Title: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 12:04:48 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti.
https://github.com/krnlx/ccminer-xevan Donations are welcome. UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti UPD2. Windows version by Palgin x86_64 https://mega.nz/#!NhhnGahJ!dGC_LNOi_a98BuHSuLZQB7k-YT-dM7I_We_svn1hCc0 x86 https://mega.nz/#!98xj3RyD!tfWT6yKHb7gQhzJMi0YYx7wwIX75wppE3Hw7grcMR-4 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: car1999 on October 05, 2017, 01:58:49 AM awesome, I'm compiling it, is there a recommend pool?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 02:03:47 AM I tested on yiimp and suprnova
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: car1999 on October 05, 2017, 02:22:56 AM it works fine with cuda8, ubuntu16,suprnova, gtx1080ti get 5.6m @core clock+100, 200watts.
I'll install cuda7.5. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: du44 on October 05, 2017, 02:28:23 AM Can someone share windows cuda 7.5 x32 biraries please?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FortuneNVirtue on October 05, 2017, 02:41:23 AM I got some errors compiling "identifier ulong is undefined" (file: cuda_bmw512.cu)
Could you help me please? PS. I am not a programmer, I tried to compile it with vs2013, cuda 7.5, windows 10. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 02:43:56 AM I got some errors compiling "identifier ulong is undefined" (file: cuda_bmw512.cu) Could you help me please? PS. I am not a programmer, I tried to compile it with vs2013, cuda 7.5, windows 10. try adding #define ulong uint64_t or just replace ulong with uint64_t Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FortuneNVirtue on October 05, 2017, 02:46:23 AM Thank you so much.
I'll try it. :D Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: greenhope on October 05, 2017, 03:49:32 AM Are you planning to bring one for windows?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 03:59:18 AM Are you planning to bring one for windows? I dont have windows PC, but someone will compile soon it under windows. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ..XyZ.. on October 05, 2017, 05:04:25 AM Any Win build please!
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: zjy on October 05, 2017, 05:25:52 AM Are you planning to bring one for windows? I dont have windows PC, but someone will compile soon it under windows. bug,if Disconnect,Can not connect again,just ctrl+c and start again,please fix it [2017-10-05 13:22:51] submit_upstream_work stratum_send_line failed [2017-10-05 13:22:51] ...retry after 30 seconds [2017-10-05 13:22:51] GPU#0:NONCE FOUND [2017-10-05 13:22:51] GPU#5:target 0 fec00000 13f [2017-10-05 13:22:51] GPU#5:target 13ffec00000 [2017-10-05 13:22:51] GPU#0:NONCE FOUND [2017-10-05 13:22:51] GPU#2:target 0 fec00000 13f [2017-10-05 13:22:51] GPU#2:target 13ffec00000 [2017-10-05 13:22:51] GPU#0:NONCE FOUND [2017-10-05 13:22:51] GPU#5:target 0 fec00000 13f [2017-10-05 13:22:51] GPU#5:target 13ffec00000 [2017-10-05 13:22:52] GPU#0:NONCE FOUND [2017-10-05 13:22:52] GPU#5:target 0 fec00000 13f [2017-10-05 13:22:52] GPU#5:target 13ffec00000 [2017-10-05 13:22:52] GPU#0:NONCE FOUND [2017-10-05 13:22:52] GPU#3:target 0 fec00000 13f [2017-10-05 13:22:52] GPU#3:target 13ffec00000 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 05:32:51 AM I will take a look.
As temporary solution you can use -r 0 option to manage miner exit after disconnect, and launch miner in a loop. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: NameTaken on October 05, 2017, 05:49:13 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. Your previous Skunk ccminer showed hashrate incorrectly so does this have the same problem?https://github.com/krnlx/ccminer-xevan Donations are welcome. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: startsts on October 05, 2017, 06:06:15 AM Good job! Works very well at ubuntu 16 with cuda 8.
One thing: for gtx 1060 3gb it sets too much intensity by default (22.5) so gets memory error. with -i 21 works well Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 06:15:03 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. Your previous Skunk ccminer showed hashrate incorrectly so does this have the same problem?https://github.com/krnlx/ccminer-xevan Donations are welcome. I had not this issue on my rigs... anyway I mined xevan for a week on yiimp, hashrate was ok. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 06:16:07 AM Good job! Works very well at ubuntu 16 with cuda 8. One thing: for gtx 1060 3gb it sets too much intensity by default (22.5) so gets memory error. with -i 21 works well ohhh it was old settings from x17... the best intensity on 1070 and 1080ti is 20, you can try it Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 06:44:15 AM Great (and big in amount) job done! You deserve every single donation ;)
People, sponsor this Developer, he makes great things for community for free (which becomes rare these days) You won't become poor person by sending few bucks to krnlx, he'll be pleased and this also highly motivates developement. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ..XyZ.. on October 05, 2017, 06:45:54 AM Im happy to do donation but no Win buld to test here :(
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 07:03:58 AM There is a 0.5btc bounty waiting for him. But he needs to make a windows build. ;D
I am building now. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: abudfv2008 on October 05, 2017, 07:18:12 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. May be you can make a win/linux binary. Otherwise there are big chances someone very soon will share a trojan binary of your miner.https://github.com/krnlx/ccminer-xevan It would be much better if that binary is made by you. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FortuneNVirtue on October 05, 2017, 07:28:59 AM Just compiled successfully (as you advised), but
I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 07:35:10 AM Just compiled successfully (as you advised), but I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? This is not good :( What changes did you made to source code ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 07:37:27 AM Just compiled successfully (as you advised), but Too high intensity in your case. Set -i 20I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? It's might help you. Can you share your binary please? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 05, 2017, 07:48:38 AM a win binary would be highly appreciated
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rusm35 on October 05, 2017, 08:16:58 AM I got some errors compiling "identifier ulong is undefined" (file: cuda_bmw512.cu) Could you help me please? PS. I am not a programmer, I tried to compile it with vs2013, cuda 7.5, windows 10. try adding #define ulong uint64_t or just replace ulong with uint64_t I'm not a programmer. Tell me please where to add it, I have the same mistake. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ioglnx on October 05, 2017, 08:19:09 AM There are many issues in the windows build - I fixed already 6 and the next coming up.
Like not compiling the deps (curl etc.) krnlx may you merge the setting of your skunk version since this properly works. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FortuneNVirtue on October 05, 2017, 08:25:20 AM Just compiled successfully (as you advised), but I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? This is not good :( What changes did you made to source code ? 1. added #define ulong uint64_t (I also tried to replace ulong with uint64_t, both result the same.) 2. changed uint ord to int ord (cuda_sha512_lbry.cu) because it show error. 3. added files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) I may do something wrong, but please suggest me, Thank you. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 08:28:24 AM Stick to Linux build. Even after removing part of CPU validation from Win build yiimp rejects shares, which means hashing go wrong on Windows. Think it may be lib-related issue, maybe someone will fix :)
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: CryptoGeneral on October 05, 2017, 08:31:05 AM There is a 3000 XLR bounty for a Windows xevan miner. I'll hope that you can make it happen.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: nax on October 05, 2017, 08:36:35 AM Just compiled successfully (as you advised), but I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? This is not good :( What changes did you made to source code ? 1. added #define ulong uint64_t (I also tried to replace ulong with uint64_t, both result the same.) 2. changed uint ord to int ord (cuda_sha512_lbry.cu) because it show error. 3. added files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) I may do something wrong, but please suggest me, Thank you. same error here Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 08:39:12 AM krnlx deserves every existing bounty for this algo because he was first to release, all others will be copy-paste guys. Win binary is not obligatory, code is open and it's just a matter of time when it will become avaliable.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: }{uNdd on October 05, 2017, 08:42:47 AM Just compiled successfully (as you advised), but I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? This is not good :( What changes did you made to source code ? 1. added #define ulong uint64_t (I also tried to replace ulong with uint64_t, both result the same.) 2. changed uint ord to int ord (cuda_sha512_lbry.cu) because it show error. 3. added files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) I may do something wrong, but please suggest me, Thank you. the last point error , i still finding where to copy ... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 08:45:32 AM I have a windows build. But Xevan is not profitable. any more.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: startsts on October 05, 2017, 08:45:42 AM Can you tell me what multiplier has xevan algo? I set to my pool multiplier 24 and my pool show more 20% hashrate than the ccminer.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 08:48:12 AM 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) Copy and replace the folder compat/curl-for-windows from the alexis 1.0 rep on github. build with cuda 7.5 and visual studio 2013 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: abudfv2008 on October 05, 2017, 08:49:18 AM krnlx deserves every existing bounty for this algo because he was first to release, all others will be copy-paste guys. Win binary is not obligatory, code is open and it's just a matter of time when it will become avaliable. It is not obligatory. But do you think that coming sooner or later malware binaries are better?Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FortuneNVirtue on October 05, 2017, 08:50:56 AM Just compiled successfully (as you advised), but I got something like : GPU#0: NONCE FOUND GPU#0: result for 00000128 does not validate on CPU! Any suggestion, please ? This is not good :( What changes did you made to source code ? 1. added #define ulong uint64_t (I also tried to replace ulong with uint64_t, both result the same.) 2. changed uint ord to int ord (cuda_sha512_lbry.cu) because it show error. 3. added files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) I may do something wrong, but please suggest me, Thank you. the last point error , i still finding where to copy ... I just copied from alexis78's ccminer. (I just guessed, because it's vs2013 and cuda7.5, other versions of ccminer may work as well, I don't know) And what palgin said is alsolutely right, krnlx deserves every bounty for opensource xevan ccminer/nvidia gpu miner. (Solaris and Bitsend as I know) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 05, 2017, 08:54:19 AM Stick to Linux build. Even after removing part of CPU validation from Win build yiimp rejects shares, which means hashing go wrong on Windows. Think it may be lib-related issue, maybe someone will fix :) Can you please printout hashing result on every algo with zero input data(x17/x17.cu, commented out code) both on linux and windows to determine where is the bug related to windows version? My rigs are headless and far away from me, I can't test it on windows ;( Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: nax on October 05, 2017, 08:54:37 AM 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) Copy and replace the folder compat/curl-for-windows from the alexis 1.0 rep on github. build with cuda 7.5 and visual studio 2013 How did you solve this problem? https://ibb.co/bHPGow Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: }{uNdd on October 05, 2017, 08:56:14 AM 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) Copy and replace the folder compat/curl-for-windows from the alexis 1.0 rep on github. build with cuda 7.5 and visual studio 2013 thx , done the curl problem still (got cpu validation problem) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: nax on October 05, 2017, 09:01:57 AM 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) Copy and replace the folder compat/curl-for-windows from the alexis 1.0 rep on github. build with cuda 7.5 and visual studio 2013 same problem, invalid cpu, how did you solve it, I already tried to compile in cuda 7.5 cuda 8 32bits and 64bits and everyone is giving invalid cpu Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: abudfv2008 on October 05, 2017, 09:02:27 AM 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) Copy and replace the folder compat/curl-for-windows from the alexis 1.0 rep on github. build with cuda 7.5 and visual studio 2013 thx , done the curl problem if anyone needed i can share out the x64, cuda 8.0 version Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 09:09:29 AM There are warnings in the compilation you need to fix. (shift count overflow warnings ) (skein) I am building with cuda 9.0 now. x86 to test.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ioglnx on October 05, 2017, 09:13:43 AM 4. copied folder "compat/curl-for-windows/out/ from somewhere else to "compat/curl-for-windows" (it asked for libcurl.x86.lib as states in linker) Copy and replace the folder compat/curl-for-windows from the alexis 1.0 rep on github. build with cuda 7.5 and visual studio 2013 thx , done the curl problem if anyone needed i can share out the x64, cuda 8.0 version Could you please be so kind to share a 32bit and 64bit build? I copied the curl libs too but no success. Thanks Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: WelcomeHomeCrypto on October 05, 2017, 09:29:31 AM A compiled Windows binary would be greatly appreciated.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: }{uNdd on October 05, 2017, 09:32:17 AM Stick to Linux build. Even after removing part of CPU validation from Win build yiimp rejects shares, which means hashing go wrong on Windows. Think it may be lib-related issue, maybe someone will fix :) the windows build had this problem, still need solve .... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ..XyZ.. on October 05, 2017, 10:55:23 AM Any news about win build?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: xarix on October 05, 2017, 11:02:58 AM Awesome!
