|
Title: Asrock H110 pro btc+ (Problem) Post by: Roliaz on November 23, 2017, 08:59:36 PM Greetings, friends
I bought an Asrock H110 pro btc + board that has 13 PCI-e slots, the problem is that in windows10-64bit and Linux it only detects 6 cards. I do not know if someone has had the same problem and can help me. The configuration of the rig is: Motherboard Asrock h110 pro btc + 8 AMD RX560 cards - 45w 900Wat 80Gold power supply Dualcore G4400 processor 4GB of ram ddr4 Thanks greetings. Title: Re: Asrock H110 pro btc+ (Problem) Post by: Bakhtra on November 24, 2017, 10:24:18 AM Greetings, friends What windows that you use? R3 1709? And for driver you need to use at least 17.11.1 or 17.11.2.I bought an Asrock H110 pro btc + board that has 13 PCI-e slots, the problem is that in windows10-64bit and Linux it only detects 6 cards. I do not know if someone has had the same problem and can help me. The configuration of the rig is: Motherboard Asrock h110 pro btc + 8 AMD RX560 cards - 45w 900Wat 80Gold power supply Dualcore G4400 processor 4GB of ram ddr4 Thanks greetings. Title: Re: Asrock H110 pro btc+ (Problem) Post by: cod3gen on November 24, 2017, 06:57:36 PM Since its both Windows and Linux problem, i would check your pcie risers. Make sure they all have power, both risers and gpus.
Title: Re: Asrock H110 pro btc+ (Problem) Post by: joshuajones02 on November 24, 2017, 07:35:41 PM I have this board and use nvOC ubuntu/linux mod. Runs great but I don't use all 12 slots think my largest one has 10 on it. If your cards arent registering it sounds like a PCIe riser... i'd plug in each one individually until one doesn't get recognize and then switch out a riser until it doesnt work and or move one of the "believe-to-be" not working riser to one of the working cards and see if it works, etc. until you can figure out the real problem.
|