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:17:24 PM Aright guys set up your pools in this order so we all have the same hash incase of servers going down. This is my order:
"url" : "stratum+tcp://minecnc.dontmine.me:33334", "url" : "http://minecnc.dontmine.me:38339", "url" : "stratum+tcp://lb.izserv.com:2595", "url" : "http://lb.izserv.com:2593", "url" : "http://cnc.dontmine.me:8080", Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:17:54 PM still getting accepts under 8080 im getting off 8080 set up your pools above post Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 06:18:35 PM I don't recommend putting the stratum one first, and paul didn't either, 8080 is working fine for us still
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:20:30 PM I don't recommend putting the stratum one first, and paul didn't either, 8080 is working fine for us still the stratum one is working really well im at 296% effieciency something I haven't been able to achieve on 8080 or the others. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 06:37:21 PM Paul update your thread and post the order we should put our pools in, so we are all on the same page with hashing power.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 06:56:06 PM Fulllife if you're using the cgminer one in guiminer, add it to the extra flags field. -o address:port -u username -p password Some are stratum, some are not... can you just add the stratum before it on the stratum ones? Or does the "Use Stratum" drop down override everything? Thanks When you try to connect to stratum and you have "Use Stratum: No" selected, it will automatically connect to stratum anyway if it's available. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 07:13:01 PM Website down?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 07:22:49 PM Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Taxidermista on May 06, 2013, 07:23:39 PM Website down? It's working for me.Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 07:28:01 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: ofeefee on May 06, 2013, 07:36:27 PM Check pizza's post. Last I checked I was on minecnc successfully. Also do ipconfig /flushdns
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: z0rr0 on May 06, 2013, 07:36:50 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...? yeah stratum worked some time and then seems got down again, switched to cnc.dontmine.me:8080 as it is working welltough time for paul, good luck in fixing up! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 07:39:47 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...? this is the order im running things just so we can all be on the same pools when they go down. "url" : "stratum+tcp://minecnc.dontmine.me:33334", "url" : "http://minecnc.dontmine.me:38339", "url" : "stratum+tcp://lb.izserv.com:2595", "url" : "http://lb.izserv.com:2593", "url" : "http://cnc.dontmine.me:8080", stratum minecnc is still up Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Mad_Max on May 06, 2013, 07:41:16 PM 2 paul21
When you have some spare time between DDOS attacks fix Pool Luck graph on http://cnc.dontmine.me/blocksAuth . "Actual Difficulty" line calculation is wrong: It shows as: (current net diff) * 2^16 / 32 Seems 32 is fixed number in code While right formula is: (current net diff) * 2^16 / (current share diff) (=127 now) Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: z0rr0 on May 06, 2013, 07:52:39 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...? this is the order im running things just so we can all be on the same pools when they go down. "url" : "stratum+tcp://minecnc.dontmine.me:33334", "url" : "http://minecnc.dontmine.me:38339", "url" : "stratum+tcp://lb.izserv.com:2595", "url" : "http://lb.izserv.com:2593", "url" : "http://cnc.dontmine.me:8080", stratum minecnc is still up Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 08:06:44 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...? this is the order im running things just so we can all be on the same pools when they go down. "url" : "stratum+tcp://minecnc.dontmine.me:33334", "url" : "http://minecnc.dontmine.me:38339", "url" : "stratum+tcp://lb.izserv.com:2595", "url" : "http://lb.izserv.com:2593", "url" : "http://cnc.dontmine.me:8080", stratum minecnc is still up Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Mike270 on May 06, 2013, 08:32:27 PM Aright guys set up your pools in this order so we all have the same hash incase of servers going down. This is my order: [...] Thanks pizza, works like a charm. I added my local chinacoin wallet as solo mining fall back should all else fail. But what really drove me nuts was this: I was solo-mining for a whole day without any success, and what happens 10 seconds after I connect to the pool? I GOT A BLOCK - and I don't even have anything from it as I didn't have any of those N shares yet *grrrrr* :-) Kind regards Mike Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Mike270 on May 06, 2013, 08:36:55 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...? this is the order im running things just so we can all be on the same pools when they go down. "url" : "stratum+tcp://minecnc.dontmine.me:33334", "url" : "http://minecnc.dontmine.me:38339", [...] Couldn't see from your previous N posts what miner you are using. If it's cgminer or bfgminer, then make that -o stratum+tcp://minecnc.dontmine.me:33334 -u <your worker> -p <worker-pass> -o http://minecnc.dontmine.me:38339 -u <your worker> -p <worker-pass> ... Kind regards Mike Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: IlbiStarz on May 06, 2013, 09:14:51 PM So what happens to all the shares that I was submitting for the last day to the old address?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 09:35:24 PM Site up but now stratum+tcp://lb.izserv.com:2595 is down...? this is the order im running things just so we can all be on the same pools when they go down. "url" : "stratum+tcp://minecnc.dontmine.me:33334", "url" : "http://minecnc.dontmine.me:38339", [...] Couldn't see from your previous N posts what miner you are using. If it's cgminer or bfgminer, then make that -o stratum+tcp://minecnc.dontmine.me:33334 -u <your worker> -p <worker-pass> -o http://minecnc.dontmine.me:38339 -u <your worker> -p <worker-pass> ... Kind regards Mike Running cg! Thanks bro! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 09:39:22 PM All these URL's go to the same place, they're just proxies. All the shares go to the same place, it is the same actual stratum or LP server.