Finally Xevan gets some proper attention,now bring on the win miner 8) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: psihotoc on October 05, 2017, 11:13:49 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. Healthy buddy. See what the situation is, there is a Solaris coin and this coin needs a miner to Win with the algorithm Xeven. Solaris Dev pays 3000 coins to those who create. After Swop coins, its price will be very good and this amount of coins will make sozdatelya miner just rich. ;)https://github.com/krnlx/ccminer-xevan Donations are welcome. UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: startsts on October 05, 2017, 11:53:25 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. Healthy buddy. See what the situation is, there is a Solaris coin and this coin needs a miner to Win with the algorithm Xeven. Solaris Dev pays 3000 coins to those who create. After Swop coins, its price will be very good and this amount of coins will make sozdatelya miner just rich. ;)https://github.com/krnlx/ccminer-xevan Donations are welcome. UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti Quote sozdatelya :D :D :D good @krnlx, yes please check XLR coin discussion, you deserve 3000 coins reward it's about 1500$ on current price and can grow more Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Thebestis7950 on October 05, 2017, 11:58:40 AM I am excited waiting for windows miner
want to mine xevan solaris Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rednoW on October 05, 2017, 12:29:58 PM Windows compile is broken and it is not simply "add lib or typedef" problem. So I think no bounty until it is fixed.
Moreover, if someone will manage to make it work with windows it will be he (she) who could receive the XLR bounty Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 12:38:15 PM Can you please printout hashing result on every algo with zero input data(x17/x17.cu, commented out code) both on linux and windows to determine where is the bug related to windows version? My rigs are headless and far away from me, I can't test it on windows ;( Sorry, I'm quite far from my rigs too, ran away from rainy october to the South. Just saw topic with your miner and was curious to check. I'll try to help with Win debugging, but all I have now is weak internet connection and Anydesk running on Windows machine :'( P.S : sent krnlx PM, hope we'll figure out the root of the problem. Anyway, it started raining in here too, so now it's coding time ;D ;D ;D Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 02:57:39 PM Help please!
I almost compile Win_x64 but have the next errores in the end of process: Error 1 error LNK2001: unresolved external symbol "void __cdecl x13_hamsi512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_hamsi512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 2 error LNK2001: unresolved external symbol "void __cdecl x13_fugue512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_fugue512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 3 error LNK2001: unresolved external symbol "void __cdecl xevan_whirlpool_cpu_hash_64(int,unsigned int,unsigned int *)" (?xevan_whirlpool_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 4 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj What am i do wrong? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FortuneNVirtue on October 05, 2017, 03:10:33 PM Help please! I almost compile Win_x64 but have the next errores in the end of process: Error 1 error LNK2001: unresolved external symbol "void __cdecl x13_hamsi512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_hamsi512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 2 error LNK2001: unresolved external symbol "void __cdecl x13_fugue512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_fugue512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 3 error LNK2001: unresolved external symbol "void __cdecl xevan_whirlpool_cpu_hash_64(int,unsigned int,unsigned int *)" (?xevan_whirlpool_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 4 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj What am i do wrong? Add files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project by 1. explore the solution ccminer 2. under ccminer -> source files 3. you'll see x13 folder, right click to Add -> Existing Item 4. add cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 03:19:34 PM Help please! I almost compile Win_x64 but have the next errores in the end of process: Error 1 error LNK2001: unresolved external symbol "void __cdecl x13_hamsi512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_hamsi512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 2 error LNK2001: unresolved external symbol "void __cdecl x13_fugue512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_fugue512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 3 error LNK2001: unresolved external symbol "void __cdecl xevan_whirlpool_cpu_hash_64(int,unsigned int,unsigned int *)" (?xevan_whirlpool_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 4 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj What am i do wrong? Add files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project by 1. explore the solution ccminer 2. under ccminer -> source files 3. you'll see x13 folder, right click to Add -> Existing Item 4. add cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu Ok, it's almost helped, but now i still have the last errore: Error 13 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 03:21:53 PM If anyone with Linux wants to help Win users, replace your x17.cu contents with this code:
Code: (x17.cu) /** Then recompile and run for a few seconds, before first rejected share. Send me your output in PM or publish it here. Thanks for everybody in advance! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: zer0k on October 05, 2017, 03:35:30 PM Help please! I almost compile Win_x64 but have the next errores in the end of process: Error 1 error LNK2001: unresolved external symbol "void __cdecl x13_hamsi512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_hamsi512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 2 error LNK2001: unresolved external symbol "void __cdecl x13_fugue512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_fugue512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 3 error LNK2001: unresolved external symbol "void __cdecl xevan_whirlpool_cpu_hash_64(int,unsigned int,unsigned int *)" (?xevan_whirlpool_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 4 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj What am i do wrong? Add files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project by 1. explore the solution ccminer 2. under ccminer -> source files 3. you'll see x13 folder, right click to Add -> Existing Item 4. add cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu Ok, it's almost helped, but now i still have the last errore: Error 13 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Perhaps... 1. explore the solution ccminer 2. under ccminer -> source files 3. you'll see x17 folder, right click to Add -> Existing Item 4. add cuda_x17_sha512.cu Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 03:42:47 PM Help please! I almost compile Win_x64 but have the next errores in the end of process: Error 1 error LNK2001: unresolved external symbol "void __cdecl x13_hamsi512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_hamsi512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 2 error LNK2001: unresolved external symbol "void __cdecl x13_fugue512_cpu_hash_64(int,unsigned int,unsigned int *)" (?x13_fugue512_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 3 error LNK2001: unresolved external symbol "void __cdecl xevan_whirlpool_cpu_hash_64(int,unsigned int,unsigned int *)" (?xevan_whirlpool_cpu_hash_64@@YAXHIPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Error 4 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj What am i do wrong? Add files cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu to the project by 1. explore the solution ccminer 2. under ccminer -> source files 3. you'll see x13 folder, right click to Add -> Existing Item 4. add cuda_x13_fugue512.cu and cuda_x13_hamsi512.cu Ok, it's almost helped, but now i still have the last errore: Error 13 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Perhaps... 1. explore the solution ccminer 2. under ccminer -> source files 3. you'll see x17 folder, right click to Add -> Existing Item 4. add cuda_x17_sha512.cu Didn't help cause this file are allready exist in source files. If i remoove it and add again - same errore: Error 1 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj I think all project are missing one important file, something like "xevan_sha512.cu" or so... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 03:50:07 PM Didn't help cause this file are allready exist in source files. If i remoove it and add again - same errore: Error 1 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Nothing will help with Winbuild before any Linux user send hashing output using "debug" ver of x17.cu, so don't even bother. You can check yiimp bench, no ccminer-krnlx running on Win ;) Think your error is caused by wrong Curl lib or Dev environment, you need VS2013 and Curl built with the same VS version, and don't forget about architecture (x86/x64). Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 03:53:14 PM Didn't help cause this file are allready exist in source files. If i remoove it and add again - same errore: Error 1 error LNK2001: unresolved external symbol "void __cdecl xevan_sha512_cpu_hash_64(int,int,unsigned int *)" (?xevan_sha512_cpu_hash_64@@YAXHHPEAI@Z) D:\ccminer-xevan-master\x17.cu.obj Nothing will help with Winbuild before any Linux user send hashing output using "debug" ver of x17.cu, so don't even bother. You can check yiimp bench, no ccminer-krnlx running on Win ;) Think your error is caused by wrong Curl lib or Dev environment, you need VS2013 and Curl built with the same VS version, and don't forget about architecture (x86/x64). All proper Curl libs, VS2013 and CUDA 7.5 are installed Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 03:56:55 PM All proper Curl libs, VS2013 and CUDA 7.5 are installed cuda_sha512_lbry.cu - function you need is in this file, check if it's attached to your project. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 05, 2017, 04:13:53 PM Finally managed to compile it for Windows x64 @ CUDA 7.5.
Of course it's not working, looking forward to the fix from the experienced ones. https://i.imgur.com/Mgh3vBk.png Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 04:20:36 PM Finally managed to compile it for Windows x64 @ CUDA 7.5. Of course it's not working, looking forward to the fix from the experienced ones. https://i.imgur.com/Mgh3vBk.png I've compiled too but the same issue...( Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: integrale on October 05, 2017, 04:22:50 PM Great Job done Guys
have it succesfull compiled on Ubuntu 16.04 LTS Cuda 7.5 Nv 384.90 running on a poor small GTX 1050 @ 1.1Mh/s with intensity of 19 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 05, 2017, 04:22:59 PM If anyone with Linux wants to help Win users, replace your x17.cu contents with this code: Code: (x17.cu) /** Then recompile and run for a few seconds, before first rejected share. Send me your output in PM or publish it here. Thanks for everybody in advance! Bump! Any help much appreciated. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 04:27:12 PM If anyone with Linux wants to help Win users, replace your x17.cu contents with this code: Code: (x17.cu) /** Then recompile and run for a few seconds, before first rejected share. Send me your output in PM or publish it here. Thanks for everybody in advance! Bump! Any help much appreciated. Seems no *nix user wants to help MS guys ;D Will have to wait for krnlx to run it on his machine. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: integrale on October 05, 2017, 04:30:26 PM im running on "nix" if i can help ? im not a pro but can try it
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 05, 2017, 04:30:42 PM It's from Z-pool bench:
xevan 26h 1070 GeForce GTX 1070 10de:119d SM 6.1 2.27 MH 21 1822 109 20.791 k cpuminer-opt/6.6.6 win64 CUDA 8.0 382.53 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.26 MH 21 1797 101 22.363 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 16h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.26 MH 21 1797 108 20.905 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.26 MH 21 1797 107 21.088 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.25 MH 21 1797 107 21.074 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 26h 1070 GeForce GTX 1070 10de:119d SM 6.1 2.25 MH 21 1822 110 20.479 k cpuminer-opt/6.6.6 win64 CUDA 8.0 382.53 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.25 MH 21 1797 104 21.658 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 16h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.25 MH 21 1797 140 16.056 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.25 MH 21 1797 91 24.674 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.24 MH 21 1797 108 20.739 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.24 MH 21 1797 105 21.308 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 17h 1070 EVGA GTX 1070 FTW 3842:6276 SM 6.1 2.24 MH 21 1797 96 23.289 k cpuminer-opt/6.6.6 win64 CUDA 8.0 385.28 xevan 2d 1070 GeForce GTX 1070 10de:119d SM 6.1 2 MH 21 1683 79 25.305 k ccminer/8.13-KlausT linux CUDA 8.0 375.66 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.97 MH 21 1721 81 24.36 k cpuminer-opt/6.6.6 win64 CUDA 8.0 384.94 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.9 MH 21 1721 186 10.209 k ccminer/8.13-dj win64 CUDA 8.0 384.94 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.71 MH 21 1721 96 17.835 k ccminer/8.13-dj win64 CUDA 8.0 384.94 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.61 MH 21 1721 153 10.535 k ccminer/8.13-dj win64 CUDA 8.0 384.94 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.54 MH 21 1721 117 13.157 k ccminer/8.13-dj win64 CUDA 8.0 384.94 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.52 MH 21 1721 106 14.386 k ccminer/8.13-dj win64 CUDA 8.0 384.94 xevan 2d 1080 Ti GeForce GTX 1080 Ti 10de:120f SM 6.1 1.48 MH 21 1721 124 11.964 k ccminer/8.13-dj win64 CUDA 8.0 384.94 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sickofscamcoins on October 05, 2017, 04:36:25 PM http://paste.ubuntu.com/25680610/
this is results of output, replacing x17.cu and recompile with one posted palgin. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 04:37:47 PM http://paste.ubuntu.com/25680610/ this is results of output, replacing x17.cu and recompile with one posted palgin. Thank you, will check it! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: integrale on October 05, 2017, 04:39:29 PM copied from my Linux build x17.cu hopefully it helps
Code: /** Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sickofscamcoins on October 05, 2017, 04:42:56 PM http://paste.ubuntu.com/25680610/ this is results of output, replacing x17.cu and recompile with one posted palgin. Thank you, will check it! http://paste.ubuntu.com/25680643/ no escape characters this time Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 04:51:19 PM UPDATE: Hashing is exactly the same as on Win, so it comes out to be very weird problem. The one thing I suspect is ulong and uint compiler handling difference on Win and on *nix, for example, ulong will be equal to uint64_t on 64-bit build, but different on 32-bit build. Will look into this way, maybe will come up with something.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sickofscamcoins on October 05, 2017, 04:58:52 PM welp i tried for my cookie anyways. Anything else I can do to help lmk
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Nesp on October 05, 2017, 05:57:04 PM Any binaries?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 05, 2017, 05:59:06 PM Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 06:01:08 PM Next part of check, now GPU part. All the same, x17.cu is following:
Code: /** Thanks for everybody who helps in investigation. UPDATE: think I've found the bug, it's in xevan_haval512_cpu_hash_64_final function, so h_resNonce[0] and h_resNonce[1] are always random on Win with exactly the same input data... Need confirmation that behaviour is different on *nix, of course. CUDA memcpy bug? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Nesp on October 05, 2017, 06:18:19 PM Hahah, nice one Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sickofscamcoins on October 05, 2017, 06:23:26 PM Next part of check, now GPU part. All the same, x17.cu is following: http://paste.ubuntu.com/25681179/ Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 06:26:33 PM Next part of check, now GPU part. All the same, x17.cu is following: http://paste.ubuntu.com/25681179/ Thank you, you're really helping, will check now. UPDATE: Hmm, behaviour is the same, but what is more strange, pool accepts shares? That shouldn't be this way, my mind blows off, think everybody should wait for krnlx comments, he's the code author ;D Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 05, 2017, 06:43:59 PM It has something to do with platform target (x86/x64) for sure.
