Bitcoin Forum

Hi, I just want to create this topic specifically for GTX 1070 owners.

What is your hashrate? What settings are you using? TDP?

I will start with mine system:

[Card]: 1x Gigabyte GeForce® GTX 1070 WINDFORCE 8G
[TDP]: 80%
[Core]: +180
[Memory]: +280
[Fan speed]: 56%
[Temp.]: 56C
[Whole system]: 180W
[Mining performance]: 460-470 sol/s zcash
[Miner]: EWBF's CUDA Zcash miner 0.3.4b

Share your settings! We all together can find the best settings! :D

Answer template (you don't have to use this):

[Card]:
[TDP]:
[Core]:
[Memory]:
[Fan speed]:
[Temp.]:
[Whole system]:
[Mining performance]:
[Miner]:

I have a 6 card setup, but per card...

[COIN] ETH
[Card]: EVGA GeForce NVidia GTX 1070 FTW 8GB
[TDP]: 71%
[Core]: 1974 Mhz (-30Mhz)
[Memory]: 4374Mhz (+575Mhz)
[Fan speed]: 82%
[Temp.]: 42c
[Whole system]: 926w
[Mining performance]: 30.5Mh/s on ETH
[Miner]: Claymore Dual Miner Single Mode Ethereum Only
Total Performance for 6 GPU: 181Mh/s

[COIN] ZEC
[Card]: EVGA GeForce NVidia GTX 1070 FTW 8GB
[TDP]: 85%
[Core]: 1974 Mhz (-30Mhz)
[Memory]: 4374Mhz (+575Mhz)
[Fan speed]: 82%
[Temp.]: 58c
[Whole system]: 1185w
[Mining performance]: 480H/s on ZEC
[Miner]: EWBF's CUDA Zcash miner 0.3.4b
Total Performance for 6 GPU: 2880H/s

[Card]: Zotac GTX 1070 8gb Mini
[TDP]: 95%
[Core]: +200
[Memory]: +700
[Fan speed]: Auto
[Temp.]: 62-64
===
[Mining performance]: 30.3 eth + 300 siacoin (dual)
[Miner]: Claymore 9.6
===
[Mining performance]: ~460 zec
[Miner]: EWBF 0.3.4b

[Card]: Asus 1070 OC dual (4 cards)
[TDP]: 70%
[Core]: +100
[Memory]: +600
[Fan speed]: auto (stays about 50%)
[Temp.]: 66C
[Mining performance]: 30 Mh/s ETH only stable (does poor with dual sia drops to 25-27, increasing power crashes after several hrs)
[Miner]: Claymore 9.5

[Card]: Gigabyte 1070 Gaming G1 (2 cards)
[TDP]: 70%
[Core]: +100
[Memory]: +700
[Fan speed]: auto (stays about 50%)
[Temp.]: 60C, 66C
[Mining performance]: 30.5 Mh/s ETH + 500 Sia
[Miner]: Claymore 9.5

[Whole system]: 179Mh/s + 1000 sia

[Card]: EVGA 1070 https://www.evga.com/Products/Product.aspx?pn=08G-P4-6276-KR (https://www.evga.com/Products/Product.aspx?pn=08G-P4-6276-KR): Test 1
[TDP]: 50%, 93 watts
[Core]: 0
[Memory]: +777
[Fan speed]: 70%
[Temp.]: 45C
[Mining performance]: 31 ETH only mining mode
[Miner]: Claymore 9.5

I can't reduce the power to less than 93 watts, so it means this is it. I increased the memory to the max 1000 and that resulted an amazing crash, so I then reduced the memory at intervals of -10 and it kept crashing, at memory +920 it worked and so far has been stable for few hours, memory at +777 for 24/7 should be okay. Maximum I got at +920 was ETH 31.9 ~ 32.2 mh/s.