The preferred IP is going to be minecnc.dontmine.me for both stratum and LP, but it can only survive small DDoS attacks before it gets null routed. The first proxy service is through lb.izserv.com , how has that worked for people? I haven't been able to use it myself so I don't know (my miner is out of action right now). The second proxy service is through cloudflare, but its longpoll/http only. It's probably the most reliable alternative, but I'm not sure how well it would stand up to a direct attack. It will also block some IP's automatically, so you might have to go to the http interface in your browser and clear your IP through captcha or something like that. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 09:54:21 PM Don't know how to do it with a bat file, but this is for your cgminer config if you are using it. replace xx with your credentials, the last pool is a solo pool which you would have to set up to use it.
{ "pools" : [ { "url" : "stratum+tcp://minecnc.dontmine.me:33334", "user" : "xx", "pass" : "xx" }, { "url" : "http://minecnc.dontmine.me:38339", "user" : "xx", "pass" : "xx" }, { "url" : "stratum+tcp://lb.izserv.com:2595", "user" : "xx", "pass" : "xx" }, { "url" : "http://lb.izserv.com:2593", "user" : "xx", "pass" : "xx" }, { "url" : "http://cnc.dontmine.me:8080", "user" : "xx", "pass" : "xx" }, { "url" : "http://localhost:8108", "user" : "xx", "pass" : "xx" } ] Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 09:55:00 PM All these URL's go to the same place, they're just proxies. All the shares go to the same place, it is the same actual stratum or LP server. lb.izserg.com worked a few hours ago. But lost connection and stopped working.The preferred IP is going to be minecnc.dontmine.me for both stratum and LP, but it can only survive small DDoS attacks before it gets null routed. The first proxy service is through lb.izserv.com , how has that worked for people? I haven't been able to use it myself so I don't know (my miner is out of action right now). The second proxy service is through cloudflare, but its longpoll/http only. It's probably the most reliable alternative, but I'm not sure how well it would stand up to a direct attack. It will also block some IP's automatically, so you might have to go to the http interface in your browser and clear your IP through captcha or something like that. Mining on stratum atm, dont know if backup or not... Creds to you Paul! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Frizz23 on May 06, 2013, 10:01:59 PM Pool is very unstable for me.
Lost connection to Stratum a few times. Up and down. Up and down .... Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 10:24:38 PM 8080 down
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: z0rr0 on May 06, 2013, 10:31:31 PM 8080 down really? cnc.dontmine.me:8080 working atmTitle: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: phrozenspite on May 06, 2013, 10:32:00 PM i'm still connected and mining on 8080, its looking like the stratum ones went down, which is why i said its probably good to not have them at the top
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 10:32:20 PM Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 10:44:31 PM I updated some connection info over here:
http://cnc.dontmine.me/gettingstarted (http://cnc.dontmine.me/gettingstarted) http://cnc.dontmine.me/misc/cgminer.txt (http://cnc.dontmine.me/misc/cgminer.txt) I think this is best right now, the lb.izserv.com forwarders don't seem to be holding up well. And if you are connected to the LP on cnc.dontmine.me:8080 and the stratum comes online on the izserv you'll get stratum notifications of new blocks which will keep the stales low. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 06, 2013, 10:47:35 PM I updated some connection info over here: http://cnc.dontmine.me/gettingstarted (http://cnc.dontmine.me/gettingstarted) http://cnc.dontmine.me/misc/cgminer.txt (http://cnc.dontmine.me/misc/cgminer.txt) I think this is best right now, the lb.izserv.com forwarders don't seem to be holding up well. Paul please post all servers on your main thread and edit them so we can easily keep track of it also Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Punkonjunk on May 06, 2013, 11:05:02 PM can't connect to ANYTHING. know why?