See below how it behaves for x86. https://i.imgur.com/Jflx8RB.png Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: magnacartic on October 05, 2017, 06:58:22 PM Somehow I got stuck at the api.cpp stage during compilation:
ccminer-util.o: In function `stratum_handle_method': util.cpp:(.text+0x4af3): undefined reference to `gpu_power(cgpu_info*)' util.cpp:(.text+0x4b51): undefined reference to `nvml_get_current_clocks(int, unsigned int*, unsigned int*)' util.cpp:(.text+0x4b59): undefined reference to `gpu_info(cgpu_info*)' ccminer-api.o: In function `gpustatus(int)': api.cpp:(.text+0x554): undefined reference to `gpu_busid(cgpu_info*)' api.cpp:(.text+0x560): undefined reference to `gpu_temp(cgpu_info*)' api.cpp:(.text+0x56b): undefined reference to `gpu_fanpercent(cgpu_info*)' api.cpp:(.text+0x57b): undefined reference to `gpu_fanrpm(cgpu_info*)' api.cpp:(.text+0x587): undefined reference to `gpu_power(cgpu_info*)' ccminer-api.o: In function `gpuhwinfos(int)': api.cpp:(.text+0xbf0): undefined reference to `gpu_busid(cgpu_info*)' api.cpp:(.text+0xbfc): undefined reference to `gpu_temp(cgpu_info*)' api.cpp:(.text+0xc07): undefined reference to `gpu_fanpercent(cgpu_info*)' api.cpp:(.text+0xc17): undefined reference to `gpu_fanrpm(cgpu_info*)' api.cpp:(.text+0xc23): undefined reference to `gpu_pstate(cgpu_info*)' api.cpp:(.text+0xc2f): undefined reference to `gpu_power(cgpu_info*)' api.cpp:(.text+0xc42): undefined reference to `gpu_info(cgpu_info*)' collect2: error: ld returned 1 exit status make[2]: *** [ccminer] Error 1 Any ideas on how to fix this? Compiling on Ubuntu 14.04 & CUDA 8.0 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: milliza on October 05, 2017, 07:06:29 PM i try to build it on visual studio 2013 but i get next error
error LNK1181: cannot open input file 'libcurl.x64.lib' ccminer can someone help me ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 05, 2017, 07:32:06 PM it works fine with cuda8, ubuntu16,suprnova, gtx1080ti get 5.6m @core clock+100, 200watts. Compilation with no problem under Ubuntu 16.04 and Cuda 8.But, when I start the ccminer, he ask me for the Cuda 7.5 library... How do you make to use the Cuda 8 library (Cuda 7.5 is not installed on this new RIG installation) ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 08:07:08 PM it works fine with cuda8, ubuntu16,suprnova, gtx1080ti get 5.6m @core clock+100, 200watts. Compilation with no problem under Ubuntu 16.04 and Cuda 8.But, when I start the ccminer, he ask me for the Cuda 7.5 library... How do you make to use the Cuda 8 library (Cuda 7.5 is not installed on this new RIG installation) ? Check /usr/local for cuda folders. Default coming in configure.sh is cuda 7.5 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 08:25:41 PM I don't undestand why you spend so much time on a non profitable shitcoin. So many coders, and no progress. I buildt the shit on windows in 30 minutes and it works perfectly fine... 5 pages already with puppet postings.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ans34 on October 05, 2017, 08:28:15 PM I don't undestand why you spend so much time on a non profitable shitcoin. So many coders, and no progress. I buildt the shit on windows in 30 minutes and it works perfectly fine... 5 pages already with puppet postings. If it is shitcoin and non profit why don't you share binaries?Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 05, 2017, 08:30:07 PM Dear sp_,
Stop being an ass for once. Seriously now, is it worth it?! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 08:32:22 PM I don't undestand why you spend so much time on a non profitable shitcoin. So many coders, and no progress. I buildt the shit on windows in 30 minutes and it works perfectly fine... 5 pages already with puppet postings. So, sell it for 200 bucks/copy and claim bounties, make yourself richer, you know it ;D ;D ;D ;D It's just fun, debugging always train your skills ;) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 08:32:31 PM sorry, the bin is under GPL licence. You have to wait for the cuda-students to do the job for free..
Works great on linux. Let the shitcoins be mined on linux.. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: integrale on October 05, 2017, 08:43:28 PM let him talking bla bla ,
we are his pain in the a.. because Xevan-gpu goes public for free ;) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 05, 2017, 09:38:22 PM OK, I give up on this for today.
For krnlx, if he needs it, of course: Win output after single roll (https://pastebin.com/m7KGcWMe) It's clear from the output that resulting hashes from CPU and GPU are completely different. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 09:47:18 PM It's clear from the output that resulting hashes from CPU and GPU are completely different. The krlx kernel is just another alxis rippoff. Change a few lines of gpl code, and claim the 0.5 btc bounty. The bounty should go to the developers of the alexei miner. 0.5 btc just for changing a few padding bytes??? Really? and not even capable of creating a working windows binary. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sickofscamcoins on October 05, 2017, 09:49:19 PM Dear sp_,
you just wish you got ther^H^H^H^Hmade money off it first. Here is a spoon, for which to eat my ass. Much love. - ??? WindowsWalletDev ??? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 05, 2017, 09:59:05 PM When a team of wallet developers are competing with kernel developers, you usually end up with non profitable shitcode. To beat a grandmaster, you need to become a grandmaster.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: DextroFree on October 05, 2017, 10:08:02 PM It's clear from the output that resulting hashes from CPU and GPU are completely different. The krlx kernel is just another alxis rippoff. Change a few lines of gpl code, and claim the 0.5 btc bounty. The bounty should go to the developers of the alexei miner. 0.5 btc just for changing a few padding bytes??? Really? and not even capable of creating a working windows binary. Are you trolling yourself? Isn't that exactly what you did for months? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 05, 2017, 10:09:34 PM This totally reminds me of the time when I was so into unlocking phones. You had the devs who were stealing from each other and the ones who actually developed stuff. But on a serious level SP_, which coins do you consider to be not-so-shitcoin?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: PandaVLike on October 05, 2017, 10:10:39 PM When a team of wallet developers are competing with kernel developers, you usually end up with non profitable shitcode. To beat a grandmaster, you need to become a grandmaster. Why so salty sp_ ? and what is the point keep pointing out non profitable shitcode, what you gain from this? To beat a grandmaster obviously you need be grandmaster, yet you are not grandmaster..hahahaha Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Thebestis7950 on October 05, 2017, 10:12:40 PM when will we see windows version
i cant do linux im not very smart Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sickofscamcoins on October 05, 2017, 10:14:32 PM Dear Palgin & krnlx (and Alexis & Epsylon),
Thank you so much for your work, I see great things for ccminer dev scene with you guys. You guys have not forgotten the childlike wonder and excitement in tinkering. Don't ever become like sp_ -- and don't ever let his toxicity scare you guys off. You guys are assets to CUDA mining scene. I am amateur crypto farmer, big enough to benefit from small gains but too small to afford every new sp_ bin. It's not all about money -- yes, we are all here to make money -- but some also enjoy the hobbyist aspect of this stuff too. I play around with ccminer code too for fun, and just bought two books on CUDA development. Maybe one day I can join you guys. sp_ sits all day in his little safe zone thumping his dick against the kitchen table about how great he is, and comes here to piss on others with his "oh it's 30 minute job" -- if it is 30 minute job, then contribute or fuck off. How do you think people become as "great" as you? They put their nose to the grindstone and work hard. ??? WindowsWalletDev ??? p.s. sp_ when exactly did you realize you liked men Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 05, 2017, 10:35:20 PM it works fine with cuda8, ubuntu16,suprnova, gtx1080ti get 5.6m @core clock+100, 200watts. Compilation with no problem under Ubuntu 16.04 and Cuda 8.But, when I start the ccminer, he ask me for the Cuda 7.5 library... How do you make to use the Cuda 8 library (Cuda 7.5 is not installed on this new RIG installation) ? Check /usr/local for cuda folders. Default coming in configure.sh is cuda 7.5 I made the update of my paths (i forgot that was an old USB key with Cuda 7.5 previously installed :-)). Works fine, thank you dev. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: CH0DE on October 05, 2017, 11:05:56 PM When a team of wallet developers are competing with kernel developers, you usually end up with non profitable shitcode. To beat a grandmaster, you need to become a grandmaster. SP I am so sorry you feel this way. I mean your miner mods are very mediocre in hash improvement. They also overheat my gpus and I need to wear earplugs around the house. I actually bought some because of your over compensation of gpu power which ends up costing me more anyway. SleepSoft by Alpine, great reusable earplugs. I highly recommend them when using an SP mod. I also accuse you of a very minor but noticeable hash stealing code in one or two of your miners. I will look into it more and let the community know of your blatant rascality and theft. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: antantti on October 05, 2017, 11:39:34 PM Wow, I must have missed something, sp_ why are you megatrolling in krnlx's thread? Why are you so pissed off? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: tazmako on October 06, 2017, 01:36:31 AM Thank
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: maxmad_x on October 06, 2017, 01:44:00 AM LOL this whole thread..
All the hard work was done by original developers such as Palgin, krnlx, Alexis & Epsylon sp_ is just a cheap hooker profiting off their hard work! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: NameTaken on October 06, 2017, 05:04:09 AM I checked pool API and why is one miner getting such high rejection?
Code: { Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 06, 2017, 05:23:43 AM I checked pool API and why is one miner getting such high rejection? Perhaps because the difficulty of your second miner : "difficulty" : 46.Code: { 46 is a wrong value for CCMiner. 26 is a accepted value, but huge : what is this RIG ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 06, 2017, 05:25:51 AM Anybody can remember me where and the syntax, in the command line, I can manage the difficulty (not the intensity, it is done) ?
Is there a "=" in the syntax or not ? I think I have not the correct share rate... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: NameTaken on October 06, 2017, 05:28:17 AM I checked pool API and why is one miner getting such high rejection? Perhaps because the difficulty of your second miner : "difficulty" : 46.Code: { 46 is a wrong value for CCMiner. 26 is a accepted value, but huge : what is this RIG ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Amph on October 06, 2017, 05:33:45 AM no windows build yet?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 06, 2017, 05:39:08 AM I checked pool API and why is one miner getting such high rejection? Perhaps because the difficulty of your second miner : "difficulty" : 46.Code: { 46 is a wrong value for CCMiner. 26 is a accepted value, but huge : what is this RIG ? Making the difficulty in the password field is working for some specifics configurations like MiningRigRentals, but I don't know if it is OK with this Xevan version of CCMiner. You/We have to try... On which pool are you ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 05:56:44 AM no windows build yet? No, krnlx is quite busy, I'm off home on holiday trip with only remote access to dev machine, _sp is only trolling :D Debugging is ongoing, but it's quite slow in present conditions. UPDATE: OK, hope I've fixed it, it's **** Win weirdo syntax problem, now it seems that the rest is on yiimp side (difficulty problem mentioned above). Proof: https://imgur.com/tojeKaN.png https://imgur.com/tojeKaN.png (https://imgur.com/tojeKaN.png) It's very pre-alfa build and I won't release it, I'll send source and binaries to krnlx for him to claim bounties. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: konqueror on October 06, 2017, 07:06:25 AM It's clear from the output that resulting hashes from CPU and GPU are completely different. The krlx kernel is just another alxis rippoff. Change a few lines of gpl code, and claim the 0.5 btc bounty. The bounty should go to the developers of the alexei miner. 0.5 btc just for changing a few padding bytes??? Really? and not even capable of creating a working windows binary. The same way you are not even capable of creating a linux binary but suggesting wine :D Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 06, 2017, 07:08:30 AM no windows build yet? No, krnlx is quite busy, I'm off home on holiday trip with only remote access to dev machine, _sp is only trolling :D Debugging is ongoing, but it's quite slow in present conditions. UPDATE: OK, hope I've fixed it, it's **** Win weirdo syntax problem, now it seems that the rest is on yiimp side (difficulty problem mentioned above). Proof: https://imgur.com/tojeKaN.png https://imgur.com/tojeKaN.png (https://imgur.com/tojeKaN.png) It's very pre-alfa build and I won't release it, I'll send source and binaries to krnlx for him to claim bounties. Great news, thanks for the effort! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 07:16:51 AM Great news, thanks for the effort! Another error showed up, so keep digging code ??? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 06, 2017, 07:38:41 AM Who know how many time/blocks for the confirmation block with BitSend ?
