Title: Ethereum Mining Rig Black Screen (Not working) Post by: kujaku1337 on September 17, 2017, 12:36:29 PM Hello guys,
I have some difficulties with my mining rig. I started a big project with 6 Mining Rigs. To evaluate the project i use this setup: RAM: Crucial 4GB DDR4 Mainboard: MSI Pro Solution Intel Z170A CPU: Intel DUal Core Celeron G3950/3000 Disk: DREVO X1 Series 60GB SSD GPU: 1x Nvidia 1070 WF 8GB Power Supply: Corsair CP-9020094-EU RMX Serie RM1000X ATX 1000w GPU Adapter: PCI Express USB 3.0 Riser 1x to 16x Monero OS: Simplemining.net I put all the parts together. When I turn on the Rig the Fans start moving and a Red Light start for a few seconds. But I don't receive a picture on my screen. I used different monitors and cables. It still doesn't work. I tried to plug in the GPU just with the Adapter for power and then I tested it with additional power supply. It still doesn't work. Please help me guys. I spend a lot of money on that project! Thank you very much. Best Regards, Dean Here are the pictures of the "Rig" https://imgur.com/a/0d8EX (https://imgur.com/a/0d8EX) Title: Re: Ethereum Mining Rig Black Screen (Not working) Post by: leonix007 on September 17, 2017, 02:09:22 PM Hello guys, I have some difficulties with my mining rig. I started a big project with 6 Mining Rigs. To evaluate the project i use this setup: RAM: Crucial 4GB DDR4 Mainboard: MSI Pro Solution Intel Z170A CPU: Intel DUal Core Celeron G3950/3000 Disk: DREVO X1 Series 60GB SSD GPU: 1x Nvidia 1070 WF 8GB Power Supply: Corsair CP-9020094-EU RMX Serie RM1000X ATX 1000w GPU Adapter: PCI Express USB 3.0 Riser 1x to 16x Monero OS: Simplemining.net I put all the parts together. When I turn on the Rig the Fans start moving and a Red Light start for a few seconds. But I don't receive a picture on my screen. I used different monitors and cables. It still doesn't work. I tried to plug in the GPU just with the Adapter for power and then I tested it with additional power supply. It still doesn't work. Please help me guys. I spend a lot of money on that project! Thank you very much. Best Regards, Dean Here are the pictures of the "Rig" https://imgur.com/a/0d8EX (https://imgur.com/a/0d8EX) For isolation purpose, Don't use riser first, plugged in the 1070 card to the main PCI-e Slot, make sure that the main board power has plugged properly the 24pins and 8pins, try to bootup, if nothing happens, removed vcard and use the onboard. Title: Re: Ethereum Mining Rig Black Screen (Not working) Post by: kujaku1337 on September 17, 2017, 03:30:00 PM Thank you for your answer.
I tried that. Nothing happens. When i start with the onboard GPU the CPU Fan was faster. Any other ideas? |