2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:02:32] Probing for an alive pool 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:02:33] Pool 3 slow/down or URL or credentials invalid 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] No servers were found that could be used to get work from. 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Please check the details from the list below of the servers you have input 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 0 URL: stratum+tcp://minecnc.dontmine.me:33334 User: nockonpork.3 Password: x 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 1 URL: stratum+tcp://lb.izserv.com:2595 User: dgfgd Password: x 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 2 URL: http://lb.izserv.com:2593 User: dfgdgf Password: x 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 3 URL: http://cnc.dontmine.me:8080 User: fdfg Password: x Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Peleus on May 06, 2013, 11:06:02 PM Giving up on CNC, more trouble than it's worth.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: RHWN on May 06, 2013, 11:11:27 PM Giving up on CNC, more trouble than it's worth. Damn those ddosers :'(Edit: will stop with cnc & go back to FTC on fc.dontmine.me. To much problem for me with the CNC stuff going on. Happy mining errbody! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: billionaire on May 06, 2013, 11:16:24 PM I dunno about not being worth the trouble. Even before the btce pump to .00145, when it was still at .0009, it was still about 60 percent more profitable to mine than ltc.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 06, 2013, 11:18:50 PM can't connect to ANYTHING. know why? 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:02:32] Probing for an alive pool 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:02:33] Pool 3 slow/down or URL or credentials invalid 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] No servers were found that could be used to get work from. 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Please check the details from the list below of the servers you have input 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 0 URL: stratum+tcp://minecnc.dontmine.me:33334 User: nockonpork.3 Password: x 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 1 URL: stratum+tcp://lb.izserv.com:2595 User: dgfgd Password: x 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 2 URL: http://lb.izserv.com:2593 User: dfgdgf Password: x 2013-05-06 18:03:32: Listener for "79bk": [2013-05-06 18:03:32] Pool: 3 URL: http://cnc.dontmine.me:8080 User: fdfg Password: x Your users on the other ones need to match the first one Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: FullLife on May 06, 2013, 11:32:58 PM I'm 95th on top hashrate list, but 28th on top contributors list lol.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 07, 2013, 12:00:56 AM Finally an attack that can be filtered by my first level protection! They quoted me about $2k/month to block the attacks the pool was getting.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 07, 2013, 12:26:41 AM Finally an attack that can be filtered by my first level protection! They quoted me about $2k/month to block the attacks the pool was getting. Everything is working good now with all the failsafe pools, been mining pretty good. Thanks for the work Paul! Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: z0rr0 on May 07, 2013, 01:41:27 AM aaand it's gone...
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: r3animation on May 07, 2013, 02:08:23 AM down again?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 07, 2013, 02:09:47 AM The two proxies through lb.izserv.com were not performing well at all, I recommend removing them from failover at this time. I'm working on some other options.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Kinetic915 on May 07, 2013, 02:45:35 AM ANyone else having difficulty withdrawing ANY cnc from any of the pools? I keep getting a server error when I withdraw.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 07, 2013, 03:00:40 AM ANyone else having difficulty withdrawing ANY cnc from any of the pools? I keep getting a server error when I withdraw. What address are you using?I've added a new forwarder: stratum+tcp://minecnc2.dontmine.me:33334 http://minecnc2.dontmine.me:38339 Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Kinetic915 on May 07, 2013, 03:08:18 AM maybe its something im doing wrong. I set up a ltc wallet to collect cnc right? I may be wrong, is there a client specifically for cnc? as i havent seemed to find one googling.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 07, 2013, 03:09:39 AM maybe its something im doing wrong. I set up a ltc wallet to collect cnc right? I may be wrong, is there a client specifically for cnc? as i havent seemed to find one googling. Yeah you have to use a CNC wallet. You can just go to btc-e and use the CNC address there if you want to get your coins to trade, or if you trust btc-e you can hold them there.Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Kinetic915 on May 07, 2013, 03:13:36 AM maybe its something im doing wrong. I set up a ltc wallet to collect cnc right? I may be wrong, is there a client specifically for cnc? as i havent seemed to find one googling. Yeah you have to use a CNC wallet. You can just go to btc-e and use the CNC address there if you want to get your coins to trade, or if you trust btc-e you can hold them there.ah alright. I don't particularly haha. Is there a cnc wallet? do you happen to have the link offhand? if not ill just send to btce Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 07, 2013, 03:18:26 AM maybe its something im doing wrong. I set up a ltc wallet to collect cnc right? I may be wrong, is there a client specifically for cnc? as i havent seemed to find one googling. Yeah you have to use a CNC wallet. You can just go to btc-e and use the CNC address there if you want to get your coins to trade, or if you trust btc-e you can hold them there.ah alright. I don't particularly haha. Is there a cnc wallet? do you happen to have the link offhand? if not ill just send to btce Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 07, 2013, 03:52:18 AM Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 08, 2013, 03:08:41 AM I pointed a few back this way earlier - I look and see a whole lot of unpaid shares, and nothing credited. Been maybe 5 hours?