More than 10 hours and still no block confirmed for me... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: foldingextra on October 06, 2017, 08:27:04 AM Nice to know finally xevan algo for nvidia. I will compile it in linux and waiting to try out mining the new solaris soon.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: cryptojai on October 06, 2017, 09:07:28 AM no windows build yet? No, krnlx is quite busy, I'm off home on holiday trip with only remote access to dev machine, _sp is only trolling :D Debugging is ongoing, but it's quite slow in present conditions. UPDATE: OK, hope I've fixed it, it's **** Win weirdo syntax problem, now it seems that the rest is on yiimp side (difficulty problem mentioned above). Proof: https://imgur.com/tojeKaN.png https://imgur.com/tojeKaN.png (https://imgur.com/tojeKaN.png) It's very pre-alfa build and I won't release it, I'll send source and binaries to krnlx for him to claim bounties. Appreciate your honesty and help for the community . Hope we will at least have a beta build before solaris' new network goes live. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 06, 2017, 09:34:59 AM For Solaris (XLR) mining : which pool are you using.
I'm trying ZPool and YiImp, but not very efficients. What pool for XLR mining ? Thanks. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 09:44:00 AM Finally, bug found and fixed. Windows binary is on the go :D
Hope krnlx will publish my win binaries on his GitHub, as a prove of being first dev. Just wait a bit. UPDATE: everything compiled and sent to krnlx, the rest is on him. Just check his git from time to time. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: btcman1 on October 06, 2017, 10:01:21 AM Finally, bug found and fixed. Windows binary is on the go :D Nice newsHope krnlx will publish my win binaries on his GitHub, as a prove of being first dev. Just wait a bit. Good work!. When it is published I will test it with gtx 1070 and 1080 on win 10 x64 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: krnlx on October 06, 2017, 10:26:15 AM Github updated with Windows binaries. Thanks Palgin!
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 06, 2017, 10:49:05 AM Great news.
Are you peeps mining bitsend or solaris? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 06, 2017, 10:52:57 AM Works like a charm!
Thanks! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: WelcomeHomeCrypto on October 06, 2017, 10:58:26 AM Thanks Palgin, you did a great job with the Windows version.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 06, 2017, 11:00:50 AM Works great, got about 12MH/s with 5x 1070's (Powerlimit 61, Core +150, Mem +400 my ZEC settings)
Still more profitable to mine equihash coins, any suggestions for the Afterburner settings? It's more a powersafe setting. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rednoW on October 06, 2017, 11:04:59 AM Big thanx krnlx and palgin.
Just built cuda7.5x64 version and it seems to be 5% faster then palgin's cuda8x64 build. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 11:08:56 AM It's alexis78 base, optimised for cuda 7.5, so it should be faster. Try x86 build, it's generally faster in CUDA8 not specifically optimised case, or build your own binaries, experiment ;)
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rednoW on October 06, 2017, 11:19:04 AM It's alexis78 base, optimised for cuda 7.5, so it should be faster. Try x86 build, it's generally faster in CUDA8 not specifically optimised case, or build your own binaries, experiment ;) No, I love those wattage and temp monitoring in x64 builds so x86 build is not for me ))And my binary is only 20mb ... yours is 37 ... why? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vivik on October 06, 2017, 11:22:07 AM 25Mh - 8 1070 x64 version
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 06, 2017, 11:23:01 AM 25Mh - 8 1070 x64 version Which core/mem settings do you use? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vivik on October 06, 2017, 11:29:04 AM 25Mh - 8 1070 x64 version Which core/mem settings do you use? 1860/4400 temp 69~72 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 11:33:01 AM No, I love those wattage and temp monitoring in x64 builds so x86 build is not for me )) And my binary is only 20mb ... yours is 37 ... why? Static lib linkage and piece of debug information. I can make it lighter, but I don't think binary size matters, especially when source is open. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stolarzz on October 06, 2017, 11:33:26 AM 32mh 6x 1080ti Aorus +100 core, +300 mem, power limit 75%
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 06, 2017, 11:50:00 AM CPU#2:GeForce GTX 1070, 2727.58kH/s
CPU#2:GeForce GTX 1070, 0.034MH/W, 0.0017MH/Mhz CPU#2:GeForce GTX 1070, 61C(F:33%) 1574/4201MHz(81W) looks good? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: btcman1 on October 06, 2017, 11:56:42 AM With Stock settings win10 x64:
EVGA GTX 1070 [2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 3106.90kH/s [2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 0.025MH/W, 0.0017MH/Mhz [2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 69C(F:49%) 1826/3802MHz(122W) KFA2 gtx 1080 [2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 3820.32kH/s [2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 0.02MH/W, 0.0021MH/Mhz [2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 81C(F:78%) 1859/4513MHz(188W) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: percy_tc on October 06, 2017, 11:57:01 AM Is there any way to get a bulited, runable version on Win 10 x64?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vivik on October 06, 2017, 11:57:12 AM CPU#2:GeForce GTX 1070, 2727.58kH/s CPU#2:GeForce GTX 1070, 0.034MH/W, 0.0017MH/Mhz CPU#2:GeForce GTX 1070, 61C(F:33%) 1574/4201MHz(81W) looks good? You use your video cards very carefully ;) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 11:59:29 AM Is there any way to get a bulited, runable version on Win 10 x64? Chech krnlx github, Releases section Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rednoW on October 06, 2017, 12:19:10 PM With Stock settings win10 x64: EVGA GTX 1070 [2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 3106.90kH/s [2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 0.025MH/W, 0.0017MH/Mhz [2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 69C(F:49%) 1826/3802MHz(122W) KFA2 gtx 1080 [2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 3820.32kH/s [2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 0.02MH/W, 0.0021MH/Mhz [2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 81C(F:78%) 1859/4513MHz(188W) palit gamerock gtx1080 60%tdp 109W 4mH/s Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vivik on October 06, 2017, 12:45:19 PM Krnlx,
Under CUDA8.0 difficult to adapt? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 01:08:36 PM Krnlx, Under CUDA8.0 difficult to adapt? You can build it with 7.5, 8.0 or 9.0 without any problem. Code is friendly to CUDA version bump. 9.0 is significantly faster than 8.0, didn't measure against 7.5. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: e6ug on October 06, 2017, 01:09:11 PM Thanks for the miner!
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: mikebzh44 on October 06, 2017, 01:27:23 PM Anyone to give GTX 1060 6 Gb hashrate ?
Thanks. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 06, 2017, 01:42:06 PM Mining since yesterday night and Xevan pay not so much : just a little more than Dagger-Hashimoto in dual mode ith nVidia GPUs.
I'm a little disappointed Otherwise, good devs work : the miner was runing all the night and no problem with differents GPUs. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: anorganix on October 06, 2017, 01:51:50 PM Anyone to give GTX 1060 6 Gb hashrate ? Thanks. Check stats (http://yiimp.ccminer.org/bench?algo=xevan&chip=46) on YiiMP. You should get between 2 - 2.4 MH/s depending on your settings. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: mikebzh44 on October 06, 2017, 01:53:14 PM Thanks.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 06, 2017, 01:59:41 PM krnlx, great work! 8) thank you.
I will try your miner soon. regardless of profitability it will be good addition to miners family. Keep going! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 06, 2017, 02:39:54 PM Krnlx, Under CUDA8.0 difficult to adapt? You can build it with 7.5, 8.0 or 9.0 without any problem. Code is friendly to CUDA version bump. 9.0 is significantly faster than 8.0, didn't measure against 7.5. where to find the 9.0 binary? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Gaglam on October 06, 2017, 02:42:04 PM Mining since yesterday night and Xevan pay not so much : just a little more than Dagger-Hashimoto in dual mode ith nVidia GPUs. I'm a little disappointed Otherwise, good devs work : the miner was runing all the night and no problem with differents GPUs. thats the problem, i'm also back to ZEC :D but great miner anyway Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: MarcusDe on October 06, 2017, 03:10:52 PM Good work, I was waiting for this long time :-)
12MH on 6x 1060 3GB rig. Problem is it's far less profitable mining bitsend than using that rig on nicehash :-/ Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 03:15:50 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: abudfv2008 on October 06, 2017, 03:19:46 PM ccminer_x86 looks faster
1060 6Gb ~2500 1070 ~3500 1080 ~4350 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: car1999 on October 06, 2017, 03:20:10 PM Krnlx, You can build it with 7.5, 8.0 or 9.0 without any problem. Code is friendly to CUDA version bump. 9.0 is significantly faster than 8.0, didn't measure against 7.5.Under CUDA8.0 difficult to adapt? can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig? upgrading all my rigs from cuda8 to cuda9 isn't a trivial work, a rig is dead during the upgrade, it cannot boot. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 03:22:16 PM can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig? All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. Ooops, you use *nix or Win? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Ryuh on October 06, 2017, 03:27:02 PM Finally miner for xevan, great job guys. Thank you for the hard work!
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: car1999 on October 06, 2017, 03:28:32 PM can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig? All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. I use ubuntu 16, nvOC. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 03:52:24 PM can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig? All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. I use ubuntu 16, nvOC. For *nix it will be a problem (running without reboot), if you already have recent drivers installed, you can ask someone to build binary for you and just update, but if you need to update driver or want to install toolkit and build from scratch - as I know you'll need to reboot at least 1 time. If access is only remote it's quite risky, especially regarding driver module update. CPU matters, so if you want to build it for all variety of hardware you need to remove "-march=native" flag from configure.sh file. P.S: I'm not so experienced in *nix, it's just what I remember Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: car1999 on October 06, 2017, 04:36:27 PM can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig? All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. I use ubuntu 16, nvOC. For *nix it will be a problem (running without reboot), if you already have recent drivers installed, you can ask someone to build binary for you and just update, but if you need to update driver or want to install toolkit and build from scratch - as I know you'll need to reboot at least 1 time. If access is only remote it's quite risky, especially regarding driver module update. CPU matters, so if you want to build it for all variety of hardware you need to remove "-march=native" flag from configure.sh file. P.S: I'm not so experienced in *nix, it's just what I remember Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 06, 2017, 05:35:20 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. So weird that the one on github does not get flagged up as a virus but this one does? (false positive, I know) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stzcze on October 06, 2017, 05:46:38 PM Good job!!! Thx
1060 tdp 70 core +150 mem -500 13,66 6x1060 6gb -i 21 latest driver, x86 cuda 9 build, w10 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 06, 2017, 05:49:44 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. So weird that the one on github does not get flagged up as a virus but this one does? (false positive, I know) It's packed, so it gets flagged. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 06, 2017, 05:53:57 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. So weird that the one on github does not get flagged up as a virus but this one does? (false positive, I know) It's packed, so it gets flagged. I'm obviously not questioning your integrity but found it a bit strange. Is the one github not packed? Have you introduced a fee by any chance? Thanks for your time. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: startsts on October 06, 2017, 05:56:07 PM Maximum result that I could get, seems very profitable :)
GPU#0:MSI GTX 1060 3GB, 2178.23kH/s Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vivik on October 06, 2017, 05:56:19 PM CUDA 9.0 x86 - 8x1070 28Mh
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 06, 2017, 06:01:08 PM anybody can tell me what I am doing wrong?
When I start the miner with altminer config like this: Code: ccminer_x86 -a xevan -o stratum+tcp://eu1.altminer.net:3739 -u Vo...Z -p c=VSX Code: [2017-10-06 13:59:06] Starting on stratum+tcp://eu1.altminer.net:3739 WTF??? coin code is correct, wallet address is correct, startum address is correct, so why it complains??? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stzcze on October 06, 2017, 06:02:31 PM Gigabyte GTX 1080 Ti, 5243.33kH/s
Gigabyte GTX 1080, 3855.18kH/s cuda 9 build x86 tdp 65 -i 21 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 06, 2017, 06:22:16 PM Gigabyte GTX 1080 Ti, 5243.33kH/s Gigabyte GTX 1080, 3855.18kH/s cuda 9 build x86 tdp 65 -i 21 cude 9 build x86 (thank god for windows defender...) tdp 73 -i 21 5x 1070 @ 15.28Mh/s Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vorona34 on October 06, 2017, 08:01:23 PM Maximum result that I could get, seems very profitable :) GPU#0:MSI GTX 1060 3GB, 2178.23kH/s Long works? I have a miner inevitably die after 1 minute or after 5 , depending on the intensity. Dropped to 14 could not wait for fall, but normal speed not seen ))) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: arity on October 06, 2017, 08:19:46 PM On linux with CUDA 9 & compile with sm61, 6x1080ti (each power limit 170w) reported hash rate is 30Mh/s. Default intensity.