[Card]: EVGA 1070 https://www.evga.com/Products/Product.aspx?pn=08G-P4-6276-KR (https://www.evga.com/Products/Product.aspx?pn=08G-P4-6276-KR): Test 2
[TDP]: 50%, 93 watts
[Core]: 0
[Memory]: +920
[Fan speed]: 70%
[Temp.]: 45C
[Mining performance]: 32.2 ETH only mining mode
[Miner]: Claymore 9.5

It was funny, first time I tested my 1070 gaming card on eth, now back to gaming and only gaming.

Anyone with KFA2 GTX 1070 version that can provide the information? Thanks!

[ZEC]
[Card]: MSI GTX 1070 Gaming X 8G
[TDP]: 65% (~ 150W per card)
[Core]: +100
[Memory]: +500
[Fan speed]: 60-70%
[Temp.]: 55-62 °C
[Whole system]: 980W (6 Card Rig)
[Mining performance]: 2800-2850 Sol/s
[Miner]: EWBF 0.3.4b


[ETH]
[Card]: MSI GTX 1070 Gaming X 8G
[TDP]: 55% (~ 110-120W per card)
[Core]: -200
[Memory]: +500
[Fan speed]: 60-70%
[Temp.]: 52-58 °C
[Whole system]: 820W (6 Card Rig)
[Mining performance]:  175-180 MH/s
[Miner]: Claymore 9.5

I have the same question that has this gpu model?

[Card]: Zotac GTX 1070 AMP! Extreme Edition
[TDP]: 85%
[Core]: +110 (2076)
[Memory]: +750 (9296)
[Fan speed]: 60%
[Temp.]: 56°C
[Whole system]: 262w (212w card only)
[Mining performance]: Ethash 30.3 MHs + Sia 705 MHs / Ethash 30.3 MHs + Decred 700 MHs / Ethash 30.3 MHs + Pascal 435 MHs / Ethash 30.3 MHs + Lbry 35.2 MHs
[Miner]: Claymore 9.6

[Card]: Zotac GTX 1070 AMP! Extreme Edition
[TDP]: 90%
[Core]: +110 (2100)
[Memory]: +750 (9296)
[Fan speed]: 50%
[Temp.]: 56°C
[Whole system]: 250w (199w card only)
[Mining performance]: Equihash 510 - 520 Sols
[Miner]: EWBF 0.3.4b

[Card]: Zotac GTX 1070 AMP! Extreme Edition
[TDP]: 80%
[Core]: +130 (2126)
[Memory]: 0 (7796)
[Fan speed]: 60%
[Temp.]: 57°C
[Whole system]: 254w (204w card only)
[Mining performance]: Skein 595 MHs
[Miner]: ccminerAlexis78

This is maximum what i can do with power consumption on Zotac GTX 1070 AMP! Extreme Edition https://ibb.co/bK5Nk5

[Card]:palit 1070 super jet stream
[TDP]: 80%
[Core]: +150
[Memory]: -502
[Fan speed]: 40%
[Temp.]: 60°
[Whole system]: 800watt
[Mining performance]: 9MH
[Miner]: spreadminer

i like spreadcoin to mine now, it's profitable more than the whattomine coin, also nexuscoin is good to mine

I get 150mh eth with 6x 1060 3gb with 525w to the wall....

Which program are you using to configure your EVGA 1070?

I have the same product and those values are amazing, specially the TDP.

Afterburner. Well, there is no trick here, maybe is the silicon, the only thing I hate on this card is that it requires 2 x 8 power pin to function. I tried using only 1 x 8 pin but it would not function, windows 10 64x issued code 43. You need to have a PSU with many 8 pins power cables. By the way, the 93 watts value is static at HWiNFO64, I did not test the power at wall yet, I will post today or tomorrow.

check out the Cooler Master v1200 - it has 12 x 6+2 pin connectors so you can cover 6 GPU's with 8+8.