Does the site need a manual payout script run? Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 08, 2013, 03:14:53 AM I pointed a few back this way earlier - I look and see a whole lot of unpaid shares, and nothing credited. Been maybe 5 hours? Does the site need a manual payout script run? Payout is after 120 confirms, in the last 5 hours none of the blocks you earned shares on have been confirmed. The blocking rate for CNC is currently one block every 3 minutes or so, so 120 confirms takes 6 hours :( Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Frizz23 on May 08, 2013, 01:56:35 PM I mined for 15 hours with 4000kH/s on your pool and only got 50 CNC. Should be more like 100 CNC.
I haven't even been credited for blocks that I found myself and that are confirmed, like this one here: Code: 55,611 Confirmed! Frizz23 2013-05-07 05:59:21 AM 24,232 The "Payout / Transaction Log" shows nothing between 2013-05-07 18:58:48 and 2013-05-08 06:25:03. I mean at least the above block (55,611) should be there, right? Code: ... Please advise. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: vdragon on May 08, 2013, 08:56:07 PM I suppose the miner speeds are not correct due to high diff on shares? Its jumpping all over
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: Mad_Max on May 08, 2013, 11:42:50 PM 2 paul21
When there is a little more spare time fix broken links to blocks on all stats pages. Now links like http://84.200.84.76:5000/chain/Feathercoin http://84.200.84.76:5000/block/b800f49ca6998e9e7f000e19ec24712f32cb18e73b1716c5f792f0d0a4964626 Seems it copy from Feathercoin pool and in addintion this server not working (at least for me all last days). For example http://www.cryptocoinexplorer.com/ has info for CTC and FTC blocks chains and works well. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: ofeefee on May 10, 2013, 02:18:28 AM Payouts being delayed? No it enough running client? Someone trying to kill off cnc?
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 10, 2013, 05:33:53 AM I mined for 15 hours with 4000kH/s on your pool and only got 50 CNC. Should be more like 100 CNC. I haven't even been credited for blocks that I found myself and that are confirmed, like this one here: Code: 55,611 Confirmed! Frizz23 2013-05-07 05:59:21 AM 24,232 The "Payout / Transaction Log" shows nothing between 2013-05-07 18:58:48 and 2013-05-08 06:25:03. I mean at least the above block (55,611) should be there, right? Sometimes the block payer doesn't work right but I catch them up daily. 2 paul21 When there is a little more spare time fix broken links to blocks on all stats pages. Now links like http://84.200.84.76:5000/chain/Feathercoin http://84.200.84.76:5000/block/b800f49ca6998e9e7f000e19ec24712f32cb18e73b1716c5f792f0d0a4964626 Seems it copy from Feathercoin pool and in addintion this server not working (at least for me all last days). For example http://www.cryptocoinexplorer.com/ has info for CTC and FTC blocks chains and works well. Thanks, I fixed this at the CNC side. I suppose the miner speeds are not correct due to high diff on shares? Its jumpping all over Yeah the variance is a problem with the current share difficulty. I tried more time average but it didn't seem to help very much. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: peacefulmind on May 10, 2013, 05:38:25 AM I assigned miners to this pool on a semi-permanent basis - I see no payout or transactions for about 3 hours on found blocks.
Again have built up a huge number of unpaid shares and it certainly is not due to waiting for 120 confirms - what is going on - the site is treating me like a new miner here? Thanks. :) Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: pizza on May 10, 2013, 06:44:24 AM Paul can you check unpaid shares I'm at about 24K. What happened to everyone else on the pool? I jumped up to the 6th spot from like 13th.
Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: paul21 on May 10, 2013, 07:16:54 AM Paul can you check unpaid shares I'm at about 24K. What happened to everyone else on the pool? I jumped up to the 6th spot from like 13th. Profit went down.I assigned miners to this pool on a semi-permanent basis - I see no payout or transactions for about 3 hours on found blocks. Again have built up a huge number of unpaid shares and it certainly is not due to waiting for 120 confirms - what is going on - the site is treating me like a new miner here? Thanks. :) I sent you a PM. Also note that the unpaid share total is 1050k, and if you're mining with 1.5 MH/s you should have about 10k unpaid shares that won't pay for 10 hours. Title: Re: [ANN][CNC][1% Fee] CNC Simple Pool [LP/Stratum] Post by: rayman on May 11, 2013, 01:16:17 PM I would like to publicly thank to paul21 for his help with retrieving my lost coins from mining.
He is legit, fair and helpfull. Thank you for your services! |