According to whattomine that hash rate should yield about 1.47 BSD per hour, but the actual shown on pool earning is only 0.8 BSD. Tested on suprnova pool. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: th3.r00t on October 06, 2017, 08:29:03 PM anybody can tell me what I am doing wrong? Did you set the intensity manually?When I start the miner with altminer config like this: Code: ccminer_x86 -a xevan -o stratum+tcp://eu1.altminer.net:3739 -u Vo...Z -p c=VSX Code: [2017-10-06 13:59:06] Starting on stratum+tcp://eu1.altminer.net:3739 WTF??? coin code is correct, wallet address is correct, startum address is correct, so why it complains??? Quote UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti As far as I see the answer is no. There may be your problem.Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: buzzkillb on October 06, 2017, 08:37:17 PM 1080 hashrate. not ti.
Code: [S/A/T]: 0/151/151, diff: 0.065, 3794.39kH/s yes! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: integrale on October 06, 2017, 08:40:12 PM Your great Work resulted :
Xubuntu 16.04 LTS Cuda 9 Nv 384.90 i=20.25 Code: [2017-10-06 22:35:34] GPU#0:NONCE FOUND thx Guys for The Miner Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: blackhorse7 on October 06, 2017, 08:47:34 PM Windows x64 version, EVGA GTX 1060 + 80 / + 500 / 84% tdp (I didnt change intensity, worked on default = 20): 2240kh/s in benchmark mode.
It works, thank you Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: buzzkillb on October 06, 2017, 11:20:29 PM It's alexis78 base, optimised for cuda 7.5, so it should be faster. Try x86 build, it's generally faster in CUDA8 not specifically optimised case, or build your own binaries, experiment ;) No, I love those wattage and temp monitoring in x64 builds so x86 build is not for me ))And my binary is only 20mb ... yours is 37 ... why? How do you check wattage and temp on ccminer???? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 06, 2017, 11:43:06 PM Did you set the intensity manually? Quote UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti As far as I see the answer is no. There may be your problem.yes, I did: Quote ccminer -a xevan -i 20 -o stratum+tcp://eu1.altminer.net:3739 -u Vo...Z -p c=VSX the same result. I use 1070.Update: something wrong with my wallet. If I use the wallet id from any recorded transaction, it works! but any addresses from my wallet - they look like invalid for the pool. Any ideas??? I use VSYNC wallet v1.2.3.0-g32a928e Update: crap, apparently there are two VSYNCs! Downloaded another VSync v 1.0.0.1 and synchronizing... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: spider703 on October 06, 2017, 11:57:26 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 07, 2017, 12:24:43 AM finally... the wallet has been synchronized and the miner does work. 6 x 1070 ~ 20 MH/s
Profitability is about like for BTX/VIVO. Not too bad, but still less than my favorite coin ;) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: fr4nkthetank on October 07, 2017, 02:22:48 AM the coins are pretty small so expect profitability to stabilize around average profitability...its kinda sad to be honest. Heres hoping to see a new ZCash some day with a new algo :)
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: car1999 on October 07, 2017, 02:36:23 AM the coins are pretty small so expect profitability to stabilize around average profitability...its kinda sad to be honest. Heres hoping to see a new ZCash some day with a new algo :) I mined and hold 20k SIGT, but it is going to die. So I think holding small coin is risky, now I exchange BSD to BTC daily. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 07, 2017, 04:52:25 AM the coins are pretty small so expect profitability to stabilize around average profitability...its kinda sad to be honest. Heres hoping to see a new ZCash some day with a new algo :) I mined and hold 20k SIGT, but it is going to die. So I think holding small coin is risky, now I exchange BSD to BTC daily. Oh, good old sigt. Worthless I've been mining Bitsend all night long on suprnova but my balance is still not confirmed. Does it really take so long? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 07, 2017, 05:19:35 AM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. So weird that the one on github does not get flagged up as a virus but this one does? (false positive, I know) It's packed, so it gets flagged. I'm obviously not questioning your integrity but found it a bit strange. Is the one github not packed? Have you introduced a fee by any chance? Thanks for your time. No fees, it's krnlx code, it's opensource and should stay free. I've just packed executables to take less space on my mega.nz, I keep quite big data there, so space matters in this case, even 50 mb :D One on github is not packed. P.S: don't run miner on yiimp with "-p stats" option, it will fail just after pool asks for stats. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ZenFr on October 07, 2017, 07:25:25 AM Can you put a version number in the source code and the name of this topic ?
It's will be easier to understand for the future of this good program. I have made a lot of try, but I still not fund a very profitable setting with xevan mining (GTX 1070). Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 07, 2017, 08:02:13 AM Can you put a version number in the source code and the name of this topic ? What do you consider very profitable? I didn't expect it to make 50 bucks a day.It's will be easier to understand for the future of this good program. I have made a lot of try, but I still not fund a very profitable setting with xevan mining (GTX 1070). Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: NameTaken on October 07, 2017, 08:04:53 AM It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 07, 2017, 08:18:20 AM It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit You're absolutely right, even last night it was more profitable than this morning. Amazing...Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vcxz on October 07, 2017, 08:55:14 AM It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit You're absolutely right, even last night it was more profitable than this morning. Amazing...Diff have come up 2x compare with last week. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: kollom on October 07, 2017, 10:47:06 AM Inno3D GTX1080 PL 80
CUDA 8 x64 3476H/s 66C (F;65%) ) 1640/ 4513 MHz (127W) CUDA 9 x64 3700H/s 66C (F;65%) ) 1640/ 4513 MHz (127W) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vivik on October 07, 2017, 11:36:00 AM CUDA 9 x86 the fastest.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 07, 2017, 12:53:27 PM hm, significant difference. Is there compiled CUDA 9 x86 binary available? The published one was compiled with CUDA 8.0.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ..XyZ.. on October 07, 2017, 01:06:40 PM hm, significant difference. Is there compiled CUDA 9 x86 binary available? The published one was compiled with CUDA 8.0. 8 posts above:https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: blackhorse7 on October 07, 2017, 01:08:05 PM x86 version is faster (2350 vs 2240kh/s = ~5%), but with stats option on zpool it's crashing after 'pool asked for stats' line. x64 version didnt crash
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 07, 2017, 01:38:46 PM x86 version is faster (2350 vs 2240kh/s = ~5%), but with stats option on zpool it's crashing after 'pool asked for stats' line. x64 version didnt crash What's even funnier is that CUDA9 makes all the other algo's work faster as well. My 5x 1070 rig went from 131mh to 142mh when mining lyra2v2. @palgin, again, thanks for your contribution. Is this what SP_ does with his releases? XD Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: blackhorse7 on October 07, 2017, 01:47:45 PM omg, 20 tests again...
Thak you guys for coding! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: startsts on October 07, 2017, 03:39:58 PM What multiplier has xevan algo? 24 ????
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 07, 2017, 04:39:34 PM hm, significant difference. Is there compiled CUDA 9 x86 binary available? The published one was compiled with CUDA 8.0. 8 posts above:https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: abudfv2008 on October 07, 2017, 04:48:51 PM What's even funnier is that CUDA9 makes all the other algo's work faster as well. My 5x 1070 rig went from 131mh to 142mh when mining lyra2v2. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: UrsaUrsa on October 07, 2017, 04:55:45 PM What's even funnier is that CUDA9 makes all the other algo's work faster as well. My 5x 1070 rig went from 131mh to 142mh when mining lyra2v2. And that's how I realised that one of my cards was not working... I think I'm overstretching that one 750W PSU. Gotta buy another one. However even now I'm only getting 179mh. What settings are you using? EDIT: i-21 gets it up to 185mh. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: fhakenzz on October 08, 2017, 12:49:43 AM hi, I keep on gettin this error
Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 871 : unspecified launch failure. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Littledragons on October 08, 2017, 01:08:58 AM Thanks so much for your work!
I really do appreciate that! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 08, 2017, 05:07:05 AM hi, I keep on gettin this error Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 871 : unspecified launch failure. Precompiled binary? Intensity is too high, I suppose. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vorona34 on October 08, 2017, 05:37:05 AM Hello. Marking with "target 0 ff ff000000" correct or is it a mistake?
[2017-10-08 08:32:17] GPU#1:target 0 ff000000 ff [2017-10-08 08:32:17] GPU#1:target ffff000000 [2017-10-08 08:32:20] GPU#1:target 0 ff000000 ff [2017-10-08 08:32:20] GPU#1:target ffff000000 [2017-10-08 08:32:20] GPU#2:target 0 ff000000 ff [2017-10-08 08:32:20] GPU#2:target ffff000000 [2017-10-08 08:32:20] GPU#0:target 0 ff000000 ff [2017-10-08 08:32:20] GPU#0:target ffff000000 [2017-10-08 08:32:22] GPU#2:target 0 ff000000 ff [2017-10-08 08:32:22] GPU#2:target ffff000000 http://joxi.ru/xAe80qzhp8dP12 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 08, 2017, 05:55:00 AM Hello. Marking with "target 0 ff ff000000" correct or is it a mistake? [2017-10-08 08:32:17] GPU#1:target 0 ff000000 ff [2017-10-08 08:32:17] GPU#1:target ffff000000 [2017-10-08 08:32:20] GPU#1:target 0 ff000000 ff [2017-10-08 08:32:20] GPU#1:target ffff000000 [2017-10-08 08:32:20] GPU#2:target 0 ff000000 ff [2017-10-08 08:32:20] GPU#2:target ffff000000 [2017-10-08 08:32:20] GPU#0:target 0 ff000000 ff [2017-10-08 08:32:20] GPU#0:target ffff000000 [2017-10-08 08:32:22] GPU#2:target 0 ff000000 ff [2017-10-08 08:32:22] GPU#2:target ffff000000 http://joxi.ru/xAe80qzhp8dP12 Shares accepted, so seems OK Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vorona34 on October 08, 2017, 05:59:28 AM Miner on 1060 constantly closed, even with the intensity of 14 so all is not OK.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: palgin on October 08, 2017, 06:11:21 AM Miner on 1060 constantly closed, even with the intensity of 14 so all is not OK. Dear sir, you got miner for free, we were hard working chasing rare bug for win build while you were sitting on your sofa, and now you're complaining something? Go ask _sp to sell you same code for 200$, told already that miner will fail in 2 cases: 1) High overclock 2) -p stats option I won't comment anymore, as stuff like this drives me angry. AS-IS, roll-roll your boat gently down the stream. P.S: coвceм oxpeнeли yжe, пoтoмy krnlx ничeгo и нe кoммeнтиpyeт, тaк кaк люди пopoй пpeвpaщaютcя в cвинeй, пoлyчили ПO нaxaлявy, eщe и пpeтeнзии имeют. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vorona34 on October 08, 2017, 06:41:59 AM Cпacибo зa пoмoщь и paзpaбoткy мaйнepa. Я нe имeю пpeтeнзий, a ищy peшeниe пpoблeмы. Ha cчeт "-p" я пpoпycтил.
