|
Title: S9 hardware errors + discarded ??? Post by: mousehouse on July 31, 2017, 10:52:19 AM hi all!
I received my S9 13.5T and have it up and running for a day now, however I'm puzzled by two things in the GUI. See screenshot... I see HW errors on all three boards, with one board having way more errors than the others. Also, I see most of my work being discarded by the pool. Anybody else see this as well? I'd like to tune down the frequency a bit, but my miner seems to have the autotune firmware. Ideas? Thx! https://preview.ibb.co/knsc25/Screen_Shot_2017_07_31_at_12_47_19.png (https://ibb.co/cwBtaQ) Title: Re: S9 hardware errors + discarded ??? Post by: fanatic26 on July 31, 2017, 09:41:18 PM I know it may look strange but those are actually both normal things to see. Some boards just have more hw errors than others in my experience, but overall its pretty meaningless. As far as the auto tune firmware goes you are just stuck with it. Some people have claimed that doing an IP reporter reset brings them back to older firmware but I have not been able to duplicate it myself.
Title: Re: S9 hardware errors + discarded ??? Post by: MinerSRQ on August 01, 2017, 11:04:27 AM hi all! I received my S9 13.5T and have it up and running for a day now, however I'm puzzled by two things in the GUI. See screenshot... I see HW errors on all three boards, with one board having way more errors than the others. Also, I see most of my work being discarded by the pool. Anybody else see this as well? I'd like to tune down the frequency a bit, but my miner seems to have the autotune firmware. Ideas? Thx! https://preview.ibb.co/knsc25/Screen_Shot_2017_07_31_at_12_47_19.png (https://ibb.co/cwBtaQ) Please tell me that's not really 30k fan speed!? Title: Re: S9 hardware errors + discarded ??? Post by: swedenrt on August 09, 2017, 09:04:23 PM What is the status of this finally? any new model in the market?
Title: Re: S9 hardware errors + discarded ??? Post by: fanatic26 on August 09, 2017, 11:03:37 PM Please tell me that's not really 30k fan speed!? I have had S9s report crazy fan speeds since I started with them. It is for sure not spinning at anything over 6000rpm as that is the limit of the motor. Title: Re: S9 hardware errors + discarded ??? Post by: philipma1957 on August 09, 2017, 11:37:03 PM hi all! I received my S9 13.5T and have it up and running for a day now, however I'm puzzled by two things in the GUI. See screenshot... I see HW errors on all three boards, with one board having way more errors than the others. Also, I see most of my work being discarded by the pool. Anybody else see this as well? I'd like to tune down the frequency a bit, but my miner seems to have the autotune firmware. Ideas? Thx! https://preview.ibb.co/knsc25/Screen_Shot_2017_07_31_at_12_47_19.png (https://ibb.co/cwBtaQ) fixed image. the hw errors are not much the % is tiny 0.0003% which means if you earn a btc by mining you would get 0.9997 btc if the hw read 0.0100 or more I would worry discards are nothing this is not any thing at all. what does the miner show on kano 12.5th? 13.0 th? as this is what you get paid by not the gui numbers the fan is wrong try a software reboot it may go away |
