Bitcoin Forum

Bitcoin => Mining support => Topic started by: bdf on December 25, 2017, 02:37:17 PM



Title: Avalon 741 Operation
Post by: bdf on December 25, 2017, 02:37:17 PM
Hello

I have two 741s. Each powered by 1600W PSU. I have been running them for 2 months now.

Randomly, one or the other of the two units stops hashing. I reset the power and it begins hashing again. This has occurred about 8 times since I put these on the network.

2nd item is that both of mine hash at 6 - 6.5 THS.

I must be missing something with proper setup.

Anyone have any suggestions or comments?

Thanks in advance. Merry Christmas!


Title: Re: Avalon 741 Operation
Post by: Didley1JT on December 25, 2017, 10:08:54 PM
Do you have the latest firmware from Canaan? And do you have them connected to wifi or hard-wired?


Title: Re: Avalon 741 Operation
Post by: bdf on December 28, 2017, 06:19:46 AM
I thought I had the latest firmware, but I'll need to recheck that.

They are hardwired.

I will post if anything changes after checking thru the firmware.

Thanks!


Title: Re: Avalon 741 Operation
Post by: fanatic26 on December 28, 2017, 11:52:12 PM
I would look at the logs after this happens (before you restart it obv) to see why the hash board has stopped in the first place.


Title: Re: Avalon 741 Operation
Post by: Steamtyme on December 29, 2017, 05:40:43 PM
Is there a chance that you have a circuit issue?

what is your setup from start to finish, are you on 220 or 110 volt?