Bидимo, Bы нe пoняли цeли мoeгo cooбщeния, и нe xoтeли нaзвaть мeня cвиньeй, пoэтoмy я нe cтaнy пocылaть Bac нa *yй. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rednoW on October 08, 2017, 07:28:07 AM Russian battle )))
Ok, I decided to post my cuda 7.5 x64 build If someone wants he can compare speed with fastest cuda 9 x86 build and post the results. https://drive.google.com/open?id=0B4flkNGCHIGFa1BQTzEzaUFmaDA Disclaimer: This was build on my main notebook with a lot of shitcoin wallets so I cannot guarantee it is virus-safe. Use on your own risk. Update: Just compared my build with palgin's cuda 9 x86 build. Palgin's faster by 100khs on gtx1070 100% tdp. So no need to download my version )) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: fhakenzz on October 08, 2017, 07:46:20 AM hi, I keep on gettin this error Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 871 : unspecified launch failure. Precompiled binary? Intensity is too high, I suppose. lowered my intensity to 18 and OC seems find now., will post again if it crashes., but RN been running for 6 hours straight Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: spider703 on October 08, 2017, 09:56:25 AM Miner on 1060 constantly closed, even with the intensity of 14 so all is not OK. Dear sir, you got miner for free, we were hard working chasing rare bug for win build while you were sitting on your sofa, and now you're complaining something? Go ask _sp to sell you same code for 200$, told already that miner will fail in 2 cases: 1) High overclock 2) -p stats option I won't comment anymore, as stuff like this drives me angry. AS-IS, roll-roll your boat gently down the stream. P.S: coвceм oxpeнeли yжe, пoтoмy krnlx ничeгo и нe кoммeнтиpyeт, тaк кaк люди пopoй пpeвpaщaютcя в cвинeй, пoлyчили ПO нaxaлявy, eщe и пpeтeнзии имeют. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: spider703 on October 08, 2017, 09:57:52 AM Cпacибo зa пoмoщь и paзpaбoткy мaйнepa. Я нe имeю пpeтeнзий, a ищy peшeниe пpoблeмы. Ha cчeт "-p" я пpoпycтил. Гyгл пepeвeдoчик oднaкo!!! я тoжe тaк пapy paз пpoлeтeл, кoгдa пишeшь oднo, a oн мнe o coвceм дpyгoм пepeвoдитBидимo, Bы нe пoняли цeли мoeгo cooбщeния, и нe xoтeли нaзвaть мeня cвиньeй, пoэтoмy я нe cтaнy пocылaть Bac нa *yй. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: spider703 on October 08, 2017, 10:02:40 AM Russian battle ))) This is for AMD card?Ok, I decided to post my cuda 7.5 x64 build If someone wants he can compare speed with fastest cuda 9 x86 build and post the results. https://drive.google.com/open?id=0B4flkNGCHIGFa1BQTzEzaUFmaDA Disclaimer: This was build on my main notebook with a lot of shitcoin wallets so I cannot guarantee it is virus-safe. Use on your own risk. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rednoW on October 08, 2017, 10:36:35 AM Russian battle ))) This is for AMD card?Ok, I decided to post my cuda 7.5 x64 build If someone wants he can compare speed with fastest cuda 9 x86 build and post the results. https://drive.google.com/open?id=0B4flkNGCHIGFa1BQTzEzaUFmaDA Disclaimer: This was build on my main notebook with a lot of shitcoin wallets so I cannot guarantee it is virus-safe. Use on your own risk. It is ccminer )) It is CUDA. It is for nVidia )) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 08, 2017, 12:13:36 PM What are you guys getting with the free opensorce miner on the gtx 1060 and 1070?
but what about the 1070. 1060 6g and 1060 6gb? Here are some preresults. xevan sp-mod 1 (100% tdp) 1. gtx 1070 g1 gaming (3850 KHASH) 2. gtx 1060 windforce 6gb (2550 KHASH) 2. gtx 1060 gainward 3gb (2420 KHASH) https://i.imgur.com/s4YPvOC.png Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Leass on October 08, 2017, 12:35:16 PM Miner on 1060 constantly closed, even with the intensity of 14 so all is not OK. Dear sir, you got miner for free, we were hard working chasing rare bug for win build while you were sitting on your sofa, and now you're complaining something? Go ask _sp to sell you same code for 200$, told already that miner will fail in 2 cases: 1) High overclock 2) -p stats option I won't comment anymore, as stuff like this drives me angry. AS-IS, roll-roll your boat gently down the stream. P.S: coвceм oxpeнeли yжe, пoтoмy krnlx ничeгo и нe кoммeнтиpyeт, тaк кaк люди пopoй пpeвpaщaютcя в cвинeй, пoлyчили ПO нaxaлявy, eщe и пpeтeнзии имeют. Thanks for Your work Palgin (&Krnlx)! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 08, 2017, 01:42:47 PM Krnlx, Palgin, thank you for your hard work!
Your miner works very stable at my 1070 rigs. 8) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 08, 2017, 01:51:31 PM What are you guys getting with the free opensorce miner on the gtx 1060 and 1070? 1. gtx 1070 g1 gaming (3850 KHASH) gtx 1070 ASUS Strix O8G - 3475 KHASH/s Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: FQ_Neronk on October 08, 2017, 02:26:07 PM What are you guys getting with the free opensorce miner on the gtx 1060 and 1070? 1. gtx 1070 g1 gaming (3850 KHASH) gtx 1070 ASUS Strix O8G - 3475 KHASH/s GTX 1070 Gainward - 3625.05 KHASH/s Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: kollom on October 08, 2017, 03:31:28 PM Krnlx, Palgin really good work, thanks.
sp_ is fat troll ;D Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: santan on October 08, 2017, 06:12:31 PM Great Work!!!! krnlx and Thanks a lot to palgin for serious bug hunting and giving us free Windows build.
This time i tried to compile on CUDA8 and got 1322 errors on VS13, got so terrified that closed Visual Studio immediately. Maybe because i am compiling on a very old Laptop. Anyway, Keep up the good work... You guys are the real Hope for the future.... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: k0stas on October 08, 2017, 06:50:25 PM What are you guys getting with the free opensorce miner on the gtx 1060 and 1070? but what about the 1070. 1060 6g and 1060 6gb? Here are some preresults. xevan sp-mod 1 (100% tdp) 1. gtx 1070 g1 gaming (3850 KHASH) 2. gtx 1060 windforce 6gb (2550 KHASH) 2. gtx 1060 gainward 3gb (2420 KHASH) https://i.imgur.com/s4YPvOC.png I have not play much with my card 1060 3GB i am getting this results if you intresting https://s5.postimg.org/b0dbwdbyf/Screenshot_from_2017-10-08_21-43-30.png Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: majorlee on October 08, 2017, 07:34:39 PM where can we D/L the win version?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on October 08, 2017, 08:26:35 PM https://i.imgur.com/TMfK07f.png
Rates for 1080 and 1080 TI. Any ideas on how to increase to reach 6mh? Or are my rates ok? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on October 08, 2017, 08:54:00 PM Bitsend(XEVAN) can be sold, and profit is declining from day to day.
In this thread klrx wrote that the miner does 3.3MHASH on the 1070. I am making a miner that does more than 4MHASH on the gtx 1070. This is the number you need to mine with a profit right now.. https://i.imgur.com/JBMSIjx.png current profit 24hours of mining: 3.3Mhash =(0.08774*0.0033)=0,00026322btc= $1.2 4Mhash =(0.08774*0.004)=0,00035096btc= $1.6175 https://i.imgur.com/VdZdAKf.png Here is the nicehashminer profit calculator 24 hours: $1.62 https://i.imgur.com/i7zrkoE.png Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ShowMeCoins on October 09, 2017, 07:45:07 AM Bitsend(XEVAN) can be sold, and profit is declining from day to day. In this thread klrx wrote that the miner does 3.3MHASH on the 1070. I am making a miner that does more than 4MHASH on the gtx 1070. This is the number you need to mine with a profit right now.. Dear '_sp', I'm a small miner, pushing/punishing my cards to maximize output. Given your long history on this board, you've probably forgotten how long it takes to gather a .5 Bitcoin profit. Every time you post a comment regarding all the worderfull things you can do as a developer, I get sad :(. Personally I fully understand the reasons for asking compensation for your efforts, but why not using the already common practice of a devfee. Make 2 versions: a commerce version (devfree) and a non-commerce version (devfee). Looking at the numbers you are presenting, I'm seeing an increase in output of about 20%. I wouldn't mind sharing this increase 50/50. The devfee could be as much as 5-8%. Doing a 5% devfee calculation on 3 popular xevan pools using krnlx-xevan as a reference: Yiimp: 858.5 MH/s x 5% = 42,925 MH/s Zpool: 763,1 MH/s x 5% = 38.155 MH/s Altminer: 980.2MH/s x 5% = 49,01 MH/s ---------------------------------------------- + 130,09 MH/s (= 0.08774*0.13009=0,0114140966btc = $ 52,24) Just wondering what could be achieved if the 3 main contributors would work together, using the devfee as a common account for all developers need (like hardware, office space, hosting costs, etc.). We are talking about just one algo here, add equihash to the equation and income could be 5 times (just speculating) the amount. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: aloneforever on October 09, 2017, 10:59:54 AM Code: [2017-10-09 13:52:05] reject reason: low difficulty share of 0.0000030442944267742225 3x1080 TI ,Win x64 , Cuda 9 . What i wrong>? Tnx Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: tpd09 on October 09, 2017, 11:44:31 AM https://image.ibb.co/kU0qkb/Capture.jpg (https://imgbb.com/)
tried compiling with cuda 9 on visual studio 2017 - but I get this error any help would be great Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: gcvanasel on October 09, 2017, 12:46:44 PM Has anyone mined Solaris yet? Whould like to know how the Nvidia cards are performing and what your profitability is?
https://bitcointalk.org/index.php?topic=1831629.0 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 09, 2017, 01:53:37 PM Dear '_sp', Absolutely agree. Also _sp is not right about profitability. Since I made a script that calculates earning, it clearly shows that free miner for VSYNC is more profitable than his miner for Bitcore (that he advertises a lot!).I'm a small miner, pushing/punishing my cards to maximize output. Given your long history on this board, you've probably forgotten how long it takes to gather a .5 Bitcoin profit. Even for the same coin it requires pretty long time to recover miner price for a small miner. Otherwise it looks we work for _sp :P I appreciate his work but let's see the truth. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: hous26 on October 09, 2017, 02:02:34 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. Is this a windows version? I'm interested in mining this algo! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Cortez7575 on October 09, 2017, 05:05:06 PM Solo mining is not possible this algo? I tried several xevan coins, but dont work either.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: bodrumair on October 09, 2017, 09:09:03 PM What is the suggested intensity for P106 ( GTX 1060 6GB) with Krnlx Nvidia xevan miner?
Currently I used İ 21 and my hasrate is 2230 approximately. it seems low I think Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stzcze on October 09, 2017, 09:33:06 PM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. Is this a windows version? I'm interested in mining this algo! Yes, it's a windows version, why do not you read what people are writing here? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on October 10, 2017, 01:22:10 PM All I can say is that I mine Xevan right now.. Most profitable for me.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: olek82 on October 11, 2017, 03:39:19 PM Solo mining is not possible this algo? I tried several xevan coins, but dont work either. ive also tried solo mining but without luck. i think we need the --no-getwork command to mine solo... here are my stats with my gtx1080 https://imgur.com/Ndw2dwe Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Mozzus on October 13, 2017, 05:28:22 PM is supernova pool up ?> i used the new mier for windows and i am not able to mine on supernova this ios how my bat file looks --> ccminer -a xevan -o stratum+tcp://bsd.suprnova.cc:8686 -u Injaabs.slave1 -p x -i 19
pause do i do something wrong ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: junforever on October 13, 2017, 10:31:35 PM Hi which pool do you recommend to mine bitsend? Thanks
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: junforever on October 14, 2017, 02:17:59 AM All I can say is that I mine Xevan right now.. Most profitable for me. Which coin are you mine ?Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Elder III on October 14, 2017, 02:53:16 AM Hi which pool do you recommend to mine bitsend? Thanks Yiimp is good for BitSend. You can also check out Zpool and Suprnova for a couple other bigger pools. There are some small ones too but they may take awhile to find blocks unless you have a number of rigs to point at it. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Aureliusy on October 14, 2017, 08:02:15 AM Running the windows version Xevan algo (on 4GB 64 bit Win10 with G3900) , but it seems to crash within 24 hrs
Always with: quark_blake512_cpu_setBlock80 at line 871 an illegal memory access was encountered EDIT 15/10 Did switch to the x86 windows miner. More hash and more stability (no crash) Same GPU settings. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: santan on October 14, 2017, 09:18:10 AM Hi which pool do you recommend to mine bitsend? Thanks http://yiimp.ccminer.org/ Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: konqueror on October 14, 2017, 09:25:21 AM Running the windows version Xevan algo (on 4GB 64 bit Win10 with G3900) , but it seems to crash within 24 hrs Always with: quark_blake512_cpu_setBlock80 at line 871 an illegal memory access was encountered Too much overclock? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: junforever on October 15, 2017, 04:39:57 AM Hi which pool do you recommend to mine bitsend? Thanks Yiimp is good for BitSend. You can also check out Zpool and Suprnova for a couple other bigger pools. There are some small ones too but they may take awhile to find blocks unless you have a number of rigs to point at it. Thanks for the advice Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: junforever on October 15, 2017, 04:42:39 AM Anyone can help me with the info of which approximately is the daily profit to mine bitsend with nvidia gtx 1080ti? Thanks
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Alex68 on October 15, 2017, 11:56:31 AM Any ready binary available for Ubuntu 14.04 and cuda 8.0? Thanks!