Yeah, it has to be a very few selected psu's to handle these cards. I myself think, the V1200 is overkill for 6 of these. I mean if each card pulls around 110w, total power will be around 750w. So in this case very few 1000w come with 12 or more, need to have spare cables. The idea is, minimum 6 pci-e cables with 2 x 8 pin, most 1000w brands only include 4 pci-e cables with 2 x 8 pin and 2 more single 8 pin cable..

Well its the same program i'm using maybe my psu's are garbage.

That 2 x 8 pin it's a pain in the ass, because of that i'm using 3 psu's for a 7x rig, I know its overkill but its just for a while...

I'm using an old hx 750w corsair hard to say if is or if isn't. The card / system is very stable, actually, too stable, AMD cards are never stable like this.

Hello, what version of driver you used?

Hello

I bring my stone to the building

http://nsa37.casimages.com/img/2017/07/05/170705055138907615.jpg (http://www.casimages.com/i/170705055138907615.jpg.html)

@matmator what model of 1070 you have? I'm curious, because I can only bump clock for 100mhz, any further and miner starts crashing.

KFA2

 Philma had some of the Katana's mentioned in his 4'th thread - is that the ones you're looking for?

Does anyone know any OC settings for best performances of my PNY GeForce GTX 1070 XLR8 OC GAMING 8GB?

hi have 6x asus gtx 1070 turbo blowers

max rate on eth around 130-135 with slight overclock, 80 tdp.

zec around 2100 sols easy with slight oc.

heat is the killer i run at around 76 degrees, but i am in for long game not too fussed on oc, not sure on power will have to check.

OC depends very on your specific card.

For ETH i would put Core Clock down by 200 or 250, Memory Clock up in 50 Steps starting with +200 (with my card i can go easy do +500).
TDP i would limit that Voltage is ~ 0.950 - that keeps also temperature of the card lower.
For ZEC and other similar currencies go with Core Clock in 25 Steps up (mine runs at +100) and for Memory Clock the same. TDP again that voltage runs ~ 0.950.

I get on ETH 29.5 MH/s with 55% TDP, -250 Core Clock and +500 Memory Clock (but the MSI GTX 1070 Gaming X 8g has high TDP  and high basic values for Core and Memory already)
For ZEC i get 470 MH/s with 65% TDP, +100 Core Clock and +500 Memory Clock.

Which 1070 card do you prefer 1070 ftw or 1070sc2 ?

So I finally managed to find some good and stable settings for my 1070 GPU. Here are the details:

[Card]:1x PNY GeForce GTX 1070 XLR8 OC GAMING 8GB
[TDP]: 70%
[Core]: 0
[Memory]: +615
[Fan speed]: 60%
[Temp.]: 48-52C
[Whole system]: don't know, I guess around 140-150.
[Mining performance]: 31.2mh/s on Ethereum
[Miner]: Claymore 9.7 (Windows 10 65 bit)

We have different brand of cards ;

Msi armor 1070 : 31.5 with new 9.7 Claymore
Zotac 1070 AMP! : 31.5 with new 9.7 Claymore
Evga 1070 FTW : 31.5 with new 9.7 Claymore

Maybe i can push harder but i do not want to.

i have 3 x 1070

EVGA
ASUS
AORUS

all 3 does ~31.8 @ 85% power +650 memory clock Eth hash only 
~29.5 dual mining decred with claymore at -dcri 50

To be precisely the EVGA does a tiny more than other 2 but since it has only 1 fan it runs 12º hotter

 

Hi,

I got a 8 x GTX 1070 rig but i feel is not fully getting good peformance for EBWF.
So need some help on OC for my cards...

Below are my current setting:-

[Card]:Zotac GTX 1070 Mini 8Gb
[TDP]: 80%
[Core]: +125
[Memory]: +500
[Fan speed]: 62% to 69%
[Temp.]: 63C to 69C
[Whole system]: 1150w
[Mining performance]: 30.5 mh/s on Ethereum and 380 - 415 solns
[Miner]: Nicehash Miner Legacy (using EBWF & Claymore)

I check all VRAM are Micron.


