|
Title: Share Found but no Share Accepted Post by: davemanet on October 21, 2017, 06:45:21 AM Hi All,
I have some ETH rigs mining. I see that it says "Shares Found" but never do they say "Shares Accepted". Is this something to worry about? ETH: 10/21/17-08:40:43 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:40:52 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:40:59 - SHARE FOUND - (GPU 2) ETH: 10/21/17-08:41:00 - SHARE FOUND - (GPU 3) ETH: 10/21/17-08:41:03 - SHARE FOUND - (GPU 6) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:10 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:41:18 - SHARE FOUND - (GPU 0) ETH: 10/21/17-08:41:27 - SHARE FOUND - (GPU 4) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:44 - SHARE FOUND - (GPU 7) ETH: 10/21/17-08:41:59 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 6) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:42:06 - SHARE FOUND - (GPU 0) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=53C fan=20% Title: Re: Share Found but no Share Accepted Post by: smoolae on October 21, 2017, 08:58:22 AM Hi All, I have some ETH rigs mining. I see that it says "Shares Found" but never do they say "Shares Accepted". Is this something to worry about? ETH: 10/21/17-08:40:43 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:40:52 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:40:59 - SHARE FOUND - (GPU 2) ETH: 10/21/17-08:41:00 - SHARE FOUND - (GPU 3) ETH: 10/21/17-08:41:03 - SHARE FOUND - (GPU 6) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:10 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:41:18 - SHARE FOUND - (GPU 0) ETH: 10/21/17-08:41:27 - SHARE FOUND - (GPU 4) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:44 - SHARE FOUND - (GPU 7) ETH: 10/21/17-08:41:59 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 6) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:42:06 - SHARE FOUND - (GPU 0) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=53C fan=20% Are You using Nanopool? If so, I had the same problem. I resolved it by disabling the WiFi adapter and using straight Ethernet cable :) Sadly Nanopool does not show Stale Shares :( All the best! Title: Re: Share Found but no Share Accepted Post by: davemanet on October 21, 2017, 03:55:20 PM Hi All, I have some ETH rigs mining. I see that it says "Shares Found" but never do they say "Shares Accepted". Is this something to worry about? ETH: 10/21/17-08:40:43 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:40:52 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:40:59 - SHARE FOUND - (GPU 2) ETH: 10/21/17-08:41:00 - SHARE FOUND - (GPU 3) ETH: 10/21/17-08:41:03 - SHARE FOUND - (GPU 6) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:10 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:41:18 - SHARE FOUND - (GPU 0) ETH: 10/21/17-08:41:27 - SHARE FOUND - (GPU 4) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:44 - SHARE FOUND - (GPU 7) ETH: 10/21/17-08:41:59 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 6) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:42:06 - SHARE FOUND - (GPU 0) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=53C fan=20% Are You using Nanopool? If so, I had the same problem. I resolved it by disabling the WiFi adapter and using straight Ethernet cable :) Sadly Nanopool does not show Stale Shares :( All the best! Thank you for the suggestion! I'm using a pretty fast Ethernet connection already. Any other possible ideas? Title: Re: Share Found but no Share Accepted Post by: smoolae on October 21, 2017, 04:08:55 PM Hi All, I have some ETH rigs mining. I see that it says "Shares Found" but never do they say "Shares Accepted". Is this something to worry about? ETH: 10/21/17-08:40:43 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:40:52 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:40:59 - SHARE FOUND - (GPU 2) ETH: 10/21/17-08:41:00 - SHARE FOUND - (GPU 3) ETH: 10/21/17-08:41:03 - SHARE FOUND - (GPU 6) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:10 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:41:18 - SHARE FOUND - (GPU 0) ETH: 10/21/17-08:41:27 - SHARE FOUND - (GPU 4) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:44 - SHARE FOUND - (GPU 7) ETH: 10/21/17-08:41:59 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 6) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:42:06 - SHARE FOUND - (GPU 0) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=53C fan=20% Are You using Nanopool? If so, I had the same problem. I resolved it by disabling the WiFi adapter and using straight Ethernet cable :) Sadly Nanopool does not show Stale Shares :( All the best! Thank you for the suggestion! I'm using a pretty fast Ethernet connection already. Any other possible ideas? Just check that Your Internet latency is in reasonable limits :) Title: Re: Share Found but no Share Accepted Post by: davemanet on October 21, 2017, 05:08:24 PM Hi All, I have some ETH rigs mining. I see that it says "Shares Found" but never do they say "Shares Accepted". Is this something to worry about? ETH: 10/21/17-08:40:43 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:40:52 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:40:59 - SHARE FOUND - (GPU 2) ETH: 10/21/17-08:41:00 - SHARE FOUND - (GPU 3) ETH: 10/21/17-08:41:03 - SHARE FOUND - (GPU 6) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:10 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:41:18 - SHARE FOUND - (GPU 0) ETH: 10/21/17-08:41:27 - SHARE FOUND - (GPU 4) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=52C fan=20% ETH: 10/21/17-08:41:44 - SHARE FOUND - (GPU 7) ETH: 10/21/17-08:41:59 - SHARE FOUND - (GPU 1) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 6) ETH: 10/21/17-08:42:05 - SHARE FOUND - (GPU 4) ETH: 10/21/17-08:42:06 - SHARE FOUND - (GPU 0) GPU0 t=49C fan=20%, GPU1 t=52C fan=20%, GPU2 t=51C fan=20%, GPU3 t=50C fan=20%, GPU4 t=47C fan=20%, GPU5 t=55C fan=20%, GPU6 t=4 8C fan=20%, GPU7 t=53C fan=20% Are You using Nanopool? If so, I had the same problem. I resolved it by disabling the WiFi adapter and using straight Ethernet cable :) Sadly Nanopool does not show Stale Shares :( All the best! Thank you for the suggestion! I'm using a pretty fast Ethernet connection already. Any other possible ideas? Just check that Your Internet latency is in reasonable limits :) what's weird is some rigs of mine work, some do not. they are all sharing same connection :/ Title: Re: Share Found but no Share Accepted Post by: Dlugina23 on October 21, 2017, 05:31:48 PM Change the pool.
Title: Re: Share Found but no Share Accepted Post by: ROFLED on October 21, 2017, 06:04:46 PM Sharing connection it's not in case. Check if you mine on same worker
|