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: gcvanasel on October 17, 2017, 11:09:28 AM Hi All,
What is your OC settings for 1070 cards? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: joshuaj on October 17, 2017, 01:52:06 PM It is good that xevan no longer cpu mining and support nvidia now. Thanks krnlx
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: fhakenzz on October 19, 2017, 12:33:03 PM Hi All, What is your OC settings for 1070 cards? go for a little 100+ core and -500 memory coz its more of core intensive algo Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sergey777 on October 20, 2017, 07:14:35 AM where to find the 9.0 binary? https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w (https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w) CUDA 9 built project, feel free to test. Start with intensity 18. Is this a windows version? I'm interested in mining this algo! Yes, it's a windows version, why do not you read what people are writing here? cтpaннo, нo нa Win7 64bit CUDA 9 ccminer_x86 быcтpee, чeм ccminer_x64 пpимepнo нa 0,17 MH/s 3x1060 3Gb нa ccminer_x64 выдaют пpимepнo 6600 MH/s 3x1060 3Gb нa ccminer_x86 выдaют пpимepнo 6770 MH/s Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: buzzkillb on October 20, 2017, 09:28:24 AM Anyone figured out how to get this to solomine?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: loatchoat on October 21, 2017, 02:08:44 AM Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on October 21, 2017, 01:15:46 PM You must to reduce your intensity. Set it like -i 20
It must help you. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on October 21, 2017, 01:24:44 PM 1x 1080 Ti + 1x 1080: 9920 MH/s :)
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: loatchoat on October 21, 2017, 02:03:16 PM You must to reduce your intensity. Set it like -i 20 It must help you. Thank you for your support ! I tried with -i 14, 15, 16, 20, 24 but all have the same result (dump ) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: konqueror on October 21, 2017, 03:16:00 PM 1x 1080 Ti + 1x 1080: 9920 MH/s :) MH/s or KH/s? ::) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on October 22, 2017, 02:35:08 PM 1x 1080 Ti + 1x 1080: 9920 MH/s :) MH/s or KH/s? ::) Oops.. There's the wodka again. 9,92 MH/S, 9920 KH/s of course. :) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rmd73 on October 22, 2017, 06:21:34 PM I noticed that the miner will compile only for compute arch 52 and 50...
If one removes the comments for compute arch 35 and 30 (and, of course 20) in Makefile.am, the compilation will fail. Tested on Ubuntu 14.04 with CUDA 7.5 and CUDA 8. I wanted to experiment mining xevan with older and weaker card(s): an old 570 gtx and a geforce 730... rentability NOT considered :D Any clues? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: madmack1 on October 22, 2017, 07:35:34 PM got this miner compiled in ubuntu 16.04 hitting 5600Khs on VXS is this good for a 1080ti?
i dont overclock everything is standard apart from fan speed Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Elder III on October 22, 2017, 07:46:49 PM got this miner compiled in ubuntu 16.04 hitting 5600Khs on VXS is this good for a 1080ti? i dont overclock everything is standard apart from fan speed I'm on Windows 10, so I can't say for sure in regards to linux, but I think you're speed is about right. I get 5200-5400 for Xevan per GTX 1080 Ti, depending on the overclock, at 80% power limit. I've seen reports of people being close to 6000, but I think that is both Overclocked and at full power limit. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: loatchoat on October 24, 2017, 05:14:01 PM Does anyone know why ccminer xevan 32b mine at hashrate higher than 64b?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: brownfly on October 25, 2017, 03:14:06 AM probably because the x64 version has overhead in terms of memory management and it is slower because of that?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: loatchoat on October 25, 2017, 06:49:35 AM probably because the x64 version has overhead in terms of memory management and it is slower because of that? So what does ccminer for 64b do? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: adam1230 on October 25, 2017, 10:31:46 AM I just start to test xevan miner. Everything works on my end. Need some mods to get more hashrate but its good that there is no dev fee in this miner.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Makak4R on October 25, 2017, 10:42:20 AM I just start to test xevan miner. Everything works on my end. Need some mods to get more hashrate but its good that there is no dev fee in this miner. just wait! soon there will be a version from SP. not for free of course, for a small bonus you'll get some 10-20% improvements ::) no, I do not say that SP is not right, i'm just curious why versions from SP with new algos appears after free version miner has been released? 8) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: madmack1 on October 25, 2017, 10:51:27 AM how do you show GPU temps in this miner?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Mike011 on October 25, 2017, 06:16:56 PM Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Elder III on October 25, 2017, 08:20:41 PM Could you elaborate? Are you saying that the hashrate is more then you expected for that power limit, or that you would run it at a lower power limit and still get that hashrate? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: fhakenzz on October 31, 2017, 04:37:14 AM hi, been follwing this thread., are there any significant upgrades or updates about this miner?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: rmd73 on November 01, 2017, 06:02:41 AM hi, been follwing this thread., are there any significant upgrades or updates about this miner? https://github.com/krnlx/ccminer-xevanLook at the dates and wait for sp_ to "release" a "vastly improved and thoroughly corrected miner" ;) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on November 05, 2017, 01:55:24 PM got this miner compiled in ubuntu 16.04 hitting 5600Khs on VXS is this good for a 1080ti? i dont overclock everything is standard apart from fan speed I'm on Windows 10, so I can't say for sure in regards to linux, but I think you're speed is about right. I get 5200-5400 for Xevan per GTX 1080 Ti, depending on the overclock, at 80% power limit. I've seen reports of people being close to 6000, but I think that is both Overclocked and at full power limit. Been mining Xevan for a few weeks now. Using Windows 10. - Asus STRIX 1080 Ti: 5818.11 - MSI 1080 Gaming Plus (11 Gbps): 4078.85 Little bit clocked. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stevascha on November 10, 2017, 11:12:57 AM doing good, my aorus extreme get 6mhs, thanks alot!!
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on November 10, 2017, 01:37:12 PM doing good, my aorus extreme get 6mhs, thanks alot!! Wow. 1080 ti or just 1080? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: oktoshiimin on November 14, 2017, 03:15:28 PM need some help here, i got this error
Code: In file included from bignum.cpp:8:0: when try to compiling build.sh in ubuntu, can some one guide me to fix it? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on November 14, 2017, 03:34:58 PM Look at the dates and wait for sp_ to "release" a "vastly improved and thoroughly corrected miner" ;) I have already made a faster private xevan miner. A rewrite of groestl and simd gave a 10% speedup. I don't want to give it away cheap. (0.05btc). Some of you have disassembled my code and see that I use a new shuffle instruction. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vispilio on November 16, 2017, 04:00:27 AM is it now better to mine with this new improved miner on a 1080 ti compared to mining ZCASH with it, what is the cash value of 6mh mining power / month / card ?..
What is Xevan mining, only Solaris ?.. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Elder III on November 16, 2017, 05:12:31 AM is it now better to mine with this new improved miner on a 1080 ti compared to mining ZCASH with it, what is the cash value of 6mh mining power / month / card ?.. What is Xevan mining, only Solaris ?.. Solaris, Amsterdam, Vsync, and Bitsend (the original Xevan coin).... there are at least a couple of others that I can't think of at the moment. It's been a popular coin this autumn, with those 3 coins all either starting new with Xevan, or forking from a different algorithm to Xevan. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: henrynguyen on November 16, 2017, 06:00:34 PM My asus rog stix 1080TI is about 5mh/s.
Who can hepl me overlooking MSI? Xevan use core lock or memory ? Now, I set : core +200 mem +100 Sr I'm bad in English Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stevascha on December 01, 2017, 05:37:02 PM doing good, my aorus extreme get 6mhs, thanks alot!! Wow. 1080 ti or just 1080? 1080ti man any benchmark & setup intensity for gtx 1060 3gb? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ShowMeCoins on December 01, 2017, 08:04:10 PM doing good, my aorus extreme get 6mhs, thanks alot!! Wow. 1080 ti or just 1080? 1080ti man any benchmark & setup intensity for gtx 1060 3gb? Any other yiimp pool will do Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Vispilio on December 03, 2017, 06:08:25 PM doing good, my aorus extreme get 6mhs, thanks alot!! whoa isn't 6mhs extreme bro :) ? what a powerful miner this is, how much cash is being generated with this miner on a 1080 ti ?.. Be kind enough to tell me the coin you've mined over the course of last month with x amount of 1080ti's and how much it's worth now... Thanks in advance. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Helios45 on December 16, 2017, 10:54:17 PM I'm mining a Xevan coin using this miner and I'm getting more than 2% rejected shares in the last 24 hours, any idea what can be causing this?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Elder III on December 16, 2017, 11:05:54 PM I'm mining a Xevan coin using this miner and I'm getting more than 2% rejected shares in the last 24 hours, any idea what can be causing this? Well my first thought is that perhaps you have your overclock too high, or you need to lower your intensity in the miner. Also, have you tried a different pool to see if the reject rate is the same? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Helios45 on December 16, 2017, 11:24:13 PM I'm mining a Xevan coin using this miner and I'm getting more than 2% rejected shares in the last 24 hours, any idea what can be causing this? Well my first thought is that perhaps you have your overclock too high, or you need to lower your intensity in the miner. Also, have you tried a different pool to see if the reject rate is the same? Thanks for the tips, I will try lowering my OC settings, if it doesn't help I'll give the intensity a try Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Bluecheese on December 18, 2017, 09:09:46 PM Hey thanks for the support of Xevan for nvidia. I'm glad I waited to try this out.
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: NetopyrMan on January 04, 2018, 11:10:46 AM wierd ...
- mixed rig 4x1070 + 1x1080ti makes 3,3MH/per 1070 -i 20 and +-5,5MH on 1080ti -i 19 (ok) - rig with 5x1070ti makes 3950kH per card, -i 19 (ok) - BUT rig with 6x1070ti ... 5 cards makes 3850Kh and 1 makes 3730 .... lower OC clocks vs 5gpu rig due to illegal memory access OR illegal instruction, -i used def or 16-22 ... and to make it stable i must make 4 threads: 1x3gpu(-i default) and 3x1gpu(2x -i default, 1x -i 18) ... at least it has a positive impact on swap ... takes only 10g instead of 30g edited: and pool shows 5-10% lower hashrate in total then should be (bsod.pw) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: RogerSally on January 10, 2018, 12:40:11 AM I think he mean separate instances and miners :)
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on January 12, 2018, 06:24:09 PM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. https://github.com/krnlx/ccminer-xevan Donations are welcome. UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti UPD2. Windows version by Palgin x86_64 https://mega.nz/#!NhhnGahJ!dGC_LNOi_a98BuHSuLZQB7k-YT-dM7I_We_svn1hCc0 x86 https://mega.nz/#!98xj3RyD!tfWT6yKHb7gQhzJMi0YYx7wwIX75wppE3Hw7grcMR-4 When you planing to update your miner? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: BitBustah on January 12, 2018, 06:29:41 PM "GPU#0:ASUS GTX 1080 Ti, 6218.11kH/s"
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Jimm3h on January 18, 2018, 12:05:40 PM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. https://github.com/krnlx/ccminer-xevan Donations are welcome. UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti UPD2. Windows version by Palgin x86_64 https://mega.nz/#!NhhnGahJ!dGC_LNOi_a98BuHSuLZQB7k-YT-dM7I_We_svn1hCc0 x86 https://mega.nz/#!98xj3RyD!tfWT6yKHb7gQhzJMi0YYx7wwIX75wppE3Hw7grcMR-4 When you planing to update your miner? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Mr.Spider703 on January 24, 2018, 06:17:31 AM updates will most likely not be, the maximum is already squeezed out, according to Palgin
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on January 24, 2018, 08:08:05 AM updates will most likely not be, the maximum is already squeezed out, according to Palgin Palgin is wrong. I have a mod that does +10% Simd/groestl rewrite Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Mr.Spider703 on January 24, 2018, 09:09:33 AM updates will most likely not be, the maximum is already squeezed out, according to Palgin Palgin is wrong. I have a mod that does +10% Simd/groestl rewrite Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sp_ on January 24, 2018, 12:33:55 PM maybe there is only someone trying to sell it for 0.05 btc in difference from the version of Palgin and Krnlx 0.05? No. more than 1 bitcoin. +++ Palgin is not doing any opensource anymore. Check out his slow Neoscrypt/hsr miner with opensource violation and a fee. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Mr.Spider703 on January 25, 2018, 05:20:13 AM maybe there is only someone trying to sell it for 0.05 btc in difference from the version of Palgin and Krnlx 0.05? No. more than 1 bitcoin. +++ Palgin is not doing any opensource anymore. Check out his slow Neoscrypt/hsr miner with opensource violation and a fee. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: crocozino on January 25, 2018, 05:25:34 AM maybe there is only someone trying to sell it for 0.05 btc in difference from the version of Palgin and Krnlx 0.05? No. more than 1 bitcoin. +++ Palgin is not doing any opensource anymore. Check out his slow Neoscrypt/hsr miner with opensource violation and a fee. all other version are slower then that, and nobody will even consider your version for 1 btc or something like that cause it is better just leave btc and use free fast miner and gets more profit, then spend 1btc on your miner and get 5% more speed Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: d0n4ald on January 30, 2018, 03:13:02 AM what core clock and mem settings for 1080ti and 1070ti using this krnlx ccminer for xevan algo?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: d0n4ald on January 30, 2018, 04:46:11 PM I guess this krnlx ccminer no longer being updated.