Rgds
Vicki

WOW, I only get 26 MH/s in eth mode, maybe I must to overclock in order to get extra MH

[Card]: GIGABYTE Windforce OC GTX 1070 8gb
[TDP]: 65%
[Core]: 0
[Memory]: +600
[Fan speed]: user defined - based on temperature
[Temp.]: 50-55C
[Whole system]: 780-800 Watt (6 cards)
[Mining performance]: 30.5 - 30.7 Mh/s ETH // 305-308 Mh/s SIA
[Miner]: Claymore 9.8 (Win 10 x64, build 14393)

[Card]: MSI GeForce OC GTX 1070 8gb
[TDP]: 61%
[Core]: +150
[Memory]: +600
[Fan speed]: user defined - based on temperature
[Temp.]: 60-68C
[Whole system]: 900-950 Watt (7 cards)
[Mining performance]: 30.8-31.1 Mh/s ETH // 307-310 Mh/s SIA
[Miner]: Claymore 9.8 (Win 10 x64, build 14393)

[Card]: Gigabyte 1070 Gaming
[TDP]: 70%
[Core]: +150
[Memory]: +650
[Fan speed]: 70%
[Temp.]: 61C
[Mining performance]: 33 Mh/s ETH
[Miner]: Claymore 9.7

[Card]: Zotac GTX 1070
[TDP]: 85%
[Core]: -30
[Memory]: +740
[Fan speed]: 65%
[Temp.]: 68C
[Mining performance]: 31.2 Mh/s ETH
[Miner]: Claymore 10.0

Memory Micron

[Card]: GTX 1070 all Micron memory  :(
[TDP]: 90%
[Core]: +150
[Memory]: +740
[Fan speed]: 90%
[Temp.]: 65C
[Mining performance]: 32 Mh/s ETH
[Miner]: ethminer 0.12

[Card]: GTX 1070
[TDP]: 80%
[Core]: -200
[Memory]: +666
[Fan speed]: 76%
[Temp.]: 61C
[Mining performance]: 31 Mh/s ETH
[Miner]: ----

this thread doesn't make sense to me lol, why mining ETH with a 1070? that is a waste better to mine equihash nvidia is very good on equihash or other algo like skein do a better comparison on those algo instead

[Card]: GTX 1070 KFA2 EX OC - Micron
[TDP]: 60%
[Core]: -200
[Memory]: +1000
[Fan speed]: 75%
[Temp.]:
[Mining performance]: 34.1 Mh/s ETH  :o
[Miner]: eth - win10

[Card]: GTX 1070 MSI Gaming X - Micron
[TDP]: 160Watt
[Core]: 135
[Memory]: +500
[Fan speed]: 75%
[Temp.]:
[Mining performance]: 475 Sol zcash
[Miner]: ewbf - nvoc

It's coz it can mine with better power efficiency.  They can do 30 Mh/s @ 60% power.

Here's mine.  32.3 MH/s EVGA Gtx 1070 SC (Micron)

core: +0
mem: + 750
power: 65%

Can somebody help

i have 10 GTX 1070 G1 Gaming

i can't find a good OC for Zcash

i am on Simple mining thank you all

Nice thread. Just started hasing with my 1070 as well. Sharing my specs below:

[Card]: PALIT GTX 1070 Dual Fan
[TDP]: 100
[Core]: +0
[Memory]: +600
[Fan speed]: 65%
[Temp.]: 62
[Whole system]: ?
[Mining performance]: 31.0MH mining ETH
[Miner]: Claymore's dual ETH

[Card]:Asus GTX 1070 reference
[TDP]: 100
[Core]: +120
[Memory]:+598
[Fan speed]:81
[Temp.]:63
[Whole system]:mortis
[Mining performance]:460sol/s ------------ 31mh/s
[Miner]:--------- EBWF zecminer----Claymore ethminer

[Card]:Asus GTX 1070 Dual OC 8GB
[TDP]: 90
[Core]: +135
[Memory]:+550
[Fan speed]:70
[Temp.]:68
[OS]: Window 10 update 1709
[Mining performance]:440sol/s
[Miner]: EWBF

Thanks! I used these settings and now getting 31.1 consistently..

