|
Title: Antminer Scrypt Miner Baikal Fan Duct Cooling Shroud Post by: xxxABJxxx on October 06, 2017, 05:57:09 PM Just replace the fan guard with this adapter. Now you can add a vent tube with the cable tie to low your room temperature.
The exhaust hose move the heat away or redirects them to a ventilator, a window or attic. When the room temperature decreases, miner temperature sink significantly. This duct can be used on any standart 120mm fan. The adapter has a lip on the hose connection side. Thus the hose can not slide down after the hose is attached with the cable tie. The 100mm adapter is a long version for a better air management. Solid Print in PETG (more temperature resistant than PLA) This ducts can be used on any standart 120mm fan. Worldwide shipping inlcuded in delivery: Adapter (i have 3 sizes): - 4 inch / 100mm - 5 inch / 125mm - 120mm +Cable tie https://retro-emulation.com/shop/img/p/1/1/6/116-thickbox_default.jpg https://retro-emulation.com/shop/img/p/1/1/7/117-thickbox_default.jpg https://retro-emulation.com/shop/img/p/1/2/1/121-thickbox_default.jpg https://retro-emulation.com/shop/index.php?id_category=17&controller=category&id_lang=1 Title: Re: Antminer Scrypt Miner Baikal Fan Duct Cooling Shroud Post by: xxxABJxxx on December 16, 2017, 07:50:33 AM I have a new Version : Shroud to 6 Inch / 150mm Vent tube.
https://retro-emulation.com/shop/index.php?id_product=48&controller=product&id_lang=1 https://retro-emulation.com/shop/img/p/1/7/4/174-large_default.jpg |