But still works for xevan 2 1080ti and 1 1070ti getting about 14.2 mh However I don't see what each individual card is doing Does my hash rate sound good? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Helios45 on January 30, 2018, 05:27:47 PM I guess this krnlx ccminer no longer being updated. But still works for xevan 2 1080ti and 1 1070ti getting about 14.2 mh However I don't see what each individual card is doing Does my hash rate sound good? I get 11mh with three 1070 TI's running at 60% TDP Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: d0n4ald on January 30, 2018, 06:51:20 PM I guess this krnlx ccminer no longer being updated. But still works for xevan 2 1080ti and 1 1070ti getting about 14.2 mh However I don't see what each individual card is doing Does my hash rate sound good? I get 11mh with three 1070 TI's running at 60% TDP Seems like I'm getting low hashrate then I'm at 80% tdp. +135+700 Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Helios45 on January 30, 2018, 06:52:57 PM I guess this krnlx ccminer no longer being updated. But still works for xevan 2 1080ti and 1 1070ti getting about 14.2 mh However I don't see what each individual card is doing Does my hash rate sound good? I get 11mh with three 1070 TI's running at 60% TDP Seems like I'm getting low hashrate then I'm at 80% tdp. +135+700 Try higher core, I run mine at +200 and less memory Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: sean808080 on January 31, 2018, 03:56:18 PM My 2 rigs were running this miner just fine until I added a new card to fill out the second rig.
Now only this rig is consistently crashing with the error: Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure. I've tried removing OC, lower intensity and have had no luck. Both rigs are now at 6 cards mixing 1070TIs and 1070s. Any ideas? Thx! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: tritonchev89 on February 02, 2018, 02:54:01 PM can anybody share a Afterburner optimal overcloking setings for card Gigabyte GeForce GTX 1060 Windforce OC 6GB GDDR5 with hynix memory
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Mr.Spider703 on February 03, 2018, 04:26:22 AM can anybody share a Afterburner optimal overcloking setings for card Gigabyte GeForce GTX 1060 Windforce OC 6GB GDDR5 with hynix memory PL 75-80 mem 550-600 core 150try this Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: DeadAbrasiveness on February 03, 2018, 10:37:06 AM Surprised not to see a virustotal result shared here for this miner.
Scores 23/66: https://www.virustotal.com/#/file/f8b2120127c88ec8d91f59305e6f1c5c18b2c614b0e68643701849a01874ff1d/detection Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: NameTaken on February 03, 2018, 11:06:08 AM Surprised not to see a virustotal result shared here for this miner. You can view source code on Github and compile it yourself.Scores 23/66: https://www.virustotal.com/#/file/f8b2120127c88ec8d91f59305e6f1c5c18b2c614b0e68643701849a01874ff1d/detection Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: d0n4ald on February 03, 2018, 12:28:42 PM Surprised not to see a virustotal result shared here for this miner. Scores 23/66: https://www.virustotal.com/#/file/f8b2120127c88ec8d91f59305e6f1c5c18b2c614b0e68643701849a01874ff1d/detection This miner has viruses? What does the virus do? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: fanon on February 07, 2018, 06:39:46 PM Surprised not to see a virustotal result shared here for this miner. Scores 23/66: https://www.virustotal.com/#/file/f8b2120127c88ec8d91f59305e6f1c5c18b2c614b0e68643701849a01874ff1d/detection This miner has viruses? What does the virus do? Every miner is flagged as a virus. You can thank malware authors for using mining software in their malware. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Asgeirsk on February 10, 2018, 01:31:52 PM New coin, Ellerium coming tonight. Cant wait to try out this miner :)
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: thecoder2012 on February 11, 2018, 12:44:50 PM New coin, Ellerium coming tonight. Cant wait to try out this miner :) Yes. You can use urals (https://bitcointalk.org/index.php?topic=2369658.0) coin as pre-test for xevan.Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ManuBBXX on February 14, 2018, 12:01:13 PM I only get 5.2 mh/s per 1080ti
Is there a better miner released ? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: buddy123 on February 17, 2018, 08:31:58 AM I havent been able to compile it for ubuntu 16.04.
I have 1080TI and cuda 9.1 installed, with nvidia-390 drivers. I get an error: Code: ccminer.cpp:45:26: fatal error: cuda_runtime.h: No such file or directory I know that other miners, like ccminer, requires editing the nvcc version and keeping only sm_61 for my graphics card, but in Makefile.am its not even listed. I tried to add manually, but stumble to the same error. Anyone have a clue about that? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: 95dram on February 20, 2018, 01:01:47 AM I havent been able to compile it for ubuntu 16.04. I have 1080TI and cuda 9.1 installed, with nvidia-390 drivers. I get an error: Code: ccminer.cpp:45:26: fatal error: cuda_runtime.h: No such file or directory I know that other miners, like ccminer, requires editing the nvcc version and keeping only sm_61 for my graphics card, but in Makefile.am its not even listed. I tried to add manually, but stumble to the same error. Anyone have a clue about that? I had the same problem. after hours of banging my head off the wall I found the configure.sh file was looking for cuda 7.5. I just changed it to my current version and bingo off to the races Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Rc-BtcZmining on February 27, 2018, 12:49:52 AM My 2 rigs were running this miner just fine until I added a new card to fill out the second rig. Now only this rig is consistently crashing with the error: Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure. I've tried removing OC, lower intensity and have had no luck. Both rigs are now at 6 cards mixing 1070TIs and 1070s. Any ideas? Thx! Hi Friend , I also have the same problem , my rig has 8 cards 1070ti and the miner is krnlx/ccminer-xevan but in the last three days i have the same error,, Have you could to solve this trouble? Thanks if you could share something with me. ;D Title: Nvidia xevan miner GPU0: NONCE FOUND is that a problem? Post by: lir3000 on February 27, 2018, 10:29:57 AM Hi all!
Ubuntu 16.04 LTS, Cuda 8.0, Nvidia Xserver (prefer high performance), 5 x 1060 3Gb Gigabyte ccMiner today biuld from Github. readme.txt: release 1.7.1 (Jan 2015) "Sibcoin & Whirlpool midstate" sudo ./ccminer -a xevan -o stratum+tcp://stratum.gos.cx:3738 -u xxx -p c=XHM 2018-02-27 13:16:01] GPU#0:NONCE FOUND [2018-02-27 13:16:01] GPU#1:target 0 ffc00000 3f [2018-02-27 13:16:01] GPU#1:target 3fffc00000 [2018-02-27 13:16:01] [S/A/T]: 0/304/304, diff: 0.036, 9832.42kH/s yes! [2018-02-27 13:16:08] GPU#0:NONCE FOUND [2018-02-27 13:16:08] GPU#2:GeForce GTX 1060 3GB, 1981.43kH/s [2018-02-27 13:16:08] GPU#2:target 0 ffc00000 3f [2018-02-27 13:16:08] GPU#2:target 3fffc00000 [2018-02-27 13:16:08] [S/A/T]: 0/305/305, diff: 0.018, 9831.88kH/s yes! [2018-02-27 13:16:10] GPU#0:NONCE FOUND [2018-02-27 13:16:10] GPU#0:target 0 ffc00000 3f [2018-02-27 13:16:10] GPU#0:target 3fffc00000 [2018-02-27 13:16:10] [S/A/T]: 0/306/306, diff: 0.025, 9831.53kH/s yes! [2018-02-27 13:16:11] GPU#0:NONCE FOUND [2018-02-27 13:16:11] GPU#4:GeForce GTX 1060 3GB, 1964.88kH/s [2018-02-27 13:16:11] GPU#4:target 0 ffc00000 3f [2018-02-27 13:16:11] GPU#4:target 3fffc00000 [2018-02-27 13:16:11] [S/A/T]: 0/307/307, diff: 0.293, 9831.06kH/s yes! What does it mean GPU#0:NONCE FOUND? (marked in red) Does it even work (gpu 0)? WBR. Title: Re: Nvidia xevan miner GPU0: NONCE FOUND is that a problem? Post by: NetopyrMan on March 02, 2018, 07:37:34 AM What does it mean GPU#0:NONCE FOUND? (marked in red) Does it even work (gpu 0)? dont worry ... its same like block found Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: KriptoFull on March 04, 2018, 04:47:18 PM Tell me, how can I download the miner haven for Windows!The link from the main page does not work?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: crocozino on March 04, 2018, 05:07:37 PM I guess this krnlx ccminer no longer being updated. But still works for xevan 2 1080ti and 1 1070ti getting about 14.2 mh However I don't see what each individual card is doing Does my hash rate sound good? yes, it is a pity this great miner stopped to be updated, I hope there could be some more improvements to be achieved maybe tpruvot could look further into in and get it done? dont't no.. but still this is the best miner we have for xevan for nv cards... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: extravizor on March 04, 2018, 09:09:02 PM hello guys
i try use --quiet and some another --plimit= --tlimit=85 --max-temp= not work miner just not accept this command... command worked well --no-color disable colored output just very need --quiet and --tlimit or --max-temp today freezee afterbernet and temp go to 80C.. in another miner Ccminer on another algo no this problem Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Zheko87 on March 05, 2018, 04:31:30 PM What intensivety better for p106-100 and 1066?
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: barista1992 on March 11, 2018, 08:24:30 PM Hey, guys!
Are you planned to make compiler for Ubuntu? Thanks! Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Kelsier on March 14, 2018, 04:57:50 AM anyone have the problem where the miner closes after a few minutes - every time? I'm not entirely sure what the error or if there even is one displayed because the command prompt disappears too quickly.
I do have some slight overclock on my gpus but most other algos with various other miners seem to mine fine. Was just wondering if anyone else had this problem and figured out what was going on. Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: criptooo on March 15, 2018, 11:28:23 AM güzel miner ++++
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Shelltux on March 18, 2018, 03:37:34 PM I created an pull request because the xevan-ccminer does not compile with OpenSSL >= 1.1.0.
https://github.com/krnlx/ccminer-xevan/pull/11 (https://github.com/krnlx/ccminer-xevan/pull/11) Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Shelltux on March 18, 2018, 03:51:49 PM anyone have the problem where the miner closes after a few minutes - every time? I'm not entirely sure what the error or if there even is one displayed because the command prompt disappears too quickly. I do have some slight overclock on my gpus but most other algos with various other miners seem to mine fine. Was just wondering if anyone else had this problem and figured out what was going on. How do yo start the miner? Are you using Windows or Linux? I would guess Windows ;). Can you put in the script you are using to start the miner? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: Shelltux on March 18, 2018, 08:01:31 PM I more or less randomly faced the following error:
Code: Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure. After some Google'ing there are some people stating that this has something todo with over or underclocking the GPU's. My 1080Rig is overclocked so I build myself the following systemd file to enable the watchdog function which in case restarts the xevan-ccminer: Code: [Unit] This can possibly help someone ... Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: livewacn5785 on April 05, 2018, 06:32:52 AM Can someone share ccmner/krnlx-enemy.mod01? Please private message to me
Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: stas260385 on April 10, 2018, 10:28:01 AM Hi all! This is prealpha version of my xevan miner. Tested only on linux, cuda 7.5 and 1070 & 1080ti. https://github.com/krnlx/ccminer-xevan Donations are welcome. UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti UPD2. Windows version by Palgin x86_64 https://mega.nz/#!NhhnGahJ!dGC_LNOi_a98BuHSuLZQB7k-YT-dM7I_We_svn1hCc0 x86 https://mega.nz/#!98xj3RyD!tfWT6yKHb7gQhzJMi0YYx7wwIX75wppE3Hw7grcMR-4 Hey, krnlx! Any chance to rewrite/improve performance Xevan algo? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ganzocrypt on April 19, 2018, 01:22:46 PM My 2 rigs were running this miner just fine until I added a new card to fill out the second rig. Now only this rig is consistently crashing with the error: Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure. I've tried removing OC, lower intensity and have had no luck. Both rigs are now at 6 cards mixing 1070TIs and 1070s. Any ideas? Thx! Hi Friend , I also have the same problem , my rig has 8 cards 1070ti and the miner is krnlx/ccminer-xevan but in the last three days i have the same error,, Have you could to solve this trouble? Thanks if you could share something with me. ;D same issue with 1070TI freezing PC, fan 100% Any suggestions? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: ruplikminer on May 07, 2018, 06:25:51 AM Can someone share ccmner/krnlx-enemy.mod01? Please private message to me yes please...anyone have the ccminer/krnlx-enemy.mod01 miner? Title: Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE Post by: paulus59 on August 25, 2018, 02:53:54 PM hello there,
if you have problems like : "Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure" the problem is your intensity is set to high , lower intensity then try again , it will work i am playing with this miner on a MSI GTX 750 2 GB and get with algo xevan : 548.60 KH/s ! not bad for an GTX 750 2GB and its not the i version [edit] this error "Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure , has to do with your memory allocation clock on your GPU/CPU Question >: can some one ex plain what this means in the miner > : [S/A/T]: 0/246/246, diff: |