I'm a mining newb. I just got my rig working. Can someone tell me what [TDP] stands for?  thanks!

What they mentioned here is power limit I think. Actually TDP is varied among GPUs, but it mostly stand for maximum power draw.

Btw, my setting and performances:

[Card]:MSI GTX 1070 Seahawk
Power limit: 75%
[Core]: +50
[Memory]:+40
[Fan speed]:Auto
[Temp.]: 62
[OS]: Window 10 Fall Creator ver.1709

Ethash algorithm:
[Average Hashrate]: ~30.5Mh/s
[Miner]: Claymore's dual miner

Equihash algorithm:
[Average Hashrate]: ~442sol/s
[Miner]: EWBF

Lyra2re2v2 algorithm:
[Average Hashrate]: ~32.5Mh/s
[Miner]: Tpruvot Ccminer ver.2.2.2

Neoscrypt algorithm:
[Average Hashrate]: ~890kh/s
[Miner]: Tpruvot Ccminer ver.2.2.2

cool micron +750. i was not able with my asus dual oc 1070 gpus get more that +600 .

For some reason the Micron's didn't like the OC in 6xx range during mining.  Try 750 on yours if it works for you.  Btw None of the settings above +600 are good for 2D/3D loads, even normal web browsing.  Only good during mining.

Gigabyte GTX 1070 Windforce 8GB OC
Power limit: 80%
[Core]: +0
[Memory]:+700
[Fan speed]:Auto
[Temp.]: 58
Hash rate: 24.1 mh/s

What am I missing ? Thanks

Hello,

Gigabyte GTX 1070 Windforce 8GB (GV-N1070WF2-8GO v2.0), Last Build 1709, last driver nvidia January 2018.
Bios version : 86.04.50.40.5E
Hash rate: 13 mh/s ...

what am i missing ?
If you have any advices/informations related to this card it will be appreciated that you share it.

Thanks,

Increase your pagefile size
Increase mem clock

what memory type?

Increase your pagefile size
Increase mem clock
[/quote]

I have already done it...i have 4 cards and then i put min 8000Mo and Max 24000
What do you think of it ?
Btw, it didn't fix my issue...

Pretty easy you need to flash the card...because gigabyte are so bad with V2.0....
https://www.reddit.com/r/EtherMining/comments/7qux83/only_13mhs_with_gtx1070_out_of_the/

Asus Strix GTX 1070 8GB
Power limit: 85%
[Core]: +130
[Memory]:+750 (micron memory)
[Fan speed]:Auto (usally below 40% or idling) due to low temperature in the enviroment
[Temp.]: 54
Hash rate: 430 sol/s (equihash)
Efficiency: 3,36 sol/wat

I could go to around 4,1 sol/w with lower TDP but I aim more at the maximizing the sols than energy efficiency - kind of looking for the sweet spot in the middle.

This card is on a rig where electricity is free, so it's not tuned for efficiency:

[Card]: 1x Gigabyte GV-N1070G1 GAMING-8GD REV2.0
[TDP]: 105%
[Core]: +54 (2012)
[Memory]: +504
[Fan speed]: 50%
[Temp.]: 63C
[Whole system]: 500W (with a 1080Ti also mining)
[Mining performance]: 515 sol/s zcash
[Miner]: Bminer

Update:

Previous one was on EBWF. Those are on ZM miner:

Asus Strix GTX 1070 8GB
Power limit: 85%
[Core]: +130
[Memory]:+750 (micron memory)
[Fan speed]:Auto (usally below 40% or idling) due to low temperature in the enviroment
[Temp.]: 54-57
Hash rate: 460 sol/s (equihash)
Efficiency: 3,6 sol/wat

You can determine the hashrate of graphics card GRX  1070 at https://miningchamp.com/