Title: S9 problem - no BMMiner version or Hardware version, stuck at ASIC section Post by: Loxiee on December 25, 2017, 03:45:58 PM Hey Guys,
So I had this Antminer S9 (December, 2017 Batch, 14TH) working fine for a day. I shut it down and when I turned it back on the next day, it doesn't give me the Hardware Version or BMMiner version. The error I'm receiving in the Kernel Log is: Code: check chain[5]: asicNum = 63 I don't have any red lights, the ethernet cables all light up and the Hash boards light up in red occasionally while only 2 of the 3 staying on. Any ideas or fixes I can do? So far, I try to flash the firmware but it keeps saying incorrect firmware. I have reset via the reset button, software reset and also IP reset and no go with all. I appreciate any direction you guys can give me. Thanks. (Moderator note: This post was edited by frodocooper to use code tags for the log output and to reduce the amount of unnecessary white space.) Title: Re: S9 problem - no BMMiner version or Hardware version, stuck at ASIC section Post by: Loxiee on December 26, 2017, 11:15:19 PM Anyone?
I still have this Miner that dies out right after that, it does not hash at all, whether I am running it for 10 minutes or 10 hours. I've tried leaving it on all day and no go. Title: Re: S9 problem - no BMMiner version or Hardware version, stuck at ASIC section Post by: fanatic26 on December 27, 2017, 12:24:08 AM It shows that one of your boards is failing. It should read 63 chips but board '7' is only showing 59
|