Title: RATE MY SETUP 6X Red Dragon RX570 (elpida) Post by: r3lentleSs on October 24, 2017, 10:39:14 AM **Specifictations**
Windows 10 PRO 64 bit with 17.10.1 Crimson AMD drivers and Sapphire trixx. - Intel Pentium CPU G4400 @ 3.3GHz I'm getting around ~1800 H/s. Powerconsumption at the wall is around ~885w- 2 x 4 GB DDR4 Crucial - GA-H110-D3A - 1000w 80+ - 6 x RX570 Red Draong (elpida) I just followed the settings of somebody else who's actually getting 318 per card. CoreClock = 1325 - MemoryClock 2000 - GPU Voltage -96 and -15% Power Limit What can i do more to higher my hashrate without highering my PSU consumption. ERROR:I'm getting GPU#4 returned incorrect data ---> Solution? https://i.imgur.com/hR3rYmI.png Title: Re: RATE MY SETUP 6X Red Dragon RX570 (elpida) Post by: philipma1957 on October 24, 2017, 12:22:22 PM **Specifictations** Windows 10 PRO 64 bit with 17.10.1 Crimson AMD drivers and Sapphire trixx. - Intel Pentium CPU G4400 @ 3.3GHz I'm getting around ~1800 H/s. Powerconsumption at the wall is around ~885w- 2 x 4 GB DDR4 Crucial - GA-H110-D3A - 1000w 80+ - 6 x RX570 Red Draong (elpida) I just followed the settings of somebody else who's actually getting 318 per card. CoreClock = 1325 - MemoryClock 2000 - GPU Voltage -96 and -15% Power Limit What can i do more to higher my hashrate without highering my PSU consumption. ERROR:I'm getting GPU#4 returned incorrect data ---> Solution? https://i.imgur.com/hR3rYmI.png it is an okay card not a great one. try the settings below memoryclock to 1975 coreclock to 1320 gpu volts to -90 power limit to -12% check the total hash and watts after a few hours see if that error goes away. too high ram does that. your 300 x 6 = 1800 is okay I am trying to get it more stable 1800/885 = 2.0338 to 1 lets see what my settings do Title: Re: RATE MY SETUP 6X Red Dragon RX570 (elpida) Post by: r3lentleSs on October 24, 2017, 12:52:19 PM Thanks i'll try your setting when i get home.
I'll update the stats. |